motors & motor controllers - contents - công ty tnhh … components/rs...motors & motor...

Motors & Motor Controllers ON-LINEwww.rssingapore.com

60

OM = Order Multiple

For our range of Telemecanique BSH series servo motors

and Lexium 05 motion control products visit RS online

1436

AC Motors and Gearheads 1436

AC Geared Motors 1437

AC Soft Starts 1438

AC Inverter Drives 1439

Electronic Motor Protection 1442

Brake Modules 1443

DC Ironless Motors 1443

Brushed DC Motors 1445

Brushless DC Motors 1446

56 Counters, Timers & HourMeters 1333

57 Fluid Management & Control 1372

58 Industrial Circuit Protection 1400

59 Machine Guarding 1414

Automation & Control GearMotors & Motor Controllers - contents

55 Control Gear & Switchgear 1269

61 Panel Meters 1457

62 PLCs, Industrial Networking& Data Acquisition 1479

63 Signal Conditioning & RelayControllers 1489

64 Sensors & Transducers -Factory Automation 1511

65 Sensors & Transducers -Process Automation 1553

66 Sounders & Beacons 1580

67 Temperature Control &Process Heating 1611

Brushless DC Motors withIntegrated Electronics

1447

DC Ironless Geared Motors 1447

Brushed DC Geared Motors 1447

DC Motor Control 1450

Stepper Motors 1453

Stepper Drives 1454

Linear Actuators 1455

Gearheads 1455

Stepper Drive Controllers 1455

1434

www.nguyenxuong.com

Variable Speed DrivesAltivar series 12 and 312 – controllers for 3-phase asynchronous motors

CLI

PC

OM

23

820

High performance

User-friendly

Compact

Economical

Altivar 12:

> Single phase in, 3-phase out, 0.18kW to 2.2kW

> Supply voltage (200V -15% to 240V +10%)

> Quick start, no adjustment option for fast installation

> Low leakage current, suitable for supply via standard RCDs

> High ambient temperature tolerance (up to 60°C)

> Built-in RFI filter, excellent for domestic applications

Altivar 312:

> Single phase in, 3-phase out, 0.18kW to 2.2kW Supply voltage (200V -15% to 240V +10%)

> 3-phase in, 3-phase out, 0.37kW to 15kW Supply voltage (380V -15% to 500V +10%)

> Enhanced communication capabilities

> Conformal coated for resistance to harsh environments

> Intuitive navigation and simplified user interfacing

www.nguyenxuong.com

AC Synchronous Motors

AC Shaded Pole Motors

AC Three Phase Induction Motors


60

OM = Order Multiple a New product to range * manufacturers information unavailable at time of printing

Shaded Pole Motor, Type 100

Shaded Pole Motor Geared Unit, FBT3Series

These synchronous motors are for direct driving from an a.c. supply. Ideally suited for time driving in

instrumentation, machine and process control. The smaller units can be directly connected to the

synchronous gearboxes (typical stock no. 332-868 etc).

Single Voltage, Reversible

Dual Voltage, Reversible

FIBER Synchronous Motors & Gearboxes

Shaded Pole Motor

Philips Components

Mellor Electric

Mellor Electric

Mellor Electric

Type Three Phase Voltage 415 V ac

Shaded pole ac motor gear unit

Suitable for many applications requiring a low speed, high torque and

quiet running unit

Typical applications include catering equipment, vending machines,

feed screw and transport mechanisms

Motor is rated for continuous operation with Class B insulation and a

thermal cut-out protection

A 240 Vac 50/60 Hz shaded pole motor with starting characteristics ideal

for small loads such as air and liquid movement

The 6Ø x 25mm long stainless steel shaft extension is threaded M4 for

the first 5 mm as well as having a 1 mm deep flat for 19 mm

The two pole windings are varnish impregnated to class F insulation,

impedance protected. Non-reversing, self-starting, r.f. and t.v.

interference-free. Sintered bronze bearings

Two versions are offered: clockwise (cw) and anti-clockwise (acw)

rotation as viewed from extension shaft. Complete with 300 mm supply

leads including earth. Both versions are UL 94-V0 rated and are self

extinguishing within 10-15 seconds

Consisting of two separate phases wound on 12 pole pairs,

which when connected in either series or parallel will allow the

motor to be run from 240Vac or 110Vac respectively. The

motor is provided with two phasing capacitors which,

depending on connections, will either forward or reverse the

motor direction

Supply voltage tolerance ±10%. Input power at 240 V, 1.7 W,

110 V, 0.8 W. Working torque at 240 V, 7 mNm, 110 V, 4 mNm

Power

Rating

(kW)

Output

Speed

(rpm)

Output

Torque

(Nm)

Stock no. Price

per

OM S$ S$ S$

0.37 2800 1.26 733-2067a unit 1+ 398·00

0.55 2790 1.88 733-2060a unit 1+ 423·00

0.18 1380 1.25 733-2098a unit 1+ 363·00

0.37 1355 2.6 733-2102a unit 1+ 401·00

0.75 1415 5.1 733-2109a unit 1+ 691·00 Speed of Synchronous motor = 60 x f (in Hz)/P,Where P =

pairs of poles

Supply Voltage 220/260 V Height 73.25 mmPower Rating (W) 19 Width 61.11 mmNo Load Speed 2750 rpm Depth 46.53 mmOutput Speed 2000 rpm Shaft Diameter 6 mmTorque Starting 0.75 N cm Shaft Length 25 mmTorque Running 1.06 N cm

Ideally suited for time driving in instrumentation, machine

and process control

Chosen for the differing torque capabilities ranging from

12mNm up to 106mNm. Suitable for higher torque

application than the dual voltage version

Designed for operation from a 220-240Vac. supply, but

synchronous speed will be maintained to a much lower

voltage, with a loss of working torque

Direction Of Rotation Reversible Diameter (mm) 35 Supply Voltage 110 ; 240 V Length (mm) 21 Output Speed 250/300 rpm Shaft Diameter 2 mmTorque Running 0.7@240V; 0.4@110V Shaft Length 7.6 mm

2 & 4 Pole IE2 Foot mounted Motors

Supply Voltage 230 VTorque Running 2500 N cm

Motor Features

Manu. Part No. Stock no. Price per OM S$ S$ S$

9904 111 32311 332-802 unit 1+ 125·00

Three phase motors ideal for a wide variety of

applications including pumps, fans and process

machinery drives.

Description Stock no. Price per OM S$ S$ S$

Clockwise Rotation 248-7112 unit 1+ 42·10

Anti-clockwise Rotation 248-7128 unit 1+ 40·00

Stock no. 440-385 is suitable for use with gearbox stock no. 332-868.

Power Rating

(W)

Output Speed

(rpm)

Shaft Diameter

(mm)

Shaft

Length

Stock no.

24 2 12 20.5 mm 454-8326

59 3.5 * * 454-8332

Fixed 500rpm output speed

Compact dimensions

2-wire model does not need a capacitor

Long life; 20 million starts, 3 years continuous operation

Optional gearboxes for increased torque at reduced

operating speed

Pre-fitted pinion and clip supplied for simple gearbox

mounting

Direction Of Rotation Reversible Output Speed 250 rpmSupply Voltage 220/240 V

High efficiency motors to meet IE2 regulations

Comparable to old EFF! regulations

Metric frame sizes to Cenelec standards

Class F insulation with class B temperature rise

Top mounted terminal box with metric/Pg type knockouts

Energy efficient low noise design

All motors have keyways and fitted keys

Corrosion resistant, low copper aluminium alloy

Suitable for DOL starting or inverter drive use Power Rating (W) Stock no. Price per OM S$ S$ S$

24 454-8326 unit 1+ 194·00

59 454-8332 unit 1+ 194·00

A higher power shaded pole motor available with or

without a gearbox, suitable for many applications

requiring a low cost unit, which is quiet running and has

compact dimensions. Typical applications include test

equipment, industrial process equipment. Class F

insulation and a thermal cut-out protection. Motor without

gearbox has a dual output shaft

Gearbox Features

Note: This motor is not rated for continuous operation.

Description Manu. Part No. Torque

Running

(N cm)

Torque

Stalled (N

cm)

Dia.

(mm)

Length

(mm)

Shaft

Diameter

(mm)

Shaft

Length

(mm)

Stock no.

Series CapacitorConnection. 2.7W

82 510 001 1.2 1.5 34 22 2 14.8 440-385

Parallel Cap.Connection, 3.5W

82 520 001 3.75 4.2 52 26 2 7.4 440-391


82 530 001 5.5 5.8 58 36 2 14.4 440-408


82 540 001 10.6 11.8 65 43 6 13 440-414

Maximum on time 20 minutes. Minimum off time 40 minutes.


82 510 001 440-385 unit 1+ 63·50

82 520 001 440-391 unit 1+ 72·00

82 530 001 440-408 unit 1+ 90·50

82 540 001 440-414 unit 1+ 128·00

Choice of gearbox ratings up to 55 Ncm

Supply Voltage 230 V Torque Running 1.68 N cmPower Rating (W) 24 Width 62 mmNo Load Speed 3000 rpm Shaft Diameter 6 mmTorque Starting 1.36 N cm Shaft Length 25.4 mm

Description Output Speed (rpm) Height (mm) Depth (mm) Stock no.

Motor Only, Clockwise or Counter Clockwise 2000 73 50 248-3637

Motor and Gearbox Clockwise Only 10 92 77 248-3643



Description Output Speed

(rpm)

Stock no. Price

per

OM S$ S$

Motor Only, Clockwise or CounterClockwise

2000 248-3637 unit 1+ 39·90

Motor and Gearbox Clockwise Only 10 248-3643 unit 1+ 162·50



1436

www.nguyenxuong.com

AC Single Phase and Worm Gearbox

AC Three Phase and Worm Gearbox

AC Synchronous Geared Motor

Motors & Motor ControllersORDERLINE65 6865 3433

60

Visit our website for additional price information and exciting promotions

SD8 Motor & S Model GearboxCombinations

SD18 Motor & M ModelGearbox Combinations

Synchronous Geared AC Motor Series82 334 5

Reversible Synchronous AC GearedMotor Series 80 547

Reversible Synchronous AC GearedMotor Series 82 524

Phasing Capacitors for CrouzetSynchronous Motors

UDS1 AC UnidirectionalSynchronous Motor

Phasing Capacitor Selection guide

Phasing Capacitor:

Manufacturer Part No Stock No. Manufacturer Part No Stock No.

26 231 908 204-4939 26 231 941 204-4945

Suitable Motors:

Manufacturer Part No Stock No. Manufacturer Part No Stock No.

80 547 020 204-4737 82 524 016 204-4800

80 547 019 204-4743 82 524 013 204-4816

80 547 018 204-4759 82 524 008 204-4850

80 547 017 204-4771 82 524 005 204-4872

80 547 015 204-4793 82 524 004 204-4888


Capacitor for 80 547 Series 204-4939 unit 1+ 7·90

Capacitor for 82 524 Series 204-4945 unit 1+ 18·60

Note: These motors should be used with phasing capacitor

(stock no. 204-4939).

Direction Of Rotation CW Width 65.7 mmSupply Voltage 230 V Depth 55.5 mmPower Rating (W) 0.42 Shaft Diameter 4 mmHeight 41.65 mm Shaft Length 10 mm

Single phase capacitor ac start and run motors, and single

reduction worm gearbox combinations

Two wire synchronous motor designed for continuous use at a

constant speed (500 rpm. at 50Hz)

Clockwise rotation viewed from shaft end

Long life (at least 3 years in continuous use)

Robust permanent magnet "tin-can" construction

Long life self-lubricating sintered bronze bearing

Fitted with a pinion to suit a range of UGD Saia-Burgess gearboxes

Can be stalled with voltage applied without overheating

Typical applications: Time-synchronised drive for clocks, cam

programmers, paper feeds, actuators, valves, flaps, various moving

advertising signs, time-relays For phasing capacitor see stock no. 204-4945

Three phase ac motors and single reduction worm gearbox

combinations

Note: These motors should be used with phasing capacitor.

Direction Of Rotation CW or CCW Width 65 mmSupply Voltage 240 V Depth 65 mmPower Rating (W) 2.65 Shaft Diameter 8 mmHeight 76.6 mm Shaft Length 15 mm

All motors in this range are 240Vac

For Saia-Burgess gearboxes, see stock no. 455-2555

220/380/440Vac

Manu. Part

No.

Output Speed

(rpm)

Maximum Output Torque (N

m)

Stock no.

82334738 20 0.2 181-2416

82 334 768 5 0.5 181-2359

82 334 767 6 0.5 181-2365

82 334 739 15 0.25 181-2400

Motor Type SD8 Length 219 mmGearbox Type S Shaft Diameter 9 mmPower Rating 35 W Shaft Length 29 mmCurrent Rating 0.3 A Output Speed 56 rpmHeight 107 mm Output Torque 2.94 NmWidth 111 mm

Direction Of Rotation CW or CCW Width 65.9 mmSupply Voltage 240 V Depth 56 mmPower Rating (W) 0.98 Shaft Diameter 4 mmMaximum Output Torque 0.5 N m Shaft Length 10 mmHeight 45.5 mm

Supplied with: Mounting clip.


82334738 181-2416 unit 1+ 74·00

82 334 768 181-2359 unit 1+ 74·00

82 334 767 181-2365 unit 1+ 74·00

82 334 739 181-2400 unit 1+ 74·00

Motor Type SD18 Length 233 mmGearbox Type M Shaft Diameter 12 mmPower Rating 190 W Shaft Length 62 mmCurrent Rating 0.5 A Output Speed 270 rpmHeight 139 mm Output Torque 4.52 NmWidth 157.75 mm

Manu.

Part No.

Output Speed

(rpm)

Maximum Output

Torque (N m)

Stock no.

80 547 020 1 5 204-4737

80 547 017 4 3 204-4771

80 547 015 10 1.8 204-4793


80 547 020 204-4737 unit 1+ 215·00

80 547 017 204-4771 unit 1+ 230·00

80 547 015 204-4793 unit 1+ 182·50

Manu. Part

No.

Output Speed

(rpm)

Stock no. Price

per

OM S$ S$ S$

82 524 016 1 204-4800 unit 1+ 89·50

82 524 008 5 204-4850 unit 1+ 89·50

82 524 005 8.33 204-4872 unit 1+ 89·50

82 524 004 10 204-4888 unit 1+ 89·50

Direction Of Rotation Clockwise (From Shaft End) Diameter (mm) 48.4 Supply Voltage 230 V Length (mm) 18.6 Power Rating (W) 0.5 Shaft Diameter 1.5 mmNormal Running Speed 500; 600 rpm Shaft Length 4.3 mmMaximum Output Torque 0.5 @ 500rpm; 0.4 @ 600rpm N m

Stock no. Price per OM S$ S$ S$

717-376 unit 1+ 375·00


718-010 unit 1+ 560·00


53465 455-2527 unit 1+ 27·20

Long life up to 10,000 hours at full rating

Applications include control valve actuation, timers, peristaltic pumps, CCTV ancillary drives

Supply voltage 230 Vac + 10% 50-60 Hz Operating torque 55 Ncm Power consumption 4 VA Duty cycle 100% Insulation voltage 2.5KV @ 50Hz between coil and stator Operating temperature range -10°C to +55°C Protection class IP50 Direction of rotation Uni-directional Operating speed 500 rpm @ 50Hz Mass 100g

Output characteristics using motor 494-1208 or 494-1214

Maximum continuous torque for 1,000 houroperation

18 N cm @ 60 rpm output speed to 80 N cm @ 0.5 rpmoutput speed

Mass 34g

Gear material Self lubricating acetal resin throughout for low noiseoperation

Operating temperature range -10°C to + 55°C

Direction of rotation compared to input Same

Technical specification - Gearboxes

Ratio Speed (RPM) Torque (N cm) Stock no.

