motors made easy · electric motors brochure—2019 v.3 1 hp—600 hp general purpose cast iron...

Motors Made Easy

General Purpose Motors Special Purpose Motors

Accessories

naemotors.com 800.884.0404 © 6/19 North American Electric, Inc. Electric Motors Brochure—2019 v.3

Controls Motors Gear Reducers

MISSION STATEMENT To provide complete automa on solu ons for the United States and interna onal market with products and service that meet or exceed customer expecta ons for quality, performance, and reliability at the lowest possible cost and delivered within the customer’s schedule, through our authorized distribu on network.

COMPANY HISTORY In 1993, North American Electric began sourcing high quality, high performance electric motors and gearing from around the world and distributed them on a na onal and interna onal level. In 2014, we opened our NAE Motor Controls division enabling us to offer our wholesale distribu on network complete automa on solu ons.

3


GENERAL PURPOSE INVERTER DUTY MOTORS 1 HP—300 HP; 2, 4, 6 or 8‐Pole NEMA Design B Totally Enclosed Fan Cooled or Open Drip Proof Inverter Duty (20:1 VT; 10:1 CT)

ALUMINUM FRAME INVERTER DUTY MOTORS 1 HP—10 HP; 2 or 4‐Pole Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)

ROUND BODY MOTORS 1 HP—30 HP; 4‐Pole; 1800 RPM C‐Flange without Feet Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)

SINGLE PHASE, 56C FRAME, TEFC 1/3 HP—2 HP; 2 or 4‐Pole High Starting Torques Capacitor Start / Capacitor Run Design Rolled Steel Construction Removable Feet

SINGLE PHASE, FARM DUTY, TEFC 1/3 HP—10 HP; 2 or 4‐Pole High Starting Torques Manual Overload Protection (1/3 HP—5 HP) Capacitor Start / Capacitor Run Design Rolled Steel Construction

SINGLE PHASE, OPEN DRIP PROOF 3 HP–5 HP; 2 or 4‐Pole High Starting Torque Capacitor Start / Capacitor Run Design Rolled Steel Construction

THREE‐PHASE, 56C FRAME, TEFC 1/3 HP—3 HP; 2 or 4‐Pole High Starting Torque Rolled Steel Construction Removable Feet

THREE‐PHASE, TEFC 1 HP—10 HP; 2 or 4‐Pole High Starting Torque Rolled Steel Construction

THREE‐PHASE, OPEN DRIP PROOF 1 HP—20 HP; 2 or 4‐Pole High Starting Torque Rolled Steel Construction

STAINLESS STEEL WASHDOWN DUTY MOTORS 1/3 HP—20 HP; 2, 4 or 6‐Pole C‐Flange w/ Feet or Round Body Inverter Duty (20:1 VT; 10:1 CT)

CLOSE COUPLED PUMP MOTORS 1 HP—75 HP; 2 or 4‐Pole Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT)

EXPLOSION PROOF MOTORS 1—250 HP; 2, 4 or 6‐Pole All Motors Meet or Exceed UL 674 Specification As Required By OSHA For Installation and Use In Hazardous Locations Totally Enclosed Explosion Proof Inverter Rated (10:1 VT; 5:1 CT)

OIL WELL PUMP MOTORS, TEFC 2 HP—150 HP; 6 or 8‐Pole NEMA Design D; High Slip (5%—8% Slip) Special Purpose Oil Well Pump Motors Inverter Duty (20:1 VT; 10:1 CT)

OIL WELL PUMP MOTORS, ODP 7.5 HP—100 HP; 6‐Pole NEMA Design D; High Slip (5%—8% Slip) Special Purpose Oil Well Pump Motors Inverter Duty (20:1 VT; 10:1 CT)

VERTICAL HOLLOW SHAFT PUMP MOTORS 10 HP—500 HP; 4‐Pole Extra High Thrust / Double Stacked Bearings Available Inverter Rated (10:1 VT) or Inverter Duty (20:1 VT)

ROTARY UNIT FOR ROTARY PHASE CONVERTER 3 HP—60 HP; 4‐Pole For Use with Rotary Phase Converters To Run Three Phase Equipment From Single Phase Power Totally Enclosed Fan Cooled

SHAFT MOUNT REDUCERS & ACCESSORIES 2—10 Box Size Gear Ratios: 15:1 or 25:1 Screw Conveyor Adaptors Available Repair Kits Also Available

