EPDM SILICONEADVANCED OZONE RESISTANCE tested to... 70 hour @ 500 pphm 70 hour @ 500 pphmHIGH TEMPERATURE RESISTANCETested to Intermittent +135°C (+275°F) +260°C (+500°F)

Continuous +100°C (+212°F) +225°C (+437°F)

LOW TEMPERATURE RESISTANCE tested to... – 55°C (-67°F) –74°C (–101°F)

COMPRESSION SET minimum... 25% 50%

*Complete specification data and testing methods are available upon request.

ISO Quality, Price & Availability / Two Compounds / 10 Sizes

13821 Danielson Street, Poway, CA 92064 • sales@aztecwasher.com • 1-800-WASHER 5 (927-4375) • Ph: 858-513-4350 • Fax: 858-513-4305

Since1968AZTEC W

ASHER COMPANY

To see our complete product line go to www.aztecwasher.com

“TWO FLASHINGS IN ONE”Multi-Flash is available in two compounds to handle virtually all job applications.

Weather ProtectionMade of E.P.D.M. or Silicone,these flashings are compounded specifically for maximum resistance to weathering due to ozone and ultraviolet light.

Base FlexibilityThe base is designed to mold to most panel configurations and roof pitches regardless of pipe location.

Easy On-Site CustomizationFast, one piece construction allows for easy on-site installation in usually 5 minutes.

Easy install stainless steel gripper to secure a retro custom fit. (GRIPPER INCLUDED)

Multi-Flash Master Flash®

http://www.bestmaterials.com/

“TWO FLASHINGS IN ONE”

A-Top opening diameter

B-Overall height

C-Base dimensions

A-Top opening diameter

B-Overall height

C-Base dimensions

A-Top opening diameter

B-Overall height

C-Base dimensions

A-Top opening diameter

B-Overall height

C-Base dimensions

A-Top opening diameter

B-Overall height

C-Base dimensions

A-Top opening diameter

B-Overall height

C-Base dimensions

A-Top opening diameter

B-Overall height

C-Base dimensions

A-Top opening diameter

B-Overall height

C-Base dimensions

A-Top opening diameter

B-Overall height

C-Base dimensions

STANDARD

STANDARD

STANDARD

STANDARD

STANDARD

STANDARD

STANDARD

STANDARD

STANDARD

RETROFIT

RETROFIT

(90 - 171mm)

RETROFIT3-1/2” - 6-3/4”

RETROFIT

RETROFIT

RETROFIT

RETROFIT

RETROFIT

RETROFIT

Pipe Size Compound Part No. Flashing Details

#2

#3

#4

#5

#6

#7

#8

4” - 8-1/4” (101 - 209mm)

7/8” (22mm)

2-3/4” (70mm)

6” (152mm)

Closed

3” (76mm)

8” (203mm)

2-3/4” (70mm)

4-3/4” (120mm)

10” (254mm)

4” (101mm)

4” (101mm)

11” (279mm)

4-3/4” (121mm)

4-1/2” (114mm)

12” (304mm)

5-1/2” (140mm)

5-1/2” (140mm)

14” (355mm)

6-3/4” (171mm)

5-3/4” (146mm)

17” (431mm)

#9

Maxi

9-1/2” (241mm)

5-3/4” (146mm)

25” (635mm)

12” (304mm)

7-1/2” (190mm)

34” (863mm)

A

CB

A

CB

A

CB

A

CB

A

CB

A

CB

A

CB

A

CB

A

CB

Black EPDM

Silicone

MF201BA

MF202RA

Black EPDM

Silicone

MF301BA

MF302RA

Black EPDM

Silicone

MF401BA

MF402RA

Black EPDM

Silicone

MF501BA

MF502RA

Black EPDM

Silicone

MF601BA

MF602RA

Black EPDM

Silicone

MF701BA

MF702RA

Black EPDM

Silicone

MF801BA

MF802RA

Black EPDM

Silicone

MF901BA

MF902RA

Black EPDM

Silicone

MF951BA

MF9502RA

7/8”- 4”(22 - 101mm)

1/2”- 3-1/2”(12 - 89mm)

1/4” - 5-3/4”(6 - 146mm)

2” - 4-1/2”(50 - 114mm)

2-3/4” - 7”(70 - 177mm)

2-1/4” - 6-1/2”(57 - 165mm)

4-3/4” - 10”(121 - 254mm)

4-1/4” - 9-1/2”(108 - 241mm)

5-1/2” - 11-1/2”(140 - 292mm)

5” - 11”(127 - 279mm)

6-3/4” - 13-1/2”(171 - 343mm)

6-1/2” - 12”(165 - 304mm)

9-1/2” - 20-1/2”(241 - 520mm)

9” - 20”(228 - 508mm)

12” - 28-1/2”(305 - 724mm)

13” - 27”(330 - 685mm)

SIZING CHARTCheck diameter of pipe. Select the appropriate Multi-Flash Master Flash® for pipe or duct diameter. Only use maximum pipe diameters on minimal roof angles. For extreme pitch or surface irregularity select next larger size. Then refer to the part number for the Multi-Flash Master Flash® desired.

Multi-Flash Master Flash®