mt-cnc hardware and software identification
TRANSCRIPT
MT-CNCHardware and Software
Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Customer Information
mannesmannRexroth
engineering
Indramat283134
About this Document Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
MT-CNC Hardware and software identification
Customer Information
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
• Material number 283134
• Drawing number 120-1600-B304-02/EN
This document describes the process of identifying the hardware,software and firmware of an MT-CNC and its peripherals.
Documentation identificationof previous releases
Releasedate
Comment
109-1041-4142-01/EN 12.98 First issue
120-1600-B304-02/EN 03.99 Supplement: SOTfirmware
INDRAMAT GmbH, 1999
Copying this document and giving it to others and the use orcommunication of the contents thereof without express authority areforbidden. Offenders are liable for the payment of damages. All rights arereserved in the event of the grant of a patent or the registration if a utilitymodel or design. (DIN 34-1)
All rights are reserved with respect to the content of this documentationand the availability of the product.
INDRAMAT GmbH • Bgm.-Dr.-Nebel-Str. 2 • D-97816 Lohr a. Main
Phone 09352/40-0 • Tx 689421 • Fax 09352/40-4885
Dept. ESM (JA)
This document is printed on paper bleached without chlorine.
Title
Type of document
Document code
Internal file reference
Purpose of the document
Configuration control
Copyright
Validity
Published by
Note
Hardware and Software Identification Contents I
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Contents
1 Introduction 1-11.1 Purpose of this Document.................................................................................................................... 1-1
1.2 Additional Information .......................................................................................................................... 1-1
2 Hardware 2-1
3 Software 3-13.1 Version and Serial Number in the GUI................................................................................................. 3-1
3.2 Changing from GUI to MUI .................................................................................................................. 3-1
4 Firmware 4-14.1 General ................................................................................................................................................ 4-1
4.2 Rating Plate.......................................................................................................................................... 4-1
4.3 Firmware Version................................................................................................................................. 4-1
4.4 SOT Firmware Version ........................................................................................................................ 4-2
5 Interpretation 5-15.1 General ................................................................................................................................................ 5-1
5.2 Version 13............................................................................................................................................ 5-2
Software release versions............................................................................................................. 5-2
Firmware release versions ............................................................................................................ 5-3
5.3 Version 14............................................................................................................................................ 5-4
Software release versions............................................................................................................. 5-4
Firmware release versions ............................................................................................................ 5-5
5.4 Version 15............................................................................................................................................ 5-6
Software release versions............................................................................................................. 5-6
Firmware release versions ............................................................................................................ 5-7
5.5 Version 16............................................................................................................................................ 5-8
Software release versions............................................................................................................. 5-8
5.6 Version 17.......................................................................................................................................... 5-10
Software release versions........................................................................................................... 5-10
5.7 Version 18.......................................................................................................................................... 5-11
Software release versions........................................................................................................... 5-11
5.8 Example ............................................................................................................................................. 5-12
6 Firmware and Software Ordering Procedure 6-1
II Contents Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Hardware and Software Identification Introduction 1-1
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
1 Introduction
1.1 Purpose of this Document
This document describes the procedure that is required for locating thehardware and software of an MT-CNC and for determining its version.
Using this document, a user should be able to identify the hardware andsoftware products in a given system. This information should make itpossible to check whether the components are fit for the millenniumchange and whether or not a hardware or software update is necessary.
1.2 Additional Information
In addition to these Identification Instructions, you can find additionalinformation in the Internet and in the following document:
This document informs you of the procedure of replacing the software andfirmware, if this becomes necessary. It can be ordered under
DOK-MT*CNC-FW*SW*UPDAT-INF1-DE-P mat. no. 282 984
The current product information can be found on our Internet pagewww.indramat.de.
MT-CNC Firmware and SoftwareUpdate
Internet
1-2 Introduction Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Hardware and Software Identification Hardware 2-1
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
2 HardwareIn order to be able to assess whether or not a hardware modification isreally necessary, you must first unmistakably identify the hardware. Thisidentification must include all system components.
An unequivocal allocation of the hardware requires device type andserial number to be known.
The following elements can be used for identifying the hardware:
• The rating plates attached to the hardware
• The ordering document (only to a certain extent)
There is a rating plate on each delivered Indramat product. In most cases,it can be found at the rear or, with inbuilt components, inside the unit. Therating plate of the MT-CNC controller is on the enclosure and can be seenfrom the front (Fig. 2-1).
MT-CNC.TIF
Figure 2-1: Rating plate on the MT-CNC enclosure
The rating plate lists the data that is important for identifying the product.
• Device type
• Production week
• Serial number
• Material number
• Modification index
An additional machine-recognizable bar code is also printed onto therating plate.
Rating plate
2-2 Hardware Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
MTC02.4-C03-L1*-P02-A2-A2-L1-FW267827 K16/96
SN267827-01556 A00
production week
modification index
device typematerial number
serial number
TYPENSCH.FH7
Figure 2-2: Typical rating plate
When the rating plate is missing, you may as well use the orderingdocuments for a rough identification.
In this case, you must always take into account any modification of theunit or system that has been performed in the meantime.
Note: Using the ordering documents for identifying a unit is not veryreliable. This should only be done if a rating plate cannot befound.
Establish the installed peripherals of each controller and determine thedevice type of each unit.
Ordering documents
Device type
Hardware and Software Identification Software 3-1
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
3 Software
3.1 Version and Serial Number in the GUI
The version of the installed software can be interrogated via GUI or viaMUI.
The GUI can be started automatically by adding a call parameter in thestart file of the control system. If the control is in the MUI after the start,the call parameter has been deleted in the start file or the software doesnot have the GUI. You can recognize whether the software does not havethe GUI if the MUI menu item 10 "Graphical Interface" is missing. In thiscase you find the version information in the MUI, which is described inchapter 3.2.
Note: The majority of the keyboard entries described below require aBTV with a full keyboard or an external PC keyboard to beavailable.