MOTOR CONTROLS: SAFETY SWITCHES ACROSS THE LINE STARTERS PART WIND STARTERS SOFT STARTERS VFDs

MOTOR SLIDE BASES Available 56—505U Frame Single‐Adjusting Screw Type (56—145T Frame) Double‐Adjusting Screw Type (182T—505U Frame)

CRUSHER DUTY MOTORS 1 HP—600 HP; 4, 6 or 8‐Pole NEMA Design C Totally Enclosed Fan Cooled Inverter Duty (20:1 VT; 10:1 CT) (1 HP—300 HP) Inverter Rated (10:1 VT; 5:1 CT) (250 HP—600 HP)

4


1 HP—600 HP GENERAL PURPOSE

CAST IRON

143T—586/7UZ FRAME THREE‐PHASE

TEFC

General Purpose—Heavy Duty Cast Iron Three‐Phase, 143T—586/7UZ Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) (1 HP—300 HP)

NEMA MG‐1, PART 31, TABLE 12‐12 (unless otherwise noted)

CLASS II, DIV II GROUPS F & G

Inverter Rated (10:1 VT; 5:1 CT) (350 HP—600 HP)

CLASS I, DIV II GROUPS ABCD, T2B

Standard Features Include: ❶ 1 HP—600 HP in Stock

❷ 1.15 Service Factor @ 60 Hertz; 1.0 Service Factor @ 50 Hertz;

Suitable for 575V @ 1.0 Service Factor

❸ Sealed Bearings Through 215T Frame;

Regreasable Open Bearings 254T Frame and Above;

Insulated Bearing on ODE Available on 444T and Above

❹ Class F Insula on System; Class B Rise at Full Load;

Class H Vacuum Pressure Impregna on (VPI) Resin for All Windings

❺ 40o C Ambient Con nuous Duty

❻ Stainless Steel Nameplate and Zinc Plate Hardware

❼ NEMA Design B Performance / High Star ng Torque

❽ Feet are Dual Drilled for Moun ng Flexibility

❾ Dual Voltage Ra ngs Suitable for Part Wind Start on Lower Voltage;

Single Voltage (460V) Ra ngs are Suitable for Part Wind Start

❿ Corrosion Resistant Epoxy Paint

⓫ F1 / F2 Reversible

⓬ Li ing Provision

⓭ Condensa on Drains with Plugs

⓮ Windings Rated for 2200V Peak Voltage Spikes

⓯ IP55 Protec on

⓰ Three (3) Year Warranty (Extended Warranty Available)

⓱ C‐Flange & D‐Flange Field Conversion Kits Available

General Purpose—Heavy Duty Cast Iron Three‐Phase, 143T—449T Frame Open Drip Proof (ODP) Inverter Duty (20:1 VT; 10:1 CT) NEMA MG‐1, PART 31, TABLE 12‐12


❷ 1.25 Service Factor @ 60 Hertz; 1.0 Service Factor @ 50 Hertz













⓫ F1 / F2 Reversible From 254T—365T and 444T—449T Frame

⓬ Li ing Provisions on 182T Frame and Above


⓯ IP23 Protec on


⓱ C‐Flange Field Conversion Kits Available


1 HP—300 HP

350 HP—600 HP

APPLICATIONS: General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in damp, dusty or dirty environments. Suitable for use with variable frequency drives.

20 HP—300 HP

APPLICATIONS: General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in environments with minimal dirt and moisture. Suitable for use with variable frequency drives.


OPEN DRIP PROOF (ODP) ROLLED STEEL 1 HP—20 HP CAST IRON 15 HP—300 HP

143T—449T FRAME

THREE‐PHASE ODP

1 HP—20 HP

5


1 HP—300 HP GENERAL PURPOSE C‐FLANGE W/ FEET

CAST IRON 143TC—449TC FRAME

THREE‐PHASE TEFC

General Purpose—Heavy Duty Cast Iron Three‐Phase, 143TC—449TC Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) NEMA MG‐1, PART 31, TABLE 12‐12 CLASS I, DIV II GROUPS ABCD, T2B CLASS II, DIV II GROUPS F & G



















⓯ IP55 Protec on


⓱ D‐Flange Field Conversion Kits Available



ROUND BODY/C‐FLANGE CAST IRON

143TC—286TC FRAME THREE‐PHASE

TEFC

General Purpose—Heavy Duty Cast Iron Three‐Phase, 143TC—449TC Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) NEMA MG‐1, PART 31, TABLE 12‐12 CLASS I, DIV II GROUPS ABCD, T2B CLASS II, DIV II GROUPS F & G



