Revision Date: Dec – 2014 1/4

MATERIAL SAFETY DATA SHEET

WCIN 03011

1. Product and company

information

Trade name

Application

Company

WCIN 03011

Used in the oil field to prevent the corrosion of the

pipelines carrying the oil and water in presence of

corrosive gas, such as CO2, H2S...

Drilling Fluids and Well Services Ltd.,

Add: No.35, 30/4 Street, Ward 9, Vung Tau City,

Ba Ria-Vung Tau Province, S.R Vietnam

Phone: + 84 64 3624499

Emergency call: + 84 64 3624499 (Ext : 25)

Fax: + 84 64 3624666

Email: dmcvtb@pvdmc.com.vn

2. Hazards identification

Human health hazards –

acute.

Eye & Skin contact

Ingestion

Inhalation

Human health hazards –

chronic

May cause eye and skin irritation.

Harmful if swallowed.

Avoid breathing vapor or mist.

Avoid prolonged or repeated contact with skin. Can

cause target organ damage. Wash thoroughly after

handling.

3. Composition information on

ingredients

No potential health hazards known

4. First aid measures

Skin contact

Eye contact

Ingestion

Inhalation

Remove contaminated clothing and wash the skin

thoroughly with soap and water or a recognized

cleaner.

Wash thoroughly with clean water for 15 minutes

holding the eyelids open. Get medical attention if

irritation occurs.

Wash out mouth with water. Keep still. DO NOT

induce vomiting. Get medical attention.

If a large quantity is inhaled, move the patient into the

fresh air and keep him/her warm and still.

If breathing is irregular or has stopped, effect mouth-

Revision Date: Dec – 2014 2/4

to-mouth resuscitation and call a doctor.

5. Fire fighting measures

Extinguishing media

Basic fire fighting procedures

Specific hazards

Carbon dioxide, chemical powders, foams, and other

extinguishing gases.

Water spray is recommended to cool fire exposed

surfaces and to protect personnel. Wear self contained

breathing apparatus.

During fire, gases hazardous to health may be formed

(carbon dioxide, carbon monoxide, nitrogen oxides).

6. Accidental release measures

Personnel Precaution

Environmental precaution

Use personnel protective equipment, breathing

apparatus required only in fire situation (see Section

8).

Do not flush into surface area or sanitary sewer system.

Eliminate all ignition sources, use absorbent materials

to contain spill and prevent material from entering soil

and waterways.

7. Handling and storage

Handling precautions

Storage conditions

Avoid contact with eyes, skin and clothing. Store

separately from oxidizing materials. Handle in well-

ventilated areas.

Store in original container protected from direct

sunlight in a dry, cool and well-ventilated area, away

from incompatible materials. Keep it in a dry place.

8. Exposure controls, personal

protection

Occupation exposure limits

Personal protection

Eye protection

Skin & body protection

Respiratory protection

Exposure guidelines have not been established for this

product.

Personal protective equipment

Wear chemical splash goggles and face shield

Wear protective gloves. Nitrile gloves are

recommended. Wear apron or protective clothing in

case of splashes.

Risk of inhalation of spray mist: Use respiratory

equipment with combination filter, type A2/P2.

9. Physical, chemical properties

Appearance

Flash point

Pour Point

Density

Liquid, colorless to light yellow.

> 610C.

< 200C.

1.03 ± 0.01 g/cm3 at 25

0C.

Revision Date: Dec – 2014 3/4

Viscosity

Solubility

pH

< 1000 cSt at 200C

Soluble in water.

9 -10

10. Stability and reactivity

Stability

Hazardous decomposition

products

Materials to avoid

Stable at ambient temperature

No de-composition, if stored normally.

Avoid contact with reactive chemicals

11. Toxicological information

Acute

Skin

Eye contact

Ingestion

Negligible hazard at ambient temperature

Low order of toxicity

May cause slight eye discomfort, but will not injure

eye tissue

Minimal toxicity

12. Ecological information

Ecotoxicity & bioaccumulation

Environmental mobility

Environmental degradability

This is a preparation and environmental assessment is

based on component data and that of similar products.

Long term adverse effects to aquatic organisms are

possible if continuous exposure is maintained. This

product is not expected to be bioaccumulation.

The product is water soluble and may spread in water

systems.

The product is expected to be biodegradable.

13. Disposal considerations

Waste disposal

Dispose off according to local, state and federal

requirement.

14. Transport information

Non hazardous for all type of transportation

15. Regulatory information

Hazard label

Hazard category

None

None

16. Other information

Recommended use

This information relates specifically to the product

designated and may not be valid for the product when

used in combination with any other materials or

products or in a particular process. The information is,

to the best of our knowledge and belief, accurate and

reliable as of the date compiled. However, no

representation, warranty or guarantee is made as to its

accuracy, reliability or completeness. It is the user’s

responsibility to review this information, satisfy itself

Revision Date: Dec – 2014 4/4

Issued by

as to its suitability and completeness and pass on the

information to its employees or customers in

accordance with applicable federal, state or local

hazard communications requirement. We do not accept

responsibility for any loss or damage which may occur

from the use of this information.

Drilling Fluids & Well Services Ltd., (DMC-WS).