mt t4 mini trim switches -...

3
TRIM SWITCHES OTTO Mini Trims are toggle switches available in 2-way, 4-way, 4-way plus pushbutton, and 8-way versions. The T4 Mini Trim is a single pole, 4 throw, center off, momentary contact (self return to center off). Numerous button styles are available on both the Commercial and Military grade switch versions. Mini Trims are typically press fit into control grips or panel mounted using versions with an 11/16” threaded case. Mini Trims are also available with multiple sealing levels to fit all applications. Standard Characteristics/Ratings: ELECTRICAL RATINGS: Load Rating Resistive 10mA @ 5VDC (low level) Inductive 1A @ 28VDC DWV 1050Vrms Low Level 10mA Resistive @ 5VDC Electrical Life: 100,000 cycles 1A Inductive @ 28VDC Lever Travel: 15° max from center OFF Seal: IP64 or IP68S or MIL-PRF-8805 Design 3 Operating Temp Range: -55°C to +85°C Operating Force: 16 oz +/- 6 oz Lever Pivot & Stop Strength: Switch is capable of withstanding a force of 25.0 lbs. applied to the actuating button. The button also withstands 15.0 lbs. minimum pull force. MATERIALS: Case: Aluminum alloy or thermoplastic Button: Thermoplastic Terminals: Silver over brass Brass with gold over silver for low level Terminal Hardware: None provided Mounting Hardware: Hex nut, tooth lockwasher, panel seal gasket where applicable Series Grade Button Style Case Style Seal Level Current Rating Button Color* T4. 4-Way C. Commercial M. Military A. 2-Way Jog B. Tall Jog C. Rocker D. Cone E. LRUD Hat F. IOUD Hat G. Hat H. Stadium J. Castle K. 4-Way Jog L. Short Bat M. Bat N. Post P. 4-40 Threaded Post 1. Press Fit 2. Threaded 1. IP64 Dusttight 2. IP68S Watertight 3. Design Symbol 3 Watertight per MIL-PRF-8805 and Meets Environmental Testing per MIL-DTL-9419 1. Standard 2. Low Level 1. Red 2. Black 8. Gray N. Not Applicable** T4 MINI TRIM PART NUMBER CODE T4 X X X X X X * Contact factory for additional button colors. ** Use when specifying button styles L, M, N and P. Press Fit Typical Dimensions Threaded Body T4 T4 MINI TRIM SWITCHES T4 MINI TRIM SWITCHES MT 4-WAY MINI TRIM, COMMERCIAL & MILITARY GRADES Specifications Subject To Change Without Notice www.ottoexcellence.com 166 Press Fit Threaded Body

Upload: others

Post on 30-Aug-2019

9 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MT T4 MINI TRIM SWITCHES - downloads.cdn.re-in.dedownloads.cdn.re-in.de/700000-724999/709424-da-01-en-4WEGE...HAT_LOW_L.pdf · TRIM SWITCHES OTTO Mini Trims are toggle switches available

TRIM

SWITC

HES

OTTO Mini Trims are toggle switches available in 2-way, 4-way, 4-way plus pushbutton, and 8-way versions. The T4 Mini Trim is a single pole, 4 throw, center off, momentary contact (self return to center off). Numerous button styles are available on both the Commercial and Military grade switch versions. Mini Trims are typically press fit into control grips or panel mounted using versions with an 11/16” threaded case. Mini Trims are also available with multiple sealing levels to fit all applications.

StandardCharacteristics/Ratings:

ELECTRICALRATINGS:

Load Rating

Resistive 10mA @ 5VDC (low level)

Inductive 1A @ 28VDC

DWV 1050Vrms

Low Level 10mA Resistive @ 5VDC

ElectricalLife: 100,000 cycles 1A Inductive @ 28VDC

LeverTravel: 15°maxfromcenterOFF

Seal: IP64orIP68SorMIL-PRF-8805Design3

OperatingTempRange: -55°C to +85°C

OperatingForce: 16 oz +/- 6 oz

LeverPivot&StopStrength: Switch is capable of withstanding a force of 25.0 lbs. applied to the actuating button. The button also withstands 15.0 lbs. minimum pull force.