When the control system is started, a status message is displayed thatshows software version and serial number. Press the <Pause/Untbr>key to stop the system and to copy the displayed data.
B05e.PCX
Figure 3-3: Version data upon system start
3.2 Changing from GUI to MUI
To interrogate the software version via the MUI, you must change fromthe GUI to the MUI. This is done in the GUI main menu.
Note: Depending on the connected BTV, you must press either the<F8> function key or the <F7> function key.
• Press the <F10> function key to get to the main menu.
⇒ This displays the „Main menu“ softkey bar.
• Press the <F8> function key "commissioning".
⇒ This displays the „Commissioning“ softkey bar.
Control without GUI
Version upon system start
3-2 Software Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Press the <F8> function key "MUI"⇒ This displays the MUI main menu.
B01e.PCX
Figure 3-4: The MUI main menu
Use the key combination <Alt>+<V> within the MUI to display the versionof the installed software. Press <Esc> to close the information window.
B02e.PCX
Figure 3-5: Displaying the MUI version
Versions in the MUI
Hardware and Software Identification Firmware 4-1
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
4 Firmware
4.1 General
Some versions require the firmware to be replaced.
A firmware update is only required for the versions 13VRS through15V08.
Note: Firmware update is not necessary for the versions 15V09through 18VRS.This is not valid for the SOT firmware. Please refer to chapter5.1, General, SOT Firmware, for further information whatversion of the SOT firmware is to be replaced.
4.2 Rating Plate
A rating plate on the unit documents the version of the installedfirmware. Sometimes, a rating plate is not replaced after an update.Thus, you should always read the version through the software.
4.3 Firmware Version
Information about the installed firmware can be obtained from the MUImenu "NC status and diagnoses".
Open the "NC status and diagnoses" menu from the MUI main menu.
• Select the "NC status and diagnoses" menu item.
⇒ This displays a list of the installed controllers.
B04e.PCX
Figure 4-6: Status and fault diagnoses
• Press the key combination <Ctrl>+<F1>.
4-2 Firmware Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
⇒ This displays an overview of the hardware installed in the system andthe related firmware.
Figure 4-7 shows a typical configuration.
B03e.PCX
Figure 4-7: Firmware version
4.4 SOT Firmware Version
The SOT firmware version is displayed on the bottom line of the mainmenu.
Figure 4-8 shows an SOT main menu.
B06e.TIF
Figure 4-8: SOT main menu
Hardware and Software Identification Interpretation 5-1
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
5 Interpretation
5.1 General
Once you have located and identified the hardware and software in yourcontroller, use the gained information in the lists on the following pages todetermine whether or not your software and/or firmware needs upgrading.
The user interface software must be upgraded for the following versions:
13V00 through 13V05
14V00 through 14V04
15V00 through 15V13
16V00 through 16V09
17V00 through 17V03
18V00 through 18V03
Upgrading to the current version is possible from any version.
Use the tables on the following pages (software release versions) todetermine whether there have been any changes compared to theprevious version. Fields with a gray background identify release versionsthat include software changes with respect to the previous version.
Basically, there are no problems in the firmware with respect to themillennium change. Since there is an interdependency between thesoftware and the firmware of previous versions, some softwarereplacements also require the firmware to be replaced.
This affects the following firmware versions:
13V00 through 13V05
14V00 through 14V04
15V00 through 15V08
Use the tables on the following pages (firmware release versions) todetermine whether there have been any changes compared to theprevious version. Fields with a gray background identify release versionsthat include firmware changes in the individual units with respect to theprevious version.
The SOT firmware must be replaced for the following versions:
from 13V00 to 13V04
from 14V00 to 14V10
from 15V00 to 15V06
from 16V00 to 16V03
