MSA

26

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

V-Gard® Protective Caps and Hats• Polyethylene shell and your choice of suspension system• Available in either cap or hat style• Cap available in three sizes:

small (6”–71⁄8”), standard (6½”–8”) and large (7½”–8½”) • MSA V-Gard Caps and Hats meet or exceed all applicable

requirements for a Type I (top impact) helmet as outlined inboth ANSI/ISEA Z89.1 (Class E) and also as Certified to CSAZ94.1-2015 (Class E) with Fas-Trac® III suspensions. The V-GardCap has been third-party tested in reverse (ANSI) and can beworn with the brim facing backwards (suspension turnedaround and nape strap in the rear)

• V-Gard Caps and Hats are Type I helmets, designed to reducethe force of impact resulting from a blow to the top of the head.

V-Gard Hats & CapsStandard V-Gard Slotted Cap with Staz-On® Suspension 463942 White . . . . . . . . . . . . . . . . . . . . . . . . 9.50 EA 463943 Blue . . . . . . . . . . . . . . . . . . . . . . . . . 9.50 EA 463944 Yellow . . . . . . . . . . . . . . . . . . . . . . 9.50 EA 463945 Orange . . . . . . . . . . . . . . . . . . . . . . 9.50 EA 463946 Green . . . . . . . . . . . . . . . . . . . . . . . 9.50 EA 463947 Red . . . . . . . . . . . . . . . . . . . . . . . . . . 9.50 EA

Full-Brim V-Gard Non-Slotted Hat with Staz-On® Suspension 454733 White . . . . . . . . . . . . . . . . . . . . . . 14.12 EA

Standard V-Gard Slotted Cap with Fas-Trac® III Suspension 475358 White . . . . . . . . . . . . . . . . . . . . . . 15.76 EA 475359 Blue . . . . . . . . . . . . . . . . . . . . . . . . 15.76 EA 475360 Yellow . . . . . . . . . . . . . . . . . . . . . . 15.76 EA 475361 Orange . . . . . . . . . . . . . . . . . . . . . 15.76 EA 475362 Green . . . . . . . . . . . . . . . . . . . . . . 15.76 EA 475363 Red . . . . . . . . . . . . . . . . . . . . . . . . 15.76 EA 475364 Gray (Navy) . . . . . . . . . . . . . . . . . 15.76 EA

Full-Brim V-Gard Non-Slotted Hat with Fas-Trac® III Suspension 475369 White . . . . . . . . . . . . . . . . . . . . . . 21.04 EA 475368 Blue . . . . . . . . . . . . . . . . . . . . . . . . 21.04 EA 475366 Yellow . . . . . . . . . . . . . . . . . . . . . . 21.04 EA 475371 Red . . . . . . . . . . . . . . . . . . . . . . . . 21.04 EA

Full-Brim V-Gard Non-Slotted Hat with Fas-Trac® III Suspension 475367 Navy Gray . . . . . . . . . . . . . . . . . . 21.04 EA

Replacement Parts 10087218 Replacement Staz-On® Suspension for Standard V-Gard . . . . . . . . 8.37 EA 10148708 Replacement Fas-Trac® III Suspension for V-Gard, Regular . . . . . 13.56 EA

Staz-On is a four-point pinlock suspension, Fas-Trac® III is a four-point ratchet suspension.

Fas-Trac® IIIFour-PointRatchetSuspension

V-Gard Cap & Hat

HARD HATS

10148708

See pages 40–43 for HeadProtection Accessories

See pages 35 for Hard Hat Lanyards

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

272018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

OSHANOTESHazard Assessment/Selection of PPE

1910.132 d(1) & d(1)(i) The employer shall assess the workplace to determine if hazards are present, or arelikely to be present, which necessitate the use of personal protective equipment (PPE).If such hazards are present, or likely to be present, the employer shall:(Editor’s Note: Subsequent provisions specify required detailed steps to be taken bythe employer. One of these details is frequently cited and is included here as follows.)(1) Select, and have each affected employee use, the types of PPE that will protect the affected employee for the hazards identified in the hazard assessment.©OSHA Standards Digest, Construction Edition

Houston Texans Denver Broncos Kansas City Chiefs Jacksonville Jaguars New England Patriots

NFL V-Gard® Helmets• Wear them at work, at home, or even at the game• The NFL line of V-Gard Caps with the comfortable adjustable-strap, 1-Touch® suspension offers superior quality, comfort, and protection• Meets or exceeds all applicable requirements for a Type I helmet as outlined in ANSI/ISEA Z89.1-2014 (Class E) and CSA Z94.1-2015 (Class E)• Safety directors will appreciate how NFL V-Gard Caps complement a safety program and improve wearer acceptance

NFL Team Helmets . . . . . . . . . . . . . . . . . . . . . . 35.27 EA

818384 Arizona Cardinals 818385 Atlanta Falcons 818386 Baltimore Ravens 818387 Buffalo Bills818388 Carolina Panthers 818389 Chicago Bears 818390 Cincinnati Bengals 818391 Cleveland Browns818392 Dallas Cowboys 818393 Denver Broncos 818394 Detroit Lions 818395 Green Bay Packers818396 Indianapolis Colts 818397 Jacksonville Jaguars 818398 Kansas City Chiefs 818399 Miami Dolphins 818400 Minnesota Vikings 818401 New England Patriots 818402 New Orleans Saints 818403 New York Giants818404 New York Jets 818405 Oakland Raiders 818406 Philadelphia Eagles 818407 Pittsburgh Steelers818408 Los Angeles Chargers 818409 San Francisco 49ers 818410 Seattle Seahawks 10031348 Houston Texans818412 Tampa Bay Buccaneers 818413 Tennessee Titans 818414 Washington Redskins

NFL Properties, the NFL, and its Member Clubs make no express or implied claims with respect to the effectiveness and safety of these products and have not manufactured or endorsed these products in any way.

