naredbe: line, circle, rectangle, array, mirror,...
TRANSCRIPT
AutoCADNaredbe:
line, circle, rectangle, array, mirror, hatch
Armando Slaviček
Armando Slaviček 2
Nacrtaj zadani primjer.
Armando Slaviček 3
Command: RECTANGLESpecify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:Specify other corner point or [Area/Dimensions/Rotation]: @100,100
Command: CIRCLESpecify center point for circle or [3P/2P/Ttr (tan tan radius)]:Specify radius of circle or [Diameter] <10.0000>:
Rectangle Circle
Armando Slaviček 4
Line
Command: LINE
Specify first point: tantoSpecify next point or [Undo]: tantoSpecify next point or [Undo]:
Armando Slaviček 5
Hatch
Armando Slaviček 6
ARRAY - ARRAYCLASSIC
Armando Slaviček 7
Rectangular Array
Armando Slaviček 8
Polar Array
ARRAY - ARRAYCLASSIC
Armando Slaviček 9
ARRAY - ARRAYCLASSICPolar Array
Armando Slaviček 10
ARRAY - ARRAYCLASSICPolar Array
Armando Slaviček 11
ARRAY
Command: ARRAYSelect objects: Specify opposite corner: 20 foundSelect objects:Enter array type [Rectangular/PAth/POlar] <Rectangular>: paType = Path Associative = YesSelect path curve:Select grip to edit array or [ASsociative/Method/Base point/Tangent direction/Items/Rows/Levels/Align items/Z direction/eXit]<eXit>: iSpecify the distance between items along path or [Expression] <150>: 120Maximum items = 15Specify number of items or [Fill entire path/Expression] <15>:Select grip to edit array or [ASsociative/Method/Base point/Tangent direction/Items/Rows/Levels/Align items/Z direction/eXit]<eXit>:
Path Array
Armando Slaviček 12
ARRAYPath Array
Command: SPIRAL
MIRROR
Armando Slaviček 13
Zadatak 1. Zadatak 2.
RECTANGLECommand: RECTANGLE
Specify first corner point or [Chamfer/Elevation/Fillet/Thickness/Width]:
Specify other corner point or [Area/Dimensions/Rotation]: @10,10
Armando Slaviček 14
Armando Slaviček 15
MIRROR