from 17V00 to 17V01
The firmware versions 13V05, 14V11, 15V07, 16V04, 17V02, 18V00 donot have to be replaced.
Software
Firmware
SOT Firmware
5-2 Interpretation Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
5.2 Version 13
Software release versions
Release 13V01a 13V01b 13V01c 13V01d 13V02 13V02a 13V03 13V03a
List no. FW-13- - - - - - - - -
Date 16.05.94 31.05.94 17.06.94 28.06.94 28.06.94 04.08.94 19.09.94 13.10.94
MUI 13V01 13V01 13V01 13V01 13V02 13V02 13V03 13V03
Release 13V03b 13V03c 13V04 13V04a 13V05 13V05a 13V05b 13V06
List no. FW-13- - - - - - - 001-96 001-98
Date 28.10.94 05.12.94 27.12.94 02.03.95 21.03.95 02.11.95 23.09.96 30.12.98
MUI 13V03 13V03 13V04 13V04 13V05 13V05 13V05 13V05
Hardware and Software Identification Interpretation 5-3
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Firmware release versions
Release 13V01a 13V01b 13V01c 13V01d 13V02 13V02a 13V03 13V03a
List no FW-13- - - - - - - - -
Date 16.05.94 31.05.94 17.06.94 28.06.94 21.07.94 04.08.94 19.09.94 13.10.94
MT-CNC 13V01 13V01 13V01 13V01 13V02 13V02 13V03 13V03
CPU03 13V03 13V03 13V03 13V04 13V05 13V05 13V06 13V06
SIO02 13V00 13V00 13V00 13V00 13V01 13V01 13V01 13V01
PLC03 13V04 13V04 13V08 13V08 13V09 13V09 13V10 13V10
SLM02 13V02 13V02 13V02 13V02 13V04 13V04 13V04 13V04
IBM01 12V00 12V00 12V00 12V00 12V00 12V00 12V00 12V00
APR04 13V03 13V03 13V03 13V03 13V07 13V07 13V08 13V08
DAS02 07V09 07V09 07V09 07V09 07V09 07V09 07V09 07V09
RECO 11V00 11V00 11V00 11V00 11V00 11V00 11V01 11V01
BTM01 11V00 11V00 11V00 11V00 11V00 11V00 11V00 11V00
BTM02 05V00 05V00 05V00 05V00 05V00 05V00 05V00 05V00
BTM03/04 13V01 13V02 13V02 13V02 13V04 13V05 13V06 13V06
SOT02 13V01 13V01 13V01 13V01 13V01 13V02 13V02 13V02
NCA04 PLS01 - - - - - - - -
Release 13V03b 13V03c 13V04 13V04a 13V05 13V05a 13V05b 13V06
List no FW-13- - - - - - - - 001-98
Date 28.10.94 05.12.94 27.12.94 02.03.95 21.03.95 02.11.95 23.09.96 30.12.98
MT-CNC 13V03 13V03 13V04 13V04 13V05 13V05 13V05 13V05
CPU03 13V06 13V06 13V07 13V07 13V07 13V07 13V07 13V07
SIO02 13V01 13V01 13V01 13V01 13V01 13V01 13V01 13V01
PLC03 13V10 13V11 13V11 13V12 13V12 13V13 13V14 13V14
SLM02 13V04 13V04 13V04 13V06 13V06 13V10 13V11 13V11
IBM01 12V00 12V00 12V00 12V00 12V00 12V00 12V00 12V00
APR04 13V09 13V09 13V09 13V09 13V09 13V10 13V11 13V11
DAS02 07V09 07V10 07V10 07V10 07V11 07V11 07V13 07V13
RECO 11V02 11V03 11V03 11V03 11V03 11V03 11V04 11V04
BTM01 11V00 11V00 11V00 11V00 11V00 11V00 11V00 11V00
BTM02 05V00 05V00 05V00 05V00 05V00 05V00 05V00 05V00
BTM03/04 13V06 13V08 13V08 13V08 13V08 13V09 13V09 13V09
SOT02 13V02 13V02 13V04 13V04 13V04 13V04 13V04 13V04
NCA04 PLS01 - - - - - - 13V02 13V02
5-4 Interpretation Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
5.3 Version 14
Software release versions
Release 14V00 14V01 14V02 14V02a 14V02b 14V03 14V03a 14V04
List no. FW-14- - - - - - - - -
Date 26.07.94 18.08.94 15.09.94 20.09.94 20.09.94 20.09.94 06.12.94 13.03.95
BTV01.1 PC*MS*-DOS
- - - - - - - -
MUI 14V00 14V01 14V02 14V02 14V02 14V03 14V03 14V04
GUI 14V00 14V01 14V02 14V02 14V02 14V03 14V03 14V04
ZYK CBD - - - - - - - -
CBF - - - - - - - -
CME - - - - - - - -
SFP-PC BDF - - 14V02 14V02 14V02 14V06 14V06 14V06
Release 14V04a 14V04b 14V04c 14V04d 14V04e 14V05
List no. FW-14- 001-95 002-95 001-96 002-96 003-96 001-99
Date 16.03.95 02.05.95 17.01.96 02.05.96 14.05.96 11.01.99
BTV01.1 PC*MS*-DOS
- 06V22 06V22 06V22 06V22 06V22
MUI 14V04 14V04 14V04 14V04 14V04 14V04
GUI 14V04 14V04 14V04 14V04 14V04 14V04
ZYK CBD - 14V01 14V02 14V02 14V02 14V02
CBF - 14V01 14V01 14V01 14V01 14V01
CME - 14V01 14V01 14V01 14V01 14V01
SFP-PC BDF 14V06 14V06 14V06 14V06 14V06 14V06
Hardware and Software Identification Interpretation 5-5
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Firmware release versions
Release 14V00 14V01 14V02 14V02a 14V02b 14V03 14V03a 14V04
List no FW-14- - - - - - - - -
Date 26.07.94 18.08.94 15.09.94 20.09.94 20.09.94 20.09.94 06.12.94 13.03.95
MT-CNC 14V00 14V01 14V02 14V02 14V02 14V03 14V03 14V04
CPU03 14V00 14V02 14V03 14V03 14V05 14V05 14V05 14V06
SIO02 14V00 14V01 14V01 14V01 14V01 14V01 14V01 14V02
PLC03 14V00 14V01 14V01 14V01 14V01 14V01 14V01 14V03
SLM02 14V02 14V02 14V02 14V02 14V02 14V03 14V03 14V04
IBM01 12V00 12V00 12V00 12V00 12V00 12V00 12V00 12V00
APR04 14V00 14V03 14V03 14V03 14V09 14V09 14V09 14V10