Custom Imprinted Helmets• V-Gard®, Topgard®, Thermalgard® and Skullgard® helmets are available

from MSA with your logo or slogan imprinted on them • You can select the helmet and logo colors as well as the areas to be imprinted • Single and multi-color imprinting techniques to provide a choice of up to

four colors

Image 2000 ServiceUses a custom imprinting process for reproducing photographic images on MSA’s white V-Gard hats and caps.• Uses digital files (disc or CD) or a photo for scanning, MSA can reproduce your

image on the front, back and/or sides of medium white V-Gard hats and caps • Image 2000 Service available only on a white background since the white

background ensures top-quality reproduction of your image

HARD HATS

MSA

28

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

10034031

V-Gard® 500 Vented Cap• Provides cooling vents for improved air circulation and comfort• Optional 4- or 6-point Fas-Trac® III suspension system• Lightweight design for added comfort• Lateral contours above the ear for easy integration of hearing protection• Glaregard® underbrim to reduce reflective glare• Custom printing available• Sun Shield available–extends the brim all the way around• Meets or exceeds the applicable requirements for a Type I helmet

(top impact) as outlined in ANSI/ISEA Z89.1

10034018 4-Point Fas-Trac® III Suspension, White . . . . . . . . . . . . . . . . . . . 17.47 EA 10034019 4-Point Fas-Trac® III Suspension, Blue . . . . . . . . . . . . . . . . . . . . . 17.47 EA 10034027 6-Point Fas-Trac® III Suspension, White . . . . . . . . . . . . . . . . . . . . 20.11 EA 10034031 6-Point Fas-Trac® III Suspension, Red . . . . . . . . . . . . . . . . . . . . . . 20.11 EA

Skullgard® Protective Headwear• Feature heavy-duty construction for use in steel mills and other heavy industries

where elevated temperatures are common• Meets or exceeds the applicable requirements for a Type I helmet (top impact) as

outlined in ANSI/ISEA Z89.1, Class G

475407 Natural Skullgard® Hat w/Fas-Trac® III Suspension . . . . . . . . 134.46 EA 475395 Natural Skullgard® Cap w/Fas-Trac® III Suspension . . . . . . . . 122.50 EA 475396 White Skullgard® Cap w/Fas-Trac® III Suspension . . . . . . . . . 128.35 EA 10153385 Replacement Fas-Trac® III Suspension, Regular . . . . . . . . . . . . 17.98 EA

Skullgard®

Topgard® Protective Caps and Hats• Lightweight, durable Topgard slotted Caps and non-slotted Hats are built for use by

utilities and other industries where head protection from falling objects is necessaryalong with good dielectric properties (non-conduction of electrical current)

• Limited resistance to top impact or penetration is retained through a wide range of temperatures

• Not specifically designed to protect against lateral blows from the front, side or rear • Meets or exceeds the applicable requirements for a Type I helmet (top impact) as

outlined in ANSI/ISEA Z89.1-2014 and CSA Z94.1-2015 (Class E)

475385 White Topgard® Slotted Cap w/Fas-Trac® III Suspension . . . . 36.95 EA 10153384 Replacement Fas-Trac® III Suspension, Regular . . . . . . . . . . . . . 15.20 EA

475385

HARD HATS

ADDYOURLOGO

See pages 40–43 for HeadProtection Accessories

See pages 35 for Hard Hat Lanyards

3M

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

292018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

HARD HATS

3M™ H-700 Series Hard Hat• Engineered to help provide extended comfort, head protection, balance and stability• Comfortable smooth, easy turning 4-point ratchet suspension and standard brow pad• Provides ultimate comfort and protection from small falling objects striking the top

of the hard hat• Unique top of hat design with a short brim in both a vented and non-vented version• 4-point ratchet or pinlock suspension system with height adjustment sits lower on

head to reduce pressure and increase security and delivers the balance and stabilityyou need in demanding work environments

• Accessory slots to accommodate 3M’s cap-mounted earmuffs, headgear, faceshields and welding helmets

• H-700 series hard hat (non-vented) meets the requirements of ANSI/ISEA Z89.1-2009 Type I, Class C, G and E

• H-700 vented hard hat meets the requirements of ANSI/ISEA Z89.1 Type I, Class C

H-701R White Hard Hat with Ratchet Suspension . . . . . . . . . . . . . . . . . . . . . 12.21 EA H-702R Yellow Hard Hat with Ratchet Suspension . . . . . . . . . . . . . . . . . . . . . 12.21 EA H-701V White Vented Hard Hat with Ratchet Suspension . . . . . . . . . . . . . . 13.07 EA H-702V Yellow Vented Hard Hat with Ratchet Suspension . . . . . . . . . . . . . 13.07 EA

3M™ H-800 Series Hard Hat• Comfortable suspension sits lower on head to reduce

pressure points and increase security, especially whenlooking up and bending down

• Optional Uvicator™ Sensor lets wearer know when toreplace hard hat due to UV exposure

• Made in U.S.A. with globally sourced materials• High impact resistance that wears lightweight• Optimized comfort with 3 levels of height adjustment• Smooth, easy turning ratchet suspension• Absorbent brow pad provides comfort and ventilation• Hi-Viz H-800 hard hat colors meet ANSI Z89.1-2009

High-Visibility Performance requirements• Non-vented H-800 hard hats meet ANSI/ISEA Z89.1-2009 Type I Class C, G and E requirements• Vented H-800 hard hats meet ANSI/ISEA Z89.1-2009 Type I, Class C requirements

H-801R White Full Brim Hard Hat w/Ratchet. . . . . . . . . . . . . . . . . . . . . . . . . . 17.95 EA H-802R Yellow Full Brim Hard Hat w/Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . 17.95 EA H-807R Hi-Viz Orange Full Brim Hard Hat w/Ratchet . . . . . . . . . . . . . . . . . . 17.95 EA H-801V White Vented Full Brim Hard Hat w/Ratchet . . . . . . . . . . . . . . . . . . 18.82 EA H-802V Yellow Vented Full Brim Hard Hat w/Ratchet. . . . . . . . . . . . . . . . . . 18.82 EA H-807V Hi-Viz Orange Vented Full Brim Hard Hat w/Ratchet . . . . . . . . . . 18.82 EA H-801R-UV White Full Brim Hard Hat w/Ratchet and UV . . . . . . . . . . . . . . . . . . 20.85 EA H-802R-UV Yellow Full Brim Hard Hat w/Ratchet and UV . . . . . . . . . . . . . . . . . 20.85 EA H-807R-UV Hi-Viz Orange Full Brim Hard Hat w/Ratchet and UV . . . . . . . . . . 20.85 EA H-801V-UV White Vented Full Brim Hard Hat w/Ratchet and UV . . . . . . . . . . 21.72 EA H-802V-UV Yellow Vented Full Brim Hard Hat w/Ratchet and UV . . . . . . . . . . 21.72 EA H-807V-UV Hi-Viz Orange Vented Full Brim Hard Hat w/Ratchet and UV. . . 21.72 EA

