na 2006 general catalogue

8/17/2019 Na 2006 General Catalogue

1/81

THE INTERNATIONAL CATALOG


2/81

picture not mandatory


941731 - MANUAL PENETROMETER

941734 - AUTOMATIC PENETROMETER


9417582 - GREASE WORKER


941736 - OUTFIT FOR LUBRICATING GREASE


941810 - OUTFIT FOR BITUMEN

See other applications under ASTM D 217 - D 937 - D 1321 - D 1403

SCOPEThis test method covers the determination of the penetration of semi-solidand solid bitumous materials.

OTHER STANDARDS

IP 49 - NFT 66004 - ISO 3997 - DIN 52010

REF. 941734This compact automated instrument uses the latest electronic technolo-gies. It is equipped with keyboard, LCD display, user friendly software andstepper motor for penetration depth as low as 0.01 mm, needle (or cone)

holder, magnifying lens and low voltage illuminator, centering guide, RS232Coutput and accessories for automatic level detection for conductive sam-ples.

REF. 941731This manual penetrometer includes a large table on levelling feet with spiritlevel, a manual release mechanism and a dial indicator in 0.1 mm.Outfit (needle, holder, sample container, ...) not included.

REF. 9417582This compact twin-unit automated grease worker uses electronic counter

to control the strokes number and is delivered with 2 cups and 2thermometers.Supply 400V 3ph.

ACCESSORIES (for all standards)

BITUMEN ACCESSORIES (for D5)

outfit is needle + holder + weight 50g + 2 containers

LUBRICATING GREASES ACCESSORIES (for D217)

outfit is cone + holder + container

941759 Plunger plate ASTM (51 holes)

11504 ASTM thermometer 17C



518063 Standard needle 2.5 g (up to 350 u.)

941732 Calibration kit for automatic penetrometer

941737 Holder 47.5 g941810 Outfit for penetration of bitumous material

941812 Add itional weight 100 g

941815 Add itional weight 50 g

9418140 Long needle 2.5 g (up to 500 u.)

21712 Sample container one use 55x35 mm (pack of 300)

9418181 Sample container A l. 55x70 mm (>200 u.)

9418191 Sample container Al. 55x57 mm (up to 500 u.)9417371 Bitumen automatic level detection device

941739 Grease cutter w ith blade

941736 Outfit for consistency of lubricating grease

941737 Holder 47.5 g941738 Standard cone 102.5 g

941750 Hand grease w orker w ith cup and thermometer

941751 Worker c up only

941760 Plunger plate Fed. Spec. (270 holes)

9417411 Sample container 76x63 mm

9410759 Thermometer for grease w orker

27322 Spatula 30x200 mm

230 V1 A

50 Hz23 Kgw 260 mm

d 320 mmh 540 mmon request115V 60Hz

5.6 Kgw 180 mmd 180 mmh 560 mm

400/3ph V3 A50 Hz29 Kg

w 400 mmd 260 mmh 500 mm

518066 Sample container Aluminium 55x35 mm

27794 Water bath model RE 112 (max.100°C)


3/81

ACCESSORIES (for D937)

outfit is cone + container + holder


outfit is shouldered needle + container + weight + holder


SPARE PARTS FOR ALL MODELS

SCOPEThis test method covers the determination of the loss in mass (exclusive ofwater) of oil and asphaltic compounds when heated.

OTHER STANDARDS

IP 45 - NFT 66011

REF. 941875Strictly conform to ASTM requirements because of exclusive thermocou-ple sensor installed on the rotating shelf with the control thermometer, thisis a double wall illuminated oven with glass window, 9 place revolving shelf,9 aluminium containers, thermometer and instruction manual.

ACCESSORY

SPARE PARTS


941875 - REVOLVING-SHELF OVEN


941811 - OUTFIT FOR PETROLEUM WAXES


941735 - OUTFIT FOR PETROLATUM

941738 Standard cone 102.5 g

941735 Outfit for consistency of petrolatum

941737 Holder 47.5 g

9417412 Sample container 100x65 mm w ith cover

941816 Needle w ith shoulder 2.5 g

941737 Holder 47.5 g

941811 Outfit for consistency of petroleum w axes

941815 Additional weight 50 g

941820 Sample container w ith bas e plate

941742 ¼ sc ale cone and plunger (9,38 g)

941743 ½ scale cone and plunger (37,5 g)

9417421 ¼ scale grease w orker (manual operation)

9417431 ½ sc ale grease w orker (manual operation)

27322 Spatula 30x200 mm

518063 Standard needle 2.5 g (up to 350 u.)

941816 Needle w ith shoulder 2.5 g

941737 Holder 47.5 g

941738 Standard cone 102.5 g

9418172 Sample c ontainer b rass nickel plated

9418762 Bulb 230V/15W


21712 Sample container one use 55x35 mm (pack of 300)

230 V16 A50 Hz55 Kg

w 640 mmd 580 mm

h 680 mm

9417343 Magnifying glass for ref. 941734

9417341 Light bulb for ref. 9417349417342 Flexible light for ref . 941734


9417421 - GREASE WORKER FOR ¼ CONE9417431 - GREASE WORKER FOR ½ CONE



4/81

SCOPE

This test method covers the determination of the softening point of bitumenin the range from 30 to 157°C using the ring and ball apparatus immersedin distilled water (30 to 80°C), glycerin (80 to 157°C), or ethylene glycol (30to 110°C).

OTHER STANDARDS

IP 58 - NFT 66008 - ISO 4625 - DIN 52011

REF. 20761Ring and ball apparatus two-test unit including frame for 2 rings with centeringguide, a pack of 10 shouldered rings, a pack of 10 balls, one beaker, one

15C thermometer and one 16C thermometer.

ACCESSORY

SPARE PARTS

REF. 40100The NBA 440 model, fully automatic tester, is equipped with ticket printer,Pt 100 probe and all equipment to perform test with shouldered rings.

SPARE PARTS


20761 - MANUAL TESTER


40100 - AUTOMATIC RING & BALL NBA 440




17487 Calibrated beaker

20764 Straight rings (pac k of 10)

20765 Shouldered rings (pack of 10)

25666 Conical rings (pac k of 10)

40103 Detection lamp

20766 Balls (pac k of 10)

230 V

10 A50 Hz20 Kgw 260 mmd 535 mm

h 500 mmon request115V 60Hz

20766 Balls ( pack of 10)

40138 Ring and ball craddle

40390 Printer paper Seyko DPU 414 (roll)

40139 Pt 100 probe for NBA 440

40154 Heating element (1000 W)

20764 Straight rings ( pack of 10)

20765 Shouldered rings (pack of 10)25666 Conical rings (pac k of 10)

26302 Electric stirrer w ith heater type E


5/81

SCOPE

This test method covers the determination of the flash point, by tag manualand automated closed testers, of liquids with a viscosity below 9.5 cst at25°C and a flash point below 93°C.

REF. 40600The NTA 440 model, fully automatic tester, is equipped with ticket printer,cup and cover, cup support, Pt 100 probe, detection cable and gas tubing.

OPTIONAL ACCESSORIES

SPARE PARTS


40600 - TAG CLOSED TESTER NTA 440

SCOPEThis test method covers the determination of the specific gravity and den-sity of semi-solid bitumous materials, asphalts cements, and soft tar pitches

by use of a pycnometer.

OTHER STANDARDNFT 66007

REF. 24615Thermostatic bath (capacity 16 l) made of stainless steel with cooling coil

and lid.

NECESSARY ACCESSORY


23203 Cryos tat TLC 30 - 5 liters (-30/+60°C ±.1)

23204 Cryos tat TLC 40 - 11 liters ( -45/+20°C ±.05)

40318 Pt 100 probe

40611 Heating element 250W (each)

40610 TAG cup

40612 Detection cable


20847 Pyc nometer A ( 24/30 ml)

23229 Pycnometer C ( 24/30 ml)

23230 Pycnometer D ( 24/30 ml)24624 Pycnometer B ( 24/30 ml)

230 V

2.2 A50 Hz18 Kgw 260 mmd 535 mm



PYCNOMETER


40613 Electric ignitor (NCL440/NTA440)


6/81

See other applications under ASTM D 850 - D 1078

SCOPEThis test method covers the distillation of natural gasolines, motor gasiolines,aviation gasolines, aviation turbine fuels, special boiling point spirits, naphtas,

white spirit, kerosines, gas oils, distillate fuel oils, and similar petroleumproducts, utilizing either manual or automated equipment.

OTHER STANDARDSIP 123 - NFM 07002 - ISO 3405 - DIN 51751

REF. 941227“Front View” distillation apparatus, single unit (receiver on left), with electric

heater and temperature control by variotronic, complete with 125 ml flask,100 ml receiver, 2 thermometers, Ceran board 50 and 100 mm.

REF. 941228“Front View” distillation apparatus, single unit (receiver on right), with elec-tric heater and temperature control by variotronic, complete with 125 mlflask, 100 ml receiver, 2 thermometers, Ceran board 50 and 100 mm.

REF. 942228Distillation apparatus model NDI 210 (receiver on right), with electric heatercontrolled by “Pulsotronic” and condenser bath regulated by electronic headproviding external cryostate connections, complete with 125 ml flask,100 ml receiver, silicone stopper, 2 thermometers, Ceran board 50and 100 mm.

