mystik image standards and installation guidelines...5. remove masking tape hinge and the panel...
TRANSCRIPT
1 May 2014
Table of Contents
1 Mystik Canopy/Island Image Guidelines
4 Mystik Pump Image Guidelines
6 Mystik Building Image Guidelines
7 Sign System: 6x6
8 Sign System: 5x5
9 Sign System: 5x10
9 Sign System: 4x8
10 12'UniversalPoleSpecifications
11 Mystik Material List
1 May 2014
Mystik Canopy/Island Image Guidelines
Primary Fascia ElevationMystik Red
Wordmark
Island CurbMystik BronzeBollards
Mystik Medium Red
Primary X-Form
Secondary Fascia ElevationSecondary X-Form
Mystik Bronze
2 May 2014
Mystik Canopy/Island Image Guidelines
Tools Required
•UtilityBlade•MarkerorPencil•PinorNeedle•PlasticSqueegee•Sponge•RivetBrush
•RulerorTape•MaskingTape•IsopropylAlcohol•SoapandWater•PaperTowels•IndustrialHeatGun
Red and X-Form Decals Application
Step1:InstallMystikredsolidvinylallaroundthe canopy (provided in 8’ sections).
Afterapplyingthedecalsonthecanopy,all canopyseamsshouldbecutandtuckedinto theseamwiththesqueegeeedge.
Step2:Determinewhetherthefasciaisprimaryor secondary,basedonvisibility/order.
InstalltheX-Formson1primaryand1 secondaryside.MakesuretheX-formsmeet andlineupontheedgewherethesecondary and primary meet.
Step3:InstalltheMystikwordmarkfromtheright edgeoftheprimarysideandcenteredtopto bottom.
Distanceofthewordmarkfromtheright edgeisdeterminedbythecanopyfascia height.Refertoillustrationaboveand charttotheright.
***Mystik wordmark must not intrude into the X-Form
Surface Preparation
1.Surfacemustbeabove50oFandbelow100oF. Surfacemaybeheatedorcooledmechanically beforeapplication.
2.Liftedorlooseedgesmustbetrimmedand smoothpriortoapplication.
3.Cleansurfacewithsoapandwater.Rinseanddry.
4.Cleansurfacewithisopropylalcoholusinglint-free papertowels.
25’w x 40”h
21”w
25’w x 40”h
24.15”h
19.258”h
76.57”w
OVERVIEW OF A FINISHED IMAGED CANOPY
CANOPY VINYL LETTER DECAL SIZING
Canopy Fascia Heights Letter Spacing From Right EdgeMystik Vinyl Letter Size
0"-29"Custom -
Please consult yourCITGO Region Brand Manager
30"-39" 24" 21"
40"-49" 33" 28"
>50"Custom -
Please consult yourCITGO Region Brand Manager
Custom - Please consult your
CITGO Region Brand Manager
Custom - Please consult your
CITGO Region Brand Manager
3 May 2014
Application Instructions
1.Applyamaskingtapehingeverticallyatthecenter ofthedecal.(FIGURE1)
2.Foldhalfofthedecalhinge,peelofflinertotape hinge,cutlineralonghingeanddiscard. (FIGURE2)
3.Foldbackholdingdecaloffsurface.Startingat centeroftapehinge,squeegeedecalusingvery firm,verticaloverlappingstrokes.Throughout applicationkeeptheunappliedportionofthe decaloffthesurface,allowingittotouchonly fromsqueegeepressure.(FIGURE3)
4.Whileapplyingthedecalsonthecanopy,ensure thatallcanopyseams are cut and tucked into theseamwithsqueegeeedge.(FIGURE4)
5.Removemaskingtapehingeandtheremaining liner.Repeatstep3.
6.Continueapplyingdecalsoverlappingeachone 1/8"to3/16".Trimwithrazorbladeifnecessary.
7.Wipewithpapertowel.(FIGURE5)
Finishing
1. Puncture decal in several places around rivet heads.Pressoutairwithsqueegee.
2.Userivetbrushandheatfromanindustrialheat guntomakethedecalconformtotherivethead. (FIGURE6)
3.Removewhitepaperpremaskbypullingitback ontoitself.(FIGURE7)
4.Eliminateairbubblesbypuncturingdecalat theedgeofthebubble(notthecenter)withapin or needle.