H-801R-UVwith Uvicator™

These hardhats provide limited protection only. Misuse or failure to follow warnings and User Instructions may result in serious personal injury or death. For proper use, see supervisor, or User Instructions, or call 3M PSD Technical Service in the USA at 1-800-243-4630. In Canada, call 1-800-267-4414. Bumpcaps do not provide protection against impact from falling or glancing objects nor do they protect against electrical hazards. Bumpcaps do not meet the requirements of ANSI Z89.1. When head protection is required, wear a protective hardhat or helmet that meets the requirements of ANSI Z89.1.

WARNING!

Ask about ourReflective Stripesor Custom Logo

Program

H-701R H-702V

BULLARD

30

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

33WHR

30RDR

51YLR

Model S51 Hard Hat• Lightweight (only 11 oz), low profile style is preferred by many users • Economically priced• High-density polyethylene • Rain trough for extra protection against snow, rain, and dirt• Accessory slots for additional products• ANSI/ISEA Z89.1-2014, Class E and G, Type I• 2 yr manufacturers warranty• Made in the USA• 20/case

51WHP White Hard Hat, 4-Pt Pinlock Suspension . . . . . . . . . . . . . . . . . . . . . . . . 8.34 EA 51YLR Yellow Hard Hat, 4-Pt Ratchet Suspension . . . . . . . . . . . . . . . . . . . . . . 13.23 EA 51WHR White Hard Hat, 4-Pt Ratchet Suspension . . . . . . . . . . . . . . . . . . . . . . 13.23 EA 51KBR Kentucky Blue Hard Hat, 4-Pt Ratchet Suspension . . . . . . . . . . . . . . 13.23 EA RS4PP 4-Point Suspension Pinlock Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.64 EA RS4RP 4-Point Ratchet Suspension Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.58 EA

Classic Series Hard Hats• Classic models C30 and C33 are designed for use in a variety of applications• Full profile style, workers prefer, with a wider brim• Offers superior protection from the elements • Standard 6-pt suspension, either RS6PC self-sizing or the RS6RC Flex-Gear®

ratchet suspension is complete with an absorbent, replaceable pillowed-cotton brow pad, offering superior comfort

• Vertical adjustment snaps on the front, side and rear positions of the headband allow for a customized fit

• Available in a variety of colors, Classic Series Hard Hats can be customized with your company logo in the Bullard Logo Shop with a minimum of only 20 hard hats, offering the quickest delivery in the industry

• High-density polyethylene shell• Accessory slots for attachments on cap style• Large, absorbant cotton brow pad that is replaceable• 2 yr. manufacturers warranty• Made in the USA• Both C30 and C33 meet ANSI/ISEA Z89.1-2014, Type I, Class E & G requirements

and CSA Z94.1-2015, Type I, Class E & G

C30WHP C30 White Classic Cap w/6-Point Pinlock Suspension . . . . . . . . . . . . . . 14.05 EA C30HYR C30R Hi-Viz Yellow Classic Cap w/6-Point Ratchet Suspension. . . . . . 19.46 EA C30RDR C30R Red Classic Cap w/6-Point Ratchet Suspension . . . . . . . . . . . . . . 19.46 EA C30WHR C30R White Classic Cap w/6-Point Ratchet Suspension. . . . . . . . . . . . . 19.46 EA C33WHR C33R White Classic Full Brim Cap w/6-Point Ratchet Suspension . . . 21.02 EA RS6PC Replacement 6-Point Pinlock Suspension for Classic Cap . . . . . . . . . . . . 9.30 EA RS6RC Replacement 6-Point Ratchet Suspension for Classic Cap . . . . . . . . . . 15.03 EA

HARD HATS

Classic Series C34 Hard Hat• Full, wide brim• Durable high-density polyethylene• 12% more interior space• 6-point suspension in Flex-Gear® ratchet or pinlock• Large, absorbent cotton brow pad• 1” wide nylon suspension straps• Front, side, and rear vertical height adjustment• Available in all Bullard standard colors• Striping and logos available

C34KGR Kelly Green Full Brim Hard Hat, 6-Pt Ratchet Suspension . . . . 21.39 EA C34WHR White Full Brim Hard Hat, 6-Pt Ratchet Suspension . . . . . . . . . 21.39 EA

C34WHR

ADDYOURLOGO

BULLARD

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

312018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

HARD HATS

Advent®Helmet• Head protection for rescue and emergency medical operations• Compact profile improves freedom of movement while providing impact protection

from the top, front, side and rear• Polycarbonate alloy outer shell• EPS foam impact liner and crown cushion• ABS inner shell• 8-point Flex-Gear® ratchet suspension• 2-point or 3-point chinstrap• Meets/exceeds ANSI Z89.1-2014 Type II, Class E and G requirements

A2WHS Advent A2 Helmet w/ADRTSL Suspension, . . . . . . . . . . . . . . . 152.10 EA 3-Pt Chin Strap, White

A2WHS

Classic Series C35 XL DesignHard Hat with Accessory Slots• Full, wide brim with accessory slots for face protection• Durable high-density polyethylene• 12% more interior space• 6-point self-sizing pinlock or Flex-Gear® ratchet suspension• Large, absorbent cotton brow pad• 1” wide seamless nylon straps• Vertical height adjustment• Available in all Bullard standard colors• Striping and logos available• Meets or exceeds ANSI/ISEA Z89.1, Type I, Class E & G requirements

C35WHP White Classic Full Brim Hard Hat, XL, . . . . . . . . . . . . . . . . . . . . 16.60 EA with Accessory Slots, 6-Point Pinlock

C35HYP Hi-Viz Yellow Classic Full Brim Hard Hat, XL, . . . . . . . . . . . . . 16.60 EA with Accessory Slots, 6-Point Pinlock

C35HOP Hi-Viz Orange Classic Full Brim Hard Hat, XL, . . . . . . . . . . . . 16.60 EA with Accessory Slots, 6-Point Pinlock

