mundos virtuales 2012

Technical

Training & Education Equipment

ContentsContents

* Electronic Pag 1

* Systems Pag 18

* Electric Pag 19

* Telecomunications Pag 23

* Mechatronics Pag 33

* Bioengineering Pag 35

* Mechanical Pag 36

TechnicalTraining & Education Equipment

Secondary

Undergraduate

Graduate

*i3net Electronic

KL - 100 NIVEL S - PKL - 100 NIVEL S - P

Linear Circuits Lab (2) - Electronic Circuits Lab

KL - 200 NIVEL S - P

Ideal for electronic circuit experiments and designing

exercises

Integrated experimental circuit and trainer with comprehensive

experiment curriculum

Supply complete training device easy and effective for

With universal breadboard for circuit designing and

prototypes

All modules equipped with an 8-bit DIP switch for fault

simulations

Individual keeping case for all modules easy carrying and

storage facilities

●

●

●

●

●

Features

The KL-200 Linear Circuits Lab(2)

- Electronic Circuits Lab is a

comprehensive and self-contained

system suitable for anyone engaged

in electronic circuit experiments.

All the necessary equipment for

electronic circuit experiments such

as power supply, function generator,

analog and digital meters are

installed on the main unit.

The 17 modules cover a wide

range of essential topics for

electronics circuit. It is a time and

cost saver for both students and

engineers interested in developing

and testing prototype circuits.


experiments

KL - 210 NIVEL S - PBasic Electricity Circuit Lab

To

Ideal for students to learn the design of electrical, electronics

and digital logic circuits.

learn efficiently, power supply, function generator and

measurement unit are all included.

All supply units are secured with overload protection.

With one main unit, user can choose the needed modules for

different learning topics.

●

Features

●

●

●


KL - 310 NIVEL PAdvanced Digital Logic Lab

The KL-310Advanced Digital Logic Lab

is designed for students and engineers

interested in developing and testing

combinational logic, sequential logic,

memory, ADC/DAC..etc. experiment

circuits and offers several application

circuits (PWM, timer, motor control..etc.).


digital logic experiments such as power

supply, clock generator, switches, displays

are built-in on the main unit. The lab has

10 experiment modules and one CPLD

& breadboard experiment module.

prototype circuits. The lab includes

● The whole trainer is fully designed by FPGA/CPLD logic circuit.Buffer circuits have enhanced protection for each module whichis powered by main unit through power socket, avoiding wrong

power source during the experiment.Covers different levels of logic circuit experiments, rangingfrom combinational logic, sequential logic as well as the logiccircuit interfacing with microcontroller and practical applicationcircuit for daily use.Students can implement their own circuit from universal CPLD& breadboard experiment module, making it possible toprototype most analog and digital circuits in the system.

Includes various types of ADC & DAC circuits to learn differentinterfacing circuits between analog and digital signal.Built-in 8-channel multiplexer in main unit to measure multipledigital signals in real time.Multiple operation modes from 4-digit 7-segment display (a)scanning display mode, (b) individual digit display mode, (c)frequency counter mode for measurement of internal andexternal clock.

input

Individual keep case for all modules for easy storing and carrying

●

●

●

●

Features

●

KL - 310 NIVEL P

KL - 300 NIVEL S - PDigital Logic Lab

Suitable for combination logic, sequential logic and

microprocessor circuits design and experiments

Ideal tool for learning the basics of digital logic circuits

Comprehensive power, signal supply and testing devices

for convenient experiments

Experiments are expandible and flexible with universal

breadboard

Capable of processing TTL, CMOS, NMOS, PMOS and

ECL circuits

All supply units are equipped with overload protection for

safety purpose

All modules equipped with 8-bit DIP switch for fault

simulations

Individual keeping cases for all modules for easy storing

and carrying

All signal generators have independent and simultaneous TTL

and CMOS level output terminal.

●

●

●

●

●

●

Features

●

●

●


*i3net Electronic

KL - 500 NIVEL P-PT

Industrial Electronic Trainer

KL - 500 NIVEL P-PT

To train technicians to be able to install and maintain

electronic equipment becomes important nowadays.

A good technician should follow state-of-the-art

technology and rapid products .

Our system is intended for the technical education.

In fact, KL-500 is adapted to theoratical and pratical

courses for studying power electronics and industrial

electronics.

innovation

Comprehensive study including the theoretical study

and practical exercises

Use of industrial-type components, devices and circuits

●

●

Features

KL - 600 NIVEL PKL - 600 NIVEL PMicrocomputer Sensing Control SystemThe KL-600 Microcomputer Sensing Control

System is a comprehensive sensor/transducer

control training system that incorporates

industrial-grade components with various control

circuits and load units. Its modular and closed-

loop control circuits allow implementation of

open-ended, individual control loops used in

industrial applications.

The KL-600 uses only industrial-standard

sensors / transducers (0~10V, 4~20mA) and

is equipped with USB interfaces for computer

interface.

Industrial-standard sensors and transducers

With USB interface ports●

Features● Open-ended design, ideal for expansion

● Offer a sensing data acquisition software

KL - 620 NIVEL PKL - 620 NIVEL PMicrocomputer Sensing Control Equipment

The KL-620 Microcomputer Sensing Control

equipment is a comprehensive sensor / transducer

control training system. Its modular and closed-loop

control circuits allow implementation of open-ended,

individual control loops used in industrial applications.

The KL-620 uses only industrial-standard

sensors/transducers(0~10V, 4~20mA) and is

equipped with USB for computer interface.

Industrial-standard sensors and transducers

With USB interface

●

●

FeaturesOpen-ended design, ideal for expansion

Offer a sensing data acquisition software●

●

*i3net Electronic

ACS - 1000 NIVEL PAnalog Control System

ACS - 1000 NIVEL P

ACS-1000, covered with many technicaldisciplines, explicates the central significance ofAnalog Control System. This applies particularlyin mechanical and electrical engineering, inproduction and process technology. It isindispensable to plant and system technology.

In the automation field, important optimizationtasks would be quite impossible to be accomplishedwithout closed-loop control technology. In line withits increasing importance, closed-loop control hasbecome an essential subject in professional trainingand further education for many professions.

In the newly formulated training curriculum,this technology plays an important role coveringa number of subjects in syllabuses for training inindustry and the crafts.

Control engineering is an exciting discipline. It offers the

quickest and best way to learn system control to improve

production processes. Electronic analog control and

simulation have become the cornerstone of technologicaladvancement.

K&H providesACS-1000 for students to observe the testing

result of Proportional-Integral-Derivative (PID) controllers

as well as phase-lag and phase-lead controllers.

Features●

● Modularized ACS-1000 is flexible enough to cater to

the needs of all level learners to make related experiments.

● The whole control modules help students to understand

control theory and application of hands-on motor control

through our comprehensive and step-by-step teachingcurriculums.

● We also provide PC based digital storage oscilloscope

module as interface to facilitate data storage and analysis

from computer. (Option)

KL - 900 A NIVEL P

Basic Communication System

KL - 900 A NIVEL P

*i3net Electronic

KL-900A offers experiments for

fundamental technical concepts in

telecommunication.

It enables students to acquire a clear

experimental view and further, they will

be familiar with the operative aspects

of the work in the telecommunication

laboratory.

The trainer includes modules with experimental circuits.It offers the beginner complete courses of basic analogand digital communication.

quipped with power supply and signal unit. Studentsonly have to adopt the oscilloscope to complete variousexperiments independently.System modularity maximizes flexibility and variety forexperimentation, and allows possibility for expansion andcustomization.

KL-900Ais e●

Features●

●

KL - 900 B NIVEL P

Analog Communication System

KL - 900 B NIVEL P

KL - 900 C NIVEL PAM/FM Transmitter & Receiver System

KL - 900 C NIVEL P

*i3net Electronic

KL-900B Analog Communication System

discloses the secret of the walky-talky based

on the 144MHz VHF band. It breaks the circuit

of walky-talky into 4 blocks : receiver block,

transmitter block, audio amplifier block and

microphone amplifier block.

Block diagrams are printed clearly on the panel

of the module, giving students a comprehensive

view of how walky-talky works.

144MHz VHF FM Transceiver Trainer

Features144MHz VHF FM transceiver trainer

2 modules form basis for over 9 fully documented experiments

Includes experiment and instructor's manual

●

●

●

AM Transmitter & Receiver FM Transmitter & Receiver

The KL-900C AM/FM Transmitter and Receiver System is a comprehensive and self-contained system

suitable for demonstrating AM and FM transmission. The system contains four separate modules- the AM

transmitter, AM receiver modules, FM transmitter and FM receiver modules.

Features

System consists of AM transmitter and receiver and FM

transmitter and receiver

Modules have switched fault DIP switches for fault-finding

experiments

Includes full documentation

●

●

●

KL - 900 D NIVEL P -PTFiber-Optic Transmission Training SystemKL - 900 D NIVEL P -PT

Fiber-Optic communication is one of the most

popular technologies in the modern days due to its

high transfer speed and large capacity KL-900D

uses fiber optic as a transmission media for the

whole experiment.

With four different data transmission ways (self

module transmission, module-to-module transmission,

PC-to-module transmission and module-to PC

transmissions) and various different modulation /

demodulation methods Introduced

in the training system, users can obtain a very clear

view of how fiber-optic transmission works.

.

-

(CVSD, FSK, etc )

FeaturesWith four different data transmission ways (self module

transmission, module-to-module transmission, PC-to-module

transmission, and module-to-PC transmission).

