mro specialties i cleaners, for...
TRANSCRIPT
MRO SPECIALTIES
MRO I CLEANERS, FOR ELECTRONICS / ELECTRICAL EQUIPMENT
Flash Point, °CFeaturesProduct
EvaporationRate
KBValue
Dielectric StrengthResidue Applications
High purity, fast air drying, fast penetrating and rapidly evaporating non chlorinated cleaner for precision equipment. Removes contaminants like oil, grease,
dirt, dust, moisture. Fully plastic safe. Does not leave any residue on
evaporation.
CS 10
Electrical & Electronics Components Cleaner
Propellant : CO2
Use for cleaning PCB's, controls, communication, electrical, electronic, aviation and industrial equipment etc …
Packaging460 ml spray575 ml spray
CS 50
Electrical Equipment & Motor Cleaner
Propellant : CO2
none fast133 none 36 Kv
Packaging575 g spray4 kg30 kg290 kg
For cleaning grease, oil and similar contaminants from heavy duty electrical equipment as motors, terminals, bus bars, insulators, transformers, switchgears, commutators
* Not for use around sensitive plastics
Fast evaporating, fast drying, non flammable, non residue, on line, heavy duty, high dielectric strength cleaner for penetrating and removing moisture, carbon, grease, oil and other contaminants.
Prevents intermittent failure of equipment due to flashovers, tracking, short circuits and corona discharges.
Non staining, non corrosive & safe on all metals.
CS 60
Electrical Equipment & Motor Cleaner
Propellant : CO2
none fast93 none 37 Kv
Packaging567 g spray 4 kg
For cleaning grease, oil and similar contaminants from heavy duty electrical equipment as motors, terminals, bus bars, insulators, transformers, switchgears, commutators
* Not for use around sensitive plastics
Fast evaporating, fast drying, non flammable, non residue, on line, heavy duty, high dielectric strength cleaner for penetrating and removing moisture, carbon, grease, oil and other contaminants.
Prevents intermittent failure of equipment due to flashovers, tracking, short circuits and corona discharges.
Non staining, non corrosive & safe on all metals.
CS 70
Heavy Duty Bearing & Parts Cleaner
Propellant : CO2
none fast130 none NA
Packaging575 g spray
Non flammable, non residue, fast evaporating, heavy duty cleaner for penetrating and removing moisture, carbon, grease and oil contaminants, wax coatings, corrosion inhibitors etc… from metal surfaces.
Bearings, valves, gears, chains, sprockets, hoists…
* Not for use around sensitive plastics.
Use for DC motor commutator cleaning, removal of carbon deposit post flashover, from bus bars, of paints or varnishes from electric motors...
* Not for use around sensitive plastics.
CS 90
Foaming Type Carbon Remover
Propellant : Non CFC
-17 (aerosol) NANA NA NA
Packaging575 ml spray
Fast acting foaming type formula for removal of carbon, paint, adhesives, lacquers and varnishes without excessive scraping or causing damage to the surfaces. Safe on metals.
Powerful cleaning action lifts off tough carbon deposits
Penetrates deep to the innermost coat to loosen tough contaminants.
-17 (aerosol) very fast31 none NA
[email protected] www.asvmultichemie.com
MRO SPECIALTIES
MRO I CLEANERS, FOR ELECTRONICS / ELECTRICAL EQUIPMENT
Flash Point, °CFeaturesProduct
EvaporationRate
KBValue
Dielectric StrengthResidue Applications
Freeze & Fault Detect
Coolant Spray
Propellant : Non CFC
Packaging330 ml spray
Enviro
Contact Cleaner,Offline
Propellant : CO2
Packaging465 ml spray580 ml spray
-17 (aerosol) very fast31 none NA High purity, non chlorinated, heavy duty cleaner designed to clean contacts, improve performance & prevent failures.
Rapidly penetrates to quickly clean and remove moisture, grease, oil, carbon, dirt, dust, oxides and other light contaminants.
