mt accesorios acero galvanizado ed4
DESCRIPTION
ÂTRANSCRIPT
116
Catálogo-Tarifa / Catalogue-Price List
Malleable galvanized iron fittings
Accesorios de hierro maleable galvanizado
Polígono Sector Camps d’en Ricard, C/ Comerç, 10 naves 4 a 9 · 08780 Pallejà · Barcelona · EspañaVentas/Sales: Tel. (+34) 93 680 49 80 · e-mail: [email protected] · 4ª EDICIÓN
32
LÍMITES TÉCNICOS:Presión de trabajo: <=1.6 Mpa (16 bar)Presión nominal: PN-16 / PN-25 (300 lbs)Rango de temperatura ambiental de trabajo: -20~+300ºc
Producto para agua potable, según norma EN 10204:1994, Calidad GJMB-350-10.
Product for drinkable water, according to norm IN 10204:1994, Quality GJMB-350-10
CARACTERÍSTICAS:Fabricado bajo norma UNE en 10242Roscas de unión de acuerdo con ISO 7/1 (DIN 2999 / BS 21)Roscas de sujeción de acuerdo con ISO 228/1Diámetro nominal dn bajo ISO 6708Dimensiones según ISO 49 & DIN 2950
UTILIZACIÓN: Para agua fría & calienteAceiteAireGasVapor
FEATURES:Manufactured under UNE en 10242Union threads according to ISO 7/1 (DIN 2999/BS 21) Fastening threads according to ISO 228/1Nominal size dn according to ISO 6708Dimensions according to ISO 49 & DIN 2950
USE:For hot & cold waterOilAirGasSteam
Características Features
Rango de Temperatura en °C
20 - 120
120-300
300
2.5
valores interpolados
2
Presión de Trabajo Max. en Mpa
TECHNICAL LIMITS:Working pressure: <=1.6 Mpa (16 bar)Nominal pressure: PN-16 / PN-25 (300 lbs)Working environment temperature range: -20~+300ºc
Temperature Range °C
20 - 120
120-300
300
2.5
interpolated values
2
Max Working Pressure Mpa
54
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
090-01510 1/2” x 3/8” 300 10 1,68090-02015 3/4” x 1/2” 160 10 1,77090-02515 1” x 1/2” 110 10 3,27090-02520 1” x 3/4” 100 10 3,68090-03215 1 1/4” x 1/2” 80 5 7,50090-03220 1 1/4” x 3/4” 70 5 7,50090-03225 1 1/4” x 1” 60 5 5,86090-04015 1 1/2” x 1/2” 60 5 8,36090-04020 1 1/2” x 3/4” 60 5 8,36090-04025 1 1/2” x 1” 40 5 8,36090-04032 1 1/2” x 1 1/4” 40 5 9,62090-05015 2” x 1/2” 40 5 14,26090-05020 2” x 3/4” 40 5 14,26090-05025 2” x 1” 30 5 14,26090-05032 2” x 1 1/4” 30 5 15,55090-05040 2” x 1 1/2” 30 5 15,55090-06540 2 1/2” x 1 1/2” 20 5 66,50090-06550 2 1/2” x 2” 20 1 66,34090-08050 3” x 2” 10 1 82,02090-08065 3” x 2 1/2” 6 1 82,02
CÓDIGO DT. !
CODO 90º REDUCIDO H/HREDUCING ELBOW 90º F/F
090R090
090-008 1/4” 400 10 1,86090-010 3/8” 250 10 1,61090-015 1/2” 250 10 1,01090-020 3/4” 140 10 1,41090-025 1” 80 10 2,19090-032 1 1/4” 40 5 4,00090-040 1 1/2” 30 5 4,69090-050 2” 20 5 7,88090-065 2 1/2” 8 1 26,77090-080 3” 6 1 40,99090-100 4” 3 1 65,54
CÓDIGO DT. !
CODO 90º H/HELBOW 90º F/F
085-015 1/2” 100 10 4,36085-020 3/4” 60 10 6,50085-025 1” 30 10 13,43
CÓDIGO DT. !
CURVA PUENTE H/HCROSSOVERS F/F
085
041-015 1/2” 200 10 4,10041-020 3/4” 120 10 4,46041-025 1” 50 10 5,90041-032 1 1/4” 40 5 10,42041-040 1 1/2” 30 5 17,39041-050 2” 15 5 24,30041-065 2 1/2” 9 1 51,99041-080 3” 5 1 65,71041-100 4” 2 1 123,06
CÓDIGO DT. !