❸ Sealed Bearings Through 215TC Frame;

Regreasable Open Bearings 254TC Frame and Above






❽ Dual Voltage Ra ngs Suitable for Part Wind Start on Lower Voltage

❾ Corrosion Resistant Epoxy Paint

❿ F1 / F2 Reversible

⓫ Li ing Provision

⓬ Condensa on Drains with Plugs

⓭ Windings Rated for 2200V Peak Voltage Spikes

⓮ IP55 Protec on

⓯ Three (3) Year Warranty (Extended Warranty Available)


6



ALUMINUM

143T—215T FRAME THREE‐PHASE

TEFC

General Purpose—Aluminum Three Phase, 143T—215T Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) NEMA MG‐1, PART 31, TABLE 12‐12

APPLICATIONS: General purpose use for ca ish pond aera on, pumps, fans, blowers, compressors, conveyors, material handling and other industrial machinery installed in damp, dusty or dirty environments. Suitable for use with variable frequency drives.




❸ Sealed Bearings

❹ Class F Insula on System, Class B Rise at Full Load;





❽ Feet are Dual Drilled for Moun ng Flexibility;

Removable Bases

❾ Dual Voltage Ra ngs Suitable for Part Wind Start on Lower Voltage






⓯ IP55 Protec on

⓰ Two (2) Year Warranty (Extended Warranty Available)

⓱ C‐Flange Field Conversion Kits Available

1 HP—600 HP CRUSHER DUTY

DESIGN C CAST IRON

143T—586/7UZ FRAME

THREE‐PHASE TEFC

Crusher Duty—Heavy Duty Cast Iron Three‐Phase, 143T—586/7UZ Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) (1 HP—300 HP)

NEMA DESIGN C—HIGH TORQUE

CLASS I, DIV II GROUPS ABCD, T2B

Inverter Rated (10:1 VT; 5:1 CT) (250 HP—600 HP)

NEMA MG‐1, Part 31, Table 12‐12 (unless otherwise noted)

CLASS II, DIV II GROUPS F & G


❷ 1.15 Service Factor @ 60 Hertz; 1.0 Service Factor @ 50 Hertz;









❼ NEMA Design C Performance









⓯ IP55 Protec on


⓱ C‐Flange & D‐Flange Field Conversion Kits Available

APPLICATIONS: Special purpose use on crushing and pulverizing equipment and other industrial equipment requiring extremely high star ng torques and breakdown torques. Suitable for use with variable frequency drives.

1 HP—300 HP

350 HP—600 HP

7


General Purpose—Rolled Steel Single Phase, 56C/CH Frame Totally Enclosed Fan Cooled (TEFC)

Standard Features Include: ❶ 1/3 HP—2 HP in Stock

❷ 1.15 Service Factor @ 60 Hertz

❸ Sealed Bearings






❽ Removable Feet1

❿ Aluminum Endbells

⓫ Corrosion Resistant Epoxy Paint


⓭ IP55 Protec on

⓮ Two (2) Year Warranty

❾ Capacitor Start / Capacitor Run Design

1/3 HP—2 HP GENERAL PURPOSE C‐FLANGE W/ FEET

ROLLED STEEL

56C/CH FRAME SINGLE PHASE

TEFC

APPLICATIONS: General purpose use on pumps, fans, blowers, compressors, conveyors, farm equipment and other industrial and commercial machinery installed in damp, dusty or dirty environments.

General Purpose—Farm Duty Single Phase, 56C—215T Frame Totally Enclosed Fan Cooled (TEFC)


❷ 1.15 Service Factor @ 60 Hertz; 1.0 Service Factor for 10 HP Only

❸ Sealed Bearings





❼ High Star ng Torque


❾ Manual Overload Protec on (1/3 HP—5 HP)

❿ Capacitor Start / Capacitor Run Design


⓬ Li ing Provision on 182T and Above


⓮ IP55 Protec on

⓯ Two (2) Year Warranty

⓰ C‐Flange Field Conversion Kits Available

APPLICATIONS: General purpose use on pumps, fans, conveyors, poultry equipment, air compressors and other farm duty machinery requiring high star ng torque.