5.Pressouttheentrappedairstartingattheopposite edgefromthepuncture.(FIGURE8)
6.Re-squeegeealledgesandoverlaps.Reheatand userivetbrushtosealfilmoverrivets.
Mystik Canopy/Island Image Guidelines
FIGURE 3
FIGURE 7
FIGURE 6
FIGURE 8
Panel Seam
FIGURE 5
FIGURE 1 FIGURE 2
Panel Seam
FIGURE 4
4 May 2014
Mystik Pump Image Guidelines
72
2.5”
2.5”
2.5”
2.5”
2.5”
2.5”
• Removeexistinggraphicsonthedispensers.
• Prepandcleansurfacepriortoinstallation. Thesurfacemustbecleanandsmoothand freeofanywaxorsilicone,oxidationorloose flakingpaint.
• Surfaceandairtemperature:Minimumof50oF
• Valancedecalsareprovidedin3pieces.
• X-Formsaretobeinstalledonthefrontfaceofthe pumpandsideswillbesolidredvinyl.Youwill have2piecesofgraphicstowrap1valance.Trim any excess material.
• InstalltheMystikwordmark2.5"awayfrom therightedgeofthefrontfaceofthevalanceand centeredtopandbottom.
Wordmark Produced & Applied Separately2.5” From Right Front Edge of Valance
Side ofValance
Front of Valance (36”W)
2.5”
6.5”
8”
OVERVIEW OF FINISHED PUMP DISPENSER (3 HOSE)
Dieselpumpswillbeimagedwithgraphicspicturedatright:(onesizedecalcuttofit)
Product Dispenser Decals-RefertoCITGODecal Image Standards
72
2.5”
2.5”
2.5”
OVERVIEW OF FINISHED PUMP DISPENSER (1 HOSE)
5 May 2014
Mystik Pump Image Guidelines
2.5” Wordmark Produced & Applied Separately2.5” From Left and Top Edges
Dashed Line Indicates 42”W x 37.25”H Visual Area
2.5”
5”
4.375”
16”
Pumpskirt Decal for Gas Pumps Only
• Removeexistinggraphicsonthedispensers.
• Prepandcleansurfacepriortoinstallation. Thesurfacemustbecleanandsmoothand freeofanywaxorsilicone,oxidationorloose flakingpaint.
• Pumpskirtdecalsareprovidedin2pieces.
• Installthegraphicsbyliningupthebottomleft edgeofthepump.Wraptheentiredoorwiththe graphics,includingthesidereturnsonthedoor. Trimanyexcessmaterial.
• InstalltheMystikwordmark2.5"awayfromthe topandleftsideedgeofthedoor.Seephotos onpreviouspageforplacementonasinglehose versusa3-hosedispenser.
• Refertovisualimageabove.
• Installallotherpumpgraphicsprovidedfor thedispensers,includingoctanedecals,federal warningdecalsandproductIDdecals.
• Removepumptoppersonthe currentdispensers.• Risersmustbecleanandfreeofvinyl.• Canopysupportpolesandislandcurbs paintedMystikBronze.• IslandguardpolespaintedMystik MediumRed.• SigncabinetsandsignpolespaintedMystikBlack.
6 May 2014
Mystik Building Image Guidelines
36”H Fascia
Mystik Red Stripe DecalSupplied in 8’ Sections
CIT MRD40
Credit Card Door Decal
Panel Seam
1.Removeallexistinggraphicsandcleanareaprior to installation.
2.InstallMystikredvinyl.Theseareprovidedin 8' sections.
3.Mystiklogoistobecenteredtoptobottomand lefttorightonthefrontfascia.
Afterapplyingthedecalsonthebuildingfascia,allfasciaseamsshouldbecutandtuckedintotheseamwiththesqueegeeedge.(Seeillustrationbelow)
Panel Seam
PleasecontactyourRegionBrandManagerwithanyquestions:
CentralRegionTeddHupp:832-486-1966Email:[email protected]
CentralRegionEricKolber:832-486-5947Email:[email protected]
NortheastRegionSuePascarella:832-486-5717Email:[email protected]
SouthernRegionSusanEdge:832-486-1995Email:[email protected]
Note: Mystik image is required only if the building has any other brand image elements at the time of conversion.
