msi m520 (1016) kurulum rehberi
TRANSCRIPT
-
7/30/2019 MSI M520 (1016) Kurulum Rehberi
1/7
Installation Guide
Index
Overview
Step 1: Installing CPU
Step 2: Installing CPU Heat Sink and Fan Assembly
Step 3: Installing Notebook Memory
Step 4: Installing Mini PCI WLAN Card
Step 5: Installing Notebook Hard Drive (HDD)
Step 6: Installing the Battery
Step 7: Final Check
Step 8: Entering BIOS
p. 1
p. 3
p. 4
p. 5
p. 6
p. 8
p. 10
p. 10
p. 11
-
7/30/2019 MSI M520 (1016) Kurulum Rehberi
2/7
OverviewMS-1016 is shipped out as a bare bone. Some of the components are
equipped while some are not. This installation guide provides you with the
information of notebook hardware setup. Before assembling your Notebook,
please prepare for the installation tools and appropriate items. If you are not
clear about the items, please contact your dealer for more information.
Package check listOptional Hardware Devices:
HDD, Mini PCI WLAN card, CPU, Memory
Before you install your Notebook
Warning!
The peripheral devices contained herein depend on your actual system
configuration.
Third-party trademarks and names are the properties of their respective
owners.The information contained herein relevant to software and hardware are for
reference only and in accordance with actual system configuration. All
information are subject to change without notice.
Open View
1. Cover latch
2. Display Panel
3. Quick Launch Buttons and Power button
4. Status LEDs
5. Keyboard6. Touchpad
7. Stereo Speakers
Front View Rear View
Right View Left View
Bottom View1. CPU Compartment
2. Mini PCI Drive Compartment
3. Memory Compartment
4. Hard Disk Drive Compartment
5. Battery Unlock Button
6. Battery Pack
p. 1 p. 2
Ensure power is turned off and Notebook Battery is removed before you
install any hardware devices.
Use a grounded wrist strap before handling computer components such as
CPU, Memory, HDD, mini-PCI Card, etc.
Place components (CPU, Memory, HDD, mini-PCI Card, etc) on a groundedantistatic pad or on the bed that came with the components whenever the
components are separated from the Notebook.
If there are any difficulties installing hardware devices, please contact your
dealer for further information.
-
7/30/2019 MSI M520 (1016) Kurulum Rehberi
3/7
Step 2 : Installing CPU Heat Sink and Fan Assembly
2-1 a.b. Plug the CPU heat sink fan connector before positioning the heat sink and fan
assembly !! Connect the wires correctly. There is only one way to connect. DO
NOT force in !!
!! Be sure to install CPU fan connector correctly. Dont force. Diagram shown is
wrong !!
2-2Align the CPU heat sink and fan assembly in the correct direction. Hint: We
recommend you to apply the given thermal grease for better heat conductionbetween your CPU and heat sink.
2-3 Slide the head sink and fan into correct position.
Step 1 : Installing CPU
1-1 Prepare a proper size flat head screw driver. Un-screw the screw until it can not
go any further
1-2 Locate the golden cut edge on the CPUs upper right-hand corner. Then insert the
CPU into the socket. !! The CPU will only fit in the coorect orientation !!
1-3 Adjust the CPU socket by turning the screw. Make sure the CPU is properly
installed. Then press the CPU evenly by hand and turn the screw using a flat head
screw driver to lock the CPU in place. !! Please make sure the golden cut edgelocation is aligned with the notch of the CPU socket. If the CPU does not align with
the CPU socket, it will damage the CPU !!
p. 3 p. 4
a. b.
-
7/30/2019 MSI M520 (1016) Kurulum Rehberi
4/7
3-2 Push down the memory module gently until the metal-locking levers aside from the
DIMM socket 1 is fastened.
3-3 If you have more than one memory module, please align the 2nd memory module
to the DIMM socket2. !! Memory module can only fit in one direction due to the
keyed notch. Wrong orientation will cause improper installation and may damage
the memory modules or DIMM sockets !!