1/3 HP—10 HP FARM DUTY ROLLED STEEL

56C—215T FRAME

SINGLE PHASE TEFC

General Purpose—Compressor Duty Single Phase, 56H—184T Frame Open Drip Proof (ODP)



❸ Sealed Bearings







❿ Cast Iron Endbells


⓬ IP22 Protec on

⓭ Two (2) Year Warranty

❾ Capacitor Start / Capacitor Run Design

3 HP—5 HP COMPRESSOR DUTY

ROLLED STEEL

56H—184T FRAME SINGLE PHASE

ODP

APPLICATIONS: General purpose use on pumps, fans, conveyors, blowers, air compressors, refrigera on equipment, industrial equipment, milling machines, tools, farm equipment, aera on equipment and other general purpose applica ons where contaminants are minimal.

SINGLE PHASE

SINGLE PHASE

SINGLE PHASE

56C

143T

213T

182T

56H

8


General Purpose—Rolled Steel Three‐Phase, 56C/CH Frame Totally Enclosed Fan Cooled (TEFC) Inverter Rated (10:1 VT; 5:1 CT) NEMA MG‐1, PART 31, TABLE 12‐12



❸ Sealed Bearings






❽ Removable Feet

❾ Aluminum Endbells


⓫ Condensa on Drains with Plugs

⓬ IP55 Protec on

⓭ Three (3) Year Warranty (Extended Warranty Available)

APPLICATIONS: General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial and commercial machinery installed in damp, dusty or dirty environments. Suitable for use with variable frequency drives.

1/3 HP—3 HP GENERAL PURPOSE C‐FLANGE W/ FEET

ROLLED STEEL

56C/CH FRAME THREE‐PHASE

TEFC

General Purpose—Rolled Steel Three‐Phase, 143T—215T Frame Totally Enclosed Fan Cooled (TEFC) Inverter Rated (10:1 VT; 5:1 CT) NEMA MG‐1, PART 31, TABLE 12‐12



❸ Sealed Bearings








❿ Li ing Provision

⓫ Condensa on Drains with Plugs

⓬ IP55 Protec on

⓭ Three (3) Year Warranty (Extended Warranty Available)

⓮ C‐Flange Field Conversion Kits Available1


ROLLED STEEL


TEFC

APPLICATIONS: General purpose use on pumps, fans, blowers, compressors, conveyors, material handling and other industrial and commercial machinery installed in damp, dusty or dirty environments. Suitable for use with variable frequency drives.

THREE‐PHASE

THREE‐PHASE

9


Washdown Duty—Stainless Steel Three Phase, 56C—256TC Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) NEMA MG‐1 TABLE 12‐12

Standard Features Include:

❶ 1/3 HP—20 HP in Stock

❷ 1.15 Service Factor @ 50/60 Hertz

❸ Double Sealed Bearings in Both Ends



❺ Double Sealed Bearings in Both Ends

❻ 40o C Ambient Con nuous Duty


❽ Dual Voltage Ra ngs Suitable for Part Wind Start on Lower Voltage

❾ Condensa on Drains with Plugs

❿ Windings Rated for 2200V Peak Voltage Spikes

⓫ IP66 Protec on

⓬ Two (2) Year Warranty

1/3 HP—20 HP WASHDOWN DUTY

C‐FLANGE W/ FEET OR ROUND BODY STAINLESS STEEL

56C—256TC FRAME

THREE‐PHASE TEFC

APPLICATIONS: Specifically designed for food processing, pharmaceu cal and other environments requiring extreme cleanliness and frequent washdowns. Applica ons also include chemical processing, poultry processing, meat processing, dairy applica ons, bakeries, snack foods, bo ling and extremely corrosive environments. Suitable for use with variable frequency drives.

Close Coupled Pump—Heavy Duty Cast Iron Three Phase, 143JM/JP—365JM/JP Frame Totally Enclosed Fan Cooled (TEFC) Inverter Duty (20:1 VT; 10:1 CT) NEMA MG‐1 TABLE 12‐12 CLASS I, DIV II GROUPS ABCD, T2B and CLASS II, DIV II GROUPS FG

1 HP—75 HP CLOSE COUPLED

JM FRAME OR JP FRAME CAST IRON

143JM/JP—365JM/JP FRAME

THREE‐PHASE TEFC

APPLICATIONS: Specifically designed for use on industrial and commercial pumping units. Suitable for use with variable frequency drives.



