nanotechnology solutions for oil & gas industry

Proudly Presented to ___________

Introducing Nano-Quark Polycarbon/Polycarbonate

Technology Solutions

Strategic Alliance

NanolandGlobal has developed a Strategic Alliance with ICP-Proseal & ECCO of America bringing amazing Nano-Quark technology Polycarbon / Polycarbonate processed products for the repair, remediation and/or transformation of…

– Concrete

– Steel

– Wood

– Glass

Nano-Quark Tech Products Unveiled

Polycarcarbon/Polycarbonate Nano-Quark technology products are hi-tech, high density, high molecular weight elastoglasoplastic material compounds for remediation, restoration, waterproofing, water repelling, transformation and/or sealing of concrete, metal, glass, wood and most all solid composition materials on earth and beyond…used in NASA space shuttles. Polycarbon/Polycarbonate compounds seek moisture from both outside and within while creating molecular and chemical bonding which is vastly superior to all other known products such as urethanes, epoxies and polyurethanes all of which merely bond mechanically.

Hydrocarbon cross linked technologies with Cross-Polymers rubber band connecting rocks

Vitriform Polycarbon/Polycarbonate Technology with Cross-Polymers complete vitriform technology

POLYCARBON/POLYCARBONATE VS HYDROCARBONS

Oil & Gas Industries

Vast Cost Savings Applications

• Oil & Gas Refinery Remediation – Pipelines

• Exterior Rust Conversion

• Internal Flow Deterioration Control

• Joint sealant & repairs

– Concrete • Spall repairs

• Crack repairs-Injection

• Crack repairs-Casting

• Full chemical protection

– And much more


• Seaports

Pier Repairs

Sea Wall Repairs

Negative Side Repairs

Warehousing floor coatings

Roofing Systems

Facilities Maintenance Systems

Port of San Diego


Off-Shore Rigs • Pylon underwater repairs • Rust conversion/protection • Steel reinforcement • Paint salt protection


• Fleet Truck Maintenance

– Paint UV Protection

– Window protection

– Soil Retardant

Vast Cost Savings Applications Facilities Building Envelope

Top 10 Pro-seal Products

1. DP36-Concrete infrastructure contaminant remediation 2. PS34-Caulking seals thru running water, oil, even WD40 3. Ultra-Shield IIA- Hydrocarbon Protection & UV Resistant film

sealer 4. SP12-Breathable penetrating sealer for porous substrates 5. DG7-Powerful Non-solvent Degreaser, dissolves even mastic 6. Power Patch-Spall repairs, Injection, Casting 23,000 PSI 7. AquaCrete-Screed coat for Negative side repairs 8. ProThane-230-Joint or crack caulking…12,000 PSI 9. RC850-Converts rust back into Steel 10. Liquid Steel-Concrete structural failure remediation-11X

stronger than steel-two layers incredible 123,000 PSI


• Pro-Seal DP-36®-single component

reactive osmotic reagent that seals, densifies, waterproofs, hardens, reduces vapor drive and preserves most concrete substrates when used as part of most all concrete work with any Pro-Seal® system. Densifies concrete 18-22%.

• Applications – On Grade

– Below Grade

– Negative Side

– Vertical or Horizontal or over-head applications

Panama Canal


• PS34-Single component sealant material. Stops leaks and seals on contact even through water and oil! Gunable from 38° F to 98° F and may be applied to surface temperatures ranging from -70° F to +220° F.

• Applications • Steel • Galvanized metal • Kynar coated metal • Plater • Wood • Aluminum • Stone • Concrete • Vinyl • Boats • Recreational Vehicles • and more

Alaska Pipeline


• SP12 single component Polycarbon/

polycarbonate integrated technology one-coat penetrating breathable sealer that completely seals most porous substrates, such as grouting, brick-work, etc.

