name of faculty dr. s. h. gawande designation associate...

1/9

Name of Faculty : Dr. S. H. Gawande

Designation : Associate Professor and In-charge PG Courses

Educational

Qualification :

PhD [Mechanical Engg.] [12th September-2012], COE, Pune, University of Pune M.E. [Mechanical-Design Engg.] [December-2002], VIT, Pune, University of Pune B.E. [Mechanical Engg.][ [May-2001], AEC,Chikhali, Dist. Buldana, Amravati University

Date of Joining : 23/02/2004

Experience : Teaching: 16 years Industry: 1.3 years

Area of

Specialization :

Design Engineering, Vibration Controls in Reciprocating Machines, Tribology.

Membership : ISTE India, SAE India, IACSIT Singapore, ACSE Dubai.

PhD Thesis Submitted:

Ph.D. Guidance :

1. Mr. Nitin D. Pagar, Mechanical & Materials Technology, Savitribai Phule Pune University, Department of Technology.

2. Mrs. Smita Veer, Mechanical Engineering, Savitribai Phule Pune University, Faculty of Enginnering.

PhD Going on:

3. Mr. Dhansingh K. Kokare, Mechanical Engineering, Savitribai Phule Pune University, Faculty of Enginnering.

4. Mr. Nitin D. Gadhave, Mechanical Engineering, Savitribai Phule Pune University, Faculty of Enginnering.

5. Mr. Sunil D. Wankhede, Mechanical Engineering, Savitribai Phule Pune University, Faculty of Engineering.

6. Mr. Nishikant B. Patil, Mechanical Engineering, Savitribai Phule Pune University, Faculty of Engineering.

7. Mr. Vipin Palhade, Mechanical Engineering, Savitribai Phule Pune University, Faculty of Engineering.

Awards and

Achievements :

1. Successfully organized 1st International Conference on Mechanical, Electronic Systems and Computer Engineering (ICMESCoE-2017) during 29-30th June-2017. All accepted papers are published in SCOPUS indexed Journals of Praise Worthy Prize (IREME, IRECAP, IREACO) [Quality Q1 & Q2].

2. Recognized PhD Guide & Post Graduate Teacher in Mechanical Engineering & Technology of S.P. Pune University.

3. Editor-in-Chief for Journal of Mechanical Design & Vibration

[JMDV] USA. http://www.sciepub.com/journal/JMDV/EditorialBoard

4. Member, Asian Council of Science Editors, Dubai. http://theacse.com/newmembers.php?pageNum_Recordset1=20&totalRows_Recordset1=351

5. Working as Scientific Program Committee member for

International Symposium on Engineering and Technology

http://www.sciepub.com/journal/JMDV/EditorialBoard

2/9

(ISET-2014, 2015) & International Conference on Design,

Manufacturing and Mechatronics, at KJ's Educational

Institutes, Pune, India.

6. Received Best Paper Award on PhD Work by IACSIT

Singapore in 2010 during IEEE Conference at Singapore.

7. Working as International Scientific Committee member & Reviewer for 2014 International Conference on Smart City [ICSC2014], Shanghai, China, December 25-26, 2014.

8. Worked as Reviewer for ICAAE-2010 Singapore, ICMET-2012, Dalian, China.

9. Worked as Program Committee Member at International Conference on Mechanical & Electrical Technology [ICMET2011], August 25-27, 2011, at Dalian, China.

10. Working as Editorial Board Member for Recent Patents in Mechanical Engineering, Publisher-Bentham Science, USA.

Invited Talk :

1. Delivered as Key Note Speaker during 3rd National Level Conference “”NCRDMECE-2018 on 23rd February 2018 at GHRCEM Wagholi Pune.

2. Delivered invited expert lecture “Design for Fluctuating Loads” of Machine Design-I subject” at G. H. Riasoni College of Engineering, Jalgaon, on 21/07/2016.

3. Delivered invited expert lecture on “Basics and Applications of Machine Design” at Rajghad Technical Campus, Shree Chattrapati Shivajiraje College of Engineering, Pune on 21/07/2016.

4. Delivered invited expert lecture during “One Day Quality Improvement Program On Recent Trends in Finite Element Analysis” on Saturday, 13th Feb. 2016 Organized under QIP Program of Savitribai Phule Pune University by P.E.S. Modern College of Engineering, Shivajinagar, Pune, Maharashtra, Pin- 411005.