The equipment that you assemble will transmit voice from one

point to another, using light traveling through an optical fiber.

The experiment KL-900D will show you how easy it is to

make productive use of fiber optic materials.

●

●

●

MTS - 51 NIVEL P8051 Microcomputer Trainer

*i3net Electronic

8051 is the original chip of MTS-51 family devices

which is originated from Intel. This chip is a stand-alone,

powerful 8-bit single-chip microcomputer and is

commonly used for real-time control applications. MTS-51

microcomputer trainer is designed for learning 8051

core architecture and instructions.

FeaturesT the ISP and IAP functions of

P89V51RD2BN control chip enable the program codes to

be downloaded to flash memory and show the results at

.

Reserving external connection pins for advanced

experiments

Plenty of experiments to do various basic I/O control

applications

The single chip of the trainer can be replaced by INTEL's

8751 / 52 series (without ISP function) and ATMEL’s

AT89C51 / 52 series (with ISP function)With various common I/O components and experiments,

MTS-51 turned learners into experienced users of basic

control application with 8051 microcontroller.

hrough series port interface,

real time

●

●

●

●

●

MTS - 80 A NIVEL PZ-80 Microcomputer Trainer MTS-80A helps students to understand the

architecture and programming of Z-80 computer.

The system contains five main parts: (1) a Z-80

CPU (2) system and user memory (3) world standard

chip sets (4) input and output devices, and (5)

External Interface.

Students edit and assemble program codes

from PC and observe instant results after they

download and execute programs from system

memory. Debug functions are also available via

PC or system keypad interface.

FeaturesPower supply and all experimental peripherals are built in a

single trainer to carry out Z-80 experiments, no additional

equipment is required.

Demo programs are permanently stored in system ROM to

offer quick system test and functional demonstration.

Programming codes are downloaded/debugged/executedvia PC or Trainer keyboard

All chip sets are protected by an acrylic cover on the top

of trainer panel.

All chip names are clearly printed in corresponding positionon acrylic panel

External Interface allows user to create user-defined circuits.

●

●

●

●

●

●

8086 Microcomputer Trainer

MTS - 86 C NIVEL P

MTS-86C helps students to understand the

architecture and programming of 8086 computer.

The system contains five main parts : (1) an 8086 CPU

(2) system and user memory (3) world standard chip

sets (4) input and output devices, and (5) External

interface.

Students edit and assemble program codes from

PC and observe instant results after they download

and execute programs from system memory. Debug

functions are also available via PC or system keypad

interface.

MTS - 51 NIVEL P

MTS - 80 A NIVEL P

MTS - 86 C NIVEL P

KR -101 NIVEL PT

*i3net Electronic

KR -101 NIVEL PTRefrigerator Model Training System KR-101 completely places all essential refrigerator components on

the front panel of the system. Only when students understand theoperation principal of the refrigerator they connect the componentscorrectly. Under such circumstance, KR-101 becomes a real refrigeratorand students can use the meters located on the front panel to record thestatus of the components during its operation.

KR-101 also clearly demonstrates four major elements such asCondenser, Compressor, Evaporator, and Capillary Tube located atthe rear side of the system. Students can touch and feel the elementsas well as draw the Mollier diagram to record the characteristic of therefrigerant during different phase of the refrigeration cycle.

For the sake of quick demonstration, KR-101 provides a TeacherBoard for teacher to insert it into the side slot. When teacher board isinserted, the whole system starts running even the wire connections onthe front panel are incorrect.

can

The major elements of the refrigeration system including condenser,

compressor, evaporator, capillary tube, filter and drier are open for

the purpose of best observation.

The system contains various electronic components and their

symbols located at the front panel allowing students to use

4mm safety plug cables to construct the control circuit of the

refrigeration system.

The control circuit of the refrigeration system are made of following

electronic devices: system fuse, fan indicator, evaporator door

switch...etc.

The system includes high pressure gauge, low pressure gauge,

AC Voltmeter, AC Ammeter and temperature meter which are

located at the front panel allowing students to record the status

of the components during its operation.

The refrigerant path for high pressure tube is painted in red and

low pressure tube in blue.

Teacher board allows teacher to quick demonstrate the operation

of the refrigeration system needless constructing the control

circuits.

●

●

●

Features

●

●

●

KR - 115 NIVEL PTKR - 115 NIVEL PTRefrigeration nd Heat Pump SystemCycle a

KR-115 is designed to learn the theory of Heat Transfer in refrigeration

engineering. With proper setup, KR-115 can be emulated as a Refrigeration

or Heat Pump system. All system components are mounted on the front

panel so students can directly observe, touch the components, and hear

the noise produced by the components while it is running under either

Refrigeration or Heat Pump cycle.

KR-115 offers three expansion devices available for the refrigerant

to pass through; they are pressure expansion valve, capillary tube, and

thermal expansion valve. Students can use the control panel to switch

the preferred expanding path from three expansion devices and compare

the corresponding performance under Refrigeration or Heat Pump cycle.

The state of the refrigerant can be clearly observed through 6 sight

glasses at different phases of the Refrigeration / Heat Pump cycle.

5 hand valves are used to manually control the flowing direction of the

refrigerant circulating through the system. Student must use the valves

to lead the refrigerant to the appropriate flowing direction so that the

system can operate in corresponding cooling / heating condition. If

students mislead the refrigerant to wrong flowing direction, the pressure

protection switches will detect the conflict and halt the compressor to

prevent the system from being damaged.

All system components, including condenser, compressor, evaporator,

capillary tube, filter, refrigerant receiver, accumulator, hand valves,

pressure gauges, expansion devices, are mounted on the front

panel for direct operation and observation

Use control panel to select heat pump cycle (cooling or heating),

fan speed of evaporator and condenser, and expanding path of

the refrigerant

Use control box to monitor the system voltage and current as

well as heat pump status.

Provide three types of expansion devices, including capillary

tube, pressure expansion valve, and thermal expansion valve

for refrigerant to pass through.

Provide 6 sight glasses to observe the refrigerant status before

and after passing evaporator, condenser, expansion devices,and compressor.

Provide 5 hand valves to control the flowing direction of the refrigerant.

Provide high and low pressure protection switches to automatically

halt the compressor when detecting wrong refrigerant flowing path.

The refrigerant path for high pressure tube is painted in red and

low pressure tube in blue.

Features●

●

●

●

●

●

●

●

Air Conditioner Training SystemKR - 201 NIVEL PTKR - 201 NIVEL PT

The main composition of KR-201 is a real window type

air conditioner just like in our daily life. What makes it

special is that students are able to observe the operation

of the internal components and the state of the refrigerant

while the air conditioner is running.

From the front panel, there are four refrigerant sight

glasses, which provide students an excellent opportunity

to observe the state of the refrigerant before and after

passing through four major elements Compressor,

Condenser, Capillary Tube, and Evaporator.

Students can also use built-in gauges/meters to draw

the Mollier diagram and so as to understand the

performance of this air conditioner. Combining the

observation of refrigerant state during different phase

of the refrigeration cycle, KR-201 helps students to

understand the operating principle of the window type

The operation of the system is based on a real window-type airconditioner behind the front panel.The metal case of the air conditioner is replaced by plastic acrylicso that students can observe its internal structure even when itis operating.Major components including condenser, evaporator and capillarytube of the air conditioner are extended to the front panel andcovered by plastic acrylic to fit experimental needs.Provide 4 sight glasses at front panel to observe the refrigerantstatus before and after passing through compressor, condenser,evaporator, and capillary tube.

Provide voltmeter and ammeter at front panel to monitorinstant system power.Provide high and low pressure gauge at front panel to monitorinstant inlet/outlet pressure of the compressor.Provide a 6-channel temperature meter located at front panelto instantly display different refrigerant temperature beforeand after passing through compressor, condenser, evaporator,and capillary tube.Provide a temperature meter located at the front panel to displaythe temperature from a moveable sensor.AMollier Chart is clearly printed on the front panel for quick reference.

Features●

●

●

●

●

●

●

●

KR - 212 NIVEL PTKR - 212 NIVEL PT

Air Conditioner Training SystemSingle-Split Type Cooling / Heating

Due to its lower level of indoor noise and high flexibility of installation, SplitType Air Conditioner becomes more and more popular in nowadays. KR-212itself is a real split type air conditioner especially designed for teachingpurpose. Both indoor and outdoor units are installed on the demonstrationstand so students can learn the operating principle of both units at the sametime. User can easily observe and record the behavior of both units whilerunning under different setup by remote controller such as temperature, fanspeed, or operating mode (cooler, heater, dehumidifier...)

Four valves are intentionally designed to be located at the front panel ofthe demonstration stand to allow students handily install the connectionpipes (gas pipe and liquid pipe) between indoor and outdoor units. Thishelps students further to realize how Indoor and Outdoor Units cooperatewith each other as well as to understand the refrigerant path during itscirculation cycle.

Students can use the built-in gauges/meters and additional measurementtools to record the experimental data and further to draw the PsychrometricChat and Mollier Diagram so as to understand the performance of this air

The operation of the system is based on a real split-type airconditioner including one indoor unit and one outdoor unitinstalled on a same stand.The system can be operated as either cooler or heater modes.Provide 4 fixing valves at the front panel to enable studentshandily install the connection pipes (gas pipe and liquid pipe)between indoor and outdoor units.Provide voltmeter and ammeter at the front panel to monitorinstant system power.