C35HYP

C35WHP

See pages 40–43 for HeadProtection Accessories

See pages 35 for Hard Hat Lanyards

ADDYOURLOGO

PYRAMEX

HP54110

32

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

HARD HATS

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

Ridgeline Hard Hats• The ultimate combination of high performance impact protection and exceptional

personalized comfort• Swinging hinge points allow you to find the most comfortable position on the

back of your head• Ventilation holes keep your head cool and dry for all day wear• Made from ABS material• Low profile design offers a low center of gravity for better balance• Thermoplastic resin is a lightweight material that combines strength and rigidity• Rear padded suspension provides additional level of comfort on the wearers’ neck• Vented pressure pad keeps the straps in place providing an additional level of comfort• Easy to grasp triangle knob adjusts the suspension from 6½” to 8” hat sizes• Meets ANSI Z89.1-2009 Standards, Type I, Class C, G, And E

HP44110V White Ridgeline Cap-Style Vented, 4-Point Ratchet Suspension . . . . . 11.28 EA

HP44110 White Ridgeline Cap-Style, Non-Vented, 4-Point Ratchet . . . . . . . . . . . . 10.83 EA HP44130 Yellow Ridgeline Cap-Style, Non-Vented, 4-Point Ratchet . . . . . . . . . . . 10.83 EA HP44141 Hi-Viz Orange Ridgeline Cap-Style, Non-Vented, 4-Point Ratchet . . . . 11.74 EA

HP54110 White Ridgeline Full Brim, 4-Point Ratchet. . . . . . . . . . . . . . . . . . . . . . . . . . 13.56 EA HP54130 Yellow Ridgeline Full Brim, 4-Point Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . 13.56 EA HP54141 Hi-Viz Orange Ridgeline Full Brim, 4-Point Ratchet . . . . . . . . . . . . . . . . . . 14.47 EA HP54117 Carbon Fiber Pattern Ridgeline Full Brim, 4-Point Ratchet . . . . . . . . . . . 25.03 EA

HP54117

Hard Hats• Shell constructed from high-density polyethylene• Rain trough on sides and back of helmet channel moisture away• Soft brow pad is replaceable and washable• Low profile design• Universal accessory slots fit cap mounted earmuffs and chin straps• Cap style is available with 4- and 6-point nylon suspensions• Available in 6 colors• Meets ANSI Z89.1 standards, Type I–Class C, G, and E

HP14110 White Hard Hat w/4-Point Suspension . . . . . . . . . . . . . . . . 5.50 EA HP16110 White Hard Hat w/6-Point Suspension . . . . . . . . . . . . . . . . 7.17 EA HP26110 White Full Brim Hard Hat w/6-Point Suspension. . . . . . . 9.85 EA

HP14110

NEWGraphite Pattern

HP26110

OSHANOTESHard hats

1910.135 a(1) The employer shall ensure that each affectedemployee wears a protective helmet whenworking in areas where there is a potential forinjury to the head from falling objects.©OSHA Standards Digest, Construction Edition

See pages 40–43 for HeadProtection Accessories

See pages 35 for Hard Hat Lanyards

ADDYOURLOGO

Free Safety Info all in One Place• Safety Training Videos• Safety Blog• EHS Webinars• Articles & White Papers• Infographics• Tools & Software

Your ResourceCenter for Industrial

Safety Topicswww.safeopedia.com

HONEYWELL-NORTH

HONEYWELL-FIBREMETAL

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

HARD HATS

332018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

P2HNRW01A000

E1RW01A000

E1 Hard Hats• Thermoplastic full brim hard hat with Fibre-Metal smooth crown design• The technically-advanced SuperEight® 8-point suspension balances and spreads weight

over a wide area for added comfort and impact protection• Full brim adds an extra margin of protection from harmful UV rays, rain and falling debris• Available with the famous Fibre-Metal non-slip/non-strip ratchet headgear• Available in a wide range of popular colors and full graphic designs• Meets ANSI Z89.1-2014 Type I, Class E

E1RW01A000 White SuperEight® Class E Type I . . . . . . . . . . . . . . . . . . . . . . . . 21.46 EA Thermoplastic Full Brim Hard Hat w/Ratchet Suspension

Roughneck P2 Hard Hats• P2HN provides protection in high heat environments up to 500°F• Proprietary injection-molded fiberglass compound offers exceptional impact and crack

resistance and is 8X stronger than common high-density polyethylene (HDPE) capshells

• Solid color resin provides a permanent, no-chip, no-peel finish; matte finish makes logoimprints crisper and cleaner, so your official company caps look better and last longer

• The technically-advanced SuperEight® 8-point suspension balances and spreads weightover a wide area for added comfort and impact protection

• Meets ANSI Z89.1-2014 and CSA Z94.3-2015 Type I Class G

P2HNRW01A000 White Roughneck Hard Hat w/Ratchet Suspension. . . . . . 41.86 EA

SB470

A79R090000

A79S2

A79 Hard Hats• Versatile and dependable design • Features grooved HDPE outer shell with rain trough and accessory slots• Available in pinlock or ratchet suspension 4-point nylon• 3-level height adjustment• Meets ANSI Z89.1-2014

A79010000 White Hard Hat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.10 EA A79170000 Royal Blue Hard Hat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.10 EA A79020000 Yellow Hard Hat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.10 EA A79R010000 White Hard Hat w/Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.52 EA A79R020000 Yellow Hard Hat w/Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.52 EA A79R040000 Dark Green Hard Hat w/Ratchet . . . . . . . . . . . . . . . . . . . . . . . . 11.52 EA A79R090000 Gray Hard Hat w/Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.52 EA A79R150000 Red Hard Hat w/Ratchet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.52 EA A79S2 4-Point Pin Lock Nylon Suspension for A79 . . . . . . . . . . . . . . . 3.46 EA A79RS2 4-Point Ratchet Suspension for A79R . . . . . . . . . . . . . . . . . . . . 8.85 EA SB470 Terry Cloth Sweatband w/Velcro Closure, 10/pkg . . . . . . . 28.72 PK

