multifit hospital supplies catalogue 2011

Multifit Hospital Supplies Ltd, Ph 0800 102 803, Fax 0800 102 800, e mail : [email protected], website: www.multifit.co.nz 10 Pohutu Street, P.O. Box 748 Whakatane

20

11

Multifit

Frustrated with a low seat? We have the perfect solution!

Installing a MULTIFIT CHAIR RAISER will lift your chair to the ideal seat height that makes standing easier. Fitting a Chair Raiser is one of the EASIEST, simplest things that you can do to make a BIG IMPROVEMENT to your INDEPENDENCE AT HOME. Safe, Portable Easy to install Cost effective See our common list equipment inside.

Leg lifter lifts your legs right onto your bed

380kg Max Chair + user weight S

Multifit © February 2011

Index

Product Code Page Product Code Page

Chair raisers Bathroom

Mini std chair raiser MF 1/0 2 Shower remote A MF 6/3A 9

Std chair raiser MF 1/1 2 Shower remote B MF 6/3B 9

Extra large std chair raiser MF 1/2 2 Neptune bathlift MW N 7

Lazy boy chair raiser MF 1/3 2 Aquila reclining bathlift MW A 7

Big softie chair raiser MF 1/7 2 Bathing cushion MG BC 7

Pedestal chair raiser MF 1/ped 3 Toilet lift MW TL 8

X chair raiser MF 1/X 3 Surfer bather MG A/4 7

Open Front Chair Raiser MF OF 4 Excellent Ramps 10

5 Legged chair raiser MF 1/Q 3 Shower Insert MF SI 10

Chair rails Other

Double chair side transfer rail MF 1/9D 11 Assessment hand rail MF 11/1 10

Single chair side transfer rail MF 1/8 11 Temporary step MF 14/1 9

Handy Bar MF HB 9

Sofa raisers Adjustable Height Desk MF AHT 9

Sofa raisers MF 2/1 2 Excellent System Ramps 10

Divan sofa raisers MF 2/5 4 Camel lifting cushion MF CLC 8

ELK Emergency Lifting Cushion MG C/1 8

Bedroom

Bed block ( 50 mm or 2" ) MF 0/1 3




Single bed raiser MF 2/2 4

Divan single bed raiser MF 2/2D 4

Double bed raiser MF 2/4 4

Divan double bed raiser MF 2/4D 4 Bed Lever standard MF 3/1A 5

Bed rail double handled MF 3/1D 5

Bed Lever—100kg MF 3/11 5

Cord & cleat fixing MF CC 5 Strap & buckle fixing MF SB 5

Bed stick MF 3/2 5

Wire wove bed rail MF 3/3 5

Leg lifter Mk3L MF BLR Mk3L 6

Handy pillow lift MG B/2 6

Sit U Up pillow lift MG B/2.1 6

Bed Side Transfer Rail MF BTR 11

Battery Powered Bed Jack MF BJ/Bat 8

Profiling bed transfer rail MF ETR 11

Multifit Page 1

380kg Max Chair + user weight S

Guarantee Delivery within 5 working days or we will shout your

whole OT department morning tea, excludes customised

items

The equipment will fit or we will customise one that will.

The equipment will retain its original function for at least 2

years or we will replace it free of charge

Standard chair raiser (MF 1/1)

Lazy boy chair raiser (MF 1/3)

Multifit Page 2

Sofa raiser (MF 2/1)

Big softie chair raiser (MF 1/7)

Suits most rocking / recliner chairs that have a steel base frame similar to the one pictured. • INCREASED STABILITY: splayed feet widen the base of the raiser to increase stability. • HOLDING THE RAISER TO THE CHAIR: we have designed two cords and cleats at the rear of the raiser to hold the raiser firmly in place.

The Multifit Sofa Raiser fits any standard Sofa that has legs, glides or castor wheels. The self bracing blocks are linked with a telescopic section that clamps solidly to the width you desire, providing a stable and safe system of raising any standard Sofa.

Min / max adjustment 485 x 530mm / 710 x 885mm

Heights available 50, 75, 100 & 150mm

Suits Lazyboy chairs which have a wooden base frame similar to the one pictured.

INCREASED STABILITY: splayed feet widen the base of the raiser to increase stability.