SPARE PARTS

OPTIONAL ACCESSORY

DISTILLATION FLASK 125 ml REF. 24019

1 to 9 pieces

10 to 49 pieces50 and more


941228 - FRONT VIEW DISTILLATION (right)

941251 Glass cooling bath for 941227 and 228 (2l)

19425 100 ml graduated receiver (D86)

20348 Ceran board hole 50 mm

24019 125 ml distillation flask (D86)

40101 Heating element (1000W)



40049 Silicone stopper for condenser (pack of 50)

40050 Silicone stopper ther mometer (pack of 50)

230 V

6 A50 Hz23 Kgw 500 mmd 450 mm


40078 Karanape board (38 mm)


19422 200 ml distillation flask ( D1078)


942228 - DISTILLATION APPARATUS semi-automatic

230 V6 A50 Hz21 Kgw 380 mm



7/81

REF.40000Model NDI 440, automatic stand alone unit operable through PC keyboardand standard 17” colour screen or alternatively connectable to external ex-isting Pentium PC with Windows software. Basic unit with distillation flasksand CERAN boards as per mentioned methods, 100 ml receiver, 5 ml resi-

due receiver, sensor adjuster, Pt 100 sensor, automatic dry point kit, printerand more.

MAIN CONSUMABLES

REFERENCE FLUID (see page 76)

SPARE PARTS

DISTILLATION FLASK 125 ml REF. 24019

1 to 9 pieces10 to 49 pieces50 and more


40000 - AUTOMATIC DISTILLATION NDI 440

ASTM D 86 continued

19096 Seepage fingers (pack of 10)

19420 100 ml distillation flask (D86 - gr 0)



26111 100 ml graduated receiver glass foot ( D86)

40052 125 ml black bottom flask (D86)

40065 Teflon centering stopper for Pt 100 probe

40067 Teflon centering stopper for dry point

40073 Dry point thermocouple



12609 5 ml graduated cylinder for residue (D86)

20348 Ceran board hole 50 mm

21944 Ceran board hole 100 mm (NDI 440)

24019 125 ml distillation f lask (D86)

27581 Ceran board hole 25 mm (benzene-toluene D850)

40049 Silicone stopper for condenser (pack of 50)

40076 Pt 100 flask temperature measuring probe

40043 200 ml black bottom flask (D1078)

230 V

9 A50 Hz60 Kgw 480 mmd 660 mm





40101 Heating element (10 00W)

40097 Maintenance kit for ND I440


8/81

29038 - OIL TEST CENTRIFUGE

See other applications under ASTM D 96 - D 893 - D 1796 - D 2273 - D 2709 - D 2711 - D 4007

SCOPEThis test method covers the determination of the precipitation number of

steam cylinder stocks and black oils, and can be used for other lubricatingoils.

REF. 29038Model ROTANTA 460 without cooling/heating control is suitable for ASTMD 91, D 893, D 2273, D 2709 et D 2711. Equipped with brushless motorand controlled by microprocessor.DELIVERED WITHOUT ACCESSORY.

REF. 29039Model ROTANTA 460 RHKwith cooling/heating control is suitable for ASTM

D 96 and D4007. Equipped with brushless motor and controlled by micro-processor.

DELIVERED WITHOUT ACCESSORY.

NECESSARY ACCESSORIES

See other application under ASTM D 244

SCOPE

This test method covers the empirical procedures for determining the SayboltUniversal or Saybolt Furol Viscosities of petroleum products at specifiedtemperatures between 21 and 99°C.

REF. 272381 place Saybolt viscometer, equipped with electric heater, automatic con-trol of temperature, stirring motor for water circulation, possibility to cooldown the bath by means of an external cooling system. Supplied without

accessories.


230 V7 A50/60 Hz90 Kg

w 554 mm

d 707 mmh 453 mm

29040 Rotor 4 places for c onical or pear tube

29041 Groove suspension

29042 Reducing adapter

19319 8" cone- shaped tube (100 ml)



27238 - SAYBOLT VISCOMETER

230 V

2 A50 Hz8 Kgw 260 mmd 260 mm

h 540 mm

27243 Universal Saybolt tube 1000 sec

11438 Saybolt f lask 60 ml


9/81

SCOPEThis test method describes the determination of the flash point of petro-

leum products by a manual or automated cleveland open cup apparatus.

OTHER STANDARDS

IP 36 - NF EN ISO 2592

MANUAL INSTRUMENT

REF. 942611This manual model NCL 120 includes cup and thermometer.

SPARE PARTS

SEMI-AUTOMATIC INSTRUMENT

REF. 942610The semi-automatic tester NCL 220 is equipped with electronic regulator,

and cup. The temperature slope is automatically controlled by Pt100 probe.

SPARE PARTS

AUTOMATIC INSTRUMENT

REF. 40400The fully automatic tester NCL 440 is equipped with ticket printer, Pt 100,cup, detection cable, gas tubing and RS232C output. It is provided withgas and electrical ignition system.

OPTIONAL ACCESSORY


SPARE PARTS

942611 - MANUAL CLEVELAND NCL 120


230 V

0.3 A50 Hz17 Kgw 320 mmd 580 mm


40400 - AUTOMATIC CLEVELAND NCL 440


40440 - AUTO-CLEVELAND WITH SAMPLER

941613 Cleveland cu p w ith handle


230 V0.3 A50 Hz17 Kg

w 320 mmd 580 mmh 360 mmon request115V 60Hz

230 V0.3 A50 Hz7 Kg

w 350 mmd 250 mmh 430 mm

40440 6 cups automatic sampler

40417 Standard Cleveland cup

40441 Pt 100 probe

40437 Insulated plate - f ixed

40443 Ionization ring flash point

40444 Ionization ring fire point

40439 Insu lated plate - mobile


40613 Electric ignitor (NCL440/NTA440)


941615 Stoptherm insulating board

941609 Gas t ubing diam. 2/4 mm (1 m)

941609 Gas t ubing diam. 2/4 mm (1 m)

941615 Stoptherm insulating board


942610 - SEMI-AUTO CLEVELAND NCL 220

230 V0.3 A50 Hz

10 Kgw 350 mmd 250 mmh 330 mm

9417908 Pt 100 probe (70x3 mm)

941613 Cleveland cu p w ith handle


picture not mandatory40154 Heating element (1000W)

9417444 Gloves (pair)



10/81

SCOPEThis test method covers the determination of the flash point of petroleumproducts in the temperature range from 40 to 360°C by manual or auto-

mated Pensky-Martens closed cup apparatus.

OTHER STANDARDSIP 34 - NF EN ISO 2719 - DIN 51758

MANUAL INSTRUMENTS

REF. 942614 / 615Models NPM 120, manual instruments, are delivered complete with cupand cover, thermometers and stirrer. Those models are cooled by air andequipped with a safety thermostate. Model 942614 follows method A andmodel 942615 method B.

REF. 942616Model NPM 121, manual instrument, is delivered complete with cup and

cover, thermometers and stirrer. This model is cooled by air and equippedwith a safety thermostate.This model follows method A and B.

SPARE PARTS

SEMI-AUTOMATIC INSTRUMENTS

REF. 942617 / 618Models NPM 220, semi-automatic instruments, are delivered complete withcup and cover, Pt100 probe and stirrer. Those models are cooled by air andequipped with a safety thermostate. The temperature slope is automati-

cally controlled. Model 942617 follows method A and model 942618method B.

REF. 942619The model NPM 221, semi-automatic instrument, is delivered completewith cup and cover, Pt100 probe and stirrer. Those models are cooled byair and equipped with a safety thermostate.The temperature slope is auto-matically controlled. This model follows method A and B.

SPARE PARTS


942614/615 - PENSKY-MARTENS NPM 120Manual apparatus

230 V6 A50 Hz10 Kg

w 350 mmd 250 mmh 380 mm


942616 - PENSKY-MARTENS NPM 121Manual apparatus

230 V

6 A50 Hz10 Kgw 350 mmd 250 mm

h 380 mm

941621 Heating cartridge 230V (400W)

9411930 Cup for NPM 120, 121, 220, 221

9411931 Cover for NPM 120, 121, 220, 221

9411930 Cup for NPM 120, 121, 220, 221

9411931 Cover f or NPM 120, 121, 220, 221



9417908 Pt 100 probe (70x3 mm)


942617/618 - PENSKY-MARTENS NPM 220Semi-automatic apparatus

230 V

6 A50 Hz10 Kgw 350 mmd 250 mm

h 380 mm


942619 - PENSKY-MARTENS NPM 221Semi-automatic apparatus

230 V6 A50 Hz

10 Kgw 350 mmd 250 mmh 380 mm

941621 Heating cartridge 230V ( 400W)

941609 Tube gaz diam. 2/4 mm (1 m)



941609 Tube gaz diam. 2/4 mm (1 m)


11/81

SCOPE

This test method covers the determination of water in petroleum products,tars, and other bitumous materials by the distillation method.

OTHER STANDARDSIP 74 - NFT 60113 - ISO 3733

REF. 21454Complete assembly with heating mantle, glass flask 500 ml and Liebig

condenser 400 mm and all assembly accessories.

SPARE PARTS

12852 Round bottom flask CN24/29 (500 ml)

13142 Liebig condenser CN24/29 (400 mm)

14571 Heating mantle 500 ml (230V/225W)

16252 Clamp

16324 Stand w ith rod 12 x 800 mm

16329 Univers al bosshead for ass embly

19357 Dean Stark trap (10ml in 0.1)21003 Pulse regulator (2200 W)

21455 5 ml : 1/10 Dean Stark w ith r ound bottom

21456 25 ml : 1/5 Dean Stark w ith conical bottom


40300 - AUTO PENSKY-MARTENS NPM 440

40349 Stirring connection c able

40351 Detection cable

40346 Cup for NPM 440

40347 Cover w ithout probe for NPM 440

40353 Pt 100 for NPM 440

230 V4 A

50 Hz20 Kgw 260 mm

d 535 mmh 500 mm

on request115V 60Hz

14110 Tube for pr opane gas 6x12 mm (10 m)


40380 Electric ignitor (NPM 440)

AUTOMATIC INSTRUMENTREF. 40300The NPM 440 model, fully automatic tester, is delivered complete with cupand

cover, Pt 100 probe, flexible stirrer, gas or electrical ignition system, PC serialport and ticket printer. Software allows choice of 6 methods, automatic baro-metric correction, full safeties, 2 stirring speeds, ...