CURVA 45º H/HBEND 45º F/F
041002
002-010 3/8” 250 10 3,00002-015 1/2” 150 10 2,92002-020 3/4” 80 10 4,64002-025 1” 40 10 6,69002-032 1 1/4” 20 5 11,97002-040 1 1/2” 15 5 15,20002-050 2” 10 5 27,22002-065 2 1/2” 5 1 62,90002-080 3” 2 1 82,79002-100 4” 1 1 142,89
CÓDIGO DT. !
CURVA 90º H/HLONG SWEEP BEND 90º F/F
001-010 3/8” 250 10 2,83001-015 1/2” 180 10 3,17001-020 3/4” 100 10 4,67001-025 1” 40 10 6,31001-032 1 1/4” 20 5 11,98001-040 1 1/2” 20 5 15,21001-050 2” 10 5 30,41001-065 2 1/2” 5 1 60,00001-080 3” 4 1 83,75001-100 4” 1 1 139,04
CÓDIGO DT. !
CURVA 90º M/HLONG SWEEP BEND 90º M/F
001
040
040-010 3/8” 300 10 3,40040-015 1/2” 200 10 2,97040-020 3/4” 120 10 4,02040-025 1” 50 10 5,91040-032 1 1/4” 40 5 9,80040-040 1 1/2” 30 5 14,99040-050 2” 15 5 23,93040-065 2 1/2” 10 1 45,04040-080 3” 5 1 64,30040-100 4” 2 1 117,07
CÓDIGO DT. !
CURVA 45º M/HBEND 45º M/F
003-015 1/2” 300 10 4,23003-020 3/4” 150 10 5,99003-025 1” 60 10 8,93003-032 1 1/4” 40 5 18,48003-040 1 1/2” 25 5 24,30003-050 2” 10 5 32,58
CÓDIGO DT. !
CURVA 90º M/MLONG SWEEP BEND 90º M/M
003
ER-1362/2009 ER-1362/2009
76
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
180-015 1/2” 100 10 4,87180-020 3/4” 70 10 7,27180-025 1” 40 10 8,80180-032 1 1/4” 20 5 12,46180-040 1 1/2” 15 5 16,79180-050 2” 10 5 26,02180-065 2 1/2” 6 1 61,73180-080 3” 5 1 71,58180-100 4” 1 1 103,19
CÓDIGO DT. !
CRUZ 90º HCROSS 90º F
180
221
221-015 1/2” 120 10 4,46221-020 3/4” 70 10 5,51221-025 1” 50 10 10,50221-040 1 1/2” 20 5 24,94
CÓDIGO DT. !
CODO 3 BOCAS HSIDE-OUTLET ELBOW F
130-02015 3/4” x 1/2” 120 10 2,18130-02515 1” x 1/2” 60 10 3,20130-02520 1” x 3/4” 60 10 3,52130-03215 1 1/4” x 1/2” 40 5 6,16130-03220 1 1/4” x 3/4” 40 5 6,79130-03225 1 1/4” x 1” 30 5 7,11130-04015 1 1/2” x 1/2” 30 5 8,45130-04020 1 1/2” x 3/4” 30 5 8,75130-04025 1 1/2” x 1” 30 5 8,45130-04032 1 1/2” x 1 1/4” 25 5 13,29130-05015 2” x 1/2” 20 5 11,57130-05020 2” x 3/4” 20 5 16,20130-05025 2” x 1” 20 5 12,24130-05032 2” x 1 1/4” 15 5 16,20130-05040 2” x 1 1/2” 15 5 18,66130-06520 2 1/2” x 3/4” 8 1 42,05130-06525 2 1/2” x 1” 8 1 42,05130-06532 2 1/2” x 1 1/4” 8 1 42,91130-06540 2 1/2” x 1 1/2” 8 1 42,91130-06550 2 1/2” x 2” 8 1 49,01130-08040 3” x 1 1/2” 5 1 59,27130-08050 3” x 2” 5 1 53,89130-08065 3” x 2 1/2” 5 1 59,27130-10050 4” x 2” 4 1 97,86130-10065 4” x 2 1/2” 4 1 97,86130-10080 4” x 3” 4 1 97,86
CÓDIGO DT. !