DAS02 07V09 07V09 07V10 07V10 07V10 07V10 07V10 07V11
BTV01.1 MSD - - - - - - - -
RECO 11V00 11V00 11V00 11V01 11V02 11V02 11V03 11V03
BTM01 11V00 11V00 11V00 11V00 11V00 11V00 11V00 11V00
BTM02 05V00 05V00 05V00 05V00 05V00 05V00 05V00 05V00
BTM03/04 14V02 14V03 14V03 14V04 14V04 14V05 14V06 14V06
SOT02 13V02 13V02 14V01 14V01 14V01 14V02 14V02 14V02
Release 14V04a 14V04b 14V04c 14V04d 14V04e 14V05
List no FW-14- 001-95 002-95 001-96 002-96 003-96 001-99
Date 16.03.95 18.08.95 17.01.96 02.05.96 14.05.96 11.01.99
MT-CNC 14V04 14V04 14V04 14V04 14V05 14V05
CPU03 14V06 14V07 14V07 14V07 14V07 14V07
SIO02 14V02 14V02 14V02 14V02 14V02 14V02
PLC03 14V03 14V03 14V03 14V03 14V03 14V03
SLM02 14V05 14V08 14V09 14V09 14V10 14V10
IBM01 12V00 12V00 12V00 12V00 12V00 12V00
APR04 14V11 14V11 14V11 14V11 14V11 14V11
DAS02 07V11 07V11 07V11 07V13 07V13 07V13
BTV01.1 MSD - 01V00 01V00 01V00 01V00 01V00
RECO 11V03 11V03 11V03 11V03 11V04 11V04
BTM01 11V00 11V00 11V00 11V00 11V00 11V00
BTM02 05V00 05V00 05V00 05V00 05V00 05V00
BTM03/04 14V06 14V06 14V09 14V09 14V10 14V10
SOT02 14V02 14V02 14V02 14V02 14V02 14V02
5-6 Interpretation Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
5.4 Version 15
Software release versions
Release 15V04 15V04 15V04 15V05 15V05 15V06 15V08 15V08
List no. FW-15- 002-95 003-95 004-95 005-95 006-95 007-95 001-96 002-96
Date 02.08.95 16.08.95 11.09.95 04.10.95 16.10.95 02.11.95 09.01.96 12.01.96
BTV01.1 PC*MS*-DOS
06V00 06V00 06V00 06V00 06V00 06V00 06V00 06V00
BTV01.2 PC*MS*-DOS
06V00 06V00 06V00 06V00 06V00 06V00 06V00 06V00
MUI 15V04 15V04 15V04 15V05 15V05 15V06 15V08 15V08
GUI 15V04 15V04 15V04 15V05 15V05 15V06 15V08 15V08
ZYK CBD 15V00 15V00 15V00 15V00 15V00 15V01 15V02 15V02
CBF 15V00 15V00 15V01 15V01 15V01 15V01 15V01 15V01
CME 15V00 15V00 15V01 15V01 15V01 15V01 15V01 15V01
SFP-MT BDF 15V03 15V03 15V03 15V03 15V03 15V03 15V03 15V03
SFP-PC BDF 15V03 15V03 15V03 15V03 15V03 15V03 15V03 15V03
SFP-KC BDF 15V02 15V02 15V02 15V02 15V02 15V02 15V02 15V02
Release 15V09 15V09 15V10 15V11 15V12 15V12 15V13 15V14
List no. FW-15- 003-96 004-96 006-96 007-96 008-96 001-97 001-98 002-98
Date 05.02.96 04.03.96 24.06.96 03.09.96 25.11.96 02.06.97 04.06.98 09.10.98
BTV01.1 PC*MS*-DOS
06V00 06V00 06V00 06V00 06V00 06V00 06V00 06V00
BTV01.2 PC*MS*-DOS
06V00 06V00 06V00 06V00 06V00 06V00 06V00 06V00
MUI 15V09 15V09 15V10 15V11 15V12 15V12 15V13 15V14
GUI 15V09 15V09 15V10 15V11 15V12 15V12 15V13 15V14
ZYK CBD 15V03 15V03 15V03 15V03 15V03 15V03 15V03 15V03
CBF 15V02 15V02 15V02 15V02 15V02 15V02 15V02 15V02
CME 15V02 15V02 15V02 15V02 15V02 15V02 15V02 15V02
SFP-MT BDF 15V03 15V03 15V03 15V03 15V03 15V03 15V03 15V03
SFP-PC BDF 15V03 15V03 15V03 15V03 15V03 15V03 15V03 15V03
SFP-KC BDF 15V02 15V02 15V02 15V02 15V02 15V02 15V02 15V02
Hardware and Software Identification Interpretation 5-7
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Firmware release versions
Release 15V01 15V02 15V03 15V04 15V04 15V04 15V05 15V05
List no. FW-15- 002-95 003-95 004-95 005-95 006-95
Date 23.02.95 21.04.95 06.06.95 02.08.95 16.08.95 11.09.95 04.10.95 16.10.95
MT-CNC 15V01 15V02 15V03 15V04 15V05 15V06 15V06 15V07
CPU03 15V01 15V03 15V06 15V08 15V08 15V08 15V08 15V08
SIO02 15V00 15V01 15V02 15V02 15V02 15V02 15V02 15V02
PLC03 15V02 15V03 15V04 15V05 15V05 15V06 15V06 15V07
SLM02 14V03 14V05 14V06 14V07 14V08 14V08 14V08 14V09
IBM01 12V00 12V00 12V00 12V00 12V00 12V00 12V00 12V00
APR04 15V02 15V03 15V04 15V08 15V08 15V10 15V10 15V11
DAS02 07V10 07V11 07V11 07V11 07V11 07V11 07V11 07V11
BTV01.1 MSD - - - 01V00 01V00 01V00 01V00 01V00
BTV01.2 MSD - - - 01V00 01V00 01V00 01V00 01V00
RECO 11V03 11V03 11V03 11V03 11V03 11V03 11V03 11V03
BTM01 11V00 11V00 11V00 11V00 11V00 11V00 11V00 11V00
BTM03/04 14V06 14V06 14V06 14V08 14V08 14V08 14V08 14V08
SOT02 15V01 15V01 15V02 15V03 15V03 15V03 15V03 15V03
NCA04 PLS01 13V00 13V00 13V00 13V00 13V00 13V00 13V02 13V02
Release 15V06 15V08 15V08
List no. FW-15- 007-95 001-96 002-96
Date 02.11.95 09.01.96 12.01.96
MT-CNC 15V08 15V09 15V09
CPU03 15V08 15V09 15V09
SIO02 15V02 15V02 15V02
PLC03 15V08 15V08 15V08
SLM02 14V09 14V09 14V09
IBM01 12V00 12V00 12V00
APR04 15V11 15V11 15V12
DAS02 07V11 07V11 07V11
BTV01.1 MSD 01V00 01V00 01V00
BTV01.2 MSD 01V00 01V00 01V00
RECO 11V03 11V03 11V03
