msds - ultriseal radon block

M A T E R I A L S A F E T Y D A T A S H E E T

of 3

UltriSeal Radon Block

1. Product And Company IdentificationSupplier ManufacturerMar-flex Building Solutions Mar-flex Building Solutions6866 Chrisman Lane 6866 Chrisman LaneMiddletown, OH 45042 USA Middletown, OH 45042 USA

Telephone Number: 513-422-7285 Telephone Number: 513-422-7285FAX Number: 513-422-7282 FAX Number: 513-422-7282E-Mail: [email protected] E-Mail: [email protected] Site: www.mar-flex.com Web Site: www.mar-flex.com

Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone NumberChem-Trec: 1-800-424-9300 Chem-Trec: 1-800-424-9300

Issue Date: 09/24/2009

Product Name: UltriSeal Radon BlockCAS Number: Not EstablishedChemical Family: Silicic AcidMSDS Number: 141Product Code: CWUS-0001, -0005Product/Material Uses - Minimizes moisture and radon penetration through basement walls and slabs.Product Identification Text - 1 & 5 Gallon Bucket

2. Composition/Information On Ingredients

Ingredient CAS Percent OfName Number Total Weight

SILICIC ACID 1344-09-8 30 - 40

WATER 7732-18-5 0.000001 - 70

3. Hazards IdentificationPrimary Routes(s) Of Entry - Eye, Skin, Inhalation & IngestionEye Hazards - Causes eye irritation.Skin Hazards - Causes skin irritation.Ingestion Hazards - May cause irritation to mouth, esophagus and stomach.Inhalation Hazards - Spray mist irritating to respiratory system.Physical hazards: Dries to form glass film which can easily cut skin. Spilled material is very slippery.

4. First Aid MeasuresEye - Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.Skin - Immediately flush skin with plenty of water for at least 15 minutes. Get medical attention. Wash clothing beforereuse. Thoroughly clean shoes before resuse.Ingestion - If swallowed, DO NOT induce vomiting. Get medical attention immediately. If victim is fully conscious,give a cupful of water. Never give anything by mouth to an unconscious person.Inhalation - If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, giveoxygen.

5. Fire Fighting MeasuresFire And Explosion Hazards - CombustibleExtinguishing Media - This material is compatible with all extinguishing media.Fire Fighting Instructions - The following protective equipment is recommended when this material is present in the


of 3


5. Fire Fighting Measures - Continued

area of fire: chemical goggles, body covering protective clothing, chemical resistant gloves and rubber boots.

6. Accidental Release MeasuresKeep unnecessary people away. Isolate hazard area and deny entry. Do not touch or walk through spilled material.Stop leak if you can do so without risk. Prevent runoff from entering into storm sewers and ditches which lead to naturalwaterways. Isolate, dike and store discharged material possible. Use sand or earth to contain spilled material. Ifcontainment is impossible, neutralize contaminated area and flush with large amounts of water.

7. Handling And StorageHandling Precautions - Avoid contact with eyes, skin and clothing. Avoid breathing spray mist. Promptly cleanresidue from closures with cloth dampened with water. Promptly clean spills.Storage Precautions - Keep containers closed. Store in clean steel or plastic containers. Separate from acids,reactive metals and ammonium salts. Storage temperature 0 - 95 degrees C. Loading temperature 45-95 degrees C.Do not store in aluminum, fiberglass, copper, brass, zinc or galvanized containers.

8. Exposure Controls/Personal ProtectionEngineering Controls - Use with adequate ventilation. Safety shower and eyewash fountain should be within directaccess.Eye/Face Protection - Chemical splash goggles in compliance with OSHA regulations are advised; however, OSHAregulations also permit other types of safety glasses. Consult your safety representative.Skin Protection - Wear body covering protective clothing and gloves.Respiratory Protection - NIOSH/MSHA VAPOR AND DUST RESPIRATOR IS REQUIRED.

9. Physical And Chemical PropertiesAppearance - Clear to hazy, colorlessOdor - Odorless

Chemical Type: MixturePhysical State: LiquidSpecific Gravity: 1.39 (liquid only)pH Factor: 11.3Solubility: Miscible

10. Stability And ReactivityStability: Stable

Incompatible Materials - Product gels and generates heat when mixed with acid. May react with ammonium saltsresulting in evolution of ammonia gas. Flammable hydrogen gas may be produced on contact with aluminum, tin, leadand zinc.Hazardous Decomposition Products - Hydrogen

11. Toxicological InformationNo Data Available...

12. Ecological InformationNo Data Available...


of 3


13. Disposal Considerations

Avoid/prevent release to the environment. Sinks and mixes with water. High pH of this material is harmful to aquaticlife. Only water will evaporate from a spill of this material. Flush neutral liquid to sewer in accordance with applicablefederal, state and local government regulations.

14. Transport InformationNo Data Available...

15. Regulatory InformationNo Data Available...

16. Other InformationNo Data Available...

DisclaimerThe above information pertains to this product as currently formulated and is based on the information available at thistime. Addition of reducers or other additives to these products may substantially alter the composition and hazards ofthe product.

Marflex Building Solutions makes no warranties, express or implied and assumes no responsibility regarding thesuitability of this information for the user's intended purposes or for the consequences of its use. Each individual shouldmake a determination as to the suitability of the information for their particular purposes(s).

Mar-flex Building SolutionsPrinted Using MSDS Generator™ 2000

msds - ultriseal radon block

Documents