TE 90º REDUCIDA HREDUCING TEE 90º F
130R130
130-008 1/4” 300 10 2,70130-010 3/8” 200 10 2,24130-015 1/2” 150 10 1,41130-020 3/4” 80 10 2,08130-025 1” 50 10 3,14130-032 1 1/4” 30 5 5,82130-040 1 1/2” 20 5 7,63130-050 2” 12 3 11,52130-065 2 1/2” 8 1 39,54130-080 3” 6 1 46,38130-100 4” 3 1 83,36
CÓDIGO DT. !
TE 90º IGUAL HTEE 90º F
096-015 1/2” 100 10 6,48096-020 3/4” 60 10 8,19096-025 1” 40 10 10,91096-032 1 1/4” 30 5 20,70096-040 1 1/2” 20 5 28,70096-050 2” 12 1 42,79
CÓDIGO DT. !
CODO UNIÓN H/HUNION ELBOW F/F WITH CONICAL SEAT
096
098-015 1/2” 80 10 7,42098-020 3/4” 50 10 9,66098-025 1” 30 10 12,32098-032 1 1/4” 20 5 20,79098-040 1 1/2” 15 5 28,81098-050 2” 10 1 43,06098-065 2 1/2” 5 1 67,00
CÓDIGO DT. !
CODO UNIÓN M/HELBOW M/F WITH CONICAL SEAT
098
092-008 1/4” 700 10 2,09092-010 3/8” 500 10 1,65092-015 1/2” 250 10 1,20092-020 3/4” 140 10 1,56092-025 1” 80 10 2,60092-032 1 1/4” 55 5 4,96092-040 1 1/2” 30 5 6,70092-050 2” 16 4 9,66092-065 2 1/2” 12 1 31,04092-080 3” 8 1 46,38092-100 4” 4 1 62,32
CÓDIGO DT. !
CODO 90º M/HELBOW 90º M/F
092
120
120-015 1/2” 300 10 3,81120-020 3/4” 180 10 4,79120-025 1” 100 10 6,97120-032 1 1/4” 50 5 13,00120-040 1 1/2” 40 5 16,47120-050 2” 20 5 21,01120-065 2 1/2” 12 1 29,04120-080 3” 6 1 73,17120-100 4” 3 1 73,17
CÓDIGO DT. !
CODO 45º H/HELBOW 45º F/F
ER-1362/2009 ER-1362/2009
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
245-01510 1/2” x 3/8” 200 10 2,08245-02010 3/4” x 3/8” 250 10 3,34245-02015 3/4” x 1/2” 250 10 1,77245-02515 1” x 1/2” 130 10 3,84245-02520 1” x 3/4” 130 10 2,27245-03215 1 1/4” x 1/2” 70 5 6,93245-03220 1 1/4” x 3/4” 70 5 5,46245-03225 1 1/4” x 1” 70 5 3,97245-04020 1 1/2” x 3/4” 60 5 5,77245-04025 1 1/2” x 1” 60 5 8,32245-04032 1 1/2” x 1 1/4” 60 5 6,25245-05025 2” x 1” 30 5 8,84245-05032 2” x 1 1/4” 30 5 11,05245-05040 2” x 1 1/2” 30 5 9,98245-06540 2 1/2” x 1 1/2” 20 1 21,58245-06550 2 1/2” x 2” 20 1 21,58245-08050 3” x 2” 20 1 34,31245-08065 3” x 2 1/2” 20 1 34,31245-10080 4” x 3” 10 1 108,19
CÓDIGO DT. !