Fast evaporating, leaves no residue and safe for use on plastics, metals, rubbers, metals, varnishes etc…
For cleaning contacts, controls, relays, switches, motors, connectors, generators, ignition systems, terminals, sensors, circuit breakers, plugs & sockets…
none very fastNA none NA Non flammable coolant spray for intermittent testing of electronic components.
Locates faulty components suspected of thermal intermittent failure & shorts by cold shock chilling.
Freezes up to -55 C.°
For heat shrink fitting of electrical parts during assembly and for protection of heat sensitive parts from high temperatures during soldering or desoldering processes.
Micro Dust Remover
High Pressure Duster
Propellant : Non CFC
Packaging330 ml spray
none very fastNA none NA Non-flammable, non-conductive and safe to use on all metals, plastics, rubbers, optics, glass and delicate components.
Delivers pure 100% dry, moisture free cleaning agent.
Non staining & non corrosive. Leaves no residue and blows away
microscopic dust, lint, sand, metallic oxides and other soils.
Non abrasive & non-corrosive.
For removing microscopic dust from assemblies, telecommunication equipment and optical fiber cables.
High purity formulation and moisture free cleaning agent does not scratch plastics, glass, optics, rubber or hardware and cleans contaminants quickly.
OFC
Optical Fiber Cleaner
Propellant : Non CFCPackaging500 g spray
none very fastNA none NA To remove dust in optical fibers, junction boxes, fiber glass connectors, communication equipment.
P 20
Contact Cleaner,Online, 100% Plastic Safe
Propellant: Non CFC
Packaging425 g spray
none very fast48 none 36 Kv For cleaning contacts, controls, relays, switches, motors, connectors, generators, ignition systems, terminals, sensors, circuit breakers, plugs & sockets…
Non-flammable blend of high purity, high dielectric strength cleaners designed to clean electrical contacts and switches. Non conductive, fast evaporating,
residue less, removes moisture & contaminants. Does not contain chlorinated solvents. Safe on all plastics, metals, rubbers,
insulation materials.
Non-flammable blend of high purity, high dielectric strength cleaners designed to clean electrical contacts and switches. Non conductive, fast evaporating,
residue less, removes moisture & contaminants. Does not contain chlorinated solvents. Safe on most plastics, metals, rubbers,
insulation materials.
Premium
Contact Cleaner,Online, Plastic Safe
Propellant: CO2Packaging500 g spray
none very fast56 none 31 Kv For cleaning contacts, controls, relays, switches, motors, connectors, generators, ignition systems, terminals, sensors, circuit breakers, plugs & sockets…
[email protected] www.asvmultichemie.com
MRO SPECIALTIES
Flash Point, °CFeaturesProduct
EvaporationRate
KBValue
Dielectric StrengthResidue Applications
MRO I NON CHLORINATED SOLVENT BASED, BULK
CS 35
Cleaner, Non Chlorinated Solvent based Packaging
5 liter30 liter210 liter
+61 / 144 very slow27 none 38 Kv Odorless, high flash point, heavy-duty, non chlorinated cleaner.
Rapidly penetrates through contaminants and cleans equipment fast.
For tough cleaning jobs for removal of stubborn contaminants, grease, oils, dirt and other such soils where regular grade cleaning agents fail.
For heavy duty cleaning / degreasing applications of all motors, transformers, switchgears, electrical, electromechanical, mechanical components by manual and or by soaking / dipping in tank process.Safe on metals, plastics, varnishes and similar electrical insulation materials.
CS 85
Cleaner, Non Chlorinated Solvent based
+40 / 104 slow27 none 38 Kv Odorless, heavy-duty, non chlorinated cleaner.
Rapidly penetrates through contaminants and cleans equipment fast.
For tough cleaning jobs for removal of stubborn contaminants, grease, oils, dirt and other such soils where regular grade cleaning agents fail.
For heavy duty cleaning / degreasing applications of all motors, transformers, switchgears, electrical, electromechanical, mechanical components by manual and or by soaking / dipping in tank process.Safe on metals, plastics, varnishes and similar electrical insulation materials.
