national educational programme: dut (university technology ... · iv. diploma. the dut (university...

129
National Educational Programme: DUT (University Technology Diploma) in Mechanical and Production Engineering Course Presentation

Upload: others

Post on 18-Jul-2020

12 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

�����������������������

National Educational Programme: DUT (University Technology Diploma) in Mechanical and Production Engineering

Course Presentation

Page 2: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

������

I. GENERAL CONCEPT OF THE COURSE A graduate from a University Technology Institute’s Mechanical and Production Engineering (MAP) department is a mechanical engineer, with a solid background in mechanics.

The Mechanical and Production Engineering departments were created in 1967. A number of representative surveys conducted among holders of a DUT in Mechanical and Production Engineering and employers show that:

•� Graduates have entered particularly varied professions in a wide range of activity sectors, •� They have had to adapt quickly and efficiently to their chosen profession, •� In most cases, they have evolved towards senior positions, •� A significant number of them continued their studies immediately after obtaining their DUT, •� A very large majority of them have attended training courses throughout their career in

order to follow technological innovations and changes and to evolve in their career. Based on these findings and forthcoming changes, it has seemed appropriate to structure the course around “professional competencies” and to set up four Course Units that each meets a specific general objective. Technical competencies must necessarily be based on solid scientific foundations. Course Unit 1 (CU 1) develops a range of scientific tools necessary for the acquisition of technical competencies. Furthermore, CU 1 also aims to train students in structured and methodical reasoning. Teaching practices must develop analytical and conceptual minds with the aim of developing adaptation skills. Course Unit 2 (CU 2) groups the technical courses covering professional competencies. Course Unit 3 (CU 3) groups courses allowing the student to understand the industrial world and its environment. These courses develop the concepts of integration in the working environment. Furthermore, they also develop a sense of communication and organisation in the managerial sense. Course Unit 4 (CU 4) provides progressive simulation opportunities as close as possible to industrial reality. It includes a range of synthesis activities involving all acquired competencies and develops the student’s sense of independence in a corporate environment via an industrial work placement.

Within the LMD (Bachelors, Masters, PhD) framework, the DUT in Mechanical and Production Engineering has been organised into semesters and structured in Course Units and modules.

II. PURPOSE OF THE COURSE The holder of a DUT in Mechanical and Production Engineering (MAP) is a mechanical generalist. His technical, scientific, economic and human sciences education allows him to:

•� Exercise his activity in any economic sector (aeronautics, cars, household appliances, sport and leisure, transport, the environment, energetics...),

•� Work together with the various company players, •� Contribute to the competitiveness of companies in all of the stages of a product’s life by

optimising the technical, scientific, economic and human choices and integrating the quality, maintenance and safety requirements,

•� Pursue his career path based on his Personal and Professional Project. The holder of a DUT in the speciality of Mechanical and Production Engineering is able to participate in the stages leading from the expression of need to the product itself: • Analysing, • Modelling, • Designing, • Organising and communicating, • Producing, • Validating.

His training allows him to conduct technological watch and innovative solution research activities.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 3: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

The holder of a DUT in Mechanical and Production Engineering can integrate specialised or multiskilled teams in industrial divisions and departments: •� Research and tooling departments, • Methods and industrialisation, •� Maintenance and supervision, •� Production organisation and management, • Production, •� Quality assurance and control, •� Tests, R&D (research and development), • Research laboratories, •� Purchasing, sales and after-sales...

III. CONDITIONS OF ADMISSION. Candidates meeting the conditions defined in the 12 November 1984 decree on University Technology Institutes may be admitted for full-time education on the admission committee’s recommendation. Candidates involved or not in working life may be admitted for continuing education on the admission committee’s recommendation, after validation of their studies and professional and/or personal experience.

IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma worth 120 ECTS credits or 30 credits for each validated semester. A certain flexibility remains possible with regard to adaptation to the environment, on the University Technology Institute’s initiative and on the advice of the University Technology Institute Committee and the Studies and Academic Life Committee. This adaptation to the economic environment, calculated and based on a total hour requirement of 1800 hours, must however not exceed 10% in volume for initial education and 20% for continuing education.

The modalities for assessment of knowledge and skills are determined in accordance with the provisions set forth in the decree on university technology diplomas within the “European Higher Education Area”.

V. ORGANISATION OF STUDIES. The DUT is a four-semester course. The individual courses are grouped in 4 Course Units consisting of several modules for each of the semesters. A module is characterised by:

1. A definition indicating the spirit in which the course must be approached, 2. An hour requirement broken down into lectures / tutorials / practicals, 3. Specific objectives expressed in terms of competencies. For each objective, the level to be attained is indicated on an “informing, understanding, mastering” scale.

• At the “informing” level, the student must know about the existence of a scientific tool, the general principles of a method and the general characteristics of a process or procedure. He must also be able to find complementary information that he may need.

• At the “understanding” level, the student must know the relevant terms, language and physical principles. He must also be able to dialogue with a specialist in the field.

• At the “mastering” level, the student must know how to choose and use the necessary tools, solve problems and implement a method and a process. He must be able to analyse an experience and a process using scientific data or technical elements. He must also be able to analyse, provide critical appraisal and propose solutions or improvements.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 4: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��� 4. Pre-requisites, i.e. knowledge and know-how necessary in order to benefit from the module in question, 5. Contents (or programme) indicating the topics dealt with, 6. Teaching recommendations, 7. Resource materials, necessary software, recommended documents and Web sites.

The course summaries describe the professional objectives to be achieved and define the module programmes (cf. example of course summary provided in the appendix).

Recommendations: Know-how is assessed and validated based on observable performances. These performances include those demonstrated during the activities that a student must have successfully completed in order to be considered as having acquired the module-specific competencies (to the degree specified in the level scale).

The concept of “supplier modules / customer modules” must be the underlying theme of the course: module transversality and collaborative work between academic staff must guarantee coherence of the Mechanical and Production Engineering course. Certain courses are therefore common to two modules.

Each course summary does not necessarily refer to a single module. In this case, the course unit may be taught by lecturers/tutors from different specialities who must ensure course coherence.

VI. COURSE TEACHING. There are no options available in the Mechanical and Production Engineering specialisation. A maximum of 10% of the course’s total hour requirement (1800 hours) may be devoted to adaptation to the environment (if necessary), especially in relation to the local industry.

The National Educational Programme is comprised of core competencies representing 85% of the total contact hour requirement and a range of differentiated modules representing 15% of the total hour requirement that are chosen according to the student’s Personal and Professional Project. The course path leading to a DUT consists of a major guaranteeing the DUT core competencies, and complementary modules. The complementary modules are intended to complete the student’s course path, whether he favours professional integration or intends to continue his studies with other higher education courses. For students continuing their studies, the complementary modules are aimed at the continuation of studies to certification level 2 or certification level 1. In either case, the required complementary skills concern development of technological knowledge, consolidation of professional competencies and scientific opening. Whatever course track the student chooses, the complementary modules are an integral part of the university technology diploma. Complementary modules intended to favour further studies are proposed to students who are able and wish to follow them as part of adaptation of their course path to their personal and professional project. Designed by University Technology Institutes (IUTs) based on the recommendations of national educational commissions, they present the same characteristics in terms of hour requirements and continuous assessment coefficients as modules aimed at immediate professional integration. The diploma awarded at the end of the 4 semesters will be a DUT in Mechanical and Production Engineering, whatever the student’s orientation.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 5: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��N.B.: - The course summaries are identified by a number (e.g. F111). The first number corresponds to the semester, the second to the Course Unit and the third is an index within the module. - In certain cases, this number is assigned a numerical index (e.g. F413.1 and F413.2). This identification means that the F413 course summary is common to two modules (e.g. F413.1 deals with a part of the problems in their Strain and stress aspects and F413.2 deals with the same problems in their Mechanics aspects). This numbering thus highlights the complementarity of the course units and their transversal and multidisciplinary aspects. - In certain cases, the course summary identification numbers are assigned a letter index (e.g. F412a and F412b). This identification means that a part of the course (part “a”) belongs to the core competencies and the other part (“part “b”) is available for any adaptations that may be useful for course tracks aimed at direct professional integration.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 6: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��A. “Direct Professional Integration” track.

The applicable teaching programme is defined in accordance with Table 1 set out below.

��������

�SCIENTIFIC EDUCATION CU 1

Module Semester 1 CU 1.1

Semester 2 CU 2.1

Semester 3 CU 3.1

Semester 4 CU 4.1

Mathematics and Statistics F111 F115 F211 F212 F311 F411 Strain and stress (SD)

F112 F213 F312 F412a F412b F413.1

Mechanics F113 F214 F215 F313 F314 F413.2 Material Sciences (MS) F114 F216 F217 F315 Computing F116 F317

TECHNOLOGICAL EDUCATION 2 Semester 1

CU 1.2 Semester 2

CU 2.2 Semester 3

CU 3.2 Semester 4

CU 4.2 Mechanical Engineering in Product Design

F121 F122 F221 F222 F321 F322 F323

F421.1 F422

Production F123.2 F125 F224 F225 F325 F424 Methods F123.1 F124 F223 F324 F421.2 F423 Metrology F126 F226 Electricity, Electronics and Automation

F127 F128 F227 F228 F326a F326b F327

F425

GENERAL AND MANAGERIAL TRAINING CU 3

Module Semester 1 CU 1.3

Semester 2 CU 2.3

Semester 3 CU 3.3

Semester 4 CU 4.3

Communication F131 F231 F331 F431a F431b Foreign languages F132 F232 F332 F432a F432b Personal and Professional Project

F134 F234

Management F233 F333 F334a F334b

F433

Adaptation F135

SYNTHESIS ACTIVITIES CU 4

Module Semester 1 CU 1.4

Semester 2 CU 2.4

Semester 3 CU 3.4

Semester 4 CU 4.4

Project F141 F241 F341 F441 Work Placement F442

The course programme thus defined represents 1800 contact hours, 300 hours of synthesis activities (Projects) and 10 weeks of industrial work placement (see Course Unit 4, page 15).

N.B.: The individual courses indicated in normal characters (e.g.: F111) form the course’s core competencies. The individual courses indicated in bold, underlined italic characters (e.g.: F411 ) are courses specific to the “direct profession integration” track. ©�Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 7: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�� B. Student integration in Mechanical and Production Engineering departments. In Semester 1, an adaptation module allows academic staff to take account of the presence of students from various Baccalauréat series. It provides scientific Baccalauréat holders with basic technical knowledge and consolidates the scientific knowledge of technological Baccalauréat holders. It aims to reduce the failure rate that could be observed in the first weeks of the course.

C. The Personal and Professional Project In Semester 1, a specific module allows the student to discover various professions from the manufacturing sector with a view to elaborating his Personal and Professional Project. He must be able to differentiate the moral, intellectual, social and economic characteristics specific to the listed professions. He must also know the supply and demand for these professions and their probable evolution. He must know in particular the professions that he can access:

•� After obtaining a DUT in Mechanical and Production Engineering, •� After pursuing level 2 studies, •� After pursuing level 1 studies.

In Semester 2, a specific module allows the student to make use of self-assessment tools and methods to analyse his personal characteristics; he must be able to check his appropriateness for the considered profession with the help of an academic tutor. After this analysis, he can elaborate his Personal and Professional Project with the help of the tutor so that he can choose one of the proposed course tracks at the end of Semester 2.

D. Learning Differently. Sociological, technical and technological developments lead the Mechanical and Production Engineering departments to integrate the corresponding adaptation needs into teaching relations.

In order to lead students towards greater independence in both their immediate professional activity and their adaptation skills, academic staff is devoted to providing them with methods for: working time management, choosing priorities, simultaneous management of several tasks, personal learning, schedule preparation, project management... Regarding more particularly personal learning methods, Information and Communication Technologies for Teaching (ICTT) are widely used for “traditional” courses and extension courses. In each module, academic staff provides students with access to the various available resources: educational software, tutorials, on-line component research and calculation... allow students to complete their knowledge with a view to attaining periodically-defined, adjusted and regularly-controlled objectives.

As an example, you can consult the course summaries for each module, an example of which is provided in the appendix. Generally speaking, the teaching methods must encourage students to undertake individual work, especially:

•� During projects, •� By encouraging personal research using modern media, •� By favouring and developing the use of public-access rooms for access to on-line

courses, etc. •� By establishing partnerships with software providers in order to make available to

each student a personal right of use allowing them to work in complete independence.

©�Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 8: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�� E. Professional Integration In Semester 3, professional integration is addressed in the Communication module. This course can be directly applied to personal research for a work placement, which must precede job research (CV, initial contact, interview). F. Training In and By The Company. Training takes two forms:

•� Tutored projects. It is strongly recommended that the topics of Semester 3 and 4 projects are provided by the companies. The group of students in charge of a product must apply the analysis, collective organisation and meeting coordination methods to concrete industrial cases. The projects are thus supervised and assessed jointly by an industrial tutor and an academic tutor. The choice of projects is of particular importance: the selected projects must not be too ambitious to be completed successfully but must however be a real synthesis of the courses offered.

•� The industrial work placement. It must be the most valued way of discovering the business world and its realities. The company chosen by the student for his work placement is checked so that the work placement is also a source of complementary training and improvement.

G. Practical Information. The tutorials are organised in groups of a maximum of 26 students. The size of groups for practicals is half that of tutorial groups. However, certain practicals may involve smaller groups (8) for safety reasons (especially in production).

©�Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 9: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

VII. COURSE OBJECTIVES

A. Course Unit 1 (CU 1)

Module: Mathematics and Statistics: The Mechanical and Production Engineering mathematics programme effectively implements mathematical tools in order to attain the competencies required in the User modules. Its main objective is therefore to provide the student with mastery of mathematical tools useful in his technical and scientific education. The mathematics programme is also an important element of general knowledge and must allow the development of logical and rigorous reasoning.

S1 F111 Derivatives and Differentials S1 F115 Statistics and Probabilities S2 F211 Integral calculus S2 F212 Functions with several variables S3 F311 Matrix calculus S4 F411 Curves

Module: Strain and stress (SD):

Students with a DUT in Mechanical and Production Engineering can work in any economic sector; at the end of the second year, their acquired competencies allow them to:

•� Understand and perform dimensioning or rigidity or strength control calculations, •� Perform deformation measurements (linear elasticity problems in statics), •� Perform calculations in a company:

o In the research department: they will be simple and processed analytically or with the help of computer-based utilities for more complex cases,

o In the calculations department: static analysis of linear elasticity on classical codes,

o For a part or a simple structure: numerical and experimental methods for determining stresses (with a critical approach to modelling) and results.

Strain and stress is not only based on this module and takes account of other factors such as implementation, design technology; the importance of economics in the choice of materials, products and technologies... It is therefore essential that a connection is made between the courses in the various supplier modules (materials...) and the customer modules (design, implementation...). Mechanical Engineering in Product Design will have a federative role in this context.

S1 F112 Theories of material strength and simple stresses S2 F213 Simple stresses: twisting and bending S3 F312 States of stress and composite stresses S4 F412a

and b Energy methods and finite element modelling

S4 F413.1 Research department: mechanical dimensioning aspect

Module: Mechanics: Students with a DUT in Mechanical and Production Engineering can work in any economic sector. At the end of their second year, their acquired competencies allow them to:

•� Develop a structured approach and a solving strategy adapted to the case in hand, •� Understand and perform mechanical calculations in preparation for system

verification or dimensioning problems, •� Perform these calculations in a company, particularly in the research department:

they will be simple and processed graphically, analytically or with the help of computer-based utilities for more complex cases,

•� Use mechanical simulation software in a structured way.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 10: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

Mechanics is a module related to Mechanical Engineering in Product Design and Strain and stress.

S1 F113 Statics of solids S2 F214 Kinematics S2 F215 Kinetics S3 F313 Dynamics S3 F314 Energetics S4 F413.2 Research department: Dimensioning and Mechanics aspects

Module: Material Sciences (MS): Students with a DUT in Mechanical and Production Engineering can work in any economic sector. At the end of their second year, their acquired competencies allow them to:

•� Know the main properties and characteristics useful for choosing and implementing materials,

•� Understand the behaviour of materials, distinguish the various classes and their designations,

•� Situate iron alloys and light alloys in relation to the transformations that control their microstructures, their elastic and breaking behaviour as well as their adaptation to the implementation conditions,

•� Widen the choice of materials (metal alloys, plastics, composites...) for product design, based on a panoramic view of materials. They will have to make a choice based on the materials’ technical and economic properties and their shaping processes.

•� Define “materials” specifications from which they can select adapted materials. As the choice of materials takes account of various factors (implementation, mechanical engineering in product design, costs...), a necessary connection will be made with the corresponding modules.

S1 F114 Material properties S2 F216 Metal materials S2 F217 Non-metal materials S3 F315 Material selection criteria

Module: Computing: Students with a DUT in Mechanical and Production Engineering use computers for the most varied applications. Their acquired competencies allow them to:

•� Organise their workspace and navigate in networks, •� Analyse a problem and create a simple application in a structured language, • Use a spreadsheet, �� Understand the organisation of a database and handle information.

S1 F116 General computing S3 F317 Databases

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 11: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�B. Course Unit 2 (CU 2)

Module: Mechanical Engineering in Product Design

The research department is the point of convergence of numerous players, professions and modules. In this context of dialogue, complementarity and interactivity, students with a DUT in Mechanical and Production Engineering must have acquired the competencies allowing them to:

•� Study specifications and participate in their development, •� Conduct a value analysis study, •� Perform component pre-dimensioning calculations (manually or with a computer), •� Make a note of (pre-dimensioning and validation) calculations, •� Use the main modules in a 3D modeller (simulation of mechanism behaviour,

layout...), •� Perform dimensioning and dimensional and geometric tolerancing, •� Write operating instructions, •� Participate in the innovation and technological watch procedure.

