multi stand for immersion heater

ABSTRACT

In the present technology so many people using immersion heaters due to warming the water

for drinking, bathing etc. At the same time the people feel very difficult to use the immersion

heater because due to sometimes plastic container will melting and sometimes it producing

electric shock also and sometimes the heater is large size and the container is small size on that

time we didn’t use immersion heater for warming water because the heater coil touches the

container and somebody uses take one wooden stick placed in the top diameter of the container

later the immersion heater is attached to that wooden stick. So on that time definitely the heater

is dipped into water. Initially the immersion heater have one stand but it is very dangerous to

hold the container due to above causes. But in this utility model to solve their technical

problems and some technical solutions is adapted and it aims to provide different advantages.

It discloses a multi-stand for holding the immersion heater without coil touches the container.

It is used for multi purposes what we need. It has various advantages to increase or decrease

the length of the stand due to varying the diameter of the container. It is easy to slide top to

bottom due to increase or decrease the height of the container. It has a varying immersion heater

hanger due to what we the place to decide. Finally it has more advantageous and it is very

useful to all the people who are using the immersion heaters and it is a remedy to solve the

above problems.

of 16

TITLE: MULTI-STAND FOR IMMERSION HEATER

INVENTOR: MUNAGA SIVA PRASANTH

ADDRESS: D.NO:18-10-5, RAMACHANDRA RAO PETA, NEAR KAMBALA TANK,

RAJAHMUNDRY-533101, EAST GODAVARI DISTRICT, A.P, INDIA

NATIONALITY: INDIAN

TECHNICAL FIELD:

[0001] The utility model discloses a multi-stand for immersion heater due to warm the

water (or) any other liquid. Without using this stand of immersion heater is not safe for a

persons, who warms the water by using immersion heater. At the present situation so many

people are very dare to use this because sometimes it can arising so many problems like

melting the plastic container suddenly current shock coming, sometimes heater is dipping into

the water, sometimes heater is large size and container is small size. These kinds of all problems

are solved by this multi-stand. It is specially designed for who are using the immersion heater.

BACKGROUND:

[0002] In any season, whenever we want the warm water for drinking, bathing and other

purposes. We have only three options 1: By using GAS. 2: By using Immersion heater.3: By

using burning of sticks, Grass and other things. Here compare to all immersion heater is the

best one compare to remaining all. Because it is cheap than using all the people, it is easy to

carry from one place to another place and it is easy to store. In India nearly 70% of people and

foreign countries also around 40% people using immersion heaters due to warming the water.

It has all advantages but the usage is difficult and the usage has some disadvantages also.

1. By using this heater due to touching of coil to the plastic container will melts day by day.

2. By using this heater due to touching the coil to metal container sometimes shock will

produce.

3. Sometimes immersion heater is large size and container is small size.

4. Sometimes immersion heater is dipping into water than automatically we lost that immersion

heater.

of 16

5. So many people using take one wooden stick and to put on the centre of the container than

immersion heater is hanged to that stick. Sometimes the stick also will broke.

[0003] By this utility model to solve above all the technical problems and this utility model is

very secure to all these things. Some technical solutions is adapted and it aims to provide all

advantages with usage also.

[0004] This stand is looking very simple and it is excellent working. Because in this stand we

used different materials in different shapes. It has a U shaped clamps used to hold the container

and it has to side rubber corks used to hold the container strongly.

[0005] This stand have two horizontal rectangular hole. One hole is due to varying the U clamp

joints due to our container diameter requirement. These joints are varying joints because it is

easy to fix the container in different diameter. Another hole is used to varying the immersion

heater hanger.

[0006] This stand have two vertical long bolts due to varying the length of the immersion heater

hanger. It is mainly used to whenever the container is small and heater is large on that time we

increase the length of the immersion heater hanger with the help of washer nuts and bolts.

Finally the use of immersion heater in very safe mode.

BRIEF SUMMARY:

[0007] The following presents a simplified summary of the disclosure in order to provide a

basic understanding to the reader.

[0008] A more complete appreciation of the present invention and the scope thereof can be

obtained from the accompanying drawings which are briefly summarized below and the

following detailed description of the presently preferred embodiments.

[0009] The utility model discloses a multi-stand for immersion heater including (horizontal

rectangular bar, bolts, nuts, washers, U shaped clamps, immersion heater hanger and oval

of 16

shaped nuts. The multi-stand for the immersion heater mainly solves all the problems who are

using this immersion heater for warm water. Without using this stand, the immersion heater is

not safe for a person who using immersion heater.

[0010] This Multi-stand for the immersion heater comprises a horizontal rectangular bar.

The rectangular bar consists of two rectangular holes and one circular hole. One U clamp is

fixing on that Circular hole so it is called fixed joint. The purpose of that U clamp is to hold

the container on one side.

[0011] One another U clamp is fixed to one rectangular hole present in the top side of the

horizontal rectangular bar, so it is called varying joint. The purpose of this U clamp is to hold

the container on another side. Here the varying joint is mainly used to increase or decrease the

diameter of that stand. It is depend upon the container size.

[0012] By fixing that U clamps in their respective holes with the help of long size bolts,

washers and nuts. Here the u clamp the main purpose of long size bolts is to attach the U clamp

in to that stand and another purpose is to slide the horizontal rectangular bar from up and down.

[0013] The sliding of horizontal rectangular bar main purpose is sometimes the container is

small but the immersion heater doesn’t change the length. So on that time by using this multi-

stand we can raise the horizontal rectangular bar without raising the U clamps.

[0014] In this ‘circular hole U clamp’ on that left side one sliding rubber cork lever is available.

