mr. mark welton. most telecom infrastructure that exists today is based on standards more than 100...
TRANSCRIPT
![Page 1: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/1.jpg)
CSIS 4823Data Communications
Networking - Telecommunications
Mr. Mark Welton
![Page 2: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/2.jpg)
Most telecom infrastructure that exists today is based on standards more than 100 years old
Telecom infrastructure is often so reliable that we expect reliable phone service more than reliable Internet service or power
Telecom Infrastructure
![Page 3: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/3.jpg)
Telecommunications refers to the traditional circuit-based switching technologies primary used by voice services
data communications often refers to packet-based switching of the modern Internet
What is telecom?
![Page 4: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/4.jpg)
ACD – automatic call distribution◦ An ACD is usually found in a call center,
where calls may come in from anywhere and need to be directed to the next available operator or queued until one is available
Telecommunications Terms
![Page 5: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/5.jpg)
Add/Drop – used to describe the capability of peeling off channels from a circuit for another use
An add/drop CSU/DSU can separate ranges of channels, thus allowing a T1 to be split for both voice and data use or as two partial T1s
Telecommunications Terms
![Page 6: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/6.jpg)
analog in telecom refers to a signal that is continuous in amplitude and time, any small fluctuation of the signal is important◦ Radio waves, power waves, and sound waves are
analog◦ When you speak, you create waves of air that hit
people’s eardrums
Telecommunications Terms
![Page 7: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/7.jpg)
Digital refers to a signal that has discrete values
If you analyze a sound wave, and then assign a value to each sample of the wave at specific time intervals, you will create a digital representation of the analog wave
Telecommunications Terms
![Page 8: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/8.jpg)
Bandwidth vs. throughput A range of frequencies is called a band The width of the band is referred to as
bandwidth US FM channels run from 87.8 MHz to 107.9
MHz The bandwidth is 20MHz
Telecommunications Terms
![Page 9: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/9.jpg)
On a digital link what is referred to as bandwidth is really throughput
Throughput is the number of possible state transitions per second
This can also be referred to as the data rate The signal on the right has more bits per
second (bps) then the left (19 possible state changes vs. 6)
Telecommunications Terms
![Page 10: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/10.jpg)
BERT – Bit Error Rate Test BERT are disruptive tests run on a T1 to
validate the integrity of the circuit (looks for errors)
CO – central office◦ the first hop where phone lines go
Channel bank – a device that separates a T1 into 24 individual analog phone lines
Telecommunications Terms
![Page 11: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/11.jpg)
CSU/DSU – Channel Service Unit and Data Service Unit
The CSU is responsible for interfacing with the WAN service
The DSU is responsible fore interfacing with the data equipment, such as the router
The CSU typically has an RJ-45 connection from the demark point and the DSU has a V.35 connection to a router
In a CSU/DSU router card, the RJ-45 connection from the demark point goes to the router card and the connection on the card interfaces it to the router
Telecommunications Terms
![Page 12: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/12.jpg)
CPE – customer premises equipment Traditionally, the term was used to describe
equipment owned by a telephone service provider that resided at customer premises, but it has evolved to include equipment owned by anyone
Telecommunications Terms
![Page 13: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/13.jpg)
DACCS (pronounced dacks) – Digital Access Cross-Connect System, allows changes to the way voice channels are connected between trunks
Telecommunications Terms
![Page 14: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/14.jpg)
Demarc (pronounced dee-mark) – demarcation point where the telecom provider’s responsibilities end and the customer’s begins
What is an extended demark? Provider installed location somewhere
beyond the real demarc
Telecommunications Terms
![Page 15: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/15.jpg)
DS hierarchy – Digital Signal, describes the signaling rates of links
Telecommunications Terms
Designator Carrier Transmission rate
Voice channels
DSO N/A 64 Kbps 1
DS1 T1 1.544 Mbps 24
DS2 T2 6.312 Mbps 96
DS3 T3 44.736 Mbps 672
DS4 T4 274.176 Mbps 4,032
![Page 16: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/16.jpg)
T-carrier – the generic name of digital multiplexed carrier systems in North America◦ T stands for trunk, since they originally designed
to trunk multiple phone lines between central offices
E-carrier - The European version of digital multiplexed carrier systems
J-carrier – The Japanese version of digital multiplexed carrier systems
Telecommunications Terms
![Page 17: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/17.jpg)
SONET – synchronous optical network, fiber optic system makes use of the optical carrier levels ◦ OC1 – 51 Mbps ◦ OC3 – 155 Mbps ◦ OC12 – 622 Mbps ◦ OC48 – 2,488 Mbps
Telecommunications Terms
![Page 18: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/18.jpg)
ISDN – Integrated Services Digital Network allows for the simultaneous transmission of voice
and data Uses a separate channel for signaling (Data
channel or D-channel) and two remaining channels for content (Bearer channel or B-Channel)
Each B-Channel is capable of 64kbps or a total of 128kbps and the D-channel capable of 16kbps on a Basic Rate Interface (BRI) and 64kbps on a Primary Rate Interface (PRI)
A PRI is an ISDN T1 composed of 23 B-channels and 1 D-channel
Telecommunications Terms
![Page 19: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/19.jpg)
LATA – local access and transport area, government defined areas in which a telecom provider can provide local services
IXC – interexchange carrier providers services to local exchanges by connecting in between LATAs
LEC – local exchange carrier, provides local service within a LATA
Local loop – the last mile connection for a circuit from a telecom facility to it destination
Telecommunications Terms
![Page 20: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/20.jpg)
Latency – term used to describe the amount of time it takes for data to be processed or moved along a network
Not related to throughput, bandwidth, or speed of a link
Related to distance, speed of light, and amount of time for hardware processing
Two parts of latency – propagation delay and processing delay.