Furthermore, within a research department, a DUT graduate must be able to work in a team, organise his own time and use project management tools.

S1 F121 Mechanical engineering tools and languages S1 F122 Product design: analysis and design techniques S2 F221 Product definition S2 F222 Construction and industrial applications S3 F321 From the specifications to constructive solutions S3 F322 From the specifications to industrial mechanical systems

engineering S3 F323 Choosing constructive solutions S4 F421.1 Study in a digital chain context S4 F422 Mechanical engineering in product design: studies and

developments

Module: Production Students with a DUT in Mechanical and Production Engineering must know a large range of production means, the physical phenomena they produce, their performances and limits, and their specific constraints. At the end of the course, their acquired competencies allow them to:

•� Know the fields of use of the various production processes for metal and non-metal parts, •� Analyse productions from conventional machines and optimise the production parameters, •� Implement non-conventional machines and know the influence parameters, •� Write a program in ISO language and implement numerically-controlled machines, •� Use CAM software, •� Implement a workstation in view of mass production (adjustments, controls, validation, and

production launch). Except in the case of highly complex machines, holders of a DUT in Mechanical and Production Engineering Engineering are not intended to be operators.

S1 F123.2 Product production processes S1 F125 Production on conventional machines S2 F224 Implementation of production means S2 F225 Implementation of a simple machining cell S3 F325 Computer-Assisted Manufacturing S4 F424 Mass industrialisation

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 12: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

�Module: Methods

Students with a DUT in Mechanical and Production Engineering must be able to integrate a methods department.

In this context, at the end of their studies, they must have acquired the competencies allowing them to:

•� Know the various production processes and their characteristics, •� Analyse and interpret specifications and the constraints derived from product definition in

view of performing manufacturing dimensioning, •� Define a production process and a pilot project for a procedure with evaluation of means, •� Choose the production, mounting and assembly means depending on the product

characteristics on the one hand, and on the company’s internal or external production means on the other. This choice integrates the quality, cost and deadline constraints,

•� Determine the chronology of the manufacturing phases, •� Complete a phase sheet and optimise the manufacturing parameters, •� Propose modifications to the research department, •� Create equipment for improving productivity, •� Create an investment and profitability portfolio for equipment.

The diversity of production means is such that a part of this module will involve external participants, visits to companies and specialist fairs, and use of multimedia resources.

S1 F123.1 Product production processes S1 F124 Introduction to manufacturing processes S2 F223 From product definition to the process S3 F324 Phase study and simulation S4 F423 Industrialisation. Complex processes S4 F421.2 Study in a Digital Chain context

Module: Metrology At the end of the course, students with a DUT in Mechanical and Production Engineering must have acquired the competencies allowing them to:

•� Identify and interpret the specifications of a definition drawing in view of control, •� Define a measurement procedure, •� Interpret a measuring report, •� Choose and use various measurement means (for measuring shape, size and surface

roughness), •� Implement three-dimensional measuring machines, •� Implement control-related statistical methods,

The metrology programme will mainly be based on the statistics course.

S1 F126 Measurements and control S2 F226 Metrology

Module: Electricity, Electronics and Automation Students with a DUT in Mechanical and Production Engineering are involved in designing, maintaining and using complete mechanical systems. They therefore intervene on so-called “mechatronic” systems, mainly in automated production systems comprised of an association of mechanical, electric, electronic and computerised components.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 13: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

Power and control electronics components are considered as market sub-components: DUT students do not have to design them but they must define them and know the use that they can make of them. They must be able to configure them, program them and integrate them into a system. Students must have the competencies allowing them to:

•� Choose a motorization or an actuator, •� Choose and integrate a standard control or instrumentation component and dialogue

with automation specialists, •� Take account of environment constraints caused by the presence of electrical

equipment, •� Conduct a simulation of a sensor compatible with reliable operation, •� For the automation function, identify the needs, perform implementation in simple cases and

collaborate with specialists in complex cases. �� Propose a solution for the automation of a workstation or production workstation by

integrating man/machine dialogue functions for use and maintenance. S1 F127 Basics of electricity S1 F128 Basics of automation S2 F227 Electric motorization S2 F228. Automation of a workstation. Safety S3 F327 Distributed automated systems S3 F326a

and b Electronics for automation and instrumentation

S4 F425 Automation of a continuous digital system

C. Course Unit 3 (CU 3)

Module: Communication Communication is a course within the Mechanical and Production Engineering course programme that meets the integration needs of future technicians in professional, social, cultural and human environments. This course guarantees evolution towards senior managerial positions. It is a transversal module that provides methodologies necessary in all other subjects. It is therefore one of the “supplier” modules for all of the other courses. It has, in particular, privileged links with certain courses and certain activities (chronological, parallel and complementary work): Personal and Professional Project, Introduction to Economics and Social Science, Foreign Languages, Work Placements and Projects. However, this course is based on specific contents, and trains students to be both critical receivers and active producers of sense and information.

At the end of the fourth semester, students with a DUT in Mechanical and Production Engineering must have acquired the competencies allowing them to:

•� Research and use documentation, •� Make oral presentations with current materials, •� Produce professional and academic documents, •� Actively participate in collaborative work in a company, •� Write a CV and attend a job interview.

S1 F131 Fundamental elements of communication S2 F231 Document production S3 F331 Professional integration S4 F431a / b Business communication

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 14: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

Module: Foreign languages Foreign language teaching aims, on the one hand, to provide students with an instrument for professional and general communication whose use has become essential due to the internationalisation of relations and, on the other, to promote awareness of intercultural communication.

Students with a DUT in Mechanical and Production Engineering must have acquired the competencies allowing them to:

•� Develop good interpersonal socialization skills, whether for face-to-face, telephone or written contact.

•� Communicate in a professional context in the field of employment (CVs, covering letters, job interview) and in the business world (internal memos, summaries, speaking in public)

•� Master technical English in order to integrate an English-speaking team: basic technical vocabulary, description and localization, writing of instructions, description of forces and mechanisms; comprehension, reports and writing of technical texts.

S1 F132 Foreign language (general and professional): Basics S2 F232 Foreign language (technical): Research and Data Transmission S3 F332 Foreign language (technical and professional): Writing and Informing S4 F432a and b Foreign language: Professional and Intercultural Integration

The language skills must correspond to level 1 of the CLES (Higher Education Language Proficiency Certificate).

Module: Personal and Professional Project In Semester 1, students are trained to situate themselves in relation to their cultural, technical, scientific and social environment. They discover the professions related to mechanics and production (Maintenance, Production management, Control, Quality...) from case studies. They must be able to self-assess themselves in order to construct their Personal and Professional Project (PPP) in the mechanics field or choose a related profession. The topics dealt with in the first-semester project (F141) complement the PPP-specific module.

S1 F134 Techniques and professions associated with a product’s life cycle S2 F234 The Student's Personal and Professional Project

Module: Management At the end of the course, students must have acquired the competencies allowing them to:

•� Organise and manage a project, •� Evaluate the flow and progression of a project within a company using specific tools, •� Integrate a production management department. They must understand its organisation

and the production management models and know how to use production management tools,

•� Integrate a Quality department. They must thus understand the quality issues and actively participate in the company’s Quality procedure,

•� Understand and identify Maintenance problems. They must understand the consequences of defects and their influence on Quality and Production Organisation.

These concepts should be considered within the general business context and students must know the structure of a company, its general architecture and its legal, social, economic and human environment. They must be able to situate the company in a broader context extended to national and European levels.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 15: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

S2 F233 Project Coordination and Management S3 F333 Production Management S3 F334 a

and b Quality and Maintenance

S4 F433 Introduction to Economics and Social Science

Module: Adaptation Students integrating Mechanical and Production Engineering departments come from various origins. It thus seems necessary to harmonise their knowledge. This module is essentially oriented to providing industrial technology Baccalauréat holders a scientific refresher course and scientific Baccalauréat holders an introduction to technology.

S1 F135 Adaptation and harmonisation of basic knowledge

D. Course Unit 4 (CU 4)

The aims of this Course Unit are:

•� Developing personal (scientific and technical) knowledge acquisition skills and independence guaranteeing the further development of Mechanical and Production Engineering technicians,

•� Allowing the integration of various (managerial, scientific and technical) courses in technical topics related to the Mechanical and Production Engineering speciality, in association with group work learning,

•� Developing communication techniques

Module: Projects Tutored projects allow students to develop their know-how and interpersonal skills, in association with the work placement.

The industrial nature of a project is not an objective in itself, but rather a means related to an active and inductive pedagogy guaranteeing the acquisition of methodological approaches, behaviour and attitudes essential for both personal and professional studies.

Great attention should be paid to the scope of the projects proposed to students as, paradoxically, a too ambitious project placing the student in a subordinate position in an approach entirely constructed and guided by the tutor may run counter to the intended purpose.

The projects are used in the course as soon as possible as additional study themes on the one hand and as sources of technological and scientific enrichment on the other. The projects must also allow students to find out about the local industrial fabric, the evolution of professions...

S1 F141 Development of the PPP and presentation of a profession from the manufacturing sector S2 F241 Definition of the stages necessary for developing a system (from the idea to

the end-of-life) S3 F341 Study of a system to be developed, improved, industrialised (topics chosen

according to the student’s planned orientation) S4 F441 Study of a system to be developed, improved, industrialised (topics chosen

according to the student’s planned orientation) �

���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 16: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��Module: Work Placement

The aim of the company work placement is to allow the student to discover the social, economic and technical realities of a company. It allows the student to apply and enhance the knowledge acquired during face-to-face teaching. The work placement lasts a minimum of 10 weeks. It can take place, wholly or partially, in the third and fourth semesters.

A follow-up is conducted by one of the department’s lecturers/tutors via regular contacts with the host company and (at least) one on-site visit wherever possible.

The assessment is based on the work undertaken, the student trainee’s ability to integrate the company, his written report and his oral presentation.

S3 and S4 F442 Industrial work placement

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 17: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

VIII. COURSE SCHEDULE AND COEFFICIENTS. SEMESTERS 1 AND 2

Course Unit Semester 1 Semester 2 L T P Total Coefficients L T P Total Coefficients

CU 1 Mathematics and Statistics 14 28 3 45 2 18 36 6 60 3 Strain and stress 8 18 4 30 2 8 18 4 30 2 Mechanics 6 20 4 30 2 18 38 4 60 3 Material Sciences 9 9 12 30 2 15 14 16 45 2 Computing 5 10 15 30 2

Total 1 42 85 38 165 10 59 106 30 195 10

CU 2 Mechanical Engineering in Product Design 10 10 40 60 3.5 8 12 40 60 3.5 Production 7 10 28 45 2 8 12 40 60 3 Planning 6 16 8 30 2 6 12 12 30 1.5 Metrology 3 4 8 15 1.5 6 8 16 30 1.5 Electricity, Electronics 6 12 12 30 2 11 25 24 60 2.5 and Automation

CU 3

Total 2 32 52 96 180 11 39 69 132 240 12

Communication 0 15 15 30 2 0 15 15 30 2 Foreign languages 0 15 15 30 2 0 15 15 30 2 Personal and Professional Project 9 9 12 30 2 5 10 15 1 Management 10 15 20 45 2 Adaptation 15 15 0 30 2

Total 3 24 54 42 120 8 15 55 50 120 7

CU 4 Synthesis Work and Project 60 1 60 1 Work Placement

Total 4 60 1 60 1

SEMESTER 1 SEMESTER 2 L T P Total Coefficients L T P Total Coefficients

CU 1 42 85 38 165 10 59 106 30 195 10 CU 2 32 52 96 180 11 39 69 132 240 12 CU 3 24 54 42 120 8 15 55 50 120 7

Total contact hours 98 191 176 465 29 113 230 212 555 29

CU 4 Synthesis work and Project 60 60 1 60 60 1

Total Coefficients 30 30 © Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 18: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

������

�SEMESTERS 3 AND 4

Course Unit Semester 3 Semester 4 L T P Total Coefficients L T P Total Coefficients

CU 1

Mathematics 9 18 3 30 2 5 10 0 15 1 Strain and stress 8 18 4 30 2 8 25 12 45 3 Mechanic 7 30 8 45 3 0 7 8 15 1

Materials Science 0 11 4 15 1 Computing 3 4 8 15 1

Total 1 27 81 27 135 9 13 42 20 75 5

CU 2 Mechanical Engineering in Product Design 10 30 50 90 4 0 12.5 40 52.5 3 Production 4 6 20 30 2 0 10 20 30 2 Planning 6 12 12 30 2 6 14.5 32 52.5 3 Electricity, Electronics 10 22 28 60 4 2 4 9 15 1 and Automation

CU 3

Total 2 30 70 110 210 12 8 41 101 150 9

Expression and Communication 0 15 15 30 2 0 10 20 30 2 Foreign languages 0 15 15 30 2 0 15 15 30 2 Management: POM, Quality 14 18 28 60 3 10 20 0 30 2 and Maintenance

Total 3 14 48 58 120 7 10 45 35 90 6

CU 4

Synthesis work and Project 90 90 2 90 90 3 Work Placement 10 weeks 7

Total 4 90 90 2 90 90 10

SEMESTER 3 SEMESTER 4 L T P Total Coefficients L T P Total Coefficients

CU 1 27 81 27 135 9 13 42 20 75 5 CU 2 30 70 110 210 12 8 41 101 150 9 CU 3 14 48 58 120 7 10 45 35 90 6

Total contact hours 71 199 195 465 28 31 128 156 315 20

CU 4: Synthesis activities and Project 90 90 2 90 90 3

Work Placement 7 Total Coefficients 30 30

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 19: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�Global summary.

Total number of coefficients: 29 + 29 + 28 + 20 + 7 (projects) + 7 (work placement) = 120 Total hours: 465 + 555 + 465 + 315 = 1800 hours (course)

1800 hours (course) + 300 hours (project) = 2100 hours + work placement

“Core competency” modules: 1530 hours, i.e. 85% of the total contact hour requirement. Differentiated modules: 270 hours, i.e. 15% of the total contact hour requirement.

TOTAL, Lectures: 313 hours, i.e. 17.5% TOTAL, Tutorials: 748 hours, i.e. 41.5% TOTAL, Practicals: 739 hours, i.e. 41%

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 20: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������

��� ����

����������� ������������� ���������������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'��(��)��*�"�"����

���)��+�������� •� ���������������������������������•� �������������������

•� ����������������

�!� ����������� ��!�"����������

��#� ��!�$���������

�!�$����������������!��%���������������������

��!� ����������������

��,-�$�"#���"���������%�&�#�&�����$��(����$"����

!� �.��/)0�/�1(��%���"��!&"2!�"��3�

&�'������(��)��������*�����������%���"�'������� ����!� "�'� �!����"�'�

���+������)�����������������������������������������������+�'��)�����,� -�

. ����������������������������������������,� -�

�������������������������������������������������������������,� -��

���4������ �����������������

�&!��"�'�

/�������������������������������0����0�������,� ������������������1���������,�2���������������������������

������������������������������0����0�������,�

2��������������������������������������������������0����0�������,�

3����������������+������������������'��#������������������#�)�������������+�����,�

�����������������������������������������0�����������������'��,�

4����+��������������)����������������,� 5��������������������������������������������������#�����������������

���������*���#��������������������������+,�

2��������������������������������������!�����+������������������������+���������������������,�

6�������+������!�0��������������,�

2���������������������������/�"�"�'���������������� ���������� �������������#������������'�������� ��'���� ������������%��������� �����������������$��!�"��������� ,2, ,%,��������,����������������������������������������������������������

��56�������56��

����

���������7��������#�)�����������#���1����������������������������

� � � � � � � � � � � � �� � � � � � � ����56�

2������������ 8���������� ��� ���9!� ����+� �������0��������$�������"� ����"!&� ��&��"���� ��� ��������� ���

�0:����'����������������������(�"#"&�'"�'���$0��&�'"$!&� "#���"�7���������������+���'�����!�

1�;����������������������'��+#�

1�;����������������������#�

1�;���������)���#�

1;�����������������������������������#�

1�;������������0�+�������������,����

�4����!&����!�.��

� � � ����������������856����

��� �� ��

���(�&���7�0����9� :� �8� �5�

•� <�����+����������������������������������)���������������������(�����������'�������0+������������,�

•� $�������������������+�����������8;�����2���+���9,�

•� "��)�����������8�9����������������2$�����)�����������=���������������)���������������80���'������������������#������#����,9�

����������+����,�

��!$0"�'���$����� !�"����

%����������������)��������)�������������������0�����������>��������+�������������+���#����)�����������������������#������������������

���������������������������������������������)����/�"�"�'���������������� ���������� �������������,�&�(�)���#��������������������������

��������)!������������'�������� ��'���� ������������%��������� ��������#�����$��!�"��������� ,2, ,%��������#��������0���(����������

���� ���)� ��������� ���� ������������ �� ���������� ��������,� 5�� ��������� ��� ������ ���������������#� ������� ��� ����� ���'���� ��1������

(��)���������;�����2���+���,�

%����������������'���������������������������������8���� �����������������+9��������0��������������)�������������,��

�(�$"%"$��� !&"�"��;�

������!&�/��."�'��"��9��%����������*�����������������������������������������#�������������������������������(������#�����

�������������0��������������������������+����������������������������������?���������������������'�����������������+,�

�!���"!&���� !� ��2/�)��(������������������������#����������������)������������������������!�������������������������0�����)����

0�����������������#���+�����������������������������������0���������������+,�

�",&"�'�!(079�$�����������������0��(#����������0��(#��+�0����������������#���������������������#�����������:�������#�����������������

:��������8��������5�������������%�����������#�&>@�����A��'����,,,9�

��0��� �$������9���%�/!��<�= �,��"�����

�2/���������#�����1������������B�������#��������������������������������8��������#��/����. �0�����9��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 21: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�������������������

CU 1: SCIENTIFIC EDUCATION

Semesters 1, 2, 3 and 4

1� MATHEMATICS AND STATISTICS

1� STRAIN AND STRESS

1� MECHANICS

1� MATERIAL SCIENCES (MS)

1� COMPUTING

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 22: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����������

�MODULE: Mathematics and Statistics

General objectives to be achieved in mathematics. The Mechanical and Production Engineering mathematics programme effectively implements mathematical tools for use in user disciplines.