❸ Sealed Bearings Through 215JM/JP Frame;

Regreasable Open Bearings 254JM/JP Frame and Above













⓯ IP55 Protec on


JM FRAME

JP FRAME

W/ FEET

ROUND BODY

10


Explosion Proof Three‐Phase, 143T/TC—449T/TC Frame Totally Enclosed Explosion Proof (TEXP) Inverter Rated (10:1 VT; 5:1 CT) NEMA MG‐1, TABLE 12‐12




Regreasable Open Bearings 254T Frame and Above



❺ Hazardous Loca on Classifica on:

See Quick Reference Table Below


❼ NEMA Design B Performance






⓭ Cast Iron Frame Construc on

⓮ IP55 Protec on


⓰ C‐Flange Conversion Kits Available

1 HP—250 HP EXPLOSION PROOF

CAST IRON

INVERTER RATED (10:1 VT; 5:1 CT) 143T/TC—449T/TC FRAME

THREE‐PHASE TEXP

Oil Well Pump Three‐Phase, 184T—449T FRAME TEFC or Open Drip Proof (ODP) Inverter Duty (20:1 VT; 10:1 CT) NEMA Design D—High Torque / High Slip (5—8%)

2 HP—150 HP OIL WELL PUMP

CAST IRON

INVERTER DUTY (20:1 VT; 10:1 CT) 184T—449T FRAME

THREE‐PHASE TEFC or ODP Standard Features Include:

❶ 2 HP—150 HP TEFC or 7.5 HP—100 HP ODP in Stock


❸ Double Shielded Bearings through 215T Frame on TEFC Only;

Regreasable Open Bearings for 254T Frame and Above;





❼ NEMA Design D Performance

❽ High Torque / High Slip (5—8%)

❾ Thermistors in the Windings

❿ Dual Voltage Ra ngs Suitable for Part Wind Start on 230V




⓮ Cast Iron Frame Construc on

⓯ Windings Rated for 2200V Peak Voltage Spikes

⓰ IP55 (TEFC) or IP23 (ODP) Protec on

⓱ Two (2) Year Warranty (Extended Warranty Available)

Mechanical Oil Seal on Both Ends 254T Frame and Above

APPLICATIONS: Designed specifically for use on Oil Well Pumping Units. Suitable for use with variable frequency drives.

TEFC

ODP

MAX AMB OPER. TEMPFRAME CLASS DIV GROUPS TEMP S. F. CODE

143T—215T I 1 C & D 55°C 1.15 T3C

254T—365T I 1 C & D 40°C 1.15 T3C II 2 F & G 40°C 1.15 T3C

404T—449T

I 1 C & D 40°C 1.15 T3C

II 2 F & G 40°C 1.15 T3C I 1 C & D 55°C 1.15 T2B

QUICK REFERENCE TABLE

C‐FLANGE

900 RPM & 1200 RPM IN STOCK!

11




❸ Oversized Angular Contact Bearing and Ball Bearing

High Thrust (10 HP—250 HP)

Extra High Thrust / Double Stacked Bearing also Available (100 HP—500 HP)






❽ Enclosure: WP1—Open Weather‐Protected Machine Type 1

❾ Non‐Reverse Ratchet (Ball Type)

❿ Dual Voltage Ra ngs Suitable for Part Wind Start at 230V;

Single Voltage Ra ngs are Suitable for Part Wind Start at 460V

⓫ Oil Bath with Large Reservoir (40 HP—500 HP)

⓬ Cast Iron / Plate Steel Frame Construc on

⓭ Light Weight Hood for Easy Access

⓮ Space Heaters

⓯ Resistance Temperature Detector (RTD) (300 HP—500 HP)

⓰ Thermal Protected

⓱ Corrosion Resistant Epoxy Paint

⓲ Li ing Provisions

⓳ Two (2) Year Warranty (Extended Warranty Available)

⓴ Parts and Accessories Available

APPLICATIONS: Designed primarily for deep well turbine pump applica ons. The coupling is equipped with a non‐reverse ratchet, which prevents motor rota on from backspin at shutdown. These motors are built to NEMA standards and have special bearing arrangements to carry heavy thrust loads. Suitable for use with variable frequency drives.