Provide high and low pressure gauge at the front panel tomonitor instant inlet/outlet pressure of the compressor.Both indoor and outdoor units are powered by an isolatedpower supply with overload protection.The circuit diagram of the system and a Mollier Chart areclearly printed on the front panel for quick reference.Both indoor unit and outdoor unit are installed on an aluminumstand with wheels for easy movement.

Features●

●

●

●

●

●

●

*i3net Electronic

*i3net Electronic

GFC -1300 NIVEL PTDMFC LabGFC -1300 NIVEL PT

Nowadays the fuel cell technology is making a great

progress in developments and related applications so

that various fuel cell based apparatuses and applications

are launched out on the market increasingly. The fuel cell

has following advantages : high efficiency, eco friendly, low

noise and vibration, and portability.

GFC-1300 is an apparatus that directly produces

electricity via chemical reaction in methanol solution.

The operating parameters of GFC-1300 are adjustable

to allow trainees to learn the operating concept of DMFC

via hands on practices.

GFC-1300 is the best experimental platform for training and studying.Various fundamental applications for fuel cell are provided.Real-time displaying and logging for the fuel cell voltage, liquid level and temperatures of fuel cell and power-generating module.Windows-based software is adopted.

●

●

Features

●

●

CIC - 800 A NIVEL P - PTCIC - 800 A NIVEL P - PTInterface Lab

An interface is a hardware and software data transmissionregulator that controls data exchange between the PC andother peripheral devices, including RS-232C, AT-BUS, IDE,SCSI, ISA, PCI,AGP, IrDA, GPIB, USB, IEEE-1394, Wireless etc...

Each interface device inherits different specifications suchas transmission rate, data format, protocol and applications.Accordingly, learners can familiarize themselves with each kindof interface devices.

CIC-800A contains multi-purpose interfaces modules, inclusiveof serial port (RS-232C), parallel port (Centronics) and universalserial bus (USB2.0) that can be used for various peripheral devices.Add-on modules are available for experiment purpose. The RS-232C and centronics interface firmware adopt Atmel's chipsetmodules, and use Microsoft visual C++ 6.0 as developing tools.

The USB 2.0 interface firmware adopts cypress's chipset modules,and uses Microsoft visual C++ 6.0 as developing tools. By learningtraditional and popular interfaces, users can reap the benefits.Additionally, we also provide source codes and execution files

for further studying.

CI - 33001 C NIVEL P - PTCPLD/FPGA Prototyping Board

CI - 33001 C NIVEL P - PT

Adopt Atmel ATF1508-15 CPLD chip is compatible with

Altera MAX 7128, containing 128 microcells over 2500

usable gates, which is able to reprogram over 10k times.

Using Altera MAX+PLUS II for chip development, users

can use graphic or text editor (HDL syntax) to design,

simulate and implement digital circuit easily.

The program is downloaded from PC to CPLD chip via

series port with JTAG technology.

Providing some simple I/Os for design efficiency

Reserving large hardware design area best for circuit

prototyping and student project implementation

Best solution for the shortage of budget

®

Features●

●

●

●

●

●

*i3net Electronic

CPLD/FPGA Experiment BoardCIC- 33004 NIVEL P - PT

Atmel ATF1504-15 CPLD chip is compatible with AlteraMAX 7064, containing 64 microcells over 1000 usablegates, which is able to reprogram about 10k times.

Providing some simple I/Os for design efficiencySuitable for new FPGA designers

Using Altera MAX+PLUS II for chip development, userscan use graphic or text editor (HDL syntax) to design,simulate and implement digital circuit easily.The program is downloaded from PC to CPLD chip viaseries port with JTAG technology.

Best solution for the shortage of budget

®

Features●

●

●

●

●

●

CIC - 310 NIVEL P - PTCPLD/FPGA Digital Circuits Development System

CIC - 310 NIVEL P - PT

CIC-310 CPLD/FPGA Development System is

self-contained system, which contains stabilized DC

power supplies, Development Board , and Experiment

Board. CIC-310 also provides digital system designers

for hardware verification which enables students to learn

digital system design efficiently.

FPGA (FLEX 8000) download board (84pin)I/O experiments board

MAX+PLUS II development software (student version)Program manager software for program download andIn-System-ProgrammingExperiment manual

®

Features●

●

●

●

●

CIC - 500 NIVEL P - PTDSP Development And Experiment System

CIC - 500 NIVEL P - PT

for learning DSP hardware implementations. The

system combines both DSP chip for signal processing

and FPGA chip for I/O control.

With various built-in I/Os and several implementation

examples, ranging from basic DSP theory to advanced

DSP applications, users are able to learn DSP

implementations efficiently.

FeaturesFPGA (FLEX 8000) download board (84pin)

Program manager software for program download and

In-System-Programming

Additional training content : DC motor, stepper motor,

temperature and PLC I/O controls

I/O expanded socket included

●

●

●

CIC- 33004 NIVEL P - PT

CIC-500 is a DSP development system designed

*i3net Electronic

CIC - 560 NIVEL PTAdvanced FPGA Development SystemCIC - 560 NIVEL PT

CIC-560 training system is designed based on

the latest digital technology in conjunction with EDA

experimental teaching material. This training system

consists of FPGA chip with higher logic elements and

large number of pins. Therefore, students are able to

develop, implement and verify design of basic or

advanced digital circuit, digital signal processor and

CPU/MCU.

This system is equipped with ADC/DAC analog

module, keyboard, LCD display, PS2, VGA, UART,

SCI interface, LEDs, 8-digit 7-segment displays, DC

motor and stepper motor which allow students to

handle complex mixed signal design and digitalcontrol design.

CIC-560 is well equipped for complex digital circuit design.

It provides AD/DA converter, keypad, LCD display, PS/2, VGA,

UART, SCI interface, LEDS, 8-digit 7-segment LED display,

step motor and DC motor driver circuits.

Suitable for the curriculum training in electronics, electrical

engineering, information, communication and automation

field.

Ideal forprofessional ICdesigners, R&Dengineers,undergraduate

and graduate students to learn IC design and software development.

Develop and verify basic and advanced digital circuit, digital

signal processing and CPU/MCU with large-element and

multi-pin FPGA chip.

Features●

●

●

●

●

CIC - 900 NIVEL PT

ARM9 Start Kit

CIC - 900 NIVEL PT

Today SoCs are widely applied in the computer, communications,

consumer electronics field- mobile phones, PDAs, laptops, DTVs,and other devices. This is the beginning of the SoC era.

CIC-900 ARM9 Start Kit equipped with Samsung's S3C2500

16/32-bit RISC microcontroller on the basis of an ARM9 CPU core

which is a cost effective and superb performance microcontroller

solution for ethernet-based systems, for example SOHO router,

internet gateway, WLAN AP, etc..

The CIC-900 ARM9 Start Kit is intended for the beginner who

will study the architecture and operation of the System-on-Chip

devices.All applicationsare related to new and exciting technology.

It also serve as a lab course for undergraduate and master

students of computer science, computer engineering and electrical

engineering.

Guided learning software platform

Complete teaching tools and manuals

Source codes provided

Protective case

Complete boot loader teaching solution

Features●

●

●

●

●

*i3net Electronic

PSoC Training LabCIC - 910 A NIVEL PTCIC - 910 A NIVEL PT

Simple, Easy, Fast, and Fun

PSoC (Programmable System on a Chip) is one of the mostinnovative technologiesnowadays. Insteadof adoptinga traditionalMCU with fixed peripherals, or designing a circuitwith discreteanalog and digital components, the designer can select a singleoff-the-shelf PSoC on a complete project for mixed-signalapplications. Additionally, the unique features of generatingthe exact peripheral components, programmable interconnectand reuse of on-chip resources not only lowers the cost of materials,but also reduces the design cycle and the inventory risk.

By popular demand of the PSoC training facility in theeducational market, CIC-910A is designed to meet enormousneeds. The introduced CIC-910A training course focuses ondigital/analog system integration specification in order to bridgethe gap between these design worlds and to provide a step ineducating system architects for realizing mixed-signal SoCs.The training lab helps users to understand PSoC operatingtheory and PSoC application design flow. With various I/Operipherals and versatile experiments, users are able to learnPSoC programming and hardware implementation in a veryefficient way.

ITS 101 NIVEL P - PTInternet TCP/IP Protocol Training SystemITS 101 NIVEL P - PT

The internet has permeated among our daily life in every aspect,

and it provides the fundamental connection with many state-of-the-

art technology such as third-generation cell phones, video communication

and information appliances.

The core technology of the internet is TCP/IP protocol suite.

Understanding TCP/IP protocol suite is crucial to users of the internet

at all levels, and it facilitates better application of the internet. Internet

TCP/IP Protocol Training System is designed to meet this need.

There are seven layers of TCP/IP protocol, and from the second

to the forth of which plays the key role in operating system kernels

such as Linux and Windows which are difficult for users to understand.

Internet TCP/IP Protocol Training System not only reveals the inner

workings of TCP/IP protocol software, but also provides methods to

modify the behavior of TCP/IP protocol software for experiment

purpose.