OPTIONAL ACCESSORY


SPARE PARTS

21454 - WATER BY DISTILLATION APPARATUS



12/81


SCOPE

This test method is intended for use on any petroleum product.


REF. 941584Single temperature bath with 5 wells, stirrer and 6 thermometers 5C.

Cooled by dry ice.

ACCESSORY

REF. 941592Cloud and pour test cabinet, mechanically refrigerated by CFC free gases,4 compartments (0, -17, -34, -51 °C), each with 4 sleeves including testtubes, felts, 15 thermometers 5C and 5 thermometers 6C.

REF. 941595Cloud and pour test cabinet, mechanically refrigerated by CFC free gases,

1 compartment (-69 °C), with 4 sleeves including test tubes, felts, ther-mometers 5C and thermometer 6C.


SPARE PARTS

AUTOMATIC MODEL ON REQUEST


941592 - CLOUD & POUR CABINET (0 to -51°C)

941597 Dry ice machine

9415901 Felt disc (pack of 10)

9415902 Felt ring (pack of 10)




230 V16 A

50 Hz190 Kgw 1000mmd 750 mmh 1420 mm

19439 Test tube

See instrument under ASTM D 91

SCOPEThis test method covers the centrifuge method for determining sediment

and water in crude oil during field custody transfers.


13/81


SCOPE

This test method covers the determination of sulfur in petroleum products,including lubricating oils containing additives, additive concentrates, and lu-bricating greases that cannot be burned completely in a wick lamp.

OTHER STANDARDSIP 61 - NFT 60109 - DIN 51577

SCOPEThe ductility of a bituminous material is measured by the distance to which

it will elongate before breaking when two ends of a briquet specimen of thematerial are pulled apart at a specified speed and temperature.

OTHER STANDARDSNFT 66006 - DIN 52013

REF. 9418641Ductility machine with electronic regulation and digital display measurement,

for three simultaneous tests at variable speeds of 1 to 99 mm/min by stepof .1 mm, maximum pull length : 100 cm

REF. 9418642Ductility machine with electronic regulation and digital display measurement,for three simultaneous tests at variable speeds of 1 to 99 mm/min by stepof .1 mm, maximum pull length : 150 cm

ACCESSORIES

SPARE PARTS


9418641 - DUCTILITY MACHINE (1 meter)

941868 Mould w ithout brass plate

941869 Brass plate


230 V3 A50 Hz

70 Kgw 1700 mmd 330 mmh 310 mm

941866 Opal glass for ductility meter 1 00 cm

941865 Opal glass for ductility meter 150 cm

23203 Cryos tat TLC 30 - 5 liters (-30/ +60°C ±.1)

941867 Transparent cover for ductility meter


14/81

SCOPE

This test method covers the detection of the corrosiveness to copper ofaviation gasoline, aviation turbine fuel, automotive gasoline, natural gaso-line or other hydrocarbons having a Reid vapor pressure no greater than 18psi.


REF. 941220Constant temperature test bath with plain cover and drain cock, controlledby electronic thermostat, Pt 100 sensor and led heating control(max 100°C).

NECESSARY ACCESSORIES FOR ASTM D 130

SPARE PARTS

NECESSARY ACCESSORIES FOR IP 227

SPARE PARTS


941220 - TEST BATH FOR D130


941220 - TEST BATH FOR IP 227

12780 Test tube 25x150mm

24541 Single strip polishing vise

15114 Copper strip corrosion test standard

15115 Copper s trip (pack of 10)

19008 Flat glass test tube

941492 Test cylinder12067 Silicon carbide paper 240 grits

9413109 Support to hold 12 stainless steel vess el

9413125 Support to hold 40 test tubes


22505 Silicon c arbide pow der 150 mesh (1 kg)

19008 Flat glass test tube

941492 Test cylinder

9414920 "O" ring seals (pack of 10)

22505 Silicon c arbide pow der 150 mesh (1 kg)

12780 Test tube 25x150mm

941224 Cover including 3 test tubes ( amber)

9414851 Silver strip assay ing at 99.9%

9414931 Silver strip corrosion standard


9414851 Silver strip assay ing at 99.9%


230 V0.3 A50 Hz15 Kg

w 375 mmd 260 mmh 417 mm

230 V0.3 A

50 Hz17 Kg

w 375 mmd 260 mmh 417 mm

24541 Single strip polishing vise

12007 Kit condenser complete (amber glass)

22505 Silicon car bide pow der 150 mesh (1 kg)

12067 Silicon carbide paper 240 grits

9417900 Pt 100 probe (30x6 mm)

9417900 Pt 100 probe (30x6 mm)



12008 Craddle (amber glass)

12376 Test tube (amber glass)

12377 Cold-f inger condenser (amber glass)


15114 - CORROSION TEST STANDARD


15/81

SCOPEThis test method covers the determination of the color of refined oils suchas undyed motor and aviation gasoline, jet propulsion fuels, naphtas and

kerozine, and, in addition, petroleum waxes and pharmaceutical white oils.

OTHER STANDARDSNFM 07003 - DIN 51411

REF. 941520Complete improved model with daylight source built-in the base and a 3-position turret assembly (½, 1 and 2) with certified Saybolt filters reducing

the time required to make a determination and eliminating the handling ofthe standard filters and the possibility of loss and damage.

REF. 941521Same model as above but with specific heating tube for petroleum waxes.Maximum temperature of use 100 °C.

SPARE PARTS

AUTOMATIC APPARATUS

REF. 29006 ON REQUESTThe Lovibond PFX 880/P is an easy to use, automatic instrument, which

eliminates time-consuming procedures of visual methods. It is a spectro-photometer for objective colour analysis of petroleum fuels, oils, waxesand petrochemicals according to the Saybolt and ASTM Colour scales


941520 - SAYBOLT CHROMOMETER

941524 Prismatic eyepiece

9415221 O ring for graduated tube (pack of 10)

941525 Matched pair of tubes

9415203 Ar tificial daylight filter w ith c ertificate

9415206 Spare bulb

9415240 Filter w heel w ith certificate

230 V0.3 A50 Hz

8 Kgw 180 mmd 180 mmh 760 mm

on request115V 60Hz

9415222 Seal for glass disk (pack of 10)

941526 Matched pair of tubes for w axes


941521 - SAYBOLT CHROMOMETER FORPETROLEUM WAXES

230 V1 A50 Hz

8 Kgw 180 mmd 180 mmh 760 mm

on request115V 60Hz


16/81

See instruments under ASTM D 5

SCOPEThis test method covers four procedures for measuring the consistency oflubricating greases by the penetration of a cone of specified dimension,mass, and finish. The penetration is measured in 1/10 of a millimeter.

OTHER STANDARDSIP 50 - NFT 60132 - ISO 2137 - DIN 51580


SCOPEThis test method covers the determination of the heat of combustion ofliquid hydrocarbon fuels ranging in volatillty from that of light distillates tothat of residual fuels.

QUOTATION ON REQUEST


SCOPEThis test method covers the determination of the amount of carbon residueleft after evaporation and pyrolisis of an oil. It is intended to provide some

indication of relative coke-forming propensities. The method is generallyapplicable to relatively non volatile petroleum products which partially de-compose on distillation at atmospheric pressure.

OTHER STANDARDS

NFT 60116 - IP 13 - ISO 6615 - DIN 51551

REF. 941653Single unit model to be manually used including: porcelain crucible, skidmorecrucible with cover, steel outer crucible with lid, support triangle, holder,chimney stand and the gas burner.

SPARE PARTS


941653 - CARBON RESIDUE APPARATUS

27083 Meker gas burner (butane/propane)

941661 Skidmore crucible w ith bras s lid

941664 Steel outer cruc ible

941665 Metallic hollow ring

941666 Chimney w ith guide

15150 Porcelain Conradson cruc ible (pack of 12)

10702 Glass balls diam. 2mm (1 kg)

8 Kgw 250 mm

d 250 mmh 500 mm


17/81

See other applications under ASTM D 941 - D 1217 - D 1298 - D1480

SCOPEThis test method covers the determination by means of a glass hydrometer

of the API gravity of crude petroleum and petroleum products normally han-dled as liquids and having a Reid vapor pressure no greater than 26 psi.

OTHER STANDARDISO 3675

REF. 148546-unit ramp in stainless steel

ACCESSORIES (for all standards)

ACCESSORIES (ASTM D287)

ACCESSORY (ASTM D941)

ACCESSORY (ASTM D1217)

ACCESSORIES (ASTM D1298)

OPTIONAL

10013 Spare glassw are w ith cock

10741 Density cy linder 500 ml

15287 AFNOR thermometer, -1 5 to +45°C

15288 AFNOR thermometer, +35 to +85°C

20800 Hydrometer API 1H / -1 to 11

20801 Hydrometer API 2H / 9 to 21

20802 Hydrometer API 3H / 19 to 3120803 Hydrometer API 4H / 29 to 41







19386 Lipkin density bottle

19393 25 ml Bingham density bottle

20810 Hydrometer ( L50) / 0,600-0,650

20811 Hydrometer ( L50) / 0,650-0,700

20812 Hydrometer ( L50) / 0,700-0,750

20813 Hydrometer ( L50) / 0,750-0,800

20814 Hydrometer ( L50) / 0,800-0,850

20815 Hydrometer ( L50) / 0,850-0,900

20816 Hydrometer ( L50) / 0,900-0,950

20817 Hydrometer ( L50) / 0,950-1,000

20818 Hydrometer ( L50) / 1,000-1,050

20819 Hydrometer ( L50) / 1,050-1,10020820 Thermohydrometer A PI 51H / -1 to 1120821 Thermohydrometer API 52H / 9 to 21

20822 Thermohydrometer A PI 53H / 19 to 31

20823 Thermohydrometer A PI 54H / 29 to 4120824 Thermohydrometer A PI 55H / 39 to 51

20825 Thermohydrometer A PI 56H / 49 to 6120826 Thermohydrometer A PI 57H / 59 to 7120827 Thermohydrometer API 58H / 69to 8120828 Thermohydrometer A PI 59H / 79 to 9120829 Thermohydrometer A PI 60H / 89 to 101

941123 Water bath for hydrometer


14854 - 6 UNIT RAMP


20800 - API HYDROMETER 1H


941123 - WATER BATH

230 V4 A

50 Hz7.5 Kg

w 350 mmd 260 mmh 300 mm


18/81

SCOPE

This test method covers procedures for the determination of vapor pres-sure of gasoline, volatile crude oil, and other volatile petroleum products.