HONEYWELL-NORTH

PYRAMEX

BULLARD

BC86 Bump Cap• Cool and lightweight cap covers

the scalp to reduce abrasions and lacerations due to minor bumps

• Replaceable suspension and sweat band extend product life

• High-density polyethylene construction• NOT for use where compliance

with ANSI or CSA is required

BC86010000 White Bump Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.10 EA BC86020000 Yellow Bump Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.10 EA BC86040000 Dark Green Bump Cap . . . . . . . . . . . . . . . . . . . . . . . 5.10 EA BC86070000 Sky Blue Bump Cap . . . . . . . . . . . . . . . . . . . . . . . . . . 5.10 EA BC86S BC86 4-Point Pin Lock Suspension . . . . . . . . . . . . 3.39 EA

34

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

BC86070000

First Base® Bump Cap Head Protection• Setting a trend in style and head protection• Combines the style appeal of a standard cap with the safety of an HDPE inner liner• Protects against minor bumps and scrapes• Appropriate for use in a variety of environments

FBINSHELL First Base Vented Insert for Baseball Caps . . . . . . . . . . . . . . . . . . . 5.81 EA

FBINSHELL

BUMP CAPS

OSHANOTESPersonal Protective Equipment

1926.28(a) The employer is responsible for requiring thewearing of appropriate personal protectiveequipment in all operations where there is an exposure to hazardous conditions or where thispart indicates the need for using such equipmentto reduce the hazards to the employees.

©OSHA Standards Digest, Construction Edition

ADDYOURLOGO

Ridgeline Bump Caps• Stylish Ridgeline bump caps are available for applications where hard

hats are not required, but some protection from minor bumps and scalplacerations are needed

• Made of polyethylene material and are not designed to meet the safetystandards for industrial head protection

• Not designed to meet the ANSI Z89.1-2009 class C, G, & E standards forindustrial head protection

• Custom imprinting available

HP40010 White Ridgeline Bump Cap, 4-Point Glide Lock . . . . . . . . . . . . . . . 3.82 EA HP40030 Yellow Ridgeline Bump Cap, 4-Point Glide Lock . . . . . . . . . . . . . . 3.82 EA HP40040 Orange Ridgeline Bump Cap, 4-Point Glide Lock . . . . . . . . . . . . . 3.82 EA

HP40010

See pages 40–43 for HeadProtection Accessories

ERGODYNE

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

352018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

HARD HAT LANYARDS

Squids® Hard Hat LanyardsSquids® 3157 Coil Hard Hat Lanyard with Buckle Attaches to Fall Protection• Coil design reduces lanyard length and prevents snag and tangle hazards• Double lock plastic buckle attaches to fall protection• Comfortably attaches to hard hats and other headwear• Maximum safe working capacity: 2 lbs. (0.9 kg)• Third party tested using a 2:1 safety factor• Low profile durable plastic coil

19156 Coil Hard Hat Lanyard with Buckle, Black, 18” . . . . . . . . 5.46 EA 19157ERG Coil Hard Hat Lanyard with Buckle, Lime, 18” . . . . . . . . . 5.46 EA

Squids®3158 Coil Hard Hat Lanyard with Clamp Attaches Securely to Just About Anything• Coil design reduces lanyard length and prevents snag and tangle hazards• Easy release clamp attaches securely to just about anything• Comfortably attaches to hard hats and other headwear• Maximum safe working capacity: 2 lbs. (0.9 kg)• Third party tested using a 2:1 safety factor

19158ERG Coil Hard Hat Lanyard with Clamp, Black, 13” . . . . . . . . 5.46 EA 19159 Coil Hard Hat Lanyard with Clamp, Lime, 13” . . . . . . . . . 5.46 EA

Squids® 3150 Hard Hat Lanyard with Buckle• Comfortably attaches to hard hats and other headwear• Double lock plastic buckle attaches to fall protection• Comfortable high stretch elastic material• Maximum safe working capacity: 2 lbs. (0.9 kg)• Third party tested using a 2:1 safety factor

19150 Elastic Hard Hat Lanyard with Buckle, Lime . . . . . . . . . . 4.37 EA

Squids® 3155 Elastic Hard Hat Lanyard with Clamp• Comfortably attaches to hard hats and other headwear• Easy release clamp attaches securely to just about anything• Comfortable high stretch elastic material• Maximum safe working capacity: 2 lbs. (0.9 kg)• Third party tested using a 2:1 safety factor

19155 Elastic Hard Hat Lanyard with Clamp, Lime . . . . . . . . . . . 4.37 EA

19157ERG

19150

19155

19159

Hard Hat Coil Tether• Heavy-duty steel industrial clip with simple flip-up snap allows for easy

one-handed operation• 5½” tail with loop makes the Hard Hat Tether easy to attach to any hard hat• Compact design keeps the tether out of the way when not in use

1500061 Hard Hat Tether, 2 lb. Capacity, 10/pk. . . . . . . . . . . . 105.11 PK

1500061

BULLARD

PYRAMEX

36

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

HGBR

500M

100G

840P

Faceshield Visors• Bullard visor model 840P is a clear, heat formed polycarbonate• 840M is a clear flat acetate visor • Bullard visors fit all Bullard brackets• Various visor material choices for a variety of applications• Model 840M, 840ME and 840MG conforms to ANSI/ISEA Z87.1• Model 840P and 860P conforms to ANSI/ISEA Z87+, High-Impact Testing Requirements

840ME Polyester Clear Visor 8” x 15” x .040” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.68 EA 840M Acetate Clear Visor 8” x 15” x .040” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.79 EA 840MG Acetate Dark Green Visor 8” x 15” x .040” . . . . . . . . . . . . . . . . . . . . . . . . . 6.08 EA 840P Polycarbonate Clear Heat Formed Visor 8” x 15” x .040” . . . . . . . . . . . 6.84 EA 860P Polycarbonate Clear Heat Formed Visor 8” x 15” x .060” . . . . . . . . . . . 9.45 EA 8S24 Mesh Visor 8” x 15” x 24” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19.89 EA

Hard Hat Brackets• Bullard nylon brackets, 300, 300BW and 312B are formed from lightweight, durable nylon and are ideal for general duty applications• Bullard Gold Line bracket, 100G, 400 and 500M are constructed from rugged, gold anodized aluminum and is highly resistant to corrosion

and heat, and ideal for chemical handling and high-heat industrial applications• Front mounting brackets for use on Bullard cap style hard hats• Nylon and aluminum material options