System Features

1. Real-time packet monitor- Observe TCP segments, IP datagrams, ICMP

datagrams, UDP datagrams and ethernet frames

2. Packet generator- Generate actual TCP segments, IP datagrams, ICMP

datagrams, UDP datagrams and ethernet frames- Manual or programmable packet generation

(packet size up to 1500 bytes)

3. Congestion generator- User programmable packet generation speed up

to 1.2 Mbps

- User programmable packet delay, error and lost

4. Programmable router

- Configurable as a router or host

- Can emulate as a firewall or NAT

- Provide a platform to install user-defined

network message procedures for experiment

*i3net Electronic

CIC - 700 NIVEL PTLonWorks Control Network SystemCIC - 700 NIVEL PT Echelon networking technology enables end-users

to remotely connect, monitor, control, sense, and diagnose

intelligent devices. LonWorks networks simplify system

management, conserve energy, improve operations

and reduce costs.

LonWorks solutions provide a unique opportunity for

manufacturers of everyday devices to offer new, revenue-

generating services, gain useful data about their products

and customers, improve brandvalue, and increase customer

retention. For example, manufacturers of dishwashers,

washing machines, and other appliances can collect usage

data from LonWorksdevices that can beused to increase

sales as well as improve future product features.They can

use the network connection to add new functionality to their

products over time with fee upgrades, pay-per-use,or asa

free incentive to build customer loyalty. With remote

diagnostic capabilitiesproviders can anticipateappliance

failures and trigger service calls, reducing down time

for consumers.

Features

Implement the real LonWorks control network system on

a single table

Provide complete system tools for users to develop and

integrate Lonworks control network

Explain profound control network theories in an easy-to-

understand way fitting for one semester

Provide more than 7 real everyday devices, such as fire

alarm, temperature sensor and fan for control of network

exercises

Detailed step-by-step experiment manual

●

●

●

●

●

EM - 3000 NIVEL P

Electrical Machines System

EM - 3000 NIVEL P

to distinguish the mechaniclal similarities and

differences among all electrical machinaries.

Students study and turn all kind of electrical

machinaries into circuit models for the foundation.

Moreover, it enhances students ability for further

employing and controlling. Besides facilitating

teaching,it makes students be familar with every

kind of electrical mechanical test.

Modular design provides flexible experimental requirement

Each Module panel height compatible with DIN A4 standard

Using 4 mm safety sockets and plugs

Each DC/AC power supply equipped with overload protection

Rotary machine and brake with overheating protection

Adopting digitized and microprocessor-based measuring

instrument to provide high-accuracy measurement

Brake with constant speed /constant torque function, easy

to operate

Drawing complete T/N curve

Connecting to PC, measuring and drawing characteristic

curve available

300W-grade designed equipment suitable for learning the

theory and characteristics of electrical machines

Stand-alone machine design equipped with two shaft ends

and aluminum alloy base for coupling to other machines

Training panel uses 5 mm isolation bakelite, printed

component symbol, value and function, easy to connect

Fully protected system safe to connect various kind of machines

Providing powerful computer measuring software for saving

graphic file, drawing and printing characteristic curves

For the sake of safety, the system normally operates at

three-phase 220V. Different line voltages can be adjusted

by system transformer.

Features

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

Power Electronics Training System

PE - 5000 NIVEL P - PTPE - 5000 NIVEL P - PTThe PE-5000 Power Electronics Training

System consists of 28 experimental modules,

a three-phase squirrel cage motor, load,

control and measuring devices. It inculde

single-phase rect i f iers, three-phase

rectifiers, DC choppers, inverters and

application experiments.

Features

The PE-5000 is the combination of power, electronics, and

control. It has wide applications of solid-state electronics to the

control and conversion of electric power. Popular circuits of

power electronics contain rectifiers, choppers and inverters.

The experimental for PE-5000 modules includes converter,

power supply, load, control and testing modules. These experimental

modules and instruments will be introduced and demonstrated

in the subsequent experiments.

PLC - 100 NIVEL P - PTProgrammable Logic Controller (FATEK PLC) TrainerPLC - 100 NIVEL P - PT

Since PLC (Programmable Logic Controller)

was first introduced in 1970, it has been in common

usage in various industriessuch asmachineand process

controls. Designed with the latest microprocessor and

electronic circuitry, today’s compact PLCs features

high reliability, high performance, high speed and

networking. The use of PLCs in automated production

lines enhances system reliability, product quality,

information sharing, efficiency and flexibility and thus

reduces costs.

PLC-100

It provides students with a

thorough understanding of the theories and applications

of programmable logic controllers. The trainer

enables students to learn step by step from the

fundamentals of PLC to more advanced controls

used in industry.

is a self-contained trainer which consists

of a FATEK PLC main unit and commonly used I/O

devices for simulation.

FeaturesInput-simulation switches function as level and pulse input

for different input signal

Installation of output relay helps to increase load current

Easy-to-use, windows-based development software

With various peripheral devices and other devices that support

externalextensions,particularly suited for laboratoryexperiment

and project implementation

Equipped with various simulations I/Odevices for the convenience

of studying and observing the results

Use 4mm safety sockets input/output terminals to ensure the

physical safety of users

Easy to carry, move and store with a suitcase design

Source mode(standard) or sink mode(option) upon request

●

●

●

●

●

●

●

●

*i3net Electronic

PLC - 200 NIVEL P - PTProgrammable Logic Controller (SIEMENS PLC) TrainerPLC - 200 NIVEL P - PT

Since PLC (Programmable Logic Controller) wasfirst introduced in 1970 , it has been widely applied tovarious industrial uses such as machine and processcontrols. Designed with the latest microprocessorandelectronic circuitry, today's compact-size PLCs providethe features of high reliability, high performance, highspeed and networking. The use of PLCs in automatedproduction lines enhances system reliability, productquality, information sharing, efficiency and flexibility

and thus reduces costs.

PLC-200 is a self-contained trainer which consists

of a SIEMENS PLC main unit and commonly used I/O

devices for simulation. It offers students excellent

theories and wide applications of programmable logic

controllers. The trainer enables students to learn step

by step from the fundamentals of PLC to more advanced

controls used in industry.

FeaturesInput-simulation switches function as level and pulse Input for

different input signal

nstallation of output relay helps to increase load current

Easy-to-use, windows-based development software

ith various peripheral devices and other devices that support

external extensions, particularly suiting laboratory experiment

and project implementation

Equipped with various simulations I/O devices for studying and

observing the results

Use 4mm safety sockets Input/Output terminals to ensure users

physical safety


I

W

●

●

●

●

●

●

●

PLC - 300 NIVEL P - PT

Programmable Logic Controller (MITSUBISHI PLC) Trainer

PLC - 300 NIVEL P - PT

Since PLC (Programmable Logic Controller) was first

introduced in 1970 , it has been widely applied to various

industrial uses such as machine and process controls.

Designed with the latest microprocessor and electronic

circuitry, today's compact-size PLCs provide the features of

high reliability, high performance, high speed and networking.

The use of PLCs in automated production lines improves

system reliability, product quality, information sharing,

efficiency and flexibility and thus reduces costs.

PLC-300 is a self-contained trainer which consists of

a MITSUBISHI PLC main unit, I/O devices for simulation

and I/O devices that are commonly used. It provides

students with a thorough understanding of the theories

and applications of programmable logic controllers.

The trainer enables students to learn step by step the

fundamentals of PLC and more advanced controls used

in industry.

FeaturesInput-simulation switches with level and pulse Input functions

for the requirements of different input signal

Output Relay's installation helps to increase load current

Easy-to-use windows-based development software

Equipped with various peripheral devices and other devices

that can support external extensions, particularly suits for

laboratory experiment and project implementation.

,

●

●

●

With various simulations I/O devices for the convenience

of studying and observing the results.

Use 4mm safety sockets Input/Output terminals to ensure

the physical safety of users.


●

●

●

●

*i3net Electronic

AC Induction Motor Winding Trainer

EM - 3360 - 3A NIVEL P - PTEM - 3360 - 3A NIVEL P - PT

EM-3360-3A 1Ø-2PEM-3360-3A 1Ø-4P

Use 4mm safety socket terminal

The clearly- printed winding set codes and colorful wire

on top allow user to do winding and operation easily

The power input with the motor circuit breaker

Easy linking to brake controller unit for measure and draw

the characteristics of each winding motor through PC

Plug-in panel helps teachers complete the experiments

easily and quickl y (Optional)

Features●

●

●

●

●

EM-3360-3A AC Induction Motor Winding Trainer is a motor that can be connected for various poles as theself-starting three-phase induction motor and single-phase induction motor which is used with the resistor or capacitor starting.

Students can learn the different types of motor winding t . theMagnetic Powder Brake Unit (EM-3320-1A) and Brake Controller (EM-3320-1N), i

hrough the simple winding connection Usingt can offer external load torque to

see the characteristics of different types of motor.

optional

EM - 3350 NIVEL P - PTCutaway Model of Electrical MachineEM - 3350 NIVEL P - PT

*i3net Electronic

Cutaway models are made from normal electrical machines. The stator is cut away by 1/4 over the entire length for an optimum view of the internal construction of the machine and it is still operating. The cutaway surfaces are protected against corrosion.

*i3net Electronic

DT - 01 NIVEL P DT - 01 NIVEL P Digital Trainer

With breadboard, digital circuits, flip-flops and monostable multivibrators, counters, encoders, decoders, multiplexers, demultiplexers and sequencers, resistor, LED and 7 segments LED displays, memory devices, etc..

