MXL/MXLV Enclosuress &EquipmentModels: MME-3, MBR-MP, MLE-6, MBR-3MP, MDL-1, MDB-1,MDG-1, MHD-1, MHD-2, MHD-3, MHD-4

ENGINEER AND ARCHITECT SPECIFICATIONS

5056CATALOG NUMBER

l Enclosure & Door Package (MME-3)

l Standard Size MXL Enclosure

l Removeable Module Mounting Plate (MBR-MP)

l Hinged Locking Door with Optional Inserts forClear Lens, Grill, Blank Plate

l Mounting for (1) MMB or PSR-1 and Up to 3Cardcages (MOM or OMM)

l Listed

l Enclosure & Door Package (MLE-6)

l Large Size MXL Enclosure

l Removeable Module Mounting Plates (MBR-MP &MBR-3MP)

l Hinged Dual Lock Door with Optional Inserts forClear Lens, Grill, Blank Plate

l Mounting for (1) MMB or PSR-1 and Either Up to 6Cardcages (MOM or OMM) or Up to 3 Cardcagesand 2 EL-410 Amplifiers (MSR-1 Rail Kits)

l Listed

MBR-MP

DescriptionThe MME-3 and MLE-6 enclosures provide a complete setof hardware for mounting all MXL and MXLV modules forvarious system size requirements from small to large.

Included in the enclosure series are backbox and doorsets, removeable mounting plates and clear lenses,louvered ventiliation grill plates, and blank plates for usewith the enclosure doors. Dead front covers for use alone,with switch and/or annunciator modules and with a stripprinter are also available.

This equipment is approved for operation over the tempera-ture range of 0°C to 49°C.

MME-3MXL/V Standard Size EnclosureThe MME-3 enclosure set consists of a sheetmetal backboxand door with keylock. The MME-3 can be used for eitherthe MXL System, MXLV Voice Command Console, MXLRTransponder, MXLRV Voice Transponder or AmplifierEquipment (using the MSR-1 Rail Kit). To mount MXL/MXLVmodules in the MME-3, the MBR-MP removeable modulemounting plate is required. Using the MBR-MP mountingplate (1) MMB or (1) PSR-1 and up to 3 expansioncardcages (MOM or OMM) can be mounted in the MME-3enclosure. When used to mount MXL amplifiers (EL-410),the MBR-MP is not required, instead up to (3) EL-410amplifiers may be installed in the MME-3 by using (3) MSR-1 rail kits. When amplifiers are mounted in any enclosurealways install MDG-1 grills in the door for proper ventilation.

MME-3 is designed for surface of semi-flush mounting andincludes various knockouts for wire and conduit entry. Thedoor in the MME-3 set has two cutouts for either clearlenses, blank plates or grills depending on the application,and contains a key lock.

MBR-MPMME-3 and MLE-6 MXL Module Mounting PlateThe MBR-MP MXL/V Module Mounting Plate is required foruse in both MME-3 and MLE-6 enclosures to mount all MXLand MXLV equipment. MBR-MP is not necessary if theMME-3 and MLE-6 enclosures are to be used only formounting of amplifiers (EL-410).

The MBR-MP is a removeable MXL/V module mouting platethat allows the enclosure MME-3 or MLE-6 to be shipped tothe job site for installation of wiring and conduit, while thesystem hardware (electronics) is mounted to the studs on

the MBR-MP, pre-wired, programmed and tested prior todelivery and installation at the job site. This allows forquicker, more efficient system start ups with less chance ofthe sensitive electronics being damaged while field wiringand conduit are connected to the system enclosure.

MBR-MP mounting plate bolts to either the MME-3 or MLE-6 enclosures for easy installation on the job site. The MBR-MP also has handles to allow easy transport and mounting.The MBR-MP contains mounting studs for (1) MMB or PSR-

MLE-6 w/ 6 Cardcages

1, (1) PIM-1, (1) TBM-1, and up to (3) MOM or OMMcardcages or 2 cardcages and (1) TSP-40 Printer (samemounting studs as the MBR-2 enclosures).

The MBR-MP is ordered and shipped seperately from theMME-3 and MLE-6 enclosures.

MLE-6MXL/V Large Size EnclosureThe MLE-6 enclosure set consists of a sheetmetal backboxand door with two key locks. The MLE-6 can be used foreither the MXL system, MXLV Voice Command Console,MXLR Transponder, MXLRV Voice Transponder or AmplifierEquipment (using the MSR-1 rail kit). To mount MXL/Vmodules in the MLE-6, the MBR-MP removeable modulemounting plate is required with the MBR-3MP optionallyavailable for use. Using the MBR-MP mounting plate (1)MMB or PSR-1 and up to (3) expansion cardcages (MOMor OMM) can be mounted in the MLE-6. If additional

MBR-MP w/ MXL Equipment Connected

cardcages are required, the MBR-3MP optional cardcagemounting plate can also be installed in the MLE-6 below theMBR-MP. The MBR-3MP allows mounting of an additional(3) MOM or OMM module expansion cardcages.

