As Seen On

Thank you for requesting information about our buildings. We build “Post-Frame” buildings, or “Pole Barns” as they are commonly referred to. We are an established company that has been a leader in this industry for the past 18 years. We have constructed thousands of post-framebuildings and can provide customer referrals, if requested. With our knowledge and experience, we can assure that you will be satisfied with our buildings. We offer a one year warranty on our mate-rial and workmanship at no additional cost, and manufacturer’s limited warranties.

National Barn Company - Central Division, is located in Northeast Oklahoma. The Central Division services Arkansas, Illinois, Iowa, Kansas, Louisiana, Missouri, Nebraska, Oklahoma and Texas.

We are fully insured and guarantee customer satisfaction.

We specialize in all types of post-frame buildings,Hay Barns, Horse Barns, Garages, Storage Buildings, Homes, Implement Sheds,

Riding Arenas, Airplane Hangars, Workshops, Commercial Buildings and more...

National Barn CompanyC E N T R A L D I V I S I O N

1

“Building Solutions.... with Integrity”

5” x 5” CCA treated posts (6” x 6” used on lengths over 20’) set on 10’ centers (8’ or 12’ centers are used on some buildings).

(Standard post depth is 2’6” to 3’0” - Based on level ground)

2” x 6” TreatedBottom Plate. (Bottom Plate can be used as a form for pouring aconcrete slab).

Double 2” x 6” (minimum) Top Plate. 2” x 8” or 2” x 10” used for spans 36’ wide and over.

2” x 4” Wall Girts spaced 24” apart.

2” x 4” Corner Braces.

2” x 4” Roof Purlins spaced 24” apart,laid flat and overlapped approx. 1’.

Factory Engineered Trussesset on 5’ centers. Top Chordand Bottom Chord are typically 2” x 6”. 4’ or 2’ centers are used on some buildings.

V-Braces areused on open walls,sheds and porches.

29 or 26 gauge metal inpainted or galvalume finish, both provided withmanufacturer's limitedwarranty. Ask your sales representative about warranty details.Metal attached with color matching screws.

1 2

34

5

67

8 9

Our Buildings Consist Of...

2

We use only #1 primary, American made metal.

Note:• All lumber is #2 Grade Southern Yellow Pine and/or Douglas Fir (truss bracing may be #3 grade).

Lumber that has ground contact is fully treated. Treated lumber has a lifetime manufacturer’s limited warranty. Lumber can be upgraded for additional cost, or modified to meet local building restrictions.

“LOG ON TO - to view construction photos”

3

We Have The Solutions F

“LOG ON TO - to color your building”

614

21

22

157

8

9 16 25

24

23

31

32

33

34

17

27

18

19

28

29

3020

26

1 10

11

2

3

4

12

135

or Your Custom Buildings.

4“LOG ON TO - to view more building photos”

69

615243

42

68

6051

67

595041

39

48

4940

57

65

66

58

38

47

37

46

55

63

64

56

35

44

45

36

53

62

54

18 10

14

7 3 1

Select the Options That Fit Your Needs

5Polycarbonate panel with 10 year limited war-ranty. 6' exposed on roof or 3' exposed on walls.

“SolarGuard” high-performance reflec-tive insulation• 1/4” fiberglass core bonded to an

exterior layer of 99% pure aluminum and an interior layer of durable rein-forced white facing

• R-Values are approximately +-R11

“Double/Bubble” reflective insulation• 2 layers of air bubbles with a foil reflective exterior

layer and a white interior layer• R-Values are approximately +-R4

• 10' low profile• Ideal for attic

ventilation• Bird proof• Many colors

• 3' x 3' vent• 29 gauge steel• 29" steel weathervane• Many colors available• Also available in 2' x 2'

or 4' x 4'• Weathervanes: Rooster,

Eagle, Horse, Cow, Pig, Deer (may also bepurchased separately)

• 3' x 3' w/metal cladding

• Crossbuck design

• Latchinghardware

• Custom sizes available

• Pre-hung door with keyed lockset (white only)• Standard Size - 3'x 6'8"• Economy, Utility or Heavy Duty• Available with 22" x 36" glass

(with or without divided lite)• Custom doors are available

• Single-Hung VinylWindow w/5/8" insulatedglass

• Standard sizes:2'x3', 3'x3', 3'x4', 3'x5'(divided lite is standard)

• Standard color is white• Custom windows are

available

Manufactured by Atrium, Inc.

