mygale i - sept-tools · en mygale 4 a- in the upper part of the trolley, loosen the lever (1) then...
TRANSCRIPT
![Page 1: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/1.jpg)
MYGALEPartable scaffold with load balancer.
495 932 i
![Page 2: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/2.jpg)
EN MYGALE
2
Dimension - Folded l : 1550 mm w : 400 mm H : 450 mm
Weight 31kg
Height : 2300 mm
Balance load 6-10 Kg
Dimension H : 2800 mm w: 1250 mm
Cable length 2400 mm
Specifications
![Page 3: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/3.jpg)
EN MYGALE
3
CE Declaration of Conformity
We hereby declare that this product: MYGALE
Serial Number: ………………………….Is in line with the following provisions in force:
2004/108/CE (directive CE « CEM ») 2006/42/CE (directive CE MACHINES)
Manufactured bySEPT- ACCESSA
ZI Le temple42640 St Romain la Motte - FRANCE
Agency responsible of compliance assessment:APAVE
SAS Apave SudeuropeAgency of St Etienne
10, allée du Technopôle42950 St Etienne Cedex 9
Technical file prepared by : S.DÉCHAVANNE
___________
MBH DéveloppementProduct Quality Manager
![Page 4: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/4.jpg)
EN MYGALE
4
A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening the lever.
B- WARNING: The stop screw (4) must be on the outer part of the boxes.
Installation wall position
1
3
4
2
![Page 5: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/5.jpg)
EN MYGALE
5
C- In the central part of the trolley, loosen the lever (1) then slide the lower tube (2) in the flange (3), before tihtening the lever.
D- The pads (4 & 5) must be in line on the same side.
![Page 6: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/6.jpg)
EN MYGALE
6
E- In the lower part of the trolley, loosen the 2 knobs (1) then slide the tube (2) in two flanges (3) before tightening the 2 wheels (1) .
1
2
3
![Page 7: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/7.jpg)
EN MYGALE
7
Assembling of the handles:-Assemble parts «a» and «b» using the screw «c» .-Then assemble the handle to part «e», around the tube «d», using the knob «f» and screw «g» .The handle must be on the same side as the wheels.
![Page 8: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/8.jpg)
EN MYGALE
8
In the upper position, slide the top tube (1) into the openings (2) until it stops.F - The stop screw must be on the outer part of the box in order to enter in the box via the protrudes on the steel plate, until it stops as illustrated.
Installation «Scaffolding» position
1
3
2
![Page 9: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/9.jpg)
EN MYGALE
9
G - In central part of the trolley, loosen the lever and slide the lower pipe bend in the flange completely, before tightening the lever fully.
In the central part of the trolley, loosen the lever (1) then slide the lower tube (2) in the flange (3), before tightening the lever. Warning: Direct the elbowed part of the tube downwards, as shown.
1
3
2
![Page 10: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/10.jpg)
EN MYGALE
10
H - In the lower part of the trolley, loosen the 2 knobs (1) then slide the tube (2) in the two flanges (3) before tightening the 2 knobs (1).
12
3
![Page 11: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/11.jpg)
EN MYGALE
11
4 - Position the Mygale on the scaffolding and then lock in position by arranging the 2 handles (1) against the scaffold platform (as shown below):
1
![Page 12: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/12.jpg)
EN MYGALE
12
Clamping of the balancerThe balancer has an anti-tilt safety system that allows it to slide on the tubes without any risk of derailment.To block or unblock the safety, push the handle (1) towards the trolley then do a quarter to turn until the handle before releasing. You must feel the lock, the handle is spring loaded.To lock: turn the handle clockwise.To unlock: turn the handle anticlockwise.
1
![Page 13: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/13.jpg)
EN MYGALE
13
Bottom view:
UNLOCK
LOCKLOCK
![Page 14: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/14.jpg)
EN MYGALE
14
Adjusting the balancer:Warning! Before fixing the machine, check that the total weight of the hung machine does not exceed the maximum load capacity of the balancer (10 kgs).