HOLDING THE RAISER TO THE CHAIR: The rocking and reclining action can cause the chair to come off a standard raiser. So we designed two clamps at the rear of the raiser to hold the raiser firmly in place.

Designed to suit most square shaped lounge chairs similar to the one pictured. The sides adjust to fit the size of your chair. Note: relocate the bolt to achieve a larger size.

Standard - (MF 1/1) Min/max adj 528 x 483 / 873 x 816

Mini - (MF 1/0) Min/max adj 385 x 435 / 500 x 645

Min/max adj 680 x 628 /1020x 956 Extra Large - (MF

1/2) Max user 380kg over four feet

Heights 50, 75, 100,150mm

Max user weight 380kg over four feet

Min / max adjustment 485 x 530mm / 710 x 885mm



Min / max adjustment 624 - 900mm


Lip around the foot pad 20mm high

Foot pad size 90x90 other sizes on request

S

S

S

S

Multifit Page 3

Pedestal raiser (MF1/ PED)

Standard heights 50, 75, 100 & 150 mm

Non slip rubber pads 90 mm square

Size adjustment 645 x 645 - 900 x 900mm

X Chair raiser (MF 1/X )

Adjusts in length so you get a perfect fit every time. Made from furniture grade timber and colour coated sheet metal for long lasting good looks. Simply adjusts by hand so you won't need any tools. Prefinished surfaces make cleaning easy and hygienic.


Clips around the pads 20mm high

Size adjustment 530 - 620mm ( 700mm if you remove then reinstall the rim clips)

Adjusts in diameter so you get a perfect fit every time. Splayed feet on the raiser in-crease stability. Made from furniture grade timber and colour coated sheet metal for long lasting good looks and ease of cleaning.

Bed blocks Code Height of bed

block

MF 0/1 50mm

MF 0/2 75mm

MF 0/3 100mm

MF 0/4 150mm

Light weight bed block with a finger hole to make them easy to carry. Durable construction means they can be reused over and over while maintaining in excellent condition. Pyramid shape means that they are self bracing & stable. Sealed surfaces mean cleaning is made easier. Professionally tested to ensure your safety.

Max user weight

380kg over four feet

Cup recess 75 x 75 x 40mm deep S

5 Legged chair raiser (MF 1/Q) The 5 legs of the raiser adjust out to fit the length of the leg on the chair. There are cords on three of the raisers pads which can be looped over the legs of the chair then secured down into a self locking wedge cleat on the other side of the pad. This holds the chair safely on the raiser

Size adjustment Radius 330 - 420mm

Pad size 90 mm square

Std heights 50, 75, 100 & 150 mm

Divan style raisers

Single bed raisers (MF 2/2)

Multifit Page 4

Available in sets of : 2 or 3

Min / max adjustment 1150 - 1700mm


Non slip rubber pads 90 x 90mm

Rim around the pads 20mm high

Open front chair raiser (MF 1/OF)

Double bed raiser (MF 2/4 )

The linked blocks increase stability and safety of the raised bed for your client and are much easier, safer & quicker for you to fit than standard bed blocks. Also made in the divan style (see pics above)


Lip on the corners 20mm high

Width adjustment 500 - 700mm

Length adjustment 620 - 905mm

The front edge of this raiser is recessed, which allows you to get your feet further under the edge of your chair. This means that you don’t have to slide as far forward to get your body weight over your feet to stand. You can also make better use of the arm rests on the chair.

Available in sets of : 2 or 3

Std heights 50,75,100 & 150 mm


Cup recess 90 x 90 x 20mm deep

Min / max adjustment 824 / 1100mm

The linked blocks of the single bed raiser increase stability and safety of the raised bed for your client and are much easier, safer & quicker for you to fit than standard bed blocks.

S

Divan raiser type Code Std heights Available in sets of :

Sofa raiser MF 2/5 50,75,100,150 mm 2 or 3

Single bed raiser MF 2/2 D 50,75,100,150 mm 2 or 3

Double bed raiser MF 2/4 D 50,75,100,150 mm 2 or 3

Suits sofas or beds that do not have legs, glides or castor wheels. The foot pad has two lips on the edge that allow the sofa or bed to sit into the foot pad. Self bracing blocks are linked with a telescopic section that clamps to the width you desire and a cord links the two raisers together.