MATERIALS:

Case: Aluminum alloy or thermoplastic

Button: Thermoplastic

Terminals: Silver over brass Brass with gold over silver for low level

TerminalHardware: None provided

MountingHardware: Hex nut, tooth lockwasher, panel seal gasket where applicable

Series Grade ButtonStyle CaseStyle SealLevel CurrentRating ButtonColor*T4. 4-Way C. Commercial

M. MilitaryA.2-WayJogB.TallJogC. RockerD. ConeE. LRUD HatF. IOUD HatG. HatH. StadiumJ. CastleK. 4-WayJogL. Short BatM. BatN. PostP. 4-40 Threaded Post

1. PressFit2. Threaded

1. IP64 Dusttight2. IP68S Watertight3. Design Symbol 3 WatertightperMIL-PRF-8805andMeets Environmental Testing per MIL-DTL-9419

1. Standard2. Low Level

1. Red2. Black 8. GrayN. Not Applicable**

T4MINITRIMPARTNUMBERCODET4–XXXXXX

* Contact factory for additional button colors.

** Use when specifying button styles L, M, N and P.

PressFit

TypicalDimensions

ThreadedBody

T4

T4 MINI TRIM SWITCHES T4 MINI TRIM SWITCHES

MT

4-WAY MINI TRIM, COMMERCIAL & MILITARY GRADES

Specifications Subject To Change Without Notice www.ottoexcellence.com 166

PressFit ThreadedBody

Page 2: MT T4 MINI TRIM SWITCHES - downloads.cdn.re-in.dedownloads.cdn.re-in.de/700000-724999/709424-da-01-en-4WEGE...HAT_LOW_L.pdf · TRIM SWITCHES OTTO Mini Trims are toggle switches available

TRIM

SWITC

HES

A - 2-WAY JOG

D - CONE

G - HAT

K - 4-WAY JOG

B - TALL JOG

E - LRUD HAT

H - STADIUM

L - SHORT BAT

C - ROCKER

F - IOUD HAT

J - CASTLE

N - POST P - 4-40 THREADED POST

M - LONG BAT

MINI TRIM BUTTON STYLES MINI TRIM BUTTON STYLES

MT

MINI TRIM BUTTON STYLES

Specifications Subject To Change Without Notice www.ottoexcellence.com 172

Page 3: MT T4 MINI TRIM SWITCHES - downloads.cdn.re-in.dedownloads.cdn.re-in.de/700000-724999/709424-da-01-en-4WEGE...HAT_LOW_L.pdf · TRIM SWITCHES OTTO Mini Trims are toggle switches available

T4 MINI TRIM SWITCHES T4 MINI TRIMSWITCHES

MT

Specifications Subject To Change Without Notice www.ottoexcellence.com 121

TRIM

SWITC

HES

4-WAY MINI TRIM, COMMERCIAL & MILITARY GRADES

OTTO Mini Trims are toggle switches available in 2-way, 4-way,4-way plus pushbutton, and 8-way versions. Numerous buttonstyles are available on both the Commercial and Military gradeswitch versions. Mini Trims are typically press fit into control gripsor panel mounted using versions with an 11/16" threaded case.Mini Trims are also available with multiple sealing levels to fitall applications.

Press Fit

Typical Dimensions

Threaded Body

Standard Characteristics/Ratings:

ELECTRICAL RATINGS:

Load Rating

Resistive 10mA @ 5VDC (low level)

Inductive 1A @ 28VDC

DWV 1050Vrms

Low Level 10mA Resistive @ 5VDC

Electrical Life: 100,000 cycles 1A Inductive @ 28VDC

Lever Travel: 15° max from center OFF

Seal: IP64 or IP68S or MIL-PRF-8805 Design 3

Operating Temp Range: -55°C to +85°C

Operating Force: 16 oz +/- 6 oz

Lever Pivot & Stop Strength: Switch is capable of withstanding a force of 20.0 lbs. applied to the actuating button. The button alsowithstands 15.0 lbs. minimum pull force.

MATERIALS:

Case: Aluminum alloy or thermoplastic

Button: Thermoplastic

Terminals: Silver over brassGold over silver over brass for low level

Terminal Hardware: None provided

Mounting Hardware: Hex nut, tooth lockwasher, panel seal gasketwhere applicable

Series Grade Button Style Case Style Seal Level Current Rating Button Color*T4. 4-Way C. Commercial

M.MilitaryA. 2-Way JogB. Tall JogC. RockerD. ConeE. LRUD HatF. IOUD HatG. HatH. StadiumJ. CastleK. 4-Way JogL. Short BatM.BatN. PostP. 4-40 Threaded Post

1. Press Fit2. Threaded

1. IP64 Dusttight2. IP68S Watertight3.Mil. Watertight Design 3

1. Std.2. Low Level

1. Red2. Black 8. GrayN. Not Applicable**

T4 MINI TRIM PART NUMBER CODET4 – X X X X X X

* Contact factory for additionalbutton colors.

** Use when specifying buttonstyles L, M, N and P

T4