OTHER STANDARDS

IP 69 - NFM 07007 - ISO 3007 - EN 12

REF. 941432Electronic constant thermostatic bath, 3 vessels capacity, with thermom-

eter and digital display. Equipped with adjustable stirring device, low watercut-off, cooling coil for external cryostat and drain cock.

REID VESSELS WITH SCREW COUPLING

REID VESSELS WITH QUICK COUPLING

REID VAPOUR PRESSURE GAGES (psi and KPa)


SPARE PARTS


941432 - THERMOSTATIC BATH (3 place)


941411 - VESSEL WITH QUICK COUPLING


941401 - VESSEL WITH SCREW COUPLING

941401 RVP sc rew coupling test vess el (below 26 lb)

941405 RVP screw coupling test vess el (above 26 lb)

941411 RVP quick coupling test ves sel (below 26 lb)

941415 RVP quick coupling test ves sel (above 26 lb)

941420 Metallic manometer 0 to 5 psi/34 kPa






941410 Safety burst disk capsule (add on vessel price)

25755 Mercury manometer

9414283 Connection for mercury manometer

941402 Air chamber (screw )

941403 Gasoline chamber w ith one opening (scr ew )

941407 Gasoline chamber w ith tw o valves (s crew )

941427 Teflon gaskets for test vessel (2 packs of 12)

9414101 Spare disc f or safety c apsule


941413 Gasoline chamber w ith one opening (q. coupling)

941417 Gasoline chamber w ith tw o valves (q. coupling)

230 V16 A

50 Hz30 Kgw 470 mmd 470 mmh 860 mm

on request115V 60Hz

9417905 Pt 100 probe ( 250x5 mm)


19/81

SCOPEThis test method covers the determination of the existent gum content ofaviation fuels, and the gum content of motor gasolines or other volatile dis-

tillates in their finished form, and at the time of test.


REF. 941302This model, air jet only with 5 wells, includes electronic temperature controland flowmeter, thermometer 3C, beakers, conical outlets.

REF. 941303This model, air and steam jet with 5 wells, includes electronic temperature

control and flowmeter, steam superheater, thermometer 3C, beakers, conicaloutlets.

ACCESSORIES

SPARE PARTS

for aluminium block for calibration kit for superheater


941303 - AIR AND STEAM JET GUM BATH


941308 - STEAM GENERATOR


941302 - AIR JET GUM BATH


9413080 - AIR COMPRESSOR


941301 and 941304 - CALIBRATION KIT

941308 Steam generator (400V - 3 ph)

941301 A ir calibration kit f or 941302/941303

941304 Vapour calibration kit for 941303

9413080 Air compressor 2 stages 300 l (400V - 3 ph)

12875 Filter funnel 125 ml

941306 Conical air outlet

9413031 Superheater for 941303 apparatus


230 V16 A

50 Hz60 Kgw 770 mm

d 380 mmh 570 mm

230 V

16 A50 Hz

45 Kgw 770 mmd 380 mm

h 570 mm

400 V - 3ph20 A

50 Hz75 Kg

w 750 mmd 530 mmh 920 mm

400V - 3 ph7 A50 Hz

125 Kgw 760 mm

d 600 mmh 1670 mm

230 V0.3 A50 Hz5 Kg

w 680 mmd 340 mmh 180 mm

941307 Overpressure pump for steam generator

9417900 Pt 100 probe (30x6 mm)

9417904 Pt 100 probe (160x5 mm)

9417834 Pt 100 probe (60x3.15 mm)

9413023 Heating element for metallic bath


16138 Test cell


20/81

SCOPEThis test method specifies a procedure for the determination of the kin-ematic viscosity of liquid petroleum products, both transparent and opaque,

by measuring the time for a volume of liquid to flow under gravity through acalibrated glass capillary viscometer.

OTHER STANDARDSIP 71 - ISO 3104 - DIN 51366

REF. 60100Normalab Analis Fully Automatic Houillon viscometer - ModelNVH 450 -

- Plug and play equipment : no external connexion for use above ambient- 4 tubes in the same bath- Measuring range from 0.2 to 5000 cSt- Temperature range from 40 to 120°C (optional chiller can be connected)- Automatic tube cleaning

Our New automatic Houillon viscometer NVH 450 combines the advan-tages of a quick and economical standard method for viscosity measure-ment with the latest improvements in technology to reach comfort of use

and accuracy. 4 tests can be launched simultaneously and apart from sam-ple introduction, all the operations are driven by the internal CPU.

NVH 450 is delivered with cleaning system and pump included.Silicone oil, tubes and pipettes to be ordered separately

ACCESSORIES

VISCOSITY STANDARDS (see page 25)

SPARE PARTS


HOUILLON VISCOMETER TUBES

60100 - HOUILLON VISCOMETER NVH 450


TUBE NVH 450

230 V16 A50/60 Hz

75 Kgw 540 mmd 340 mm

h 760 mm


HOUILLON VISCOMETER NVH 450 - screen shot


60151 Houillon tube size 50 w ithout certif icate









60160 Houillon tube 45 cSt w ithout certif icate

24022 Glasstube for sampling and sample introduction24958 Sampling Micro pipet24960 Cone for pipet (pack of 1000)

27775 Demineralized w ater below 50°C (can of 20 l)

60101 Silicon oil (20 l)

60102 Vacuum pump PM 999960103 Burker SV 2 ways60104 Burker SV 3 ways60105 Gasket for cleaning clamp

60107 Waste bottle w ith cover and gasket

60108 Solvent bottle w ith cover and gasket60113 Safety w aste bottle with cover and gasket60114 Complete cleaning clamp


40386 Printer DPU 414 and cable

60135 Modified thermometer 120C for NVH 450

60136 Modified thermometer 121C for NVH 450


21/81

REF. 17915Constant temperature viscosity bath “ROUTINE” (max. 100°C) with glass

jar of 20 liters, thermometer for temperature reading and 5 places for com-

mon viscometers (support not included).

REF. 23829Constant temperature viscosity bath “ROUTINE” (max. 200°C) with glass

jar of 20 liters, digital temperature display and 5 places for commonviscometers (support not included).

REF. 941131Constant temperature viscosity bath “PRECISION” (max. 120°C) with glass

jar of 30 liters, electronic digital temperature control and 8 places turntableforcommon viscometers (support not included).

SPARE PARTS




REF.18450VISCOMETER WASHER supplied with 6 nozzle stoppers. This apparatusis allowed for external and internal washing of all current types of viscometer

tubes. The viscometer tubes are suspended in BIOSANE T215 solventvapors at 80°C.- Very fast cleaning for 6 viscometer tubes in 5 to 15 min- Negligible solvent consumption

SPARE PARTS

RECOMMENDED SOLVENT

23829 - VISCOSITY BATH (5 places)


941131 - VISCOSITY BATH (8 places)

10568 Suspension nylon f or Cannon

10569 Suspension nylon f or Ubbelohde

13539 Support for 6 viscometer tubes

16419 Silicone oil up to 150°C (5 l)

16427 Minera l oil max 100°C (5 l)

21375 Electronic stopw atch

941132 Heating element f or ref . 941131 (2000 W)

230 V10 A

50 Hz17 Kgw 320 mmd 580 mm

h 360 mm

230 V10 A50 Hz35 Kg

w 520 mmd 380 mmh 700 mm

9417904 Pt 100 probe ( 160x5 mm)

9411302 Borosilicate glass jar(300 x 450 mm)

10567 Suspension stainless steel for Ubbelohde



18450 - AUTOMATIC VISCOMETER WASHER ALV 110

230 V16 A50 Hz

30 Kgw 400 mm

d 400 mmh 1000 mm

21694 Heating controller

18455 Glass c leaning bath

18454 Injector stopper

18453 Heating element

25699 Biosane T215 solvent (5 l)

10025 ASTM thermometer 120C10026 ASTM thermometer 121C


22/81

1. Ubbelohde viscometer for transparent liquids

2. Cannon-fenske routine viscometer for transparent liquids

3. Cannon-fenske reverse flow viscometer for opaque liquids

4. BS / IP U RF viscometer for opaque liquids

ALL ABOVE VISCOMETERS CAN BE SUPPLIEDWITHOUT CERTIFICATE ON SPECIAL REQUEST

ASTM D 445 continued

VISCOMETER TUBES (all with calibration certificate)

