MINISTRY OF EDUCATION, MALAYSIA

December2013

MINISTRY OF EDUCATION, MALAYSIA

VOCATIONAL COLLEGE STANDARD CURRICULUM

COURSE INFORMATIONCOURSE NAME:WORKSHOP PRACTICE

CODE NAME:MTA 101

LEVEL:1 SEMESTER 1

CREDIT UNIT:2.0

CONTACT HOUR:FACE TO FACE:4.0 HOURS/WEEK

NON FACE TO FACE:

COURSE TYPE:VOCATIONAL

PREREQUISITE:-

CORE REQUISITE:-

COURSE OUTCOMESAt the end of the COURSE, students should be able to:-

1. Perform workshop layout2. Implement workshop housekeeping

3. Implement workshop safety rules

4. Conduct basic first aid treatment

5. Distinguish workshop tools

6. Maintain workshop tools and equipment

7. Ensure types of metal required

8. Conduct material cutting

9. Conduct metal reference edge10. Conduct layout and marking work piece11. Conduct metal drilling and tapping

12. Conduct metal surface filing

COURSE DESCRIPTIONThis COURSE covers workshop practice using workshop layout plan, safety signage, fire extinguisher, first aid kit, personal protection equipment (PPE), emergency rescue manual, tools inventory, bench fitting tools and equipment, hand tools set, measuring tools, material for fitting work, technical drawing equipment, project blue print, cutting tool so that workshop safety rules implemented, fire extinguisher handling and first aid treatment conducted; workshop tools and equipments arranged; layout and marking work piece, material cutting, metal surface filing, metal drilling and tapping in accordance with Standard Operating Procedure.ONTENT AND LEARNING STANDARDSPROGRAM:AUTOMOTIVE TECHNOLOGY

COURSE NAME:WORKSHOP SAFETY PRACTICES

CODE NAME:MTA 101

CONTENT STANDARD

LEARNING STANDARD

PERFORMANCE CRITERIA

1. CARRY OUT WORKSHOP SAFETY PRACTICES1.1 Perform workshop layout1.2 Implement workshop housekeeping

1.3 Implement workshop safety rules

1.4 Conduct basic first aid treatment

1.1.1 Provide a chart layout referred to workshop standard practice

1.1.2 Identify and interpret emergency exit, safety sign ,fire extinguisher and first aid kit location

1.2.1 Demonstrate 5S practice and clean-up before and after practical work in accordance with 5S practices

1.2.2 Comply with the safety requirements referred to Occupational Safety and Health Act .(OSHA).

1.3.1 Clean and arrange workshop equipments used as in the workshop pratice standards.

1.3.2 Comply with safety signs referred to Occupational Safety and Health Act Occupational Safety and Health Act.(OSHA).

1.3.3 Ensure the periodical maintenance of fire extinguishers referred to Occupational Safety and Health Act.(OSHA)

1.4.1 Provide first-aid kit at the workshop referred to Occupational Safety and Health Act.(OSHA)

1.4.2 Demonstrate basic first-aid treatment referred to Occupational Safety and Health Act.(OSHA)

CONTENT AND LEARNING STANDARDS

PROGRAM:AUTOMOTIVE TECHNOLOGY

COURSE NAME:WORKSHOP TOOLS MAINTENANCE

CODE NAME:MTA 101

CONTENT STANDARD

LEARNING STANDARD

PERFORMANCE CRITERIA

2. CARRY OUT WORKSHOP TOOLS MAINTENANCE2.1 Distinguish workshop tools

2.2 Maintain workshop tools2.1.1 Describe the types of workshop tools (special, measuring, fitting tools) in accordance with the workshop tools and equipment fundamental. 2.1.2 Identify the types of workshop tools (special, measuring, fitting tools) in accordance with the workshop tools and equipment fundamental.

2.1.3 Describe the usage of workshop tools in accordance with the workshop tools maintenance standards. 2.1.4 List the usage of workshop tools in accordance with the workshop tools maintenance standards.