Various combinations of hardware can be installed in theMLE-6. If only amplifiers are to be installed in the MLE-6, noMBR-MP or MBR-3MP plates are required. Instead up to (5)EL-410 amplifiers can be installed by using (5) MSR-1 railkits. The MLE-6 can also be used to mount up to (3) MXLcardcages and (2) amplifiers. This configuration would betypical of a remote voice transponder cabinet. In thisconfiguration (1) MBR-MP would be used in the upper halfof the MLE-6 to mount the MXL modules, while the lowerhalf would use (2) MSR-1 rail kits to mount up to (2) EL-410amplifiers.

MBR-3MPMLE-6 Optional Cardcage Mounting PlateThe MBR-3MP is an optional MXL/MXLV cardcage mount-ing plate for use exclusively in the MLE-6 enclosure. Wheninstalled in the MLE-6 backbox, the MBR-3MP adds theoption of mounting up to an additional (3) MOM or OMMexpansion cardcages.

MBR-3MP

MLE-6 w/ MBR-MP & (2) Amplifiers

The MLE-6 is designed for surface or semi-flush mountingand includes various knockouts for wire and conduit entry.The door supplied with the MLE-6 set has (3) cutouts foreither clear lenses, blank plates or grills, depending on theapplication. The door also contains (2) key locks — keyedthe same.

MLE-6 w/ Door Closed

Various combinations of dead front mounting plates arepossible with the MLE-6 enclosure. A typical MXLV installa-tion would have (1) MKB-2 at the top, and (2) MHD-3 deadfront plates in the middle (for (14) VSM/VLM/VFM modulesper plate) and (1) or (2) MHD-2 lower dead front plates.

MDL-1Clear LensThe MDL-1 is a clear Plexiglas® lens which fits in either oneof the two openings in the MME-3 enclosure door or in oneof the three openings in the MLE-6 enclosure door. Onelens is included in the MDL-1 package.

MDL-1

MDB-1Sheet Metal Blank PLateThe MDB-1 is a sheet metal blank plate which fits in eitherone of the two openings in the MME-3 enclosure door or inone of the three openings in the MLE-6 enclosure door.One blank plate is in the MDB-1 package.

MDB-1

MDG-1Louvered Ventilation PlateThe MDG-1 is a louvered plate that mounts in either one ofthe two openings in the MME-3 enclosure door or in one ofthe three openings in the MLE-6 enclosure door. The MDG-1 is required on MXLV systems to provide ventilation for theenclosures when using either the EL-410 or the ZAC-30audio amplifiers in that enclosure. One MDG-1 plate isincluded in the MDG-1 package.

MDG-1

MHD-2

MHD-1

MHD-1Upper or Middle Dead Front PanelThe MHD-1 is a hinged sheet metal panel which attachesto either the MME-3 or the MLE-6 enclosure backbox. It fitsin either the upper or the middle section of the MME-3backbox or the upper or either of the two middle sections ofthe MLE-6 backbox. It has an opening with a cover plate forthe TSP-40 printer when used and attaches to thebackboxes with screw fasteners. When in place it coversand protects modules and wiring, providing dead frontconstruction in that area.

MHD-4Middle Dead Front Plate for the Switch/LED/Fan ControlModules with Printer CutoutThe MHD-4 is a hinged sheet metal panel that attaches tothe MME-3 or the MLE-6 backboxes. It fits in the middlesection of both enclosures. It has two rows for mounting ofVSM-1 Switch Modules, VLM-1 LED Annunciator Modules,VFM-1 Fan Control Modules or VSB-1 Blank Modules. Eachrow has space to mount (4) modules, for a total of (8)modules per MHD-4. The MHD-4 also has a cutout todisplay the TSP-40 Internal Thermal Strip Printer. The MHD-4 mounts to the backboxes with screw fasteners. It ishinged for easy access to the rear of the modules andinside of the enclosure. When in place, it covers andprotects modules and wiring, providing dead front con-struction in that area.

MHD-2Lower Dead Front PanelThe MHD-2 is a hinged sheet metal panel which attachesto either the MME-3 or the MLE-6 backboxes. It mounts inthe lower section on the MME-3 and on the lower twosections of the MLE-6 backbox. It has no openings andattaches to the enclosures with screw fasteners. When inplace, it covers and protects modules and wiring, providingdead front construction in that area.