2. Cannon-fenske

1. Ubbelohde

3. Cannon-fenske

4. BS / IP U RF

14030 0,3 to 1 cSt - size 0

14031 0,6 to 3 cSt - size 0C

14032 1 to 5 cSt - size 0B

14034 2 to 10 cSt - size 1

14035 6 to 30 cSt - size 1C

14036 10 to 50 cSt - size 1B

14037 20 to 100 cSt - size 2

14038 60 to 300 cSt - size 2C

14039 100 to 500 cSt - size 2B

14041 200 to 1000 cSt - size 3

14042 600 to 3000 cSt - size 3C

14043 1000 to 5000 cSt - size 3B

14044 2000 to 10000 cSt - size 4

14045 6000 to 30000 cSt - size 4C

13993 10000 to 50000 cSt - size 4B

13994 20000 to100000 cSt - size 5

14002 0,4 to 2 cSt - size 25

14003 0,8 to 4 cSt - size 50

14004 1,6 to 8 cSt - size 75

14005 3 to 15 cSt - size 10014006 7 to 35 cSt - size 150

14007 20 to 100 cSt - size 200

14008 50 to 200 cSt - size 300

14009 100 to 500 cSt - size 350

14010 240 to 1200 cSt - size 400

14011 500 to 2500 cSt - size 450

14012 1600 to 8000 cSt - size 500

14013 4000 to 20000cSt - size 600

14014 10000 à 40000 cSt - size 650

14015 20000 à 80000 cSt - size 700

14016 0,4 to 2 cSt - size 25

14017 0,8 to 4 cSt - size 50

14018 1,6 to 8 cSt - size 75

14019 3 to 15 cSt - size 100

14020 7 to 35 cSt - size 150

14021 20 to 100 cSt - size 200

14022 50 to 200 cSt - size 300

14023 100 to 500 cSt - size 350

14024 240 to 1200 cSt - size 400

14025 500 to 2500 cSt - size 450

14026 1600 to 8000 cSt - size 500

14027 4000 to 20000cSt - size 600

14028 10000 à 40000 cSt - size 650

14029 20000 à 80000 cSt - size 700

18670 0.6 to 3 cSt - size 1

18671 2 to 10 cSt - size 2

18672 6 to 30 cSt - size 318673 20 to 100 cSt - size 4

18674 60 to 300 cSt - size 5

18675 200 to 1000 cSt - size 6

18676 600 to 3000 cSt - size 7

18677 2000 to 10000 cSt - size 8

18678 6000 to 30000 cSt - size 9

18679 20000 to 100000 cSt - size 10

18680 60000 to 300000 cSt - size 11


23/81

5. Houillon viscometer for transparent liquids

6. BS / IP SL viscometer for transparent liquids

7. S.I.L. viscometer for transparent liquids

8. BAUME VIGNERON viscometer for transparent liquids

9. CANNON MANNING VACUUM viscometer for bitumen

ALL ABOVE VISCOMETERS CAN BE SUPPLIEDWITHOUT CERTIFICATE ON SPECIAL REQUEST

VISCOMETER TUBES (all with calibration certificate)

8. BAUME VIGNERON

9. CANNON MANNING VACUUM

7. S.I.L.

6. BS / IP SL

5. Houillon

13932 3.2 cSt

13933 6.4 cSt

13934 12 cSt

13935 28 cSt

13936 80 cSt

13937 200 cSt

13938 400 cSt

13939 960 cSt

13940 2000 cSt

19283 10 cSt

19284 30 cSt

19285 100 cSt

19286 300 cSt

19287 1000 cSt

19288 3000 cSt

19289 10000 cSt

19290 30000 cSt

19291 100000 cSt

19631 3 cSt

19632 10 cSt

19497 30 cSt

19498 100 cSt

19499 300 cSt

19500 1000 cSt

19501 3000 cSt

19502 10000 cSt

14740 0.63 cSt

14741 1 cSt

14742 1,6 cSt

14743 2.5 cSt

14744 4 cSt

14745 6.3 cSt

14746 10 cSt

14747 15 cSt

14748 25 cSt

14749 40 cSt

14750 63 cSt

14751 100 cSt

14752 160 cSt

14753 250 cSt

14754 400 cSt

14755 630 cSt

14756 1000 cSt

14757 1600 cSt

14758 2500 cSt

14759 4000 cSt14760 6300 cSt

18892 0.8 cSt

18893 2.4 cSt

18894 8 cSt

18895 24 cSt

18896 80 cSt

18897 240 cSt

18898 800 cSt

18899 2400 cSt

18900 8000 cSt

18901 24000 cSt

18902 80000 cSt


24/81

10. CANNON UBBELOHDE viscometer for transparent liquidswithout connection to washer

11. CANNON UBBELOHDE viscometer for transparent liquidswith connection to washer

ALL ABOVE VISCOMETERS CAN BE SUPPLIED

WITHOUT CERTIFICATE ON SPECIAL REQUEST

VISCOMETER TUBES FOR AUTOMATIC VISCOMETER

10. CANNON UBBELOHDE

11. CANNON UBBELOHDE

15253 0.003 (approx. constant)






15263 1 (approx. cons tant)

15264 3 (approx. cons tant)

15266 10 (approx. constant)







22888 1 (approx. c onstant)

22889 3 (approx. c onstant)

22890 10 (approx. constant)


25/81

VISCOSITY STANDARDS (1 pint)


26/81

SCOPE

This test method covers the determination of sediment in crude oils andfuels oils by extraction with toluene.

OTHER STANDARDS

IP 53 - NFM 07010 - ISO 3735 - DIN 51789

REF. 941281Extraction apparatus consisting of erlenmeyer extraction flask, 1000ml ca-

pacity, block-tin coil condenser, water cup and extraction thimble suspendedby means of a corrosion resistant wire.

ACCESSORY

SPARE PARTS


941281 - EXTRACTION APPARATUS

10739 Water cup w ith glass hook19012 Extraction flask ( 1 litre)

941282 Condenser

10763 Extract ion thimble (a lundum)


941284 Extract ion basket

28754 Hot plate SB 160


27/81


SCOPEThis test method covers the determination of ash in the range 0.001-0.180

mass %, from distillate and residual fuels, gas turbine fuels, crude oils, lu-bricating oils, waxes, and other petroleum products, in which any ash-form-ing materials present are normally considered to be undesirable impurities

or contaminants.

OTHER STANDARDIP 4

SCOPEThis test method covers the determination of the amount of carbon residueleft after evaporation and pyrolysis of an oil, and is intended to provide

some indication of relative coke-forming propensity.


REF. 941671This model with 5 wells and control bulb does not include test accessories.


SPARE PARTS


941671 - RAMSBOTTOM CARBON TESTER

REF. 23963Muffle furnace model L3/11, 3 liters capacity, maximum temperatureof 1100 °C.

NECESSARY ACCESSORIES (for D482)

NECESSARY ACCESSORIES (for D874)

SPARE PARTS

9419675 10 ml syringe w ith needie

941673 Filling device for glass coking bulb

19365 Glass c oking bulb

9419675 10 ml sy ringe w ith needie

941674 Control bulb w ith thermocouple

230 V16 A50 Hz75 Kg

w 425 mm

d 425 mmh 505 mm


9411300 Platinum cruc ible (100 ml)

10532 Porcelain dish,100 ml,flat bottom (pack of 6 )

10687 Stainless curved crucible tong (pack of 2)


10770 Porcelain plate for below dess icator

27203 Soda lime glass dessicator diam. 200 mm

10508 Porcelain cruc ible, 40 ml tall form (pac k of 6 )

10509 Porcelain cruc ible, 80 ml tall form (pac k of 6 )

10510 Porcelain crucible,120 ml tall form (pack of 6 )

10515 Porcelain crucible, 80 ml low for m (pack of 6 )

10532 Porcelain dish,100 ml,flat bottom (pack of 6 )

10687 Stainless curved crucible tong (pack of 2)


10770 Porcelain plate for below dess icator

27203 Soda lime glass dessicator diam. 200 mm

15377 Silica crucible (50 ml tall form)

15386 Silica c rucible (75 ml low for m)

15387 Silica c rucible (130 ml low for m)

15671 Platinum cruc ible (50 ml)

23964 Set of heating elements

23965 Thermocouple K (160mm)


23963 - MUFFLE FURNACE

230 V6 A

50 Hz20 Kgw 380 mmd 370 mmh 420 mm

941675 Thermocouple assembly (furnace + safety)


28/81

See other applications under ASTM D 873

SCOPE

This test method covers the determination of the stability of gasoline infinished form only, under accelerated oxidation conditions.

OTHER STANDARDS

IP 40 - NFM 07012 - ISO 7536 - DIN 51780

AUTOMATIC EQUIPMENT MODELS NPI 440 and 442

REF. 40925 (for D525 and D873)4-unit automatic Potential gums & Induction period tester, model NPI 442,including metallic bath, direct pressure measurement in the test vessel,over-pressure safety by certified bursting disk and quick coupling, trackingof pressure, pressure drop and break-point on printer or PC, supplied withplotter but without filling accessory, test vessels, sample container, nor PC

software.

REF. 40900 (for D525, D873)2-unit automatic Potential gums & Induction period tester, model NPI 440,includingliquid bath, direct pressure measurement in the test vessel,over-pressure safety by certified bursting disk and quick coupling, tracking of

pressure, pressure drop and break-point on printer or PC, supplied withplotter but without filling accessory, test vessels, sample container, nor PC

software.

REF. 40930The oxygen filling and decompression valve adapter model NPC 210 isdesigned for all type of potential gums and induction period test vessels.The kit provides the operator with a high level of safety.

NECESSARY ACCESSORIES (for D525 and D873)

SPARE PARTS

MANUAL EQUIPMENT

REF. 9413724-place water bath with glass condenser and digital temperature control.