Telecommunications Terms
![Page 21: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/21.jpg)
PBX – private branch exchange, used by large organizations as a localized phone company for its ability to share a limited number of public phone lines and the ability to call any internal extension number
POTS – plain old telephone service, your traditional analog phone line
Smart jack – a device that terminates a digital circuit, the service provider can perform remote testing of a circuit with the smart jack installed
Telecommunications Terms
![Page 22: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/22.jpg)
RBOC – Regional Bell Operating Company Result of the 1984 breakup of AT&T Bell System,
into seven regional local only carriers The Telecom Deregulation Act of 1996 allowed LECs
(RBOCs) to sell local and long distance services. ◦ Bell Atlantic ◦ Southwestern Bell ◦ Nynex ◦ Pacific Bell ◦ Bell South ◦ Ameritech ◦ US West
Telecommunications Terms
![Page 23: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/23.jpg)
T1 circuits are full-duplex asynchronous circuits
Two Common types◦ Channelized T1 – voice circuit with 24 voice
channels, each channel contains is own signaling information inserted into the data stream (voice) via in-band signaling
◦ PRI – voice circuit with 24 channels, one of which is dedicated to signaling (out of band signaling), leaving 23 available voice channels
T1 Circuits
![Page 24: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/24.jpg)
two types of encoding Alternate Mark Inversion (AMI) – used for
voice only Binary Eight Zero Substitution (B8ZS) – used
for data but can be used for voice
T1 Circuits
![Page 25: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/25.jpg)
There are two “states” (zero and one) for the signal on the line
The mark state representing a one (+/-5 volts) and the space representing a zero (zero volts)
The next mark is always the opposite of the preceding mark
Robbed-bit signaling – every eighth bit is used to keep signal (always set to 1 regardless of original value)
AMI Encoding
![Page 26: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/26.jpg)
introduced to resolve the shortcomings of AMI
In voice the eighth bit 1 is not an issue because you can not hear the change
In data this would change the information Need to deal with the synchronization issue
of too many zeros in a row without changing the information
B8ZS Encoding
![Page 27: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/27.jpg)
if eight zeros in a row are detected in a signal, those eight zeros are converted to a pattern including intentional BPVs
B8ZS Encoding
![Page 28: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/28.jpg)
Sample audio 8,000 times per second Each sample is converted in to an eight-bit
value 8th bit is used for signaling (robbed-bit
signaling in AMI)
Framing
![Page 29: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/29.jpg)
In standard voice framing each eight-bit sample is relayed from each channel in order
each eight-bit sample is relayed from each channel in order
8 bits X 24 channels = 192 bits The 193rd bit is used as a framing bit It will change this bit over 12 frames using
the pattern 110111001000 12 frames are a superframe Used for voice circuits
D4/Superframe
![Page 30: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/30.jpg)
D4/Superframe
![Page 31: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/31.jpg)
D4/superframe standard is not practical for data transmission (lack error detection)
Extended Super frame (ESF) was developed to deal with this
Uses a pattern of 24 frames instead of 12◦ Frames 4, 8, 12, 16, 20, and 24 (every fourth frame)
These frames’ framing bits are filled with the pattern 001011◦ Frames 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, and 23 (every
odd-numbered frame) These frames’ framing bits are used for a new, 4,000 bps virtual
data channel. This channel is used for out-of-band communications between networking devices on the link
◦ Frames 2, 6, 10, 14, 18, and 22 (the remaining even-numbered frames) These frames’ framing bits are used to store a six-bit CRC value for
each superframe.
Extended Super Frame
![Page 32: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/32.jpg)
Loss of Signal (LOS) – no electrical pulses detected (line is dead)
Out of Frame (OOF) or Loss of Frame (LOF) – a number of frames have been received with errors (synchronization invalid between two sides)
BiPolar Violation (BPV) – two mark signals occur in sequence at the same polarity (usually caused by voltage spike on the line)
Performance Monitoring
![Page 33: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/33.jpg)
CRC6 - Cyclic Redundancy Check (six-bit) mechanism for error checking in ESF (check sum did not match)
Errored Seconds – shows the number of seconds in a 15-minute window in which errors on the line have occurred
Red Alarm – a local failure on the circuit or continuous OOF error
Yellow Alarm – remote alarm indication of problem down the line
Loopback test – loopback state allowing the sending of data over the link, data should return to sender exactly as sent
Performance Monitoring
![Page 34: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/34.jpg)
Two types of DS3◦ Channelized
672 DS0s (28 DS1s), each capable of supporting a single POTS-line phone call
Same times referred to as a “channeled T3” DS3 is not the same as a T3
◦ Clear-channel Has no channels and is used for pure data
DS3
![Page 35: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/35.jpg)
DS3 is actually a group of seven DS2s multiplexed together
Originally designed to handle phone calls Each DS1multiplied into a DS3 has its own
clocking, framing, and encoding Multiplexing them into a DS3 can not affect
this The DS3 must also have its own clocking,
framing, and encoding
DS3 Framing
![Page 36: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/36.jpg)
M13 (pronounced M-one-three, not M-thirteen) is short for Multiplexed DS1 to DS3
Requires two stages of multiplexing◦ M12 – multiplexed DS1 to DS2◦ M23 - multiplexed DS2 to DS3
DS3s were originally used to aggregate T1s
M13
![Page 37: Mr. Mark Welton. Most telecom infrastructure that exists today is based on standards more than 100 years old Telecom infrastructure is often so reliable](https://reader030.vdocuments.net/reader030/viewer/2022032705/56649dbc5503460f94aadf40/html5/thumbnails/37.jpg)
M13