5. Delivered invited guest lecture on “Significance of Research and Sources of Funding” at Dr.D.Y.Patil Institute of Engineering & Technology, Ambi-Talegaon Dabhade, Pune on 16 January 2016.

6. Delivered guest lecture on “Sources of Funding for Research in World” at Navsahyadri Education Societys College of Engineering, Pune on 09th December 2015.

7. Delivered Invited key note on “Vibration Control in Planetary Gear Train by Phasing Method” I at National Conference on “Recent Trends in Mechanical Engineering (RTME 2015)” on 21st March 2015 organized by. V. P. institute of Engineering & Technology, Soalpur.

8. Delivered expert lecture on “Recent Trends in research & development Opportunities in Mechanical Engineering, at Sahakar Maharashi Shankarrao Mohite-Patil Institute of Technology & Research, Akluj, Solapur on 30/07/2013.

3/9

9. Delivered expert lecture on “Research Methodology”, at YASHADA Pune on 01st September 2013 and 01st October 2013.

Reviewer

:

1. Energy, Publisher-Elsevier. Impact Factor-5.582 as per 2017 Journal Citation Report 2018, Thomson Reuters. Indexing-SCIE

2. Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, Springer International Publishing, . Impact Factor-0.732 as per 2017 Journal Citation Report 2018Indexing-WoS/SCIE, Scopus

3. Thin Walled Structures, Publisher-Elsevier. Impact Factor-3.037 as per 2017 Journal Citation Report 2018, Thomson Reuters. Indexing-WoS/SCIE, Scopus

4. International Journal of Dynamics and Control (IJDY), Springer International Publishing, Indexing-Scopus

5. IEEE Transactions on Industrial Informatic, Impact Factor-4.708, as per 2015, Journal Citation Report, Thomson Reuters. Indexing-WoS/SCIE, Scopus

6. Applied Acoustics, Publisher-Elsevier. Impact Factor-1.921 per 2016, Journal Citation Report, Thomson Reuters. Indexing-SCIE

7. Journal of Mechanical Science and Technology, Impact Factor-0.838, as per 2014, Journal Citation Report, Thomson Reuters. Springer International Publishing, Indexing-SCIE

8. Journal of Vibration and Control Publisher-Sage Publications. Impact Factor-4.355 as per 2013 Journal Citation Report, Thomson Reuters. Indexing-SCIE

9. Control Engineering Practice, Publisher-Elsevier. Impact Factor-2.213 as per 2015 Journal Citation Report, Thomson Reuters. Indexing-SCIE

10. Journal of Hydraulic Engineering, Publisher-American Soc. Civil Engineering, Impact Factor-1.284 as per 2016 Journal Citation Report, Thomson Reuters. Indexing-SCIE/Scopus

11. Recent Patents in Mechanical Engineering (Intl. Journal), Publisher-Bentham Science, USA. Indexing-SCIE/Scopus

Publications in

National &

International

Journals and

Conferences

:

1. In Trans. & Journals indexed in WoS/SCIE/ESCI :20 2. In Trans. , Journals & Proc. Indexed in CPCI, EI, Scopus. :48 3. In Journals Indexed in Crossref & Google Scholar : 83 4. In International Conferences (IEEE/ASME): 04 5. In National Conferences : 16

For more information:

https://www.researchgate.net/profile/Shravan_Gawande https://www.scopus.com/authid/detail.uri?authorId=55387539400

http://scholar.google.co.in/citations?user=63TOnb4AAAAJ&hl=en

http://scholar.google.co.in/citations?user=63TOnb4AAAAJ&hl=en

4/9

List of Publications by Dr.S.H.Gawande

Sr. No. Title of the Paper Name of the journal & Publisher Status/Mo

nth of Publication

As a Main Author:

1. Critical Hydraulic Eccentricity Estimation in Vertical Turbine Pump Impeller to Control Vibration

Paper ID-TMAR-2020-0063, Journal of Marine Engineering & Technology, Print ISSN: 2046-4177 Online ISSN: 2056-8487, Publisher: Taylor and Francis, Indexing-SCIE/Web of Science/Scopus

Under Review

2. Heat Transfer Augmentation in a Circular Tube Fitted with Tri- Partition Flow Splitters

Paper ID- TAEN-2020-0511, International Journal of Ambient Energy, Print ISSN: 0143-0750 Online ISSN: 2162-8246 Publisher: Taylor and Francis, Indexing-SCIE/Web of Science/Scopus

Under Review

3. Effect of process parameters on Coefficient of Friction in Tube Hydroforming

Paper ID- JBTC-D-20-00136, Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220, ISSN(e): 2198-4239, Paper ID- JBTC-S-18-00079, Publisher Springer International Publishing, Indexing-SCOPUS.