At the same time of that ‘rectangular h

[0015] ole U clamp’ on that right side one another one sliding is available. The main use of the

rubber corks is told the container very tightly without slipping the container.

[0016] Here one another rectangular hole present in the front side of that horizontal rectangular

bar. It is used to varying the immersion heater hanger due to depend upon the container size.

At any time it always placed in the centre position of the container. Otherwise coil will touches

the container.

[0017] The oval shaped nuts are mainly used to reduce the sharpness at the bottom circular

edge of the bolt.

of 16

BRIEF DESCRIPTION OF THE DRAWING:

[0018] Other objects and advantages of the present invention will become apparent to those

skilled in the art upon reading the following detailed description of the preferred embodiments,

in conjunction with the accompanying drawings, wherein like reference numerals have been

used to designate like elements, and wherein:

[0019] FIG. 1 is a diagram illustrating a assembling of bolt, u clamp, nut, washer, oval shaped

nut.

[0020] FIG. 2 is a diagram illustrating a assembling of rubber cork lever, U shaped clamp and

nut.

[0021] FIG. 3 is a diagram illustrating a front view of the multi-stand.

[0022] FIG. 4 is a diagram illustrating a multi stand placed in multi positions and attached with

container.

[0023] FIG. 5 is a diagram illustrating a top view of the multi-stand.

[0024] FIG. 6 is a diagram illustrating a bottom view of the multi-stand.

[0025] FIG. 7 is a diagram illustrating a left side view of the multi-stand.

[0026] FIG. 8 is a diagram illustrating a right view of the multi-stand.

DETAIL DESCRIPTION

[0027] It is to be understood that the present disclosure is not limited in its application to the

details of construction and the arrangement of components set forth in the following description

or illustrated in the drawings. The present disclosure is capable of other embodiments and of

being practiced or of being carried out in various ways. Also, it is to be understood that the

phraseology and terminology used herein is for the purpose of description and should not be

regarded as limiting.

[0028] Specific Embodiments:

• Horizontal rectangular bar 101.

• Top horizontal rectangular hole 102.

• Front horizontal rectangular hole 103.

• Bolts 104.

of 16

• Nuts 105.

• Washer 106.

• U shaped clamps 107.

• Immersion heater hanger 108.

• Rubber cork lever109.

• Oval shaped nuts 110.

• Circular hole 111.

• Small bolt and nut 112.

• Container 113.

[0029] The Multi-stand is made of different materials. As our wish we should design different

shapes with different dimensions. It can be assembled and dissembled easily with in very less

minimum time.

[0030] In FIG 1, a horizontal rectangular bar 101 and bolts 104. One of the bolt 104 is attached

to U shaped clamp 107with the help of washer 106, nut 105. After that these both are attached

to into horizontal rectangular bar 101 through top horizontal rectangular hole 102. Take another

bolt 104 it is also attached to U shaped clamp 107with the help of washer 106, nut 105. After

that these both are attached to into horizontal rectangular bar 101 through top horizontal

rectangular hole 102 after that these bolt end points are fitted by oval shaped nuts 110.

[0031] Here top horizontal rectangular hole 102 is mainly used to varying the U shaped clamp

107 due to depend on the diameter of the container 113.

[0032] In FIG 4, here horizontal rectangular bar 101 is easily to slide top to bottom with the

help of top horizontal rectangular hole 102, washer 106 and nut 105. Due to whenever the

container 113 is small and immersion heater is large on that time the coil touches the container

113. So we have to slide up the horizontal rectangular bar 101 than ready and easy to use.

[0033] In FIG 2, a rubber cork levers 109 and U shaped clamps 107. One rubber cork lever

109 is attached to the left side of one U shaped clamp 107 with the help of circular hole 111.

Another rubber cork lever 109 is also attached to the right side of another U shaped clamp 107

with the help of circular hole 111.

of 16

[0034] In FIG 3, an oval shape nuts 110 are fixed to the end point of the bolts 104 due to reduce

the sharpness of the end of the bolt 104.

[0035] In FIG 7 and FIG 8, an Immersion heater hanger 108 is attached to the front rectangular

hole 103 with the help of small bolt and nut 112. Here the immersion heater hanger108 is

mainly used to hold the immersion heater. Here front rectangular hole 108 is used to hold the

immersion heater hanger 108 and it can helpful to sliding (to and fro) directions of the

rectangular bar 101 due to its bottom of the coil cannot touches to the sides of the container

113.

of 16

CLAIMS:

What is claimed is:

1. U shaped clamps 107 are used to hold the container 113 and these U shaped clamps 107

are varying from one place to another place in both horizontal and vertical directions

with the help of top horizontal rectangular hole 102. U shaped Clamp 107 is designed

by U, V, T, multiple polygonal shapes.

2. Bolts 104 are attached to the U shaped clamps 107 (claim 1) and horizontal rectangular

bar 101 with help of washer 106, nuts 105 and bolts 104 (or) welding also. Bolts 104

are made by different materials steel, plastic etc.

3. Rubber cork lever 109 are attached to sides of the U shaped clamps 107 (claim 1) to

tight the container 113 with the help of circular holes 111.

4. Horizontal rectangular bar 101 is with stand by bolts 104, screws, T, L, multiple

polygonal shape joints etc.

5. Immersion heater hanger 108 are used to hold the immersion heater and it is varying

from one place to another place in horizontal direction with the help of front horizontal

rectangular hole 103. Immersion heater hanger 108 has made by polygonal shapes.

6. Oval shape (like parabola, ellipse, hyperbola etc.) nuts 110 are used to reduce the

sharpness of the end points of bolts 104.

of 16

multi stand for immersion heater

Small Business & Entrepreneurship