msds-csp e -4037 acri 700 primer

ACRI 700 PRIMER Est. Date Sep.1996 MSDS-CSP(E)-4037 Rev. Date Feb. 3, 2003

PAGE 1/5

MATERIAL SAFETY DATA SHEET

Rev. No. 4

CSP-MSDS-01 CHUGOKU SAMHWA PAINTS Ltd.. A4(210mm297mm)

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME ACRI 700 PRIMER

PRODUCT DESCRIPTION Acrylic anti-rust primer

COMPANY NAME CHUGOKU SAMHWA PAINTS Ltd.

ADDRESS 972, Toerae-ri, Hallim-myeon, Gimhae-si, Gyeongnam, KoreaCOMPANY IDENTIFICATION

EMERGENCY TELEPHONE NUMBER 055-340-0750

2. COMPOSITION ON HAZARDOUS INGREDIENTS

Chemical Name CAS NO. Wt. (%) Remark

Acryl resin 15 25

TiO2 13463-67-7 1 10

Calcium carbonate 1317-65-3 5 10

Talc 14807-96-6 5 15

Zinc phosphate 7779-90-0 5 15

Iron oxide 1309-37-1 1 10

Xylene 1330-20-7 25 35

Solvesso No. 100 107-98-2 5 15

MIBK 108-10-1 1 10

Etc 1 - 10

3. HAZARDS IDENTIFICATION

1. EMERGENCY OVERVIEW Flammable Coating having solvent odor. May cause eye ,skin and respiratory irritation . May cause drowsiness by high vapor concentrations. This product has a mutagenicity hazard.

2. POTENTIAL HEALTH EFFECTS

1) EYE CONTACT: May cause severe eye irritation. 2) SKIN CONTACT: May cause irritation or allergic reaction by prolonged contact 3) INGESTION: Harmful , or fatal if swallowed much. 4) INHALATION : Vapor material may be rapidly absorbed through the lung.

Repeated exposure in the vapor may cause damage to liver and kidneys. Overexposure may cause central nervous system depression, including drowsiness and unconsciousness.


PAGE 2/5


Rev. No. 4


4. FIRST AID MEASURES

1. EYE CONTACT: Immediately flush with water for at least 15 minuets. It is also recommended to have medical personal check your eyes afterwards.

2. SKIN CONTACT: Remove severely contaminated clothing , immediately and Flush skin with large amounts of water until irritation subside. If irritation persists , get medical attention.

3. INHALATION : Remove to fresh air and if not breathing , give mouse to mouse resuscitation. If breathing is difficult, give oxygen. Call a physician.

4. INGESTION : Do not induce vomiting . Keep rest. Get prompt medical attention.

5. FIRE FIGHTING MEASURES

Flash Point() 24 Ignition Point() None Flammable Limits LFL(%) 0.6 Flammable Limits UFL(%) 7

1. GENERAL HAZARD Flammable Liquid; may release flammable vapors when temperatures are at or over the flash point. Toxic gases will form upon combustion.

2. FIRE FIGHTING INSTRUCTIONS Allow fire to burn out under controlled conditions or Fight fire from a safe distance, extinguishing with foam , dry chemical , carbon dioxide or dry sand. Do not use directly WATER to extinguish to avoid the danger of fire spread that may be caused by floating flammable material on the water surface.

But if possible to do without hazard, use water spray to cool fire exposed surface and isolate material from heat .

3. EXTINGUISHING MEDIA Carbon dioxide, foam , dry chemical or dry sand

4. FIRE FIGHTING EQUIPMENT Respiratory and eye protection required for fire fighting personnel. Full protective equipment(Bunker Gear) and a self-contained breathing apparatus (SCBA) should be used forall indoor fires and significant outdoor fires. For small outdoor fires, which may easily be extinguished with a portable fire extinguisher, use of an SCBA may not be required.

5. HAZARDOUS COMBUSTION PRODUCT

Smoke, fumes and oxide of carbon


PAGE 3/5


Rev. No. 4


6.ACCIDENTAL RELEASE MEASURES

1. Provide maximum ventilation. 2. Personal protection should be used. 3. Remove all sources of ignition. 4. Contain spilled liquid with sand or earth. 5. Avoid runoff into storm sewers and ditches which lead to waterways. 6. Take up spilled material with sawdust, vermiculite or other absorbent material and place in a disposal

container.

7. HANDLING AND STORAGE

1. Handling in sufficiently ventilated areas. 2. Handling in closed areas requires local ventilation. 3. Keep container closed. Loosen closure cautiously before opening. 4. Store in a cool, well ventilated place away from incompatible materials.

5. Keep away from heat, sparks and flame. Protect material from direct sunlight.

8. EXPOSURE CONTROLS AND PERSONAL PROTECTION

1. RESPIRATORY PROTECTION : In confined or poorly ventilated areas, use an approved positive pressure self-contained breathing apparatus.

2. SKIN PROTECTION : Use imperishable gloves to this material , such as made from butyl rubber .

3. EYE PROTECTION : Use safety glasses. Wearing goggles is better.

3. EXPOSURE GUIDELINE

: Confer No.11 (TOXICOLOGICAL INFORMATION)


PAGE 4/5


Rev. No. 4


9. PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE : Liquid ODOR : Solvent Smell

PH : None MELTING POINT() None BOILING POINT () : 139.1-205 SOLUBILITY : Insoluble in water VAPOR PRESSURE(20) : 1333Pa VISCOSITY(25) : 70-80 KU SPECIFIC GRAVITY(20/20) : 1.15-1.25 DENSITY(Vapor) : Heavy than air MOLECULAR WEIGHT : None Etc. :

10. STABILITY AND REACTIVITY

1. Stability(Conditions to avoid) : This product is considered stable under normal and anticipated storage and handling conditions.

But avoid open flame ,electrical equipment sparks and other sources of ignition which induce fire.

2. Incompatibility(Specific materials to avoid) : Acid and alkali which contact may cause reaction.(polymerization with heat)

11. TOXICOLOGICAL INFORMATION

CHEMICAL NAME TLV LD 50 (Mouth) LD50 (Skin) LC50 (Inhalation)

TiO2 None 24,000mg/kg.mouse 10,000mg/kg.rabbit None

Solvesso No. 100 50ppm 2460mg/kg None None

MIBK 50ppm 267mg/kg mouse 20mg/kg rabbit 23300mg/ mouseXylene 100ppm 4300mg/kg rat 1700mg/kg rat 5000ppm/4hr man

1. IRRITATION: Skin or eye irritation may be caused by prolonged or repeated contact with this material, or by overexposure of the vaporized materials.

2. CARCINOGENICITY : May be no.


PAGE 5/5


Rev. No. 4


12. ECOLOGICAL INFORMATION

This has the potential to be toxic in environments. Do not leak or waste in the environments without adequate waste disposal handling.

13. DISPOSAL CONSIDERATION

Empty containers and material (including waste thinner for cleaning and flushing of containers or application equipment ) must be disposed in accordance with government and local environmental control regulations. Do not heat or cut empty container with electric or gas torch because due to residue.

14. TRANSPORT INFORMATION

For safety of shipping : Flammable liquid (class 3.2) U.N number 1263

15. REGULATORY INFORMATION

1. Precaution control act for toxic organic solvents 2. Occupational safety and health control act 3. Fire protection act

16. OTHER INFORMATION

The information herein is given in good faith, but we cannot guarantee that these are the only hazards which exist. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.

msds-csp e -4037 acri 700 primer

Documents