MACHÓN REDUCCIÓN M/MREDUCING NIPPLE M/M
245241
241-01008 3/8” x 1/4” 1000 10 1,58241-01508 1/2” x 1/4” 800 10 1,05241-01510 1/2” x 3/8” 800 10 1,05241-02008 3/4” x 1/4” 480 10 1,31241-02010 3/4” x 3/8” 480 10 1,31241-02015 3/4” x 1/2” 480 10 0,87241-02510 1” x 3/8” 260 10 1,82241-02515 1” x 1/2” 260 10 1,65241-02520 1” x 3/4” 260 10 1,65241-03215 1 1/4” x 1/2” 160 5 2,77241-03220 1 1/4” x 3/4” 160 5 2,73241-03225 1 1/4” x 1” 160 5 2,31241-04010 1 1/2” x 3/8” 120 5 3,59241-04015 1 1/2” x 1/2” 120 5 3,59241-04020 1 1/2” x 3/4” 120 5 3,79241-04025 1 1/2” x 1” 120 5 3,04241-04032 1 1/2” x1 1/4” 120 5 2,99241-05015 2” x 1/2” 60 5 7,73241-05020 2” x 3/4” 60 5 7,48241-05025 2” x 1” 60 5 5,66241-05032 2” x 1 1/4” 60 5 5,24241-05040 2” x 1 1/2” 60 5 5,24241-06515 2 1/2” x 1/2” 40 5 23,50241-06520 2 1/2” x 3/4” 40 5 23,50241-06525 2 1/2” x 1” 40 1 16,24241-06532 2 1/2” x 1 1/4” 40 1 16,24241-06540 2 1/2” x 1 1/2” 40 5 15,96241-06550 2 1/2” x 2” 40 5 15,21241-08025 3” x 1” 30 1 18,07241-08032 3” x 1 1/4” 30 1 18,69241-08040 3” x 1 1/2” 30 1 17,65241-08050 3” x 2” 30 1 18,95241-08065 3” x 2 1/2” 30 1 19,06241-10050 4” x 2” 18 1 32,98241-10065 4” x 2 1/2” 18 1 33,62241-10080 4” x 3” 18 1 33,62
CÓDIGO DT. !
TUERCA REDUCCIÓN M/HBUSHINGS M/F
223-015 1/2” 120 10 8,29223-020 3/4” 70 10 14,29223-025 1” 50 10 17,65
CÓDIGO DT. !
CODO 4 BOCAS HELBOW WITH 2 LATERALS F
223
240-01008 3/8” x 1/4” 600 10 1,73240-01508 1/2” x 1/4” 400 10 1,67240-01510 1/2” x 3/8” 400 10 1,67240-02010 3/4” x 3/8” 250 10 2,27240-02015 3/4” x 1/2” 240 10 1,83240-02515 1” x 1/2” 160 10 2,56240-02520 1” x 3/4” 160 10 2,37240-03215 1 1/4” x 1/2” 90 5 5,36240-03220 1 1/4” x 3/4” 90 5 4,52240-03225 1 1/4” x 1” 90 5 4,52240-04015 1 1/2” x 1/2” 80 5 7,73240-04020 1 1/2” x 3/4” 70 5 7,29240-04025 1 1/2” x 1” 60 5 5,24240-04032 1 1/2” x 1 1/4” 50 5 5,46240-05015 2” x 1/2” 50 5 10,38240-05020 2” x 3/4” 50 5 10,77240-05025 2” x 1” 50 5 10,77240-05032 2” x 1 1/4” 40 5 9,77240-05040 2” x 1 1/2” 40 5 8,51240-06515 2 1/2” x 1/2” 22 1 24,65240-06525 2 1/2” x 1” 22 1 24,62240-06532 2 1/2” x 1 1/4” 22 1 25,54240-06540 2 1/2” x 1 1/2” 22 1 28,81240-06550 2 1/2” x 2” 22 1 25,07240-08040 3” x 1 1/2” 18 1 27,17240-08050 3” x 2” 18 1 37,35240-08065 3” x 2 1/2” 18 1 37,35240-10050 4” x 2” 6 1 54,21240-10065 4” x 2 1/2” 6 1 56,61240-10080 4” x 3” 6 1 62,67
CÓDIGO DT. !
MANGUITO REDUCCIÓN H/HREDUCING SOCKET F/F
240
8 9
ER-1362/2009 ER-1362/2009
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
1110
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
301-010 3/8” 800 10 1,31301-015 1/2” 800 10 1,38301-020 3/4” 400 10 1,50301-025 1” 250 10 1,86301-032 1 1/4” 100 5 2,52301-040 1 1/2” 90 5 3,15301-050 2” 70 5 6,27301-065 2 1/2” 25 1 13,71301-080 3” 18 1 15,21301-100 4” 12 1 27,46
CÓDIGO DT. !
TAPÓN HROUND CAP F
301 312
312-010 3/8” 600 10 1,72312-015 1/2” 600 10 1,41312-020 3/4” 400 10 1,56312-025 1” 250 10 1,91312-032 1 1/4” 200 5 2,50312-040 1 1/2” 180 5 3,13312-050 2” 110 5 6,23
CÓDIGO DT. !
