musterring · aufbau installationsskizzen rimini.indd 6 22.11.2019 11:06:06. 7 installationsskizze...
TRANSCRIPT
RIMINI
Installationsskizzen(Bitte aufbewahren) (Stand 20.11.2019)
Musterring
Rimini Installationsskizze mit Datum.indd 1 20.11.2019 11:37:41
Kor
push
öhe=
509
Korpusbreite= 790
38 Wandhaken= 714 38
54 Zusatzsicherungswinkel= 682 54
Was
chtis
ch=
20 Waschtisch= 810
321
850
Abfluss= 395
Abf
luss
= 5
00
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 7
28
Wan
dhak
en=
781
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
W01013M79XX
Bitte beachten Sie die Lage des Abflusses und der Wasseranschlüsse
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
W01013M79XX
Bitte beachten Sie die Lage des Abflusses und der Wasseranschlüsse
2 Stand 20.11.2019
RIMINI
Inhaltsverzeichnis
Waschtisch-Hängeschränke undMineralmarmor-Waschtische Seiten 3 - 6
Hänge-Spiegelschränke Seiten 7 + 8
Hänge-Spiegel Seiten 9 + 10
Hänge-Beimöbel Seiten 11 - 14
Aufbau Installationsskizzen RIMINI.indd 2 22.11.2019 11:06:05
Kor
push
öhe=
509
Korpusbreite= 790
38 Wandhaken= 714 38
54 Zusatzsicherungswinkel= 682 54
Was
chtis
ch=
20 Waschtisch= 810
321
850
Abfluss= 395
Abf
luss
= 5
00
Eck
vent
ile=
550
Z
usat
zsic
heru
ngsw
inke
l= 7
28
Wan
dhak
en=
781
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
W01013M79XX
Bitte beachten Sie die Lage des Abflusses und der Wasseranschlüsse
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
W01013M79XX
Bitte beachten Sie die Lage des Abflusses und der Wasseranschlüsse
3Stand 20.11.2019
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
W01013M79xxWaschtisch-Hängeschrank und Mineralmarmor-Waschtisch
Aufbau Installationsskizzen RIMINI.indd 3 22.11.2019 11:06:05
4
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
BME013M81001Mineralmarmor-Waschtisch
Stand 20.11.2019
Kor
push
öhe=
509
Abfluss= 495
Korpusbreite= 990
Abf
luss
= 5
00
Eck
vent
ile=
550
Zus
atzs
iche
rung
swin
kel=
728
W
andh
aken
= 7
81
38 Wandhaken= 914 38
54 Zusatzsicherungswinkel= 882 54
Waschtisch= 1010
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
= 8
50
321
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
W01013M99XX
460
142
55
44
304
1
12
134 134 542
225
= =
810
20
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
BME013M81001
Aufbau Installationsskizzen RIMINI.indd 4 22.11.2019 11:06:06
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
5Stand 20.11.2019
Kor
push
öhe=
509
Abfluss= 495
Korpusbreite= 990
Abf
luss
= 5
00
Eck
vent
ile=
550
Zus
atzs
iche
rung
swin
kel=
728
W
andh
aken
= 7
81
38 Wandhaken= 914 38
54 Zusatzsicherungswinkel= 882 54
Waschtisch= 1010
Was
chtis
ch=
20
Obe
rkan
te W
asch
tisch
= 8
50
321
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
W01013M99XX
W01013M99xxWaschtisch-Hängeschrank und Mineralmarmor-Waschtisch
460
142
55
44
304
1
12
134 134 542
225
= =
810
20
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
BME013M81001
Aufbau Installationsskizzen RIMINI.indd 5 22.11.2019 11:06:06
6
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
BME013M10101Mineralmarmor-Waschtisch
Stand 20.11.2019
20
1010
505 505
233,91 541,65 233,91
44
304
1
12
225
5
5
142
460
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
BME013M10101
20
1010
505 505
233,91 541,65 233,91
44
304
1
12
225
5
5
142
460
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
BME013M10101
Wandhaken 744 28 28
Korpusbreite 800
Wan
dhak
en 6
65
38
Kor
push
öhe
703
KR16= 810
KR
16=
16
DP1
6= 1
6
Elektroanschluss 400
Ele
ktro
ansc
hlus
s 35
0
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00580XX
Aufbau Installationsskizzen RIMINI.indd 6 22.11.2019 11:06:06
7
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
SEKE00580xxHänge-Spiegelschrank
Stand 20.11.2019
20
1010
505 505
233,91 541,65 233,91
44
304
1
12
225
5
5
142
460
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
BME013M10101
Wandhaken 744 28 28
Korpusbreite 800
Wan
dhak
en 6
65
38
Kor
push
öhe
703
KR16= 810
KR
16=
16
DP1
6= 1
6
Elektroanschluss 400
Ele
ktro
ansc
hlus
s 35
0
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00580XX
Aufbau Installationsskizzen RIMINI.indd 7 22.11.2019 11:06:06
8
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
SEKE00510xxHänge-Spiegelschrank
Stand 20.11.2019
38
Höh
e W
andh
aken
= 6
65
Kor
push
öhe=
703
28 Wandhaken= 944 28
Korpusbreite= 1000
KR16= 1010
KR
16=
16
16
Ges
amth
öhe=
735
Elektroanschluss 500
Ele
ktro
ansc
hlus
s 35
0
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00510XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00510XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00510XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00510XX
Höh
e= 7
00
Breite= 800
63 63 Wandhaken= 674
77
El.-Anschl.= 400
El.-
Ansc
hl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01180XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01180XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01180XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01180XX
Aufbau Installationsskizzen RIMINI.indd 8 22.11.2019 11:06:07
9
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
FEEN01180xxHänge-Spiegel