10 HP—500 HP VERTICAL HOLLOW SHAFT

INVERTER RATED (10:1 VT)

HIGH/EXTRA HIGH THRUST DESIGN 215TP—5008P FRAME

THREE‐PHASE V1 SERIES

WP1

COUPLING INCLUDED IN PRICE!

VHS—V1 Series Cast Iron/Plate Steel Three‐Phase, 215TP—5008P Frame Open Weather‐Protected Machine Type 1 (WP1) Inverter Rated (10:1 VT) High / Extra High Thrust

LIGHTWEIGHT HOOD OIL PLUG SIGHT GAUGE

12


10 HP—500 HP VERTICAL HOLLOW SHAFT

INVERTER DUTY (20:1 VT)

HIGH/EXTRA HIGH THRUST DESIGN 215TP—5008P FRAME

THREE‐PHASE V2 SERIES

WP1



❸ Oversized Angular Contact Bearing and Ball Bearing;

Insulated Bearing Mount (40 HP—500 HP)

High Thrust (10 HP—250 HP)

Extra High Thrust / Double Stacked Bearing also Available (100 HP—500 HP)






❽ Enclosure: WP1—Open Weather‐Protected Machine Type 1

❾ Non‐Reverse Ratchet (Ball Type)

❿ Dual Voltage Ra ngs Suitable for Part Wind Start at 230V;

Single Voltage Ra ngs are Suitable for Part Wind Start at 460V

⓫ Oil Bath with Large Reservoir (40 HP—500 HP)

⓬ Cast Iron / Plate Steel Frame Construc on

⓭ Light Weight Hood for Easy Access

⓮ Space Heaters

⓯ Resistance Temperature Detector (RTD) (300 HP—500 HP)

⓰ Thermal Protected

⓱ Windings Rated for 2200V Peak Voltage Spikes

⓲ Corrosion Resistant Epoxy Paint

⓳ Li ing Provisions ⓴ Two (2) Year Warranty (Extended Warranty Available) — Parts and Accessories Available

COUPLING INCLUDED IN PRICE!

VHS—V2 Series Cast Iron/Plate Steel Three‐Phase, 215TP—5008P Frame Open Weather‐Protected Machine Type 1 (WP1) Inverter Duty (20:1 VT) High / Extra High Thrust

LIGHTWEIGHT HOOD OIL PLUG SIGHT GAUGE

APPLICATIONS: Designed primarily for deep well turbine pump applica ons. The coupling is equipped with a non‐reverse ratchet, which prevents motor rota on from backspin at shutdown. These motors are built to NEMA standards and have special bearing arrangements to carry heavy thrust loads. Recommended for use with variable frequency drives.

13


Rotary Phase Converter Three‐Phase, 182T—364T Frame Totally Enclosed Fan Cooled (TEFC) Spike Resistant Wire




Regreasable Open Bearings 254T Frame and Above

❹ Class F Insula on System; Class B Rise at Full Load




❼ Feet are Dual Drilled for Moun ng Flexibility

❽ Spike Resistant Inverter Duty Wire


❿ F1 / F2 Reversible

⓫ Li ing Provisions on 143 Frame and Above


⓭ Windings Rated for 2200V Peak Voltage Spikes

⓮ IP55 Protec on


APPLICATIONS:

Specifically designed without sha s for use with rotary phase converters to run three phase equipment from single phase power. This is a rotary phase converter unit. This is NOT a complete phase converter system. IP55 Protec on as standard for indoor and outdoor applica ons.

