multifunction power meter product catalogue

Shenzhen Huayansheng Electron Co.,Ltd Shenzhen Huayansheng Electron Co.,Ltd www.szhyes.comwww.szhyes.com 8686--755755--3358165233581652


CertificationCertification


Smart Industrial Power Measuring InstrumentSmart Industrial Power Measuring Instrument

Energy MeterEnergy Meter

Humidity and Temperature ControllerHumidity and Temperature Controller

Wireless Measuring InstrumentWireless Measuring Instrument


Applied for monitoring and controlling of the electrical systemAnalyze real time data, such as U, I, P, Q, S, COSΦ, F, kWh, kVAr, etc

Technical Parameters:Input Current: 5A (Current value can be set up)Measurement scope: 0.5%～120%Overload capacity: 2 X rated continuously, 100A/1s non continuouslyPower consumption: ≤0.2VA per phaseInput Voltage: 400VAC (L-N), 693VAC(L-L)System frequency: 45~65Hz Measurement scope: 3%~120%Overload Capacity: 2 X rated continuous, 2500V/1s non continuousPower consumption: ≤0.5VA per phaseAuxiliary Power: 85~265VAC/DC Used DC power, as23is+, as24is-Luminosity can be adjusted Storage Capacity: 2GBTemp. drifting factor: <100PPM/℃Withstand Voltage (Input against output): 2500V/1 minTotal power consumption: <8VAOperation temperature: -20℃～60℃Storage temperature -40℃～85℃Operation humidity: 5~95％ RH Pollution Class: Class 2Material of Housing: Flammability acc. to UL94V0Wire connection: 3P3L,3P4L,1P2L,3P3B,3P4B

LCD Multifunction Power meter MPM8000LCD Multifunction Power meter MPM8000


Auxiliary Module for MPM8000Auxiliary Module for MPM8000

8 remote signals input module: 8 source free remote signals input channels, each channel can be set up separately to check the outside on-off status. Detail setup can be finished through the key on the meter and upper computer. The function of up per read SOE (Sequence of events) by connecting the SOE interface which record accurately the status and detail time of events.

Programmable 4 electric relay outputs module: This module has 4 separate electric relay output channels, which can be set up separately to corresponding different electricity parameter’s automatic model and manual model which can be o perated by upper computer. Associated automatic alarm function can trigger event to record the present power system status; without alarm, the 4 electric relay will normally keep open.

Programmable 4 analog outputs module: This module has 4 analog output, voltage or current model optional. Output adopts 4 channels same negative terminal format, each channel corresponding separately to different electricity parameter. Current is:（4-20）ma output，voltage is:（0-5）V output.

SD card data storage module: Adopted advanced high-capacity internal storage SD card to store electrical measur ement parameter at real time; and store the data for a given period of time. The data can be educed and analyzed by upper computer, internal storage of SD card is optional.

Harmonic analysis module: It can display each measured information of the harmonic, and feedback the electric h armonic parameter, including（2~63 times）harmonic content; phase angle etc. measured information.

Ethernet communication module: It can connect to Ethernet by RJ45, and read electrical measurement by remote

access. Adopted 10M and 100M self-adaptation model.（Default IP address is:192.168.0.250; Local port 27011）

Profibus communication module: The meter can Network through Profibus communication Protocol terminal,

fully complied with Profibus-DP Communication Protocol.


Applied in secondary measure in high and low voltage electrical system.RS-485 communication port (MODBUS Protocol), Max/min data record, analog output, digital signal input, and multi-tariff function ect.Technical Parameter:Input Current: 5A (Current value can be set up)Measurement scope: 0.5%～120%Overload capacity: 2 X rated continuously, 100A/1s non continuouslyPower consumption: ≤0.2VA per phaseInput Voltage: 400VAC (L-N), 693VAC(L-L)System frequency: 45~65Hz Measurement scope: 3%~120%Overload Capacity: 2 X rated continuous, 2500V/1s non continuousPower consumption: ≤0.5VA per phaseAuxiliary Power: 85~265VAC/DC （30VDC is optional）Display type: LED display Operation type: Key or software operation Temp. drifting factor: <100PPM/℃Withstand Voltage (Input against input/output): 2500V/1 minWithstand Voltage (Remote input against output): 1500V/1 minTotal power consumption: <5VAOperation temperature: -20℃~60℃Storage temperature -40℃~85℃Operation humidity: 5~95％ RH Pollution Class: Class 2Material of Housing: Flammability acc. to UL94V0Protection Class Temp: IP30