TUERCA HEXAGONALLOCKNUTS
290
290-008 1/4” 1000 10 1,18290-010 3/8” 1000 10 1,05290-015 1/2” 800 10 0,76290-020 3/4” 400 10 1,03290-025 1” 250 10 1,32290-032 1 1/4” 160 5 2,61290-040 1 1/2” 130 5 3,50290-050 2” 60 5 5,34290-065 2 1/2” 50 1 12,55290-080 3” 26 1 15,92290-100 4” 18 1 26,26
CÓDIGO DT. !
TAPÓN CON REBORDE MPLUG BEADED M
300-008 1/4” 800 10 1,26300-010 3/8” 800 10 1,26300-015 1/2” 600 10 1,22300-020 3/4” 400 10 1,53300-025 1” 250 10 1,94300-032 1 1/4” 100 5 3,63300-040 1 1/2” 90 5 4,23300-050 2” 70 5 6,97300-065 2 1/2” 25 1 15,81300-080 3” 18 1 17,85300-100 4” 12 1 29,85
CÓDIGO DT. !
TAPÓN HEXAGONAL HHEXAGON CAP F
300246
246-01008 3/8” x 1/4” 400 10 2,83246-01510 1/2” x 3/8” 380 10 2,73246-02010 3/4” x 3/8” 220 10 3,34246-02015 3/4” x 1/2” 220 10 2,38246-02515 1” x 1/2” 120 10 3,36246-02520 1” x 3/4” 120 10 3,36246-03215 1 1/4” x 1/2” 80 1 8,51246-03220 1 1/4” x 3/4” 80 1 6,19246-03225 1 1/4” x 1” 80 5 6,19246-04025 1 1/2” x 1” 60 5 8,47246-04032 1 1/2” x1 1/4” 60 5 10,25246-05025 2” x 1” 30 1 12,20246-05032 2” x 1 1/4” 30 1 11,02246-05040 2” x 1 1/2” 30 1 12,05
CÓDIGO DT. !
MANGUITO REDUCCIÓN H/MNIPPLE SOCKET F/M
280-008 1/4” 500 10 2,02280-010 3/8” 500 10 1,83280-015 1/2” 350 10 1,03280-020 3/4” 250 10 1,18280-025 1” 130 10 1,63280-032 1 1/4” 70 5 3,10280-040 1 1/2” 60 5 3,87280-050 2” 30 5 6,22280-065 2 1/2” 24 1 18,84280-080 3” 18 1 29,30280-100 4” 6 1 54,62
CÓDIGO DT. !
MACHÓN M/MHEXAGON NIPPLE M/M
280
270-020L 3/4” 120 10 1,56
CÓDIGO DT. !
MANGUITO H/H EXTRA LARGOSOCKET F/F EXTRA LARGE
270L
270-008 1/4” 700 10 1,50270-010 3/8” 400 10 1,50270-015 1/2” 340 10 0,99270-020 3/4” 220 10 1,22270-025 1” 120 10 1,59270-032 1 1/4” 60 5 2,90270-040 1 1/2” 50 5 3,92270-050 2” 24 1 6,28270-065 2 1/2” 22 1 21,80270-080 3” 18 1 28,30270-100 4” 6 1 57,58
CÓDIGO DT. !
MANGUITO HSOCKET F
270
ER-1362/2009 ER-1362/2009
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
1312
321-015 1/2” 80 10 10,45321-020 3/4” 60 10 11,70321-025 1” 50 10 12,87321-032 1 1/4” 40 5 16,03321-040 1 1/2” 36 4 19,15321-050 2” 24 3 22,25321-065 2 1/2” 15 1 34,09321-080 3” 10 1 40,82321-100 4” 5 1 67,22
CÓDIGO DT. !
BRIDA REDONDA CON TALADROSFLOOR FLANGE
321 340
340-010 3/8” 150 10 7,11340-015 1/2” 120 10 6,02340-020 3/4” 80 10 7,38340-025 1” 60 10 8,91340-032 1 1/4” 40 5 12,66340-040 1 1/2” 30 5 16,42340-050 2” 20 5 23,12340-065 2 1/2” 10 1 54,11340-080 3” 6 1 79,66340-100 4” 2 1 153,84
CÓDIGO DT. !
TUERCA UNIÓN H/H JUNTA CÓNICAUNION, TAPER SEAT WITH CONICAL SEAT F/F
341-008 1/4” 150 10 7,09341-010 3/8” 150 10 7,09341-015 1/2” 100 10 6,72341-020 3/4” 60 10 8,64341-025 1” 40 10 10,64341-032 1 1/4” 30 5 14,41341-040 1 1/2” 20 5 19,52341-050 2” 15 5 27,44341-065 2 1/2” 8 1 69,39341-080 3” 6 1 112,22341-100 4” 2 1 174,30
CÓDIGO DT. !