3-4 Push down the memory module gently until the metal-locking levers aside from the
DIMM socket 2 is fastened.
Step 4 : Installing Mini PCI WLAN Card
4-1Align the Mini PCI Card to the Mini PCI socket.
2-4 Push down carefully making sure to align the four screws to the board.
2-5 a.b.c.d. Tighten the four screws in a diagonal direction. !! Improper connection of
the CPU heat sink fan and/or without plugging the fan connector will damage the
notebook and CPU !!
Step 3 : Installing Notebook Memory
3-1Align the Memory Module to the DIMM socket 1. !! Memory module can only fit in
one direction due to the keyed notch. Wrong orientation will cause improper
installation and may damage the memory modules or DIMM sockets !!
p. 5 p. 6
a. b.
c. d.
-
7/30/2019 MSI M520 (1016) Kurulum Rehberi
5/7
Step 5 : Installing Notebook Hard Drive (HDD)
5-1 Please use the given HDD shielding tray. !! Hard Drive may not be included !!
5-2 Insert the HDD into the given HDD shielding tray. !! Improper alignment will cause
damage to the HDD and the Notebook !!
!! Be sure to install HDD correctly. You should not be able to see the circuit board.
Diagram shown is wrong !!
5-3 a.b.After sliding the shield over the HDD, slide the connecting shield to the HDD
and shield. !! Be sure to fasten the screw that are provided !!
4-2Adjust the attached antennas and push down the Mini PCI Card gently until the
metal locking levers aside from the Mini PCI socket is fastened. !! Mini PCI Card
can only fit in one direction due to the keyed notch. Wrong orientation will cause
improper installation and may damage the Mini PCI Card or Mini PCI socket !!
4-3 Connect the black wire to the main connector.
4-4After connecting the black wire, connect the gray wire to the AUX connector.
4-5 a.b. After installing the CPU, Memory, and Mini PCI Card, gently slide the cover
until it locks into position. Lock down the cover by applying 3 screws.
p. 7 p. 8
a. b.
a. b.
-
7/30/2019 MSI M520 (1016) Kurulum Rehberi
6/7
Step 6 : Installing the Battery
6-1 a.b.c. Align battery to the battery slot and push down the battery gently.
Hint: If you wish to remove the battery, make sure the battery locking mechanism
is in Unlock position
Step 7 : Installing the Battery
7-1 Check all steps and make sure to fasten all the components and screws before
powering on your notebook. !! Improper installation of any device(s) and loosen
screws may damage the notebook after powering on the notebook !!Hint: If you
are unable to power on your notebook after following the above procedure, or if
there are any other issues, please contact your local retailer or national distributor
for help.
5-4 a.b. After installing the shield, slide the HDD into the HDD bay. !! Be sure to have
HDD plastic puller face up !!
5-5 Push HDD towards the side until HDD can go no further.
5-6 a.b. After installing the HDD, gently press down the cover then slide. Lock down
the cover by applying 2 screws. !! Failure to apply 2 screws may cause HDD
assembly to fall of in notebook HDD area and will damage the HDD and notebook !!
p. 9 p. 10
a. b.
a. b.
a.
c.
b.
-
7/30/2019 MSI M520 (1016) Kurulum Rehberi
7/7
Step 8 : Entering BIOS
Before powering on the notebook, plug in notebook power adapter into the notebook.
After pressing the power button, press immediately which will take you to the
BIOS CMOS Setup Screen.
8-1Adjust proper TIME by pressing . Use or to configure SystemTime.
8-2 Under BOOT menu in the BIOS Setup Utility, press to select the first
boot device.
p. 11 p. 12
8-3 Insert a Bootable OS CD into the OSD tray.
8-4 To save/exit the BIOS Setup Screen, press Y to save/exit.
8-5 After seeing the Intel Logo, immediately press Enter in order to install OS and
follow the given setup messages.
8-6 After installing OS, insert the given Driver CD to install the appropriate drivers in
order. Hint: If you have any questions related to the BIOS Setup procedure or if
there are any other issues, please contact your local retailers or nationaldistributors for further support.