nano composite coating in ship building materials

11
INFLUENCE OF NANO COMPOSITE COATING IN SHIP BUILDING MATERIAL KAVITHAYENI.V 115012305001

Upload: kavithayeni-vijayakumar

Post on 03-Mar-2017

78 views

Category:

Engineering


0 download

TRANSCRIPT

Page 1: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

INFLUENCE OF NANO COMPOSITE COATING IN SHIP BUILDING MATERIAL

KAVITHAYENI.V115012305001

Page 2: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

OBJECTIVE

You can replace this sample textNano composite coating provides more mechanical strength with light weight to the materials.

1

The main objective is to prevent the oil leakage in seas after accident occurs.2

Page 3: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

OVER VIEW

5 SYNTHESIS

4 MATERIAL WE PREFER

3 CONVENTIONAL COATING

2 TIMELINE

1 INTRODUCTION

Page 4: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

Zinc Silicate Coating

Epoxy Coating

Antifouling coating

Fouling coating

TIMELINE

Page 5: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

CONVENTIONAL COATING MERITS AND DEMERTIS

1 Doesn't resist to alkaline greater than pH 9 and acids less than pH 6.

2 Fouling and antifouling coating corrodes when overly expose to nature.

3 zinc silicate gives life time of maximum 30 years.

4 Epoxy coatings generally possess a good resistance against alkalis.

Page 6: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

MATERIAL WE PREFER

• Due to their unique physical property and one more thing is, this is a composite material, which can also be sticked to the materials easily.

CF AEROGEL

• A mineral package as the capability of purifying the metal electroplating wastes and also in wastes water treatment.

ZEOLITE

Page 7: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

PROPERTIES OF CARBON FIBER AEROGEL

1 Low apparent density of ca10 mg cm−3,.

2 The high porosity is in accordance with SEM and TEM observations

3 It can support a weight of at least 500 g even though the aerogel itself weighs only 56.1 mg.

4 The maximum compressive stress is up to 85 kPa before fracture.

Page 8: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

PROPERTIES OF ZEOLITE

• Oil absorption media is a mixture of anthracite and modified zeolite or clay, mixed with anthracite in a 70:30 ratio of anthracite to active ingredient. Thus, the capacity for oil ranges from 60-90% of the total weight of the media.

• Maximum flow velocity into a unit is 5 gpm/ft2. Also have the capability of removing arsenic from water and other organic compounds gives toxic to the water.

• The foremost thing to note is zeolite is a mineral which can be easily used for coating.

ZEOLITE

Page 9: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

SYNTHESIS

Sol-gel process

Step 1

Step 2

Step 3

Step 4

AGING

DRYING

CARBONIZATION

Page 10: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

CONCLUSION

This concept will establish a new revolution in the marine field.

It’s cost efficient too. And gives more life time to the ships.

Page 11: NANO COMPOSITE COATING IN SHIP BUILDING MATERIALS

Thank you slide

V.KAVITHAYENI

9898765901

[email protected]

PERIYAR MANIAMMAI UNIVERSITY,VALLAM THANJAVUR