Under Review

4. Reducing instabilities of mesh stiffness variation in two-stage gear using phasing method

JMST Advances, Print ISSN: 2524-7905, Online ISSN: 2524-7913, Vol.2, No.3, 2020. Publisher Springer International Publishing, Indexing-SCOPUS.

Sept. 2020

5. Study on Tribological Investigations of Alternative Automotive Brake Pad Materials

Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220, ISSN(e): 2198-4239, Vol.6, No.3, 2020, Publisher Springer International Publishing, Indexing-SCOPUS.

July 2020

6. Bio-Lubricants for Hydrodynamic Bearings


June 2020

7. Study on Influence of Friction on Process Parameters in Tube Hydroforming


June 2020

8. Influence of Lubricants on Coefficient of friction in Tube Hydroforming

Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220, ISSN(e): 2198-4239, Vol.6, No1, 2020, Publisher Springer International Publishing, Indexing-SCOPUS.

Jan.2020

9. Performance evaluation of EN24 for planetary gear transmission of CNC bending machine

Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol.42, No. 6, 2020, Publisher: Springer International Publishing, Indexing-SCIE/Web of Science/Scopus

May 2020

5/9

10. Parametric design analysis of meridional deflection stresses in metal expansion bellows using gray relational grade

Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol. 42, No. 4, May 2020. Publisher: Springer International Publishing, Indexing-SCIE/Web of Science/Scopus

April 2020

11. Multi-response design optimisation of convolution stresses of metal bellows using integrated PCA-GRA approach

Australian Journal of Mechanical Engineering,

Print ISSN: 1448-4846 Online ISSN: 2204-2253,

In press, Publisher: Taylor and Francis, Indexing-

ESCI/Web of Science/Scopus

https://doi.org/10.1080/14484846.2020.1725347

Feb. 2020

12. Dynamic Analysis of End Conditions for Shell Side Pipings of STHE

Paper No: GTINDIA2019-2775, V001T05A021; 14

pages, ASME 2019 Gas Turbine India Conference,

Dec. 5–6, 2019, Chennai, Tamil Nadu, India.

ISBN: 978-0-7918-8352-5, Indexing: WoS (CPCI),

Scopus etc.

https://doi.org/10.1115/GTINDIA2019-2775

Dec.2019

13. Experimental Investigations on Meridional and Circumferential Stresses of Bellows due to Internal Pressure

Paper No: GTINDIA2019-2771, Proc. ASME.

GTINDIA2019, Vol.1: Compressors, Fans, and

Pumps; Turbines; Heat Transfer; Structures and

Dynamics, V001T05A020, Dec. 5–6, 2019.

Indexing: WoS (CPCI), Scopus etc.

DOI: https://doi.org/10.1115/GTINDIA2019-2771

Dec.2019

14. Assortment of Hydroforming fluid for Extreme Pressure and Anti Wear Properties

Proc. ASME. IMECE2019, Vol. 12: Advanced

Materials: Design, Processing, Characterization, and

Applications, (IMECE2019), Nov.11-14, 2019, Salt

Lake City, Utah, USA

Indexing: WoS (CPCI), Scopus etc.

https://doi.org/10.1115/IMECE2019-10163

Nov. 2019

15. Design Optimization of Toggle Clamping Mechanism

Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, ISSN (Print): 2228-6187, ISSN(e): 2364-1835, Vol. 43, No.4, 2019, Publisher: Springer International Publishing, Indexing-SCIE/Web of Science/Scopus https://link.springer.com/article/10.1007/s40997-018-0237-y

December 2019

16. Recreation of service loads using strain gauges of speed shifting lever

Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol. 41, No. 10, Oct. 2019. Publisher: Springer International Publishing, Indexing-SCIE/Web of Science/Scopus

Oct. 2019

17. Study on the effect of gasket thickness for bolted gearbox flange joint

SN Applied Sciences Vol. 1, No.9, Online ISSN:2523-

3971, Publisher Springer International Publishing,

Indexing- ESCI (WoS), SCOPUS.