• Moisture and Insect protection

• Uplift protection

• Lifetime warranty

• Continuous venting

• Environmentally safe

• Add value to your building

• Metal Soffit Panel w/Ventilation

• Metal Fascia Trim

• Standard size is 12" (also available in 18" or 24")

• Many colors to choose from

Steel Frame• 16 gauge steel frame• ¾” plywood core w/29

gauge metal• Interior side has a metal

skinWood Frame• Wood frame• 5/8” plywood core w/29

gauge metal• Interior side is plywood

• 10' or 12' front w/grill

• 4' sliding door w/grill

• Powder coated fin-ish (many colors)

• Dividers with grills on solid wood

• Swing-out feeders anddrop down panels are available

Manufactured by Rockin-J Horse Stalls

• 24" x 30" steel louver with screen• Standard color is white

1. WALK DOOR 2. INSULATION 3. WINDOWS

4. POST PROTECTOR 6. CUPOLA

7. DUTCH DOOR 8. DUTCH WINDOW / BALE DOOR 9. HORSE STALLS

10. RIDGE VENT 11. GABLE VENT 12. SKYLIGHTS

622

21

5. SOFFIT & FASCIA

“LOG ON TO - for more information”

6

Typical width; 10' or 12'(cannot exceed 12' wide)

Typical width; 12', 14', 15', 20'(width of door is limited by width of building)

Roll-Up Doors• Typical width is 10’ or 12’• Typical height is 8’ or 10’• White is standard• Non-Insulated• Chain-Hoist

Overhead Doors• Typical width 10’, 12’ or 16’• Typical height is 2’ to 3’ less

than the wall height• Insulated and Non-Insulated• Several styles and options

to choose from• White is standard. Other

colors are available

21. WAINSCOTING - Bottom 3' of wall metal different color

22. COVERED V-BRACES - Metal trim over wooden V-Braces

23. CLOSURE VENT - Vented foam strips under ridge cap

24. RAT GUARD - Metal trim to close the ribs at the bottomof the wall

25. RIDGE LIGHTS - 2' polycarbonate ridge cap

26. EXHAUST FAN - Automatic back draft damper and adjustable thermostat. w/18" x 18" louver. (electric by others)

27. TACK ROOMS/FEED ROOMS - Interior room, typical size10' x 10', 12' x 12'. Metal or 2" x 6" wood walls.Available with or without wood decking across top

NOTE: • Door clearance is 1' lower than wall height• Steel vertical rails are standard• Track and rollers as manufactured by National Hardware• Doors latch from the inside

• Color matches the walls, unless requested otherwise• Wheel at bottom of wall for easy sliding• Split slider has interlocking steel meeting rail and center latch• Bottom door track is not standard, but available at additional cost

NOTE: • Height is limited by the clearance needed for the housing or track - typical clearance is 2', therefore the door height is 2' lower than the wall height• If you are pouring a concrete slab you must allow for the thickness of the concrete under the door• Check with your door supplier to verify the rough opening size and required clearance

Typical width; 10', 12' or 16'. Openings are framed and trimmed for an overhead door.(door by others) Angled corners are optional.

Open on side & ends. Open on side. Closed on ends. Roof extended on gable (end wall).

13. SINGLE SLIDER 14. SPLIT SLIDER 15. SLIDER W/CROSSBUCKS

16. ROLL-UP DOORS / OVERHEAD DOORS 17. FRAME-OUT FOR OVERHEAD DOOR

18. PORCH 19. SHED 20. ROOF OVERHANG

ADDITIONAL OPTIONS:

NOTE: • Metal ceilings are not included with these options unless noted otherwise on the contract• Drop porches/sheds are also available (see building on top of page 5 for example)

Sliding doors are available with crossbuck design. Plywood backing with flat metal back-ground - 1" x 4" crossbucks with metal trim.

“LOG ON TO - for more information”

23 24

26 27

Manufactured by CLOPAY

NATIONAL BARN COMPANY ★ CENTRAL DIVISION

Customer must have a level building site prior to delivery of materials. (No more than 10” from level). Customer must have electricity or generator at the building site. Review our “Terms & Conditions” for possible additional charges due to difficult digging conditions.

Customer is responsible for obtaining a building permit, if applicable, and notifying us of any building restrictions that vary from our standard construction methods. Blue prints are available for submittal. Engineered drawings are available at additional cost.

Customer can have a concrete slab poured inside thebuilding once the construction is completed. The 2” x 6” treated bottom plate can be used as a form. In some locationsNational Barn can provide the finished concrete slab. Concrete slabs can be poured prior to construction, but require a footing and anchor bolts embedded in the concrete. A layout for the bolt locations can be provided.

Payment for building may be made by cashier’s check, money order or any major credit card. Half of the contract amount is due upon delivery of the materials. The balance is due upon completion of the building. Complete payment for a material kit is due upon delivery (a 10% down payment may be required).

We are a Better Business Bureau Accredited Business, a member of the National Frame Building Association, and an Accredited Builder with the NFBA.

Visit our web site, www.nationalbarn.com. You can request an estimate, view photos, get answers to frequently asked questions, and design your building.

GENERAL INFORMATION

7