name: makeblock robot starter electronic kitthe makeblock me series modules is designed to be simple...
TRANSCRIPT
5-10 11-20 21-50 51+
15 20 25 30
59.49 55.99 52.49 48.99
Pictures:
Name: Makeblock Robot Starter Electronic Kit
ID: 40150 Colors/Variants:
Suggested Retail Price (USD): 69.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules come with a Arduino library for
easy programming.
This starter kit is design for building some basic robot application, such as IR remote
control robot or line finder robot.
With super easy-to-use RJ11 connectors and color tags, wiring is so easy even for users
without any electronic knowledge. We also provide libraies and example codes for all the
modules,
The Me base shield can plug in a Arduino compatiable board, provides 8 RJ11 ports,
with a TB6612 motor driver IC on it, can drive 2 motors.
The IR receiver is special design to guarantee the real-time response, since there is
special decoder IC in the receiver.
The line finder includes two sensors in one board, can be easily attached on Makeblock
mechanical parts.
Cables, acrylic box and battary holder included
PartstList
No Qty
1 1
2 1
3 14 15 1
6 1
7 1
8 1
9 3
Spec
Meduino UNO
Me Baseshield
Me IR Receiver
Me Line finder
battary holder
Acrylic box
USB cables
RJ11 cables
IR remote controller
5-10 11-20 21-50 51+
15 20 25 30
93.49 87.99 82.49 76.99
Pictures:
Name: Makeblock Robot Advanced Electronic Kit
ID: 40160 Colors/Variants:
Suggested Retail Price (USD): 109.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
PartstList
No Qty
1 1
2 1
3 14 1
5 1
6 1
7 1
8 1
9 1
10 1
11 1
12 6
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules come with a Arduino library for easy
programming.
This Advanced kit includes all modules in the starter kit, ie. Meduino UNO, Me base shield, Me
IR receiver, IR remote controller, Me linefinder. besides, there are additional modules : one Me
motor driver, one Me servo driver.
With super easy-to-use RJ11 connectors and color tags, wiring is so easy even for users without
any electronic knowledge. We also provide libraies and example codes for all the modules.
The Me base shield can plug in a Arduino compatiable board, provides 8 RJ11 ports, with a
TB6612 motor driver IC on it, can drive 2 motors.
The Me motor driver can drive one DC motor,with a RJ11 port which contains power lines and
signal lines, wiring is simpified.
The Me servo driver can drive two servos, with high efficiency DC-DC converter converts the
input voltage into suitable voltage for servos, wchich is 6V.
The IR receiver is special design to guarantee the real-time response, since there is special
decoder IC in the receiver. The line finder includes two sensors in one board, can be easily
attached on Makeblock mechanical parts.
Cables, acrylic box and battary holder included
Spec
Meduino UNO
Me Baseshield
Me IR ReceiverIR remote controller
Me motor driver
Me Line finder
Me Bluetooth modules
battary holder
Acrylic box
USB cables
RJ11 cables
Me servo driver
5-10 11-20 21-50 51+
15 20 25 30
16.99 15.99 14.99 13.99
Pictures:
Name: Makeblock Me base shield
ID: 1980503 Colors/Variants:
Suggested Retail Price (USD): 19.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules comes with a Arduino library for
easy programming.
The Me base shield can plug in a Arduino compatiable board, provides 8 RJ11 ports, all
Me series modules can be connected to these ports. with a TB6612 motor driver IC on
board, it can drive 2 DC motors.
Besides the 8 RJ11 port, there are 2.54mm pin pad on the board, all I/O pins on the
bottom Arduino board are conected to these pads.
5-10 11-20 21-50 51+
15 20 25 30
10.19 9.59 8.99 8.39
Pictures:
Name: Makeblock Me Motor driver
ID: 1280103 Colors/Variants:
Suggested Retail Price (USD): 11.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules comes with a Arduino library for
easy programming.
The Me motor driver can drive one DC motor,with a RJ11 port which contains power
lines and signal lines, wiring is simpified.
The motor driver IC on the board is TB6612, which is a high efficiency MOSFET driver,
with low heat disipation.
Over current protection included to stop the driver IC burned out.
2.54mm pads on board for connecting with jumper wires.
Input voltage: 4.5-13.5V
Output current: 2A (6A peak)
5-10 11-20 21-50 51+
15 20 25 30
11.04 10.39 9.74 9.09
Pictures:
Name: Makeblock Me Servo driver
ID: 1280203 Colors/Variants:
Suggested Retail Price (USD): 12.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules comes with a Arduino library for
easy programming.
The Me motor driver can drive two servos, with a RJ10 port which contains power lines
and signal lines, wiring is simpified.
With high efficiency DC-DC converter converts the input voltage into suitable voltage for
servos, wchich is 6V, no need to find special power supply for servos.
2.54mm pads on board for connecting with jumper wires.
5-10 11-20 21-50 51+
15 20 25 30
8.49 7.99 7.49 6.99
Pictures:
Name: Makeblock IR Receiver
ID: 1300203 Colors/Variants:
Suggested Retail Price (USD): 9.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules comes with a Arduino library for
easy programming.
This IR receiver includes a special decoder IC on board, for decoding the IR signal, this
extremly save the chip resources of the main control board, brings real-time response to
the IR controller. In other cases, the main controller(such as an Arduino Leonardo board)
is in charge of decoding the IR signal, this will cause non-response to the controller,
especially there are other calculation need to be done by the chip.
2.54mm pads on board for connecting with jumper wires.
5-10 11-20 21-50 51+
15 20 25 30
8.49 7.99 7.49 6.99
Pictures:
Name: Makeblock Line Finder
ID: 1240203 Colors/Variants:
Suggested Retail Price (USD): 9.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules comes with a Arduino library for
easy programming.
This line finder contains two sensors on board, one board is enough to build a line finder
robot.
2.54mm pads on board for connecting with jumper wires.
5-10 11-20 21-50 51+
15 20 25 30
16.99 15.99 14.99 13.99
Pictures:
Name: Makeblock Ultrasonic Ranger
ID: 1240103 Colors/Variants:
Suggested Retail Price (USD): 19.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules comes with a Arduino library for
easy programming.
This ultrosonic sensor can be used to messure distance, from 4mm to 5000mm.
2.54mm pads on board for connecting with jumper wires.
5-10 11-20 21-50 51+
15 20 25 30
4.24 3.99 3.74 3.49
Pictures:
Name: Makeblock Limit Switch
ID: LS23002 Colors/Variants:
Suggested Retail Price (USD): 4.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules comes with a Arduino library for
easy programming.
The limit switch on this board is high quility switch from Omron
2.54mm pads on board for connecting with jumper wires.
5-10 11-20 21-50 51+
15 20 25 30
16.99 15.99 14.99 13.99
Pictures:
Name: Makeblock Bluetooth module
ID: 1300103 Colors/Variants:
Suggested Retail Price (USD): 19.99 Package Weight:
Quantity:
Distributor Discount (%):
Distributor Price (USD):
Description:
The Makeblock Me series modules is designed to be simple to wire, easy to program, the
controller is compatiable with Arduino, each Me-modules comes with a Arduino library for
easy programming.
This is bluetooth 2.0 modules, can be slave and master mode.
2.54mm pads on board for connecting with jumper wires.