The mathematics and statistics programme is also an important element of general knowledge and must allow the development of logical and rigorous reasoning.

Teaching recommendations The courses in this module have been designed together with the speciality’s other scientific and technical disciplines. Particular care has been paid to harmonisation of vocabulary and notations. The examples of applications are essentially chosen from the other disciplines. The student must be able to use mathematical tools in simple cases. General considerations requiring too much abstraction should be avoided.

The practicals will be dedicated to solving all stages of symbolic and numerical calculations in exercises related to the mechanics, strain and stress, electricity... modules. The statistics programme will be applied in the Metrology and Quality Control courses.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 23: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

������

� MATHEMATICS

Summary

No.

Title of course summaries L T P

Derivatives and Differentials 9 18 3

F111 Derivates and differentials, development of a function in the S1 neighbourhood of a point.

Study of hyperbolic and (direct and inverse) trigonometric functions;

Probabilities and Statistics F115 Probabilities and descriptive statistics; sampling, estimations and

hypothesis tests. Integral calculus

F211 Definition of the integral as the limit of a sum; integration methods (by parts, by change of variable);

S2 integral convergence. Functions with several variables, uncertainties

F212 Partial derivatives, differentials, differential forms, maxima of a function; double and triple integrals.

Matrix calculus Fundamentals of vectorial spaces (vectorial operations,

5 10 9 18 3 9 18 3 9 18 3

S3 F311

sub-spaces, bases); matrix operations (addition, multiplication by a real number, product, inversion); reduction of a matrix.

Curves S4 F411 Study and plotting of a parameterized curve or one given by its

polar equation; length, curvature, torsion.

5 10

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 24: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!�� � � � � � � � � ����

�����������9��������������� ����������

����)��+��������

��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

&�'������������������������������������

C��������D����������

�,-�$�"#���"���������%�&�#�&�����$��(����$"����&�'������(��)��������*��������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��������� ����!� "�'��������!����"�'�

�����"��)�����������������#��B�����������������������������������,� �� -�� ��"��)������)��������+�����0���'�������������������������������0������������������,� �� -�� ��

���4������ ������ ��������������0� ��

/���'������������������������������������,� ��?��

%��������������������������������������������,� ��?��

3+���0��������������,� �?��

%�+������������#�����������'���������,� ��?��

&���������+���������������������������0������������������,� �?�

��

�7��������#����(���

����#���1������������

������������������

�� ���������������� ���

���(�&���7�0����9� >� �?� ��

4����!&����!�.�

%������������������������������������������������$��������#� ���������������������4���������+,��

���

��!$0"�'���$����� !�"����

%���)��(������+���������������������������������������C��������D�������������,�E�����������������)����0���'����0������ ���������8������� ��9,�4���������������������=�������)������������������������,�

�2��������������'�������������(��)1��)!�

• /���'����������������#�

• �������������������#�

• /�'���������������������#�

• 2����������������������������������������������������+������+F�8B9����'��8������������+��������0���'����9,������������������������!&�/��."�'��"��9�

�!���"!&���� 9�

�",&"�'�!(079�2���+����0��(������5@%����������

���������������(�$"%"$��� !&"�"����

���

��0��� �$������9���%�/!��<�= �,��"���9� ����������������������)���#�������������,������

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 25: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!�� � � � � � � � � � ��@�

�����������9�����������������������������

����)��+��������

��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

&�'������������������������������������

C��������D���������,�

�,-�$�"#���"���������%�&�#�&�����$��(����$"���&�'������(��)��������*��������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����������� ����!� "�'����!����"�'�

���"��)������)�����������0�0��������������������������������������������#������������+����*�����+��������,� -��

���4������� ��������������������0� ��

/��������'��������������������0�0�������,� ��?��

C����������)#����������),� ��?�

�������#������������������+���������������8��������������������������������!��������������������

��9,�� � � � � � � � � � � ������������ � � � � � ��������?�

7��������#�

)�����������#�

��1��������������

�� ���������������� ���

���(�&���7�0����� @� �5�

4����!&����!�.�

%������������������������������������������������$��������#� ����������������#�4���������+#�$�������+�����G�����+,��

����2��������������'�������������(��)1��)!�

�����!$0"�'���$����� !�"����

��

• E������������������������������������������������������������������#�

• ���+�������������'����0��������)���������������)#�

• 4����������������#���'�������#������*����+#�

• %������������*�����+�����������������*�������,������������������������������!&�/��."�'��"��9�

�!���"!&���� 9�

����������������������(�$"%"$��� !&"�"���

�",&"�'�!(079�6��0�0����+�=������������0��(������5@%����������

��0��� �$������9����%�/!��<�= �,��"���9� ��������������)���#�������������,�����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 26: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�������!��� � � � � � � � � � ����

�����������9����4��������������

����)���+�������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"���

&�'������������������������������������C��������D���������,�

� ��

�&�'������(��)������

������������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� ��*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����������� ����!� "�'� �!����"�'�

����"��)������)������������������������������,� �� -�� ��"��)������)�������'�����������������������*�������,� �� -�� ��

���4������ �����������������

���0� ���

/����������������������������������������������,� �?��

5������������������,� ��?��

H��������������������,� �?��

/�������������*������������������8)����������0���'����0���#�������,,,9,� ��?��

/�������������*�������������������8�������)�������������������������9,� ��?�

�7��������#�)�����������#���1�����������������������������

��

�� �� ��

���(�&���7�0����9� >� �?� ��

4����!&����!�.�

%�����������������������������������������������!�$��������#� ���������������������4���������+,��

���

��!$0"�'���$����� !�"����

%���)��(������+���������������������������������������C��������D�������������,�E�����������������)����0���'����0������ ���������

8������� ��9,�4���������������������=�������)������������������������,�

�2��������������'�������������(��)1��)!�

• 5��������������������#�

• ��'������������������*�������,�

,������������������

�������!&�/��."�'��"��9�

�!���"!&���� 9�

�",&"�'�!(079�2���+����0��(������5@%����������

����������������

�(�$"%"$��� !&"�"����

��

���

��0��� �$������9����%�/!��<�= �,��"���9� ����������������������)���#�������������,�����

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 27: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � � ����

�����������9� �������= ���������������������������)���+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

#� ��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��������� ����!� "�'� �!����"�'�

�����"��)������������������)������'�����'����0���,� �� -�� ��"��)������)��������������������������������,� �� -�� ��

���4������ ������ ��������������0� ��

���������)������'�����'����0���!��������������������������������,� �?��

6�����������'���'��#�������������������������������������������������,� ��?��

/���'����������������������������#����(������������������>���B�����,� ��?��

$�����������������,� ��?�

�7��������#�)�����������#���1�����������������������������

�� �� ��

���(�&���7�0����9� >� �?� ��

4����!&����!�.�

%�����������������������������������������������!�$��������#� ����������������#�4���������+#�2��������������4����������,������2��������������'�������������(��)1��)!�

�����!$0"�'���$����� !�"����

��

• ��������������������������������������'���'���������������#�

• 5������������B����������������������#�

• &��(������������������>���B�����#�• @��������0�����������������������������������������#�'������#���������������'��+�80+������0�+����'���������������#�

�+����������������������������������9,��

���������������������������!&�/��."�'��"��9�

�!���"!&���� 9�

�",&"�'�!(079��2���+����0��(������5@%����������

��������������������(�$"%"$��� !&"�"����

���

��0��� �$������9���%�/!��<�= �,��"���9� ����������������������)���#�������������,��

����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 28: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � � � ����

�����������9����������������������)���+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

6�����������������������������1+����&+�D����������,��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����������� ����!� "�'� �!����"�'�

������"��)��������0��������������B���������,� �� -�� ��

���4������ �����������������

���0� ���

;��������������������#�0����#����������,� ��?��

$����B��������������������,� ��?��

/�������������������������B,� �?��

4B����������������������!��*��������+�����#��������+,,,� ��?�

�7��������#�)�����������#���1���������������������������

��

�� �� ��

���(�&���7�0����9� >� �?� ��

4����!&����!�.�

%�����������������������������������������������!�$������������� ����������������,������2��������������'�������������(��)1��)!�

�����!$0"�'���$����� !�"����

��

• ��)���������������������'��������������������'�����������01�����#�

• ��)���������������������0��������������������������������������������#�

• ����������������������������������������'��������������B#�

• �������������0���#�

• /��������������������B#�

• ��'�������+����������������*�������,����������������������

�������!&�/��."�'��"��9�

�!���"!&���� 9�

����������������������(�$"%"$��� !&"�"����

��",&"�'�!(079�&����������0���0��(�����5@%���������,�

��0��� �$������9���%�/!��<�= �,��"���9� ����������������������)���#�������������,��

����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 29: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�������!��� � � � � � � � � 8���

�����������9�������������)���+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�������

#� �#� ���

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

&�'������(��)���������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����������� ����!� "�'�����!����"�'�

������

��"��)������)�������������������'���������������������������������������������,� �� -�� ��

���4������ �����������������

���0� ��

6��������'��!�������������*�������#��������*������,� ��?��

&��������������'���������,� ��?��

���'�����������������,� ��?�

�7��������#�)������������������1�������������

�� �� ��

���(�&���7�0����9� @� �5�

4����!&����!�.�

%�����������������������������������������������!�$��������#��2/#��2$�����$�������+,������2��������������'�������������(��)1��)!�

�����!$0"�'���$����� !�"����

��

• ���+����������������I������'��)���������+��������#��������������������������������������0�������#�

• ���+���������'����'���0+������������*������#�

• �������������������������������'�#�• ����������������������������������'���������������������'�,�

��

�������������������������������!&�/��."�'��"��9�

�!���"!&���� 9�

����������������������

��(�$"%"$��� !&"�"���

�",&"�'�!(079�/�������������������+�0��(������5@%���������,��

��0��� �$������9���%�/!��<�= �,��"���9������������������������)���#�������������,�����

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 30: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�MODULE: Strain and stress

General objectives to be achieved in Strain and stress. Students with a DUT in Mechanical and Production Engineering can work in any economic sector and, at the end of their second year, must be able to:

•� Understand and perform dimensioning or rigidity/strength control calculations as well as deformation measurements (linear elasticity problems in statics).

•� Perform calculations in a company: o In the research department: they are simple and processed analytically or with the

help of computer-based utilities for more complex cases, o In the calculations department: static analysis of linear elasticity on classical codes, o On a part or a simple structure: use and develop numerical and experimental

methods for determining stresses (with a critical approach to modelling) and results.

General remark. Strain and stress is not only based on this discipline and takes account of other factors such as implementation, design technology, the economic aspect of materials, products and technologies, etc. It is therefore essential that a connection is made between the courses offered in the various supplier modules (materials, etc.) and user modules (design, production, etc.).

Teaching recommendations The course must:

•� Lay the foundations for analysing the effects of mechanical stresses: engineering science tools,

•� Implement practical methods applicable in a research department, after theoretical study: numerical or other methods,

•� Be illustrated by real examples, with a modelling part, in order to introduce stress and deformation calculation methods and favour the analysis of estimations. Modelling of real cases and analysis of results are the two main working phases in companies.

The use of digital tools is essential and can be covered in tutorials and/or practicals. The use of software must be studied with a simple theoretical approach to allow students to step back from modelling and results. It can, in particular, allow them to check adherence to hypotheses for small deformations as well as to dimension “non-simplistic” structures and study the influence of modelling on the obtained results.

Students must be introduced to the 3 phases of a study: modelling, manual or digital calculation and results analysis. Critical thinking developed in this discipline is important for further studies or professional integration.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 31: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�������

STRAIN AND STRESS

Summary No. Title of course summaries L T P

F112 S1

Theories of material strength and simple

stresses Introduction to dimensioning tools with method implementation (theories, modelling, calculation, results analysis).

8 18 4

Simple stresses: twisting and bending

S2 F213 Twisting and bending theories applied to beams. Problem-

solving using analytical and numerical methods. .

States of stress and Composite stresses Fundamentals of 2D and 3D elasticity with applications for multiaxial states of stress.

8 18 4 8 18 4

F312 ����S3

F412a

Applications and real case studies using analytical and numerical methods. (theories, modelling, calculation, results analysis). Energy methods and Finite element modelling.

Development of energy methods and introduction to dimensioning calculations using the finite element method.

4 9 2

F412b

S4

Energy methods and Finite element modelling Study of real cases using analytical and numerical methods. (theories, modelling, calculation, results analysis)

4 9 2

F413.1

Research department: Dimensioning and Mechanics aspects

Use of digital tools in the research department. Particular attention will be paid to:

•� Modelling of the studied mechanisms, •� Relevance of the use of a digital tool, •� Validity of the results (uncertainty, need for confirmation by constructing a prototype...).

7 8

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 32: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

������

��������9��� ���

����������� ��������������4����������������������

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�������)���+��������

���

E��������������$����������������8 �!�� �������

���������9,��

�,-�$�"#���"���������%�&�#�&�����$��(����$"������������!� �.��/)0�/�1(��%���"��!&"2!�"��3�

��

����

��

�&�'������(��)��������*��������

� ��%���"�'���������� ����!� "�'� �!����"�'�

�������(���������������������������������������������������+,� �� -�� �� ���+������������������������,� �� -�� �� ���+������������������������!���������+����������� �� -�� �

$������������������������������������'�����������������������������������������������������������������������������������������,� -��

���4������ �����������������

���0� ��

%������������������������������������������+!�

•��6�����������#�0���������B������#��������'������������������������������������������������������������8���������+#���������#���������������#������������#������#�

��������������)���1���1���������������,,,9#�

•�5�������������������������+�����������������������������������)����������������������������#�

•��C�����������������#�•��@���B��������������������#�����������������������������������������������������,�

C���'����������������0����!�

��/���������#�������������������#�����������������������������������1��������#�

������������,�

���������������������������������������+���������������������=���������������������!�

•������������������8���������������������9�������������������������������������������������������������������=����������������������8���)������������������������������������������9#�

• ���+��������������������������+�����������������*���������+������+10����������,�8)�������)����������������������������9#�

• ������������������������������������������+�������������#�����������������������������������������������#�

�� ���+�����������=�������������������1)����������������,�

�56��

����������@6�������@@6��

�������

7��������#�)�������

����#���1������������

������������������

���

���

� ����������������������'�������������(��)1��)!�

�� �� ��

���(�&���7�0����9� ?� �?� 8�

4����!&����!�.�

��� ������������������������������������������������������*���������������������������#�

�� $�����������������������'��)��������+��������#�

�� E��������������������������������������������������������#�

�� /�������������������������������������������'������������������������������������8������������������������9#�

�� /�����������������������������������������������������������������������������������������������������������#��

��!$0"�'���$����� !�"����

2�������������������������������������������0�������������������������������)��(��������(�������������������,�/�����������������#�

�������������=������������(������������������������'�����������0��������������)����0���)��������+�����������+���*�����������������������,�

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�

�!���"!&���� 9�@���'�����������������������,�8����#������������������+,,,9�

�",&"�'�!(079�

��0��� �$������9���%�/!��<�= �,��"���9��

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 33: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!���� � � � � � � � � ����

���������������9��= ����4������4��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"������

���)�

��+�������� ������#�$�������������������������������������#�

%����������������������������!�%�����������

�����#�$�����������8��������������0���

���������9�

� �#�� �#�� ���

���

�������&�'������(��)������

��������������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� ��*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����������� ����!� "�'� �!����"�'�

���+������0������0:�������������������������0������,� �� -�� �� ���+�����������������������0������0:���������������)������,� �� -�� �� ���+������0������0:���������0������!���������+����������,� �� -�� �

$������������������������������������'�������������������������������������������� � � � � � � � � -��������������������������������0�����������)���������������,� �

���4������ ��������������������0� ��

%)�������8�����1��������#�������������������#��B�����������������������)�������������9!�

• /���������#�������������������#�������������������������1��������#������������*������������*���#�������������������������������������������������������������������#��)����������

���������������#�

�� ���+��������1�����������=��������0�������0:����������)������,�

6���������������0�������8�����1��������#�������������������#��B�����������������������)����

���������9!�

• /���������#�������������������#�������������������������1��������#������������*������������*���#����������������8���������������������9����������������������������������������������

����������0������#�0�������)����������������8������������� ����9#�

��%����������������(��)���)������������0����������0���#���������������������������������

����+����������������������8����+������������������9���������,�

3+����������������8�����������������'��������������)���9!�

�� ���+��������������������������+�����������������*���������+������+10�����

�����,�������������������������������� ����

���@6��

������:@�6�����

��56�

���������7��������#�)�������

����#���1������������

����������������

C��(��������������0����+���������,� �56��

�� �� ��

���(�&���7�0����9� ?� �?� 8�

4����!&����!�.�

����������������������'�������������(��)1��)!�

• ������������������������������������������������������*���������������������������#�

• $�����������������������'��)��������+��������#�

• 6����������������������B������������������������������������������������*������������*����������������,�8������������������*���

������������)����0����������������������0�+�������������)����(��)�����������������#�

• E������#�������������������������������������*��#�����������������0���������������������#�

• /�������������������������������������������'������������������������������������#�

• /����������������������������������������������������������������������������������,�

��!$0"�'���$����� !�"����

2�������������������������������������������0�������������������������������)��(��������(�������������������,�/�����������������#�

������������=������������(������������������������'�����������0��������������)����0���)��������+�����������+���*�����������������������,�

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�

�!���"!&���� 9�8��'���9�

@���'�����������������������,�8����#������������������+,,,9,�@������0��������)�������������?�1���?�����������������������������������������������,��,�,!�����������������������)����8. �����B����

. �������������1�������0����,,,9�

�",&"�'�!(079�

��0��� �$������9���%�/!��<�= �,��"���9��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 34: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � � � ����

�������� ������������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)�

��+�������� ������#�$������������� �����������������������#�

%����������������������������!����������������#�

$�����������8��������������0������������9�

� �#�� �#�� �#�� �#�� ��#�� ���

5�����������)���� ���

����

��������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� &�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ���������� ����!� "�'� �!����"�'�

�$����������������������������0������0:���������0������=�)������#�0��B����0������,� �� -�� ��2���+���������������������!��B������������������#�����+���������B����������,� �� -�� ��@��������������������������������������������������,� �� -�� ������������������+������������,� �� -�� �����������������������������������������������,� �� -�� ��

���4������ �����������������

���0� ��

������������������������+#��������������������������!�

•��6�������������!�����������������������������������������#�����������������������������J��'���������0+������������#�0+��������������������������8$�����������������9#�

•��5����������������������!��B��������8������������������������9�����)�����������������B��#���������������,�6������������������������������������#�

• H�������I���3��(�>����)#���������������������)���������������������#�• $���>����������������������������������������������������������������������#�

• 4������������������������#�•��%����������;���$����,�

2���������������������B��������������������!�

��C��B����0������#��)������#�������������������#�0������=�)�������8���������������

����������������������������������������9,�

������5�6��

������:56�

�������

7��������#�)�������

����#���1������������

����������������

��

���

���������������������������������83���I���������9,� �56�

�� �� ��

���(�&���7�0����9� ?� �?� 8�

4����!&����!�.�

����������������������'�������������(��)1��)!�

• �����������������������������������������������������������������������,�

• $�����������������������'��)��������+��������#�

• �������������������������0�����������������0����#��'��������������*��'�����������������������������������������������������

��������,�

• E������#��������������#�����+�����������(������������������������������������������,�

• @��������������������������������������)�������������0��)����������,�

��!$0"�'���$����� !�"����

2�������������������������������������������0�������������������������������)��(��������(�������������������,�/�����������������#�

������������=������������(������������������������'�����������0��������������)����0���)��������+�����������+���*�����������������������,��

�(�$"%"$��� !&"�"����

������!&�/��."�'��"��9�

�!���"!&���� 9�/�����������������,���������� �����8�����������������=����������������9,�@������0��������)������������������������������������������?�1���?�����������������������������������������������,��4,�,!�$��������

�������������)����8. �����#���������,,,9�

�",&"�'�!(079�

��0��� �$������9���%�/!��<�= �,��"���9��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 35: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9�8�

����

8��!�

���4A��������

�� ������������������4��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ������#�$�������������������������������������#�

$����������������!�����������������#�$�����������

8��������������0�������������������������9�

�#�� �#�� �#�� �#�� ��#�� ��#�� ��#�� �#�

�����

��&�'������(��)������

������������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� ��*���������!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������������ ����!� "�'����!����"�'�

�@��������������������������������������,� �� -�� ��

� ���+������������������������8���������#�����������������������������+���9,�/��)���������������� � ���� � -�����������������,� �

���4������ �����������������

���0� ��

������������������!�����������������������+����������������������,�

• 2�������������������+�����������������������������������������������B������#�• @���������+1��1��������+��������)���#�• ��)�������������������������������0+��B������#���5����������������KE�����0:����L�$�����L�������������L�E�������L�2���+���M���������,�

7��������#�

)�����������#�

��1������������

����������������

��

��� �� ��

��� ����������������������'�������������(��)1��)!�

���(�&���7�0����9� 8� >� ��

4����!&����!�.�

��

• $���������������������������������������������������������������������'�������8����������������������������(������������

�������KE�����0:����L�$�����L�������������L�E�������L�2���+���M���������9#�

• 4�����������������������)��(�������������+�������������������������������������+������������I�����������������������

�����0��������������,�

���!$0"�'���$����� !�"���

2�������������������������������������������0�������������������������������)��(��������(�������������������,�/�����������������#�

������������=������������(������������������������'�����������0��������������)����0���)��������+�����������+���*�����������������������,��

�����������������!&�/��."�'��"��9�

�!���"!&���� 9�

������������(�$"%"$��� !&"�"����

�@���������������������)�������������?�1���?�����������������������������������������������,��

4,�,!��E/$������������������������)����8. �����#�. �����,,,9#����������������)�����

�",&"�'�!(07�

��0��� �$������9���%�/!��<�= �,��"���9��

���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 36: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9�8�

����

8��,�

���4A��������

�� ������������������4��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)�

��+�������� ������#�$�������������������������������������#�

$����������������!�����������������#�$�����������

8��������������0�������������������������9�

� �#�� �#�� �#�� �#�� ��#�� ��#�� ��#�� �#�

��,��

�&�'������(��)������

�,-�$�"#���"���������%�&�#�&�����$��(����$"��� ��*���������!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� �������� ����!� "�'�����!����"�'�

�@����������������������+�����0�����������������,� �� -�� ��

�@��������������������������������������������������������,� �� -�� �

���4����+��������!�

���4������ �����������������

���0� ��

• 4B�����������������������������+���������������������������#�• 4B�����������������������������+��������������0����#�• E���������0��)���������������������+���������)��(�����B��������������8�����������9#���2�����������������������������+�������������0����#�����#�0�����8��� ��9#�

5�������������������������������8������������B������#����������#��������������+��������������9!�

• 6�������������������������������������������+�)��������+����������������������������#�• %����������� �������#� �������� ��� 0����� ���� ������#� ��� ��������� ��� �����+� ��������8�������� ��� �����#� ��������#� ���������� ���� ��������� ��������#� �������� '������#�

��'������'������#����,9#�

��$��������!��������������������������������������#����'����������,�

��56��

������5�6��

7��������#�

)�����������#�

��1������������

����������������

���

���

� ����������������������'�������������(��)1��)!�

�� �� ��

���(�&���7�0����9� 8� >� ��

4����!&����!�.�

• $���������������������������������������������������������������������'�������8����������������������������(������������

�������KE�����0:����L�$�����L�������������L�E�������L�2���+���M���������9#�

• 4�����������������������)��(�������������+�������������������������������������+������������I�����������������������

�����0��������������,,�

���!$0"�'���$����� !�"����

2�������������������������������������������0�������������������������������)��(��������(�������������������,�/�����������������#�

������������=������������(������������������������'�����������0��������������)����0���)��������+�����������+���*��������������������������������������!&�/��."�'��"��9�

�!���"!&���� 9�

�������(�$"%"$��� !&"�"����

�@���������������������)�������������?�1���?�����������������������������������������������,��

4,�,!��E/$������������������������)����8. �����#�. �����,,,9#����������������)����

�",&"�'�!(079�

��0��� �$������9���%�/!��<�= �,��"���9������

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 37: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

���������9�8�

���

��

8��;��

�����������������9�

��������������������4���������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ������#�$������������� �����������������������#�

%����������������������������!����������������#�

4����+��������#�$����B����������

��#�� ��#�� ��#�� ��#�� ���#�� ���#�� ���#�� ��#�� ���#�

�����

��

����������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� &�'������(��)��������*�����������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����������� ����!� "�'� �!����"�'�

�$�����������������������'��)����(��) "����"��"�'�8����������9����������������� � � � � � �����-�����������������������+��������������������������)���,� �

�@��������������������������������������������,� �� -�� ��

@����� 7�!�"$������)������������ ��"'�����=���#!&" !�"�����������������,�2���+���������

����������������������'����,�/���������������������������������+���������������������)���,�

��� -�� ��

���4������ �����������������

���0� ��

$��������#�����������������������������+���#�)���������0�������:�������,�

2���������������������������)�����������������������)����������������������������#�

'���������#����������������������'�������������������������,�

����(��������������������������'�������������'�������������������0��)����������������������

����+�������������������������+�������������������������������8�������������*������

���������������������������9,�

��

�B56����

7��������#�)�������

����#���1������

����������

������������

/�'���������������������������������������������,� �5�6��

�� �� ��

���(�&���7�0����9� 5� B� ?�

4����!&����!�.�

"��)1��)�)����0���������������'��������!�• C������������������������������'������+�������������8)��(�����������������:����9#�• 6����0�+���������������1����+�)�����)���������)�������������#������������#�������������+������������������������

������#�����������������)��(�����������������������������������������������B��+�����������0���,�

��!$0"�'���$����� !�"��������������������������!&�/��."�'��"��9�

�!���"!&���� 9�

�������������(�$"%"$��� !&"�"����

@���������������������)�������������?�1���?�����������������������������������������������,�

4,�,!�E/$������������������������)����8. �����#�. �����,,,9#����������������)����

�",&"�'�!(079�

��0��� �$������9���%�/!��<���������9���

��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 38: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

MODULE: Mechanics General objectives to be achieved in Mechanics. Students with a DUT in Mechanical and Production Engineering can work in any economic sector and, at the end of their second year, must be able to:

•� Understand and perform mechanical calculations in preparation for system verification or dimensioning problems,

•� Perform these calculations in a company, •� In the research department: they will be simple and processed graphically or with the help of

computer-based utilities for more complex cases. General remark. Mechanics is a subject related to mechanical engineering in product design and strain and stress.

Teaching recommendations. The course must:

•� Allow the student to develop a structured approach and a solving strategy adapted to the studied case,

•� Lead to the structured use of mechanical simulation software.

The use of digital tools is desirable and can be covered in tutorials and/or practicals. The use of software must be studied with a simple theoretical approach in order to allow students to step back from modelling and results.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

���

Page 39: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

� MECHANICS

Summary No.

Title of course summaries L T P

Statics of solids

S1 F113 Mechanism modelling. Statics of solids.

6 20 4

F214 Point kinematics.

Kinematics

Solid kinematics. Kinematic analysis of a mechanism.

S2 Kinetics

F215 Characteristics of inertia. Kinematic and dynamic torques. Relation between kinetic moment and dynamic moment.

Dynamics

8 �� 4 8 22

F313 Solid dynamics in an inertial reference frame. 4 22 4 S3 Energetics

F314 Work, Power, Potential energy, Kinetic energy, Vibrations.

Research department: Dimensioning and Mechanics aspects Use of digital tools in the research department. Particular attention will be paid to:

3 8 4

S4 F413. 2

•� Modelling of the studied mechanisms, �� Relevance of the use of a digital tool, •� Validity of the results (uncertainty, need for

confirmation by constructing a prototype...)

7 8

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 40: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����� �������!�� � � � � � � � ������������� ����

��������� ��������

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�������)��+����������

$�������������'����������'�����������1+����&+�D�����������������������������������

���������������������������������������,�

A�����

��

������������������

�������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"����

&�'������(��)��������*�����������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� �������� ����!� "�'� �!����"�'�

$������������+��������'��)����������������������������+,� �� -�� ��

�2���+����������������0���'���������������������������������������������:������������,� � � � � ���� � ������-�� ��

���4������ �����������������

���0� ��

;��������������*����������������!�

• /������������������0��������������������#�����������������'�����#�• ;��������������������8��������#���������������#�'����������������9#���;������������J����*���#����������B��,�

$������������:�����!�8����������������������������9,�

���������������8����������������+�����������������������������#���������0���������,,,�������

��������������9,�

/����������������������K������M������������)����������������������:�����,�

�������������������������������#������������)�!�

• C������������0�����������������8�����������������*��9#���������������������������+����#�• ���������������#���������������'��������)��)�������������������������:�����#���2������������)����������+��������������,�

%������������'��������������0����!�

• C�����8�����9�����������������+����0�������8�+�����+#��������������9,� ���)���,���6�����������������������������+����������,�

��

�?��

���

�?��

����

��?��

��?�

��������

���7��������#�)�����������#���1������������������������������

���

����������������������� �C�= )��= �

2����������!�80������������������9�

• ��������������'����������������#�

• 5���������������*����������������������#�

�� �� ��

���(�&���7�0����9� :� �5� 8�

4����!&����!�.��

����

• 5������������+������������������������������������B�������:�����#�

• $�������������������������:�����#�

• 5������������������������������������B������������+����#�

• ��'����8�/������/9��������������0���������+������+������������������������#�

• E��������������+�����������+�����8����������������B����0����9,�

���!$0"�'���$����� !�"�����

2������������������������������������������0����������������������������������������������)��(��������(�������������������,�

/�����������������#�������������=������������(������������������������'�����������0��������������)����0���)��������+�����������+�

��*�����������������������,����

�������!&�/��."�'��"��9�

��

��(�$"%"$��� !&"�"���

�!���"!&���� 9�%����������������������������������)�������0����������������������������������8�,�,!� �����������%��*����8A���+,,,9��

�",&"�'�!(079�&�������#��D�����������������0������82H2%5,,,9#�� �������

��0��� �$������9���%�/!��<���������9���

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 41: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�������!��� � � � � � � � � �� ��8�

C�����������

���)��+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���8�������������)�����������������:������������������������*���9��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'��������� ����!� "�'� �!����"�'�

��

���/�����������������������#�����������'���������������������������'���������������������������,� � � ����������� � � � -�

�����������)��(����������������������������������������,� �� ���-�� ��

2���+������������������>��(���������,� �� -�� ��

���4������ �����������������������������������0� ��

������������'�������������+!�'��������������������#����������������������#�����'�����������

'�����=����������,�

6�����(���������,��

�����������������'������,��

�����(���������,��

��������(����������8�������#���������������'�����9,�

���

���6��

���

����7��������#�)�����������#���1����������������������������

2����������������������(���������,��%����+���������������8���0�����)#����9,� ::6��

�� �� ���

���(�&���7�0����9� �5� �:� 8��

4����!&����!�.�

�������������������� �� ���� ��� ���%����������������0���0�����!�

• @������������������+�������(���������������������������������#���(����������������������+�����������������#�'������������������'���������������������������������#�

��/���������������������#�����������'���������������������������'���������������������������,��

��4���������������0�����������!�

• �����������������:����������#�

���!$0"�'���$����� !�"�����

�• /����������������������I����������'����������������������)���1������������������#�• /���������������������'������������������������������������������0��)����������'������!�

•� H���������+�

•� 2���+������+�

•� 7������������)����• /����������������������>��������=����������)#�

• %�������������������������0��)�����)��������,��

�����������!&�/��."�'��"��9�

�!���"!&���� 9�"�������������)���,�

�",&"�'�!(079�

�����(�$"%"$��� !&"�"����

���

�� $D����*��,��������'���������������D����*��,�C+�N,�C�D���������6,�ED�����B,�4��������4��������L� ��������5�������������

�� $D����*������������,�2�������������������������,�C+�2����������,��4��������/�����

�� ���D����*�������+����*��������������,�C+�&,�&�������B,�4��������3������

�� ���D����*��,�C+�&�����,�4��������4��������

�� H���������D����*��,�C+� ������,�4��������A������

��0��� �$������9���%�/!��<���������9���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 42: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � � ��� ���@�

C��������

����)��+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

"���������,�

$����������,�

��#� #� ������ ����

��&�'������(��)��������*���������

�����������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� �

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'���������� ����!� "�'� �!����"�'�

����."���"$�<������������������0���0�����!�

•� /���������������������������������������������������������#�

•� /�����������������������������#� -�

•� /�������������(������������+���������*����������)���1�����������������,���

����4������ ������� ��������������0� ���

��������������������������!�����#����������������������������������#��������������������������������#�

����������������#�3�+������������,�

"������������*���������+���������*��,�

E��������0��)����(�������������������+������������,,�

2������������80����������������������������������������������������������������9!�

• ���������������������������������������������������������������������0������������������������8������#��+������#���������������9,�2����0�+����������'���������������������0����������#�

��6�����������������������1����������������'�������������������)���������������������������

'�������8��(�����������������)�����2/�����������������������9,�

��

�@6����

B@6�

���

�7��������#�)�����������#���1����������������������������

����

��������������������� �� ���� ��� �!��

%����������������0���0���������������!�

• %�����������������������������������������������#�

• %�������������������#��

�� �� ��

���(�&���7�0����9� ?� ���

4����!&����!�.��

����

• %��������)�������*���������������������)���1�����������������!�

•� "����������*��#�

•� /+���������*��,�

���!$0"�'���$����� !�"����

%�������������������������������������������������������������)����0�������������0������������������������8������#��+������#�

��������������9,�2����0�+����������'���������������������0����������,�

5�����������#����������������������������������������0��)�������������������������������������������������0�����������������������

����������,��

����������������!&�/��."�'��"��9�

�!���"!&���� 9��/�����������)�����������������

�",&"�'�!(079�

��������

��(�$"%"$��� !&"�"����

���

�� $D����*������������,�2�������������������������,�C+�2����������,��4�������/�����

�� ���D��*�������+����*��,�C+�N,�C����������E������B,�4�������4��������

�� ���D����*�������+����*��������������,�C+�&,�&�������B,�4��������3������

�� ���D����*��,�C+�&�����,�4��������4��������

��0��� �$������9���%�/!��<���������!��

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 43: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � � ���� ����

A�������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)�

��+�������� ������������������!��������#�������

(����������8���+���9#�(�������#�������������

� �#� ��#� ���

#� �#� ����

��

������&�'������(��)������

����������������������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� ��*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� �������� ����!� "�'� �!����"�'�

��%����������������0���0����������+!�

�� %�����������������������������������+�������������������������������������#�

�� $��������������'�����+����������0����,�

����� -�� ��

�����&" � 7�!�"$�9�

����4������ ������ ��������������0� ��

�������������������������������+�������������������������������������,�$���������+!�

��+�������������������������+����������0���,�

/+������0��������,�

2������������80����������������������������������������������������������������9!�

• C��������#����(��������������#���6������������� ��� �������1����������������'�������������������)���� �����������������������

'������� 8��(�� ���� ����������� )���� �2/� ���� ������������� �����9,� 6�+������+�

������������������������,�

�@6���?@6�

��

7��������#��

)�����������#��

��1�������������

����������������

��

���

��������������������� �� ���� ��� ��

�%����������������0���0�����!�

• 5���������������������+����,�

�� �� ��

���(�&���7�0����9� 8� ��� 8�

4����!&����!�.��

���

• �������������������������������������+��������+�0���������+����8�9����'��)��������0:����'�#�

• /�����������)��������������'�����,�

�� ������ "$!����0�����0� �%�����&�"(&7"�'��!��"$��;�;�

��!$0"�'���$����� !�"���

%�����������=������)���������������������������)��������������+�������������������,�

3��)������������������(����������������������������������������������������������0�������0���������!�

• %�������#�

• ������+������������+�������������������������������#�

• ;������+���������������#�

• 5����������������������������,��

��������������!&�/��."�'��"��9�

������

��(�$"%"$��� !&"�"���

��!���"!&���� 9�"��������������+���������������������)�����

�",&"�'�!(079�

�� $D����*������������,�2�������������������������,�C+�2����������,��4�������/�����

�� ���D��*�������+����*��,�C+�N,�C����������E������B�L�4�������4��������

�� ���D����*�������+����*��������������,�C+�&,�&�������B,�4��������3������

�� /+����*��,�C+�&�����,�4��������4��������

��0��� �$������9���%�/!��<���������!��

��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 44: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � �������������������������������� ��8�

���4�������

����)��+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

� ������������������!��������#����������(����������8

���+���9�

�������� ���

��

��&�'������(��)������

������������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� ��*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������������ ����!� "�'� �!����"�'�

4'���������. ��(�����6�)��,� �� -�� �

�4'�����������������������(��������������������������������+����,� �� -�� �

�"��)���������������������'�0�������������+�����)����������������������,� �� -�� ��

���4������ �����������������

���0� ���

.��(�����6�)��,��

6��������������+#�"������������+#�"������������+���������8��������)�������!�

��)�������)��(9,�

+������)����������������������#����������������'�0�������,�

2������������80����������������������������������������������������������������#�������I�����9!�

• 6�����������������������1����������������'�������������������)����������������������8��(�����������������)�����2/�����������������������9#�

• 6�+������+�������������������������,��

��

7��������#��

)�����������#���1

����������������

�����������

��� �� ��

����������������������� �� ���� ��� ���

%����������������0���0�����!�

���(�&���7�0����9� �� ?� 8�

4����!&����!�.��

�• @������������������+�����(������������+���������������+����#�• @����������'�0��������+������)����������������������,�

����

��!$0"�'���$����� !�"�������������������������!&�/��."�'��"��9�

�����������

��(�$"%"$��� !&"�"���

�!���"!&���� 9�6���������)��(��������������'�0��������)�����������������������

�",&"�'�!(079�

�� $D����*������������,�2�������������������������,�C+�2����������,��4�������/�����

�� ���D��*�������+����*��,�C+�N,�C����������E������B,�4�������4��������

�� ���D����*�������+����*��������������,�C+�&,�&�������B,�4��������3������

����/+����*��,�C+�&�����,�4��������4��������

���0��� �$������9���%�/!��<���������!����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 45: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

���������9�8����

��

8��;��

�����������������9�

�������������������4���������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ������#�$�������������������������������������#�

$�������������������������!����������������#�

4����+��������#�/�����,,�

�#� �#� �#� �#� ��#� ��#� ��#� �#� ��#�

����

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"��� &�'������(��)��������*����������!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��������� ����!� "�'� �!����"�'�

���

��$�����������������������'��)����(��) "����"��"�'�8����������9����������������� � � � � � �����-�����������������������+��������������������������)���� �

@��������������������������������������������,� �� -�� ��

@����� 7�!�"$������)������������ ��"'�����=���#!&" !�"��������

���������,�2���+�������������������������������'����,�/���������������������������������+���������������������)���,�

�� -�� ��

���4������ �����������������

���0� ��

$��������#�����������������������������+���#�)���������0�������:�������,�

2���������������������������)�����������������������)����������������������������#�'���������#�

���������������������'�������������������������,�

����(�����������������������������'�������������'�������������������0��)����������������������

����+�������������������������+�������������������������������8�������������*���������������������

������������9,�

�����?����

��

�7��������#�)�������

����#���1������

����������

������������

/�'���������������������������������������������,� ��?��

�� �� ���

���(�&���7�0����9� 5� B� ?�

4����!&����!�.�

�������������������� �� ���� ��� ���

• C������������������������������'������+�������������8)��(�����������������:����9,�• 6����0�+�����!���������������������1���������+������)���������)�������������#������������#�������������+������������������������

�����������������������)��(�����������������������������������������������B��+�����������0���,��

���

���!$0"�'���$����� !�"����

����������������!&�/��."�'��"��9�

�!���"!&���� 9�

����������(�$"%"$��� !&"�"���

$�����)���������������������������'�����������������������,�

@���������������������)�����������������,�4,�,!�8. ������=�. ����������������������������)���#��2/1���������������)���,,,9�

�",&"�'�!(079�

��0��� �$������9���%�/!��<���������!����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 46: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�������

MODULE: Materials Science (MS) General objectives to be achieved in Materials Science. Students with a DUT in Mechanical and Production Engineering can work in any economic sector and, at the end of their second year, must be able to:

•� Know the main properties and characteristics useful for the selection and implementation of materials, in particular via an initial approach to the principal test methods,

•� Understand the behaviour of materials and distinguish between the various classes and the designations to which they must be introduced,

•� Know iron alloys and light alloys with regard to the transformations that control their microstructures, their elasto-plastic and breaking behaviour as well as adaptations to their implementation conditions,

•� Have sufficient knowledge of properties and implementation processes to widen the choice of materials (metal alloys, plastics, composites...) for the product design based on a wide view of materials, and make a choice on the basis on their technical and economic properties and their shaping processes,

•� Define “materials” specifications from which they can select adapted materials.

General remark. The choice of materials is not only based on this discipline and takes account of other factors such as implementation; mechanical engineering in product design; the economic aspect of materials and technologies... It is therefore essential that a connection is made between the courses offered in the various supplier modules (Mechanics, Strain and stress) and the user modules (design, production...).

The course must allow:

•� An approach to material selection and justification of choices, planning of adaptation treatments appropriate for their uses and indication thereof in a bill of materials, within the research department,

•� Definition of their shaping conditions in relation to manufacturing methods.

MATERIALS SCIENCE

Summary No. Title of course summaries L T P Material properties

S1 F114 Knowing the main properties and characteristics useful for the selection and implementation of materials

Metal materials

F216 Knowing metal alloys and, in particular, iron alloys and light alloys.

9 9 12 9 9 12

S2

Non-metal materials F217 Knowing the properties and the implementation processes for

non-metal materials Material selection criteria

6 5 4 11 4

S3 F315 Implementing a material selection procedure.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 47: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��� �������!�� � � � � � � � � ��8�

���������������������

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"��������)��+��������

����

6�+������������������������1+����&+�D���������������������������

���������������������+���������������������������������������

��,-�$�"#���"���������%�&�#�&�����$��(����$"������������!� �.��/)0�/�1(��%���"��!&"2!�"��3

��

&�'������(��)��������*���������

� ��%���"�'������� ����!� "�'������!����"�'��

�/�����������������������������������������������������0+���������������������������������

����������(��)�������������������������������,� -���

���$0!�"$!&�������

����4������ ������������������������������0� ��

%���������������#���������#���������������������������,��

4�����1������������'�������0���'����,��

4���������������������,�

5�������������������������������������+������0���(���,�

�!"��$&!�����8������#���������#������������+����9#������������������+����1

�������������������������������������,�

7�������������������������������������8������'��������+#�N�����������#�6�������������#�

�������������#��������������������9�

��������I�����������������������������

����$������%��!�����%������������+����������������������8�����1��������������������9�0����,�7���������������������������������,���+��������#����+��+�����������������������������,�

%����������������#����������0����+#����������#����,�

��������������������������������������,���+�������������8'��������#��������������#�������������#�������0���������#�������������9#�

������������������'����0������������������������+#��������������������������������+,�

�8@6����

��56��

�������@6���

�������

�7��������#��

)�����������#��

��1�������������

����������������

��

���

�#�&�(������%��!���"!&�� �56��

�� �� ���

���(�&���7�0����9� >� >� ���

4����!&����!�.��

���������������������������������������

���!$0"�'���$����� !�"����

�/����������������������������������������������������������������������������������������������������������������������

����������+�����������������������������#��,�,�������������������������������������������������������������,�

6���������������������������������������'������+���������������)�����������������I�������������8��������

��������#���������#�����������9,�G��������'��+��������������������������������������������������������������+������

����������0�������!�

•� 5������������#�

•� 5�������������������#�

•� 6����0������������������������������,�

/�������������� ��������������0+��������������������������������������������������������������0�����0��)���� �������������+�

����������,�G��������'��+�������0�����������������������0����������������������������������������+�����������������������������,�

5������+���������������0+��������������I��������������,�

�������!&�/��."�'��"��9�

�(�$"%"$��� !&"�"���

��!���"!&���� 9�%����������������8����������������#���������#�����������9�

�",&"�'�!(079�

��0��� �$������9��

���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 48: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � � ��:�

�����������������

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)

��+��������

$������������������� ��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*�����������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������� ����!� "�'� �!����"�'�

@�����0����+��������������:�����+���������������������������������+,� �� -�� ��

2��������������������������������#��������������������������������������'����0���'�������������������������������������������������������������,� -�

���������������'����������������������'�������������������������������������������������������

���������� -��

���4������ �����������������

���0� ��

�0!�����!��%���!�"����"��$������!&&�7��/�����������0����+�����+�#���*���=���������������=���������������������,�2���������������������

����+����������������+�,�

$��������������,�

����1����������������������)��������)����������������,�

�&!��"$"�7�!� �,��!."�'�6�����������������������������,�

3������������������������������������+�,� ��'���1���������������!������������������������������������8��������=���������

���������#����������������+�������#����������#��������������������������������������9,�

� !(�!�"����%����!&��!���"!&������0�"������3��������������!�*���������8%%%�������%����'��#����������*��������������9#����������#�

������#�����������8��������������������������������������+�9,�

%�������������������������8�������������#����������9���������������������������

8������10���������#�����10�������9�

6���������������������������!�0�������������������������#���������,�

���6��

������6�����

���6��

��

��������

7��������#�

)�����������#���1

����������������

������������

����

�� �� ���

���(�&���7�0����9� >� >� ���

4����!&����!�.��

����������������������������������������

���!$0"�'���$����� !�"����

�• E�����������0���������������������������+���������������0����+��������#�

• <�����+��������0����������������������������0��������#�������������������1�������������������������������0����+�����+�

�������������������������������������#�

• G��������'��+�������0�������������������'����0�����������������������������������������8��������I�,,,9�����������������������������������������+#�

• 6�������������������#��������������0���'������)����������������������������������������������������������������

����������+#�)����������������������������,�

• 4'������������������1�������������������������������������'�������������������������������I�����������������0���������#�

• ����������������������������#�����������������#���������������������������������������������'���������������

��������������������������������������������������#�

• ��������+������� ����%%%� ������%�������������� ���������I��� ������ ������� ��� �������� ���� �������� ��������J� ��������+�

����������������������������0��)����������������������������������)��������������������������+���0:����������)������������

���������������������������,�

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��'���#����������#��������������������#�����������������#�A/%,�

�!���"!&���� 9�

�",&"�'�!(079�

��0��� �$������9���%�/!��<���������!��

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 49: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�������!��� � � � � � � � � ��B�

�)�����������������

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)

��+��������

��#� �#� ���

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*����������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��� ����!� "�'� �!����"�'�

�<�����+��������������������������������+���#����������#�������������+����

���������������������������������*����������������#�����0���'�������)���������� -�

��������������������0����������������'��������������,�������'!�"$��!���"!&��

���4������ �����������������

���0� ��

����������������������������������������������������������������������������,�/�����������

0��)�������+�������������8������������#������������������������������9,�$����������

0���'�����8�����������������������������������������������9,� ������,�/����������#�������#�

�������'��+�������'����,�

���!�"$������������������������������������������������������������������,�$����������0���'����,�

������,�%�����������������,�

���(��"����!���"!&��2������������������������,�2��������+,�5���������������������,�2����0�+���������������

���0����,� ���������������������������0���'����,�

�856��

����56��

���56��

����

7��������#�)�������

����#���1������������

����������������

��

�� �� ��

���(�&���7�0����9�� :� @� 8�

4����!&����!�.��

������������������������������������������

��

���!$0"�'���$����� !�"����

�• <�����+��������������������������������+�������������������������*����������������������������������������������������

��'��������������#�• "��)������������������������������������������#�• <�����+�������������������������������������������������*���������������������������������������������0��������������

��'��������������#�

• ��������������������'������������������+�����������������������������:�����+������������������������������������*������

����������#�������������������������0������������������������������������������������)�����������+����������������

������������,��

����������������!&�/��."�'��"��9�

�!���"!&���� 9�$����������������������)���,�

�",&"�'�!(079�

��0��� �$������9���%�/!��<���������9�

����������(�$"%"$��� !&"�"��������

�����

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 50: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � ��@�

����������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"������

���)�

��+�������� 6������������������#��������������������������

���:����������������������������������

����������������,�

� �#� ��#� ����

���

������&�'������(��)�������

�,-�$�"#���"���������%�&�#�&�����$��(����$"��� ��*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����� ����!� "�'� �!����"�'��

�5���������������������������������������������(��������������������������������������>����������������������������>����*���������,� -�

���4������ �����������������

���0� ��

��&�$�"����%��!���"!&��%��� ��"'��!� �(�� �$�"��;�

. ����������������������������������������������������������+��������������

8��*������*��������#�����������������������������������������������

����B��#�������*��������'���9,�

�����+����������������������������������,� ������������������������

80�0��������+#�����0����9,�

����������������������������������������#��'����0����+#�����������������������

����������,�

2)����������������B�����������������������������)������������������������������#�������������,�

��

�556� ������

7��������#����

)�����������#��

��1������������

����������������

������ �� ��

���(�&���7�0����9� ��� 8�

4����!&����!�.��������������������������������������������

�����!$0"�'���$����� !�"����

�&��(���������������������������������������������0�0�����������������������������������������������������0���,�

�����+���������������������������������������������������������,�

5������������������������������������������������������������+���������'��������'������������0��������������������������������

����������������������������������������,�

���������������0����������������������������������������������������0�+��������'���������������������������1���������������#�����

���������������������������������������������������#��������������������������8�9�)��������'�������������,� ���������������

0����������������������������������������������������0�+��������'���������������������������1���������������#�������������

�������������������������������������������#��������������������������8�9�)��������'�������������,��������

���

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�$����������������������)���,�

�!���"!&���� 9�

�",&"�'�!(079�

��0��� �$������9���%�/!��<���������9�����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 51: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��

MODULE: Computing

General remarks. Students with a DUT in Mechanical and Production Engineering must be able to use a number of specific software programs. Learning and use of this software is an integral part of each of the following specialities: CAD, CAM, POM, Office Automation, etc.

Module objectives. The aim of the computing module is to allow students to place themselves in a company’s global computing environment, having acquired knowledge of networks. They must be able to:

1� Organise their computing environment and understand the architecture of a system, 1� Create simple applications allowing them to optimise or facilitate their own tasks, 1� Use a spreadsheet with ease, 1� Use the company’s database and perform the necessary queries.

Teaching methods. These courses are essentially based on applications from the field of mechanics and on networks existing in each department.

COMPUTING Summary No. Title of course summaries L T P

Computing:

5 10 15

S1 F116

Network, Operating system, Algorithms and programming language, Spreadsheets.

S3 F317

Databases:

Organisation, queries, data handling.

3 4 8

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 52: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � ������ ��:�

�������4��

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�������)��+��������

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"����

&�'������(��)������

��*���������

����������������������������������������������������������!� �.��/)0�/�1(��%���"��!&"2!�"��3� � ������������������������������%���"�'���� ����!� "�'������!����"�'�

"��)���������������������������������)��(�,� ����-������

7����������+����)��(�����,� ����-������

2���+����������0�����������'�������)������������������������,� ����-������

&��(�����������������������������0�������=����B����������,� ����-������

���4������������

��������������0� ��

H����������������������������)��(,� �56��7����������+�����������������������,� �56�

2���������������+������������0������������������������������������&��������� � � � � � � � � ����� � � � � � ���������@6�

� ��

�����������!�)��(������#���������������������#�������#���'�����������������,� �@6�

7��������#�

)�������

����#�

��1������

����������

������������

��� �� ��

���(�&���7�0����9�@� �5� �@

4����!&����!�.����

��!$0"�'���$����� !�"����

%���)����������������������(������0�������������������������������������������J���)�'��#�����������������������)�����

����������0��)����������'�������������������,�

%����������5���������������0������������������������������,��������������

�������!&�/��."�'��"��9�

�����������������(�$"%"$��� !&"�"���

��!���"!&���� !�2��������������������������,�

�",&"�'�!(079�

��0��� �$������9����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 53: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��������9���� � � � � � � � ������ ���B�����

�������4��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+��������� ���������������������������������������������������������������������������

�����

�,-�$�"#���"���������%�&�#�&�����$��(����$"����

�&�'������(��)������

��*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����� ����!� "�'� ��!����"�'�

"��)�������������������������0����,� �� -�� ��

&��(�����������������������������0�������=����B����������,� �� -�� ��

���4������������

��������������0� ��

/���0����!�����������������������������0����#���0���#�*������#�������,��/���0������������,�

7��������#�

)�����������#�

��1������������

���������������

�&� �� ��

���(�&���7�0����9��� 8� ?