MHD-3

MHD-3Middle Dead Front Plate for Mounting Switch/LED/FanControl ModulesThe MHD-3 is a hinged sheet metal panel that attaches tothe MME-3 or MLE-6 backboxes. It fits in either the middleof the upper sections of these enclosures. It has openingsfor two rows of VSM-1 Switch Modules, VLM-1 LED Annun-ciator Modules, VFM-1 Fan Control Modules or VSB-1Blank PLates. Each row can mount up to (7) modules for atotal of (14) modules per MHD-3. The MHD-3 attaches tothe backboxes with screw fasteners. It is hinged for easyaccess to the rear of the modules and inside of the enclo-sure.

MSR-1

VSB-1Switch Blank PlateThe VSB-1 is a blank plate which covers one opening ineither the MHD-3 or MHD-4 dead front panels. It attachesto the MHD with screw fasteners.

VSB-1

MSR-1Rail KitThe MSR-1 is a System 3 type rail kit which fits into eitherthe MME-3 or the MLE-6 enclosures. The MSR-1 comeswith a U-bracket and a Z-bracket. It allows modules such asthe EL-410 amplifier, PS-35 Power Supply, BC-35 BatteryCharger, MOI-7 I/O Interface, MID-16, MOD-16, PS-5A,SYS3-MPFO for mounting either the D2300CP or theA2300CP fiber optic interface modules or the CCU inter-face, or any other System 3 type module required to bemounted in the MME-3 or the MLE-6 enclosures.

When used in the MME-3 enclosure (3) MSR-1 Rail Kits canbe installed to mount up to three rows for up to (3) EL-410amplifiers. When used in the MLE-6, up to (5) MSR-1 RailKit rows can be installed to allow mounting up to (5) EL-410amplifiers. When the MLE-6 enclosure is used with theMBR-MP mounting plate to install MXL or MXLV equipment,up to (2) MSR-1 Rail Kit rows can also be installed in theMLE-6 for mounting of either (2) EL-410 amplifiers or somecomplement of System 3 type mount modules.

Ordering Information

Model Description PartNumber

MME-3MXL/V Medium/Standard Enclosure(Backbox and door pkg.) RequiresMBR-MP to mount MXL/V modules.

500-694209

MBR-MPRemoveable module mountingplate needed for MME-3 and MLE-6Enclosure. Allows mounting of upto 3 cardcages (MOM/OMM)

500-694210

MME-3R Red version of MME-3 Enclosure. 500-694892

MME-KITKit consisting of (1) MME-3 and (1)MBR-MP Enclosure and ModuleMounting Plate

599-694894

MME-KIT/RKit consisting of (1) MME-3R and (1)MBR-MP. Red Enclosure andModule Mounting Plate

599-694895

MLE-6MXL/V Large Enclosure (Backboxand door pkg.) Requires MBR-MPto mount MXL/V modules.

500-694530

MBR-3MP

Cardcage Expander Mounting Platefor use with MLE-6 allows mountingof up to (3) additional cardcages(MOM/OMM) in the MLE-6 for amaximum total of (6) MOM or OMMcardcages in the MLE-6

500-694532

MLE-6R Red version of MLE-6 Enclosure. 599-694893

MLE-KITKit consisting of (1) MLE-6, (1)MBR-MP and (1) MBR-3MP Largeenclosure and both modulemounting plates

599-694530

MLE-KIT/RKit consisting of (1) MLE-6R, (1)MBR-MP and (1) MBR-3MP. Redlarge enclosure and both modulemounting plates

599-694893

MDL-1 Clear Lens (1) 500-692070

MDB-1 Sheet Metal Blank (1) 500-692070

MDG-1 Louver Door Plate (1) 500-692213

MHD-1 Dead Front Panel (1) 305-092071

MHD-2 Dead Front Panel (1) 305-092072

MHD-3 Dead Front Panel (1) 305-092073

MHD-4 Dead Front Panel (1) 305-092074

VSB-1 Switch Blank (1) 500-692075

MSR-1 Rail Kit 545-592078

MHD-4

April 1996New Issue

NOTICE: The use of other than Cerberus Pyrotronics detectors and bases with CerberusPyrotronics control equipment will be considered a misapplication of Cerberus Pyrotronicsequipment and as such void all warranties either expressed or implied with regards to loss,damage, liabilities and/or service problems.

Cerberus Pyrotronics50 East Pearce StreetRichmond Hill, OntarioL4B, 1B7 CNTel: (905) 764-8384FAX: (905) 731-9182

Cerberus Pyrotronics8 Ridgedale AvenueCedar Knolls, NJ 07927Tel: (201) 267-1300FAX: (201) 397-7008

4/9610M

CPY-IGPrinted in U.S.A.

Mounting Diagram

MME-3 Backbox

MLE-6 Backbox