7 May 2014
Sign System: 6x6
REGULARUNLEADED
MID GRADEUNLEADED
SUPERPREMIUM
SIGN SPECIFICATIONSAmps: 7.0Net Weight:6’ x 6’ sign: 190 lbs.6’ x 6’ sign: 190 lbs.Total Weight: 380 lbs.Area: 72 square feetCabinet color: Mystik Black
POLE & FOUNDATION SPECIFICATIONSDesign Windload: 30 PSF/100 MPHPole Supports: 8” x 6” x 3/16” W.T. x 24’ tubesBaseplates: 1 1/4” x 9” x 15”Anchor Bolts: 1” x 42”Foundation: 2’-6” Dia. x 7’-3” Deep
Amps: 3.49Watts: 380Net Weight: 190 lbs.Area: 36 S.F.Lumens: 1050 P.S.F.
(6) F72T12 H.O.C.W. Lamps
(1) Electronic Ballast (3.49 amps)
"8/5 37
"0-'6"0-'6
72 15/16"
6'-0"
79”
73”
30” Dia. Caisson
6”x8” Steel Tube
Concrete PierFoundations100MPH (30psf)
3”x5”ReinforcedHandhole3/4” Dia. Rigid Conduit
(one caisson only)
#4 Rebar Ties12” O.C.
(5) #5 Rebars, 6’-3” longequally spaced around an24” dia. circle
(4) 1” Dia. x 42” long Anchor BoltsEach bolt has (2) nuts & (2) washers
7’-3
”D
eep
"61/1 71
"0-'4211 1/2"
6x6 SIGN PRICE SIGN FONT3 PRODUCT D/F
6’x6’MystikID Sign
6’x6’3 ProductPrice Sign
Front Elevation
"61/1 7111 1/2"
Mystik Black
8 May 2014
Sign System: 5x5SIGN SPECIFICATIONSAmps: 7.0Net Weight:5’ x 5’ sign: 145 lbs.5’ x 5’ sign: 145 lbs.Total Weight: 290 lbs.Area: 50 square feetCabinet color: Mystik Black
POLE & FOUNDATION SPECIFICATIONSDesign Windload: 30 PSF/100 MPHPole Supports: 8” x 6” x 3/16” W.T. x 24’ tubesBaseplates: 1 1/4” x 9” x 15”Anchor Bolts: 1” x 42”Foundation: 2’-6” Dia. x 7’-3” Deep
Amps: 3.49Watts: 340Net Weight: 145 lbs.Area: 25 S.F.Lumens: 1296 P.S.F.
(5) F60T12 H.O.C.W. Lamps
(1) Electronic Ballast (3.49 amps)
66 1/4”
60 1/4”
30” Dia. Caisson
6”x8” Steel Tube
Concrete PierFoundations100MPH (30psf)
3”x5”ReinforcedHandhole3/4” Dia. Rigid Conduit
(one caisson only)
#4 Rebar Ties12” O.C.