500:1 1 55 494-1220

250:1 2 40 494-1236

25:1 20 9.6 494-1258

50:3 (16.7:1) 30 6.0 494-1264


Motor - Clockwise 494-1208 unit 1+ 29·70

Motor - Anti-clockwise 494-1214 unit 1+ 26·80

Accessories


Gear head, 500:1 494-1220 unit 1+ 23·70

Gear head, 250:1 494-1236 unit 1+ 22·00

Gear head, 25:1 494-1258 unit 1+ 18·40

Gear head, 50:3 494-1264 unit 1+ 18·40

1437

www.nguyenxuong.com

Schneider Electric

ABB ACS Range

ABB

Siemens


60

OM = Order Multiple a New product to range

Altistart Soft Start

Altistart Soft Start with Soft Stop -400V

Improves motor speed control

Helps to eliminate starting and stopping problems

May be networked with other automation equipment

Load compensation features

Single or three-phase supply inputs

ACS 55 Single Phase Input

PSR Soft Starter

Sirius 3RW30

An easy to use range of drives designed specifically for the control of low power

motors which do not require the control sophistication of more complex drive

units. Easy to set-up, programme and control the motor speed when using the

optional potentiometer unit (stock no 493-1059).May be used with single or three phase motors

May be integrated into a motor control system using

other Sirius control gear products, e.g. 3 pole circuit

breakers from the 3RV10 range (see Control Gear

Three phase input

Controlled deceleration

No programming required, easy and descriptive interface used to set up the

motor control

All drive set-up is done using the 3 panel potentiometers for motor nominal

current

8 DIP switches for other parameters including nominal motor frequency, load

torque type e.g. pump/fan or constant torque, jog, AI offset and autorest

Fault and status indication LEDs

Adjustable switching frequency

Built-in EMC filter

Voltage 230 → 440Vac

This range covers motor currents from

3 to 45A. With their compact design,

the PSR Soft Starters are ideal for

installations in places where space is

limited and where there is a demand

for easy installation. All sizes include a

run signal relay, while sizes from 25A

are also provided with an output signal

for TOR (Top of Ramp), i.e. Full

Voltage. With standard performance

the PSR Soft Starters handle 10 starts

per hour. When an auxiliary fan is

added, the starting capacity is

Removable mounting clip for DIN rail or wall mounting from rear or side of the drive. Wall

mounting backplate 170mm height, 215mm for 1.5 & 2.2 kW models

Protection rating IP20

section)

Two phase control

Adjustable start-up voltage between 40 to 100% of working voltage

Integrated bypass contacts

DIN rail mounting

Compact design and dimensions

Status indication

Integrated ’self-hold’ and ’end of start-up’ auxiliary contacts. The self-hold

contact is used for interlocking when controlled by a means of a simple

’on-off’ pushbutton set up. The ’end of start up’ signal may be used to

operate other pieces of plant, such as a pump

Ideal replacement for DOL and Star-Delta starters

Note: Power ratings stated are for 3 phase 400V motors.

These units may also be used with lower voltage 3 phase

motors and single phase motors. Please refer to technical

data sheet for further information.

Note: Power ratings stated are for 3 phase 400V motors.

Output Frequency 0→120 Hz Three Phase Over-current Protection Yes Accel/Decel Settings 1 IR Compensation Yes Preset Speeds 2 Stopping Ramp Yes

Supply Voltage 110 → 480 V

increased to 20 starts per hour.

Please refer to technical data sheet for further information.

Power Rating (kW) Stock no. Price per OM S$ S$ S$

11 → 22 710-6388a unit 1+ 1595·00

15 → 30 710-6394a unit 1+ 1783·00

18.5 → 37 710-6405a unit 1+ 1950·00

22 → 45 710-6411a unit 1+ 2127·00

30 → 55 710-6427a unit 1+ 2436·00

75 → 132 710-6455a unit 1+ 4785·00

Note: End of stand-up auxiliary contacts not available on 3 and 4kW units.

Current Rating (A) Power Rating (kW) Dimensions (H x W x D) (mm) Stock no.

3 1.1 100 x 22.5 x 100 505-5803

6 2.2 100 x 22.5 x 100.4 478-4702

9 4 124 x 45 x 113 505-5819

12 5.5 124 x 45 x 131 478-4718

Altistart ATS 22

Operating Voltage 200 to 460Vac (50-60Hz) Ramp Up/Soft Start Time 0 - 20s (adjustable) Control Voltage 110 to 230Vac (50-60Hz) Ramp Down/Soft Stop Time 0 - 20s (adjustable) FLC Operating (Max.) 40°C

Control Voltage 100 to 240 V acSupply Voltage 208 to 600 V ac

Supply Voltage 380 → 415 V

Current Rating

(A)

Power Rating

(kW)

Dimensions (H x W x D)

(mm)

Stock no.

9 4 145 x 45 x 131 505-5825

12 5.5 124 x 45 x 131 478-4780

22 11 154 x 45 x 131 478-4730

32 15 175 x 45 x 131 505-5847

Manu. Part No. Current Rating (A) Power Rating (kW) Dimensions (H x W x D) (mm) Stock no.

PSR12-600-70 12 5.5 140x45x113.5 325-479

PSR16-600-70 18 7.5 140x45x113.5 325-485

PSR25-600-70 25 11 160x45x128 325-508

PSR37-600-70 37 18.5 187x54x153 656-6562

Manu. Part No. Current Rating (A) Power Rating (kW) Dimensions (H x W x D) (mm) Stock no.

3RW30141CB14 6 1.5 → 3 97.5 x 45 x 100 351-5117

3RW30161CB14 9 2.2 → 4 97.5 x 45 x 100 351-5123

3RW30241AB14 12.5 3 → 5.5 125 x 45 x 124 351-5139

3RW30251AB14 16 4 → 7.5 125 x 45 x 124 351-5145

3RW30261AB14 25 5.5 → 11 125 x 45 x 124 351-5151

3RW30341AB14 32 7.5 → 15 160 x 55 x 148 351-5173

3RW30361AB14 45 15 → 22 160 x 55 x 148 539-0140

3RW30441AB14 63 18.5 → 30 170 x 70 x 183 539-0156

Manu. Part No. Power

Rating (kW)

Stock no. Price

per

OM S$ S$ S$

ATS01N103FT 1.1 505-5803 unit 1+ 205·00

ATS01N106FT 2.2 478-4702a unit 1+ 207·00

ATS01N109FT 4 505-5819 unit 1+ 243·00

ATS01N112FT 5.5 478-4718 unit 1+ 261·00

Power Rating

(kW)

Current Rating

(A)

Stock no. Price

per

OM S$ S$ S$

5.5 12 325-479 unit 1+ 320·00

7.5 18 325-485 unit 1+ 365·00

11 25 325-508 unit 1+ 415·00

18.5 37 656-6562 unit 1+ 630·00


Rating (kW)

Stock no. Price

per

OM S$ S$ S$

ATS01N209QN 4 505-5825a unit 1+ 323·00

ATS01N212QN 5.5 478-4780 unit 1+ 341·00

ATS01N222QN 11 478-4730 unit 1+ 394·00

ATS01N232QN 15 505-5847 unit 1+ 527·00


3RW30141CB14 351-5117 unit 1+ 335·00

3RW30161CB14 351-5123 unit 1+ 332·60

3RW30241AB14 351-5139 unit 1+ 361·10

3RW30251AB14 351-5145 unit 1+ 418·20

3RW30261AB14 351-5151 unit 1+ 470·40

3RW30341AB14 351-5173 unit 1+ 555·90

3RW30361AB14 539-0140a unit 1+ 964·40

3RW30441AB14 539-0156a unit 1+ 985·00

The ATS22 is a simple to use, three phase digital softstart with embedded bypass function for a wide

range of applications.,Complete with adjustable electronic overload and fieldbus communications.

Compact size

Simple connection

Easy to commission

Built-in bypass

3 programmable logic inputs

1 PTC input

2 relay outputs

Motor thermal protection

Overvoltage protection

1438

www.nguyenxuong.com

Parker SSD 600 Range


60

New products available online every week

ACS 55 Speed Control Potentiometer

ACS 350 Speed Control Potentiometer

ACS 350 & 550 Basic Control Panel

ACS 350 & 550 Assistant Control Panel

Space and cost-saving internal filters meeting European EMC emission standard EN50081-1

Combined inverter and filter reduces the possibility of radiated emission through the aerial effect of

interconnecting wires

Superior high torque/low speed sensorless vector control

Programming/control module offers local control of stop/start, forward/reverse and jog

Multilingual 32 character display for programming module

Extremely simple programming, all diagnostics and set-up parameters displayed in plain language

ACS 150 Three Phase Input

ACS 150 Single Phase Input

Type Inverter Drive No. Phases 3Series ACS 310 IP Rating IP 20 Voltage 380 → 480 Vac

The basic control panel features a single line numeric display. The panel

can be used to control the drive, set the parameter values or copy them

from one drive to another.

No complex programming, achieved by different levels of parameter viewing

Easy configuration via the built in keypad

Control via I/O or an optional potentiometer and switch panel, which connects to

the I/O rail

Protects motor output and I/O mis-wiring, the drive reports a fault if power is

connected to the motor terminals

Coated boards included as standard, protect against moisture and hostile

particles

On board potentiometer for simple speed control

Small compact size with integral EMC filter

Multiple mounting configurations: wall or DIN rail, back or side, IP20 rated

Unified height and depth makes cabinet design easy

Can be programmed in the box with FlashDrop tool (stock no. 621-1329),

The assistant control panel features various assistants and a built in help

function to guide the user. It includes a real time clock, which can be used

as start/ stop. The control panel can be used for copying parameters for

back up or downloading to another drive. A large graphical display and

softkeys make it extremely easy to navigate.

Potentiometer used to give fast end easy local control to the drive,

simply connects to the drive I/O rail.

Easy to install potentiometer for local speed control

Power Rating

(kW)

Current Rating

(A)

Stock no. Price

per

OM S$ S$ S$

2.2 6.2 705-4782a unit 1+ 867·00

4 9.7 705-4795a unit 1+ 1263·00

5.5 13.8 705-4798a unit 1+ 1467·00

7.5 17.2 705-4792a unit 1+ 1935·00

11 25.4 705-4802a unit 1+ 2361·00

15 34.1 705-4805a unit 1+ 3033·00

22 48.4 705-4818a unit 1+ 4323·00

Alphanumeric and graphical backlit display

Intuitive “mobile phone like” use

Allows parameters to be displayed and set

Start-up, maintenance and diagnostic assistants

Control of the drive with start, stop, forward and reverse keys

2 ’soft keys’

Help button that gives information from the manual

Gives suggestions to resolve a trip if one occurs

Upload and download capabilities to copy between drives

Real time clock and calendar

Control of the drive with start, stop, forward and reverse keys

ACS 310 Standard Three Phase Drives


ACS50-POT 493-1059 unit 1+ 54·50

allowing fast and easy drive set up and commissioning for volume manufacturing


MPOT-01 621-1492 unit 1+ 63·50

Input/Output Voltage 200 to 240 V acHeight (mm) 169 Depth 142 mm


ACS-CP-C 511-0455 unit 1+ 86·00

No complex programming, achieved by different levels of

parameter viewing

Easy configuration via the built in keypad

Control via I/O or an optional potentiometer and switch

panel, which connects to the I/O rail

Protects motor output and I/O mis-wiring, the drive reports

Fault logger with time and date stamping of 7 signals

Changed parameters list

I/O connection list

14 languages supported at the same time

A basic drive range designed with a powerful set of

features which benefit pump and fan applications

including built-in PID controllers and PFC (pump and

fan control) that varies the drive’s performance in

response to changes in pressure, flow or other external

data.

S-Ramp Yes Short circuit Protection Yes Overload Protection Yes

Manu. Part No. Power Rating (kW) Current Rating (A) Width (mm) Stock no.

ACS150-01E-02A4-2 0.37 2.4 70 621-1199

ACS150-01E-04A7-2 0.75 4.7 70 621-1206

ACS150-01E-07A5-2 1.5 7.5 105 621-1212

ACS150-01E-09A8-2 2.2 9.8 105 621-1234


ACS-CP-A 511-0449 unit 1+ 300·00

a fault if power is connected to the motor terminals

Coated boards included as standard, protect against moisture and hostile

particles

On board potentiometer for simple speed control

Small compact size with integral EMC filter

Multiple mounting configurations: wall or DIN rail, back or side, IP20 rated

Unified height and depth makes cabinet design easy

Can be programmed in the box with FlashDrop tool (stock no. 621-1329),

allowing fast and easy drive set up and commissioning for volume

manufacturing

Input/Output Voltage 200→240 V ac

5 digital inputs, 1 digital and 1 relay output, and PTC/PT100 input and

pulse train output (16kHz max)

EMC filters to Class C3 (2nd environment unrestricted distribution)

inbuilt as standard

Input/Output Voltage 380 to 480 V ac Width 70 mmHeight (mm) 169 Depth 142 mm


ACS150-01E-02A4-2 621-1199 unit 1+ 265·00

ACS150-01E-04A7-2 621-1206 unit 1+ 360·00

ACS150-01E-07A5-2 621-1212 unit 1+ 435·00

ACS150-01E-09A8-2 621-1234 unit 1+ 560·00

Specifically designed for variable torque applications such as pumps

and fans

Energy optimizer and Load analyser for automatic optimisation of the

drive, motor and process

Embedded Modbus RTU (EIA-485) fieldbus interface

Unified height and depth across range

Optional Basic (511-0455) and Advanced (511-0449) control panels

available separately

Manu. Part No. Power Rating (kW) Current Rating (A) Stock no.

ACS150-03E-01A2-4 0.37 1.2 621-1256

ACS150-03E-02A4-4 0.75 2.4 621-1240

ACS150-03E-03A3-4 1.1 3.3 621-1278

ACS150-03E-04A1-4 1.5 4.1 621-1284

ACS150-03E-08A8-4 4 8.8 621-1313

Manu. Part No. Power Rating (kW)Width (mm)Current Rating (A)Height (mm)Depth (mm) Stock no.

ACS55-01E-01A4-2 0.18 45 1.4 146.5 128 451-417

ACS55-01E-02A2-2 0.37 45 2.2 146.5 128 451-433

ACS55-01E-04A3-2 0.75 67.5 4.3 146.5 128 451-439

ACS55-01E-07A6-2 1.5 70 7.6 203 155 451-423

ACS55-01E-09A8-2 2.2 70 9.8 203 155 451-427


ACS55-01E-01A4-2 451-417 unit 1+ 240·00

ACS55-01E-02A2-2 451-433 unit 1+ 280·00

ACS55-01E-04A3-2 451-439 unit 1+ 335·00

ACS55-01E-07A6-2 451-423 unit 1+ 445·00

ACS55-01E-09A8-2 451-427 unit 1+ 520·00


ACS150-03E-01A2-4 621-1256 unit 1+ 415·00

ACS150-03E-02A4-4 621-1240 unit 1+ 450·00

ACS150-03E-03A3-4 621-1278 unit 1+ 530·00

ACS150-03E-04A1-4 621-1284 unit 1+ 570·00

ACS150-03E-08A8-4 621-1313a unit 1+ 1130·00

1439

www.nguyenxuong.com

Siemens Micromaster 420/440 Range

Omron Sysdrive 3G3 Range

Mitsubishi D700 Range


60


3G3 JX Series

D720 Three Phase Drives

D720 Single Phase Drives

Single and Three Phase Input 650 Series

200% for 0.5s and 150% for 60s overcurrent capability

Unique random pattern silent switching output for system flexibility

Intelligent IGBT power module technology offers highest levels of reliability

Process PID control

Dual linear or ’S’ ramp for ultra smooth acceleration or deceleration

Independent programme fast ramp stop

Raise/lower digital input ramps

4 programmable skip frequencies

8 programmable preset speeds

Selectable ramp/coast/injection braking modes

Local or remote operation

Description Power Rating

(kW)


(mm)

Manu. Part No. Stock no.

1-Ph input, 0.37kW, Class AFilter

0.37 173 x 73 x 149 6SE64402AB137AA1 465-9959

1-Ph input, 0.75kW, Class AFilter

0.75 173 x 73 x 149 6SE64402AB175AA1 465-9987

3-Ph input, 2.2kW, withFilter

2.2 202 x 149 x 172 6SE64402AD222BA1 466-0072

3-Ph input, 3kW, with Filter 3 202 x 149 x 172 6SE64402AD230BA1 466-0088

3-Ph input, 7.5kW, withFilter

7.5 245 x 185 x 195 6SE64402AD275CA1 466-0117

3-Ph input, 0.55kW 0.55 173 x 73 x 149 6SE64402UD155AA1 466-0274

3-Ph input, 1.5kW 1.5 173 x 73 x 149 6SE64402UD215AA1 466-0303

Controlled start into spinning load

Auto restart after trip for remote applications

Easy connection via spring loaded control terminals, provides quicker wiring times and reliable

connection

0 to 10V, ±10V, 4-20mA set point selection

Analogue output for monitoring speed or load

Designed for world wide applications


1-Ph input, 0.37kW, Class A Filter 465-9959a unit 1+ 593·00

1-Ph input, 0.75kW, Class A Filter 465-9987a unit 1+ 682·00

3-Ph input, 2.2kW, with Filter 466-0072a unit 1+ 1335·20

3-Ph input, 3kW, with Filter 466-0088a unit 1+ 1501·40

3-Ph input, 7.5kW, with Filter 466-0117a unit 1+ 2537·20

3-Ph input, 0.55kW 466-0274a unit 1+ 826·80

3-Ph input, 1.5kW 466-0303a unit 1+ 1026·30

D740 three phase inverter drives suitable for a wide range of drive

applications from simple fan and pump loads through to high-torque

machine control applications. The integral LED display and Digital Dial gives

the user direct access to all important parameters making setup quick &

simple.

Omron’s new generation of environmentally friendly inverters are easy to

program and ideal for a wide range of applications.

D720 single phase inverter drives suitable for a wide

range of drive applications from simple fan and pump

loads through to high-torque machine control

Micromaster 440,1-phase 230V inputor 3-phase 440V input

Single- and three-phase input models available

Microsurge voltage suppression.

Noise measures for peripheral equipment.

