multi-sensor metrology broc… · mvp provides multi-sensor metrology that will meet any general...
TRANSCRIPT
MULTI-SENSORMETROLOGY
OGP was the first to develop a co-ordinate measuringmachine (CMM) designed specifically to measure utilisingvideo technology. Since then OGP has pioneered CMMtechnology and now offers the most sophisticated metrologyplatform available.
OGP only uses the highest quality components in themachine construction in order to achieve the highest levelsof performance and reliability.
Wherever manufacturers produce the best they turn to OGPSmartScopes and use the best.
OGP IS THEUNDISPUTEDPIONEER OF MULTI-SENSORMETROLOGY.
www.ogpuk.com // 01283 585933
FUTURE-PROOF YOURPRODUCTION WITH AMULTI-SENSORSMARTSCOPE FROM OGP.
Product complexity creates challenges for today’smanufacturers as they strive to control production processes,but future innovations and component miniaturisation willconsiderably increase those challenges.
An OGP multi-sensor SmartScope is equipped to master allmeasurement requirements. Video, Touch and Laser probingcan all be deployed to carry out full 3 dimensionalmeasurement of any product no matter how complex.
All of this at the industry’s best levels of performance foraccuracy, speed and reliability.
Multi-sensor systems provide a range of additional benefits.There is no need to move components to differentmeasurement systems. As a result, inspections can be carriedout in a single programmable routine and user intervention isnot required. In addition, with only one machine, valuable floor-space is released and cost of ownership significantly reduced.
Compete today and prepare for the future with an OGP multi-sensor SmartScope.
03
www.ogpuk.com // 01283 585933
VANTAGE is the ultimate multi-sensor measuring machine.
OGP’s flagship SmartScope, VANTAGE is for manufacturers whodemand the very highest standards of accuracy, repeatability andspeed of operation. All of this in a multi-sensor system with superioroptical performance, configured for Renishaw’s advanced probing systems and incorporating unique interfrometric laserscanning technology.
VANTAGE empowers manufacturers with the integrated tools to controldimensional production processes in one high speed operation.
VANTAGE
X Y Z
FROM 300 150 200TO 610 660 400
VIDEO LASER TOUCH WHITE ROTARYLIGHT
5-AXIS
05
ZIP provides the perfect flexible solution for any futuremetrology requirement.
SmartScope ZIPs are modular systems that can be adapted, asrequired, to facilitate any number of additional sensors. As aresult they provide future-proofing with ease. Start withsophisticated video capability and add touch probes, lasersensors or rotary devices as and when needed – it’s simple,efficient and cost effective.
The flexibility of a SmartScope ZIP means you can specify for todaywith the confidence of capability for the future.
ZIP
X Y Z
FROM 250 150 150TO 800 1200 400
4-AXIS
VIDEO LASER TOUCH WHITE ROTARYLIGHT
CNCCNC is the answer for accurate, multi-sensor measurement onthe shop-floor. SmartScope CNC is designed to withstand therigours of a production environment. Components can beautomatically measured to the highest levels of accuracy in themost hostile of environments.
Multi-sensor deployment mechanisms allow for unmannedinspection and high component throughput.
For shop-floor quality control that’s accurate, fast, reliable andautomatic there’s one guaranteed solution… SmartScope CNC.
www.ogpuk.com // 01283 585933
X Y Z
FROM 200 150 150TO 1500 2000 400
VIDEO LASER TOUCH WHITE ROTARYLIGHT
4-AXIS
MVPMVP provides multi-sensor metrology that will meet any generalmeasurement application.
Designed and built to be affordable, yet without any compromisein accuracy or reliability, SmartScope MVP is a popular choicefor manufacturers worldwide.
OGP’s entry-level multi-sensor system provides best in classperformance. MVP is powered by the same advanced metrologysoftware and high-quality components as the rest of OGP’s range.
Entry level SmartScope MVP – maximum performance forminimum investment.