SPARE PARTS


40900 - LIQUID BATH NPI 440 (2 places)


40930 - OXYGEN FILLING CHAMBER NPC 210

409031 Stainless s teel ves sel w ith burst disk40909 Filling and decompression (manual)

40911 Stand for 2 vessels

40933 Gaskets v iton for cylinder ( pack of 10)

21688 Glass tes t container w ithout cover

513514 Cover for container

941362 Recording pressure gauge (1 f or 2 v essels)

941365 Charts f or recording gauge (pack of 100)

21688 Glass test container w ithout cover

513514 Cover for container


230 V10 A

50 Hz40 Kgw 570 mmd 630 mmh 640 mm

on request115V 60Hz

30 Kgw 500 mmd 365 mm

h 800 mm

9417902 Pt 100 probe (60x5 mm)


941372 - LIQUID BATH (4 place)

230 V

16 A50 Hz60 Kgw 720 mmd 400 mm

h 650 mm

19007 Glass condenser


9413621 Red Pen for recorder (pack of 5)

9413622 Green Pen for recorder (pack of 5)

409031 Stainless s teel ves sel w ith burst disk

40909 Filling and decompres sion (manual)



40933 Gaskets viton for cylinder (pack of 10)

40913 Pt 100 probe for liquid bath40916 Heating element f or liquid bath (1800 W)

40934 Pt 100 probe for dry bath

40935 Heating cartridge for dry bath (4 x 200 W)

40919 Solid s tate relay for heating element


40925 - METALLIC BATH NPI 442 (4 places)

230 V10 A50 Hz40 Kg


513513 Glass tes t container w ith c over

513513 Glass tes t container w ith c over


29/81

SCOPEThis test method covers the determination of the aniline point of petroleumproducts and hydrocarbon solvents.


REF. 41100Automatic Aniline Point Tester model NPA 410. Detection of clear to darksample by infrared detection.NO HANDLING OF ANILINE.

ACCESSORIES


SPARE PARTS

REF. 40500Auto aniline point tester model, NAE 440 equipped with 2 independantstations, heating system by metallic bath (+10/+150 °C), printer, automaticdetection of clear, colored and dark samples.


SPARE PARTS


41100 - ANILINE POINT NPA 410


40500 - ANILINE POINT NAE 440

41104 2 ml vials to c rimp (pack of 1000)

41105 Crimp seal (pack of 500)

41106 Hand crimper

41109 Thermocouple41117 Set of 2 fuses (2A)

230 V1.5 A50 Hz9 Kgw 280 mm


230 V1.5 A

50 Hz30 Kgw 520 mm

d 490 mmh 540 mm

on request115V 60Hz


SCOPEThis test method covers the determination of the dropping point of lubricat-ing grease.

OTHER STANDARDS

IP 132 - NFT 60102 - ISO 2176


41121 Heating cartridge 100W

41121 Heating cartridge 100W


30/81


SCOPE

NABLEND series of automatic blending units have been designed to auto-mate the blending procedure for reference and check fuels used for octaneand cetane number measurement.

Due to the flexibility of the software the instrument can be used for otherhydrocarbon blending purposes too where the accuracy and the speed of

the blending procedure are critical.The units are operable locally from the embendded Windows CE basedtouch screen computer or can be remote controlled from any PC having aninternet browser installed over the local area network.The intranet technology software allows complete remote management and

service over the internet or phone line.The blending and calibration data being stored in an internal database, canbe accessed over the local area network.

REF. 52000Model NABLEND 8875 automatic stand alone unit with 2 fluid channels, forblending cetane reference fuels according ASTM D613 composed of two

blending components: nCetane, AMN or HMN, or U and T components.

REF. 52100Model NABLEND 8873 automatic stand alone unit with 3 fluid channels, forblending octane reference and check fuels according ASTM D2699 andASTM D2700 composed of three blending components: iso-octane, nor-mal heptane and toluene.

REF. 52200Model NABLEND 8877 automatic stand alone unit with 5 fluid channels, forblending octane and cetane reference and check fuels according ASTM

D613, ASTM D2699 and ASTM D2700 composed of three blending com-ponents: iso-octane, normal heptane and toluene for octane and two blend-ing components: nCetane, AMN or HMN, or U and T components for cetane.

REF. 52300

Model NABLEND 8879 automatic stand alone unit with 6 fluid channels, forblending octane and cetane reference and check fuels according ASTMD613, ASTM D2699 and ASTM D2700 composed of four blending compo-

nents: iso-octane, normal heptane, 80/20 blend and toluene for octane andtwo blending components: nCetane, AMN or HMN, or U and T componentsfor cetane.

OPTIONAL ACCESSORY

MAIN CONSUMABLE

SPARE PARTS


52000 - AUTOMATIC BLENDING UNIT

90-264 V0.8 A47-440 Hz270 Kg

w 610 mmd 820 mmh 1650 mm

52001 Bottle, solvent res istant w ith c ock (1l)

52002 Dosing pump

53000 Explosion-proof drum pump

52003 Printer paper (roll)

52004 Fuel filter

52005 Solenoid valve

52006 Injection head O-ring


31/81

SCOPEThis test method covers procedures for the determination of acidic con-

stituents in petroleum products and lubricants soluble or nearly soluble inmixture of toluene and propan-2-ol.

OTHER STANDARDSIP 177 - ISO 6619

REF. 941708Neutralisation number apparatus by potentiometric titration, single unit, com-

plete with pH test kit.

SPARE PARTS


941708 - ACID NUMBER TESTER

941709 PH test kit

9417082 Glass electrode (Beck. 39321)

9417083 Calomel electrode (Beck. 39420)

19027 Burette (10ml in 0,05 ml)

12438 250 ml beaker

230 V

0.3 A50 Hz5 Kgw 500 mmd 340 mm

h 770 mm

SCOPEThis test method is used to evaluate the ability of inhibited mineral oils,particularly steam-turbine oils, to aid in preventing the rusting of ferrousparts should water become mixed with the oil. This test method is also

used for testing other oils, such as hydraulic oils and circulating oils.


REF. 9416306This improved 6 places unit with digital tachometer includes beakers, cov-ers, stainless steel stirrers, test rods with plastic holders and 9C thermom-

eters. Polishing machine is not included.

ACCESSORY

SPARE PARTS


9416306 - RUST TESTER

941636 Polishing apparatus w ith electric motor

941631 400 ml beaker

941632 Transparent plastic cover941633 Stainless steel stirrer

9416341 Test specimen

9416342 Plastic holder


230 V16 A50 Hz25 Kg

w 770 mmd 250 mm


9417904 Pt 100 probe ( 160x5 mm)



941636 - POLISHING MACHINE

230 V

2.5 A50 Hz5 Kgw 320 mm

d 320 mmh 200 mm


32/81


SCOPEThis test method covers the determination of chlorine in lubricating oils andgreases containing additives, and in additive concentrates.


SCOPEThis test method covers the determination of oil in petroleum waxes havinga congealing point of 30°C or higher as determined in accordance with test

method D 938, and containing not more than 15% of oil.


REF. 941795Complete apparatus delivered with cooling bath, 3 filter stick, air pressureregulator, evaporation assembly, 4 weighing bottles and thermometer.

SPARE PARTS

941795 - OIL CONTENT TESTER


23240 Weighing bottle (15 ml)

517565 Filter stick B24

517564 Cooling sample tube

230 V0.3 A50 Hz15 Kgw 600 mm

d 300 mmh 450 mm9417902 Pt 100 probe (60x5 mm)


33/81


SCOPEThis test method covers the distillation of industrial aromatic hydrocarbons


SCOPEThis test method covers the determination of the tendency of aviation recip-

rocating, turbine, and jet engine fuels to form gum and deposits under ac-celerated aging conditions.

OTHER STANDARDSIP 138 - NFM 07013 - DIN 51799


SCOPEThis test method covers the determination of the sulfated ash from unusedlubricating oils containing additives and from additives concentrates used in

compounding.


SCOPEThis test method covers a referee and a routine procedure for determiningthe dielectric breakdown voltage of insulating liquids.

OTHER STANDARDSIP 295 - NFC 27221

REF. 23797Complete Tester, model OTS60AF/2, for Dielectric Breakdown Voltage,delivered with oil test vessel fitted with spherical electrodes and oil test setpreparation kit comprising stirrers, mushroom and cylindrical electrodes,electrode spacing gauge and protective cover.

REF. 27196Portable tester, model OTS60PB, for routine analysis, delivered with 4 oil

vessels, 1 pair of spherical, mushroom and cylindrical electrodes, spacinggauge and protective carrying case.

SPARE PARTS

23798 Test container + electrodes f or D877

23799 Test container + electrodes f or NFC 27221 picture not mandatory

27196 - PORTABLE MEGGER

12 V rechargeable

19 Kgw 259 mmd 247 mmh 373 mm


34/81

SCOPE

This test method covers the determination of the foaming characteristics oflubricating oils at 24°C and 93.5°C.

OTHER STANDARDS

IP 146 - NFT 60129 - ISO 6247

REF. 941643Twin test units for both 24 and 93.5 °C. Delivered complete with certified

diffuser stone,glassware, flowmeters and thermometers.

REF. 941640Single test unit for both 24 and 93.5 °C. Delivered complete with certifieddiffuser stone,glassware, flowmeters and thermometers.

REF. 9416431Automatic time sequencer to monitor soaking, blowing and settling periodsfor 4 samples. It helps the operator to limit his presence nearby the instru-ment using audible and visual alarm.

ACCESSORIES

SPARE PARTS


941643 - FOAMING TEST BATH


9416431 - AUTOMATIC SEQUENCER


99644 - WET TEST GAS METER24795 Diff user s tone calibrated (w ith certificate)

941644 Wet Test Gas Meter (type 00)

9416412 Graduated cylinder (1000 ml) w ith ballast

9416433 Air compressor

9411302 Borosilicate glass jar(300 x 450 mm)

19371 Graduated cy linder (1000 ml)


230 V16 A50 Hz36 Kg

w 680 mmd 340 mmh 770 mm

230 V2 A

50 Hz5 Kgw 250 mmd 320 mmh 150 mm

5 Kgw 260 mmd 260 mmh 460 mm

9417904 Pt 100 probe ( 160x5 mm)


24803 Stainless steel diffuser

23203 Cryos tat TLC 30 - 5 liters (- 30/+60°C ±.1)

REF. 9416432Twin test unit for sequence 1, 2, 3 at 24 and 93.5 °C and sequence 4at150°C. Ready to use and delivered with two test cylinders, calibrated

flowmeters and stainless steel diffusers.