BTM01 11V00 11V00 11V00
BTM03/04 14V08 14V08 14V09
SOT02 15V04 15V04 15V04
NCA04 PLS01 13V02 13V02 13V02
5-8 Interpretation Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
5.5 Version 16
Software release versions
Release 16V01 16V02 16V02 16V03 16V04 16V05
List no. FW-16- 002-96 003-96 004-96 006-96 007-96 008-96
Date 12.03.96 09.05.96 28.05.96 17.07.96 03.09.96 11.12.96
BTV01.1 PC*MS*-DOS 06V00 06V00 06V00 06V00 06V00 06V00
BTV01.2/3 PC*MS*-DOS 06V00 06V00 06V00 06V00 06V00 06V00
PC*MS*-WNT 06V00 06V00 06V00 06V00 06V00 06V00
PC*WNT-DRV 01V00 01V01 01V01 01V02 01V02 02V07
PC*WNT-FLB 01V00 01V01 01V01 01V02 01V02 02V07
PC*WNT-PFM 01V00 01V01 01V01 01V02 01V02 02V13
PC*WNT-PLB 01V00 01V01 01V01 01V02 01V02 01V08
PC*WNT-CFG 01V00 01V00 01V00 01V00 01V00 01V00
PC*WNT-DDE - 01V00 01V00 01V01 01V01 01V07
BTC05 - - - - - -
MUI 16V01 16V02 16V02 16V03 16V04 16V05
GUI 16V01 16V02 16V02 16V03 16V04 16V05
ZYK CBD 16V00 16V00 16V00 16V01 16V01 16V01
CBF 16V00 16V00 16V00 16V00 16V01 16V01
CME 16V00 16V00 16V00 16V00 16V00 16V00
SPS FBs BLF - - - - - -
ECO - - - - - -
SFP MT BDF 16V00 16V02 16V02 16V03 16V05 16V05
SFP PC BDF 16V00 16V02 16V02 16V03 16V05 16V05
SFP KC BDF 16V00 16V00 16V00 16V00 16V00 16V00
Hardware and Software Identification Interpretation 5-9
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Release 16V06 16V07 16V08 16V08 16V08 16V09 16V10
List no. FW-16- 001-97 002-97 003-97 004-97 001-98 002-98 003-98
Date 20.03.97 16.06.97 01.08.97 23.09.97 16.01.98 09.03.98 01.12.98
BTV01.1 PC*MS*-DOS 06V00 06V00 06V00 06V00 06V00 06V00 06V00
BTV01.2/3 PC*MS*-DOS 06V00 06V00 06V00 06V00 06V00 06V00 06V00
PC*MS*-WNT 06V00 06V00 06V00 06V00 06V00 06V00 06V00
PC*WNT-DRV 02V07 02V07 02V07 02V07 02V07 02V07 02V07
PC*WNT-FLB 02V07 02V07 02V07 02V07 02V07 02V07 02V07
PC*WNT-PFM 02V13 02V13 02V13 02V13 02V13 02V13 02V13
PC*WNT-PLB 01V08 01V08 01V08 01V08 01V08 01V08 01V08
PC*WNT-CFG 01V00 01V00 01V00 01V00 01V00 01V00 01V00
PC*WNT-DDE 01V07 01V07 01V07 01V07 01V07 01V07 01V07
BTC05 16V01 16V01 16V01 16V01 16V01 16V01 16V01
MUI 16V06 16V07 16V08 16V08 16V08 16V09 16V10
GUI 16V06 16V07 16V08 16V08 16V08 16V09 16V10
ZYK CBD 16V01 16V01 16V01 16V01 16V02 16V03 16V06
CBF 16V02 16V02 16V02 16V02 16V03 16V04 16V04
CME 16V00 16V00 16V00 16V00 16V00 16V00 16V03
SPS-FBs BLF 16V01 16V01 16V01 16V01 16V01 16V01 16V01
ECO 16V00 16V00 16V00 16V00 16V00 16V00 16V00
SFP-MT BDF 16V05 16V06 16V06 16V06 16V06 16V06 16V07
SFP-PC BDF 16V05 16V06 16V06 16V06 16V06 16V06 16V07
SFP-KC BDF 16V00 16V00 16V00 16V00 16V00 16V00 16V00
5-10 Interpretation Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
5.6 Version 17
Software release versions
Release 17V00 17V01 17V02 17V03 17V04
List no. FW-17- 001-97 002-97 001-98 002-98 003-98
Date 17.06.97 25.11.97 16.03.98 14.07.98 11.12.98
BTV01.1 PC*MS*-DOS 06V00 06V00 06V00 06V00 06V00
BTV01.2 - BTV01.3 - BTV30
PC*MS*-DOS 06V00 06V00 06V00 06V00 06V00
PC*MS*-WNT - 03V00 03V00 03V00 03V00
FUN*PC-PRO - 03V00 03V00 03V20 03V20
FUN*PC-RUN - 03V00 03V00 03V20 03V20
PC*WNT-DDE - 03V00 03V00 03V00 03V00
GBO 17V00 17V01 17V02 17V03 17V04
ZYK CBD 16V01 16V02 16V03 16V05 16V06
CBF 16V02 16V03 16V04 16V04 16V04
CME 16V00 16V00 16V00 16V02 16V03
SFP-MT BDF 17V01 17V01 17V01 17V03 17V03
SFP-PC BDF 17V01 17V01 17V01 17V03 17V03
SFP-KC BDF 17V01 17V01 17V01 17V03 17V03
Hardware and Software Identification Interpretation 5-11
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
5.7 Version 18
Software release versions
Release 18V00 18V01 18V02 18V03
List no. FW-18- 001-98 002-98 003-98 004-98
Date 04.98 05.98 07.98 10.98
BTV01.3 - BTV20 - BTV30
PC*MS*-DOS 06V00 06V00 06V00 06V00
PC*MS*-WNT 04V00 04V00 04V00 04V00
FUN*PC-RUN 03V00 03V20 03V20 03V20
FUN*PC-PRO 03V00 03V20 03V20 03V20
PC*WNT-DDE 03V00 03V00 03V00 03V00
GBO 18V00 18V01 18V02 18V03
PO 18V01 18V02 18V03
ZYK CBD 16V03 16V04 16V05 16V05
CBF 16V04 16V04 16V04 16V04
CME 16V00 16V01 16V02 16V03
SFP-MT BDF 18V01 18V01 18V01
SFP-PC BDF 18V01 18V01 18V01
SFP-KC BDF 18V01 18V01 18V01
5-12 Interpretation Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
5.8 Example
You have determined the following firmware and software versions of yoursystem:
B02e.PCX
B03e.PCX
Figure 5-9: Example
Use this information to enter the tables of the software and firmwarerelease versions.