AC adaptor jack : I/P DC + 8 V, 1.5 A

Pulse switch : two bounce-free push-buttons

Logic switch : Eight logic level switches in DIP type

DC O/P : DC + 5 V, 750 mA for user

B-023 breadboard : Solderless breadboard with 1580

interconnected tie points

Clip terminal : Logic probe clip terminal

LED display : Eight LED buffered logic level indicators.

Spections●

●

●

●

●

●

●

BNC jacks.●

Banana jacks.●

Clokc adjustment : Fine adjustment of clock frequency●

Select switch : Clock range selection●

L : 10-40Hz. H : 1K-20KHz

ETS - 8000A NIVEL P

General Digitized Training System

ETS - 8000A NIVEL P

The ETS-8000Ais a basic digital logic circuit training system. It includes combinational logic and sequential logic experiment circuit. The course content of experiment has hardware emulation and software simulation.

All necessary equipment for digital logic experiment suchas power supply, signal generator,indicator, measurement are installed on the main unit.

FeaturesSuitable for combinational logic, sequential logic experiments and designs

deal tool for learning the basics of digital logic circuits

Comprehensive power, signal supply and measurement devices for making experiments easily

All supply units are equipped with overload protection for safety

I

Expandable and flexible experiments with universal breadboard

Computer interaction includes software simulation & hardware emulation

●

●

●

●

●

●

*i3net Systems

CIC - 900 NIVEL PT

ARM9 Start Kit

CIC - 900 NIVEL PTToday SoCs are widely applied in the computer, communications,

consumer electronics field- mobile phones, PDAs, laptops, DTVs,and other devices. This is the beginning of the SoC era.

CIC-900 ARM9 Start Kit equipped with Samsung's S3C2500

16/32-bit RISC microcontroller on the basis of an ARM9 CPU core

which is a cost effective and superb performance microcontroller

solution for ethernet-based systems, for example SOHO router,

internet gateway, WLAN AP, etc..

The CIC-900 ARM9 Start Kit is intended for the beginner who

will study the architecture and operation of the System-on-Chip

devices.All applicationsare related to new and exciting technology.

It also serve as a lab course for undergraduate and master

students of computer science, computer engineering and electrical

engineering.

Guided learning software platform

Complete teaching tools and manuals

Source codes provided

Protective case

Complete boot loader teaching solution

Features●

●

●

●

●

ITS 101 NIVEL P - PTInternet TCP/IP Protocol Training SystemITS 101 NIVEL P - PT

The internet has permeated among our daily life in every aspect,

and it provides the fundamental connection with many state-of-the-

art technology such as third-generation cell phones, video communication

and information appliances.

The core technology of the internet is TCP/IP protocol suite.

Understanding TCP/IP protocol suite is crucial to users of the internet

at all levels, and it facilitates better application of the internet. Internet

TCP/IP Protocol Training System is designed to meet this need.

There are seven layers of TCP/IP protocol, and from the second

to the forth of which plays the key role in operating system kernels

such as Linux and Windows which are difficult for users to understand.

Internet TCP/IP Protocol Training System not only reveals the inner

workings of TCP/IP protocol software, but also provides methods to

modify the behavior of TCP/IP protocol software for experiment

purpose.

System Features

1. Real-time packet monitor- Observe TCP segments, IP datagrams, ICMP

datagrams, UDP datagrams and ethernet frames

2. Packet generator- Generate actual TCP segments, IP datagrams, ICMP

datagrams, UDP datagrams and ethernet frames- Manual or programmable packet generation

(packet size up to 1500 bytes)

3. Congestion generator- User programmable packet generation speed up

to 1.2 Mbps

- User programmable packet delay, error and lost

4. Programmable router

- Configurable as a router or host

- Can emulate as a firewall or NAT

- Provide a platform to install user-defined

network message procedures for experiment

*i3net Systems

CIC - 700 NIVEL PTLonWorks Control Network SystemCIC - 700 NIVEL PT Echelon networking technology enables end-users

to remotely connect, monitor, control, sense, and diagnose

intelligent devices. LonWorks networks simplify system

management, conserve energy, improve operations

and reduce costs.

LonWorks solutions provide a unique opportunity for

manufacturers of everyday devices to offer new, revenue-

generating services, gain useful data about their products

and customers, improve brandvalue, and increase customer

retention. For example, manufacturers of dishwashers,

washing machines, and other appliances can collect usage

data from LonWorksdevices that can beused to increase

sales as well as improve future product features.They can

use the network connection to add new functionality to their

products over time with fee upgrades, pay-per-use,or asa

free incentive to build customer loyalty. With remote

diagnostic capabilitiesproviders can anticipateappliance

failures and trigger service calls, reducing down time

for consumers.

Features

Implement the real LonWorks control network system on

a single table

Provide complete system tools for users to develop and

integrate Lonworks control network

Explain profound control network theories in an easy-to-

understand way fitting for one semester

Provide more than 7 real everyday devices, such as fire

alarm, temperature sensor and fan for control of network

exercises

Detailed step-by-step experiment manual

●

●

●

●

●

KL - 100 NIVEL S - PKL - 100 NIVEL S - P

*i3net Electric




exercises





prototypes


simulations


storage facilities

●

●

●

●

●

Features


















experiments

*i3net Electric


To








●

Features

●

●

●


KL - 500 NIVEL P-PT

Industrial Electronic TrainerKL - 500 NIVEL P-PT

To train technicians to be able to install and maintain

electronic equipment becomes important nowadays.

A good technician should follow state-of-the-art

technology and rapid products .

Our system is intended for the technical education.

In fact, KL-500 is adapted to theoratical and pratical

courses for studying power electronics and industrial

electronics.

innovation

Comprehensive study including the theoretical study

and practical exercises

Use of industrial-type components, devices and circuits

●

●

Features

*i3net Electric

EM - 3000 NIVEL P

Electrical Machines System

EM - 3000 NIVEL P

to distinguish the mechaniclal similarities and

differences among all electrical machinaries.

Students study and turn all kind of electrical

machinaries into circuit models for the foundation.

Moreover, it enhances students ability for further

employing and controlling. Besides facilitating

teaching,it makes students be familar with every

kind of electrical mechanical test.

Modular design provides flexible experimental requirement

Each Module panel height compatible with DIN A4 standard

Using 4 mm safety sockets and plugs

Each DC/AC power supply equipped with overload protection

Rotary machine and brake with overheating protection

Adopting digitized and microprocessor-based measuring

instrument to provide high-accuracy measurement

Brake with constant speed /constant torque function, easy

to operate

Drawing complete T/N curve

Connecting to PC, measuring and drawing characteristic

curve available

300W-grade designed equipment suitable for learning the

theory and characteristics of electrical machines

Stand-alone machine design equipped with two shaft ends

and aluminum alloy base for coupling to other machines

Training panel uses 5 mm isolation bakelite, printed

component symbol, value and function, easy to connect

Fully protected system safe to connect various kind of machines

Providing powerful computer measuring software for saving

graphic file, drawing and printing characteristic curves

For the sake of safety, the system normally operates at

three-phase 220V. Different line voltages can be adjusted

by system transformer.

Features

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

The electrical machines system leads students

ACS - 1000 NIVEL PAnalog Control SystemACS - 1000 NIVEL P

ACS-1000, covered with many technicaldisciplines, explicates the central significance ofAnalog Control System. This applies particularlyin mechanical and electrical engineering, inproduction and process technology. It isindispensable to plant and system technology.

In the automation field, important optimizationtasks would be quite impossible to be accomplishedwithout closed-loop control technology. In line withits increasing importance, closed-loop control hasbecome an essential subject in professional trainingand further education for many professions.

In the newly formulated training curriculum,this technology plays an important role coveringa number of subjects in syllabuses for training inindustry and the crafts.

Control engineering is an exciting discipline. It offers the

quickest and best way to learn system control to improve

production processes. Electronic analog control and

simulation have become the cornerstone of technologicaladvancement.

K&H providesACS-1000 for students to observe the testing

result of Proportional-Integral-Derivative (PID) controllers

as well as phase-lag and phase-lead controllers.

Features●

● Modularized ACS-1000 is flexible enough to cater to

the needs of all level learners to make related experiments.

● The whole control modules help students to understand

control theory and application of hands-on motor control

through our comprehensive and step-by-step teachingcurriculums.

● We also provide PC based digital storage oscilloscope

module as interface to facilitate data storage and analysis

from computer. (Option)

*i3net Electric

Power Electronics Training System

PE - 5000 NIVEL P - PTPE - 5000 NIVEL P - PTThe PE-5000 Power Electronics Training

System consists of 28 experimental modules,

a three-phase squirrel cage motor, load,

control and measuring devices. It inculde

single-phase rect i f iers, three-phase

rectifiers, DC choppers, inverters and

application experiments.

Features

The PE-5000 is the combination of power, electronics, and

control. It has wide applications of solid-state electronics to the

control and conversion of electric power. Popular circuits of

power electronics contain rectifiers, choppers and inverters.

The experimental for PE-5000 modules includes converter,

power supply, load, control and testing modules. These experimental

modules and instruments will be introduced and demonstrated

in the subsequent experiments.

AC Induction Motor Winding Trainer

EM - 3360 - 3A NIVEL P - PTEM - 3360 - 3A NIVEL P - PT

EM-3360-3A

EM-3360-3A 1Ø-2PEM-3360-3A 1Ø-4P

Use 4mm safety socket terminal

The clearly- printed winding set codes and colorful wire

on top allow user to do winding and operation easily

The power input with the motor circuit breaker

Easy linking to brake controller unit for measure and draw

the characteristics of each winding motor through PC

Plug-in panel helps teachers complete the experiments

easily and quickl y (Optional)

Features●

●

●

●

●

EM-3360-3A AC Induction Motor Winding Trainer is a motor that can be connected for various poles as theself-starting three-phase induction motor and single-phase induction motor which is used with the resistor or capacitor starting.