SPARE PARTS


9416432 - FOAMING TESTER (150 °C)

9416434 Oil polyalphaolefin for bath (can of 25 l)

19371 Graduated cy linder (1000 ml)

230 V10 A50 Hz

32 Kgw 350 mmd 350 mmh 760 mm

9417905 Pt 100 probe ( 250x5 mm)

9416431 Automatic time sequencer

24803 Stainless s teel diff user


and and


35/81


SCOPEThis practice covers the laboratory determination, using a glass hydrom-eter, of the density, relative density, or API gravity of crude petroleum, pe-troleum products, or mixtures of petroleum and non petroleum products

normally handled as liquids, and having a Reid vapor pressure of 26 lb orless.

OTHER STANDARDSIP 160 - ISO 3675


SCOPEThis test method covers measuring with a penetrometer the penetration of

petrolatum as an empirical measure of consistency.

OTHER STANDARDS

IP 179 - NFT 60119 - DIN 51579

SCOPEThis test method determines resistance of lubricating greases to oxidationwhen stored statically in an oxygen atmosphere in a sealed system at anelevated temperature under conditions of test.

OTHER STANDARD

IP 142

REF. 941769Constant temperature oil bath, double walled,for 2 Norma-Hoffman Testvessels

REF. 941770Constant temperature oil bath, double walled,for 4 Norma-Hoffman Testvessels


SPARE PARTS


941770 - OIL BATH (4 places)

941766 Pressure gauge (0-160 psi)

941767 Recording pressur e gauge (2-pen) w ith tubings

941370 Flexible polyethy lene tubing w ith quick c oupling

941761 Complete oxidation ves sel

941762 Holder f or 5 dishes

517215 Glass dish (pack of 10)

941764 Spare burst disc

941765 Access ory for closing vessel

9417611 Complete oxidation ves sel w ith burst disc


941762 Holder f or 5 dishes

517215 Glass dish (pack of 10)


9417641 Lead gasket for oxidation vessel

230 V10 A50 Hz45 Kg

w 600 mmd 400 mmh 450 mm

9417905 Pt 100 probe ( 250x5 mm)9417709 Heating element (1000 W)

941365 Charts f or recording gauge (pack of 100)

9413621 Red Pen for recorder (pack of 5)

9413622 Green Pen for recorder (pack of 5)


36/81

See other application under ASTM D 2274 - D 2893 - D 4310

SCOPEThis test method was developed for, and is used to evaluate the oxidation

stability of inhibited steam-turbine oils in the presence of oxygen, water, andcopper and iron metals at an elevated temperature.


REF. 9416260 Oxidation Test apparatus, 8 units, with digital temperature display, opaque

magnetic screen, one bath thermometer.This apparatus is delivered whithout flowmeter.

STANDARD KITS AT CHOICE (REQUIRED)KIT FOR ASTM D 943 - 8 test positions

KIT FOR ASTM D 2274 & D 4310 - 8 test positions

KIT FOR ASTM D 2893 - 8 test positions


SPARE PARTS - GLASSWARE

SPARE PARTS - BATH

Apparatus for Filterable Insolubles (ASTM D2274 & D4310)


9416260 - OXIDATION TESTER

21696 Oxidation cell D943/D2893 (8 cells requested)

21011 Catalys t iron-copper c oil (ready to use)

516597 Reel of copper w ire catalyst (20 kg)

516596 Reel of iron w ire catalyst (1 kg)

941628 Winding fixture f or w ire catalyst

9416232 Syringe w ith sampling tube

9416231 Thermometer bracket

9416233 Sampling tube holder

19348 Mushroom condenser (D943)

19349 Oxygen delivery tube

9416251 Flow meter for 3 l/h air (D943)

9416252 Flow meter for 3 l/h oxy gen (D2274 / D4310)

9416253 Flow meter for 10 l/h air (D2893)


230 V16 A50 Hz40 Kgw 610 mm

d 450 mmh 1100 mm

9417905 Pt 100 probe ( 250x5 mm)


19347 Test c ontainer

21697 Oxidation cell D 2274/D 4310 (8 cells requested)

19351 Mushroom condenser (D2274 / D4310)

27530 Filter 0.8 µm/diam. 47mm (D4310)28695 Vacuum pump 34 l/min. (D4310)

30293 Filter assembly (D4310)

21696 Oxidation cell D943/D2893 (8 cells requested)


37/81


SCOPEThis test method specifies a procedure for the laboratory distillation of or-ganic liquids boiling between 30 and 300 °C which are chemically stable

during the distillation process.

OTHER STANDARDIP 195

SCOPEThis test method covers the determination of the loss in mass by evapora-

tion of lubricating greases and oils for applications where evaporation lossis a factor.

REF. 941771

Evaporation cell with grease sample cup, equipped with flowmeter andneedle control valve.

REF. 941772Evaporation cell with oil sample cup, equipped with flowmeter and needlecontrol valve.

OPTIONAL

SPARE PARTS

9417741 Grease sample cup

9417742 Oil sample cup



941773 Oil bath f or eva poration cell


38/81


39/81


SCOPEThis test method covers the measurement of the density of pure hydrocar-bons or petroleum distillates boiling between 90 and 110°C that can behandled in a normal fashion as a liquid at the specified test temperatures of

20 and 25°C.

SCOPEThis test method covers the evaluation of the leakage tendencies of wheel

bearing greases when tested under prescribed laboratory conditions.



9411520 - FREEZING POINT APPARATUS

SCOPE

This test method covers the determination of the freezing point of engineantifreeze products.

OTHER STANDARD

NFT 78102

REF. 9411520Freezing point apparatus of engine antifreeze solutions complete with

thermometers.

SPARE PARTS

23239 Dew ar f reezing tube (200 ml)

9411522 Dew ar cooling bath

15351 ASTM thermometer 75F

15352 ASTM thermometer 76F

230 V0.3 A50 Hz6 Kgw 200 mm

d 300 mmh 600 mm


40/81

SCOPEThis practice covers the procedures for obtaining representative samplesof liquefied petroleum gases such as propane, butane, or mixture thereof,

in containers other than those used in laboratory testing apparatus.

OTHER STANDARDSNFM 41101 - ISO 4257 - DIN 51610

REF. 9414541Whitey stainless steel sampling vessel (1gallon) complete assembly.

REF. 9412251

Whitey stainless steel sampling vessel (2250cc) complete assembly.

REF. 9411001Whitey stainless steel sampling vessel (1000cc) complete assembly.

REF. 941501Whitey stainless steel sampling vessel (500 cc) complete assembly.

SPARE PARTS


SAMPLING OF LPG

SCOPE

This test method covers the evaluation of the resistance of a lubricatinggrease to washout by water from a bearing, when tested at 38 and 79°Cunder the prescribed laboratory conditions.


941031 Valve D w ith tube 031 for ref. 9411001

941034 Valve D w ith tube 034 for ref. 941501

941046 Valve D w ith tube 046 for ref. 9412251941068 Valve D w ith tube 068 for ref. 9414541

941400 Quick coupling (QQ-QF4-B-400)

941440 Flexible tubing 1m (SS-TH4TA4PF4-40)

941464 Inlet valve C for ves sel (SS-16DKM4-F4)

9411613 Quick coupling male (SS-QF4-S-4PM)

9411819 Connection M/F TE (SS-4-ST)

9412213 Valve (SS-1 V M4)

9414546 Stainless s teel sampling vessel (1gallon)9412250 Stainless s teel sampling ves sel (2250 cc )

9411000 Stainless s teel sampling ves sel (1000 cc )9411000 Stainless s teel sampling ves sel (1000 cc )9411000 Stainless s teel sampling ves sel (1000 cc )

941500 Stainless s teel sampling ves sel (500 cc )


41/81

See other applications under ASTM D 2784

SCOPEThis test method covers the determination of total sulfur in liquid petroleumproducts in concentrations from 0.01 to 0.4 mass %.

OTHER STANDARDS

IP 107 - NFM07031- ISO 2192 - DIN 51771

REF. 941454Sulfur determination apparatus in liquid petroleum products, complete6-unit assembly, by burning in a controlled atmosphere, suitable ManifoldSystem consisting of a vacuum manifold with regulating device and a dualmanifold supplying gas mixture of approx. 70% carbon dioxide (C0

2) and

30% oxygen (O2) at regulated pressures.

SPARE PARTS


941454 - SULFUR TESTER (lamp method)

19334 25 ml flask (non aromatic produc ts)

19332 Burner f or non-aromatic samples

19331 Chimney

19330 Absorber

19333 Spray trap

19013 Scrubber

19014 Regulator tube

9414568 Pressure or vac uum trap

9414570 Level flask

19336 25 ml flask (aromatic produc ts)

19335 Burner for aromatic samples

56 Kgw 1150 mm

d 600 mmh 800 mm

9414560 Ball of 2 oz cotton w icks, 4 s trands


42/81

SCOPE

This test method covers the determination of the gage vapor pressures ofliquefied petroleum gas products at temperatures of 37.8°C up to 70°C.

OTHER STANDARDS

IP 161 - NFM 41010 - ISO 4256 - DIN 51616

REF. 941432Electronic constant thermostatic bath, 3 vessels capacity, with thermom-

eter and digital display. Equipped with adjustable stirring device, low watercut-off, cooling coil for external cryostat and drain cock.