07
X Y Z
FROM 200 150 150TO 1500 2000 300
VIDEO LASER TOUCH WHITE ROTARYLIGHT
INDEXER
SNAP is the fastest measuring system available for in-process inspection.
Any operator can simply walk up to the SNAP, place a part on its stageand measure: quickly, easily, and accurately. The operator places a partanywhere within the generous 78mm field of view and then zooms in onfeatures with up to 50 nanometer resolution.
No need for fixtures, no need for alignment: SNAP ensures repeatabilityand reproducibility every time.
STARLITE is the manual benchtop non-contact system, backed bythe power of OGP’s software applications.
Starlite is a manually operated co-ordinate measuring machinewith fully automatic edge detection, guaranteeing accurate,repeatable results every time.
Starlite has full geometric capability but is simple to use. Operatorswith a limited amount of training can quickly get the informationthey need to prove quality.
For quick in-process checks or full component inspection, Starliteleads the way.
www.ogpuk.com // 01283 585933
X Y Z
FROM 150 75 125TO 300 300 150
VIDEO LASER TOUCH WHITE ROTARYLIGHT
X Y Z
62 47 75
VIDEO LASER TOUCH WHITE ROTARYLIGHT
STARLITE
SNAP
Without the very best software, co-ordinate measuring machinesmerely output meaningless data. OGP has produced software thatturns this data into intuitive information, from which users can makeinformed decisions about their manufacturing process.
MeasureX - measurement software which has thefunctionality to easily support standard metrology tasksincluding the automatic measurement of points, lines,planes, circles, distances, cones and spheres.
MeasureMind - 3D multi-sensor metrology software thatmakes it easy to measure your most complex parts.
MeasureMenu - the shop floor user interface for videomeasurement machines.
MeasureFit Plus - a powerful fitting package that quicklyidentifies potential assembly issues.
QC Calc - fully automatic data collection and StatisticalProcess Control (SPC) software interface for all in-processand after-process inspection.
SmartFit - a fast, accurate and reliable best-fitting andanalysis software package to solve misalignment andlocation problems.
SmartProfile - a GD&T package that takes point clouds ofdata from part measurements and merges it with thenominal CAD model of the part.
09
SOFTWARE
OUR AVAILABLE SOFTWARE INCLUDES:
SERVICE & SUPPORTOUR ISO9001:2008ACCREDITED, FACTORY-TRAINED SERVICE TEAMENSURES THAT YOU GETTHE MOST OUT OF YOUROGP MEASURING SYSTEM.
SERVICEOur service packages ensure that your OGP equipment isproactively maintained and calibrated in order to providetraceability and eliminate downtime. Should support be required,we are on-hand, to respond quickly and efficiently.
TRAININGOur structured training programmes help anyone from abeginner to an experienced quality expert to master multi-sensormetrology. We provide factory-based and in-house training toensure your team are as precise as the technology itself.
APPLICATIONSOur Applications Engineers have a wealth of experience atmeasuring any component as accurately and quickly aspossible. They are available to help you utilise your OGPmachine to the maximum.
www.ogpuk.com // 01283 585933
CONTACT USWHY NOT PUT THECHALLENGE TO US?WE ARE CONFIDENT THAT OGP CAN INSPECT ANYAPPLICATION FASTER AND MORE ACCURATELY THANANYONE ELSE.
CALL US ON
01283 585933TO FIND OUT MORE.
11
FUTURE-PROOF YOUR METROLOGY WITH A MULTI-SENSORSYSTEM FROM OGP. WHATEVER YOU MANUFACTURE NOWOR IN THE FUTURE, A SMARTSCOPE WILL MEASURE ITFASTER AND MORE ACCURATELY THAN ANYTHING ELSE.
OGP UK LtdFaraday HouseWoodyard LaneFostonDerbyshire DE65 5DJ
T: 01283 585933E: [email protected]
BS EN ISO9001:2008 // The quality management system for the supply of non-contact and multi-probe co-ordinatemeasuring machines to include installation, calibration, servicing, training and application engineering.
FM77908