Students can learn the different types of motor winding t . theMagnetic Powder Brake Unit (EM-3320-1A) and Brake Controller (EM-3320-1N), i

hrough the simple winding connection Usingt can offer external load torque to

see the characteristics of different types of motor.

optional

*i3net Electric

EM - 3350 NIVEL P - PTEM - 3350 NIVEL P - PT

Cutaway Model of Electrical Machine

Cutaway models are made from normal electricalmachines. The stator is cut away by 1/4 over the entire length for an optimum view of the internal construction of the machine and it is still operating. The cutaway surfaces are protected against corrosion.

DGS - 100 NIVEL PT

GSM /GPS Experimental Set

DGS - 100 NIVEL PT

Data Communication and Networking G S M / G P S E x p e r i m e n t a l S e t Data Communication and Networking DGS-100 covers two topics in modern communication GPS technology and GSM / G P R S t e c h n o l o g y .

In GPS module, the GPS receiver decodes the NMEAdata strings from the satellites and output to software interface for the discussion of current position, speed, direction, time, etc In GSM/GPRS module, the usage of AT commands is introduced. Students can use software interface to send AT command to control GSM/GPRS module, send SMS message and make a phone call through headset interface, or access to the Internet

When integrating both GPS and GSM/ GPRS modules, the latitude and longitude data received by GPS module, this reference data will be sent to internet by GPRS service and report in Google Map Website.

It’s a powerful platform for experimenting wireless communication when training and education, integratingGSM/GPRS with GPS modules, FAX Class1, TCP/IP, NMEA0183 and ETSI GSM 07.07 protocols to be one set.

●

Features

*i3net Telecomunications

BT - 3000 NIVEL PTBT - 3000 NIVEL PT

Wireless Embedded Training System, BT-3000 was developed to educate wireless control and embedded technology.

Its distinguished technology compared to wired embedded system is wireless control USING Bluetooth protocol.

Wireless embedded technology will be used in application of Home networking, Ubiqitous sensor networking, Telemetric and Industrial controlinnear future.

Through experiment using BT-3000 students learn hardware design and wireless communication protocol easily. Hardware design includes Controller and modules and software design includes bluetooth communication protocol.

Wireless Embedded Training System


BT - 3000 NIVEL PTBT - 3000 NIVEL PT Protocol Analysis and Simulation / Emulation * Protocol Training - Protocol Command - Protocol Leveling - Protocol Signaling * Profile Training - Profile Leveling - Profile Signaling - Profile CommandDemo Function - Audio Conversation - File Transfer - ChattingData Communication Experiment UsingVarious Interface (USB, UART)Hardware Experiment is AvailableMulti Purpose Usage.(Education, Research and Development)Bluetooth host Programming.Options for applicationFull documents.

Bluetooth Telecom Trainer●

●

●

●

●

●

●

●

●

USC - 7000 NIVEL PT

Ubiquitous Sensor Control System [USC-7000]

USC - 7000 NIVEL PT

Several clients of a server (slave) connected with two hands is possible, if you are building a ubiquitous lab is a favorable system.

USC-7000 system with one server and N clients consists of a single server has 10 ports can be connected to the computer, and 10 clients and can communicate with the students a small embedded system with Bluetooth 1:07 a wireless network with easy to understand and communicate directly to students to try to create a wireless communications program, a program written to determine the process can acquire. In addition to the efficiency of the equipment at low cost is possible to build a wireless lab.

USC - 5000 NIVEL PT

USC-5000 wireless control training, as well as many kinds of sensors, motors, power training using a variety of applications through a variety of future home networking, ubiquitous, telematics, industrial technology education to be applied to the control equipment. sensor , motors, power can be controlled in real time and 1:07 practice and network control hardware, production and programming exercises are available.

USC-5000 traditional wired forms embedded in the educational system beyond the future, endless development possibilities with home networking and ubiquitous system for the development of education is a device.

USC-5 thousand a simple wireless control for the education as well as various applications Through a variety of training students in the field can be applied directly to the skills that are intended to.

Ubiquitous Sensor Control Training System

USC - 5000 NIVEL PT

USC-5 thousand for the education system, as well as related hardware, wireless connectivity on a complex algorithm designed to be easy to learn Ubiquitous by the overall education system was constructed to do.

USC-5 thousand students in the breadboard circuit was built and so that practice quite figure.

●

●

●

●

●

UHN - 3000 NIVEL PTUHN - 3000 NIVEL PT

External Communications [external and internal communication between home] - by phone, remote control (ARS reulyiyong) - Ethernet and control over the network - CDMA modem using a message-passing capabilitiesInternal Control [Host and client communication] - Bluetooth / Zigbee wireless control features - Wireless LAN radio control - Infrared wireless control function - RS-485, PLC through a wired control - Lighting control (dimming included) - curtains and viewfinder, remote control blinds [motor control] - in the form of various types of embedded device control - at least in case of sending an SMS text capabilities - surveillance, intrusion, surveillance topics - information gathering capabilities through various industrial sensors

A variety of wired and wireless control, including control system capable of Sweet Home is a network training.

Appliances and communication devices in real time and can control the security system based on technology from the application to educate.

Practice areas of the ubiquitous home network equipment

●

●


RFID - DUAL NIVEL PTRFID - DUAL NIVEL PTTraining System

This RFID Training system presents the RFID operation and standardization processes. Passive tag(13.56MHz) . The passive tag does not contain a power supply, thus uses the energy transferred from a reader which results in reduced distance. Active tags has a built-in power supply that allows long-distance communication reaching to 10 meters.

Stedent can learn RFID system design skill more effectively, since RFID hardware operation can be observed through experiment. Not firmware but PC based programming trainer Air Protocol can be programmed by using C, C++ Air Protocol analysis is possible Student can experiment and comprehend transmission protocols such as anticollision and ISO 15693, EPC global

●

●

●

●

●

RFID - EPC NIVEL PTRFID - EPC NIVEL PT

Trainning by using EPC Global NetworkPractice for EPC Global Network Theory - protocol Exercise between Reader and Tag - Middleware programmingPractice for Tag Data read/writeMapping of Tag Data with real productInternet Connection between Reader and ServerDatabase Construction coindiding with Tag Data and Real productMiddleware Application

Training System[RFID-EPC]

●

●

●

●

●

●

●

RFID - 3000 NIVEL PTRFID - 3000 NIVEL PT

RFID Shopping System, which could replace the Bar-code system, can be actually applied to commercial products as well as educational use. RFID Shopping System is not the system identifing each product s price one by one like bar-code system but the system identifing the whole at short time throuhg RFID technology.That is, Reader identify the every goods prices at one time through Tags that is attached to every goods.

If the prices which is loaded into one shopping cart identified by Reader, total amount is automatically calculated and the information is transmitted to PC.

Shopping System [RFID-3000]

More detailed explaination is as below

Put the goods with tag into shopping cart.If the shopping cart passed the counter, RFID Antenna identify the UID information from every goods through the Tag and the information is transimitted to PC server.

Every goods information and its prices are displayed on PC monitor, also calculate the total amount.If user present RFID Tag(card) to Card Reader, the purchased amount is counted.

●

●

● ●


RFID - 5000 NIVEL PTRFID - 5000 NIVEL PT

By deploying RFID Reader and Antennas to the path where the goods are input and destributed, user could know the followings;

Ordering status from PC monitor which RFID operation S/W is downlodedInput information of goods such as item, price and quantity.Stock status which is stored into the rackInferior goods information which is sorted out while moving from input conveyor belt to rack.Delivery order informationDistributing goods information after transporting to ordered place

Logistic System [RFID-5000]

Above process and information is acquired by tag sticked on every goods. That is, if the good is passed over one place to another the goods information is identified by Reader, Antenna and Tag.

The information is transmitted to PC and counted its trace by RFID Logistic System. In conclusion, user can learn how to deploy and test RFID systems under real-world conditions to increase efficiency and cut costs & etc.

●

●

●

●

●

●

RFID USN - 6000 NIVEL PTRFID USN - 6000 NIVEL PT

RFID/USN-6000 is an experimental equipment to educate EPC Global Network, RFID/USN theory & Programming, Middleware application, Sensor data conversion

RFID/USN by EPC Global Network - Understanding RFID/USN Theory. - Sensor Data Processing Technology using RFID/USN.

Active Tag / Embedded System Programming - Embedded Programming Education of Sensor Data Processing using RFID/USN based on AVR Environment.

Encryption of Data which is transmitted / received between Tag and Reader - Encryption Technique of Sensor Data, and its Algorithm Processing Technology.