Professionally Tested to ensure your safety

S

Multifit Page 5

Bed stick ( MF 3/2)

Wire-wove bed rail (MF3/3)

S

Max user 100kg

Height of rail 570mm

Upright Dia 38 mm

Knob Dia 70mm

Strap & buckle MF3/2SB

Cord & cleat MF 3/2CC

Max user 150kg

Height of rail 470mm

Handle Dia 26 mm

Width adjustment

760 - 1150mm

Finish Powder coated

These Bed Rails are connected with a telescopic section that clamps to the sides of the wire wove bed frame. The rails extend up each side of the bed and provide a very stable hand hold. NOTE : For resistance to head entrapment all Multifit rails can be fitted with the“ Safe Rail Divider” on request

Timber finish blends in with existing furniture.

Wider base for rigidity and strength

Graspable from all angles

Taking up less space at your bedside.

Clear finished ensures easy hygienic cleaning.

Bed lever Double handled (MF 3/1D)

S

Extra handle is very useful for helping clients turn in bed

Can be used on SLAT BEDS as well as INNER SPRUNG BEDS

Safe for bariatric use with improved stability and new16 mm base.

Tested for strength to ensure your safety. Optional on request “Safe Rail Divider” which

resists head entrapment. Code (SRD) Strap & buckle

Cord & Cleat

Optional fixing Code

Strap & buckle MF3/1DSB

Cord & cleat MF3/1DCC

Max user 150kg

Height of rail 550 mm

Dia of rail 26mm

Bed lever standard (MF 3/1A)

S

Can be used on SLAT BEDS as well as INNER SPRUNG BEDS Extremely strong for extra stability. Safe for bariatric use with improved stability. Improved stability with NEW16 mm base. Tested for strength to ensure your safety. Optional on request “Safe Rail Divider” which

resists head entrapment. Code (SRD)


Strap & buckle MF3/1ASB

Cord & cleat MF3/1ACC

Max user 150kg


Dia of rail 26mm

Bed Lever - 100 kg (MF 3/11)

S


Strap & buckle MF3/11SB

Cord & cleat MF3/11CC

Max user 100kg


Dia of rail 26mm

This new design has improved resistance to sideways movement of the Bed Lever while fitted to the bed. This greatly enhances the steadiness of the rail helping your client to feel safer and more confident. Fits to inner sprung beds, slat beds and some profiling beds. Optional on request “Safe Rail Divider” which

resists head entrapment. Code (SRD) S

NEW with enhanced stability

Leg lifter (MF BLR Mk3L)

Handy pillow (MG B/2)

Max user weight 135kg Weight of pillow lift 2kg

A neat uncomplicated air filled pillow lift which elevates the user into a seated position at the touch of a button to provide excellent back support. The Handy Pillowlift is operated by low air pressure using the Airflo power source.

Designed to provide independence for elderly and disabled people who are unable to lift their legs from a bedside sitting position onto the bed. Easy to use, smooth silent action.

Adaptable for domestic and profiling beds.

Installs in minutes, portable and compact.

Designed with your safety in mind.

Moulded handle assists with transferring on and off your bed.

Max user weight ( n/a ) If your legs fit on the Leg Rest it will lift your legs

Width of Leg Rest Standard - 280mm Large - 500mm

Weight of Leg Lifter 12 kg

Leg Lifter dimensions L 1050mm, H 660mm, W 60mm

Height adjustment 450-650mm / goes up & down with profiling beds

Max user weight 150kg Weight of pillow lift 2kg

A flexible, soft padded back rest that can be controlled at any angle, to sit you up in relaxing comfort at the touch of a button. This is an uncomplicated simple to use aid to raise and lower a person in bed. Operated by low air pressure using the Airflo power source.

Sit U Up (MG B/2.1)

2

3

1

With Hospital bed clips the leg Lifter can easily fit onto the Etude Scan bed and most other profiling beds.

Fitted to an inner sprung or slat type bed

2

Optional Transfer rail Assists with standing & sitting up from your bed.

1

CODE Right hand CODE Left hand

MK3LLTRR MK3LLTRL

Extends out from the bed

276mm

Rail height from the mattress

427mm

NOTE : Left & Right hand models MK3L Leg lifter fitted

with a large Leg Rest and small leg rest

Bathing cushion

Surfer bather (MGA/4)

Multifit Page 7

A powered elevating bath lift for children, which minimises moving & handling risks to therapists, parents and carers alike. The bathlift is operated by low air pressure using the Airflo power source.