Version 04.15/13 ⇒ replace since previously 16V09
The firmware need not be replaced; only versions must be replaced thatare older than 5V09.
Software
Firmware
Hardware and Software Identification Firmware and Software Ordering Procedure 6-1
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
6 Firmware and Software Ordering ProcedurePlease complete the order form below if the software or firmware in yoursystem is affected by the millennium change problem. Use a separateform for each controller. Please send your order to your local IndramatService Center or directly to Indramat Lohr (by E-mail or fax).
E-mail: [email protected]
Fax: +49 9352/404 324
Address :
Company
Contact
Street
Town
General information :
Machine
Manufacturer
Controller information:
Type internal notes
Serial number
SWA version
FWA version
Information about peripherals :
Type Number Installed Firmware internalnotes
BTM 01
BTM 03/04
RECO-G
SOT 02
6-2 Firmware and Software Ordering Procedure Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Hardware and Software Identification Sales & Service Facilities
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Kundenbetreuungsstellen - Sales & Service Facilities
Deutschland – Germany vom Ausland: (0) nach Landeskennziffer weglassen!!from abroad: don’t dial (0) after country code!
Vertriebsgebiet Mitte SALES
Germany Centre Service
INDRAMAT GmbHBgm.-Dr.-Nebel-Str. 2D - 97816 Lohr am Main
Telefon: +49 (0)9352/40-0Telefax: +49 (0)9352/40-4885
Vertriebsgebiet Ost SALES
Germany East Service
INDRAMAT GmbHBeckerstraße 31D - 09120 Chemnitz
Telefon: +49 (0)371/35 55-0Telefax: +49 (0)371/35 55-333
Vertriebsgebiet West SALES
Germany West Service
INDRAMAT GmbHHarkortstraße 25D - 40849 Ratingen
Telefon: +49 (0)2102/43 18-0Telefax: +49 (0)2102/41 315
Vertriebsgebiet Nord SALES
Germany North Service
INDRAMAT GmbHKieler Straße 212D - 22525 Hamburg
Telefon: +49 (0)40/85 31 57-0Telefax: +49 (0)40/85 31 57-15
Vertriebsgebiet Süd SALES
Germany South Service
INDRAMAT GmbHRidlerstraße 75D-80339 München
Telefon: +49 (0)89/540138-30Telefax: +49 (0)89/540138-10
Gebiet Südwest SALES
Germany South-West Service
INDRAMAT GmbHBöblinger Straße 25D-71229 Leonberg
Telefon: +49 (0)7152/9 72-6Telefax: +49 (0)7152/9 72-727
INDRAMAT Service-Hotline
INDRAMAT GmbHTelefon: +49 (0)172/660 04 06
oder/or
Telefon: +49 (0)171/333 88 26
Kundenbetreuungsstellen in Deutschland - Service agencies in Germany
Sales & Service Facilities Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Europa – Europe vom Ausland: (0) nach Landeskennziffer weglassen, 0 nach Landeskennziffer mitwählen!from abroad: don’t dial (0) after country code, dial 0 after country code!
Austria SALES Service
Mannesmann Rexroth Ges.m.b.H.Geschäftsbereich INDRAMATHägelingasse 3A - 1140 Wien
Telefon: +43 (0)1/9852540-400Telefax: +43 (0)1/9852540-93
Austria SALES Service
Mannesmann Rexroth G.m.b.H.Geschäftsbereich INDRAMATIndustriepark 18A - 4061 Pasching
Telefon: +43 (0)7221/605-0Telefax: +43 (0)7221/605-21
Belgium SALES Service
Mannesmann Rexroth N.V.-S.A.Geschäftsbereich INDRAMATIndustrielaan 8B-1740 Ternat
Telefon: +32 (0)2/5823180Telefax: +32 (0)2/5824310
Denmark SALES Service
BEC ASZinkvej 6DK-8900 Randers
Telefon: +45 (0)87/11 90 60Telefax: +45 (0)87/11 90 61
England SALES Service
Mannesmann Rexroth Ltd.INDRAMAT DivisionBroadway Lane, South CerneyGB - Cirencester, Glos GL7 5UH
Telefon: +44 (0)1285/863000Telefax: +44 (0)1285/863030
Finland SALES Service
Rexroth Mecman OYINDRAMAT divisionSF-017 40 Vantaa
Telefon: +358 (0)9/84 91 11Telefax: +358 (0)9/84 91 13 60
France SALES Service
Mannesmann Rexroth S.A.Division INDRAMATParc des Barbanniers4, Place du VillageF-92632 Gennevilliers Cedex
Telefon: +33 (0)141 47 54 30Telefax: +33 (0)147 94 69 41Hotline: +33 (0)6 08 33 43 28
France SALES Service
Mannesmann Rexroth S.A.Division INDRAMAT270, Avenue de LardenneF - 31100 Toulouse
Telefon: +33 (0)5 61 49 95 19Telefax: +33 (0)5 61 31 00 41
France SALES Service
Mannesmann Rexroth S.A.Division INDRAMAT91, Bd. Irène Joliot-CurieF - 69634 Vénissieux – Cedex
Telefon: +33 (0)4 78 78 53 65Telefax: +33 (0)4 78 78 52 53
Italy SALES Service
