Issue 2 DATA sHeeT D40 Product improvement is a continuous process. Please check specification at time of purchase.

ApplicationSuitable for residential and light commercial folding partitions.

Panels can be either end folding or centre folding.

Panels can fold to one or both sides of the opening.

Pivot hardware enables an end folding internal partition to be designed using standard width door panels with no need to reduce the width of the panel adjacent to the jamb.

Door SpecificationMultifold 30

2400mm30kg650mm19mm

Contents 2 panel track set include - 1300mm top track, top pivot assembly, bottom pivot, wall bracket, hanger, bumper, spanner, 3 x hinges, all screws and fitting instructions.

Track System:For Individual Panels:Max Panel HeightMax Panel WeightMax Panel WidthMin Panel Thickness

The folding unit is not hinged to a jamb, but is pivoted in the track and on theadjustable jamb bracket.End folding units of two, four, six or eight panels can be pivoted to each side ofthe opening.Centre folding units of one, three, five or seven full width panels and one “half”width panel can be pivoted to each side of the opening.A guide system across the floor must be used on end folding units of four panelsor more in excess of 450mm wide or 15kg per panel.Instructions on panel width calculation is shown overpanel. Door panels shouldbe constructed to provide secure fitting for the pivots, hangers, hinges andguides and can be either flush, panelled or of louvre construction.

Multifold 30 For Top Hung Interior Folding Partitions. Max 30kg Each

Standard Fitting Packs and Sets

60Aluminium, Mill2000mm, 3000mm, 4000mm and 6000mm

60Ds Rubber and steel, zinc dichromated818 Zinc dichromated steel and nylon802 Zinc dichromated steel and nylon805 Zinc dichromated steel and nylon806 Zinc dichromated steel and nylon605 Zinc dichromated steel and nylon body

822Z Steel, in zinc dichromate, non mortice hinge805-SPN Steel, in zinc dichromate finish91

92, 130 and 801

401360

Hardware SpecificationTrack MaterialStandard Lengths

BumperTop Pivot Assembly:Bottom Pivot:Floor Bracket - adjustable:Wall Bracket - adjustable:Hanger: The hanger is fitted with four nylon tyred ballrace wheels. The adjustment bolt isattached to the top plate and secured in place with a locking clip which allowseasy installation.Hinges:Spanner:Bracket:Bracket made from stainless steel and supplied with matching fasteners. Available singularly or in pack of 5, reference 91/5.Threshold and Guide:92 & 130 threshold, aluminium, available in the same lengths as 60 track801 guide – spring loaded – in nylon and zinc dichromate steel.Accessories:Flush Pull - with deep gripFlush Bolt - with flat shoot

Set No. MF30-13/2

Contents 2 panel pack4 panel pack6 panel packAdd-on 2 panel pack includes - one hanger, six hinges and all screws. For each folding unit, select one MF30-2PK basic pack, sufficient MF30-APK add-on fitting packs and a suitable length of 60 track (see below) to cover the width of the opening.

Pack No. MF30-2PKMF30-4PKMF30-6PKMF30-APK

No. 91 BRACKET

No. 605 HANGER

No. 818 TOP PIVOT

No. 805-SPN SPANNER

No. 802 BOTTOM PIVOT

No. 805 FLOOR BRACKET

No. 806 WALL BRACKET

No. 822Z HINGE

No. 60DS DOOR STOP

No. 92 THRESHOLD

No. 130 THRESHOLD

No. 801 GUIDE

No. 91 BRACKET

No. 605 HANGER

No. 818 TOP PIVOT

No. 805-SPN SPANNER

No. 802 BOTTOM PIVOT

No. 805 FLOOR BRACKET

No. 806 WALL BRACKET

No. 822Z HINGE

No. 60DS DOOR STOP

No. 92 THRESHOLD

No. 130 THRESHOLD

No. 801 GUIDE

®

Basic packs include - top pivot assembly, bottom pivot, wall bracket, hanger(s), bumper, spanner, set of hinges, all screws and fitting instructions.

DATA sHeeT D40B

Multifold 30 For Top Hung Interior Folding Partitions. Max 30kg Each

32

28

43 to 49

No. 605HANGER

ALTERNATIVE BOTTOM GUIDE & PIVOT SYSTEMS

6 1 1 1 6

BOLTS AND PULLS BOLTS AND PULLS

6 1 1 1 1 6

4 LEAF UNITEND FOLDING

5 LEAF UNITCENTRE FOLDING

½

D40B

ALTERNATIVE HEADDETAIL

BRACKET QUANTITYREQUIRED FOR TRACKLENGTHS:

LENGTH

90012501700210025003000380551056000

QUANTITY

4578

1012151923

No. 91 BRACKET

No. 60DS DOOR STOP

43 to 49

32

28

No. 818TOP PIVOTASSEMBLY

DOORHEIGHTEQUALSFINISHEDOPENING

HEIGHTLESS 54

MIN

SECTIONSCALE 1:1

11 MIN.NO GUIDE

No. 802BOTTOMPIVOT

19 MIN.

No. 805 FLOOR BRACKET

No. 805 FLOOR BRACKET

9

No. 802BOTTOMPIVOT

16 MIN.WITH GUIDE

No. 801 GUIDE-SPRING LOADED

No. 92THRESHOLD

*25

NOTE: SYSTEMS USING 801 GUIDEWITH DOOR WIDTH LESS THAN 22mm*25 MUST BE 28mm.

No. 282 HINGE

No. 60TRACK No. 282 HINGE No. 605 HANGER

No. 818 TOP PIVOTASSEMBLY

6 25

650 MAX.

EQUAL EQUAL625

VIEW FROM INSIDE CENTRE FOLDING DOOR VIEW FROM INSIDE ENDFOLDING DOOR

No. 60DSDOOR STOP

No. 802 BOTTOM PIVOTNo. 806 WALL BRACKET (SUPPLIED IN PACKS & KITS)

Ø11

33

13 11

Brio is a division of RMD Industries brio.com.au

®