Sept. 2019

18. Some Investigations on Effect of Notch on Dynamics Characteristics of Cantilever Beams

International Journal Acoustic & vibrations [IJAV], ISSN (Print/online): 1027-5851, Publisher: International Institute of Acoustics and Vibration (IIAV), Vol. 24, No.1, pp. 20-27 March 2019, Indexing- SCIE/Web of Science and Scopus.

March 2019

https://doi.org/10.1115/GTINDIA2019-2775https://doi.org/10.1115/IMECE2019-10163https://link.springer.com/journal/42452

6/9

19. A Combined Numerical and Experimental Investigation on the Effect of Dynamics Characteristics of Metal Expansion Bellows

Journal of Vibration Engineering & Technologies

Vol. 6, No.5, pp.401–416, 2018

Publisher: Springer International Publishing,

Indexing-SCIE/Web of Science/Scopus

Oct. 2018

20. Experimental Study on Tribological characteri-stics of Steel Alloys for CNC Bending Machine

Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220, ISSN(e): 2198-4239, Vol.4, No. 4, 2020Paper ID- JBTC-S-18-00079, Publisher Springer International Publishing, Indexing-SCOPUS.

2018

21. Optimisation of Torsional Stiffness of Heavy Commercial Vehicle Chassis Frame"

Automotive Innovation, AUIN-D-18-00017, ISSN (Print): 2096-4250, ISSN(e): 2522-8765), Vol.1, No. 4, pp. 352-361, Nov. 2018 Publisher: Springer International Publishing, Singapore. Indexing-SCOPUS.

Nov. 2018

22. Numerical and Experimental Investigations on Metal Expansion Bellows for STHE

Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol. 40, No.9, 2018 Publisher: Springer International Publishing, Indexing-SCIE/Web of Science/Scopus

Sept.2018

23. Tribological Behaviors of Steel and Al Alloys for Hydroforming Components

Journal of Bio- and Tribo-Corrosion, ISSN(Print)- 2198-4220, ISSN(e): 2198-4239, Publisher Springer International Publishing, Vol.4, No.3, 2018 Indexing-SCOPUS.

2018

24. Optimizing performance of the Jatropha biodiesel engine using Taguchi approach

Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN (print): 1678-5878, ISSN(e): 1806-3691, Vol.40, No.4, pp.1-13, Publisher-Springer Berlin Heidelberg, Indexing-SCIE/Web of Science/Scopus

April 2018

25. Dynamic analysis of Compressor Mounting Bracket in Automobiles

International Review of Mechanical Engineering (IREME), ISSN (p): 1970-8734, ISSN (e): 2532-5655, Vol.12, No.1 pp. 55-59, 2018. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS (Q2)

January 2018

26. Numerical and Experimental Analysis of Compressor Mounting Bracket in Automobiles

International Review of Mechanical Engineering (IREME), ISSN (p): 1970-8734, ISSN (e): 2532-5655, Vol.12, No.1 pp. 55-59, 2018. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS (Q2)

January 2018

27. Performance Evaluation of Mechanical Power Amplifier for Various Belt Materials

The Open Mechanical Engineering Journal, ISSN(e): 1874-155X, Vol.12, pp. 95-107, Publisher-Bentham Science Open, Sharjah, U.A.E, https://www.benthamopen.com/TOMEJ/VOLUME/12/ Indexing-Scopus

2018

28. Optimization of Process Parameters to Study the Influence of the Friction in Tube Hydroforming

Journal of Bio- and Tribo-Corrosion, Vol.3, No. 4, pp. 1-7, ISSN(Print)- 2198-4220, ISSN(e): 2198-4239,

, , Indexing-SCOPUS.

December 2017

29. Experimental Investigations of Vibration Reduction in Spur Gear Pair by Method

Journal of Vibration Engineering & Technologies, ISSN (Print/online): 2321-3558, Publisher- Krishtel eMaging Solutions Pvt. Ltd, India, Vol.5, no.6, pp. 569 – 581, 2017, Indexing-SCIE/ Web of

December 2017

7/9

of Phasing Science and SCOPUS.

30. Optimization of Design Parameters of Bellows Using Taguchi Method

International Review of Mechanical Engineering (IREME), ISSN (p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.7 pp. 743-747, 2017. Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS

October 2017

31. Design and Analysis of Performance Oriented Road Legal Muffler


October 2017

32. Topology Optimization and Stress Validation of the Hand Brake Lever


July 2017

33. Numerical and Experimental Investigation of Structural Gasketing Approach for Gearbox Flange

International Review of Mechanical Engineering (IREME), ISSN (p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.7 pp. 520-529, 2017 . Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS

July 2017

34. Optimization of CI engine vibration characteristics operated on jatropha methyl ester using taguchi and multiple regression analysis.