Mannesmann Rexroth S.p.A.Divisione INDRAMATVia G. Di Vittoria, 1I - 20063 Cernusco S/N.MI
Telefon: +39 02/92 36 52 70Telefax: +39 02/92 36 55 12
Italy SALES Service
Mannesmann Rexroth S.p.A.Divisione INDRAMATVia Borgomanero, 11I - 10145 Torino
Telefon: +39 011/7 71 22 30Telefax: +39 011/7 71 01 90
Italy SALES Service
Mannesmann Rexroth S.p.A.Divisione INDRAMATVia del Progresso, 16 (Zona Ind.)I - 35020 Padova
Telefon: +39 049/8 70 13 70Telefax: +39 049/8 70 13 77
Italy SALES Service
Mannesmann Rexroth S.p.A.Divisione INDRAMATVia de Nicola, 12I - 80053 Castellamare di Stabia NA
Telefon: +39 081/8 72 30 37Telefax: +39 081/8 72 30 18
Italy SALES Service
Mannesmann Rexroth S.p.A.Divisione INDRAMATViale Oriani, 38/AI - 40137 Bologna
Telefon: +39 051/34 14 14Telefax: +39 051/34 14 22
Netherlands SALES Service
Hydraudyne Hydrauliek B.V.Kruisbroeksestraat 1(P.O. Box 32)NL - 5281 RV Boxtel
Telefon: +31 (0)411/65 19 51Telefax: +31 (0)411/65 14 83e-mail: [email protected]
Netherlands SALES Service
Hydrocare B.V.Kruisbroeksestraat 1(P.O. Box 32)NL - 5281 RV Boxtel
Telefon: +31 (0)411/65 19 51Telefax: +31 (0)411/67 78 14
Poland SALES Service
Mannesmann Rexroth Sp.zo.o.Biuro Poznanul. Dabrowskiego 81/85PL – 60-529 Poznan
Telefon: +48 061/847 67 99Telefax: +48 061/847 64 02
Russia SALES Service
Tschudnenko E.B.Arsenia 22RUS - 153000 IvanovoRußland
Telefon: +7 093/223 96 33oder/or +7 093/223 95 48Telefax: +7 093/223 46 01
Spain SALES Service
Mannesmann Rexroth S.A.Divisiòn INDRAMATCentro Industrial SantigaObradors s/nE-08130 Santa Perpetua de MogodaBarcelona
Telefon: +34 937 47 94 00Telefax: +34 937 47 94 01
Spain SALES Service
Goimendi S.A.División IndramatJolastokieta (Herrera)Apartado 11 37E - 20017 San Sebastian
Telefon: +34 9 43/40 01 63Telefax: +34 9 43/39 17 99
Sweden SALES Service
Rexroth Mecman Svenska ABINDRAMAT DivisionVaruvägen 7S - 125 81 Stockholm
Telefon: +46 (0)8/727 92 00Telefax: +46 (0)8/647 32 77
Slowenia SALES Service
INDRAMAT elektromotorji d.o.o.Otoki 21SLO - 64 228 Zelezniki
Telefon: +386 64/61 73 32Telefax: +386 64/64 71 50
Turkey SALES Service
Mannesmann Rexroth Hidropar A..S.Fevzi Cakmak Cad No. 3TR - 34630 Sefaköy Istanbul
Telefon: +90 212/541 60 70Telefax: +90 212/599 34 07
Switzerland SALES
-East- Service
Mannesmann Rexroth Schweiz AGGeschäftsbereich INDRAMATGewerbestraße 3CH-8500 Frauenfeld
Telefon: +41 (0)52/720 21 00Telefax: +41 (0)52/720 21 11
Switzerland SALES
-West- Service
Mannesmann Rexroth Suisse SADépartement INDRAMATRue du village 1CH-1020 Renens
Telefon: +41 (0)21/632 84 20Telefax: +41 (0)21/632 84 21
Europäische Kundenbetreuungsstellen (ohne Deutschland)European Service agencies (without Germany)
Hardware and Software Identification Sales & Service Facilities
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Außerhalb Europa - outside Europe vom Ausland: (0) nach Landeskennziffer weglassen!from abroad: don’t dial (0) after country code!
Argentina SALES Service
Mannesmann Rexroth S.A.I.C.Division INDRAMATAcassusso 48 41/7RA - 1605 Munro (Buenos Aires)
Telefon: +54 (0)1/756 01 40+54 (0)1/756 01 36
Argentina SALES Service
NAKASEServicio Tecnico CNCCalle 49, No. 5764/66RA - 1653 Villa BalesterProv. - Buenos Aires
Telefon: +54 (0) 11/4768 36 43Telefax: +54 (0) 11/4768 24 13e-mail: [email protected]
Australia SALES Service
AIMS - Australian IndustrialMachinery Services Pty. Ltd.Unit 3/45 Horne STCampbellfield , VIC 3061AUS - Melbourne
Telefon: +61 (0)3/93 59 02 28Telefax: +61 (0)3/93 59 02 86
Australia SALES Service
Mannesmann Rexroth Pty. Ltd.No. 7, Endeavour WayBraeside Victoria, 31 95AUS – Melbourne
Telefon: +61 (0)3/95 80 39 33Telefax: +61 (0)3/95 80 17 33Email: [email protected]
Brazil SALES Service
Mannesmann RexrothAutomação Ltda.Divisão INDRAMATRua Georg Rexroth, 609Vila Padre AnchietaBR - 09951-270 Diadema-SP[ Caixa Postal 377 ][ BR-09901-970 Diadema-SP ]
Telefon: +55 (0)11/745 90 60+55 (0)11/745 90 70
Telefax: +55 (0)11/745 90 50
Brazil SALES Service
Mannesmann RexrothAutomação Ltda.Divisão INDRAMATRua Umberto Pinheiro Vieira, 100Distrito IndustrialBR - 09220-390 Joinville - SC[ Caixa Postal 1273 ]
Tel./Fax: +55 (0)47/473 55 833Mobil: +55 (0)47 974 6645e-mail: [email protected]