(MG /BC) The Bathing Cushion is simple to use lowering you gently to the bottom of the bath. Once there you can choose whether to leave a small amount of air in the cushion to act as a back support, or release all the air to lie right back and bathe as normal. When you have finished your bath, the Bathing Cushion can be re-inflated using our Airflo compressor to lift you steadily back up level with the top of the bath.

Max user weight 50Kg

Max user height 135mm

Over all length / width 1140 / 410mm + flaps

Max / min height 60 / 430mm

Weight of bather - 4.4 kg platform, 5.5kg scissors

Neptune bathlift (MW/N) Can be used in Spa baths & Shubs

The Neptune’s unique design allows fitment in almost any style of bath, making it a highly versatile and great all-round bath lift.

Max user weight 160kg

Min / Max height 70/435mm

Weight of bathlift 9.6kg

Fixed backrest means it can be placed further back in the bath giving you more leg room

Aquila reclining bathlift

(MW/A) Light weight (9.6kg) so

its easy to place and remove from your bath. Paediatric accessories available. Optional padded cover.

Maximum user weight 150kg

Seat height ( min/ max ) 20mm / 400mm

Weight of bathing cushion 2kg

Max user weight 140kg

Back rest height 676mm

Seat width incl flaps 718mm

Seat base 6kg, back rest 3.6kg

http://www.mangarinternational.co.uk/uk/products/Accessories/product/Airflo.aspx

http://www.mangarinternational.co.uk/uk/products/Accessories/product/Airflo.aspx

Camel lifting chair (MG CLC)

Elk lifting cushion

Toilet lift ( MW TL)

Battery powered bed jack (MF BJ/bat)

Multifit Page 8

Max user 160kg Overall width with arms - 710mm

Weight of Toilet lift 17kg Bowl clearance width - 390mm

The Mountway Solo Toilet Lift is a functional, unobtrusive solution to toilet-ing independently. The slimline, battery-powered lift mimics a natural standing movement, gently lowering and raising the user on and off the toilet at the simple touch of a button.

( for more detailed information on any of our products go to our website www.multifit.co.nz )

Number of lifts on full battery - 50

Lift Stroke 20 - 600mm

Width 210 / 870mm

Lifting ability 250 kg

Weight of jack 7kg

Reduce Manual Handling risks when fitting bed raisers. Simply place the foot of the jack under the edge of your bed and push the button to raise or lower your bed. Latest improvements are : Wheels for better portability, lengthened lift plate so it reaches further under the bed, new battery housing and switch making them both more robust. ( for more detailed information go to our website www.multifit.co.nz and down load a brochure on this product )

1

2

3

1 2 3

Particularly suitable for very large or bariatric people, the Camel inflatable lifting chair is designed to sit up and lift a fallen and uninjured person from the floor either independently or assisted. It is less hassle than a hoist and is operated by low air pressure compressor.

1 2 3

Maximum user weight 320kg

Inflated seat height 560mm

Inflated width 700mm

Rolled up weight 6.5kg

Max user weight 450kg 570mm Inflated width

Inflated seat height 565mm 3.6kg Rolled up weight

(MG C/1) The Elk emergency lifting cushion lifts a fallen but uninjured person. simply and safely minimising moving, handling and transfer risks. The Elk is used and recommended by many UK NHS Ambulance Trusts as key equipment to lift a fallen person. Operated by low air pressure Compressor.

Shower remote (MF 6/3A & MF 6/3B)

Adjustable height desk

Multifit Page 9

Standard size table 800 Wide x 1800 Long

Height adjustment from 625 - 1300 mm

Temporary step (MF 14/1)

Handybar

.Use outside or inside your clients home . Adjustable height feet so you can get it level

Raise the step or build up a porch.

Non slip top adds safety.

Solid construction adds stability.

(MF HB ) Provides an additional handhold when getting in or out of your car, truck

or van. Simply insert Handybar into the door latch U-shaped striker on the door frame. The U-shaped striker supports the Handybar while the handle extends out from your car providing you with an additional handhold, making transfers safer and easier.