International Review of Mechanical Engineering (IREME), ISSN (p): 1970-8734, ISSN (e): 2532-5655, Vol.11, No.6 pp. 367-372, 2017 . Publisher: Praise Worthy Praize, Italy. Indexing-SCOPUS

June 2017

35. Experimental study on the effect of water injection in an internal combustion engine.


June 2017

36. Performance Estimation of Charge Air Cooler for Passenger Car


June 2017

37. A Combined Numerical and Experimental Investigation on the Effect of Dynamics Characteristics of Metal Expansion Bellows

Journal of Vibration Engineering & Technologies, ISSN (Print/online): 2321-3558, Vol.6, No.6, 2018 Publisher- Krishtel eMaging Solutions Pvt. Ltd, Manuscript No. JVET/CW/718, India, Indexing-SCIE/ Web of Science, SCOPUS,

Dec. 2018

38. Effect of Notch Depth & Location on Modal Natural Frequency of Cantilevers Beams

Structure (Int. Journal), ISSN (Print): 2352-0124, Vol.8, Part1 pp.121–129, Publisher-Elsevier, Indexing-SCIE/Web-of-Science/Scopus. http://dx.doi.org/10.1016/j.istruc.2016.09.003

Nov. 2016

39. Some Investigations on Effect of Notch on Dynamics Characteristics of Cantilever Beams

International Journal Acoustic & vibrations [IJAV], ISSN (Print/online): 1027-5851, Publisher: International Institute of Acoustics and Vibration (IIAV), Vol. 22, No.4, pp. 493500, December 2017, Indexing- SCIE/Web of Science and Scopus.

Dec. 2017

40. Experimental Investigation of Transverse Machine Tool Vibration Using Passive Damping

Journal of Vibration Analysis, Measurement, and Control, ISSN: 2162-9854 (Online), Vol. 4, No. 2, pp. 69-84, 2016. Publisher- Columbia International Publishing (CIP). DOI: 10.7726/jvamc.2016.1006

July 2016

8/9

41. Design Optimization of Precision Casting for Residual Stress Reduction

Journal of Computational Design and Engineering, ISSN (Print): 2288-4300, Vol.3, No. 2, pp. 140–150, 2016, Publisher-Elsevier, Indexing-SCIE/Web-of-Science, DOI:10.1016/j.jcde.2015.10.003

Nov. 2016

42. Tribological Behaviour of High Fraction Carbon Steel Alloys

Journal of Bio- and Tribo-Corrosion, ISSN (Print)-2198-4220, ISSN (Online)-2198-4239, Vol.2, No.1, pp.1-9, 2016 Publisher: Springer International Publishing, Indexing-Scopus DOI: 10.1007/s40735-016-0034-3

January 2016

43. Effect of Impacting Particle Kinetic Energy on Slurry Erosion Wear

Journal of Bio- and Tribo-Corrosion, ISSN (Print)-2198-4220, ISSN (Online)-2198-4239, Vol.1, No.4, pp.1-9, 2015, Publisher: Springer International Publishing, Indexing-Scopus, DOI: 10.1007/s40735-015-0028-6

October 2015

44. Dynamic Modeling of PGT using Analytical & Numerical Approach

Journal of Mechanical Design and Vibration (JMDV), ISSN (Print): 2376-9564, ISSN (Online): 2376-9572, Vol. 3, No. 1, 2015, 24-30, Publisher: Science and Education Publishing, USA, http://pubs.sciepub.com/jmdv/3/1/3/ DOI: oi: 10.12691/jmdv-3-1-3

2015

45. Performance Evaluation of Globe Valve as Control Valve using CFD Software

Pumps Valves and Systems, Publisher-Kirloskar Brothers Ltd, ISSN (Print):2347-808X, Vol. 6, No. 6, 26-38, 2015

July-August 2015

46. Numerical Investigations on Characteristics of Stresses in U Shaped Metal Expansion Bellows

International Journal of Metals, Publisher: Hindawi Publication Corp. USA. ISSN(Print) 2314-680X, Vol. 2015, Paper no.- 957925. Submitted on 05/05/2015. http://dx.doi.org/10.1155/2015/957925 This work was supported by Alfa Laval India Ltd, Pune.