Packaging5 liter30 liter210 liter
[email protected] www.asvmultichemie.com
MRO SPECIALTIES
MRO I CLEANERS, ELECTRICAL, MOISTURE DISPLACERS
Flash PointFeaturesProduct
Solubility in Water
Appearance / Odor Density
ResidualFilm Type Applications
EL 55
Electrical Grade Maintenance Spray
Propellant: CO2
Packaging500 ml spray
+91°C Negligible 0.82 g/mlthin oily For cleaning, removing moisture and protecting all contacts, controls, relays, switches, motors, connectors, generators, ignition systems, terminals, sensors, circuit breakers, transformers, switchgears, bearings, generators, gears, tuners, busbars, connectors, potentiometers, solenoids, capacitors, communication equipment.
Fast acting electrical grade lubricant, penetrant and corrosion inhibitor for improving electrical equipment performance. Forms a clear, thin, non-drying film
that penetrates deep into the minutest crevices to displace trapped moisture and leaves behind a non-conductive protective film to seal out further moisture and corrosion. Prevents electrical malfunctions such as
flashovers, electrical shorts, leakages, tracking. No silicones,or CFCs. Safe around all metals, plastics,
rubbers and other electrical insulation materials
amber liquid / mild petroleum
For removing entrapped moisture and restoring IR values from electrical and mechanical assemblies as transformers, electrical motors etc, for preventing sparking or arcing on HT / LT bus bars, for preventing flash overs, corona shorts, leakages caused due to ingress of moisture.
Ultra thin, protective, non toxic, non flammable, dielectric, inert, electrical grade corrosion inhibitor & demoisturant for displacing water, improving electrical equipment performance, moisture proofing, salvaging and protecting electrical equipment. Displaces water from wetted out
insulation due to its unique heavier than water formula that seeks water / moisture and displaces it to dry wet electrical systems by its hydrophobic, water repelling action. Improves Megohm measurements and
dielectric properties. High dielectric strength of 31Kv Use in combination with ASV CS 50 /
ASV Premium electrical cleaners.
Elecpro 200
Moisture Displacer Non flammable
Propellant: CO2
Packaging510 g spray
+200(of film)
amber liquid / solvent
Negligible thin oily > 1 g/ml
MRO I DRY FILM COATING, CONDUCTIVE
Micro fine, high purity graphite based dry film coating that air dries immediately on application to form an electrically conductive coating.
Prevents bi-metallic corrosion, arcing, improves conductivity and preserves surfaces from heat and temperatures. High lubricity graphite solid film provides a slippery film to prevent wear, friction and jamming.
1700
Graphite Conductive Coating
Packaging400 ml spray
For use in bus bars, isolator jaws, circuit breaker in 11 KV and higher voltage systems.
Product Applications
ColorTypeDrying timeTemperature limit, C°Propellant
blackpaint like liquid 5 minutes air cure+500non CFC
Features Property
[email protected] www.asvmultichemie.com
MRO SPECIALTIES
MRO I BATTERY MAINTENANCE SPRAYS
Formulated to quickly clean corrosion, acid, sulfation, dirt and moisture from battery surfaces.
It neutralizes acids on battery terminals, connectors and cases. Discharges as a heavy duty yellowish foam and turns pink up on contact with
acids. For cleaning battery terminals during regular servicing and before application
of protective coatings.
Acid resistant corrosion inhibitor for providing long term protection to battery and cable terminals from corrosion and acid sulfation.
Soft pliable, air drying waxy film for protection of battery terminals, clamps, connectors.
Translucent reddish brown color provides easy visual inspection. Safe for use on all metals, rubbers, plastics and paint finishes. Highly resistant to humidity and forms a protective waxy shield against ingress
of air and water.
ASV film type also available.Battery Terminal Coating Dry
Battery TerminalCoating Waxy Protection againstCorrosion & Sulfation
ColorPropellant
reddish brown non CFC
Product Benefits / Applications Properties Packaging
550 ml
Battery TerminalCleaner Cleaning Terminals & Acid Neutralization
ColorPropellant
yellowish foamnon CFC
550 ml
[email protected] www.asvmultichemie.com