●

●

●

BCT - 100 NIVEL PTBCT - 100 NIVEL PT

Embedded Lab, Microprocessor Lab, I / O control, training, communication can be used in practice - practice a low-power high-performance microprocessors using the ATMEGA-128 MPU Text LCD built-in keypad, buzzer, dijiteolpoteuip / output, etc. for microprocessor using self-understanding and practice, improved embedded C programming skills are designed to give help. - RS-four hundred and eighty-five Eternet exercises and BCT-100 equipment with each other server / client in a way digital communication and control exercises You can make a new network communication protocols and can be checked directly by coding practice is - can be set by the server and the client, the communication state transfer for yourself so that you can see the basic character, ereobokgudeung provides a variety of features. - communication practice and Rox LabView I / O controller training is available

Practice basic communication equipment

Microprocessor Lab, I / O controller training, and communication can be used in practice and, RS-485 and Ethernet devices to the BCT-100 between the server / client in a way to practice digital communication and control, and direct a new network communication protocols by coding practice and is now available.


MT - 3000 NIVEL PTUsing serial communication, the chat feature Bi-directional (Full Duplex) experiment can be a voice call. Possible two-way data communication test. Unidirectional (Half Duplex) voice and data communications can experiment Propagation environments with multiple sets of simultaneous actions is silhamyi. Unit of board experiments and practical training in one system can be finished. Automatic mode (Auto mode) and manual mode (Manual mode), select the experiment possible. Equivalent level of commercial products and implementation of software programs. When selecting the automatic mode mobile communications products behave like real use. LED display. Overcharge protection

MT - 3000 NIVEL PT

Mobile Lab equipment [MT-3000]●

●

●

●

●

●

●

●

●

●

●

MT - 2000 NIVEL PTMT - 2000 NIVEL PT

Full Duplex Voice Conversation & FullDuplex Data Communication.Half Duplex Voice Conversation & HalfDuplex Data Communication.Experiment for RF interference & mobileemvironment is available.Board level and full system level experimentis available using one set.Auto Mode and Manual is selectable.Built-in Software equal to those in CommercialProducts.Operating like as Commercial Mobile Productsin Auto Mode.LED Indicator.Over Charge Protection.

●

●

●

●

●

●

●

●

●

MT - 1500 NIVEL PTMT - 1500 NIVEL PT

Allowing students to train themselves aboutboard manufacturing.Learning about parts and product through actualmanufacturing.Capable of operation measurement for each circuit.Providing PCB designed with patterns.Capable of Full Duplex voice conversation training.Capable of Half Duplex voice conversation training.Capable of Detailed Module Training at Single Board Level.Training in full set experiment with fourboards combined.

●

●

●

●

●

●

●

●


CMT - 5000 NIVEL PTCMT - 5000 NIVEL PT

This device serves as a base station and mobile communication base station's overall practical training course is possible, base stations and base stations and mobile diagnostic changes in the parameters is possible.

Cellular Integrated Training System

MW - 5000 -2000 NIVEL PT

Micro wave band most commonly used in practice by the active devices and passive components provided in the textbook Microstrip Line Microwave Theory and Design Theory applied to the device directly to the device is designed and manufactured so that you can see and measure the content is being. Transmission system with a combination of devices to configure and connect your computer to enable the communication consists . The software that came with your computer using the program text and file transfer through the system possible by the practice, modulation and microwave devices and communications systems were configured to acquire knowledge. This method uses the FSK modulation frequency the 2.4GHz ISM band, the transfer rates can be up to 14,400 bps. -MW-five thousand: 5.8GHz ISM band . device lab parts kit for sale, and provided with reference to the standard set for students to design microwave devices were .

Microwave Communication Training System

MW - 5000 -2000 NIVEL PT

MW - 1000 NIVEL PTMW - 1000 NIVEL PT

Microstrip RF design theory and the theory applies directly to the microwave device design, fabrication and measurement can try hands-on kit comes with a set of standards and practices of students in the ever-use microwave technology to help educate

Microwave Training System


WATS - 2002 NIVEL PTWATS - 2002 NIVEL PT

Calibration function. • emulation experiments by Mycom and hardware implementation. • a user interface using the Windows GUI. • Practice the antenna can be manufactured

Wave and Antenna Training System

WIMAX - 5000 NIVEL PTWIMAX - 5000 NIVEL PT

WIMAX protocol stacks based on the MAC (Media Access Control) layer design of the software as a platform for education, environment, MontaVista Linux and embedded software design practice, OFDM (Orthogonal Frequency Division Multiplexing) modem (Modulation & DEModulation) helps the understanding of . educational platform AP (Access Point: BS) and UE (User Equipment: terminal), two hardware components, and sample programs and educational materials, specifications and manuals, and documentation is provided.

WiMAX (IEEE802.16d) Communication Training System

GSM - 5000 NIVEL PTGSM - 5000 NIVEL PTGSM Trainer

GSM - 5000 is the training enabling users to study GSM/gprs communicationprotocol and to experience overall knowledges about mobile communication through GSM module control.To control the GSM module, there is advanced set of AT Commands according to GSM ETSI ( European Telecommunications Standard Institutes)GSM - 5000 has full training contents of Command Level Study on AT Commands

This trainer is designed to instruct the students System operation, Theory,Programming, Servicing, Problem diagnosis of GSM cellular mobiles system.GSM - 5000 is mainly used for students to learn fundamentals in moblie communicationsystems such as mobile station network entry, calling process, network signals, AT Commands, Audio communication, Short message services... etc.

The training covers yhe command level study whit AT Commands, GPRS Intenet Connection, Multiplexer Protocol training and Hadware test experiments, Introduce of Embedded OS system and GUI programming on GSM - 5000 throuhg theprovided source codes.

GSM - 5000 is based upon GSM cellular phone and allows for connection to PC for operation and programming.


MGT - 3000 NIVEL PTMGT - 3000 NIVEL PTMobile Game Trainer

This trainer enables user to learn about J2ME Programming,hoe to developed J2ME Mobile Games and J2ME Network Server/Client. Also the can learn the porting and testing to J2ME Mobile games by connecting to real Cellular Mobile ( GSM type)

Functions

A student can learn how to developed mobile games basedon J2ME ( Java2 Mobile Edition ) Platform.since this toolkit provide j2me tutorial, example code andMobile Phone Emulator software.A student can get advance skill for developing mobilegames with example code and Mobile Game Toolkit ServerA student can get advenced skill for porting and testingmobile games to real cellular phone with example codeand Mobile Game Toolkit Server.Mobile Game Toolkit Server can be used Network GameServer when student develop mobile network game withusing mobile phone Emulator.

●

●

●

●

GPS - 5000 NIVEL PTGPS - 5000 NIVEL PT

CMTS - G - 7000M NIVEL PTCMTS - G - 7000M NIVEL PT

GPS Trainer GPS technology is widely being used for PDA, Smart phone, Navigation system .. etc. GPS - 5000 is the GPS training system enabling the user to acquire the skills of GPS technology through the practice os Satellite Position, GMT Time, Latitude, Longtitude, Speed, PDOP, HDOP, VDOP, etc using GPS Platform and NMEA0183 Protocol. User can also have a Software training about GPS protocol, Analysis, GUI of GPS on Window CE Embedded OS.

Functions● Understanding concept of GPS

Analysis of NMEA - 0183 protocolMeasurement of Latitude & Longitude

Study of DOP (PDOP, HDOP, VDOP)Development Windows CE based user ApplicationDebugging experience with serial port

●

●

●

●

●

This Cellular Mobile Network Analyzer supports various Specs like below which is covering 2G, 2,5G of mobile technologies in real time operation by connecting with real Base Station. And thus, this system has below features.

Supports Asynchronous & Synchronous: - Asynchronous (transmission) : GSM/GPRS WCDMA (UMTS) ( Synchronous (transmission) : (IS-95A,B) CDMA EVDO)

Provides real time logging and display ef Layer 1,2,3 messages, Packet messages (PPP , TCP/IP ,UDP) , and RF KPLs

Up to 2 mobile terminals and 2 scanners can be put on test simultaneously (2Voice, or 2 Data + 2 Voice/MOS)

Provides quality measurement function for Data Service (FTP , HTTP, Ping/TraceRT , E - Mail , UDP, SMS, WAP )

Voice Service (Voice MOS )

●

●

●

●

●

GSM - GPRS type, Cellular Mobile NetworkAnalyzing Solution ( Multi DM + PC bases )


CMTS -GW - 7000M NIVEL PTCMTS -GW - 7000M NIVEL PTGSM - WCDMA type, Cellular Mobile Network

Analyzing Solution ( Multi DM + PC bases )

This Cellular Mobile Network Analyzer supports various Specs like below which is covering 2G, 3G of mobile technologies in real time operation by connecting with real Base Station and real Mobile Phone.And thus, this system has below features.

Supports Asynchronous & Synchronous: - Asynchronous (transmission) : GSM/GPRS WCDMA (UMTS) ( Synchronous (transmission) : (IS-95A,B) CDMA EVDO)

Provides real time logging and display ef Layer 1,2,3 messages, Packet messages (PPP , TCP/IP ,UDP) , and RF KPLs

Up to 2 mobile terminals and 2 scanners can be put on test simultaneously (2Voice, or 2 Data + 2 Voice/MOS)

Provides quality measurement function for Data Service (FTP , HTTP, Ping/TraceRT , E - Mail , VOD-Video MOS, UDP, SMS, WAP, )

Voice Service (Voice MOS, Video Telephony, )

●

●

●

●

●

WCDMA - 5000 NIVEL PTWCDMA - 5000 NIVEL PT

ANDROID - 5000 NIVEL PTANDROID - 5000 NIVEL PT

W-CDMA Trainer

W-CDMA (Widedand Code Division Multiple Acces ) is an air interface s t a n d a r d f o u n d i n 3 g m o b i l e t e l e c o m m u n i c a t i o n s n e t w o r k s .