4����!&����!�.����

��!$0"�'���$����� !�"����

%���)����������������������(������0�������������������������������������������J���)�'��#�����������������������)�����

����������0��)����������'�������������������,�

%����������5���������������0������������������������������,����������������

�������!&�/��."�'��"��9�

�������������������(�$"%"$��� !&"�"���

��!���"!&���� !�2���������������������������

�",&"�'�!(079�

��0��� �$������9����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 54: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����������������

�CU 2: TECHNOLOGICAL EDUCATION

Semesters 1, 2, 3 and 4

- MECHANICAL ENGINEERING IN PRODUCT DESIGN

- PRODUCTION

- PLANNING

- METROLOGY

- ELECTRICITY, ELECTRONICS AND AUTOMATION

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 55: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

MODULE: Mechanical engineering in product design. General remark.

At the beginning of the course, priority is given to learning technological communication tools (mechanical engineering tools) used between industrial company partners and, in particular, all of the participants in the numerous stages of developing an industrial product in all fields of mechanics applications.

Knowledge of these tools allows students to increase their awareness of the technology omnipresent in their environment by analysing widely-used mechanical systems. This introduction to initial design procedures, applied restrictively to constructive arrangements of mechanical joints, shows students that, in this field they can also create and not only describe and analyse.

Later, it is important to insist on the need to organise mechanism manipulations and

technological discoveries in order for students to “tactilely” understand mechanical systems. In order to meet the discovery, analysis and creation objectives, it is essential that all of the

mechanical engineering in product design modules are taught in coordination with the other courses in the various supplier modules such as Strain and stress, Materials, Production... from the start of the course programme.

The main objectives to be achieved.

In Semester 1: •� CAD modelling methodology, tool learning and knowledge of representation

modes. •� Identification and modelling of elementary joints from a qualitative viewpoint. •� Functional and technological analysis of simple mechanisms and introduction to

functional dimensioning. •� Practical work on manipulating mechanisms and technological discoveries.

In Semester 2: •� Design of systems with choices and introduction to component pre-dimensioning. •� Knowledge of functional analysis tools (without computer help). •� Modelling methodologies adapted to the CAD software used. •� Definition and geometric tolerancing of mechanical parts. •� Creation of production definition layouts (for dimensioning and tolerancing).

In Semester 3: •� Justification of the components in mechanical power transmissions by calculation. •� Value analysis methodology. •� CAD modelling methodology associated with simulation (behaviour of

mechanisms, parts, etc.) and prototyping.

In Semester 4: •� Study of hydraulic, pneumatic and electromechanical power transmissions. •� Practical work on manipulating and learning about power transmissions. •� Introduction to the optimisation of the “costs, deadlines, quality” triptych by abandoning

the sequential process and adopting an organisation in which all of the operators work simultaneously (simultaneous, concurrent or integrated engineering).

•� Proposing new or even innovative solutions thanks to continual information and the systematic analysis of new technologies (technological watch).

Teaching recommendations. The proposed teaching activities require a sequential progression in the mechanical engineering in product design modules and coordination with the progression of the supplier modules. Depending on the activity, students must have available at their individual workstations: © Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 56: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

1� For the first sessions, the (easy-to-disassemble) real mechanism, 1� The basic kinematic diagram, 1� The technological diagram, if necessary, 1� The mechanism layout, 1� The directories or catalogues of the parts to be mounted, 1� The incomplete models of the mechanism (depending on the practical), 1� A library of standard elements, 1� The two mechanical assemblies for creating an interface, 1� Pre-dimensioning and calculation software (cotter pin, assembly pins, plain bearings,

rolling bearings...).

MECHANICAL ENGINEERING IN PRODUCT DESIGN Summary

No.

Title of course summaries L T P

Mechanical engineering tools and languages

Representation language and modes used by the

F121

S1

the mechanical design Research Department. Knowledge of these tools will allow students to increase their awareness of the technology omnipresent in their environment by analysing basic widely-used mechanical systems. Applications related to learning of communication tools for mechanical engineering: the various types of representations (diagrams, sketches, plans, digital models). l

Product design: analysis and design techniques.

4 6 20

6 4 20

F122 Using a solid modeller to start designing a part for assembly. Providing the fundamentals of mechanism technology.

Product definition

Course F221 must allow students to discover the relation with the other design process elements:

4 6 20

F221

S2

F222

functional product specifications, dimensioning, kinematics, industrialisation, etc. Qualitative functional dimensioning and geometric tolerancing. Simple pre-dimensioning.

Construction and industrial applications

Designing a steering joint in rotation and in translational motion with rolling elements. Choosing a sealing and a lubrication. Series of themes, the study of which should lead to the product definition layout (construction drawings). The layout for at least one of these parts must be completely finalised.

4 6 20

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 57: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�MECHANICAL ENGINEERING IN PRODUCT DESIGN

Summary No.

Title of course summaries L T P

From the specifications to constructive solutions

Analysis and calculation aspects that will be

F321

S3

F322

F323

F421.1

S4

F422

developed in Semester 3 in courses F321 and F322: •� Studying specifications and

contributing to their development, •� Participating in the various stages of

design and/or redesign of a product, from modelling to product definition.

•� Looking for technological solutions based on specifications

From the specifications to industrial

mechanical systems engineering Themes based on industrial solutions in fields privileging technological diversity for various:

• Sectors of activity, •� Products (type, number...), • Procedures, • Processes.

Choosing constructive solutions

Choice of motorization components. Power transmission. Vibratory analysis. Local competency in mechanical construction (hydraulics, cars, aeronautics, mechatronics, structure calculations...)

Study in a digital chain context Participating in all of the stages of designing and industrialising a part of a mechanical assembly in view of identifying the digital design and industrialisation chain.

Mechanical engineering in product design: studies and developments

Emphasizing the economic aspect associated with any study, given that 80% of costs are incurred as early as the design stage. Developing mechanical design applications (parametrics, dimensioning, materials, dynamics, energetics, etc.) in which team and semi-independent work must be privileged. The student must be familiarised with “technological watch” in order to remain informed of new solutions, products and processes. It is important to insist on the need for the students to remain informed of technological developments through specialised journals, fairs, visits to industrial sites and analysis of competition (patents, technical publications, etc.)

6 14 10

10 20 4 6 20

2.5 20

10 20

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 58: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

��������9��� ���

������������4�����4�����������4��4���

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(����*�"�"����

���)�

��+��������1�H�������������������������(��)����������������'�������

���������� ��'���� ������� ���������� ���=��� �� ���(���

���������������������+�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

!� �.��/)0�/�1(��%���"��!&"2!�"��3�

���

���

&�'������(��)��������*���������

���%���"�'���� ����!� "�'� �!����"�'�

&���������������������������������������������������������������,� -�

C������0��������������������������������'�����������������������8��+���#������� -�

�����9���������������#�)����'�������������������,�

C������0������K�������0��M����=���K��+����M�����������B�����������������0+�� -�

�������������0�+,� �

"��)������)���������������������������������������������������������0�+,� -�

�����������+�����������������������������������,� -��

���4������ ��������������������0� �

C������������������������������������!�������������������������������������#����,�

5����������������������������������,�6��������������������������������������,� ���+����������������������)������������������������!���5���������������(���������

��������I�����,�

7����������B���������������������������������+�����!�

• ��!��"�'�����!((&"$!�"��������������������������������������8�������������������'�9������������������(������#�

��/����������������������������)��������������,�4��0�����������������������������,�

&�+���1���������B�������!������������������������������������,�

H�����������������������+����#���������������������������������������#��������������������'����0����������

���������8)�������������������9,�

�������������������������������0+������0�+������������B���������������������������������+��

��� ����������� ������ ���=��� ����������� ���� )���� �� ��0���+� ��� ��������� ��������,

��56��

����56������@56��

�����

7��������#�)�����������#���1����������������������������

��

�� ��� ���

���(�&���7�0����9� 8� :� �5�

4����!&����!�.�

%��������������������)�������������#�)����������+������������������������������������������������#��������������������������������

�������������������������������(�����(��)��������������������������������������������������������������������,�

2������0�����������������������#��������+������'�����������&�!��"�'��%���$0��&�'"$!&�$�����"$!�"������&�������0��)���������������

������+�������������#��������������#�����������������������������������������������������'��������������������������������������������

�������������������������,�

"��)���������������������)��������)�����������������������������)������������������������+������������������������'���������0+�

����+�����0�����)����+1�����������������+�����,�

��!$0"�'���$����� !�"����

������������������������������#������������������0�����������������������������������!��0����!&��,-�$�<�"��� "'"�!&��� �&�!� �"���

&!7���,�

%������������������)�+����(��������������#�������������������������������(����������������������+���������8��! "�'�!$�"#"�79,�

3������������������'��+���������������������+����,,�

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9� E��������0���'�������������������������������������������>������+���'���������

8��������������������#���������*�������#����������,,,9#�����������������������������������������8�����#���������#���������������������������9�����������������������������(��)�����,�

�!���"!&���� !����2/�)��(��������������������)�����0������" �!&���&��"�������&�!��"�'�!� �!((&"$!�"����%�%�� !����!&�������

������������$0�"*���;�

�",&"�'�!(079��$�����������������0��(#����������0��(#��+�0����������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9��

��0��� �$������9���%�/!��<�= �,��"���9��2/���������#�����1������������B�������#��������������������������������

8��������#��/����. �0�����9�

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 59: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9���

���

����

����������49����A����!� ����4������+����

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� �!�$���������8��:�����������9,� ,�

�!�$���������������������������,� ��!�5����������������!�����������������������������,�

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

!� �.��/)0�/�1(��%���"��!&"2!�"��3�

&�'������(��)��������*���������

��%���"�'������ ����!� "�'� �!����"�'��

"��)��������0����������������������������������������������������!��������:�����,� -�

2���+�����(���������������!��������+���������������������������+�:��������������

*��������'��'��)�����,� -�

5������+�������+����������������������������+��������������(��������������,� ��

/������������������������������������������+�:������ -�

/�����������������������0�+�0+��������������0�+�������������+�:�����,� -�

@���������������������������������������������������������0�+,� -�������������

���4������ �������

���0� ��

H����������������������������������,� ���+��������������,� �������I������,��������:�����!�

�����#� ������#� ������ ��������J� ��������� :������ ��� ��������� ���� ��������������������� 0+� �������J�

����������������������������,� ���+��������������������,� ������������������������������8����������

�����������9��

2���+���������(��������������,�5��������������������+�������������������,�8 �����������������������:�����������9,�

��?�������?�

�7��������#�)�����������#���1�����������������������������

��

$�������������������������������������������������'�����,�

���

�������������+�����������0����'�������������������������������������� ��"'��(��$� ����;�

�2/����������!���'�����������������������+,��

��?��

��� �� ��

���(�&���7�0����9� :� 8� �5���

�4����!&����!�.�!,�����0���� �&�;�

�������������+�����������0����'���������������������������������B������������8 "'"�!&��� �&�!� �&!7����%"&�9���������

���������������������������������������(��)�����!�

• &����������������������+���������0�+�������������,�

• /�'������������������������0�+�������*���,�

��!$0"�'���$����� !�"����%����0���� �&�;�

��������������������������#������������������0������������������������������������!��0����!&��,-�$�<�"��� "'"�!&��� �&�!� �"���

&!7���,�

%������������������(��������������#�������������������������������(����������������������+���������8��! "�'�!$�"#"�79,�

��!$0"�'�!$�"#"�"��9�� ��������������+���#������������#�����������������������%��$�"��!&����%!$������:�����#�������������������������

:�����������)���0+�0�����������������������+�����(������������������,�

%��������������������"�"�"!&� ��"'��(��$� ����#������������������'��+��������������'�����������������������������:�����#������

���)��������������#��������������#����+����������������������������+�������0����������+��,�

�(�$"%"$��� !&"�"���

%�������������*����������������������������(�!$�"$!&�/��.�����!�"(�&!�"�'���$0!�"����!� <� ��"�'�������������������#��

��$0��&�'"$!&� �#�&�(�����9�����������������������+����������������������0������������������������,�,�

������!&�/��."�'��"��9��E��������0���'�������������������������������������������>������+���'���������8��������������������#���������*�������#����������,,,9#�����������������������������������������8�����#���������#���������������������������9�����������������������������(��)�����,�

�!���"!&���� 9����2/�)��(�������������������#����������������)������������������������!�������������������������0�����)����

0�����������������#���+�����������������������������������0���������������+,�

�",&"�'�!(079��$�����������������0��(#����������0��(#��+�0����������������#���������������������#�����������:�������#�����������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9�

��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 60: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � � ����

�������� �������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+��������

�������

�A������#� �������������� ������������� ���� ������������ ���

��������� ��������!� �������#� ��������� �������#� ����'��#�

�������0����#����,�

��������������������������������������,��

������������ ��� ������� ��������!� ���� ��������� ��� ��������

������� ���8 ��������������9������0���������������,�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

� �!�$��������� ��!�5����������������!�����������������������������,� ��!�G�����+�����������������������,� �!�$���������������������������� ��!�6���������� �!� ������,�

�!�8$����������������!���������#���������9�

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3���������������������������������������������������������%���"�'����� ����!� "�'� �!����"�'�

����@���������������������+��������������������������������������������,� -�

/������)��������������1��������������������������8)���=)�����������������������)���9� -��

���4������ ��������������������0� �

��$�"��!&������������������'������"$���&��!�$"�'�85 7���������������H6 ��������9,�

���+����������������������������������������������������������������������'��)��������������

�����������������������������������,�

5�������������������������������������������������������������������)�����������������������

����������,�

/������������"�(&������������������������������������0������)����'�������������������0����#�

���������0+��������K������M����1�������������������������,�

6������������������������������������������������������������������I���������������,�

+�!&"�!�"#��%��$�"��!&� "����"��"�';�

/���������'���������������������������#����������0+�����������1�������������������������,�

���856�������:56����

���7��������#�)�����������#����1����������������

������������

�����

�� �� ��

���(�&���7�0����9� 8� :� �5�

4����!&����!�.�

/����������+��������*�����������������������1���������������������������������,�"��)����

���������0�������������������������������������2/�����)��������,��

6�������������+����������������0�+�)����'����������������������������������,��

6������������������������+���������������8����������'��)�#�����������#������������8���������

����������������������99,�$�����+����0�����5 7������������������0�����������������������������,��

��!$0"�'���$����� !�"����

���������������'���'����0���������������������������)�����������������'������)��(������������������������������'��+#���������+�

���������������������������!�• � ���������������������#�����8���+1��1���������9���������������#�• � %���0�����(����������������#�• � %������������������������#������������+#�• � %���������������+���#�• � %���������������������������������������������0���������#�• � %��������������������������������������8��������������������������9#�• � 2���0���+���������������������#�• � %����)������������������0������������������������������#�

• � 6��1���������������������������������)����8����������#������0�+�����#�������0�������#���������0�������#����,9,�%����������������������������0�������0��)��������������������������������������������+�������������������������������������+�

��������������'������'��+����������,��

�(�$"%"$��� !&"�"��;�

%�������������������'����(��)�������������5 7����������������������������������������������������������H6 ��������,�

������!&�/��."�'��"��!�2�����������B����������*������������������������������������������������,�

�!���"!&���� 9����2/�)��(������������������������#����������������)������������������������!�������������������������0�����

)����0�����������������#���+�����������������������������������0���������������+,,�

�",&"�'�!(079� $���������� ������� 0��(�#� ��������� 0��(�#� �+�0���� ���� ��������#� ��������� �����������#� ���������� :�������#�

������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9#�5 7��������������������������������H6 ��������� © Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 61: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�������!���� � � � � � � � � ����

�����������������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���� ����������2���+��������6��:����$�������������)��+��������

���6�������/���������� ���6�������/�����!�2���+�������/������%�����*�����

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

!� �.��/)0�/�1(��%���"��!&"2!�"��3��

&�'������(��)��������*���������

��� ����!� "�'��

��%���"�'� � �!����"�'�

/������������������:�������������������:�����)��������������������,� -�

���������������������������0��������,� -�

2���+������������������������+������������������'�,� -�

6��������������������������������+���,,� -��

���4������ ������ �������������������

���0� ��

���+��������������:����!����������������������������������+��������������������,�

3������:�����)������������0�������!�0���������������#���������������#��������������������

'������������������������������������������,�

/����������������������+�����0����0�������������+�����������������0�������,� ������

������������������������������������������,� �������:�����)������������0��������

/����������������������������������������+�8�����������9�������������������'������������������1

����'��0����0��������������1����'���+�����������������0������,�

2���������������0����0���������������������,����

��C��������������������������������������+������������������'�,��

&�0������������������������������,�

������ ��� ������#� ���� ����+����)����� ������������ ��� ���� �������� �%"�"�"��� &!7���� 8�������������

���)����9,� %��� ��+���� ���� ��� ������ ���� ��� ������ ������ ����� 0�� $��(&���&7� %"�!&"�� � )����

*��������'�������������������������������,�

�����

���?�������

���?��

���

�7��������#�)�����������#���1����������������������������������

�� �� ���

���(�&���7�0����9� 8� :� �5����������

�4����!&����!�.�

���!$0"�'���$����� !�"����

��(�$"%"$��� !&"�"��;�

�������������%����������!�7� ���9�

��� �$�� �%"�"�"��;��

������!&�/��."�'��"��9�� ��L�������������)��(,�/����������������������+�����0����0�������,� ���+������0���'���������

���������������������������0�����������������������������0����0������������0�����

�!���"!&���� 9� � ��2/�)��(������������������������#����������������)������������������������!�������������������������0�����

)����0�����������������#���+�����������������������������������0���������������+#�0����0�������#���������:���������������#���������������

����0����0�������#�����������������������,,,�

�",&"�'�!(079� $���������� ������� 0��(�#� ��������� 0��(�#� �+�0���� ���� ��������#� ��������� �����������#� ���������� :�������#�

������������ :�������� 8����� ��� 5���������� ��� %�����������#� �>@����� A��'����,,,9#� ���� 0���� 0������� ����������� ����� '�������

�������������,�

��0��� �$������9���%�/!��<�= �,��"���9��2/���������#�����1������������B�������#��������������������������������8��������#��/����. �0�����9��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 62: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!��� � � � � � � � � ����

������������� ���������������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� •� ��������������������������������•� �������������������

•� ����������������

�� ����������� ���"����������

��#� ��!�$���������

�!�$����������������!���������#����������

��� ���������������

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

!� �.��/)0�/�1(��%���"��!&"2!�"��3�&�'������(��)��������*�����������%���"�'������� ����!� "�'� �!����"�'��

���+������)�����������������������������������������������+�'��)�����,� -�

. ������������������������������������,� -�

�������������������������������������������������������������,� -��

���4������ ��������������������0� �

/�������������������������������0����0�������,� ������������������1���������,�2������������������������

���������������������������������0����0�������,�

2�������������������������������������������0����0���������������������,�

3����������������+������������������'��#������������������#�)�������������+�����,�

�����������������������������������������0�����������������'��,�

4����+��������������)����������������,� 5��������������������������������������������������#��������������

������������*���#��������������������������+,�

2��������������������������������������!������+�������������������'�������������������������������,�

6�������+������!�0��������������,�

2���������������������������/�"�"�'���������������� ���������� �������������#������������'�������� ��'���� ������������%��������� �����������������$��!�"�������� ,2, ,%,��������,�� � � ������������

��56�������56��

�����56�

��������7��������#�)�����������#���1���������������������������

� �

2������������ 8������������� ���9!� ����+��������0��������$�������"� ����"!&���&��"���� ��� ��������� ���

�0:����'����������������������(�"#"&�'"�'���$0��&�'"$!&� "#���"�7���������������+���'�����!�

•��;����������������������'��+#��•��;����������������������#�•��;���������)���#�•��;�����������������������������������#��•��;������������0�+�������������,��

��

856����

��� ��� ���

���(�&���7�0����9� :� �8� �5�

4����!&����!�.�

<�����+�������������������������������������)���������������������(�����������'�������0+������������,�

$����������������������+�����������8;�����2���+���9,�

"��)��������������8�9����������������2/�����)���������������)���������������80���'������������������#������#����,9�����

������+����,�

��!$0"�'���$����� !�"����

%����������������)��������)�������������������0�����������>��������+�������������+���#����)�����������������������#����������������������

�����������������������������������������)����/�"�"�'���������������� ���������� �������������,� &�(�)���#�������������������������������

���)!� �����������'�������� ��'���� ������������%��������� ��������#�����$��!�"�������� ,2, ,%��������#��������0���(��������������

���)� ��������� ���� ������������ �� ���������� ��������,� 5�� ��������� ��� ������ ���������������#� ������� ��� ����� ���'���� ��1������

(��)����������������������;�����2���+���,�

%����������������'���������������������������������8�����������������+� ���9��������0��������������)��������������,�

�(�$"%"$��� !&"�"��;�

������!&�/��."�'��"��9��%����������*�����������������������������������������#�������������������������������(������#�����

�������������0��������������������������+����������������������������������?���������������������'�����������������+,�

�!���"!&���� 9����2/�)��(������������������������#����������������)������������������������!�������������������������0�����)����

0�����������������#���+�����������������������������������0���������������+,,�

�",&"�'�!(079��$�����������������0��(#����������0��(�#��+�0����������������#���������������������#�����������:�������#�����

������������:��������8��������5�������������%�����������#�&>@�����A��'����,,,9�

��0��� �$������9���%�/!��<�= �,��"����

�2/���������#�����1������������B�������#��������������������������������8��������#��/����. �0�����9���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 63: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9���

����

����

������������� ��������

�����������������������A�������4�����4��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+��������

���

•� ��������������������������������

•� �������������������

•� ���������������

•� ���������������������

�#� ��!� �����������"����������

��#� ��!�$��������� �!�$����������������!���������#����������

��� ��������������� ��!� ������������������������������������'������������

�����������������������

�,-�$�"#���"���������%�&�#�&�����$��(����$"���&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� �� ����!� "�'� �!����"�'�

�/���������������������+��������������������)������������������,� -�

����4������ ��������������������

��������������0� ��

�����������L�������+��������0��������$�������"� ����"!&���&��"���� ���������������������������

�0:����'����������������������(�"#"&�'"�'���$0��&�'"$!&� "#���"�7���������������+���'�����!�

•� ;����������������������'��+#�

•� ;����������������������#�

•� ;���������)���#�

•� ;�����������������������������������#�

•� ;������������0�+�������������,�

���

��556��

��7��������#�)�����������#���1����������������

�������������

�� �� ���

���(�&���7�0����9�� �5� �5��

4����!&����!�.�!,�����0���� �&�;�

<�����+�������������������������������������)���������������������(�����������'�������0+������������,�

$����������������������+�����������8;�����2���+���9,�

"��)��������������8�9����������������2/�����)���������������)���������������80���'��������

����������#������#����,9�����������+�����,,�

��!$0"�'���$����� !�"����%����0���� �&�;�

���������������'���'����0���������������������������)�����������������'������)��(������������������������������'��+#���������+����������

������������������!�

•� %���8���+1��1���������9���������������#�

•� %���0�����(����������������#�

•� %������������������������#������������+#�

•� %���������������+���#�

•� %���������������������������������������������0���������#�

•� %��������������������������������������8��������������������������9#�

•� 2���0���+���������������������#�

•� %����)������������������0������������������������������#�

•� 6��1���������������������������������)����8����������#������0�+�����#�������0�������#���������0�������#����,9,�5�����������������������������������#������������������������������������'������1������(��)����������������������;�����2���+���,�

�(�$"%"$��� !&"�"��;�

������!&�/��."�'��"��9��%����������*�����������������������������������������#�������������������������������(������#�����

�������������0��������������������������+����������������������������������?���������������������'�����������������+,�

�!���"!&���� 9����2/�)��(������������������������#����������������)������������������������!�������������������������0�����)����

0�����������������#���+�����������������������������������0���������������+,�

�",&"�'�!(079��$�����������������0��(#����������0��(�#��+�0����������������#���������������������#�����������:�������#�����

������������:��������8��������5�������������%�����������#�&>@�����A��'����,,,9��

��0��� �$������9���%�/!��<�= �,��"����

�2/���������#�����1������������B�������#��������������������������������8��������#��/����. �0�����9��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 64: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

��������9���� ���

�������4�����������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+��������

����

•� 4������������������������������+������

���� ���� ����������� ������������������

����������,�

�� $����������������

� �!� �������

��!�"���������� ���!�4��������������I������ ���!�������������������������������������������

��!� ������������������������������������'�������������

��!�/+�������

��!�4�����������

�,-�$�"#���"���������%�&�#�&�����$��(����$"���&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ����� ����!� "�'� �!����"�'�

"��)��������������������������+��������������������������������������#������������ -�

������+����������������������,�

2���+������"�(&���+����������������,� -��

5������+��������������'��������������#�������������������#��������������+�������������,� -��

�������������������������������I��������������������������������������� -��

���4������ ��������������������0� �

%���������������������+��������������������������������!������#�������#��

������0��������'����#�'��'��#����,#�� � � � � � � � ������� � � � � �������?�

����������������������������������������������������������������+��������,��2���+����������������I�����������������+����������������#�����������)��(,�,�

���������������������������������������,����?��

7��������#�)�����������#��

;�0�����+��������������������������+�����,�%�������������������������������������,�� �?��

����������������������������������������������,� �?��

2��������������������������������������,� ��?�

����1������������������������������

�� �� ���

���(�&���7�0����9�� 8� :� �5����������0��.��/)0�/����,��!$*�"�� �!� �!������ 9�

�����4����!&����!�.�

•� 2���+���������+�������#����������#���������������������)���������������,�

•� ����������������)���������������������������������������������#��

•� ����������������������������������������������������������I�����#�

�� $������������������������������+������������������+�

,�

��!$0"�'���$����� !�"����

%��������������������� ��������������������������������������#��������������#�������������������'��)��(���������������������

���������������������������������,�

�(�$"%"$��� !&"�"��;�

������!&�/��."�'��"��9�� ��������I������)�����+���������������������������I������������*���,�

�!���"!&���� 9���3+�������������0������J��2/!�������������0��������������������������������#���2/�)��(������������������������#���

�������������)������������������������!� ������������������������0�����)����0�����������������#���+�����������������������������������0��

�������������+,�

�",&"�'�!(079��$�����������������0��(#����������0��(�#��+�0����������������#���������������������#�����������:�������#�����������������

:��������8��������5�������������%�����������#�&>@�����A��'����,,,9��

��0��� �$������9���%�/!��<�= �,��"����

�2/���������#�����1������������B�������#��������������������������������8�����#��/����. �0�����9� © Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 65: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�������!���� � � � � � ������������������������������������ 8��;��

���A������4������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+�������������

�•�"��)���������������������������������2/�����,���/���������������������������������������������������������������������������

��"��)������������������2$�����,���$����������������������������6�����������������������������������������������������������"��)������������������������������������������������)���,��

•� %�����������������������������'�����$����������4�����������5��6�������/�������������,�

�� %�����������������������������'�����$����������6�����������������,�

�� %�����������������������������'�����$������������������

��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������ ����!� "�'���!����"�'�

�6��'����������(��)��������������+���������������������������������������������������� -�

������������������������������������������!������������������,�

6��������������������K���������#����������������#����������M��������������������������B������������������������ -�

���������������������,�

@���������������������������������'������������������������������������������������������� -�

�����0�����������������������������������������������������������������������������+,�

��)���������������������������������0����������������������������������������������������������������� -�

������+>�����������������'��+,�

5���������������������������������������K�����#����������#�*�����+M������+���0+��0���������������*���������������������

����������������������������)��������������������������)��(��������������+�8������������#�����������#�������������

�����������9� -�

���4������ ��������������������0� �

/���������������� �������������������0�+�0+������������ �������������'�������������������!� � �����������

���������#������������+����������0�+#�����������I������������������0��������������������������������������

���������������������������������,�

/�����������������������������������������������������,� 5�����������������������������������������������

��������������������������������������������,�

����������������������������������������� �!"�������� ������"���������������"������� ��������

#���������������� ������������������������������� ����������������� ���� ����������

$���������������������������������� �������� ����������%���� ��������� ���������������"�����������"�

�������������

��� �������������������������������� ��������� ��� ��"��������� &��� ��������� ����"����

� ������� ������������������

'���������������������������������� ������ ������

�@56�������

�()*��

����

���

�7��������#�)�����������#���1����������������

��������������

�� �� ��

���(�&���7�0����9�1%����0�� ��"'��(!��3� �;@� �5��

�4����!&����!�.�

5�����������0������������������������������)������������������������������������)�����������������#������������������������������0�����'��)��(�0��)����������������������������������������,,�

��!$0"�'���$����� !�"����5���������������������������������������������������������+�������)�����������������������������������������������0�+�������������������������+������0�+������������0��(,��0���/��(!�����%��0���� �&��$!�����,�� �!&��/"�0���(!�!��&7;�

�(�$"%"$��� !&"�"��;�5������������2/=�2$�����)�����������������������#������������0�������������������������������������������������������������������������8��������#������������#�0�����#����(���9���������������������!������������������#����(��1����+���#������������������������������+��,,,,�

5������������2/������2$�����)�������������������������#������������0���������������������������������������������0��)������������)�������������������������������������������������2/�����)������������2$�����)��������'���1'����,�

�!���"!&���� 9� � �2/=�2$� ����)���� ����)���� ���������������� ��� ���� �������� �������� ��� ����� ���������� �� ������� ���� ������������������ ����+#�����)������������������������+�������������������#���0���+���������������������������������������0����,�

�",&"�'�!(079��$�����������������0��(#����������0��(#��+�0����������������#���������������������#�����������:�������#�

������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9�

��0��� �$������9���%�/!��<�= �,��"���9�.�0����������������������������������������,� © Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 66: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

���������9�8�

����

��

8���

�����������4�����4�������������49����������

������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ��������������������������*�������(��)��������������������

������������ ���������L����������,��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

��&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ����%���"�'� � �� ����!� "�'� �!����"�'�

�/�'������������������������������������������������������������������������������������������������� -�

����'�����,�

�������������������������������=��������0�����'������������:�������(��������������������

�����������������������������������������������������:������������)�������������������������B�,� � � � � � ���-�

6�����������)�����'�������'���'����������������(������������������������������������+��������� -�

����+���������)�������������,��

���4������ ��������������������0� �

�������������'���������������������������������������������������������:����!�����������������'������������������������'�����������������������������������,�

6������������������������������������������������)��������������������������������������������+�)��(#�

���������������������������������0+���0�����������,�

6���������#��������������������������������������K���������+�)����M��

�����0�����'��)��(,�

���

����556��

���7��������#�)�����������#���1������������

����������������

������

4����!&����!�.�

��� �� ��

���(�&���7�0����9�� �5� �5�

%����������������������)�������������=����������������I���������������������������������)������+�����+#���'����������?��������������

����������������+��������������������,�

��!$0"�'���$����� !�"����

$������������������������������8�����������#�������������#����������#�����������#��+������#����,9����)������������������1������������

)��(������0�����'������,��������������

��(�$"%"$��� !&"�"��;�

%����������������0�����������I���)����K���������+�)����M����������������������������������)����������#�����������������������,��5�����

�����������������������������������������������������������������������������������'������������������������������:�������#������#�'������

����������������������������+�������������������8�������#�������������0���������#����,9�

�!���"!&���� 9� ��2/=�2$�����)��������)���� ������������������� ����������������������� ���������������������������� ������������������

����+#�����)������������������������+�������������������#���0���+���������������������������������������0����,�

�",&"�'�!(079�$�����������������0��(#����������0��(�#��+�0����������������#���������������������#�����������:�������#�����������������

:��������8��������5�������������%�����������#�&>@�����A��'����,,,9�

��0��� �$������9���%�/!��<�= �,��"���9�. �0����������������������������������������

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 67: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�����

MODULE: Production General presentation. Except in the case of highly complex machines, graduates with a DUT in Mechanical and Production Engineering are not intended to be operators. Students with a DUT in Mechanical and Production Engineering must know a large range of production means, the physical phenomena they produce, their performances and limits, and their specific constraints.

At the DUT level, production will be considered as:

•� A tool for designing and tolerancing assemblies or parts realistically in full knowledge of the technical difficulties caused by the envisaged production means,

•� A discipline for materializing and visualising technical solutions proposed by the research department and the methods department,

•� A field of application for organisation methods used in a production workshop. In parallel, the student is trained in the implementation of complex machines and computer-assisted programming techniques.

Teaching methods.

Production allows students to understand a wide range of manufacturing means. The material resources available within the Mechanical and Production Engineering department may prove insufficient; a significant proportion of the courses are then conducted in the form of company visits, conferences, visits to fairs. Coordination between designers, methods technicians and manufacturers is highlighted in this course module taught jointly by design, methods and production teaching staff.

At the end of the course, the student is able to:

•� Know the fields of use of the various processes for producing metal and non-metal parts, •� Analyse productions from conventional machines and optimise the production parameters, •� Implement non-conventional machines and know the influence parameters, •� Write a program in ISO language and implement numerically-controlled machines, •� Use CAM software, •� Implement a workstation in view of mass production (adjustments, controls, validation, and

production launch).

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 68: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�������

Summary No.

PRODUCTION Title of course summaries L T P

Industrialisation: product production

F123.2

S1

processes. Understanding and explaining product production processes other than machining.

Production on conventional machines.

3 4 8

F125 Preparing and implementing simple production means in a global product development process. Realization of simple parts and critical analysis

4 6 20

Implementation of production

means. F224 Understanding the main processes for

producing mechanical parts: S2 fields of use, related physical phenomena.

Implementing processes other than chip removal.

Implementation of a simple machining cell.

F225 ISO principles of operation, adjustment and programming for numerically-controlled machines

Preparation of CAM production. Implementing a numerically-controlled machine from data in a CAM system.

4 6 20 4 6 20

S3 F325

S4 F424

Creating a production procedure for complex kinematic machines. Critical analysis of the results

Mass industrialisation. Implementing various machines for mass production. Implementing a workstation. Conducting a performance follow-up and analysis of production indicators.