LPG TEST VESSEL (for D1267)

LPG TEST VESSEL (for IP 161)

OPTIONAL ACCESSORY

VAPOR PRESSURE GAUGES (psi and kPa)

SPARE PARTS


941921 - LPG TEST VESSEL


SCOPEThis practice covers the laboratory determination, using a glass hydrom-eter, of the density, relative density, or API gravity of crude petroleum, pe-troleum products, or mixtures of petroleum and nonpetroleum products

normally handled as liquids, and having a Reid vapor pressure of 26 lb orless.


941921 LPG test vessel

9419221 Test vessel up to 300 psi (20% capacity)

9419222 Test vessel above 300 psi (20% capacity)

9419231 Test vessel up to 300 psi (33% capacity)

9419232 Test vessel above 300 psi (33% capacity)

941920 Safety burst disk capsule (add on vessel price)




9419201 Spare burst disc

9419211 Air chamber w ith valve f or 941921

9419212 Gas chamber w ith 2 valves f or 941921

9419213 Gasket for LPG vessel D1267 (pack of 24)

9419237 Seal "O" ring for IP161 test ves sel





230 V

16 A50 Hz30 Kgw 470 mmd 470 mm


9417905 Pt 100 probe ( 250x5 mm)


43/81

SCOPEThis test method is for determining hydrocarbon types over the concentra-tion ranges from 5 to 99 volume % aromatics, 0.3 to 55 volume % olefins,

and 1 to 95 volume % saturates in petroleum fractions that distill below315°C.


REF. 941600New designed adsorption apparatus assembly, 4 test, with pressure gauges,

needles valves, UV lighting, vibrator and basic glassware whithout column.


SPARE PARTS


941600 - ADSORPTION APPARATUS


SCOPEThis test method covers the empirical estimation of the consistency of waxesderived from petroleum by measurement of the extent of penetration of astandard needle.

OTHER STANDARDSNFT 60123 - ISO 3992 - DIN 51579

19761 Silica gel 100 to 200 mesh (2 kg)

76239 Certified silica gel w ith colored indicator (40 gr)

19585 Hypodermic syringe 1ml

9415068 Hypoder mic c leaning tube (2 m)

9415057 Tube UV (40 W)

21700 Standard adsor ption column (upper part)

19022 Spherical connector f or air input (S28/12)

19023 Standard w all tubing (low er part)

19582 Outlet f or true bore column (S12/2)

11089 Clamp for low er joint

11091 Clamp for upper joint

230 V1 A50 Hz

35 Kgw 700 mm

d 160 mmh 1900 mm

9415059 Electrical vibrator

19586 Hypodermic needle 102 mm (set of 5)

19325 True Bore a dsorption column


44/81

SCOPE

This test method covers measurement of the ability of petroleum oils orsynthetic fluids to separate from water.

OTHER STANDARDS

NFT 60125 - ISO 6614

REF. 941550Automated Demulsibility Tester, CE tested and approved, controlled byexclusive software with image processing, with a highest degree ofrepeatability and reproducibility because layers detections are no longerevaluated by the human eyes but by using a CCD-Camera which takespictures of every sample tube during testing

SPARE PARTS

REF. 941545Semi-automatic demulsibility tester microprocessored controlled , th reetest unit, electronic temperature control between 20 and 95°C ± 0.1°C,

stirring speed and time control with digital parameters display, moving steelshaft with stirring motor, paddle and inside illumination.

SPARE PARTS


941550 - AUTO DEMULSIBILITY TESTER


941545 - DEMULSIBILITY TESTER

SCOPE

This test method covers a procedure for determination of the smoke pointof kerosine and aviation turbine fuel.

OTHER STANDARDS

IP 57 - NFM 07028 - ISO 3014 - DIN 51406

REF. 941680Smoke point apparatus, complete, delivered with one interchangeable oil

container

SPARE PARTS


941680 - SMOKE POINT APPARATUS

9416801 Candle (oil container)

9416802 Wick (pack of 12)

9415450 Stirring paddle

11470 Glass graduated cy linder (100 ml)


941551 Translucent plate for bath bot tom

4 Kgw 200 mm

d 200 mmh 400 mm

230 V16 A50 Hz

50 Kgw 560 mmd 655 mmh 1135 mmon request

115V 60Hz

230 V10 A50 Hz43 Kg


9417901 Pt 100 probe ( 150x6 mm)

11470 Glass graduated cy linder (100 ml)

9415450 Stirring paddle

9417904 Pt 100 probe (160x5 mm)




45/81


SCOPE

This test method describes two procedures for the measurement of thedensity of materials which are fluid at the desired test temperature.

SCOPEThis test method covers the determination of the extent to which a grease

retards the rotation of a slow-speed ball bearing by measuring starting andrunning torques at low temperatures (below -20°C).



SCOPEThis test method covers two procedures for measuring the consistency of

small samples of lubricating greases by penetration of a ¼ or ½ scale cone.



46/81

SCOPEThis test method covers three procedures for the determination of totalsulfur in petroleum products including lubricating oils containing additives,

and in additive concentrates.

OTHER STANDARDNFM 07025

REF. 941450Equipment including electric tube furnace with microprocessored digitalsetting and reading, gas washing bottles, calibrated flowmeter, porcelain

combustion tube, combustion boats, boat pusher, bent tube, absorber,burettes with support and clamps.

SPARE PARTS


941450 - HIGH TEMPERATURE SULFUR TESTER

9414012 Boat pusher

9414024 Combustion boat (alundum)

9414062 Combustion tube

9414501 Heating element f or f urnace

9414003 Oxygen drying train (3 f lask)

941472 Burette (25 ml in 0.1ml)

19015 Right angle connector w ith s tandard joint

19330 Absorber

230 V16 A50 Hz17 Kgw 1200 mm

d 450 mmh 800 mm

SCOPEThis test method covers the visual determination of the color of a widevariety of petroleum products such as lubricating oils, heating oils, dieselfuel oils, and petroleum waxes.


REF. 24415Manual colorimeter model AF650 with a 16 filters colorimetric scale from0.5 to 8.0 units. It is a 3-field instrument for visually determining the ASTMcolour of samples by direct comparison with coloured glass standards. Theinstrument is delivered with 3 glass sample jars and a calibration certificate

for the filters.

SPARE PARTS

AUTOMATIC APPARATUS

REF. 29056 ON REQUESTThe Lovibond PFX 190 is an easy to use, automatic instrument requiringno special skills to operate. It is supplied complete with Windows

software, accessories and spares, optical glass cells for the colour scalesincluded. Additional scales can be added to standard instruments onrequest.

REF. 29006 ON REQUESTThe Lovibond PFX 880/P is an easy to use, automatic instrument, which

eliminates time-consuming procedures of visual methods. It is aspectrophotometer for objective colour analysis of petroleum fuels, oils,waxes and petrochemicals according to the Saybolt and ASTM Colourscales


24415 - COLORIMETER AF650

115/230 V0.3 A50 Hz

5.5 Kgw 255 mmd 250 mmh 170 mm

19353 Glass s ample tube

22279 Halogen lamp 12V / 20W


47/81

SCOPEThis test method covers the determination of the relative density or densityof light hydrocarbons including liquefied petroleum gases (LPG).

OTHER STANDARDS

IP 235 - NFM 41008 - ISO 3993

REF. 941911Complete apparatus, mounted on a heavy base and suitable for immersionin a constant temperature water bath.

REF. 9419110Complete apparatus with burst disk, mounted on a heavy base and suitablefor immersion in a constant temperature water bath.


OPTIONAL ACCESSORY

SPARE PARTS

SCOPEThis test method covers the determination of the relative density or density

of light hydrocarbons including liquefied petroleum gases (LPG).

REF. 272351 -Place Engler viscometer without accessorieselectric heatingdigital display of temperature

temperature from room up to + 99,9°Cpolished brass test cup with stainless steel efflux tubewaterbath motor stirrer 2800 rpmsafety thermostatecooling coil



941911 - TEST VESSEL

941432 Constant temperature w ater bath (3 test)

9419121 Thermo-hydrometer ( 0.500 to 0.650 in °F)

23448 Thermodensimeter (0.500 à 0. 550 - 30°C)

23449 Thermodensimeter (0 .550 à 0.600 - 30°C)

9419132 Lucite transparent c ylinder

9419133 Neoprene gasket

9419124 Thermometer ISO 653





230 V

16 A50 Hz30 Kgw 470 mmd 470 mm


9417905 Pt 100 probe (250x5 mm)

23204 Cryos tat TLC 40 - 11 liters ( -45/ +20°C ±.05)


27235 - ENGLER VISCOMETER

230 V2 A50 Hz

8 Kgw 330 mmd 270 mmh 540 mm

521155 Engler flask 50 ml

27253 Engler f lask 100 + 100 ml27254 Engler flask 200 + 40 ml

27251 Engler thermometer w ith ring +10/+55°C in 0.5°C

27252 Engler thermometer w ith ring +10/+110°C in 1°C


48/81

SCOPE

This test method is used for evaluating the rust-preventive properties ofmetal preservatives under conditions of high humidity.


SCOPE

This test method covers the determination of the tendency of a lubricatinggrease to separate oil during storage in both normally filled and partiallyfilled containers.

REF. 9417786-test unit apparatus, complete, including air-pressure reducing valve andregulator, constant temperature oven, bleeding cups with cover and sievestrainers, with thermometer.

SPARE PARTS

9417781 200 mesh stainless steel sieve (type A)

12434 Beaker (20 ml)



941778 - OIL SEPARATION FROM GREASE


230 V10 A50 Hz

50 Kgw 700 mmd 650 mmh 950 mm


49/81

SCOPE

This test method covers determination of the changes in the consistency,as measured by cone penetr

na 2006 general catalogue

Documents