W-CDMA has been developed into a complete set of specifications, a detailedprotocol that defines how a mobile phone communicates with the tower,how signals are modulated, hoe data grams are structured and system interfaces are specified allowing free competition on technology elements.

W-CDMA transmits on a pair of 5MHz - wide radio channels, while CDMA 2000transmits on one or several pairs of 1.25MHz radio channels.

Smart Phone Trainer Smartphone is a mobile phone that offers more advanced computing ability and connectivity. Smartphones may be thought of as handheld computers integrated within a mobile telephone. A smartphone allows the user to install end run more advanced applications based on a specific platform.

Smartphones run complete operating system software providing a platform for application developers. So nowadays we can consider a smartphones as a Personal Pocket Computer (PPC) with mobile phone functions because these devices are mainly computers, although smaller ones than desktop computer.

Growth in demand for advanced mobile devices boasting powerful processors, abundant memory, larger screens and open operating system has outpaced the rest of the mobile phone market for several years.


*i3net Mechatronics




exercises





prototypes


simulations


storage facilities

●

●

●

●

●

Features


















experiments


To








●

Features

●

●

●


*i3net Mechatronics

KL - 800 A NIVEL PTKL - 800 A NIVEL PT

CAN BUS Autotronic Training System The KL-800 A CAN BUS Autotronic TrainingSystem is a distributed control system supported by advanced serial bus system CAN (Controller AreaNetwork). CAN is a multi-master bus with an open,linear structure with one bus line and equal nodes.The number of nodes are not limited by the protocol.

Each module of KL-800 A system is an ECU orthe interoperable device (node) on CAN BUS. Datatransfer between modules is achieved by the micro-controllers over CAN BUS. When signals and dataare sent to personal computer, the computer monitoringsystem displays the current status and data of moduleon PC screen and turns on the warning light if something

The KL-800 A system can simulate the operationof fuel injection system, ignition system and exhaustgas control. Experiments include the characteristic and operation of various sensors and actuators usedin automobiles.

CAN-compliant modules can be easily connected together using the 9-pin D-sub connectors and cables. These modules can interoperate with each other.

User-friendly GUI design allows the user to display and control modules on PC screen.

Each module is equipped with fault simulation switches for troubleshooting practice.

Features●

●

●

is wrong.

KL - 800 NIVEL P - PTKL - 800 NIVEL P - PT

Autotronic Training System The whole system has been modularizedto provide electronic and automotive courseswith step-by-step experiments on technological e d u c a t i o n a l t r a i n i n g .

All theoretical ,experimental and practicallearning procedures are supported by a personalc o m p u t e r a n d d e d i c a t e d s o f t w a r e .

The KL-800 can simulate the operation of fuel injection system, ignition system, and thecontrol of exhaust gas, etc. Experiments includethe sensors characteristic and operation ofvarious sensors and actuators monitored bym i c r o p r o c e s s o r o n t h e m a i n u n i t .

89C51 computer interface monitor control

Data of fuel injection, ignition and exhaust gas can be acquired and monitored by computer.

Can be assembled as the injection system

With trouble-shooting simulation function

Switch-off input / output function when trouble-shooting is made

Features

●

●

●

●

●

*i3net Mechatronics

MS - 6000 NIVEL P - PTMechatronics Training System

MS - 6000 NIVEL P - PT

It is well known that Mechatronic design becomes more and more important in automation field today. MS-6000 is a total solution for Mechatronics training, including mechanical design process, mechanical structure design, mechanism and transmission design, electronic and sensor components and PLC, total 5 major units. The MS-6000 is expected to offer completed and enriched education to trainees.

Features

With 6-Stations modular production system, mechatronics training includes distributing, testing, processing, handling, assembly and storing stations that can be operated separately or integrally. The modular production system stations allow varying simulation of real production processes that exist in industry field. The system is universal, industry-based, modular and flexible for further expansion.

●

●

●

Students can learn the entire process of production such as feeding, processing, etc... Each station simplifies the training of operation and can be expanded sequentially step by step through building complex automated procedure.

●

●

PS - 1000 NIVEL P - PTPS - 1000 NIVEL P - PT

Pneumatic Training System It is well known that “Factory Automation” is an indispensable measure to reduce labor cost, improve production efficiency and achieve higher product quality, which is widely adopted by electronic, semiconductor, LCD and mechanical factories. In factory automation, “air pressuring” plays a very essential

The “PS-1000” is launched to offer enriched education from basic air pressure components, advanced air-pressure loop design to PLC-based electrical control system. The trainee can be upgraded to high-level automation engineer with the help of the “PS-1000” trainer system.

Trainees get familiar with the principles and applications of various air pressure components. Trainees learn air-pressure loop design. Trainees learn PLC programming, including architecture, instructions and ladder diagram

●

Features

●

●

and critical role.

HS - 2000 NIVEL PT

Hydraulic Training System

HS - 2000 NIVEL PT

It is well known that "Factory Automation" is anindispensable measure ti reduce labor cost, improveproduction efficiency and achieve higher product quality,which is widely adopted by electronic, semiconductor,LCD and mechanical factories. In factory automation,oil pressuring" plays a very essential and critical role.

The "HS - 2000" is launched to offer enriched education from basic oil pressure components, advanced oil-pressureloop design to PLC-based electrical control system. The Trainee can be upgraded to high-level automation engineerwith the help of the " HS - 2000" trainer system.

Trainees get familiar with the principles and applications of various oil-pressure loop design Trainees learn oil-pressure loop design. Trainees learn PLC programming, including architecture, instructions and ladder diagram

●

Features

●

●

*i3net Bioengineering

KL - 710 NIVEL PT

Biomedical Measurement Data Acquisition System

KL - 710 NIVEL PT

KL-710 isa complete data acquisition system that includes both hardware and software for acquisition andanalysis of life-science data. The hardware uses the DAQ interface cards from National Instrument As for the

software, it is written in LabVIEW. KL-710 system can use PC, Notebook, or PDA to acquire, analyze or store data.

The major software allows you to edit data and control the experiment process appearing on the screen. It performs four general functions: Control the data acquisition process including the analog input, analog output, digital input, digital output, pulse generation and trigger start. Perform real-time calculation including the math functions, digital filter, wave analysis, rate detection and power spectrum. Perform off-line analysis including the statistics, math functions, wave analysis, rate detection and power spectrum. There are various types for saving data.

●

Features

●

●

●

●

KL - 720 NIVEL PTBiomedical Measurement System

KL - 720 NIVEL PT

This equipment is intended for students to learn how to design specific measuring circuits and detect the basic physiological signals with practical operation. Moreover, students can understand electrical characteristics of sensor and transducer explicitly.

Features

● KL-720 contains nine modules, including Electrocardiogram Measurement, Electromyogram Measurement, Electrooculogram Measurement, Electroencephalogram Measurement, Blood Pressure Measurement, Photoplethysmogram Measurement, Respiratory Ventilation Detection, Pulse Meter and Body Impedance Detection.

● The sensors and transducers used in this equipment include pressure transducer, infrared photocoupler, strain gauge, temperature sensor and surface electrode.

● Each module has many test points for changing the frequency bandwidth and amplifier's gain. Thus students can understand the correlation between physiological signal and each circuit stage.

*i3net Mechanical

KL - 800 NIVEL P - PTKL - 800 NIVEL P - PT

Autotronic Training System The whole system has been modularizedto provide electronic and automotive courseswith step-by-step experiments on technological

All theoretical ,experimental and practicallearning procedures are supported by a personalc o m p u t e r a n d d e d i c a t e d s o f t w a r e .

The KL-800 can simulate the operation of fuel injection system, ignition system, and thecontrol of exhaust gas, etc. Experiments includethe sensors characteristic and operation ofvarious sensors and actuators monitored bym i c r o p r o c e s s o r o n t h e m a i n u n i t .

89C51 computer interface monitor control

Data of fuel injection, ignition and exhaust gas can be acquired and monitored by computer.

Can be assembled as the injection system

With trouble-shooting simulation function

Switch-off input / output function when trouble-shooting is made

Features

●

●

●

●

●

KL - 800 A NIVEL PTKL - 800 A NIVEL PT

CAN BUS Autotronic Training System The KL-800 A CAN BUS Autotronic TrainingSystem is a distributed control system supported by advanced serial bus system CAN (Controller AreaNetwork). CAN is a multi-master bus with an open,linear structure with one bus line and equal nodes.The number of nodes are not limited by the protocol.

Each module of KL-800 A system is an ECU orthe interoperable device (node) on CAN BUS. Datatransfer between modules is achieved by the micro-controllers over CAN BUS. When signals and dataare sent to personal computer, the computer monitoringsystem displays the current status and data of moduleon PC screen and turns on the warning light if something

The KL-800 A system can simulate the operationof fuel injection system, ignition system and exhaustgas control. Experiments include the characteristic and operation of various sensors and actuators usedin automobiles.

CAN-compliant modules can be easily connected together using the 9-pin D-sub connectors and cables. These modules can interoperate with each other.

User-friendly GUI design allows the user to display and control modules on PC screen.

Each module is equipped with fault simulation switches for troubleshooting practice.

Features●

●

●

educational training.

is wrong.

Technical Training & Education

Dirección: Calle 24 No. 40 - 77

PBX: 57-1- 268 1500 / FAX: 57-1- 244 4748

Bogotá D.C. - Colombia

www.i3net.com