3 HP—60 HP ROTARY PHASE CONVERTER

CAST IRON


TEFC

2—10 BOX SIZE SHAFT MOUNT REDUCER

15:1 or 25:1 RATIO

Sha Mount Gear Reducer Direct "Drop In" for Dodge® ‐ TXT style

Standard Features Include: ❶ 2—10 Box Size in Stock

❷ 15:1 or 25:1 Ra o

❸ High Quality Bearings

❹ Double Lip Seals

❺ Case Hardened Steel Sha s & Gears

❼ Meets or Exceeds AGMA 9 Standards

❽ Computerized Design & Construc on

❾ Screw Conveyor Adaptable

❿ Torque Arm Included

⓬ Corrosion Resistant Epoxy Paint ⓫ CEMA Adapter Bolt Holes

⓭ Two (2) Year Warranty

❻ Tapered Bore

14


MOTOR WARRANTY POLICY & PROCEDURES NO‐FAULT WARRANTY POLICY

Motors with frame sizes 215T and smaller are covered under our “No‐Fault Warranty”. The warranty period is 24 months from the date of invoice. This special limited warranty is offered one me per end‐user, per applica on. If there is more than one failure, please follow our standard limited warranty policy and procedure and contact our warranty department for assistance. For informa on regarding this warranty policy you may contact our customer service department at (800)884‐0404 or visit our website at www.naemotors.com. North American Electric’s liability under this warranty or any other warranty, expressed or implied, in law or fact, shall be limited to the replacement of the motor, and in no event shall North American Electric, Inc. be liable for consequen al or indirect damages, including freight. When filing a claim under our “No Fault Warranty”, you must provide the following documenta on to ensure your claim is processed in a mely manner.

Original nameplate from the failed motor Copy of the original North American Electric, Inc. invoice or the invoice number for the failed motor A brief descrip on of the failure for quality control purposes

Note: Please make a legible photo copy of the nameplate from the failed motor for your records.

STANDARD LIMITED WARRANTY POLICY

General Purpose Cast Iron Motors (TEFC & ODP)……………………………… 36 months from date of invoice General Purpose, Aluminum Motors………………………………………………… 36 months from date of invoice Rolled Steel Motors, Single Phase………………………………………………………. 24 months from date of invoice Rolled Steel Motors, Three‐Phase……………………………………………………. 36 months from date of invoice Crusher Duty Motors……………………………………………………………………….. 36 months from date of invoice Stainless Steel Motors………………………………………………………………………… 24 months from date of invoice Close Coupled Pump Motors……………………………………………………………. 36 months from date of invoice Explosion Proof Motors……………………………………………………………………… 24 months from date of invoice Oil Well Pump Motors……………………………………………………………………… 36 months from date of invoice Ver cal Hollow Sha Motors………………………………………………………………24 months from date of invoice Rotary Phase Converters……………………………………………………………………… 24 months from date of invoice Sha Mount Reducers………………………………………………………………………… 24 months from date of invoice Motor Slide Bases………………………………………………………………………………. 36 months from date of invoice

North American Electric, Inc. shall, at its op on and expense, either repair or replace any such motor or part, which is defec ve within the warranty period. To be covered under warranty, any motor must have at all mes been operated or used under normal opera ng condi ons for which the motor was designed. In the event of warranty claims, North American Electric, Inc. must be no fied promptly following any motor failure. The motor should be sent to a North American Electric, Inc. authorized service center to diagnose cause of failure. A er this examina on, a determina on will be made if the failure was due to defec ve material and/or workmanship. If the failure was due to defec ve material and/or workmanship, North American Electric, Inc. will replace or repair the motor. DO NOT repair any motor without a prior wri en purchase order from North American Electric, Inc. North American Electric’s liability under this warranty or any other warranty, expressed or implied, in law or fact, shall be limited to the replacement of the motor, and in no event shall North American Electric, Inc. be liable for consequen al or indirect damages, including freight. When filing a claim under our standard Limited Warranty Policy, please be prepared to provide the following:

1) Serial Number 2) Model Number 3) EASA Report 4) Photographs showing the cause of failure 5) Es mated cost of repair 6) Nameplate (photo of nameplate for stainless steel/washdown duty motors) if motor is to be replaced.

For more informa on about warranty policies and procedures please contact our customer service department at (800) 884‐0404, visit our website at www.naemotors.com or send us an email at [email protected].


CONTINUING EDUCATION

CONTINUING EDUCATION

North American Electric’s con nuing educa on courses were created with you in mind to provide informa on, tools, technical support, and training to sell, install, and support low voltage AC drives.

NAE University offers professional, comprehensive, and educa onal programs including: Sales/Product Training

Electric Motors Electric Motor Controls

Motor Start Up / Basic Programming of Low Voltage AC Drives

Maintenance and Troubleshoo ng Training

Electric Motors Electric Motor Controls

We provide in depth, hands on training at our headquarters in Hernando, Mississippi. We also provide on‐site training at your loca on as well as internet courses and webinars.

For more informa on, please visit our website at www.naemotors.com, or contact us at 800‐884‐0404.

800.884.0404 [email protected]

naemotors.com P.O. Box 130 ● 350 Vaiden Drive

Hernando, MS 38632

General Purpose Motors & More

508A Cer fied

motors made easy · electric motors brochure—2019 v.3 1 hp—600 hp general purpose cast iron...

Documents