(5) #5 Rebars, 6’-3” longequally spaced around an24” dia. circle
(4) 1” Dia. x 42” long Anchor BoltsEach bolt has (2) nuts & (2) washers
7’-3
”D
eep
"0-'425x5 SIGN PRICE SIGN FONT
3 PRODUCT D/F
5’x5’MystikID Sign
5’x5’3 ProductPrice Sign
Front Elevation
”0-’5”0-’5
5’-0”
"51
10 1/2"
REGUNLD
SUPERPREM
MIDUNLD
"8/3 16
60 1/4"
"51
10 1/2"
Mystik Black
9 May 2014
Sign System: 5x10
SIGN SPECIFICATIONSAmps: 7.0Net Weight: 280 lbs.Area: 50 square feetWatts: 680Lumens: 1100 P.S.F.Cabinet color: Mystik Black
SIGN SPECIFICATIONSAmps: 2.34Net Weight: 180 lbs.Area: 32 square feetWatts: 420Lumens: 1150 P.S.F.Cabinet color: Mystik Black
(10) F60T12 H.O.C.W. Lamps
(5) F96T12 H.O.C.W. Lamps
(4) F96T12 H.O.C.W. Lamps(4) F96T12 H.O.C.W. Lamps
(2) F60T12 H.O.C.W. Lamps
(2) Electronic Ballast (@ 3.49 amps)
(2) Electronic Ballast (@ 3.49 amps)
(1) Electronic Ballast (2.34 amps)(1) Electronic Ballast (2.34 amps)
M-SS-5x10BBETWEEN POLE MOUNT
M-SS-4x8BBETWEEN POLE MOUNT
M-SS-5x10CCENTER POLE MOUNT
M-SS-4x8CCENTER POLE MOUNT
PRICE SIGN FONT3 PRODUCT D/F
PRICE SIGN FONT3 PRODUCT D/F
"4/3 11
8 1/2"
"4/1 05
"4/1 05
97 5/8"97 5/8"
”0-’4
8’-0”
"51
10 1/2"
"16
"8/3 16
119"119 1/4"
”0-’5
10’-0”
REGUNLD
SUPERPREM
MIDUNLD
REGUNLD
SUPERPREM
MIDUNLD
Sign System: 4x8
10 May 2014
12' Universal Pole Specifications: 5'x10' and 4'x8' Sign Systems
Foundation Design Notes1. Concreteshallhaveaminimumcompressive
strengthof3,000PSIat28days.2. ReinforcingbarsshallbeASTMA615grade60
steel.3. Concretefootingsaredesignedusingasoil-
bearingforceof250lbs./sq.ft.perfootofdepthlateral.Ifthissoilconditiondoesnotexist,itistheErector'sresponsibilitytohaveanewbasedesignedfortheexistingsoilconditionsbyaLicensedStructuralEngineer.
4. AnchorboltsaretobemanufacturedaccordingtoAASHTOspecificationM314-90grade55.
11 May 2014
Material List
CANOPY
MC100 24” Mystik Decal
MC101 33” Mystik Decal
MPXD40 RedCanopyOverlay,40”x96”Decal
MPXD50 RedCanopyOverlay,50”x96”Decal
MPXP40 40”PrimaryX-FormDecalKit
MPXP50 50”PrimaryX-FormDecalKit
MPXS40 40”SecondaryX-FormDecalKit
MPXS50 50”SecondaryX-FormDecalKit
PUMPS
MQ305 Valance,DecalSet13”x92”withMystik
MQ307 PumpSkirt(1side)32”x52”RedVinylwithMystik
MPX203 BlackDecal(1side)40”x96”OverlayPumpNozzelArea
RefertoPumpImageStandards,Section3inyourCITGOImageStandardsandInstallationGuidelinesbinder,forappropriatefederallabeling,Safetyandinformationdecals,environmentaldecals,pumpnumberdecals,productIDsandoctanedecals.
SIGNS
NM-SS-4X8,3P 4’x8’CompleteSignSystem,ID,3Products,Regular,Mid,Super,Fonts,PoleChanger
NM-SS-4X8,1P 4’x8’CompleteSignSystem,ID,1Product,Regular,Fonts,PoleChanger
NM-SS-5X10,3P 5’x10’CompleteSignSystem,ID,3Products,Regular,Mid,Super,Fonts,PoleChanger
NM-SS-5X10,1P 5’x10’CompleteSignSystem,ID,1Product,Regular,Fonts,PoleChanger
NM-SS-5X5,3P 5’x5’BetweenthePoles,CompleteSignSystem,ID,3Products,Regular,Mid,Super,Fonts,PoleChanger
NM-SS-6X6,3P 6’x6’BetweenthePoles,CompleteSignSystem,ID,3Products,Regular,Mid,Super,Fonts,PoleChanger
PAINT
BP9534BZ BronzeGloss,Water-BaseEnamel(CanopyPoles,Curbs)
CC2312RED MediumRedGloss,Water-BaseEnamel(Bollards)
CC2669 CITGOBlackGloss,Water-BaseEnamel(SignPoles)
12 May 2014
©2014 CITGO Petroleum CorporationMystik, as well as the Mystik logo, trade name and trade dress, and all related marks are registered trademarks of CITGO Petroleum Corporation.CITGO Petroleum Corporation does not own, operate or maintain the retail locations bearing the Mystik logo, trade name and trade dress.
BD_140217_004