Canada SALES Service
Basic Technologies CorporationBurlington Division3426 Mainway DriveBurlington, OntarioCanada L7M 1A8
Telefon: +1 905/335 55 11Telefax: +1 905/335-41 84
China SALES Service
Mannesmann Rexroth (China) Ldt.Shanghai Parts & Service Center199 Wu Cao Road, Hua CaoMinhang DistrictPRC - Shanghai 201 103
Telefon: +86 21/62 20 00 58Telefax: +86 21/62 20 00 68
China SALES Service
Mannesmann Rexroth (China) Ldt.15/F China World Trade Center1, Jianguomenwai AvenuePRC - Beijing 100004
Telefon: +86 10/65 05 03 80Telefax: +86 10/65 05 03 79
China SALES Service
Mannesmann Rexroth (China) Ldt.A-5F., 123 Lian Shan StreetSha He Kou DistrictPRC - Dalian 116 023
Telefon: +86 411/46 78 930Telefax: +86 411/46 78 932
Hongkong SALES Service
Rexroth (China) Ldt.1/F., 19 Cheung Shun StreetCheung Sha Wan,Kowloon, Hongkong
Telefon: +852 22 62 51 00Telefax: +852 27 44 02 78
India SALES Service
Mannesmann Rexroth (India) Ltd.INDRAMAT DivisionPlot. 96, Phase IIIPeenya Industrial AreaIND - Bangalore - 560058
Telefon: +91 (0)80/8 39 73 74Telefax: +91 (0)80/8 39 43 45
India SALES Service
Mannesmann Rexroth (India) Ltd.INDRAMAT DivisionPlot. A-58, TTC Industrial AreaThane Turbhe Midc RoadMahape VillageIND - Navi Mumbai - 400 701
Telefon: +91 (0)22/7 61 46 22Telefax: +91 (0)22/7 68 15 31
Indonesia SALES Service
PT. Rexroth WijayakusumaJl. Raya Bekasi Km 21PulogadungRI - Jakarta Timur 13920
Telefon: +62 21/4 61 04 87+62 21/4 61 04 88
Telefax: +62 21/4 60 01 52
Japan SALES Service
Rexroth Automation Co., Ltd.Nagoya Service CenterYutakagaoka 1810Meito-ku, NAGOYA465-0035 Japan
Telefon: +81 (0)52/777 88 41+81 (0)52/777 88 53+81 (0)52/777 88 79
Telefax: +81 (0)52/777 89 01
Japan SALES Service
Rexroth Automation Co., Ltd.INDRAMAT Division1F, I.R. BuildingNakamachidai 4-26-44Tsuzuki-ku, YOKOHAMA224-0041 Japan
Telefon: +81 459/42-72 10Telefax: +81 459/42-03 41
Mexico SALES Service
Rexroth Mexico S.A. de C.V.Calle Neptuno 72Unidad Ind. VallejoMEX - 07700 Mexico, D.F.
Telefon: +52 5 754 17 11+52 5 754 36 84+52 5 754 12 60
Telefax: +52 5 754 50 73+52 5 752 59 43
Korea SALES Service
Mannesmann Rexroth-Seki Co Ltd.1500-12 Da-Dae-DongROK - Saha-Ku, Pusan, 604-050
Telefon: +82 (0)51/2 60 06 18Telefax: +82 (0)51/2 60 06 19
Korea SALES Service
Seo Chang Corporation Ltd.Room 903, Jeail Building44-35 Yeouido-DongYeoungdeungpo-KuC.P.O.Box 97 56ROK - Seoul
Telefon: +82 (0)2/7 80 82 08+82 (0)2/7 80 82 09
Telefax: +82 (0)2/7 84 54 08
South Africa SALES Service
HYTEC Automation (Pty) Ltd.28 Banfield Road,Industria NorthRSA - Maraisburg 1700
Telefon: +27 (0)11/673 20 80Telefax: +27 (0)11/673 72 69
Taiwan SALES Service
Rexroth Uchida Co., Ltd.No.1, Tsu Chiang StreetTu Cheng Ind. EstateTaipei Hsien, Taiwan, R.O.C.
Telefon: +886 2/2 68 13 47Telefax: +886 2/2 68 53 88
Kundenbetreuungsstellen außerhalb Europa - Service agencies outside Europe
Sales & Service Facilities Hardware and Software Identification
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Außerhalb Europa / USA - outside Europe / USA
USA SALES Service
Mannesmann Rexroth CorporationINDRAMAT Division5150 Prairie Stone ParkwayUSA -Hoffman Estates, IL 60192-3707
Telefon: +1 847/6 45 36 00Telefax: +1 847/6 45 62 01
USA SALES Service
Mannesmann Rexroth CorporationINDRAMAT DivisionCentral Region Technical CenterUSA - Auburn Hills, MI 48326
Telefon: +1 248/3 93 33 30Telefax: +1 248/3 93 29 06
USA SALES Service
Mannesmann Rexroth CorporationINDRAMAT DivisionSoutheastern Technical Center3625 Swiftwater Park DriveUSA - SuwaneeGeorgia 30174
Telefon: +1 770/9 32 32 00+1 770/9 32 19 03
USA SALES Service
Mannesmann Rexroth CorporationINDRAMAT DivisionNortheastern Technical Center99 Rainbow RoadUSA - East Granby,Connecticut 06026
Telefon: +1 860/8 44 83 77+1 860/8 44 85 95
USA SALES Service
Mannesmann Rexroth CorporationINDRAMAT DivisionCharlotte Regional Sales Office14001 South Lakes DriveUSA - Charlotte,North Carolina 28273
Telefon: +1 704/5 83 97 62+1 704/5 83 14 86
Kundenbetreuungsstellen außerhalb Europa / USA Service agencies outside Europe / USA
Hardware and Software Identification Notes
DOK-MT*CNC-HW*SW*IDENT-IF02-EN-P
Notes
Indramat