Automatic energy-saving function

Side-by-side mounting capability saves space

Emergency shut-off function

IP20 protection rating

Designed to be extremely easy to set-up and

operate

Built-in EMC compliant filters

Integral programming/control module

Sensorless vector control makes it possible to achieve exceptional speed

and torque performance

Serial interface (RS485) as standard

Emergency safe stop input compliant to ISO13849-1 (EN954-1) cat. 3

Maximum short-term overload capacity of 200% for 0.5s

Automatic restart after power failures

Direct connection of an external braking resistor possible for improved

Start/stop, speed and direction

0-10V, 4-20mA or 8-Preset speed control

Two analogue inputs

One analogue output

Two digital inputs

Two user-selectable inputs or outputs

One relay output

One motor thermistor input

Exceptionally compact design

150% overload capability

DIN rail or direct panel mount

Input supply voltage tolerance: ±10%

Omron part no. Input Power Rating Output Current W x H x D mm Weight Stock no.

3G3JX-AE002 1/3-phase 200 Vac 0.2kW 1.4 A 80 x 155 x 97 0.8 kg 543-403



3G3JX-A2002 3-phase 200 Vac 0.2kW 1.4 A 80 x 155 x 97 0.8 kg 543-386






applications. The integral LED display and Digital Dial gives the user direct

access to all important parameters making setup quick & simple.

stopping power

Power Rating

(kW)

Output Current

(A)


(mm)

Input Supply Voltage (V

ac)

Phase

Input

Stock no.

0.37 2.2 137 x 73 x 142 1 Phase, 220 to 240 Single 398-9322

0.75 4 137 x 73 x 142 1 Phase, 220 to 240 Single 398-9344

1.5 4.5 192 x 73 x 173 3 Phase, 380 to 460 Three 398-9417

2.2 5.5 192 x 73 x 173 3 Phase, 380 to 460 Three 398-9423

4 9 257 x 96 x 195 3 Phase, 380 to 460 Three 398-9445

A high performance vector control inverter, offering

more advanced or sophisticated control

Sensorless vector control makes it possible to achieve exceptional

speed and torque performance

Serial interface (RS485) as standard

Emergency safe stop input compliant to ISO13849-1 (EN954-1) cat. 3

Maximum short-term overload capacity of 200% for 0.5s

Automatic restart after power failures

Direct connection of an external braking resistor possible for improved

stopping power


1/3-ph 200Vac, 0.2kW 543-403 unit 1+ 280·00

1/3-ph 200Vac, 0.4kW 543-409 unit 1+ 310·00

1/3-ph 200Vac, 0.75kW 543-419 unit 1+ 375·00

3-ph 200Vac, 0.2kW 543-386 unit 1+ 235·00

3-ph 200Vac, 0.4kW 543-396 unit 1+ 260·00

3-ph 200Vac, 0.75kW 543-392 unit 1+ 295·00

3-ph 400Vac, 0.75kW 543-415 unit 1+ 430·00

3-ph 400Vac, 1.5kW 543-425 unit 1+ 485·00

3-ph 400Vac, 2.2kW 543-421 unit 1+ 580·00

Approvals: CE, UL, cUL, GOST, RoHS

Approvals: CE, UL, cUL, GOST, RoHS

Type Inverter Drive No. Phases 3Series D700 Ambient Temperature Range -10°C → +50 °CIP Rating IP20 Frequency 0.2 → 400 HzVoltage 380 → 480 V ac

Overload capability, 200% rated current for 3s, 150%

rated current for 60s (within 5mins)

High quality integrated PID controller (auto tuning)

Integral class A EMC filter on specified units


Rating (kW)

Stock no. Price

per

OM S$ S$ S$

650/003/230/F/01/DISP/UK/0/0

0.37 398-9322 unit 1+ 410·00

650/007/230/F/01/DISP/UK/0/0

0.75 398-9344 unit 1+ 530·00

650/015/400/F/01/DISP/UK/0/0

1.5 398-9417 unit 1+ 960·00

650/022/400/F/01/DISP/UK/0/0

2.2 398-9423 unit 1+ 1110·00

650/040/400/F/01/DISP/UK/0/0

4 398-9445 unit 1+ 1460·00

Manu. Part No. Current Rating

(A)

Stock no. Price

per

OM S$ S$ S$

FR-D740-012-EC 1.2 691-0013 unit 1+ 375·00

FR-D740-022-EC 2.2 691-0017 unit 1+ 415·00

Note: An operator panel will be required to operate this unit or to modify

the factory set parameters

Type Inverter Drive No. Phases 1Series D700 Ambient Temperature Range -10°C → +50 °CIP Rating IP20 Frequency 0.2 → 400 HzVoltage 200 → 240 V ac

Manu. Part No. Current

Rating (A)

Stock no. Price

per

OM S$ S$ S$

FR-D720S-014-EC 1.4 690-9994 unit 1+ 265·00

FR-D720S-025-EC 2.5 691-0004a unit 1+ 291·00

FR-D720S-042-EC 4.2 691-0007 unit 1+ 385·00

FR-D720S-070-EC 7 691-0001a unit 1+ 414·00

Uses the same accessories as the Micromaster 420, e.g. operation panels

& filter

Integrated braking chopper

1440

www.nguyenxuong.com

Schneider Electric - Altivar Range


60

Many more leading brands from over 2,500 suppliers available online

Altivar ATV31 Series Single PhaseInput

Altivar ATV11 Series Single PhaseInput

Operator PanelsThe Micromaster 420 and 440 series models are

supplied with a Status Display Panel (SDP). When a

higher level of control, information feedback or the

Altivar ATV71 Series Three PhaseConstant Torque Drive

Manu. Part No. Power Rating (kW) Dimensions (H x W x D) (mm) Stock no.

ATV312H037N4 0.37 143 x 105 x 132 701-2729

ATV312HU11N4 1.1 143 x 105 x 132 701-2735

ATV312HU15N4 1.5 143 x 105 x 132 701-2738

ATV31HU30N4 3 184 x 140 x 150 477-5130

ATV312HU30N4 3 184 x 142 x 152 701-2741

ATV312HU40N4 5 184 x 142 x 152 701-2744

ATV312HU75N4 7.5 232 x 180 x 172 701-2757

The Altivar 71 range of variable speed constant torque

drives gives exceptional performance and advanced

functions, with the emphasis on simplicity.

ability to change parameters is required, an operator panel must be

used. There are 2 options: Basic Operator Panel (BOP) or Advanced

Operator Panel (AOP).

Highly compact, with inbuilt class A EMC filter and superb functionality including auto-tuning, brake-

logic control, dynamic breaking, multi-assign logic input, catch on the fly, PI regulation, 16 preset

speeds and many more, all in an an amazingly small product. High levels of torque at low speeds via

sensorless Flux Vector control. Open connectivity with its in-built CANopen and Modbus ports.

Designed for 3 phase asynchronous motors from 0.18 to 15kW. These flexible, compact modules are

suitable for many applications. They can be easily customised and mounted side by side.

Basic Operator Panel (BOP)


ATV312H037N4 701-2729 unit 1+ 469·00

ATV312HU11N4 701-2735 unit 1+ 670·00

ATV312HU15N4 701-2738 unit 1+ 753·00

ATV31HU30N4 477-5130 unit 1+ 1020·00

ATV312HU30N4 701-2741 unit 1+ 1028·00

ATV312HU40N4 701-2744 unit 1+ 1173·00

ATV312HU75N4 701-2757 unit 1+ 1731·00

Sensorless and full flux vector operation, enabling option for full torque at

zero speed

220% overtorque - enabling use in even the most demanding applications

Full Text graphic display, supports easy set-up commissioning and fault

finding, with enhanced messaging

Wide application base support with multiple module support including

extended I/O encoder feedback

Embedded communications with Modbus and CANopen

Number of analogue and digital I/O

“Power Removal” safety system integration

Customisable function names for easy recognition

Six languages as standard and more available

Smart menu and application macros

Monitoring, maintenance and diagnostics (comms and I/O maps) made

much simpler via the display terminal

The ATV11 is the next generation to the ATV08, combining all of the ATV08 functionality with new

technology and features.

Note: Expandability of both the catalogues and digital I/O via optional extension

Altivar ATV31 Series Three PhaseInput

Traverse control

Modbus as standard

CANopen connectivity

Brake sequence

Stopping modes on fault

Motor switching

Autotuning, it quickly adapts to the motor

Operation up to 50°C without derating

Din-rail mounting


Preset speeds

Current limitation

Ramp switching

With this panel the user can change the default settings for a particular

application. Using the BOP it is possible to access to levels 1 to 3 of the

parameter set. Factors which can be modified include:

Sensorless Flux vector technology

Contactor style connection

Easy to commission with 6 quick start parameters

Integral EMC filter

4 programmable logic inputs,1 programmable analogue input

1 fault relay output, 1 programmable logic output

Motor and inverter thermal protection

Overvoltage and undervoltage protection

Frequency range to 200Hz

Memory of last four faults

Single phase input

Panel mounting, IP20 protection rating


ATV312H037M2 0.37 145 x 72 x 132 701-2707

ATV312H075M2 0.75 145 x 72 x 142 701-2704

ATV312HU11M2 1.1 143 x 105 x 132 701-2713

ATV312HU15M2 1.5 143 x 107 x 152 701-2716

Ramp switching

Traverse control

Modbus as standard

CANopen connectivity

Brake sequence

Stopping modes on fault

Motor switching

Autotuning, it quickly adapts to the motor

Operation up to 50°C without derating


Din-rail mounting

Speed

Frequency

Direction of motor rotation

Jog

Manu. Part No. Power Rating (kW) Dimensions (H x W x D) Stock no.

ATV12H018M2 0.18 143x72x102 669-5777

ATV12H037M2 0.37 143x72x121 669-5770

ATV12H055M2 0.55 143x72x132 669-5774

ATV12H075M2 0.75 143x72x132 669-5783

ATV12HU15M2 1.5 143x105x156 669-5786

ATV12HU22M2 2.2 143x105x156 669-5780

Preset speeds

Current limitation


ATV312H037M2 701-2707 unit 1+ 322·00

ATV312H075M2 701-2704 unit 1+ 413·00

ATV312HU11M2 701-2713 unit 1+ 463·00

ATV312HU15M2 701-2716 unit 1+ 493·00

Advanced Operator Panel (AOP)


ATV12H018M2 669-5777 unit 1+ 293·00

ATV12H037M2 669-5770 unit 1+ 345·00

ATV12H055M2 669-5774 unit 1+ 355·00

ATV12H075M2 669-5783 unit 1+ 347·00

ATV12HU15M2 669-5786 unit 1+ 413·00

ATV12HU22M2 669-5780 unit 1+ 503·00

Highly compact, with inbuilt class A EMC filter and superb functionality including auto-tuning, brake-

logic control, dynamic breaking, multi-assign logic input, catch on the fly, PI regulation, 16 preset

speeds and many more, all in an an amazingly small product. High levels of torque at low speeds via

sensorless Flux Vector control. Open connectivity with its in-built CANopen and Modbus ports.

Designed for 3 phase asynchronous motors from 0.18 to 15kW. These flexible, compact modules are

suitable for many applications. They can be easily customised and mounted side by side.

Additional feature over BOP:

Communication via RS-232 interface

Expanded language facility

Diagnostic menu & fault finding assistance

Values displayed e.g. speed, frequency

Capacity to store & download up to 10 parameters sets

Digital & Analogue inputs

Serial link via USS Protocol

Automated system via Profibus connection

Description Manu. Part No. Stock no. Price

per

OM S$ S$

Basic Operator Panel 6SE64000BP000AA0 380-8374a unit 1+ 66·60

Advanced Operator Panel 6SE6400-0AP00-0AA1 380-8380a unit 1+ 266·10

1441

www.nguyenxuong.com

ABB

Digital Motor Load (kW) Monitors

DC Brake Modules

Siemens 3RN1 Thermistor Relays


60

OM = Order Multiple a New product to range * manufacturers information unavailable at time of printing

3RN10-13

Electronic Overload Relay with Integral CTs

Electronic Overload Relays with ShearpinProtection

A powerbrake unit is used where fast, efficient and predictable stopping of a machine in the shortest

possible time is required. Using the d.c. injection method, it provides a controlled deceleration to a

stop, by injecting a d.c. current into two of the motor terminals and neutralising the rotating magnetic

field in the motor after the 3 phase supply has been disconnected. This stops the motor coasting to a

halt and reduces the delay time by this enforced braking. They can be used with a standard 3 phase

induction motor. The unit may be located on a piece of machinery or adjacent to it, with little

disruption or modification required to the existing wiring. The Powerbrake units provide a simple cost-

effective solution to motor braking, which is maintenance and wear-free.,Brake Module - For a brake

unit, all the control wiring has to be supplied and installed by the customer, including interlocked

contactors and pushbuttons.,Production Brakes - Enclosed brakes with all control wiring included,

optional DOL starter built in Injects DC on EVERY stop.,Critical Brake - Enclosed brake with contactors

built in. Must be used with existing starter, also AC must pass through the unit so that it can be

isolated before DC is injected. Only injects DC when E-stop activated.

3RN10-00

3RN10-10

Description Operating Voltage (V ac) Manu. Part No. Stock no.

EL-FI M20 + 10A Current Transformer 3ph 380-500 SS074+SS071 655-0157





ATV71H075N4 0.75 225 x 130 x 149 532-9277

ATV71HU75N4 7.5 289 x 175 x 161 532-9334


ATV71H075N4 532-9277a unit 1+ 1271·00

ATV71HU75N4 532-9334a unit 1+ 3421·00

Standard unit with 1N/O and 1N/C contact. Two LED’s are provided for TRIP

and READY

The DMPRs are available in standard and latching versions and have the

following features:


SS074+SS071 655-0157a unit 1+ 908·00

SS074+SS073 655-0141a unit 1+ 908·00

SS070+SS075 655-0129a unit 1+ 908·00

SS074+SS075 655-0107a unit 1+ 908·00Protection of 3-phase loads e.g. cage induction motors.They monitor

current flowing in 2 of the 3 lines and in the event of an overload condition

the output relay will de-energise after a time delay inversely proportional

to the overcurrent. The units will tolerate a wide (> 2:1) variation in supply

voltage without loss of performance

Compact, low cost unit, with LED ’tripped’ indicator and 1 change over

relay contact. Reset is automatic when sensor has cooled down. Control

and signalling voltages should have the same potential.

Multi-function unit with 2 changeover contacts. Detects

Open or Short circuit sensor and has auto or manual

reset options

0.2 - 32A FLC in one unit

Integral current transformers

Selectable starting delay for high inertia loads

Trip and alarm contacts

Supply, warning and trip indication

Auto/manual/local/remote reset

Delayed or instantaneous reset

Test facility

Product can be used for loads above 32A with use of external CT’s

Retentive trip memory version available (latching)

Supply voltage 115-230Vac

Trip and alarm contacts

Suitable for load currents up to 200A using current transformers

Supply warnings and trip indication

Auto/manual/local/remote reset

Test facility

Independently adjustable starting delay for high inertia loads

Independently adjustable run time

Adjustable reset delay

Accepts thermistor inputs (ove- temperature)

Inhibits single phasing during start-up conditions

Standard 22.5mm module width

Wide 24 to 240Vac supply voltage range


EL-FI Shaft Power Monitors

Supply Voltage 90→270 V acCurrent Rating 0.2→32.0 A

Locked rotor (shearpin protection)


Wide 24 to 240Vac supply voltage range

Function Thermistor Supply Voltage 24 to 240 Vac/dcOutput 1NO 1NC Relay

Function Thermistor Supply Voltage 24 Vac/dcOutput 1CO Relay

The EL-FI M20 supervises induction motor driven

equipment and provides alarms when abnormal

loads are detected. The EL-FI M20’s ability to

provide reliable monitoring and protection

ensures production equipment is optimised and

expensive breakdowns and interruptions are

For suitable current transformers, see stock nos. 291-1227, and 291-1233


3RN10101CW00 417-9908 unit 1+ 133·10

Description Manu. Part No. Stock no. Price per OM S$ S$

DMPO (Standard) RSDMPO23050000 185-3243 unit 1+ 440·00

Stock no. Price

per

OM S$ S$ S$

417-9879 unit 1+ 76·10

Manu. Part No. Supply Voltage

(Vac/dc)

Stock no. Price

per

OM S$ S$ S$

3RN10131BW10 24 to 240 417-9914a unit 1+ 256·60

Supply Voltage 115 - 230 V acCurrent Rating up to 200 A

For motors up to 999A

Description Manu. Part No. Stock no. Price per OM S$ S$

DMPR (Standard) RSDMPRS000 198-4971 unit 1+ 610·00

DMPR (Latching) RSDMPRL000 198-4987 unit 1+ 670·00

Approvals: CE, cUL (UL and CSA up to 600V)

cards (stock nos. 534-9423 & 534-9439). Dimensions quoted relate to each drive unit with no option

card installed.