- Hook the machine and adjust the spring tension according to the weight:
1.) Increase the tension:
To increase tension, turn the drive shaft (Pos. 1) in the anti clockwise with a wrench.
2.) Decrease the spring tension:
To decrease the spring tension, place the key on the drive shaft (Pos. 1) slightly and turn the spring clip at the back of the balancer clockwise (Pos. 2).Important !! Exert a light opposite pressure with the key.A slight displacement of the key by turning simultaneously rotating the spring clip decreases the spring tension.
![Page 15: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/15.jpg)
EN MYGALE
15
ADJUSTINGTHEVOLTAGEBALANCER
• Allourbalancersareadjustedtoatensionof5-6kgatthefactory• Ourbalancersareequippedwitha"stopchute"device;Thisdevicecanactivateduring
transportorhandlingoftheequipment.PleaseperformtheVOLTAGEINCREASEoperationtounlockthedevice.
• INCREASEOFVOLTAGE:• Turntheaxisinthedirectionindicated(anti-clockwisedirection)usingaflatkeyn°12tothe
desiredtensionNEVERTURNINTOREVERSE!
REDUCTIONOFVOLTAGE:
• Removethescrewthatholdstheplasticcover.• Placeyourflatkeyn°12ontheadjustmentspindleandholditthere.
• Pullthefreerodofthespringslightlytowardsyou,whileaccompanyingtherotationofthe
shaftwithyourkey.DONOTLEAVETHEAXLEFREEINTHISMANIPULATION.
• Reassembletheplasticcoverwiththescrew.• Youcannowincreasethevoltageofthebalancer.
![Page 16: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/16.jpg)
EN MYGALE
16
Adjust the length of the trolley
I - To adjust the height of the trolley Mygale, unscrew the 2 knobs (one on each shanks), then slide the lower part in the flanges, before tightening the 2 knob.Be careful to set the two sides at the same height, to maintain a perfect horizontality on the guiding system of the balancer.
Setting
1
2
![Page 17: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/17.jpg)
EN MYGALE
17
1 - Fix the machine on the hook of the balancer:
OPERATION
![Page 18: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/18.jpg)
EN MYGALE
18
2 - You can sand the entire surface in between the two parts:
Grinding Area
![Page 19: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/19.jpg)
EN MYGALE
19
3 - Lateral displacement:You can move the Mygale by sliding it laterally in order to continue your work. For this, pull the 2 handles toward you rotate the whole trolley on wheels:
It is then possible to move the Mygale laterally on its two wheels to the desired place and rest it against the wall.
![Page 20: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/20.jpg)
FR MYGALE
Dimension plié long : 1550 mm large : 400 mm Haut : 450 mm
Poids : 31kg
Hauteur maxi de travail : 2300 mm
Charge équilibré : 6-10 Kg
Dimension déplié maxi Haut : 2800 mm larg : 1250 mm
Dimension déplié mini Haut : 1750 mm larg : 1250 mm
Longueur de cable de l’équilibreur
2400 mm
Caractéristique
![Page 21: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/21.jpg)
FR MYGALE
Déclaration CE de conformité
Par la présente, nous déclarons que le produit : Chariot de ponçageType : MYGALE
Numéro de série :_____________est conforme aux dispositions suivantes en vigueur :
2006/42/CE (directives CE MACHINES)2006/95/CE (directives CE MACHINES)
Normes : ISO 12100-1 : 2003; ISO 12100-2 : 2003; ISO 4309 : 2004;EN 349 : 1993+A1 : 2008; DIN 15112 : 1979; DIN 15400 : 1990;
DIN 15404-1 : 1989___________
Fabriqué par : SEPT
ZI Le Temple42640 St Romain la Motte - FRANCE
____________
Organismes d’évaluation de la conformité :APAVE
SAS Apave SudeuropeAgence de St Etienne
10 Allée du TechnopôleBP741
42950 St Etienne Cedex 9
___________
Responsable de la constitution du dossier technique : S. DÉCHAVANNEMBH DéveloppementResponsable Qualité
St Romain la Motte, le 17/09/2016
![Page 22: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/22.jpg)
FR MYGALE
A- En partie haute du chariot, dévissez le levier (1) puis faites coulisser le tube supérieur (2) dans la bride (3) jusqu’à la butée, avant de visser le levier (1) à fond.