2015

47. Experimental Investigations of Noise Control in Planetary Gear Set by Phasing

Journal of Engineering, ISSN (Print): 2314-4904, ISSN (Online): 2314-4912, Vol.2014, Publisher: Hindawi Publication Corp. USA. Indexing-ESCI/Web of Science/Scopus http://dx.doi.org/10.1155/3962/857462

Nov. 2014

48. Noise Level Reduction in Planetary Gear Set

Journal of Mechanical Design and Vibration (JMDV), ISSN (Print): 2376-9564, ISSN (Online): 2376-9572, Vol. 2, No. 3, 2014, 60-62, Publisher: Science and Education Publishing, USA, http://pubs.sciepub.com/jmdv/2/3/1 DOI:10.12691/jmdv-2-3-1

July 2014

49. Investigations of Dynamic Characteristics of Eccentric Rotary Shaft of Wankel engine

Journal of Mechanical Design and Vibration, (JMDV), ISSN (Print): 2376-9564, ISSN (Online): 2376-9572, Vol. 2, No. 2, 2014, 53-59, Publisher: Science and Education Publishing, USA, http://pubs.sciepub.com/jmdv/2/2/3 DOI:10.12691/jmdv-2-3-3

June 2014

http://link.springer.com/journal/40735http://link.springer.com/journal/40735

9/9

50. 2.

Design, Manufacturing & Analysis of Differential Crown Gear and Pinion for MFWD Axle

Special Issue of Journal of Mechanical & Civil Engineering, ISSN (e): 2278-1684, ISSN (p): 2320–334X, Vol.2, Page No.59-66, Publisher: International Organization of Scientific Research, Ghaziabad.www.iosrjournals.org. This work was supported by Carraro India Ltd, Pune.

April 2013

51. 3.

Die Casting Defect Analysis & Experimental Validation for Compressor Housing

Special Issue of Journal of Mechanical & Civil Engineering, ISSN (e): 2278-1684, ISSN (p): 2320–334X, Vol.1, Page No.55-61, Publisher: International Organization of Scientific Research, Ghaziabad.www.iosrjournals.org. This work was supported by Minda Spark India Ltd, Pune.

April 2013

52. Analysis STHE to Identify Low Stress Area for Locating Nozzle Openings

Special Issue of Journal of Mechanical & Civil Engineering, ISSN(e): 2278-1684, ISSN(p): 2320–334X, Vol.2, Page No.44-49, Publisher: International Organization of Scientific Research, Ghaziabad.www.iosrjournals.org. This work was funded by Alfa Laval India Ltd, Pune.

April 2013

53. 5 Design and Development of Shell & Tube Heat Exchanger for Beverage

Modern Mechanical Engineering (MME), ISSN (Print): 2164-0165, ISSN (Online): 2164-0181, Vol.2, no.6, Page No. 121-125, November, 2012, Publisher- Scientific Research, California, USA. This work was funded by Alfa Laval India Ltd, Pune, DOI:10.4236/mme.2012.24015

November, 2012

54. 6.

Power Balancing of Inline Multi-cylinder Diesel Engine

Advances in Mechanical Engineering, ISSN (Print): 1687-8132, ISSN (Online): 1687-8140, Vol.2012, Publisher: SAGE Publication Corp. USA, Paper ID-937917, DOI:10.1155/2012/937917, Indexing- SCIE/Web of Science, SCOPUS, Impact Factor : 0.848, JCR 2017, Thomson Reuter-2018. This work was supported by Greaves Cotton Ltd, Pune & KOEL Pune.

October 2012

55. 7.

Fault Detection of Inline Reciprocating Diesel Engine- A Mass & Gas Torque Approach

Advances in Acoustic and Vibration, ISSN (Print): 1687-6261, ISSN (Online): 1687-627X, Vol.2012, Publisher: Hindawi Publication Corp. USA. Paper no.- 314706 DOI:10.1155/2012/314706, Indexing- ESCI/Web of Science, Scopus.

July 2012

56. 8.

Identification and Analysis of Engine Speed and Noise in In-line Diesel Engine

Jordan Journal of Mechanical and Industrial Engineering (JJMIE), Hashemite University, ISSN (Print): 1995-6665, Feb. 2012, Vol.6, No.1, Page No.71 – 74, Publisher-Hashemite University, Jordan Republic. Indexing- ESCI/Web of Science, Scopus.