100-690Vac (single & three phase)

The motor is used as the sensor

Unique algorithm for calculating motor power losses

One Touch Auto Set (hassle-free commissioning)

Four alarm levels: Max and Min Main Alarm; Max and Min Pre-Alarm

Analogue output with P-span/scaling (0-20, 4-20, 20-0 or 20-4mA)

Digital input for external Auto Set, Reset or Blocking Alarm

Fully programmable with LCD screen

Readout in true figures i.e. 5kW, Amps etc

Compact size - 90 x 45 x 115mm

Easy 35mm DIN rail mounting

IP20

minimised. Due to the special method of subtracting motor power

losses, the monitor is able to accurately measure the shaft power

supplied by the motor to the application. This advanced technique

allows the EL-FI M20 to monitor the application load only as opposed

to the total motor load, which includes varying motor losses.,Typical

applications include monitoring pumps: centrifugal, impeller, screw,

magnetically driven, submersible, lobe motor, peristaltic and

membrane types. Also suitable for monitoring tool failure on

machine tools, mixer protection, jamming material of free-running

conveyors, automatic doors, blocked screw feeds,etc.

1442

www.nguyenxuong.com

Portescap Motors and Gearheads


60


16mm DC Motor Escap 16G 4.5W

22mm Precision dc Servo SystemMotors Brushed 22N28

26mm DC Motor Escap 26N58 5.7W

28mm DC Motor Escap 28L28 11W

Servo Potentiometer Mount Kit

22mm Planetary Gearhead EscapR22

Ovoid Gearbox

Injection Brake Modules

16mm DC Motor Escap 16N28 1.7W

A precision engineered kit of parts designed to

accommodate conductive plastic servo potentiometers for

mounting onto the back of dc. motor precision gearboxes

(refer to the Resistors/Potentiometers section)

Motors can be connected to our range of ovoid, spur or

planetary gearboxes to increase output torque and lower speed

Low mechanical inertia

Low electrical and iron losses

Negligible cogging

Lack of any preferred armature position

Precious metal alloy brush and commutators

Self-lubricating sintered bronze bearings

High reliability and maintenance-free

High quality planetary gearboxes that can be fitted to a

range of brushed and brushless dc servo motors.

High quality ovoid reduction gearboxes of similar

construction to the synchronous gearboxes. A double-ended

Ø4mm output shaft is fitted in order to accommodate a servo

potentiometer mounting kit and conductive plastic

potentiometers, when used in positional servo

applications.,Alternatively, the gearbox and precision dc

motor combination can be employed in low inertia speed

control systems.

These modular electronic units are designed for the smooth braking of

3 phase ac. induction motors from 1.1 to 5.5kW as used on production

and process machinery.

The modules use the principle of injecting a dc. current into the stator

windings producing a stationary magnetic field. This stationary field has

the effect of retarding the rotor and stopping the drive transmission.

Braking is initiated by external control devices such as push buttons,

limit switches, etc. which in turn power up the module and close the

ancillary braking contactor (not supplied). For suitable contactors see

the Control Gear/Switchgear Section of the Catalogue.

Electronic modules have the following benefits over mechanical

equivalents.

A high power 16mm diameter precious metal brush motor

which offers similar torque outputs to the larger 22mm units

These motors are able to fit to the R16 gearheads offering a

compact, powerful combination

Power Rating 5.7 W No Load Speed 6700 rpmBody Diameter 26 mm Maximum Continuous Torque 11 mNmLength 43.3 mm Torque Stalled 25 mNmShaft Diameter 3 mm Voltage Rating 24 V(dc)Shaft Length 10.6 mm

Body Diameter 22 mm Shaft Length 12 mmShaft Diameter 4 mm

Compact size. The modules are suitable for mounting on 35mm

symmetrical DIN rail

Easy to retrofit

Suitable for use with stock no. 294-3662

Supplied with: a motor adaptor plate, fixing screws and

pinion to enable the dc. precision motors to be fitted.

Power Rating 4.5 W Voltage Rating 12 V(dc)Body Diameter 16 mm No Load Speed 9700 rpmLength 28 mm Maximum Continuous Torque 4.7 mNmShaft Diameter 1.5 mm Torque Stalled 11.2 mNmShaft Length 6 mm

Power Rating 11 W Voltage Rating 24 V dcBody Diameter 28 mm No Load Speed 5600 rpmLength 43.5 mm Maximum Continuous Torque 21 mNmShaft Diameter 3 mm Torque Stalled 50 mNmShaft Length 10 mm

Power Rating 3.8 W Shaft Diameter 2 mmBody Diameter 22 mm Shaft Length 11 mmLength 33.5 mm

Body Diameter 16 mm No Load Speed 10800 rpmLength 28 mm Maximum Continuous Torque 2.4 mNmShaft Diameter 1.5 mm Torque Stalled 3.1 mNmShaft Length 6.5 mm Power Rating 2.3 WVoltage Rating 12 V(dc)


253-2521 unit 1+ 198·50


336-214 unit 1+ 65·50

Fast initiation of braking function on demand (typically within 0.6 seconds)

No maintenance required

Adjustable braking time and braking torque

Self powered from two-phase supply

Height 62.8 mm Shaft Diameter 4 mmWidth (mm) 50 Shaft Length 10 mmDepth 16.5 mm

Voltage Rating (V dc) Stock no. Price per OM S$ S$ S$

24 192-5988a unit 1+ 282·00


441-5361 unit 1+ 177·50

Ratio Maximum Continuous

Torque (N m)

Length

(mm)

Stock no.

33:1 * 32.5 719-091

111:1 * 40 719-114

641:1 4.5 40 719-142

Voltage Rating (V(dc)) No Load Speed (rpm) Torque Stalled (mNm) Stock no.

6 5600 10.5 718-969

12 5900 8.7 718-975

24 8400 10.4 718-981

Voltage Rating (V(dc)) Stock no. Price per OM S$ S$ S$

12 192-5938a unit 1+ 122·00

Ratio Stock no. Price per OM S$ S$ S$

15:1 336-236 unit 1+ 83·00

80:1 440-537 unit 1+ 81·00

160:1 336-258 unit 1+ 91·00

640:1 336-264 unit 1+ 102·50

1250:1 336-270 unit 1+ 104·50

2560:1 336-286 unit 1+ 115·50


6 718-969 unit 1+ 122·50

12 718-975 unit 1+ 139·00

24 718-981 unit 1+ 139·00


33:1 719-091 unit 1+ 123·00

111:1 719-114 unit 1+ 138·50

641:1 719-142 unit 1+ 186·00

Applications for injection brakes include:-

Braking of machinery with long run down time due to high inertia loads; circular saws, rolling mills and

other process equipment where rapid stopping of plant will increase cycle or retooling time.

Note: These modules are primary for use as production brakes and should not be used inemergency situations.Supplied with: comprehensive instruction leaflet.

Supply Voltage 3 Phase, 380 to 415 V ac Width 45 mmHeight 75 mm Depth 120 mm

Power Rating (kW) Stock no. Price per OM S$ S$ S$

2.2 209-6384 unit 1+ 395·00

5.5 209-6407 unit 1+ 570·00

1443

www.nguyenxuong.com

Maxon Motors and Gearheads


60


22mm Brushed Servo Motors, Model A

22mm Miniature dc Motors

26mm Miniature dc Motors

32mm Miniature dc Motor, Model B

10mm Miniature dc Motor

13mm Miniature dc Motor, RE-max Model

36mm Miniature dc Precision Servo Motor, REModel

Precision Instrument Gearboxes

Motors intended to be used with planetary gearheads; assembly is quick and easy to do, requiring

no special tools

Low inertia - low mechanical time-constant for fast acceleration and high speed stability

High efficiency - low current consumption, ideal for battery-powered applications

Linear speed-torque characteristics - simple, accurate control; ideal for servo applications

Precious metal brush commutation system guaranteeing consistent and low contact resistance

CLL disc fitted on the precious metal brush motors - reduces arcing between the brushes and

commutator (the main cause of brush wear on precious metal brush motors), thereby increasingly

operating life and reducing electrical noise

Miniature dc Servo Motor

Motors intended to be used with planetary gearheads;

Precious metal brushed for longer life, with minimum

power consumption

High performance dc servo motors using Neodymium

(NdFeB) magnets and graphite brushes

Ideal for small servo drives, and leadscrew drives

Dual shafts to enable both a gearhead and an encoder to

be fitted

Stock no. 420-4953 has a shorter rear shaft to enable

fitment of an encoder e.g. (stock no. 205-6869) using

fitting kit (stock no. 420-5120)

Revised brushgear for improved commutation and

reliability

Designed for a long operational life

More powerful than the A-Max range of equivalent

High quality ovoid gearboxes

Precision cut metal gear system

Suitable for fitting to 24mm spur or 22mm planetary

Suitable for fitting to 26mm planetary gearheads e.g.

assembly of the two is quick and easy, requiring no special tools

Speed Constant: 2230rpm/V (stock no. 468-4810); 1000rpm/V (stock

no. 468-4826)

gearheads

Ideal for scientific instrumentation, medical and process control

equipment

Fitted pinion and

interface for

compatibility with the

planetary gearheads

Life expectancy - Many

factors affect the life of a

dc. motor but the low

inductance moving coil

rotor ensures maximum

brush and commutator

life. In some applications

Pinion fitted to motor shaft for fitment to suitable

gearhead and are replacements for Model A 32mm

motors (Discontinued stock no. 236-2704)

Speed Constant: 396rpm/V (stock no. 420-4931);

250rpm/V (stock no. 420-4947)

stock no. 445-0263

Speed Constant: 689rpm/V (stock no. 445-0241 ); 374rpm/V

(stock no. 445-0257)

Low starting voltage with high efficiency operation

Precision-made rolled-steel housing provides high strength

with low weight

motors

Neodymium magnets

Precious metal brushes

Speed Constant: 1880rpm/V (stock no. 443-4069); 1140rpm/V

(stock no. 443-4081)

These motors can be used with GP42 42mm gearheads e.g. (stock no. 420-5041) using ftting kit

(stock no. 468-4769)

Suitable control module Maxon ADS50-5 (stock no. 418-5571)

Speed Constant: 215rpm/V (stock nos. 323-5029 and 420-4953)

Power Rating 1.2 W Maximum Continuous Torque 1.28 mNmBody Diameter 13 mm Stall Torque 2.67 mNmShaft Diameter 1.5 mm No Load Speed 11200 rpmShaft Length 3.65 mm Length 20.5 mmVoltage Rating 12 V(dc)

All ratios suitable for 7.5° stepper motors, stock nos. 332-947, 351-4574,

440-262, and 199-863

All ratios suitable for DC motor stock no. 432-9765 using adaptor kit 432-

9721

Power Rating 0.75 W Shaft Diameter 1 mmBody Diameter 10 mm Shaft Length 2.7 mmLength 17 mm

a life of greater than 20000 hours is achievable

Sintered bearings - High quality low noise

Mates with planetary gearheads

Speed Constant: 1250rpm/V (stock no. 440-111); 2980rpm/V (stock no. 440-127)

Power Rating 15 W Shaft Diameter 4 mmBody Diameter 32 mm Shaft Length 9.8 mmLength 62.9 mm

Power Rating 5 W Voltage Rating 12 V(dc)Body Diameter 22 mm No Load Speed 6647 rpmLength 31.9 mm Maximum Continuous Torque 6.34 mNmShaft Diameter 2 mm Stall Torque 15.66 mNmShaft Length 10 mm Output Speed 6696 rpm

Power Rating 11 W Shaft Diameter 3 mmBody Diameter 26 mm Shaft Length 10.8 mmLength 44.7 mm

Voltage Rating 24 V(dc) Maximum Continuous Torque 77.1 mNm

Power Rating 5 W Shaft Length 6.5 mmBody Diameter 22 mm Length 31.9 mmShaft Diameter 2 mm

Supplied with: fitting instructions, screws for mounting the motor plus a

pinion which may be easily fitted to the motor spindle using high strength

retainer stock no. 473-417 (not supplied) and the pacer tool provided.

Manu.

Part

No.

Voltage

Rating (V(dc))

Maximum

Continuous

Torque (mNm)

Stall

Torque

(mNm)

No Load

Speed

(rpm)

Stock no.

118386 6 0.784 1.25 13000 468-4810

118391 12 0.746 1.01 11600 468-4826

Power Rating 1 W Length 29.2 mmNo Load Speed 7400 rpm Shaft Diameter 1.2 mmBody Diameter 17 mm Shaft Length 6.6 mm

Manu. Part

No.

Voltage

Rating (V(dc))

No Load Speed

(rpm)

Maximum Continuous Torque

(mNm)

Stall Torque

(mNm)

Stock no.

242467 12 4670 36 95.9 420-4931

242472 24 5930 36.7 127 420-4947


134385 262-2157 unit 1+ 88·50

Voltage

Rating (V

(dc))

No Load

Speed

(rpm)

Maximum

Continuous Torque

(mNm)

Stall

Torque

(mNm)

Stock no.

12 8010 14.2 66.6 445-0241

24 8820 17.2 77.6 445-0257


203892 443-4081 unit 1+ 139·00

Voltage

Rating (V

(dc))

No Load

Speed

(rpm)

Maximum Continuous

Torque (mNm)

Stall

Torque

(mNm)

Stock no.

9 8760 6.33 14.33 323-4896

18 9970 6.25 15.66 323-4903

36 9800 6.15 22.3 420-5209

Manu. Part No. Voltage Rating (V(dc)) Stall Torque

(mNm)

Stock no.

2017.938-22-162-016 6 2.6 440-111

2017.941-22-162-028 12 1.92 440-127


118386 468-4810 unit 1+ 88·50

118391 468-4826 unit 1+ 88·50

Height 62.8 mm Shaft Diameter 4 mmWidth (mm) 50 Shaft Length 10 mmDepth 16.5 mm


242467 420-4931 unit 1+ 230·00

242472 420-4947 unit 1+ 230·00


110937 445-0241 unit 1+ 235·00

110940 445-0257 unit 1+ 235·00


110120 323-4896 unit 1+ 80·00

110124 323-4903 unit 1+ 83·50

110127 420-5209 unit 1+ 88·00


25:6 332-868 unit 1+ 49·10

25:2 336-450 unit 1+ 56·50

25:1 336-444 unit 1+ 56·50

50:1 336-438 unit 1+ 56·50

125:1 336-422 unit 1+ 62·50

250:1 336-416 unit 1+ 62·50

15000:1 336-400 unit 1+ 82·00


2017.938-22-162-016 440-111 unit 1+ 125·50

2017.941-22-162-028 440-127 unit 1+ 125·50

1444

www.nguyenxuong.com

Mclennan Servo Supplies

Permanent Magnet Motors


60


Encoder Mounting Kit

24mm Spur Gearhead GS

17mm Planetary Gearheads

29mm Dia. Model 9904

Carbon Brush dc Motor, Series R

42mm Direct Drive dc Motor

Model Motors

45mm Miniature dc Motor, Model EC45 Flat

Encoder Unit

Como Drills

Mellor Electric

This encoder is required when operating motors with

Precious metal commutation for long life and minimum

power consumption

Skewed low inertia ironless rotor for rapid acceleration and

optimum control

Low speed/high torque for low audible noise

Ideal for wide range of instrumentation drives

Suitable for use with RS Synchronous Gearbox

The motors and gearheads are connected by simply

These gearheads are intended to be used with 22mm

The kit enables encoders to be fitted to various

Brushless DC motors of flat design with a low profile body

Speed constant: 374rpm/V

Available in 2 versions: Standard, stock no. 420-4997, or

with Hall effect sensors, stock nos. 420-5192 and 495-063

Standard version is suitable for conventional voltage

dependent applications

Hall effect versions ideal for feedback speed controlled

applications

Suitable controller for the standard version Maxon

controller AECS35-3 (stock no. 418-4051)

Suitable controller for the Hall effect versions Maxon

controller DEC50-5 (stock no. 418-4045)These permanent magnet field motors have carbon brushes,

hardened steel shaft, lubricated for life bearings and internal

suppression for EMC emission

They are ideal for low cost applications requiring efficient motors,

such as for movement or pumping

stock nos. 418-4045, 418-5571 or similar type of

controller

Line driver built into the encoder

Type A

Voltage Rating 24 V(dc) Body Diameter 42 mmPower Rating 31 W Length 84.8 mmMaximum Continuous Torque 70 mNm Shaft Diameter 6 mmStall Torque 298 mNm Shaft Length 23.1 mmNo Load Speed 4010 rpm

Voltage Rating 24 V(dc)

screwing the gearhead onto a thread on the motor body, and then

applying tiny spot of high impact adhesive in the thread to lock

the construction tight.

diameter motors.

motors, which require the use of a encoder

The kit includes sleeves to fit shafts with diameters of

4mm, 6mm and 6.35mm (1/4inch) which allows hollow

shaft encoders to be used

Voltage Rating 12 V(dc) Body Diameter 29 mmMaximum Continuous Torque 6 mNm Length 39.5 mmStall Torque 29 mNm Shaft Diameter 3 mmNo Load Speed 3800 rpm Shaft Length 11 mm

To facilitate connection of the motor to the controller, the use of a motor connection unit is

recommended

Utilise the 4 way unit (stock no. 420-5091) for the standard motor 420-4997 and the 8 way unit (stock

no. 420-5108) for motor (stock no. 420-5192)


110518 420-5136 unit 1+ 168·00

Body Diameter 36 mm Shaft Diameter 6Front/ 4Rear mmLength 71.2 mm Shaft Length 15.7Front/ 15Rear mm

Voltage Rating 12 V dc Body Diameter 43.2 mmPower Rating 30 W Length 16.4 mmMaximum Continuous Torque 53.8 mNm Shaft Diameter 4 mmNo Load Speed 4370 rpm Shaft Length 17.4 mm


82 800 502 236-1694a unit 1+ 161·00


250/4/6/8 420-5120 unit 1+ 29·20

Continuous Output Torque 0.1 mNm Shaft Length 6.2 mmBody Size Ø 24 mm Length 17.4 mmShaft Diameter 2.7 mm


432-9765 unit 1+ 108·00

Manu.