100G Gold Line Aluminum Bracket for Cap Models: C30, S51, S61, S62 & Bump Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.94 EA 300B Faceshield Bracket, Dielectric Nylon for Cap Models S51, S61, S62, C30, Advent & Bump Cap . . . . . . . . . . . . . . . 12.59 EA 400 Front Mounting with Blades, Dielectric Nylon For Cap Models S51, S61, S62 & C30 . . . . . . . . . . . . . . . . . . . . . . . . . 11.59 EA 500M BRACKET Gold Line® Front Mounting Aluminum Bracket w/Accessory, Mount for Cap Models S51 & C30 . . . . . . . . . . . . . 13.12 EA 112G Aluminum Bracket for Full Brim Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.83 EA

300B

Headgear & Visors• Constructed from durable nylon, lightweight aluminum or deluxe aluminum• Universal sizing• Cap style and full brim style accommodate a variety of faceshields

HGBR Black Headgear w/Ratchet and Pivoting Action . . . . . . . . 5.92 EA HHAA Hard Hat Adapter–Aluminum . . . . . . . . . . . . . . . . . . . . . . . . . 5.84 EA HHAAW Hard Hat Adapter–Aluminum, for Full Brim Hats. . . . . . . . 8.14 EA S1010 Clear PETG Shield 8” x 15”, .040 Thick . . . . . . . . . . . . . . . . . . . 2.11 EA

HHAA

HEADGEAR & FACESHIELDS

Tritan™ Face Protection• Products made from Tritan copolyester are impact- and chemical-resistant• Reliable clarity• Stain-resistant• High-temperature resistant• Unique chemistry• Bisphenol A (BPA) free• Estrogenic Activity (EA) free

860T Tritan Clear Heat Formed Visor 8” x 15” x .060” . . . . . . . . . . . . . . . . . . . . 8.03 EA 860T

HONEYWELL-UVEX

HONEYWELL-FIBRE-METAL

HONEYWELL-NORTH

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

372018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

HEADGEAR & FACESHIELDS

S9500, S9550

Bionic® Shield• Designed for rugged jobs, the Bionic® Shield has an advanced ergonomic design

that combines superior protection and all-day comfort with easy-to-use features • New technological advances enable it to more easily stand up to airborne debris,

splash, and welding IR• Shell offers built-in chin protection and extended top-of-head coverage • Highly adjustable headgear tilts visor nearer or farther from face depending on

preference and application • Easy-to-set, ratcheting headgear locking mechanism assures comfortable, secure fit • Hard hat adapter accessory provides full protection of the head and face • Attaches quickly to most hard hats • Comfortable cell foam on back of headgear• Breathable, removable, washable headband • 100% dielectric with no metal parts• Meets ANSI Z87.1-2015 and is certified to the CSA Z94.3 standard

S8500 Bionic with Clear PC Uncoated Faceshield . . . . . . . . . . . . . . . . . . . . . 27.37 EA S8510 Bionic with Clear Anti-Fog PC Faceshield . . . . . . . . . . . . . . . . . . . . . . 41.57 EA S8550 Clear PC Replacement Faceshield, Uncoated, 10/cs . . . . . . . . . . . . . 5.97 EA

S8500

F400

Uvex Turboshield™ • Flexible head-cushioning suspension cradle provides

300% greater contact area than traditional suspensions to eliminate pressure points for all-day wear

• Simple push-button release system allows for easy visor exchange in seconds• Control knobs are large and ergonomically designed for easy adjustment –

even while wearing gloves• Breathable, removable, washable headband• Smooth-pivoting action with positive stops in raised and lowered position• Easy to raise and lower on the job• Meets ANSI Z87.1-2015 and is certified to the requirements of the CSA Z94.3 standards

S9500 Turboshield Ratchet Headgear, Black. . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.22 EA S9510 Turboshield Hard Hat Adapter*, Black . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.22 EA S9550 Clear, PC Visor, Uncoated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.43 EA S9555 Clear, PC Visor, Hardcoat/Anti-Fog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29.25 EA

* Hard Hat Adapter tested and approved for use on these hard hats: Fibre-Metal E2, P2A, P2H, SE2; North A59, A69, A79, A89; MSA V-Gard, Top Gard; Bullard C30, S51; ERB Liberty, Omega

High Performance® Faceshield Headgear• Tough, 3C ratchet suspension• Crown made of advanced, heat-resistant Noryl® material• Suspension can be removed to accommodate a range of Fibre-Metal attachment systems• Meets ANSI Z87.1 standards and certified to CSA Z94.3

F400 Faceshield w/Noryl Cap Mount Adapter w/4” Crown, Ratchet Headgear . . . . . . . 21.00 EA

Protecto-Shield® ProLok® Headgear• Allows simple, secure attachment of visors • Suitable for high-heat applications• V5N features a plastic browguard, ratchet adjustment and a padded sweatband • Meets ANSI Z87.1-2015

11380048 V5N Browguard, Ratchet Adjustment Headgear . . . . . . . . . . . 13.85 EA 11390044 Clear Propionate Replacement Visor, Molded . . . . . . . . . . . . . . . 5.70 EA 11390068 Shade 5 Propionate Replacement Visor, Molded . . . . . . . . . . . 17.69 EA

11380048,11390068

MSA

38

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

10115730

10115828

10115827

10121268

10115822

HEADGEAR & FACESHIELDS

10115844

10115836

V-Gard® Frame for Slotted MSA Caps• Stowable slot adaptors allow frames to work with or without earmuffs• Replaceable debris-control creates a tight seal between the helmet and the frame• Sliding adjustment blades allow visor to work with most half-mask respirators• Unique V-shaped channels• Fits all slotted MSA caps

10115730 V-Gard Frame for MSA Slotted Caps, w/Debris-Control . . . . . . . . . . . . . 12.10 EA

V-Gard® Visors• Wider design for improved resistance to impact and splash hazards• Nitrometer can only be used with V-Gard® retractable or standard chin protector• Meets requirements for ANSI/ISEA Z87.1-2015