2.1.5 Demonstrate the correct tools inventory refer to the workshop inventory standards

2.2.1 Perform tools inspection procedures in accordance with the workshop maintenance standards

2.2.2 Perform tools cleaning procedures in accordance with the workshop maintenance standards

2.2.3 Perform tools oiling procedures in accordance with the manufacturers maintenance standards

2.2.4 Perform and demonstrate tools storing procedures in accordance with the workshop management practice

CONTENT AND LEARNING STANDARDS

PROGRAM:AUTOMOTIVE TECHNOLOGY

COURSE NAME:WORKSHOP EQUIPMENT MANAGEMENT

CODE NAME:MTA 101

CONTENT STANDARD

LEARNING STANDARD

PERFORMANCE CRITERIA

3. WORKSHOP EQUIPMENT MANAGEMENT3.1 Distinguish workshop equipment

3.2 Maintain workshop equipment3.1.1 Describe the types of workshop equipment in accordance with the workshop tools and equipment fundamental. 3.1.2 Identify the types of workshop equipment in accordance with the workshop tools and equipment fundamental.

3.1.3 Describe the usage of workshop equipment in accordance with the workshop tools maintenance standard.

3.1.4 Demonstrate correct equipment inventory refer to the workshop inventory standards

3.2.1 Perform equipment inspection procedures in accordance with the workshop maintenance standards

3.2.2 Perform equipment cleaning procedures in accordance with the workshop maintenance standards

3.2.3 Perform equipment oiling procedures in accordance with the manufacturers maintenance standards

3.2.4 Perform equipment storing procedures in accordance with the workshop management practice.

CONTENT AND LEARNING STANDARDS

PROGRAM:AUTOMOTIVE TECHNOLOGY

COURSE NAME:BENCH FITTING ACTIVITIES

CODE NAME:MTA 101

CONTENT STANDARD

LEARNING STANDARD

PERFORMANCE CRITERIA

4. CARRY OUT BENCH FITTING ACTIVITIES4.1 Ensure types of metal required

4.2 Conduct material cutting

4.3 Conduct metal reference edge

4.4 Conduct layout and marking work piece

4.5 Conduct metal drilling and tapping

4.6 Conduct metal surface filing4.1.1 Describe types of metal according to the job specification4.1.2 Identify types of metal according to the job specification

4.2.1 Describe types of cutting tools according to the cutting tools fundamentals4.2.2 Identify types of cutting tools according to the cutting tools fundamentals

4.2.3 Demonstrate the correct techniques of using cutting tools and adhere to the safety regulations

4.2.4 Describe methods of metal cutting according to the cutting tools fundamentals 4.2.5 Demonstrate methods of metal cutting according to the cutting tools fundamentals

4.3.1 Describe and conduct metal reference edge according to the cutting tools fundamentals

4.3.2 Describle types of measuring tool according to the cutting tools fundamentals

4.3.3 Describe types of file according to the cutting tools fundamentals 4.3.4 Identify types of file according to the cutting tools fundamentals

4.3.5 Perform the correct techniques of metal filing to make reference edge adhere to the safety regulations

4.3.6 Practise the basic technical drawing procedures according technical drawing fundamental

4.4.1 Demonstrate the correct basic blue print drawing according to the technical drawing fundamental

4.4.2 Show methods of laying out work piece according to the cutting tools fundamentals

4.4.3 Perform the correct techniques of measuring and marking tools operation and adhere to the safety regulations

4.5.1 Identify types of drill bit, reamer and tapping tools according to the cutting tools fundamentals

4.5.2 Demonstrate the correct techniques of drilling, reaming and tapping which adhere to the safety regulations

4.6.1 Describe types of file according to the cutting tools fundamentals4.6.2 Identify types of file according to the cutting tools fundamentals

4.6.3 Identify types of measuring equipment according to the cutting tools fundamentals4.6.4 Discribe types of measuring equipment according to the cutting tools fundamentals

4.6.5 Perform the correct techniques of filing according to the cutting tools fundamentals

Module 1Document Page1/8