B- ATTENTION : La vis de butée (4) doit se trouver sur les côtés extérieurs des boitiers (Vis à gauche pour boitier à gauche, vis à droite pour boitier à droite).
MONTAGE POSITION MURALE
1
3
4
2
![Page 23: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/23.jpg)
FR MYGALE
C- En partie centrale du chariot, dévissez le levier (1) puis faites coulisser le tube inférieur coudé (2) dans la bride (3) , avant de visser le levier (1) à fond.
D- Il faut que les 2 plots (4 et 5) soient alignés sur le même côté du chariot Mygale.
1 2
3
4
![Page 24: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/24.jpg)
FR MYGALE
E- En partie basse du chariot, dévissez les 2 molettes (1) puis faites coulisser le tube rond (2) dans les 2 brides (3) avant de visser les 2 molettes (1) à fond.
1
2
3
![Page 25: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/25.jpg)
FR MYGALE
Assemblage des poignées : -Assembler les pièces « a » et « b » à l’aide des vis « c », pour former une poignée.-Assembler ensuite la poignée à la pièce « e », autour du tube « d », à l’aide la molette « f » et de la vis « g ».L’ensemble fini doit être dirigé vers le même côté que celui des roulettes.
![Page 26: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/26.jpg)
FR MYGALE
En position haute, faites coulisser le tube supérieur (1) dans les ouvertures prévues (2)jusqu’à la butée. Attention, il faut orienter la poignée (3) vers le bas, comme sur l’illus-tration. F – La vis de butée doit être orientée vers l’extérieur du boitier, afin d’entrer dans le coffret via le décroché sur la tôle, et pouvoir buter comme sur l’illustration.
MONTAGE POSITION « ECHAFAUDAGE »
1
3
2
![Page 27: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/27.jpg)
FR MYGALE
G - En partie centrale du chariot, dévissez le levier (1) puis faites coulisser le tube infé-rieur coudé (2) dans la bride (3) entièrement, avant de visser le levier (1) à fond.Attention, il faut orienter la partie coudée du tube vers le bas, comme sur l’illustration.
1
3
2
![Page 28: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/28.jpg)
FR MYGALE
H - En partie basse du chariot, dévissez les 2 molettes (1) puis faites coulisser le tube rond (2) dans les 2 brides (3) avant de visser les 2 molettes (1) à fond.
12
3
![Page 29: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/29.jpg)
FR MYGALE
4 – Mettre en place le chariot Mygale sur l’échafaudage puis verrouiller la position en dis-posant les 2 poignées (1) en butée contre le plateau d’échafaudage (comme sur l’illustration ci-dessous) :
1
![Page 30: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/30.jpg)
FR MYGALE
Bridage équilibreurLe chariot équilibreur possède une sécurité anti basculement qui permet à l’ensemble de coulis-ser sur les tubes, sans risques de déraillement.Pour bloquer ou débloquer la sécurité, poussez la poignée (1) en direction du chariot puis faites faire un quart de tour à la poignée avant de la relâcher. Vous devez sentir le verrouillage, la poignée étant montée sur ressort.Blocage : tourner la poignée dans le sens horaire.Déblocage : tourner la poignée dans le sens anti horaire.