10117783 Flat, Clear PC Nitrometer Visor, 7.5” x 17” x .06” . . . . . . . . . . . . . . . . . . . 6.92 EA 10115836 Contoured, Clear PC Visor, 5.5” x 17” x .04” . . . . . . . . . . . . . . . . . . . . . . . . 5.17 EA 10115837 Flat, Clear PC Visor, 8” x 17” x .04” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.17 EA 10115840 Contoured, Clear PC Visor, 8” x 17” x .06” . . . . . . . . . . . . . . . . . . . . . . . . . 6.92 EA

9.25” x 17” x .098” V-Gard® Heavy-Duty Visors• Meets requirements for ANSI/ISEA Z87.1-2015

10115844 PC, Clear, Molded Heavy-Duty Visor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.22 EA

V-Gard® Chin ProtectorsV-Gard Chin Protectors work as a system with select V-Gard Nitrometer Visors to help provide extra protection from impact and splash hazards to face and neckNote: MSA V-Gard Chin Protectors meet the requirements of ANSI/ISEA Z87.1-2015 when worn in conjunction with V-Gard Frames and V-Gard Visors

Retractable Chin Protector• 3.82” in height, when unretracted• Unique retractable plates allow greater flexibility of head movement both up

and down, as well as side-to-side• Opaque material ensures safety and standards compliance with clear, tinted,

shaded and coated V-Gard Visors

10115828 Retractable Chin Protector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.65 EA

Standard Chin Protector• Opaque material ensures safety and standards compliance with clear, tinted, shaded and

coated V-Gard Visors• Compact, lightweight design provides additional protection between chin and neck area

10115827 Standard Chin Protector, 2.86” in height . . . . . . . . . . . . . . . . . . . . . . . . . 5.17 EA

V-Gard® Universal Frame for Slotted or Non-Slotted MSA Caps• Heavy-duty, flat rubber strap allows easy and secure placement of frame on the cap• Design allows use with other personal protective equipment, such as earmuffs and

most half-mask respirators• Non-metal construction enables use in electrical applications• Unique V-shaped channels• Fits all MSA caps• Replaceable debris-control creates a tight seal between the helmet and the frame

10115822 V-Gard Universal Frame for Caps, w/Debris-Control . . . . . . . . . . . . . . . . 12.10 EA 10121268 V-Gard Universal Frame for Caps, w/o Debris-Control . . . . . . . . . . . . . . . 8.63 EA 10116627 V-Gard Universal Frame for Full Brim Caps, w/Debris-Control . . . . . . . 14.52 EA

PYRAMEX

3M

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

HEADGEAR & FACESHIELDS

392018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

82501-00000 & 82701-00000

Capstone® Shield• Indirect-vent frame provides protection against splash and dust • Soft vinyl goggle body conforms to facial contours for a very comfortable fit • High-impact resistance against flying particles • Optically correct polycarbonate lens fits over prescription glasses • Fully adjustable elastic band • Polycarbonate lenses filter out more than 99.9% of harmful UV radiation • Goggle incorporated with removable shield provides full face protection • The shield with ratchet allows user to open or close in 3 positions for adjustment;

(4) ventilation holes provide appropriate airflow• The polycarbonate shield conforms to the face offering increased impact & dust protection • Disposable tear-off visors, suitable for high dust or muddy working environment

GG504TSHIELD Capstone® Faceshield w/Clear Anti-Fog Lens Goggle . . . . . . . 19.93 EA GG504TSHIELDIR3 Capstone® Faceshield w/IR3 Anti-Fog Lens Goggle . . . . . . . . . 30.03 EA GG504TSHIELDIR5 Capstone® Faceshield w/IR5 Anti-Fog Lens Goggle . . . . . . . . . 30.03 EA GG504TSHIELD

3M™ Clear Polycarbonate Faceshield• Durable, molded general purpose polycarbonate faceshield offers

high impact face protection• Dual pivot friction adjustment for individual preference • Molded stock• Clear faceshield• 3M™ Easy-Change™ Faceshields mount quickly to 3M headgear• Meets the high impact requirements of ANSI Z87.1-2003

82701-00000 WP96 Heavy-Duty Polycarbonate Clear Window . . . . . . 7.97 EA

3M™ Universal Headgear for Hard Hat H24M• Aluminum and durable molded universal headgear materials are designed for

high-heat applications• Two position system locks shield up and out of place when not in use• Quick change system with no snaps, bands or cams offers easy window replacement• Cap-mounted headgear assembly can be used with any 3M Faceshield to help

provide face protection• Designed to fit most hard hats• Does not interfere with most cap-mounted earmuffs• Requires protective eyewear, sold separately• Meets the requirements of ANSI Z87.1-2003

82520-10000 3M™ Universal Headgear for Hard Hat H24M . . . . . . . . . . . . . . . 12.10 EA

3M, See Warning on Page 29

82520-10000

3M™ Ratchet Headgear H8A• High-strength thermoplastic crown protector provides impact resistance• With adjustable ratchet suspension, this headgear features a unique system that

allows faceshield window replacement in seconds and helps provide a precise fitand comfortable head protection

• Adjustable ratchet suspension• Five position crown strap• Meets the requirements of ANSI Z87.1-2003

82501-00000 3M™ Ratchet Headgear H8A . . . . . . . . . . . . . . . . . . . . . . . . 17.11 EA

MCR

MSA

40

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

HEADGEAR & FACESHIELDS

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

Custom Terri-Band Sweatband• Custom design fits all MSA helmets• Washable • Plastic snaps

696688 Custom Terri-Band Sweatband, 10/pkg . . . . . . . . . . . . . . 62.21 PK

Goggle RetainersHold goggles securely on cap making goggles conveniently available for immediate use

459458 Goggle Retainer for Protective Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . 15.54 EA (goggles not included)

459458

696688

ACCESSORIES

103 HEADGEAR

181542

Ratchet Headgear• Accepts most manufacturers hard hats• Accepts most universally punched faceshields• Locking cams which eliminate snaps and lower

replacement costs• Z87+, AS/NZS 1337 compliant

102 Aluminum Rim 5-System Cam Lock Headgear . . . . . . . . . . . . . 7.46 EA 103 HEADGEAR Blue Ratchet Headgear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.62 EA

Polycarbonate Visor• Provides protection against light impact hazards, small metal chips,

small particles, and sparks• 5 system hole punch — designed to fit Crews Headgear• Accepts most manufacturers’ cam lock headgear• Polycarbonate • 99.9% UV protection• Meets or exceeds ANSI Z87+