February 2012

57. 9.

Design Optimization of Shell and Tube Heat Exchanger by Vibration Analysis,

Modern Mechanical Engineering (MME), ISSN (Print): 2164-0165, ISSN (Online): 2164-0181, Vol.1, no.1, Page No. 6-11, August 2011, Publisher- Scientific Research, California, USA. This work was funded by Alfa Laval India Ltd, Pune, DOI:10.4236/mme.2011.11002

August 2011

58. 10.

Dynamic Vibration Analysis for Multi-Cylinder Diesel Engine of

International Journal of Science and Advanced Technology (IJSAT), ISSN (Print): 2304-652X, ISSN (Online) 2221-8386, Volume 1, No. 2, Page.

April 2011

10/9

SL90 Type No.55-61, April 2011. 59. 1

1.

Detecting Power Imbalance in Multi-Cylinder Inline Diesel Engine Genset

Journal of Electronic Science & Technology (JEST International), ISSN (Print): 1674-862X, China, Vol. 8 No. 3, Sept. 2010, Page. No.273-278, Indexing- ESCI/Web of Science, Scopus,

DOI:10.3969/j.issn.1674-862X.2010.03.013.

Sept. 2010

60. 12.

Cylinder Imbalance Detection of Six Cylinder DI Diesel Engine Using Pressure Variation

International Journal of Engineering Science and Technology (IJEST), ISSN (Print): 2278-9510, ISSN (Online): 0975-5462, Vol. 2, no.4, April 2010, Page No.433-441, , [Index Copernicus (I C Value)-3.14, 2013]

April 2010,

61. 13.

Torsional Frequency Analysis of Multi-Cylinder Inline Diesel Engine Generator System

Proc. ASME, ISBN:978-0-7918-5954-4, Vol. 1, Page No. 519-52, Publisher-ASME Press. Indexing- CPCI/Web of Science/Scopus. DOI-10.1115/1.859544.paper81.

January 2010

62. 14.

Harmonic Frequency Analysis of Multi-Cylinder Inline Diesel Engine Gen-set for Detecting Imbalance,

International Review of Mechanical Engineering (IREME) International Journal), ISSN (Print):1970–8734, ISSN (Online):1970 - 8742 Vol.3, No.6, Page No. 782-787, November 2009, Publisher- Praise Worthy Prize S.r.l, Italy Indexing- Scopus.

November 2009

As a Co-Author:

63. 15.

A Comparative Study on Different Types of Approaches to Text Categorization

International Journal of Machine Learning and Computing (IJMLC), ISSN (Print): 2010-3700, Vol. 2, No. 4, Page No.423-426, August 2012. Publisher-IACSIT Singapore. Italy Indexing- Scopus. DOI: 10.7763/IJMLC.2012.V2.158

August 2012

64. 16.

M-Commerce Security using Random LSB Steganography and Cryptography

International Journal of Machine Learning and Computing (IJMLC), ISSN (Print): 2010-3700, Vol. 2, No. 4, Page No.427-430, August 2012. Publisher-IACSIT Singapore. Italy Indexing- Scopus. DOI: 10.7763/IJMLC.2012.V2.159

August 2012

65. 17.

Real- time Static Hand Gesture Recognition For American Sign Language (ASL) in Complex Background

Journal of Signal and Information Processing [JSIP], ISSN (Print): 2159-4465, ISSN (Online): 2159-4481, Vol.3, no.3, August 2012, Publisher- Scientific Research, California, USA, DOI: 10.4236/jsip.2012.33047

August 2012,

66. 18.

Design Optimization of Cam & Follower Mechanism of an Internal Combustion Engine for Improving the Engine Efficiency

Modern Mechanical Engineering (MME), ISSN (Print): 2164-0165, ISSN (Online): 2164-0181, Vol.2, No.3, August 2012, Page No. 114-119, Publisher- Scientific Research, California, USA. This work was supported by MAN Trucks India Pvt. Ltd., Pune, India, Pune, DOI: 10.4236/mme.2012.23014

August 2012

67. 19.