Part No.

Stall Torque

(mNm)

No Load

Speed (rpm)

Body

Diameter (mm)

Length

(mm)

Shaft

Diameter (mm)

Shaft Length

(mm)

Stock no.

RS360 23 5600 27.7 32.6 2.3 9 248-3687

RS380 35 6500 27.7 37.8 2.4 13.8 248-3716

RS555 100 3500 36 57 3.2 8.7 248-3671

Very high output torque due to planetary construction

All the gear stages are metal construction


30W 12Vdc Hall Effect 420-5192 unit 1+ 116·50

Type B

No Load Speed

(rpm)

Power Rating

(W)

Continuous Output Torque

(mNm)

Stall Torque

(mNm)

Stock no.

5093 70 77.1 624 323-5029

4670 15 36 95.9 420-4953


20:1 323-6072 unit 1+ 105·00

32:1 323-6088 unit 1+ 105·00


RS360 248-3687 unit 1+ 20·50

RS380 248-3716 unit 1+ 21·00

RS555 248-3671 unit 1+ 27·00

Body Diameter 17 mm Shaft Length 5.3 mmShaft Diameter 3 mm

Ratio Continuous Output Torque (Nm) Length (mm) Stock no.

84:1 0.20 23 440-133

370:1 0.25 26.6 440-149

1621:1 0.30 30.2 440-155

Motors available

in a selection of

speeds, input

voltages and

output torques

Ideal for

development and

education

projects, demo

Manu. Part

No.

Stall Torque

(mNm)

Stock no. Price

per

OM S$ S$ S$

118799 624 323-5029 unit 1+ 410·00

142750 95.9 420-4953 unit 1+ 410·00

rigs, test rigs and simple or low cost movement or placement applications


84:1 440-133 unit 1+ 89·50

370:1 440-149 unit 1+ 109·00

1621:1 440-155 unit 1+ 120·50

Voltage

Rating

Power

Rating

(W)

Maximum

No Load

Speed (rpm)

Output

Speed

(rpm)

Stall

Torque

Maximum

Efficiency

Torque (N

m)

Dia.

(mm)

Length

(mm)

Shaft

Diameter

(mm)

Shaft

Length

(mm)

Stock no.

3 V dc 1.21 14000 11300 0.0053 Nm

0.001 21 21 2.0 8.3 238-9692

12 V dc 4.04 10668 8321 0.014 Nm

0.003 27.6 32.5 2.3 8.2 238-9715

12 V dc 6.21 12600 11500 0.040 Nm

0.007 27.7 38 2.3 11.5 238-9737

6/12Vdc*

21.2 15800 13360 0.098 Nm

0.015 35.8 50 3.2 8.5 238-9759

12 V dc 36.8 5167 4283 482.8mNm

0.082 51.8 69 6.35 13.2 321-3186

12 V dc 157 9778 8311 614mNm

0.092 51.8 69 6.35 13.2 321-3192

Description Supply Voltage Range (Vdc) Stock no. Price

per

OM S$ S$

Type A, 3Vdc 1.2W 1.5 to 3 238-9692 unit 1+ 3·48

Type A, 12Vdc 4W 6 to 15 238-9715 unit 1+ 10·80

Type A, 12Vdc 6.2W 6 to 15 238-9737 unit 1+ 11·50

Type B, 12Vdc 21W 4.5 to 15 238-9759 unit 1+ 16·10

Type B, 12Vdc 37W 12 321-3186 unit 1+ 58·00

Type B, 12Vdc 157W 12 321-3192a unit 1+ 61·70

1445

www.nguyenxuong.com

DC Brushless Motors

Low Profile DC Motors

Shunt Wound Motors


60


42mm 3 Phase 24Vdc Servo Motor

Low Profile dc Motors

dc Shunt Wound Motors

Servo Motor Fitted with Encoder

Heavy Duty dc Motor & Encoder

Accessories

Low Inertia Servo Motor

A d.c. motor which can be used either on their own or in

combination with the adaptable gearboxes

Quick change brush system

Encoder system which can easily be fitted to the rear

output shaft of each motor (this can give 1 pulse per

motor revolution). This can be used with a digital tacho

feedback unit to create an analogue signal in proportion

to the speed of the motor

Sintered bronze bearings

Description Stock no. Price

per

OM S$ S$ S$

Replacement Brushes 320-613 unit 4+ 17·80

Encoder Kit 715-134 unit 1+ 49·80

Gearbox/dc Motor Adaptor Kit ’C’ 718-953 unit 1+ 14·70

Fitted to servo motor a

dual track incremental

encoder, to provide

accurate digital control

in applications which

require smooth

operation and digital

velocity or positional

control. The encoder

DC motor technology with electronic commutation using

permanent magnets offering speeds up to 4000rpm.

Powerful, low profile

motors offer many

benefits when compared

to a conventional

permanent magnet dc

motor.

Note: The starting torque of the motor should be taken into account when sizing applications.

Provides a smooth

operation over a wide

speed range

Incorporates a skewed

ironless rotor which

ensures linear speed and

torque characteristics,

combined with a rapid

acceleration and reversal

Low electrical emissions,

thereby simplifying the

provides a choice of dual track TTL output signals 500 pulses per revolution, thereby enabling

positioning resolutions up to 2000 counts per rev. to be obtained

Constant speed characteristics with

the difference between no-load and

full load speed being 10% to 20% of

Power Rating 16 W Length 84.8 mmNormal Running Speed 2000 rpm Shaft Diameter 6 mmHeight 42.2 mm Shaft Length 25.6 mmWidth 42.2 mm Torque 750 N cm

Hall sensor feedback

Suitable encoders and gearboxes may be fitted as

required

Low profile

construction requires

less space than a

conventional motor

Long motor life even

Supply Voltage 24 V(dc) Peak Torque 27 N cmPower Rating (W) 30 Dia. 66 mmMaximum No Load Speed 2200 rpm Length 96.8 mmNormal Running Speed 1600 rpm Shaft Diameter 6 mmRated Torque 9 N cm Shaft Length 15.2 mm

filter circuits necessary for EMC compliance

Carbon brushes for a long maintenance free life when used with either linear or PWM drive circuits

rated speed

Output ratings based on pure dc supply (FF1)

Reversible, 4 leads as standard

Starting current, 3 times full load (approx)

Terminal box connection for 20mm conduit

Replacement brushes available separately (see

accessories)

Note: A dc servo controller is required to operate these

motors, stock no. 418-4045


263-6011 unit 1+ 425·00

Supply Voltage 24 V(dc) Peak Torque 36 N cmPower Rating (W) 30 Dia. 66 mmMaximum No Load Speed 2300 rpm Length 72.8 mmNormal Running Speed 1600 rpm Shaft Diameter 6 mmRated Torque 12 N cm Shaft Length 15.2 mm

Shaft Size (S,M,L) MVoltage 220 V dc

when operated at full rating

High power to weight ratio

Very smooth running at slow speeds

Fast acceleration from rest under full load conditions

Low inductance

Low brush sparking

Low r.f.i. emissions

Available in two magnet materials:

Supply

Voltage (V

dc)

Maximum No Load

Speed (rpm)

Stock no. Price

per

OM S$ S$ S$

12 3370 715-106 unit 1+ 195·00

24 3100 715-112 unit 1+ 205·00

M Style uses ferrite magnet material

N Style uses rare earth magnet material

Motor

Type

Power Rating

(W)

Input Current

(A)

Speed (rpm)

(rpm)

Height

(mm)

Width

(mm)

Length

(mm)

Stock no.

SD12 125 0.9 3000 119.5 142.5 167 266-317

SD11 95 0.75 3000 106.5 129.5 144 716-020

SD12 150 1.1 4000 119.5 142.5 167 716-042

Speed (rpm) 4000 Width 42 mmRated Voltage 24 V Shaft Diameter 5 mmHeight (mm) 42 Shaft Length 19 mm


263-5995 unit 1+ 265·00

N Style provides up to 2 1⁄2 times power, three times higher torque, from the same size motor

compared with M type

Motor Type Stock no. Price per OM S$ S$ S$

SD12 266-317a unit 1+ 439·00

SD11 716-020 unit 1+ 440·00

SD12 716-042 unit 1+ 440·00

Rated Torque

(N m)

Max. Peak Torque

(Nm)

Torque

Constant

Peak Current

(A)

Length

(mm)

Rotor Inertia (Kgm2

x 10-6

)

Stock no.

0.0625 0.19 0.035 5.4 41 24 536-6024

0.25 0.75 0.036 20 100 96 536-6030

Normal Running Speed 3000 rpm

Rated Torque (N m) Stock no. Price per OM S$ S$ S$

0.0625 536-6024 unit 1+ 155·00

0.25 536-6030 unit 1+ 210·00

Dimension A (mm) Dimension

B (mm)

Dimension

C (mm)

Dimension

D (mm)

Dimension

E (mm)

Dimension

F (mm)

Dimension

G (mm)

Stock no.

120 6 30 12 4.8 110 26 225-9541

152 10 53 27 5.8 142 25 225-9579

Supply

Voltage

(V dc)

Power

Rating (W)

Maximum No

Load Speed

(rpm)

Rated Torque

(N cm)

Dia.

(mm)

Length

(mm)

Shaft

Diameter

(mm)

Shaft

Length

(mm)

Stock no.

14.5 41 5660 13 120 38 6 18 225-9541

23.5 110 4300 35 152 52 10 26 225-9579

Description Power

Rating (W)

Stock no. Price

per

OM S$ S$ S$

Low Profile M Style 41 225-9541 unit 1+ 260·00

Low Profile M Style 110 225-9579 unit 1+ 305·00

1446

www.nguyenxuong.com

Mclennan Servo Supplies

RS

DC Geared Motors

Portescap

Crouzet


60


Brushless Motors with SpeedControl

38mm Ironless 12/24Vdc Motor and SpurGearbox

27mm 12Vdc Geared Motor: 1271

33mm 12/24Vdc Geared Motor:IG33

26mm Precision dc Servo SystemMotors Brushless

Brushless dc Motor, 57x57

Trident Engineering

Variable speed brushless motor with integrated drive

electronics e.g. speed control

The integration of power amplifier & speed loop circuitry within

the motor greatly simplifies control

Simply connect a speed control potentiometer and direction

switch for bi-direction velocity control

Digital output signal enables motor speed to be accurately

monitored

Smooth running due to its external rotor design

The reversible motor has an ironless rotor giving linear speed-

torque performance

The commutation system uses precious metal brushes for

high efficiency and sensitivity to suit servo application and

general-purpose requirements

The gearbox construction employs a fibre wheel first stage

followed by steel gears on bronze shafts

Output drive shaft has a flat machined on to simplify load

coupling

Electrical connections are via rear solder tags

Designed for applications such as vending machines,

magnetic card readers, printer mechanisms, actuators and

all types of coin control systems

Fitted with an all metal gearhead with sintered iron gears

running on hardened steel shafts. The output shaft runs in

sintered bronze bearings

Five pole armature with VDR suppression

A brushless servo motor with integral control electronics. The

motors can be connected to our range of ovoid, spur and

planetary gearboxes to increase torque and reduced speed

Long life due to brushless construction. Therefore high

reliability and low maintenance

Linear speed characteristics for precision speed control

No cogging

High temperature range capability

Ideal for applications where a long operating life, with quiet

operation, reliability and no maintenance are of prime importance

No brushes mean no wear, no mechanical or electrical noise, no

sparks or interference

Built in electronics for motor speed control, removing the need for

an external drive board

Fail safe motor protection, current limiting, thermal protection and

timed cut-off for locked rotor

351-5189 features regulation for closed loop operation without the

need for an encoder

Height 57 mm Output Speed 3410 rpmWidth 57 mm Torque (Nm) 0.085 Shaft Length 22.5 mm Depth (mm) 73.2 Input Current 2.2A max Shaft Diameter 6 mmPower Rating 30 W

Used for a wide range of

applications requiring low speed

and a small size

Electrical interference free

Ease of control via 6 wire lead

Width 38 mm Shaft Length 15 mmShaft Diameter 6 mm

IP 55 protection rating

Can be fitted to a wide range of gearboxes/heads

Ideal for many industrial & scientific applications including conveyors, paper feeds, pumps, mixers

Body Diameter 33 mm Shaft Length 9.5 mmShaft Diameter 5 mm

Supply Voltage (V dc) Output Speed (rpm) Torque (mNm) Body Length (mm) Stock no.

12 180 100 57.8 258-8287

12 70 200 57.8 258-8300

12 29 300 62.3 258-8322

12 11 300 62.3 258-8350

12 5 300 66.8 258-8372

24 190 100 57.8 258-8293

24 75 200 57.8 258-8316

24 30 300 62.3 258-8344

24 12 300 62.3 258-8366

24 5 300 66.8 258-8388

Integral iron core dc motor gives a smooth operation

and a bi-directional variable speed capability

The gear head utilises a multi-stage metal spur gear

train

Has an integral VDR suppression system to minimise

electrical interference

Voltage Rating 15 V(dc) Length 32 mmNo Load Speed 8800 rpm Shaft Diameter 2 mmMaximum Continuous Torque 4.4 mNm Shaft Length 10 mmBody Diameter 26 mm

Supply Voltage (V dc) Power Rating (W) Output Speed (rpm) Torque (mNm) Length (mm) Stock no.

12 2.9 227 200 68 255-9582

12 2.9 136 200 68 255-9598

12 2.6 68 300 70 255-9605

12 2.6 41 600 70 255-9611

12 2.3 20 600 73 255-9627

12 2.1 8 600 75 255-9649

12 2.1 4 600 75 255-9655

24 4 230 200 68 440-313

24 4 135 200 68 440-329

24 4 70 300 70 440-335

24 4 42 600 70 440-341

24 4 21 600 73 440-357

24 4 8 600 75 440-363

24 4 4 600 75 440-379

Voltage Rating 24 V(dc) Length 62.1 mmNo Load Speed 3650 rpm Shaft Diameter 6 mmBody Diameter 68 mm Shaft Length 22.5 mm


80 030 003 351-5189 unit 1+ 560·00 Supply Voltage 12 V dcBody Diameter 27 mmShaft Diameter 4 mmShaft Length 11 mm

Supply Voltage

(V dc)

Output Speed

(rpm)

Stock no. Price

per

OM S$ S$ S$

12 227 255-9582 unit 1+ 118·00

12 136 255-9598 unit 1+ 143·00

12 68 255-9605 unit 1+ 146·00

12 41 255-9611 unit 1+ 121·50

12 20 255-9627 unit 1+ 129·50

12 8 255-9649 unit 1+ 160·00

12 4 255-9655 unit 1+ 151·00

24 230 440-313 unit 1+ 120·00

24 135 440-329 unit 1+ 119·00

24 70 440-335 unit 1+ 119·00

24 42 440-341 unit 1+ 119·00

24 21 440-357 unit 1+ 125·00

24 8 440-363 unit 1+ 125·00

24 4 440-379 unit 1+ 125·00


719-013 unit 1+ 245·00

Power

Rating

(W)

Maximum Continuous

Torque (mNm)

Stock no. Price

per

OM S$ S$ S$

35 110 512-6012 unit 1+ 345·00

50 170 512-6028 unit 1+ 405·00

Supply Voltage

(V dc)

Output Speed

(rpm)

Stock no. Price

per

OM S$ S$ S$

12 180 258-8287 unit 1+ 94·00

12 70 258-8300 unit 1+ 94·00

12 29 258-8322 unit 1+ 94·00

No Load Speed (rpm) Output Speed (rpm) Torque (mNm) Body Length (mm) Stock no.