1
![Page 31: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/31.jpg)
FR MYGALE
![Page 32: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/32.jpg)
FR MYGALE
Réglage de l’équilibreur :Attention ! Avant de fixer l’appareil, vérifier que le poids total de la machine accrochée ne dépasse pas la capacité de charge maximale de l’équilibreur (10 kgs).
- Accrocher la machine et régler la tension du ressort en fonction du poids :
1.) Augmenter la tension du ressort :
Pour augmenter la tension du ressort, tourner l’arbre d’entrainement (Pos. 1) dans le sens inverse des aiguilles d’une montre avec une clé.
2.) Diminuer la tension du ressort :
Pour diminuer la tension du ressort, placer la clé sur l’arbre d’entrainement (Pos. 1) et tourner légèrement l’attache à ressort à l’arrière de l’équilibreur dans le sens des aiguilles d’une montre (Pos. 2). Important !! Exercer une légère pression contraire avec la clé. Un léger déplacement de la clé en tournant simultanément l’attache à ressort diminue la ten-sion du ressort.
![Page 33: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/33.jpg)
FR MYGALEREGLAGEDEL’EQUILIBREURDETENSION
• Tousnoséquilibreurssontréglésàunetensionde5-6kgensortied’usine• Noséquilibreurssontéquipésd’undispositif«stopchute»;cedispositifpeuts’activerlors
dutransportoud’unemanipulationdel’équipement.Veuillezeffectuerl’opérationAUGMENTATIONDELATENSIONpourdébloquerledispositif.
AUGMENTATIONDELATENSION:
• Tournerl’axedanslesensindiqué(sensAntiHoraire)àl’aided’unecléplaten°12jusqu’àlatensiondésirée.NEJAMAISTOURNERDANSLESENSINVERSE!
REDUCTIONDELATENSION:
• Retirerlavisquitientlecacheplastique.• Positionnervotrecléplaten°12surl’axederéglageetmaintenezlàavecattention.
• Tirerlégèrementlatigelibreduressortversvous,toutenaccompagnantlarotationdel’axe
avecvotreclé.NEPASLAISSERL’AXELIBRELORSDECETTEMANIPULATION.
• Remonterlecacheplastiqueaveclavis• Vouspouvezmaintenantprocéderàl’augmentationdetensiondel’équilibreur.
![Page 34: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/34.jpg)
FR MYGALE
Réglages en hauteur du chariot
I – Pour régler en hauteur le chariot Mygale, dévissez les 2 leviers (1) (1 sur chaque « jambe »), puis faites coulisser la partie basse (2) dans les brides, avant de visser les 2 molettes à fond.Attention à bien régler les 2 côtés à la même hauteur, afin de conserver une parfaite horizontalité sur le système de guidage de l’équilibreur.
REGLAGES
1
2
![Page 35: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/35.jpg)
FR MYGALE
![Page 36: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/36.jpg)
FR MYGALE
![Page 37: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/37.jpg)
FR MYGALE
3 – Déplacement latéral :Une fois le ponçage de cette surface terminé, vous pouvez déplacer le chariot Mygale latéralement afin de continuer votre travail.Pour cela, tirer les 2 poignées vers vous afin faire pivoter l’ensemble du chariot sur ses roues :
Il est ensuite possible de déplacer le chariot Mygale latéralement sur ses 2 roues, puis de le reposer contre le mur une fois le déplacement terminé.
![Page 38: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/38.jpg)
FR MYGALE
note :
![Page 39: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/39.jpg)
FR MYGALE
![Page 40: MYGALE i - Sept-Tools · EN MYGALE 4 A- In the upper part of the trolley, loosen the lever (1) then slide the top tube (2) in the flange (3) until it the stop, before tightrening](https://reader031.vdocuments.net/reader031/viewer/2022022716/5c14abd709d3f245038bf92f/html5/thumbnails/40.jpg)
ACCESSA SASZ.I.
42640 SAINT ROMAIN LA MOTTE FRANCE
+33 (0) 477 606 074 +33 (0) 477 641 090