Made to measure desks, that make every day office duties more accessible for those with disabilities. Optional :

Adjustable angle key board support gives you added room when sitting upright and when tilting back in your wheel chair.

Reshaped desk support that enables extra room for your feet. Really helpful if you are in a wheel chair with foot supports.

Desk cut out allows the user to get closer into the desk.

S

Locate U shaped striker Insert Handybar into the striker

This is an adaptation to the Felton type shower mixer lever, that enables your client to turn the shower on and off from a lower position.

Type A ( MF 6/3A) will fit the standard shower cubicles only, as the remote needs to be screwed into the wall/timber framing. The advantage with this model is that the water can be turned on and off using one hand, and with more accurate adjustment of the hot /cold water.

Type B ( MF 6/3B) is more suited to the fibreglass cubicles, but requires a two handed operation as the remote is not fixed to the wall.

The B model takes less time to fit and requires no tools.

NB : ONLY FITS TO THE FELTON BRAND OF SHOWER MIXER

Standard size 800 L x 400mm D

Height adj from 100 — 150mm

Modular Ramp Solutions you can quickly, economically and easily assemble to the size ramp you need. No obstacle is insurmountable and the ramp modules can be taken apart and reassembled again and again to fit any situation - limited only by your imagination!

Can be assembled to fit any opening, door step or platform - regardless of shape,

Can be dismantled and reused at another location or rebuilt into totally new ramps

Non-slip surface indoor and out side use

Non-permanent structure can be easily removed. With aluminum opening in doors a light weight ramp portion can easily be laid in place to for a continuous ramp over the door sill.

Turns your shower cubicle into a level access shower

Cost effective solution compared to major bathroom alterations.

Non slip surface for improved safety.

300 x 300mm center plate removes to enable cleaning of the shower waste.

Portable means it also suits rental homes.

Short supply time ( 2 - 3 weeks ).

Gaps around the edge and holes along the entrance of the shower insert allow drainage of the shower water.

Excellent ramp provides access to the shower insert .

Shower Insert (MF SI)

Excellent Ramps

Page 10

Height Width

Ramp Kit 1 up to 40 mm 750 mm




Assessment Handrail (MF 11/1) Not intended for the support of a person but great for assessments of where best a permanent rail should be fixed. Try different angles and positions. It works well on table tops or even on the fridge door. Sucks onto most smooth surfaces with no tools required. Just place firmly against any flat smooth nonporous surface and press down the black levers to activate suction.

Size of handle 95mm long x 32mm dia

Colour Yellow

Guarantee Delivery within 5 working days or we will shout your

whole OT department morning tea, excludes customised

items

The equipment will fit or we will customise one that will.

The equipment will retain its original function for at least 2

years or we will replace it free of charge

Multifit Page 11

Chair side Transfer Rail

Bedside Transfer Rail

Use as a handhold for rolling over in bed and sitting up from your bed . A handrail extends out from the bed that you can use to pull yourself out of a wheel chair, or steady yourself when transferring from a walker, or as a standing frame so a care giver can help with dressing.

New telescopic base allows the rail to be fitted to any length bed. Two steel plates fit under the legs of the bed front and rear and are joined by a telescopic section. The hand rail fits into this base providing your client with a really solid handrail.

Code Right hand side ( MF BTR/R )

Code Left hand side ( MF BTR/L )

Rail 810 mm high, 600mm wide 32mm dia

Max user 130 kg

This rail can assist with independent access in and out of your chair. The rail extends up the side of the chair and the top part of the rail can be adjusted to a height that suits you best. The base of the rail extends under your chair to give stability. Works with most chairs including recliners.

Code - hand rail both sides MF 1/9D

Code - left hand side MF 1/8L

Code - right hand side MF 1/8R

Max user 130 kg

Rail diameter 32 mm

Rail adjustment There are 6 height options

Profiling bed

Transfer Rail

The rail extends perpendicular from the bedside to provide a handhold in front of the seated person. This assists with bal-ance as they move forward, getting their weight over their feet and assists with standing. The rail is very strong stable rail in all directions. It fixes to both side rails of the bed with the use of Allen key bolts. Symmetrical design allows the rail to be fitted to either left or right hand side of the bed.

Code MF ETR Extends out 300mm

Rail dia 25mm Rail Height 530mm

Max user 130kg

multifit hospital supplies catalogue 2011

Documents