125 80 25 36 245-6089

60 40 38 41 245-6095

30 18 80 41 245-6102

14 9 140 46 245-6118

7 5 200 46 389-609

No Load Speed (rpm) Stock no. Price per OM S$ S$ S$

125 245-6089 unit 1+ 40·50

60 245-6095 unit 1+ 40·50

30 245-6102 unit 1+ 40·50

14 245-6118 unit 1+ 40·50

7 389-609a unit 1+ 54·20

1447

www.nguyenxuong.com

Crouzet Geared Motors

MFA Como Geared Motors


60


36mm 24Vdc Geared Motor: Series R

Nylon Geared - Light Duty Motors

Nylon Geared - Heavy Duty Motors

Geared DC Motor Series 82 861

Geared DC Motors, Heavy Duty

63mm Diameter Geared Motors

15mm Planetary Geared Motors - 941DSeries

38mm 12/24Vdc Geared Motors Motor:3GP3

38mm 12/24Vdc Geared Motor: Model2947

Philips

Como Drills

Mellor Electric

Philips Components

A range of compact, powerful and robust dc. geared motors

Extremely quiet, making them ideal for applications where

silent running is required

65mm square gearbox is all metal construction

The motors have integrated front bearings and a helical

gearbox

This gear reduction unit has fitted a dc motor stock no. 248-

3671 to give the final output speeds listed below

Designed for industrial and model applications

Robust powerful high quality motor with sintered bronze

bearings

All metal gearbox has bronze output bearings enabling

Supplied with two output shaft adaptors to convert the 6

mm output shaft to:

a) a 10 mm output shaft for general use or

b) a special 3.4mm A/F tongued shaft

Graphite brushed motor

Coupled to a high quality planetary gearhead

Skewed motor winding gives a low cogging torque,

which results in a smooth operation

Typical applications include pick and place, or ticket

dispensing machines

Permanent magnet dc motors with integral gearboxes housed in

a tough grey polyacetal resin case

Electrical connections are via solder tags on the motor body

Integral interference suppressor

Spur gear heads with steel gear fitted to a dc motor

Provides a powerful cost effective solution for CCTV,

pumps & other movement applications

Supply Voltage 12 V dc Width 54 mmPower Rating 5 W Length 64.6 mmOutput Ratio 81: 1 Shaft Diameter 4 mmOutput Speed 60 rpm Shaft Length 14.5 mmTorque 0.30 Nm

high torque transfer from the motor through to the gearbox

Width 39 mm Shaft Diameter 4 mmLength 67 mm Shaft Length 8.55 mm

Note: Motors are bi-directional, the quoted rotation is when

the positive supply is connected to the motors positive

terminal.

Power Rating 33 W Width 65.1 mmTorque 5 Nm Shaft Diameter 8 mmHeight (mm) 65.1 Shaft Length 15 mmLength 142.5 mm

Stock no. Price

per

OM S$ S$ S$

440-082 unit 1+ 111·00

Supply Voltage 24 V dc Length 87.5 mmHeight 96 mm Shaft Diameter 8 mmWidth 63.5 mm Shaft Length 25 mm

Power Rating 14 W No Load Speed 20 rpmBody Diameter 38 mm Output Speed 20 rpmShaft Diameter 6 Front/ 4 Rear mm Stall Torque 23130 mNmShaft Length 17 Front/ 16.5 Rear mm Torque 4000 mNmSupply Voltage 24 V dc Body Length 105.6 mm

Supply Voltage 12 V dc Width 64.1 mmPower Rating 17 W Length 126 mmTorque 1200 mNm Shaft Diameter 6 mmHeight 81.6 mm Shaft Length 5 mm

Power Rating 3.9 W Length 60.8 mmTorque 0.5 Nm Shaft Diameter 4 mmHeight (mm) 65.9 Shaft Length 10 mmWidth 54.2 mm

Height 38 mm Supply Voltage 24 V dcWidth 38 mm Output Speed 23 rpmShaft Diameter 6 mm Torque 600 mNmShaft Length 15 mm Length 107.6 mm

Note: Parameters shown in table relate to 12V operation.


398-9849 unit 1+ 390·00

Supply

Voltage (V dc)

Power

Rating (W)

Output

Ratio

Output

Speed (rpm)

Torque

(Nm)

Stock no.

12 2.2 50:1 60 0.125 336-315

12 2.2 9:1 330 0.025 336-321

6 2.1 50:1 60 0.125 336-337

6 2.1 9:1 330 0.025 336-343

Manu. Part No. Supply Voltage (V dc) Output Speed (rpm) Stock no.

82 861 010 12 54 178-4759

82 861 021 24 11 178-4888

82 861 020 24 22 178-4872

82 861 018 24 108 178-4850

Supply Voltage (V) Output Ratio Output Speed (rpm) Manu. Part No. Stock no.

24 12.25:1 147 80 835 004 224-3596

24 61.25:1 29.4 80835008 224-3603

24 24.5:1 73 72 820 419 224-3625

12 24.5:1 73 73 820 420 224-3647

Output Speed (rpm) Stock no. Price per OM S$ S$ S$

100 320-590 unit 1+ 300·00

20 320-607 unit 1+ 335·00

Output Speed (rpm) Torque (mNm) Stock no. Price per OM S$ S$

80 3900 248-3700 unit 1+ 129·00

160 2000 248-3867 unit 1+ 129·00


80 835 004 224-3596 unit 1+ 455·00

80835008 224-3603 unit 1+ 485·00

72 820 419 224-3625 unit 1+ 510·00

73 820 420 224-3647 unit 1+ 465·00

Supply Voltage

(V dc)

Output Speed

(rpm)

Stock no. Price

per

OM S$ S$ S$

12 11 258-8350 unit 1+ 94·00

12 5 258-8372 unit 1+ 94·00

24 190 258-8293 unit 1+ 100·00

24 75 258-8316 unit 1+ 100·00

24 30 258-8344 unit 1+ 104·00

24 12 258-8366 unit 1+ 104·00

24 5 258-8388 unit 1+ 112·00

Supply Voltage (V dc) Stock no. Price per OM S$ S$ S$

12 336-315 unit 1+ 74·50

12 336-321 unit 1+ 74·50

6 336-337 unit 1+ 77·00

6 336-343 unit 1+ 77·00


82 861 010 178-4759 unit 1+ 118·00

82 861 021 178-4888 unit 1+ 112·00

82 861 020 178-4872a unit 1+ 109·00

82 861 018 178-4850a unit 1+ 109·00

Accessories


363-6674 unit 1+ 128·00

Reduction Table (rpm) - 941D

Manufacturer Part No. 3V 6V 9V 12V

941D41 350 800 1300 1800

941D621 18 50 82 119

941D2311 5 14 23 32

941D10141 1.25 3.1 5 6.8


Replacement Brushes 320-613 unit 4+ 17·80

Supply Voltage Range (Vdc) 3 to 12 Shaft Diameter 3 mmPower Rating 0.5 W Shaft Length 9 mm

Manu. Part No. Output Ratio Rated Torque (gcm) Stock no.

941D41 4:1 1000 417-9683

941D621 62:1 2000 417-9706

941D1981 231:1 2500 417-9712

941D10141 1041:1 3000 420-710

1448

www.nguyenxuong.com

General Purpose Geared DC Motors


60


35mm Spur Geared Motors - 950D Series

Model Motors & Gearboxes - Multi-Ratio

Model Motors & Gearboxes - Spur

Multi-Ratio Development Kit

Type 111 Geared dc Motors



Como Drills

Como Drills

Como Drills

Como Drills

Como Drills

This kit contains a selection of gears, in addition to a rack,

screw & crown, gear & chain. These items are ideal for

development work.

Direction Of Rotation Reversible Length 167 mmHeight 95 mm Shaft Diameter 9 mmWidth 64 mm Shaft Length 22 mm


Robust units which boast a high quality motor


High torque transfer from the motor through the gearbox

due to bronze output bearings


239-6886 unit 1+ 32·50

These motors have in-line metal gears fitted; the final output

speed is determined by the motor supply voltage.


Robust powerful high quality 5 pole motor with sintered

bronze bearings

All metal gearbox has high torque transfer from the motor

through to the gearbox due to bronze output bearings


Robust units which boast a high quality five pole motor


High torque transfer from the motor through the gearbox

due to bronze output bearings

Unit is mounted on a 1mm thick plated steel bracket

These motors have an offset multi-ratio plastic gearbox

fitted. They are available in two formats, either assembled

or unassembled. The assembled is supplied in a final ratio of

4096:1. The unassembled are supplied with 4:1 ratio pinion

gears which can be assembled to produce ratios from 4:1 to

4096:1, depending on how many gears are fitted. The final

output speed is determined by the motor supply voltage.



Power Rating

(W)

Normal Running Speed

(rpm)

Torque

(Nm)

Stock no.

16 25 6 668-5528

16 25 6 668-5521

20 40 5 380-8633

20 40 5 380-8649


Selection guide

Output speed (rpm) v. gear ratio

4:1 16:1 64:1 256:1 1024:1 4096:1

238-9844 & 238-9850 @ 3.0V 2300 575 144 36 9 2

238-9636 & 238-9642 @ 3.0V 3700 925 231 57 14 4

238-9822 & 238-9838 @ 24V 4199 1050 261 67 16 4

Reduction Table (rpm) - 918D series 25mm

Manufacturer Part No. 1.5V 3V 6V 12V 18V 24V

918D15112 – – 280 560 840 1120

918D30112 – – 140 280 420 560

918D100112 – – 42 84 126 168

Supply Voltage Range (Vdc) 4.5 to 15 Shaft Diameter 6 mmPower Rating 6.21 W Shaft Length 17 mm


Reduction Table (rpm) - 919D series 35mm

Manufacturer Part No. 4.5V 6V 9V 12V 15V

919D111 540 718 1077 1436 1800

919D501 120 158 237 316 395

919D1481 40 53 80 106 132

919D8101 7.5 10 15 20 25

919D30001 1.5 2 3 5 6

Shaft Diameter 3 mmShaft Length Adjust mm

Reduction Table - Gearbox Ratio (rpm)

Voltage V 5:1 100:1 516:1

4.5 700 35 6

6.0 1000 50 8.5

9.0 1600 77 14

12.0 2150 103 19

15.0 2800 134 25

Manu. Part

No.

Body Diameter

(mm)

Voltage (V

dc)

Output

Ratio

Output Torque

(Nm)

Shaft Diameter

(mm)

Stock no.

918D15112/1 25 6 → 24 15:1 0.039 4 413-0616

918D30112 25 6 → 24 30:1 0.059 4 413-0638

918D100112-4 25 6 → 24 100:1 0.098 4 413-0622

919D111 35 4.5 → 15 10:1 0.294 6 238-9664

919D501 35 4.5 → 15 50:1 0.294 6 321-3164

919D1481 35 4.5 → 15 148:1 0.59 6 238-9670

919D8101 35 4.5 → 15 810:1 0.59 6 321-3170

919D30001 35 4.5 → 15 3000:1 0.59 6 417-9649


(rpm)

Stall Torque

(Nm)

Maximum Efficiency Torque (N

m)

Length

(mm)

Stock no.

5:1 Ratio 3090 0.490 0.076 74.9 454-0877

100:1 Ratio 145 9.807 1.514 77.7 454-0883

516:1 Ratio 27 50.603 7.813 87.1 454-0899


Manu. Part No. Output Ratio Rated Torque Stock no.

950D111 10:1 3000 gcm 454-0827

950D501 50:1 3000 gcm 454-0833

950D1001 100:1 6000 gcm 420-596

950D1481 148:1 6000 gcm 454-0849

950D5001 500:1 6000 gcm 420-671

950D8101 810:1 6000 gcm 454-0855

950D30001 3000:1 19.22 Nm 454-0861

Supply Voltage (V dc) Power Rating (W) Stock no.

1.5 to 3 1.29 238-9642

12 to 24 1.62 238-9822


918D 25mm 24V 15:1 413-0616 unit 1+ 27·50

918D 25mm 24V 30:1 413-0638 unit 1+ 27·70

918D 25mm 24V 100:1 413-0622 unit 1+ 29·60

919D 35mm 15V 10:1 238-9664 unit 1+ 48·10

919D 35mm 15V 50:1 321-3164 unit 1+ 51·50

919D 35mm 15V 148:1 238-9670 unit 1+ 55·50

919D 35mm 15V 810:1 321-3170 unit 1+ 64·50

919D 35mm 15V 3000:1 417-9649 unit 1+ 66·50

Description Output Speed (rpm) Stock no. Price per OM S$ S$

5:1 Ratio 3090 454-0877 unit 1+ 56·00

100:1 Ratio 145 454-0883 unit 1+ 84·00

516:1 Ratio 27 454-0899 unit 1+ 83·50


(rpm)

Stall Torque

(Nm)

Maximum Efficiency Torque (N

m)

Length

(mm)

Stock no.

5:1 Ratio 2150 0.197 0.032 64 417-9655

100:1 Ratio 103 4.095 0.640 77 417-9661

516:1 Ratio 19 21.13 3.304 83 417-9677


950D111 454-0827 unit 1+ 44·00

950D501 454-0833 unit 1+ 44·00

950D1001 420-596 unit 1+ 41·00

950D1481 454-0849 unit 1+ 44·00

950D5001 420-671 unit 1+ 48·30

950D8101 454-0855 unit 1+ 51·50

950D30001 454-0861 unit 1+ 58·50


Multi-Ratio Unassembled RE140 238-9642 unit 1+ 13·70

Multi-Ratio Assembled RE280/1 238-9822 unit 1+ 27·30

Description Output Speed (rpm) Stock no. Price per OM S$ S$ S$

5:1 Ratio 2150 417-9655 unit 1+ 54·00

100:1 Ratio 103 417-9661 unit 1+ 79·00

516:1 Ratio 19 417-9677 unit 1+ 84·50


941D41 417-9683 unit 1+ 36·50

941D621 417-9706 unit 1+ 50·50

941D1981 417-9712 unit 1+ 59·50

941D10141 420-710 unit 1+ 58·00

1449

www.nguyenxuong.com

Permanent Magnet Motor and Single WormGearboxes

Shunt Wound Motor and In-Line DoubleWorm Gearbox

DC Drives - Brushed


60

OM = Order Multiple


www.rssingapore.com

MB Gearbox with 50Vdc PM2Motor

Shunt Wound Motor and In-Line Double Reduction Combinations. All motors in this range are 220Vdc.

SD1 Motor & MIW GearboxCombination

Potentiometer 12-32V

PWM DC 8A 12-32Vdc




The motor drive is a PWM-based DC-motor driver. The materials

and features meet the industrial environment requirements. The

device is CE marked and has been tested through EMC

measurements required by industrial environment.Motor voltage

is regulated against supply voltage changes, and there is also a

load compensation (RxI) adjustment. Thanks to these features

drive offers good performance in motor speed control applications.

The current limit and the rpm range are adjustable with trimmer

potentiometers. The power stage of the device is protected against

short-circuit and overload (over temp.).The drive is easy to mount

EM-174 motor drive is designed for DC-motor speed control. The

unit regulates motor voltage so a non regulated supply voltage is

suitable. Potentiometer or direct voltage signal can be used to give

the speed control value. Rotation direction changes when control

input value turns negative or if control input signal is applied to

direction input.The unit has reference positive and negative signal

for potentiometer use, i.e. the potentiometer can also be used to

drive in both directions, the motor stops at potentiometer middle

position. Set value range can be scaled to range trim.,During a

direction change, the controller waits for motor to stop before

driving in opposite direction. This avoids current peaks at direction

Type Permanent Magnet Motor/ Worm Gearhead Power Rating 46 WOutput Torque 20 NmNormal Running Speed 22 rpm

in a 10mm hole in an assembly panel.

change. The current limit can be set with a pot or direct voltage signal to protect the motor and

mechanics in jam situations. Start up speed can be limited an acceleration ramp, which slowly rises

the motor voltage in a desired way. Ramp time is set with a pot.EM-174 can be optimised for 12 or 24 V

supply use.

Direction Of Rotation Reversible Width 38 mmPower Rating 8 W Length 192 mmNormal Running Speed 40 rpm Shaft Diameter 9 mmTorque 200 N cm Shaft Length 18 mmHeight 100 mm

Motor Type SD1 Shaft Diameter 12 mmPower Rating 38 W Shaft Length 51 mmHeight 124 mm Output Speed 2.2 rpmWidth 122.5 mm Output Torque 1700 NcmLength 207 mm

Type Permanent MagnetMotor/ WormGearhead

Length 206 mm

Direction OfRotation

Reversible Shaft Diameter 12 mm

Height 119 mm Shaft Length 25 mmWidth 95 mm

Note: Motor (stock no. 716-137) available separately

Type Permanent Magnet Motor/ Worm Gearhead Power Rating 40 WOutput Torque 15 NmNormal Running Speed 25 rpm


397-067 unit 1+ 570·00

Supply Voltage (V dc) Stock no. Price per OM S$ S$ S$

12 380-8661 unit 1+ 185·50

24 380-8683 unit 1+ 194·00

Power Rating 160 WCurrent Rating 3.8 A

1 Quadrant

Panel mountable

Small size

Motor power 5-80W

Load compensation Rxl

Adjustable current limit

EMC tested (CE marked)

Overload and short circuit protected

Bi-directional

No brake

Controlled direction change +/-10v or 0-10v

Soft start ramp


Load compensation (IR comp)

Description Voltage

(V dc)

Power

Rating (W)

Output

Torque

(Nm)

Normal

Running

Speed (rpm)

Stock no.

12Vdc 45rpm 8Nm 12 40 8 45 668-5503

24Vdc 45rpm 9Nm 24 40 9 45 668-5512

12Vdc 95rpm 3Nm 12 28 3 90 668-5515

24Vdc 95rpm 3Nm 24 28 3 90 668-5519

Description Voltage (V dc) Manu. Part No. Stock no.

12Vdc 25rpm 15Nm 12 258.1710.20.00 668-5525

24Vdc 25rpm 15Nm 24 258.1710.30.00 668-5534

Description Voltage (V dc) Manu. Part No. Stock no.