TUERCA UNIÓN M/HUNION, TAPER SEAT WITH CONICAL SEAT M/F
341 529
529-015 1/2” 360 10 2,09529-020 3/4” 220 10 3,14529-025 1” 120 10 5,37529-032 1 1/4” 80 5 4,63529-040 1 1/2” 60 5 5,60529-050 2” 30 5 8,56
CÓDIGO DT. !
MANGUITO M/HSOCKET M/F
Certificados ISO 9001: 2008 Nº ER-1362/2009
Certificados Certificates
ER-1362/2009
ER-1362/2009
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs
1514
www.bkey.net
CONTADO: Reposición o recibo a 15 días Dto. PP. 1%.APLAZADO: 60 días fecha factura plazo máximo.IVA: Se cargará el % correspondiente, según reglamentación en vigor.EMBALAJES: Incluidos.PORTES: Material situado en nuestros almacenes.PORTES PAGADOS:· CATALUÑASe concederán para pedidos superiores a 400 ! netos. Para pedidos inferiores a 400 ! se cargarán los portes en factura aplicando la tarifa reducida especial de nuestra Agencia de Transportes.· MELILLASe concederán para pedidos superiores a 1200 ! netos. Para pedidos inferiores a 1200 ! se cargarán los portes en factura aplicando la tarifa reducida especial de nuestra Agencia de Transportes.· ISLAS CANARIASSe concederán para pedidos superiores a 800 ! netos. Para pedidos inferiores a 800 ! se cargarán los portes en factura aplicando la tarifa reducida especial de nuestra Agencia de Transportes.· RESTO PENÍNSULASe concederán para pedidos superiores a 600 ! netos. Para pedidos inferiores a 600 ! se cargarán los portes en factura aplicando la tarifa reducida especial de nuestra Agencia de Transportes.PEDIDOS MÍNIMOS ACEPTABLES: 150 !.CANTIDADES MÍNIMAS: Las cantidades mínimas aceptables corresponderán a las del embalaje interior.RECLAMACIONES: Las eventuales reclamaciones, así como defectos de fabricación, deberán formularse dentro de los 15 días siguientes al de recepción de la mercancía por el comprador, rechazándose las efectuadas después de dicho plazo límite. No se aceptará ninguna devolución de material sin antes existir la conformidad expresa mediante el número de boletín de devolución facilitado por nuestro Departamento Comercial. Todas las devoluciones serán a portes pagados.GARANTÍA: Todos los productos tienen 2 años de garantía. Queda limitada pura y simplemente al reemplazo de las piezas, reconocidas materialmente defectuosas por el personal técnico sin indemnización. No admitiremos ninguna reclamación transcurridos 30 días desde su expedición. LITÍGIOS: En caso de litigio ambas partes aceptan someter sus diferencias a los Juzgados y Tribunales de Barcelona. Business
MT Business Key S.L. se reserva la facultad de cambiar en todo o en parte el diseño y materiales de cualquiera de sus productos.
CONDICIONES GENERALES
CASH: Check or banking receipt at 15 days. For advance payments discount 1%.
CREDIT: Max. 60 days invoice date
PACKING: Included
FREIGHT: Exworks. Material to be collected in our warehouse.
FREIGHT PAID: The freight will be granted for orders above 1.500! (Islands not included). For less amount orders freight cost will be invoiced according to our transport agency prices.
MINIMUM ORDER AMOUNT: 500 !.
MINIMUN QUANTITIES: The minimum acceptable quantities will be equal to inner packing quantities. No material return will be accepted without the conformity of the Commercial Department. All material return will be at freight paid.
GUARANTEE: All products have 2 years warranty. Limited to the replacement of the pieces accepted by our technical personal as defective. No indemnification will be given. We will not accept any claim after 30 delivery date.
LIGATIONS: In case of litigation both sides agree to take their differences at the Courts of Barcelona.
MT Business Key S.L. reserves the right to modify all or part of the desing & materials of any of their products.
GENERAL SALES CONDITIONS FOR EUROPE (SPAIN EXCLUDED)
ER-1362/2009
Acce
sorio
s de
hier
ro
male
able
galva
nizad
oM
alle
able
gal
vani
zed
iron
fittin
gs