LED Multifunction Power meter MPM8000SLED Multifunction Power meter MPM8000S

Optional Function

1 channel programmable analog output1channel Remote input1 RS-485 port Modbus-RTU protocolMulti-tariff rate


Technical Parameter:Current Input: 5A （Current value can be set up）Measurement scope: 0.5%~120% InOverload capacity: 2 X rated continuously, 100A/1s non continuously Power consumption: ≤ 0.2 VA per phase Voltage Input: 400VAC(phase voltage),693VAC(wire voltage) (Voltage value can be set up）System frequency: 45~65HzMeasurement Scope: 3%~120% UnOverload capacity: 2 X rated continuously,2500V/1s non continuously Power consumption: ≤ 0.5VA per phaseAuxiliary power: 85~265VAC/DC (30VDC is optional; 2 is “+” terminal and 1 is “-” terminal when use DC power)Display type: LED display Temp. drifting factor: <100PPM/℃Withstand voltage (Input against output): 2500V/1 minTotal power consumption: <6VAOperation temperature: -20℃~60℃Storage temperature: -40℃~85℃Operation humidity: 5~95%RHPollution class: Class 2Material of housing: Flammability acc. to UL94V0Protection class: IP 30

Digital Energy MeterDigital Energy Meter-------- DEM8900 SeriesDEM8900 Series

Note:DEM8900-1 measure current, active energy, a ctive power (optional, with analog output) DEM8900-2 measure current, reactive energy, reactive power (optional, with analog output)DEM8900-3 measure Current, active energy, r eactive energy, active/reactive power (optional, with analog output)


Features:Control range: -9.9℃～99.9℃Combined refrigeration and heating controlhystersis is adjustable, startingdelay function.Temperature upper & lower limit setup functionfactory parameter lockingfunction.0.1°resolution, 0.1°control precisionBuilt-in buzzer, with alarm, sound is loud .Standard AC220V supply power, optional DC24VElectric relay electric shock current 5A/220V *2unitsStandard 1 meter Waterproofing probe, common wire is prolongable.Technical Parameter:Temperature control range:-9.9℃～99.9℃Measured temperature error: ±0.5℃Transducer item No. : NTC (10K/3435)Control precision:0.1℃Data save: Yesworking voltage :AC220V working current:MAX200mAElectric relay touch spot current:AC5A/220VWorking temperature: -20℃~60℃Storage Temperature : -40℃~85℃1meter standard probe for free, probe dimension:φ4mm*20mmIf need to add the wire, please contact us directly.

3 Phase LED Temperature Controller3 Phase LED Temperature Controller------DPM8500 T51DPM8500 T51


Technical ParameterHousing : Flame retarded ABS;Faceplate: PC material, heat-resistant、frost resisting; Input voltage: According to meter’s standard.（220V, 380V）;Output: Heating contact capability: 20A/250Vac;Temperature measured scope: -50～150℃;Humidity measured scope:20～100%;Resolution :1℃(1%)

Function:Transducer temperature error adjustment Main control output interval temperature（Temperature difference: In fact it i s upper and lower limit control）Working Pattern （Pros and cons action: Heating or Cooling）This controller’s electric relay total has output pattern to select: 1-1 is heating and humidification mode;1-0 is heating and dehumidification mode;0-0 is cooling and dehumidification mode; 0-1 is cooling and humidification mode. Heating or Cooling exchanging function, built-in original SIEMENS high po wer 20A electric relayIt can control 3kw load directly. It also can control the hatching of heating and humidification;The control for Cooling compressor ; The control for setting hystersis, such as: connecting when temperature lower than 35℃, breaking when temperature over than 45℃. Transducer can be prolonged to 100meters.

Humidity and Temperature ControllerHumidity and Temperature Controller------DPM8500 T52DPM8500 T52


Add: 9 Floor, Qihang Building, Longteng Road,

Minzhi, Baoan District, Shenzhen, China

Tel: 86-755-33581651

Fax: 86-755-33581652

Email: [email protected]

multifunction power meter product catalogue

Business

phaseauxiliary power

dc power

overload capacity

adjustedstorage capacity

input current

continuouspower consumption

current value

continuouslypower consumption