Type259 Geared DC motor 12Vdc 22rpm 20Nm 12 259.3710.20.00 668-5537

Type259 Geared DC motor 24Vdc 22rpm 20Nm 24 259.3710.30.00 668-5531


319.1862.20.00 668-5503 unit 1+ 370·00

319.1862.30.00 668-5512 unit 1+ 390·00

319.1846.20.00 668-5515 unit 1+ 445·00

319.1846.30.00 668-5519 unit 1+ 445·00


258.1710.20.00 668-5525 unit 1+ 620·00

258.1710.30.00 668-5534 unit 1+ 780·00

Supply

Voltage

Power Rating

(W)

Stock no. Price

per

OM S$ S$ S$

12 V dc 16 668-5528 unit 1+ 240·00

24 V dc 16 668-5521 unit 1+ 250·00

12 V 20 380-8633 unit 1+ 220·00

24 V 20 380-8649 unit 1+ 250·00


259.3710.20.00 668-5537 unit 1+ 1080·00

259.3710.30.00 668-5531 unit 1+ 1060·00

Motor Current (continuous) 3 A @ 50°C Supply Voltage 12 to 24 V dcMotor Current (peak) 6 A for 10 s Dimensions (H x W x D) 37x38x30 mmShort Circuit Current 30 A Weight 75 gCurrent Limit Adjustment 0.5→6 A

Output Speed

(rpm)

Output Torque

(Ncm)

Stock no. Price

per

OM S$ S$ S$

100 630 718-026 unit 1+ 510·00

200 390 718-054 unit 1+ 510·00


510-1215 unit 1+ 160·00

1450

www.nguyenxuong.com

DC Drives - Brushless

RS


60


4-Quadrant Module

Motor Control Module

ADS 50 series

DEC 50-5

Small Power 0-360W

Low Voltage 12/24V

Motor Voltage Regulator

Motor Speed Regulator, Panel Mounting Como Drills

Como Drills

This range of cost effective low voltage dc. motor controllers

are suitable for use with permanent magnet dc. motors up

to 12A. The boxed version is protected to

IP22.,Comprehensive instruction sheet supplied.

The Module has a variety of uses which include the speed control of motors up to

3 Amps maximum current consumption. Pulse Width Modulation provides

proportional output control and torque maintenance. Output control is achieved

by varying the output pulse. The unit is supplied with insulating washers and is

easy to install with inputs and outputs clearly indicated. Must not be used with

digital inputs. Maximum current 3A continuous, 5A peak

Cost-effective dc motor speed controllers suitable for use

with shunt and permanent dc motors, such as the

Parvalux range. The built-in EMC and Harmonic Filters

can enable a complete drive to conform with the

statutory EMC and Harmonics directives

The unit comprises a mains-driven power supply feeding a

variable-gain pre-amplifier, 5.1Vdc stabilised reference

supplies, and a driver amplifier with adjustable gain.,All

outputs are short-circuit protected and the output current of

the driver amplifier to the motor can be adjusted (via one

external resistor) to between 380mA and 25mA. This feature

can be used to protect the servo system from damage in the

event of a mechanical overload. In the position control mode

the 5.1V reference supplies can be connected to the servo

system feedback pot and a control pot.,Can be scaled to

produce a 90° servo movement. In the speed control mode

the pre-amp is disconnected and no feedback potentiometer

The DEC (Digital EC amplifier) is a very efficient digital 1 Q amplifier

for commutation of 3 phase brushless dc. motors with Hall effect

sensors (i.e. maxon EC40) up to 250W

The controller can operate in a number of different modes either as a

speed controller, current control or open loop speed control

Set value reference can be by either internal or external

potentiometer or by analogue voltage. Functions include set

maximum current, direction, adjustable speed ramp, disable, motor

braking, 2 pre set speeds

A variable speed regulator unit is for use with electric motors,

miniature drill equipment etc. Its very small size which allows it to

be easily installed, especially where space limitation is an

important factor. Adjustment is by a miniature slotted screwdriver

(supplied) allowing preset speeds to be securely set. Speed

regulation is by PWM which provides proportional output control

and helps to maintain torque. Provided with spade connectors on

input power lead.Must not be used with digital inputs. Maximum

current 3A continuous, 5A peak.

The ADS50 is a powerful servo amplifier for the control of

Input Voltage 6 → 15 V dc Width 25 mmOutput Voltage Modulated Relative to input Depth 15 mmHeight 33 mm

Adjustable maximum and minimum speeds

IR compensation

Adjustable overload

Fused input supply

Supply either lead acid battery or mains with the addition

of suitable transformer, rectifier and smoothing capacitors

Note: This controller requires the motor to be fitted with Hall effect

sensors for correct operation.

High transient overload capability

Improved commutation with considerably increased

brush life

Smoother, quieter running

Adjustable maximum and minimum speeds

Fused input supply


Adjustable IR compensation

Control potentiometer supplied with panel mounting

This module is a 4-quadrant, linear output driver which is suitable for driving small dc. motors and

gear motors up to 60 watts.

is required.,A control potentiometer regulates the output speed of the motor up to 7400 rpm max. in

either direction. A useful feature of the motor drive amplifier is the adjustable gain control. This allows

the output resistance of the amplifier to be adjusted between zero and a negative value exceeding the

nominal armature resistance of the motor. This results in a reduction in the speed variation with

mechanical loading. All connections are via PCB type terminal blocks with the mains connector and

low voltage connector at opposite ends of the metal case.

brushed permanent magnet dc. motors

Input Voltage 6 → 15 V dc Width 41 mmOutput Voltage Modulated Relative to input Depth 40 mmHeight 61 mm

This unit requires an external power supply, e.g. stock no.

597-554


417-9728 unit 1+ 41·00

Supply Voltage 12 to 32 V dc Ramp Up/Soft Start Time 0-3 sOvervoltage Protection 40 V Dimensions (H x W x D) 65x73x30 mmControl Current 8A Cont. 12A Peak 50/50% Weight 80 gCurrent Limit Adjustable 0→12 A

version as standard

Four operating modes can be selected by DIP switches on the

amplifier

Speed control using tacho, encoder or IR compensation or torque

(current) control are available

The controller has additional motor chokes fitted to allow motors

with very low inductances to be used

Adjustment is by a series of potentiometers on the amplifier for IR

feedback, offset, max. speed, max. current and gain

Designed to provide position or bi-directional speed control for 12V precision dc servo motor, stock no.

718-975.

The relationship between the control potentiometer angular displacement and the motor rotation can

be varied using just one resistor, e.g. a 25° movement from the joystick pot, stock no. 467-9032

Supply Voltage 10 → 50 V dc Width 95 mmOutput Current 5 A Depth 75 mmHeight 14 mm


238-9816 unit 1+ 31·40

Only single polarity voltage supply is required to achieve bi-directional motor speed control

Employs armature feedback technique to maintain speed regulation

Adjustable current limit facility

Short circuit protection

Speed control by external or internal potentiometer, or dc. control voltage

Inbuilt thermal protection

Supply Voltage 10 to 38 V dc Width 133.5 mmOutput Current 2 A Depth 54 mmHeight 25 mm

Input Voltage 12 / 24 V dc Form Factor 1.05 in.Armature Output Voltage 0→12/0→24 Vdc Height 217 mmArmature Output Current 12 A Depth 81 mm

Supply Voltage 100 to 120Vac/200 to 240 V ac Width 137 mmOutput Current 0.025 / 0.38 A Depth 74 mmHeight 41 mm


510-1209 unit 1+ 340·00

Available in two styles, panel mounting and boxed, to provide a protection rating of IP22. For more

demanding environment there is an IP54 version available (stock no. 418-3597 or 419-1425)


230572 418-4045 unit 1+ 290·00

Supply Voltage 12 to 50 V dc Width 180 mmHeight 26 mm Depth 103 mm

Description Current Rating (A) Manu. Part No. Stock no.

5A Controller 5 145391 418-5571

10A Controller 10 201583 445-0178


450-9674 unit 1+ 295·00

Input Supply Frequency 50/60 HzArmature Output Voltage 200 Vdc Field Output Current 0.25 AInput Voltage 110 / 240 V acHeight 226 mm


313-2122 unit 1+ 265·00

Description Armature Output Current (A) Form Factor (in.) Width (mm) Depth (mm) Stock no.

260 W Panel Mount 1.3 1.05 125 80 244-2901

260 W Boxed 1.3 1.05 134 83 244-2917

360 W Boxed 2.0 1.2 134 83 425-5232


5A Controller 418-5571 unit 1+ 610·00

10A Controller 445-0178 unit 1+ 700·00


260 W Panel Mount 244-2901 unit 1+ 220·00

260 W Boxed 244-2917 unit 1+ 300·00

360 W Boxed 425-5232 unit 1+ 350·00

1451

www.nguyenxuong.com

Parker SSD Range


60

OM = Order Multiple ➤ Indicates more pricing available online

Low Voltage Type 2021

Series 2600 Reversible Motor Controller

SSD 506, 507 & 508 Speed Controllers

512C Range Speed Controllers

Digital Tacho Feedback Unit Frequency toVoltage Converter

72 to 288W, Unregulated Power Supplies

Low Voltage Reversing Controller

Suitable for permanent magnet and wound field dc

motors

Supply 12 or 24Vdc battery or linear power supply

Continuous rating 24A, maximum current limited to less

than 36A

Adjustable electronic current limit up to 36A

Speed control by potentiometer

Soft start

Heatsink thermally protected

Running/Fault/Trip indication

The 512C range of isolated dc. motor speed controllers are suitable for use

with both dc. shunt and permanent magnet motors.

Compact non-isolated motor speed control modules for dc. shunt wound

and permanent magnet field motors.

Purpose designed power supplies for use with low voltage motor

controllers. They are also suitable for many other applications which

require an unregulated linear power supply.

Microprocessor powered controller for permanent magnet, shunt

wound, flat style and general purpose dc. motors.

Small low-cost converter designed to be a cost-effective

solution to interfacing proximity switches to analogue

voltage equipment (e.g. dc motor controllers, analogue

measuring or computing equipment).

Drive healthy relay driver output - 24Vdc

Speed trim input

Input Voltage 110 / 240 V acDimensions (H x W x D) 108x138x300 mm

Reversing versions of the RS low voltage controllers,

allowing both forward and reverse direction control of the

motor speed.

Operates from a battery or rectified smooth dc. supply

12 or 24V dc. supply voltage

15 or 30A current rated version

Forward and reverse direction control

Protected against short circuit to output and polarity

misconnection

DIN rail mounting

Suitable for 110/120 or 220/240V single phase ac. supplies (switch

selectable)

Fully isolated heatsink

Control signals available for zero speed, drive health and speed trim

Adjustable speed ramp up and ramp down times (1-15 secs)

Adjustable motor maximum and minimum speed limits

Adjustable armature current limit (0-100%)

Adjustable I.R. compensation (for armature voltage feedback control)

Switch selectable speed range

Switch selectable feedback mode either tacho-generator or armature

Adjustable load compensation

Single quadrant drive

Two input frequency ranges 0-400Hz and 0-2000Hz

On-board fusing

High and low frequency selectable outputs with LED

indicators

Features of 512C and 514C Range Speed Controllers

Output Voltage (V dc) Output Current (A) Stock no.

12 12 597-560

24 6 597-576

24 12 597-582

48 6 597-598

Gain adjustable on output voltage

Auxiliary 12Vdc output for driving proximity switches

ac or unidirection signal inputs

Input Voltage 12 / 24 V dc Width 84 mmArmature Output Current 24 A Depth 51 mmHeight 181 mm

voltage

Torque control of the motor is achieved by regulation of the armature current

Stall timer will isolate the motor current after 15 seconds to prevent the motor overheating

Inbuilt protection devices, high energy transient suppression, fuseless overcurrent protection

above 200% overload


Suitable for use with purpose-designed motor controller

power supplies, e.g. stock no. 597-554

Available for 12 or 24Vdc motors with a maximum current

rating of 12A, either enclosed or panel mounting versions.

Adjustable up to 15 or 30A continuous rating, 27 or 56A peak

Settable presets for high or low speed, overcurrent, acceleration

Output Voltage (V dc) Stock no. Price per OM S$ S$ S$

12 597-560 unit 1+ 400·00 5+ 280·00 10+ 265·00

24 597-576 unit 1+ 345·00 5+ 245·00 10+ 240·00

24 597-582 unit 1+ 470·00 5+ 325·00 10+ 310·00

48 597-598 unit 1+ 400·00 5+ 280·00 10+ 275·00

Armature Output Current 0→12 A Height 216 mmArmature Output Voltage 0→24 V(dc) Input Voltage 24 V dc

Note: The mains supply must be fused.

Jumper selectable single phase input voltage 110/120 or 220/240 or 380/

415V ±10%

Linear current feedback allowing accurate torque

Zero speed or zero set point relay driver output - 24Vdc

Total setpoint output

Stall detection and trip

Field bridge suitable for UK or continental voltages

or deceleration

Fault indication via flashing LED for overcurrent, current tripped, low supply voltage, over

temperature

Over current and thermal protection, progressive thermal shutdown


TACHO 9 440-509 unit 1+ 135·00


419-1431 unit 1+ 250·00

Description Width (mm) Depth (mm) Stock no.

Panel Mount, 24V 125 80 244-2670

Boxed, 24V 134 82 244-2686

Description Width (mm) Stock no. Price per OM S$ S$ S$

Panel Mount 125 440-486 unit 1+ 200·00

Boxed 134 440-492 unit 1+ 255·00

Height 61 mm Supply Voltage 24 V dcWidth 132 mm Current Rating 15 ADepth 148 mm

Overload capacity 150% of nominal current for 60s

Adjustable maximum current level

Adjustable maximum and minimum speed

Supply Voltage 1 Phase, 110 to 120V/220 to 240 V ac Field Output Current 2 AArmature Output Voltage 90 or 180 V Height 140 mmField Output Voltage 100 or 210 V Width 104 mm


Panel Mount, 24V 244-2670 unit 1+ 270·00

Boxed, 24V 244-2686 unit 1+ 375·00

Adjustable I.R. compensation (for armature voltage feedback speed control)

Adjustable speed stability

Independent control of speed ramp, both up and down from 0-40s

Indication of mains supply on, stall trip and overcurrent trip

Switch selectable current calibration

Switch selectable Armature/Tacho generator feedback

Buffered 0-10V output for a speed reference or meter

Buffered 0-7.5V output for a current meter (7.5V = 150%)

Comprehensive instruction manual.


363-9601 unit 1+ 245·00

Manu. Part No. Armature Output Current (A) Depth (mm) Stock no.

507/01/20/00 6 79 197-7434

508 12 89 197-7456

506/01/20/00 3 79 237-3170

Supplied with: a comprehensive instruction manual.

Manu. Part No. Stock no. Price

per

OM S$ S$ S$

507/01/20/00 197-7434 unit 1+ 305·00

508 197-7456 unit 1+ 380·00

506/01/20/00 237-3170 unit 1+ 245·00

Supply Voltage 1 Phase, 110/240/415 V ac Field Output Current 2 AArmature Output Voltage 90/180/320 V Height 240 mmField Output Voltage 100/210/370 V Width 160 mm

Manu. Part

No.

Armature Output

Current (A)

Stock no. Price

per

OM S$ S$ S$

512C-08 8 197-8077 unit 1+ 620·00

512C/16/01/00/00

16 197-8083 unit 1+ 670·00

512C-32 32 197-8099 unit 1+ 890·00

512C/04/01/00

4 237-1461 unit 1+ 475·00

1452

www.nguyenxuong.com

0.9° and 1.8° Hybrid Stepper Motors


60


High Torque Stepper Motor 57 x 57, 200 step

Size 16 Slimline Hybrid StepperMotor

HSX Range Motors

Gearbox/ Motor Adaptor Kit

Adaptable Gearboxes 4Nm

1.8° Step Angle,The motors are directly compatible with the stepper motor drive boards and also drive

either motor (if required) in the half step mode i.e. 0.9° per step resulting in higher resolution, greater

performance stability and faster stepping rates. Direction, velocity, acceleration/deceleration can be

controlled by a stepper motor controller.,Applying the correct electrical pulse sequence to the

windings of the stepper motor results in a 1.8° step angle rotation of the spindle (i.e. 200 steps per

revolution). When correctly loaded and driven these motors will produce discrete output steps. The

number of steps and speed of rotation are determined by the number of pulses and frequency of the

input signal. This provides an ideal method for speed and position control. The motors are directly

compatible with stepper motor drive boards.,Applications include:

Stepper Motors With/WithoutRear Shaft Extensions

Robotics

Paper feed mechanisms

Teletype printers

Small machine tools

Computer peripherals

X-Y plotters

The gearbox is attached to the motors using the

appropriate adaptor kit, which contains the screws and

pinions required

The pinion is connected to the motor output shaft with

the aid of the high strength retainer (not supplied),

example stock no. 473-417

High energy Neodymium magnets used

50% more torque than conventional hybrid types

A range of high quality steel geared gearboxes with the following

features:Current Per Phase 2.8 A Height 56.4 mmFrame Size 57 mm Width 56.4 mmStep Angle 1.8 ° Shaft Diameter 6.35 mmNumber Of Wires 4 Shaft Length 19 mm

Compact 4 phase hybrid stepper motor provides:

Maximum output 4Nm

Metal throughout for high reliability and performance and dissipation of

heat


Maximum radial load on output shaft 25N

Maximum axial load on output shaft 20N

Maximum continuous output power 15 watts

Output shaft sealed to eliminate grease escaping from the gearbox

Comprehensive instruction sheet supplied giving fitting instructions

8 wire format provides a choice of either Uni-polar or Bi-polar operation

200 steps/rev when used with full step drives or 400 steps/rev when used

in half step mode

NEMA frame sizes

Voltage

Rating (V

dc)

Resistance Per

Phase (Ω)

Inductance Per

Phase (mH)

Holding

Torque

(mNm)

Length

(mm)

Stock no.