Stand 20.11.2019
38
Höh
e W
andh
aken
= 6
65
Kor
push
öhe=
703
28 Wandhaken= 944 28
Korpusbreite= 1000
KR16= 1010
KR
16=
16
16
Ges
amth
öhe=
735
Elektroanschluss 500
Ele
ktro
ansc
hlus
s 35
0
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00510XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00510XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00510XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
SEKE00510XX
Höh
e= 7
00
Breite= 800
63 63 Wandhaken= 674
77
El.-Anschl.= 400
El.-
Ansc
hl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01180XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01180XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01180XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01180XX
Aufbau Installationsskizzen RIMINI.indd 9 22.11.2019 11:06:08
10
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
FEEN01110xxHänge-Spiegel
Stand 20.11.2019
Höh
e= 7
00
Breite= 1000
63 63 Wandhaken= 874
77
El.-Anschl.= 500
El.-
Ansc
hl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01110XX
Kor
pus
700
Höh
e W
andh
aken
662
3
8
28 Wandhaken 264 28
Korpus 320
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
OKT073217XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
OKT073217XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
OKT073217XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
OKT073217XX
Aufbau Installationsskizzen RIMINI.indd 10 22.11.2019 11:06:08
11
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
OKT073217xxHänge-Beimöbel
Stand 20.11.2019
Höh
e= 7
00
Breite= 1000
63 63 Wandhaken= 874
77
El.-Anschl.= 500
El.-
Ansc
hl.=
350
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
FEEN01110XX
Kor
pus
700
Höh
e W
andh
aken
662
3
8
28 Wandhaken 264 28
Korpus 320
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
OKT073217XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
OKT073217XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
OKT073217XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
OKT073217XX
Aufbau Installationsskizzen RIMINI.indd 11 22.11.2019 11:06:09
12
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
ULL553233xxHänge-Beimöbel
Stand 20.11.2019
Kor
pus
770
Korpus 300
Höh
e W
andh
aken
524
2
46
28 Wandhaken 244 28
Ges
amth
öhe=
780
Gesamtbreite= 320
AP10= 322
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
ULL553233XX
Höh
e Ko
rpus
125
0
38
28 28
Korpusbreite= 300
Höh
e W
andh
aken
121
2
Wandh. 244
Ges
amth
öhe=
126
0
Gesamtbreite= 320
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MLL543233XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MLL543233XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MLL543233XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MLL543233XX
Aufbau Installationsskizzen RIMINI.indd 12 22.11.2019 11:06:09
13
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
MLL543233xxHänge-Beimöbel
Stand 20.11.2019
Kor
pus
770
Korpus 300
Höh
e W
andh
aken
524
2
46
28 Wandhaken 244 28
Ges
amth
öhe=
780
Gesamtbreite= 320
AP10= 322
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
ULL553233XX
Höh
e Ko
rpus
125
0
38
28 28
Korpusbreite= 300
Höh
e W
andh
aken
121
2
Wandh. 244
Ges
amth
öhe=
126
0
Gesamtbreite= 320
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MLL543233XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MLL543233XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MLL543233XX
Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
MLL543233XX
Aufbau Installationsskizzen RIMINI.indd 13 22.11.2019 11:06:10
14
InstallationsskizzeBohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhen
drilling point for screew hooks, dimensions for mounting and drain
RIMINI
HLW013233xxHänge-Beimöbel
Stand 20.11.2019
Kor
pus
1685
Korpus 300
Höh
e W
andh
aken
164
7 3
8
28 Wandh. 244 28
Gesamtbreite= 320 Der Elektroanschluss ist nur vom Fachmann nach DIN EN 60364 durchzuführen!
VORSICHT Diese Hinweise dienen der Vermeidung von Sach- und PersonenschädenBei Missachtung und daraus entstandenen Schäden übernehmen wir keine Haftung.• Die Montage muß durch fachkundiges Personal erfolgen.• Beachten Sie die beiliegenden Montageanleitungen.• Montieren Sie bei Waschtischunterschränken die beiliegenden Zusatzsicherungswinkel
HINWEIS: Technische Änderungen und Irrtümer vorbehalten! Aktuellster Stand auf www.musterring.com
Connection to power supply should be carried out only by a qualified technicianand according to both IEC60364 and national regulations in force!
CAUTION These instructions are intended to prevent personal injury or property damage.We will not be held responsible in case of disregard.• Assembly must be carried out by skilled personnel.• Take notice of enclosed installation instructions.• Assemble the included additional safety brackets for vanity base cabinets.
NOTICE: Technical changes and errors reserved! Latest status at www.musterring.com
www.musterring.com
14.11.2019
Bohrlochhöhen für Schraubhaken, Anschlussmaße und Abflusshöhendrilling point for screew hooks, dimensions for mounting and drain
HLW013233XX
Aufbau Installationsskizzen RIMINI.indd 14 22.11.2019 11:06:10