Advantages • Prevents moisture penetration • Will not alter color of substrate • Retards pitting, rusting and dusting • Resists penetration of many oils,

acids, eases and salts • U.V. Impervious • Long lasting • Water resistant seal • No V.O.C. • 7-10 year warranty available when

applied by a certified applicator


UltraShield-IIA

• Resistant to brackish water • High U.V. resistance • Long term adhesion


DG7 A. Apply DP36 to concrete

B. Allow to extract all oil, Hydraulic fluids & all other latent contaminants 48-72 hours

C. Apply DG7 to coagulate all contaminants

D. Rinse all residue with clean water and dispose

A

B

C

D


• Pro-Seal Power PatchTM

• Crumbling, deteriorating

tunnel concrete ceiling that is

ready to cave in.

• Pro-Seal Power PatchTM

filled the spalls and sealed the

rebar with a powerful

compressive strength of

23,000 PSI.

Before

After


• Pro-Seal Aqua CreteTM

single component breathable elastomeric coating with exceptional elongation and elasticity for decorative finishes over negative side trowel coats.

• Applications – Concrete

– CMU Block

– Stucco

– Areas of greater expansion and contraction requiring a water barrier

•


• Pro-Seal Pro-Thane 230TM is a

single component Polycarbon/ Polycarbonate caulking that is specifically formulated to seal joints subject to structural movement against water infiltration . This product may also be used on non-moving joints and requires no job-site mixing. Applied, it has an amazing 12,000 PSI.

Applications – Tilt-Up Panels

– Cold Joints

– Plaza Decks

– Window Glazing

– Curtain Wall Panels

– Moving Joints

– Non-moving Joints

– and more


• RC850 • Rust converter • Watch rust revert back to

steel before your eyes in seconds

• Kills rust, not just coat it • Eco-friendly • Easy one-step application • No V.O.C. • Paintable or seal with

NanoSeal for permanent protection against re-oxidation

CLICK HERE TO SEE VIDEO

http://youtu.be/MfoHYzT87h0


• Liquid Steel

• Overhead bridgework eroded and near to collapse. Using Powerpatch concrete repair system and wrapped with 123,00 psi Liquid Steel, the structure was saved and will last 80-100 years

Before

After

Oil or Gas Pipe Repairs

Support

• Intense two day work shop at ICP HQ in Seattle, WA, USA

• Mingle with global attendees

• Learn about Polycarbon/Polycarbonate quark-nano technologies

• Learn about innovative state-of-the-art remediation techniques for concrete, glass, wood and steel

• Learn about the new ECCO soil stabilization roadway system

• Discover all our “green” attributes

• Hands-on full-scale model work-shops

• Informative Q&A Forums

• One-on-one breakout meetings on personal needs

• First phase of Contractor Authorization process

• Completion Verification Certificate

ICP University

Support

• Webinars-semi-monthly

• Recorded in Library if you miss live webinar

• Topics

– Products

– Product systems

– Admin issues

– Paperwork issues

– Sales Techniques

– And much more…

Continuing Education

ANATOMY OF A PROJECT • Project Submittals to ICP/Proseal

• Detailed Site Survey Form • PhotoLink correlating photos

• ICP Technical Support Team Generates… • Guide Specifications • Guide Sketches • Product Tech Data Sheets • Product MSDS Forms • Other Support Docs

• Field Tech Orders (when apropos) • Warranty (when apropos)

Technical Support

Support

Support

• Projects overseen by Proseal Certified Authorized Master Technicians

• Provides Contractor O-J-T Authorization Certificate for Specific Systems

• Required for warranty substantiation

• Provides Contractor QA and peace-of-mind

• Provides Customer peace-of-mind

Field Project Manufacturers Tech Supprt

Thank you!

Contact Information

Contact: Bob Squirrell, Regional Trade Director, NanolandGlobal Phone: +44 208 144 9597

Cell: + 357 99199973 Fax: +44 870 141 7378

Skype: bobsquirrell

nanotechnology solutions for oil & gas industry

Self Improvement