Finite Element Analysis of Dynamic Damper for CV Joint

Energy Power and Engineering (EPE), ISSN (Print): 1949-243X, ISSN(Online): 1947-3818, Vol.4, no.4, Page No. 241-247, July 2012, Publisher- Scientific Research, California, USA. DOI:10.4236/epe.2012.44033

July 2012

68. 20

Experimental and Finite Element Stress Analysis Of

Proc. ASME 2011 , Vol.1, Page No. 453-458, ISBN: 0-7918-5981-9, August 26-27, 2011, Publisher-

August 2011

http://dx.doi.org/10.1115/1.859544.paper81http://dx.doi.org/10.4236/jsip.2012.33047

11/9

. Three Wheeler Front Fender

ASME Press. DOI: 10.1115/1.859810.paper74

69. 21.

Experimental Investiga-tions of Bearing Capacity for Eccentrically Loaded Footing

International Journal of Engineering Science and Technology (IJEST), ISSN (Print): 2278-9510, ISSN (Online): 0975-5462, Vol. 2, no.10, October 2010, Page No. 5255-5262, [Index Copernicus (I C Value)-3.14, 2011-12].

October 2010

70. 22.

Experimental Investiga-tions of Surface Roughness On OFHC Copper By Diamond Turning Machine,

International Journal of Engineering Science and Technology (IJEST), ISSN (Print): 2278-9510, ISSN (Online): 0975-5462, Vol. 2, No.10, October 2010, Page No. 5215-5220, [Index Copernicus (I C Value)-3.14, 2011-12].

October 2010

71. 23.

Design & Development of Attachment for Hydraulic Stacker

International Journal of Engineering Science and Technology (IJEST), ISSN (Print): 2278-9510, ISSN: 0975-5462,Vol. 2, No.5, May 2010, Page No. 796-801, work was Funded byA.V.L Seating System Ltd. Pune[Index Copernicus (I C Value)-3.14, 2011-12].

May 2010

72. 24.

Experimental Investiga-tions of Weld Characteristics For A Single Pass TIG Welding With SS304

International Journal of Engineering Science and Technology (IJEST), ISSN (Print): 2278-9510, ISSN (Online): 0975-5462, Vol. 2, no.8, Page No. 3676-3686, April 2010, [Index Copernicus (I C Value)-3.14, 2011-12].

April 2010

73. 25.

Design and Development of Powerised Blade Valve for Automated Packaging of Heterogeneous Mixtures,

World Academy of Science Engineering & Technology [WASET], ISSN (Print): 2070-3724, Vol.69, Page No. 478-481, Feb. 2010. This work was funded by Nichrome India Ltd, Pune.

February 2010

Papers Presented in National & International Conferences in India 74. 2

6.

Computer Aided Design & Simulation of Steering Gear Mechanism

Presented in 3rd National Conference on ‘Recent Developments in Mechanical Engineering [RDME-2013] at M.ES. College of Engg. Pune-01

13-14, March, 2014

75. 2

7.

Flow Induced Vibration Analysis Of Shell And Tube Heat Exchanger

Presented in National Conference on ‘Recent Developments in Mechanical Engineering [RDME-2011] at M.ES. College of Engg. Pune-01

4-5, July, 2011

76. 2

8.

Geometric Design Of Spiral Tube Heat Exchanger

Presented in National Conference on [RDME-2011] at Modern Education Society’s College of Engineering, Pune-01

4-5, July, 2011

77. 2

9.

Study Of Influence Of Crack On Transmission Shaft By Finite Element Analysis

Presented in National Conference on [RDME-2011] at Modern Education Society’s College of Engineering, Pune-01

4-5, July, 2011

78. 30.

Use of Computers in Tribology: Computer Tribology

National Conference NCRP-2006, VNIT Nagpur 10-11 March-2006

79. 31.

3D Finite Element Analysis by Using JAVA 3D API

International Conference on ICMPM, At BIT Coimbatore , Tamil-Nadu, India

12-14 Dec-2005

80. 3

2.

Analysis of Bearings and lubricants in Electric Environment

4th National Symposium META VISTA-2004 PIET Pune-05

16-18 Feb-2005

12/9

81. 33.

Analysis of Rolling Element Bearing and lubricants in Electric Environment

National Conference AIM-2005 at VCE Hyderbad, Osmania University

12-14 May-2005

82. 34.

Evaluation of Evolvability of ANN for Robot Control

National Conference AIM-2005 at VCE Hyderbad, Osmania University

12-14 May-2005

83. 35.

Tribological Analysis of Gear & Gearbox Problems

1st National Conference YANTRA - 2005 at COE Pandharpur

23-24 Dec-2005

*****

name of faculty dr. s. h. gawande designation associate...

Documents