2.5 0.9 2.5 1260 56 535-0439

3.2 1.13 3.6 1890 76 535-0445

High resolution of 200 steps/rev (400 steps/rev 1⁄2 step)

20.5mm body length for installation in confined space

Ideal for high resolution instrument drives

Low current consumption

Motor Style Stock No. Adaptor Kit

1.8° Stepper, Size 17 440-420, 440-436, 191-8299, 191-8306 A1.8° Stepper, Size 23 440-442, 440-458, 191-8334, 191-8328, 191-8340, 191-8356, 191-8362,

191-8378, 191-8384 C

7.5° Stepper, Unipolar 440-284, 440-290 B7.5° Stepper, Unipolar 440-307 C7.5° Stepper, Size 2 332-953 BReversible Synchronous 440-391, 440-408 BReversible Synchronous 440-414 CMR Series 40mm 351-4669 G

Height 66 mm Width (mm) 66

Voltage Rating

(V dc)

Holding Torque

(mNm)

Stock no. Price

per

OM S$ S$ S$

2.5 1260 535-0439 unit 1+ 123·00

3.2 1890 535-0445 unit 1+ 179·50


per

OM S$ S$ S$

Gearbox/dc Motor Adaptor Kit ’A’ 718-931 unit 1+ 10·80

Gearbox/dc Motor Adaptor Kit ’B’ 718-947 unit 1+ 21·00


Voltage Rating 6.2 V dc Width 39 mmFrame Size 16 (39mm sq) Length 20.5 mmStep Angle 1.8 ° Shaft Diameter 5 mmHeight 39 mm

Step Angle 1.8 °Number Of Wires 8

Some motors have 8-lead configuration allowing

maximum flexibility for connection to any standard

stepper motor drive boards. The windings can be

connected in series or parallel for different drive

requirements

A number of the motors are supplied with 0.1in.

connector fitted to the flying lead (see table below), all are

supplied with leads

Recommended suitable header is stock no. 479-181Inductance Per

Phase (mH)

Frame

Size (mm)

Resistance Per

Phase (Ω)

Height

(mm)

Width

(mm)

Length

(mm)

Shaft

Diameter

(mm)

Shaft

Length

(mm)

Stock no.

4.6 57 4.6 57.2 57.2 41 6.35 19 340-3711

0.9 57 0.7 57.2 57.2 55 6.35 19 340-3727

1.7 57 1.1 57.2 57.2 78.5 8 19 340-3733

2.1 86 0.55 86 86 67 9.525 28.6 340-3749

3.5 86 0.75 86 86 94 9.525 28.6 340-3755

Holding Torque (mNm) Number Of Wires Shaft Length (mm) Stock no.

50; 70 6 24 432-8267

87; 123 4 12 441-0401

Step Angle 1.8 °

Holding Torque

(mNm)

Current Per

Phase (A)

Stock no. Price

per

OM S$ S$ S$

470 1 340-3711 unit 1+ 165·50

980 3 340-3727 unit 1+ 182·00

1630 3 340-3733 unit 1+ 290·00

2800 4.3 340-3749 unit 1+ 315·00

4800 4.3 340-3755 unit 1+ 405·00

Holding Torque

(mNm)

Number Of

Wires

Stock no. Price

per

OM S$ S$ S$

50; 70 6 432-8267 unit 1+ 83·00

87; 123 4 441-0401 unit 1+ 157·00

Voltage

Rating (V

dc)

Frame

Size

Holding

Torque

(mNm)

Number

Of Wires

Height

(mm)

Width

(mm)

Length

(mm)

Shaft

Diameter

(mm)

Shaft Length (mm) Stock no.

5 17 70 6 40 40 33 5 18.1 440-420

12 17 70 6 40 40 33 5 Front 18.9 ; Rear 20 440-436

12 17 100 6 40 40 33 5 18.1 191-8299

5.1 23 500 8 56.4 56.4 50.5 6.35 18.9 440-442

12 23 500 8 56.4 56.4 50.5 6.35 Front 18.9; Rear; 20 440-458

5 23 260 8 56.4 56.4 38.5 6.35 18.5 191-8328

12 23 260 8 56.4 56.4 38.5 6.35 18.5 191-8334

12 23 494 8 56.4 56.4 50.5 6.35 18.5 191-8340

12 23 494 8 56.4 56.4 50.5 6.35 18.5 191-8356

5.4 23 882 8 56.4 56.4 76.0 6.35 18.5 191-8362

3.4 23 1200 8 56.4 56.4 101.5 6.35 18.5 191-8378

6 23 1200 8 56.4 56.4 101.5 6.35 18.5 191-8384

3 34 1200 8 82.6 82.6 62.5 9.5 Front 28.5; Rear 20 440-464

2.5 34 2200 8 82.6 82.6 94 9.5 28.5 440-470

Voltage Rating (V dc) Stock no. Price per OM S$ S$ S$

5 440-420 unit 1+ 54·00

12 440-436 unit 1+ 77·50

12 191-8299 unit 1+ 79·00

5.1 440-442 unit 1+ 116·00

12 440-458 unit 1+ 124·00

5 191-8328 unit 1+ 94·00

12 191-8334 unit 1+ 94·00

12 191-8340 unit 1+ 119·50

12 191-8356 unit 1+ 119·50

5.4 191-8362 unit 1+ 171·00

3.4 191-8378 unit 1+ 195·00

6 191-8384 unit 1+ 195·00

3 440-464 unit 1+ 230·00

2.5 440-470 unit 1+ 315·00

Accessories


per

OM S$ S$ S$

Gearbox/dc Motor Adaptor Kit ’A’ 718-931 unit 1+ 10·80


1453

www.nguyenxuong.com

Bipolar - Stepping Drives

Unipolar - Stepping Drive

7.5°+ Stepper Motors


60

OM = Order Multiple ➤ Indicates more pricing available online

High Power Stepper Motors

7.5° Unipolar Geared, StepperMotor

Slimline Bipolar Stepper MotorDrive

Compact Unipolar - Stepper Motor Drive Boards

Unipolar Eurocard StepperMotor Drive Board

Size 1 and 2 Stepper Motors

7.5° and 15° Stepper Motors

A stand alone drive board designed to drive a stepper motor in

unipolar mode.

Size 1 This motor is supplied with 175mm long colour coded

double-insulated flying leads

Size 2 Motor can be used in conjunction with the 4Nm adaptable

gearbox. See later in this section

Directly compatible with any of the RS stepper motors up to 2A

4-phase unipolar motor drive up to 2A/40Vdc per phase

Full, half and wave modes selectable

Motor speed selectable via adjustable on-board clock or

externally via logic connectors

Enable and disable inputs allow a variety of start/stop control

options to be implemented

These motors provide a higher level of torque compared with many

similar motors, up to 100% more

They may be used in either unipolar or bipolar modes

Industry standard footprint and configuration enables these motors

to replace existing ones

2 operating voltages available

Drives motors up to 40V at 3.5A

Adjustable drive current settings from 0.5 to 3.5A

Output overload protection

Synchronisation output for multi-axis systems

Full and half step drive modes

TTL & CMOS compatible control interface

Output disable input

5 & 12Vdc auxiliary outputs for external device energisation

Status LED’s for condition monitoring

Provision for assembling on-board oscillator with ramp, low and high

speed ranges

Single rail power supply for both motor drive and logic supplies

Permanent magnet four-phase hybrid stepper motors

with 7.5 or 15° step angles. The motors have 6-lead

connections and are consequently suitable for use with

either unipolar or bipolar drives.

Note: Typical gearbox backlash is 2° and this should be allowed for

when positional accuracy is critical.

A permanent magnet 5V stepper motor fitted with an ovoid

gearhead, which provides a rotational speed reduction and

increased torque output.

A unipolar stepper motor drive board intended for stand

alone operation. Although the board does not suit the RS

stepper backplane system, it is a standard Euroboard size

complete with a 32-way DIN 41612 plug connector for

plugging into any Eurocard compatible racking system. The

board can also be surface mounted if required.

Features include:

Step Angle 7.5 ° Body Diameter 21 mmVoltage Rating 12 V dc Length 21 mmPower Rating 4.5 W Shaft Diameter 2 mmHolding Torque 25 mNm Shaft Length 9.5 mm

Step Angle 7.5 °

Ideal for applications where digital control of speed and

position is required

Gearbox utilises metal gears for optimum torque transmission

Board Supply Voltage 15 → 48 V(dc) Height 35.5 mmMotor Supply Voltage 15→40 V(dc) Width 100 mmMaximum Motor Current 3.5 A Length 160 mm

Logic input/outputs TTL LS and CMOS compatible

Open drain power MOSFET phase outputs

Voltage Rating 12 V dc Body Diameter 50 mmStep Angle 7.5 °

Directly compatible with any of the RS stepper motors up

to 2A

4-phase unipolar motor drive up to 2A/ 30Vdc per phase

Full step and half step drive modes (for higher resolution,

greater performance stability and faster stepping rates)

Depth 41 mm Shaft Length 22 mmShaft Diameter 8 mm

Note: Stepper motor must have four phases and either five, six or

eight wires.

External control inputs are C-MOS and open collector TTL logic compatible

Pre-set control for setting predetermined motor phase excitation pattern

On-board 12Vdc, 50mA output for external use

Drive board and the motor can share the same dc. power supply

Provision for assembly of on-board oscillator (if external clock not available) having clock pulse

output, base speed, top speed and stop/run control inputsStock no. Price per OM S$ S$ S$

351-4574 unit 1+ 47·10

Voltage Rating 5 V dc Length 25 mmNumber Of Wires 6 Shaft Diameter 4 mmStep Angle 7.5 ° Shaft Length 20 mmBody Diameter 42 mm

Power Rating

(W)

Holding Torque

(mNm)

Body Diameter

(mm)

Length (mm) Shaft Diameter

(mm)

Shaft Length

(mm)

Stock no.

5 20 36 22 2 7.8 440-262

7.5 57 52 26 2 7.4 440-284

10 155 58 36 4 14.4 440-290

12.5 240 66 43 6 13 440-307


441-0265 unit 1+ 405·00

Size Power

Rating

(W)

Holding

Torque

(mNm)

Length

(mm)

Shaft

Diameter

(mm)

Shaft

Length

(mm)

Stock no.

1 2 10 21.5 2 7.6 332-947

2 5.3 85 33.5 4 14.5 332-953


5:1 718-852 unit 1+ 118·00

25:2 718-868 unit 1+ 118·00

25:1 718-874 unit 1+ 141·50

50:1 718-880 unit 1+ 141·50

100:1 718-896 unit 1+ 151·00

125:1 718-903 unit 1+ 151·00

500:1 718-925 unit 1+ 172·00

Gearbox

Ratio

Holding Torque

(mNm)

Stock no. Price

per

OM S$ S$ S$

25:2 536 351-4619 unit 1+ 87·50

25:1 1000 351-4625 unit 1+ 87·50

50:1 1000 351-4631 unit 1+ 87·50

125:1 1000 351-4647 unit 1+ 91·00

Size Power Rating (W) Stock no. Price per OM S$ S$ S$

1 2 332-947 unit 1+ 132·00

2 5.3 332-953 unit 1+ 157·50

Voltage Rating

(V dc)

Holding Torque

(mNm)

Stock no. Price

per

OM S$ S$ S$

12.7 20 440-262 unit 1+ 63·50

12.9 57 440-284 unit 1+ 69·50

12.5 155 440-290 unit 1+ 81·00

12.7 240 440-307 unit 1+ 104·50

Note: if motor and board are sharing the same power supply, the current capability of the supply

should be at least 2x (motor current per phase) + board current

Supplied with: User instructions

Accessories

Supplied with: User instructions

Board Supply Voltage 9 → 24 V(dc) Height 15 mmMotor Supply Voltage 9 - 40 V(dc) Width 46 mmMaximum Motor Current 2 A Length 61 mm

Board Supply Voltage 15 → 30 V(dc) Height 15 mmMotor Supply Voltage 30 V(dc) Width 100 mmMaximum Motor Current 2 A Length 168 mm


per

OM S$ S$ S$

Gearbox/dc Motor Adaptor Kit ’B’ 718-947 unit 1+ 21·00



240-7920 unit 1+ 140·50


217-3611 unit 1+ 99·00

1454

www.nguyenxuong.com

Programmable Control Boards

Spur

Stepping Linear Actuators


60


Back Plane and Power Supply

24mm Spur Gearhead Escap K24

www.rssingapore.com

Stepping Linear Actuators, ModelUBL23

Samotronic 101

Stepping Linear Actuators

The stepper drive system back plane allows the stepper drive

power supply to be readily connected to two of the bipolarstepper drive cards and the programmable 2 axiscontrol board. Connection is without the need to use a

soldering iron enabling a complete system to be constructed

in a minimum of time.

The nature of construction of the back plane and power

supply enable a very flexible single or 2 axis system to be

produced. Only the 3.5A bipolar drive board is compatible

High resolution digital linear actuators

4-phase uni-polar

Integrated leadscrew, attached to item to be positioned

Easy to use unipolar stepper drive (4 Phase)

Compact size - 55 x 40mm

Full step and half step modes

Integral internal clock, external LS-TTL frequency can be

used

Rated at 350mA per phase at 24V

Fitted with MTA 100 6 way header for motor connection

Linear stepping action

4 phase unipolar

Ideal for precise position and speed controlled linear actuation

Typical uses: dosing pumps, valves locking mechanisms, or laser

equipment

100mm flying lead with 6 way connector

High quality spur gearboxes that can be fitted to brushed

and brushless dc servo motors

Supplied with: a pinion, adaptor plate and fixing screws

for the simple assembly to the motor.

Voltage Rating 12 V(dc) Body Diameter 36 mmLinear Force 35 N Body Length 30 mmHolding Force 100 N Shaft Diameter 3.5 mmMaximum Travel 8 mm Shaft Length 21.5 mm

Stepper motor controller constant voltage drive for use with

linear stepper motor stock no. 383-1273 (or any small unipolar

motor)

Voltage Rating

(V(dc))

Power

Rating (W)

Linear

Force (N)

Holding

Force (N)

Maximum

Travel (mm)

Body

Diameter

(mm)

Body Length

(mm)

Stock no.

12 3.4 8.9 2.8 48 26.16 21.31 510-1091

5 3.4 13.3 13.9 48 26.16 21.31 510-1108

12 4.0 20.9 11.1 63.5 35.94 26.16 510-1114

12 3.5 28.1 27.8 48 26.16 36.5 454-0990

12 3.4 88 88 76.2 57.94 36.46 510-1120

12 3.5 100 111.2 61 42.01 23.4 454-1000

with the back plane. The drives can be fed with external control signals or, by the addition of the

programmable 2 axis control card a stand alone system can be produced catering for many

applications.

The whole system can be built into a standard 19in. wide by 3U high Euro Rack.

All connections are made via screw terminals to the rear of the back plane.

Suitable 19in. rack parts (as shown), that may be required for enclosing the drive systems are listed in

the Enclosures section and have to be ordered separately.

Body Size Ø 24 mm Shaft Length 5.5 mmShaft Diameter 3 mm


383-1273 unit 1+ 94·00


12 510-1091 unit 1+ 139·50

5 510-1108 unit 1+ 153·00

12 510-1114 unit 1+ 205·00

12 454-0990 unit 1+ 157·00

12 510-1120 unit 1+ 320·00

12 454-1000 unit 1+ 210·00

Board Supply Voltage 10 → 24 V(dc) Width 40 mmMaximum Motor Current 0.35 A Length 55 mm


Subrack System Card Guide 500-566 unit 10+ 2·29 150+ 2·15 500+ 2·05

Screw Pack, M2.5x6mm 500-831 bag of 100 1+ 13·90 15+ 13·10 50+ 12·60

Ratio Length (mm) Stock no. Price per OM S$ S$ S$

8:1 15.5 719-029 unit 1+ 92·50

20:1 18.5 719-035 unit 1+ 110·50

32:1 18.5 719-041 unit 1+ 110·50

128:1 18.5 719-057 unit 1+ 110·50

320:1 21.5 719-063 unit 1+ 130·00


53107 443-0102 unit 1+ 76·50

1455

www.nguyenxuong.com

motors & motor controllers - contents - công ty tnhh … components/rs...motors & motor...

Documents