181540 Clear Polycarbonate Visor, 8” x 15½”, .040 Thick. . . . . . . . . . . . . . . . . . 2.68 EA 181541 Medium Green Polycarbonate Visor, 8” x 15½”, .040 Thick . . . . . . . . 3.91 EA 181542 Dark Green Polycarbonate Visor, 8” x 15½”, .040 Thick. . . . . . . . . . . . 3.91 EA

102

BULLARD

OCCUNOMIX

ERGODYNE

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

ACCESSORIES–Cooling

412018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

Brow Pad• Absorbent replacement brow pad• Velcro attachment• Fits all Bullard suspensions

RBPCOTTON Replacement Brow Pad . . . . . . . . . . . . . . . . . . . . . . . . . . 4.82 EA

RBPCOTTON

Terry Toppers® Sweatbands • Plush, super-absorbent terry cloth• Easily attaches to hard hat suspension with snaps

870B Beige Terry Cloth Snap On Hard Hat Sweatband . . . . . . . . . 2.00 EA 870N Navy Terry Cloth Snap On Hard Hat Sweatband . . . . . . . . . . 2.00 EA

870N

6670CT Evaporative Hard Hat Neck Shade• Keeps the sun off your neck while delivering cool comfort • Patented advanced PVA cooling technology• Simply re-wet to reactivate• Machine washable• Hook and loop suspensions allow for easy attachment to hard hat

12523 Evaporative Hard Hat Neck Shade . . . . . . . . . . . . . . . . . . . . 15.65 EA

12523

See pages 291–293 for more heat stress protection

SBX100

Cellulose Sweatband• Absorbs sweat and provides cooling relief• Just dip in cold water, squeeze out and wear• Anti-mold treated

SBX100 Sweatband, 100/pkg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.58 PK

Call for our full-line catalog as asearchable pdf.

MSA

ERGODYNE

42

HEAD

PRO

TECT

ION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

ACCESSORIES–Cooling

2018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.

N-Ferno® 6823 Wind-Proof Hinged Balaclava• Fleece with wind-protectant fabric at most vulnerable places protects

against a variety of elements• Unique hinged design• 3-panel construction with flat lock stitching for a comfortable

“made just for you” fit• Reflective accents help keep workers safe and seen• Long length• RT: Realtree Xtra® pattern

16823 Wind-Proof Hinged Balaclava, Black . . . . . . . . . . . . . . . . . . . 16.93 EA 16833 Wind-Proof Hinged Balaclava, Realtree Camo . . . . . . . . . . 23.57 EA

16823 16833

N-Ferno® 6821 Fleece Balaclava• Long length• Polyester fleece• Reflective accent• One size, Black

16821 N-Ferno® Balaclava, Black . . . . . . . . . . . . 6.01 EA

Sunshade for Hard Hats• Breathable, bright mesh fabric• Hat clips help to keep the sunshade from falling or rotating

10098031 Sunshade for Hard Hats, Orange . . . . . . . . . . . . . . . . . . . 9.30 EA with Reflective Striping

10098031

Sun Shield• 100% ultraviolet protection for the shaded areas of the face, ears, and back of neck• A “see through” Lexan® front that allows overhead visibility• A lightweight design that adds less than 3 ounces to the weight of the hard hat• Fits hat models C33, C34 and 911H

SS6 360° Sun Shield . . . . . . . . . . . . . . . . . . . . 14.87 EA

SS6

ACCESSORIES–Warming

16821

JACKSON SAFETY

14503

14501

14500

14502WinterlinersThese winterliners are made from the most technologically advanced fabrics that combine the best of performance features with a number of comfort options.

• Can be worn under caps & hats • Hook & loop fastener for a comfortable, close fit • Water-resistant material • Quilted nylon outer shell with extra-thick foam fill & poly-fleece lining • Meets 16 CFR 1610, Class 1

14502 225 Plus Winterliner, 12/pk . . . . . . . . . . . . . . . . . 3.40 EA

• Can be worn under caps & hats • Hook & loop fastener for a comfortable, close fit • Cotton twill outer shell with poly-fleece lining and spun-poly thread

14500 200 Winterliner, 12/pk . . . . . . . . . . . . . . . . . . . . . . 3.29 EA

• Ideal for cold-weather environments • Full head & neck coverage with extra-wide wrapped collar • Shoulder-length liner to accommodate tucking in jacket • Hook & loop fastener straps • 100% Cotton twill outer shell with heavy weight fleece inner shell

and Thinsulate® lining• Meets 16 CFR 1610, Class 1

14503 305 TSL Winterliner . . . . . . . . . . . . . . . . . . . . . . . . 8.83 EA

• Ideal for extreme cold-weather environments • Full head & neck coverage with extra-long nape & wraparound collar • Shoulder-length to accommodate tucking into a jacket • Cotton twill outer shell with Poly-Sherpa lining • Meets 16 CFR 1610, Class 1

14501 400 Winterliner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.50 EA

See page 305 for FlameResistant Winterliners

14494

Allsafe WindGard™ Winterliners• Give workers the protection they need against blasts of winter • Fits over hard hats to prevent wind from tunneling through the cap • Design traps warmth while allowing moisture to evaporate• Flame-retarded material available in either Red, Navy Blue

and Omaha Orange • All-wool version available in Red and Navy Blue

14494 WindGard™ Winterliner FR Navy, AA7 . . . . . . . . . . 3.09 EA 14495 WindGard™ Winterliner, FR Orange, AA7 . . . . . . . 3.09 EA 14497 WindGard™ Winterliner, FR Navy, AA9 . . . . . . . . . . 6.35 EA 16757 WindGard™ Winterliner, Red, Non-FR . . . . . . . . . . . 6.35 EA 14496 WindGard™ Winterliner, FR Red . . . . . . . . . . . . . . . . 4.44 EA

16757

14497

14496

14495

HEAD PROTECTION

HardHats

BumpCaps

Hard HatLanyards

Headgear &Faceshields

Hard HatAccessories

Accessories–Cooling

Accessories–Warming

ACCESSORIES–Warming

432018 Wise Safety Full-line Catalog www.WiseSafetyEnv.comCall for quantity pricing. Prices and specifications subject to change without notice.