4 6 20

10 20

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 69: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��

��������9��� ���;��

���������������9���� �$��(�� �$�"���(��$������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+��������

������

%���������)����0��������������)���������������������������

���������� ���������8E��������/����)����9,��

��!�2�����������������8E��������/����)����9#� �!�

$��������#� ��!�6����������������������)�������������>��

������+���,�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

������

��&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������� ����!� "�'� �!����"�'�

���"��)�����������������������������'������������������������������������������,� �� -�� ��4B����������������������������������������������������������,� �� -�� �

�/�������������������������������������8��9�8�����������B������9�����(��)�������� � � � � ��� � � ����-��������������������� �

���4������ ��������������������0� �

��

��������8����#������������#������)�B��������#����,9,�� �������8��������#��B�������9,�� ������������8��������#��������#��B�������#��������,,,9,��.�������8����)������#������������)������#��������������0����)������,,,9,�

�@56�����56��

��7��������#�)�����������#���1����������������

�����������

�6��������8�������������������������������9,� �56�

�� �� ���

���(�&���7�0�����1%����0����� �$�"���(!��39�� �� 8� ?�

4����!&����!�.�

6����������������������������������������0���(��8������������9#��������������������,�5�������������������������������������

�'����0��,�%������������'��'�����?������������������?����������������

��!$0"�'���$����� !�"����

5�����������������������������������������������������+�)������������������������������ ��8$�������� ��������������9����� ���

8666�������9,�

5�����������������+�������'��������B������'������������������������������,�5������������0��������������������������0������������'����������

���������������������������������>��(��)�����������'��������������,�

%���������������0��������������������������������������B�����������������������,�%�������������)��(�����0�����������������������

�����������������,����������)�������������������������0����'��������������)�������0�����������������������������+������

���������,�5������������#������������������0�������������)������������������������������������������������+�)��������������������

�����+������������������������������������,�

�4���������)����0��������������)�������/����������������������*�������,����!$�"$!&�/��.�"��(�� �$�"���/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?�

��� ����;��

��(�$"%"$��� !&"�"���

������!&�/��."�'��"��9���%����������>�����������)��(���������������������������?������������������������������������������������8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9,,�

��!���"!&���� !��2���������������������0������������������'�����������������#������������������������������0��������������������������������������'����0��,��

�",&"�'�!(079��$���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9��

���0��� �$������9�2����������������)����������������������������85�������,,,9,��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 70: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ��@

������������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� %���������)����0�����������������������������)����

��������������������������������� ������� ��,��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

����&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����� ����!� "�'� �!����"�'�

6���������������������������������������������������0�������������'��������� � � ����������� � �-��������,� �

E����I�����������������������'���������������������������� �� -�� ��2���+����������0���������������'���������������������������������������������� �� -�� ��5����������������������������������0���������������������� �� -�� ��

���4������ ��������������������0� �

��

7�������������������)��(�������#��!%��7,� @6��

5��������������������������������'����������������������!��������#��������#���������,�5������������������������#�������*��������������������������������8����������������������������

����������9,�

@56��

�7��������#�)�����������#���1���������������������������

��������������������������������+�8����������!��������������#�����������,,,9� �@6�� ������������������:��������������*���#���������������������������������+���������,� �56��

�� �� ���

���(�&���7�0����9�� 8� :� �5�

4����!&����!�.�

%��������������������������+����'�������������)����(��)1��)���������������������������������������(��)��������������������

���������������������!�

•� 7�����������!������+#�*�����+#�)��(��������#�����#������0�����'��)��(#��

•� 2���+���!�����+���������'����0�������������������������������������������#����������#�

•� 2���B�������������������!��������������������#������I�����#��0���'��������������������������������������������#�

•� 70���'����������������������������0:����!��������#�)��(�������#������������#���������������'����#��

•� 70���'���������������������������������8��������������#�������������>���������������#����������,,,9#�

�� 70���'�����������+����������������8�������#�������#�'�0�������,,,9,�

���!$0"�'���$����� !�"����

%����������������0�������������)������������������������������������������������+����������������������1�����������)�����

��������������������+������������������������������������,�

%����������������������0�������������+������������0������������������������+�����������������������0+���������������0:����'��,�

��!$�"$!&�/��.�/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?����� ����;,�

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9���%����������>�����������)��(���������������������������?��������������������������������������������8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9��

��!���"!&���� !��2���������������������0������������������'�����������������#������������������������������0������������������������������������'����0��,�

�",&"�'�!(079��$���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

���0��� �$������9�2����������������)����������������������������85�������,,,9,���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 71: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��

��������9���� ��8

��������������� ���������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ������� ��,��

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

��

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'���������� ����!� "�'� �!����"�'�

�����@��������������������������������������������������������������!��������������#�� � � ������������ � ���-�����������+���������������#���������������������#,,,� �

5�������������������������������8��9����������������������,� �� -�� ��

���4������ ��������������������0� �

��

%��������+��������������������������������������'��,� �56��6�������������������������������������� @56�� ���+��������������������������������������������������������*�����+����������������������,� �56�

��7��������#�)�����������#���1����������������

�����������

��

�� �� ���

���(�&���7�0����9�� 8� :� �5�

4����!&����!�.�

%����������������'�������������)������������(��)������������1���'������������������!�

•� ������������������������#�

•� $���������+��������������������0���'���������������������������#�

•� ���������������#��������������#��

•� 70���'��������������������������������,�%�����������������0��'��+�'����������������������������������'����0���8�������#��������#���������������#�������������+����#�

�+����������#����������#�������������#������������������������������������#���0���������������0�+,,,9,� �����������������#�������

�������0��������������������������0�������������������������'�������������������������������������������>��(��)�����������'����

����������,�

���!$0"�'���$����� !�"����

��!$�"$!&�/��.�/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?���� ����;�����������

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9���%����������>�����������)��(���������������������������?��������������������������������������������

8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9,�

��!���"!&���� !��2���������������������0������������������'�����������������#������������������������������0����������������������������������,�

�",&"�'�!(079��$���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

���0��� �$������9�2����������������)����������������������������85�������,,,9,���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 72: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ��@

��������������� ����������������4��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� $���������������*�����������'�����������������!� ��,���������������������������������!� ��,�

�����������������������������������+!� ��,��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'�������� ����!� "�'� �!����"�'�

�@��������������������������������������������������+1��������������������8�������#���������,,,9#�����(��������������0����������������������������������������� -�

. �������������������������������������5 7���������,� �� -�� ��

5������������������������+1������������������,� �� -�� ��

.��������������������������������0���������������������� �� -�� ��

���4������ ��������������������0� �

��

/���������������'����������������������������8���������I�����9,� �56��

6�����������������������������������������������5 7���������,� �56��5�������������������������,� �56�

������������������:��������������*����8�������������������������������������9,� �56�

���7��������#�)�����������#���1����������������

������������

��

�� �� ���

���(�&���7�0����9� 8� :� �5�

4����!&����!�.�

�%����������������'�������������)������������(��)�������������������+1�������������������!�• $�����I�����#��������#������������,,,�• 2���+�����������������������������������1������������������������$H%�����������8��������������+��������������������

���������9#��

• �������������������������������������������)���1���������������0�����������������,�@�����������������������������

����������#������#��������������������������������������:��������

@���������������������������������������#������#������������������������������������

��:�������,�

���!$0"�'���$����� !�"����%����0���� �&�;�

��!$�"$!&�/��.�/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?�

��� ����;�������

��(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��%����������>�����������)��(���������������������������?��������������������������������������������8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9,�

��!���"!&���� 9��A���������+1�����������$�������,�6��1��:��������0����,�A��������1������������������,�

�",&"�'�!(079��$���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,,�

���0��� �$������9�2����������������)����������������������������85�������,,,9,�

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 73: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ��@

������������� ��������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� 6����������������*������������������+1�������������������,�

@���������2/��+����,�

�����

��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'��������� ����!� "�'� �!����"�'�

�5������������������������+1��������������������������������������2$��+����,� -�

�����������������������������������������������������������������)����������B�(���������,� -�

4'����������������������+���������0������������#�����+��������������������������������0���'��������

���������������'���������������������,� � � � � � � � � � � � � ����-��

���4������ ��������������������0� �

/�����������������������������������������8���������������#�����������������������#��

�����������������������,,,9��� � � � � � � � � � � ������������ � � � � � �������@6��

6����������,� �@6��5�������������������������,� �@6��6������������������������'�����������������������������������������������,� �56��6���������������������������������,� �@6�

����

7��������#�)�����������#���1����������������

������������

���

�� �� ���

���(�&���7�0����9� 8� :� �5�

4����!&����!�.�

%�����������������������������������+1�������������������!�������1�B����������#�������1�B�����������������������������,��

���!$0"�'���$����� !�"����

%����������������'�������������)������1������(��)�������������������+1��������������������0+������������+��������������

��������������+��������)���������������������+��+��������������!�

• "�������������+���������������������������������#�• $���������+��������������������0���'��������������������������������#�• 70���'�������������������������������#�• �2$�)��(����������#����������������1����������,�

�������������������+����������#�����������������0������������)���������1�������������������������,�%�������+����������B�

�����1�B�����������������0������������0+���������������'�������������+,�

�����������������������0����������)���������������������������������������������� ���86���������+���������������9�

���!$�"$!&�/��.�/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?���� ����;����

��(�$"%"$��� !&"�"���

������!&�/��."�'��"��9����%����������>�����������)��(���������������������������?��������������������������������������������8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9,�

�!���"!&���� !��A���������+1�����������$�������,��2$�����)���,�6��1��:��������0����,��

�",&"�'�!(079��$���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9�

���0��� �$������9�2����������������)����������������������������85�������,,,9,�

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 74: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9��8�

����

8�8��������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� $ 6��������8 �9,� ��������������������������*�������(��)�����������������������������

�����������������#���������������������+���������������������� �

L� �,��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������� ����!� "�'� �!����"�'�

�5����������������������������������������,� �� -�� �

5��������������)��(��������8��:������������������������������9,� �� -�� ��

6������������������������������)1���,��2���+�������������������������������� � � � � � ���� � � �����-�8������I�������������0�����������������������#���������������������#���������'�������������,,,9� �

���4������ ��������������������0� �

��

6����������������2$�)��(,� �56��5�����������������������������������)��(�������,� �56��&����������'������������������������)�������������������8$ 69,� �56�

$�������������������+����������������������+������������8������I�������������������#����������������������#���������'�������������,� �56�

���

7��������#��)�����������#���1����������������

��������������

�� �� ���

���(�&���7�0����9�� �5� �5�

4����!&����!�.�

%����������������'�������������)������1������(��)�����������������������������0+������������+����������������������������+����

����)���������������������+��+��������������,�%�������������������������������������������>��)��������������������������������

���������������������������)��(�������,�

• 6��������������������������#�• 70��������������������������������������*�����+��������������#�• 6������������������������������#�

• ���+�������������������������,�%��������������'���+����������������)��������������������������8���������#��������,,,9������������������

�0:����'��,�4B����������������!�

• $���������������������������������������������������#�������������������������������I�����������������������

���,,,�• 5��������������������������������#�������������������������������,,,�• $���������+��������������������I����������������������������������������������������)��0���������������������������������

�)����������)������������������������,,,�• 6�������������������������������)��������������I��������������,,,�• $���������+���������������������������������������B�������8�����9,�

6�������������������������������8������#�'�0�������#������������,,,9�

��!$0"�'���$����� !�"����

��!$�"$!&�/��.�/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?��

��� ����;���

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9���%����������>�����������)��(���������������������������?��������������������������������������������8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9,�

�!���"!&���� 9�� A���������+1�����������$��������������������������������'����0��,�$�������������)����0��������������������

��������������'�������������������������������������������,�

$������������0����,�$ 6�����)���,�

�",&"�'�!(079��$���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

��0��� �$������9�2����������������)����������������������������85�������,,,9,��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 75: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�MODULE: Planning

Objectives Holders of a DUT in Mechanical and Production Engineering are able to integrate a methods department in companies operating in varied sectors of activity.

In this context, at the end of his studies, DUT students are able to: •� Know the various production processes and their characteristics, •� Analyse and interpret specifications and the constraints derived from product definition in view of

performing manufacturing dimensioning, �� Define a production process and a pilot procedure project with evaluation of means, •� Choose the production, mounting and assembly means depending on the product

characteristics on the one hand and depending on the company’s internal or external production means on the other. This choice integrates the quality, cost and deadline constraints,

•� Determine the chronology of the manufacturing phases, •� Prepare a phase sheet and optimise the manufacturing parameters, •� Propose modifications to the research department, •� Create equipment for improving productivity, •� Create an investment and profitability portfolio for equipment.

Teaching methods. The diversity of production processes is addressed and can be based on visits to companies and conferences. The relation with the research department and production is highlighted. A module taught simultaneously by design, methods and production teaching staff is planned to highlight and implement the necessary coordination between these various departments based on case studies. The teaching staff will extensively use computer resources (simulations).

����4

Summary No. Title of course summaries L T P

Product production processes.

F123.1 Study of processes other than chip removal. Processes for the production of blanks.

Introduction to manufacturing processes. S1 Classifying the various types of production.

3 4 8

F124

Identifying and understanding the stages of product transformation. Interpreting the indications in a definition file (quantity, rates...).

From product definition to the process.

3 12

S2 F223 Choosing various part production techniques by integrating the nature of the materials, the manufacturing program and the costs. Phase study and simulation. Optimisation of costs

6 12 12

F324 S3

Industrialising a product manufactured as a single unit or in volume.

Industrialisation and complex processes.

6 12 12

F423 Analysis of production constraints. Defining a complex procedure. Study in a Digital Chain context.

Participating in the “designing, industrialising,

6 12 12

S4 F421.2

producing” stages that lead to the realization of a product. Simultaneous engineering.

2.5 20

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 76: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

��������9���� ���;�

�������9���������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+��������

������

%���������)����0�����������������������������

)������������������������������������� ���

���� ��8E��������/����)����9#�

��!�2�����������������8E��������/�

���)����9#� �#� ���86669,,��

�,-�$�"#���"���������%�&�#�&�����$��(����$"����������!� �.��/)0�/�1(��%���"��!&"2!�"��3�

�����

�&�'������(��)��������*���������

� ��%���"�'��������� ����!� "�'� �!����"�'�

�@��������������������������������������'������������������������������������������,� �� -�� ��4B��������������������������������������������������������������� �� -�� �

/�������������������������������������8��9�8�����������B������9�����(��)��������

�������������������,�-�

���4������ �����������������

���0� ��

��������8����#������������#������)�B��������,,,9,��

�������8��������#��B�������9�� ������������8��������#��������#��B�������#��������,,,9��.�������8����)������#������������)������#��������������0����)������,,,9,�

�@56�����56��

����7��������#�)�����������#���1����������������������������

��

6��������8�������������������������������9,,� �56� ��

�� �� ���

���(�&���7�0����9�� �� 8� ?�

4����!&����!�.�

6����������������������������������������0���(��8������������9#��������������������,�5�������������������������������������

�'����0��,�%���������������������?������������8��?������������������������������������������������9,�

��!$0"�'���$����� !�"����

5�����������������������������������������������������+�)��������������������������������������������� ��8$�������� ��������

������9����� ���8666�������9,�

5�����������������+�������'��������B������'������������������������������,�5������������0��������������������������0����������

��'�������������������������������������������>��(��)�����������'��������������,�

%���������������0��������������������������������������B�����������������������,�%�������������)��(�����0�����������������������

�����������������,����������)�������������������������0����'��������������)�������0�����������������������������+���������������,�

5������������#������������������0�������������)������������������������������������������������+�)�������������������������+�������

�����������������������������,�

��!$0�(&!��/"&&�,��!$$��(!�"� �/"�0�!���"�!'���%��0��(!���"��*����"��;��

��!$�"$!&�/��.�"��(�� �$�"���/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?�

��� ����;���

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��%����������>�����������)��(���������������������������?��������������������������������������������8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9,�

,�

�!���"!&���� !��2���������������������0������������������'�����������������#������������������������������0������������������������������������'����0��,,�

�",&"�'�!(079�� $���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

��0��� �$������9�2����������������)����������������������������85�������,,,9,,��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 77: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ��8

��������������������� ������4���������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+��������

������

%���������)����0��������������)����������������

��������������������� �������H6 #� �������

������������,� ������ ���8E��������/�

���)����9,�

��!�2�����������������8E��������/�

���)����������������������������������9��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

������

���&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'��������� ����!� "�'� �!����"�'���������+��������'��������+�����������������,� �� -�� �����@�����������������'���������������������������������������,,� �� -�� ��

5�������������������������������������������������8*������+#�����,,,9�����������������������������������������������,,� -�

���4������ ��������������������0� �

2���+�������������������������������������������������������������������������������!�

���������+#�������������������������#�������������������������#�����������������������

8*������+#�����#,,,9,�

�856��

������������������������������������������!����������+#��������+#�����������,� �56��

$��������������������#��������������������:���#���'�����������������,�5������������������������������������������,� �56�

7��������#�)������������������1�����������,���

��� �� ��

���(�&���7�0����9� �� ���

4����!&����!�.���

���!$0"�'���$����� !�"����

�,�

�����������

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��%����������>�����������)��(���������������������������?��������������������������������������������8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9�

��!���"!&���� !��

�",&"�'�!(079�� $���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

���0��� �$������9�2����������������)����������������������������85�������,,,9,�

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 78: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ���

�������9� ������������ ����������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ��!�C������������������������,� ��#� ������� ���

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'��������� ����!� "�'� �!����"�'�

����������'�������������*�������������������������������������������0+����������������������������������������������������������������������������-��������������#��������������������������#���������������������������������������������������� �4'����������������������������������������*�����+�������������,� �� -�� ��

���4������ ��������������������0� �

��

2���+���������������������������������)������������������������������,,� �5% 2���+��������������������������������������������������������������������������� �5%

6��������������+,��������������������#������#��*�����������������������,�2���������� � ����������856������������� �

�����������������+!��B������������������#�������������������������������������#�����������

������������#��'����������������������J�������������������������#��������#�

���

�7��������#�

)�����������#���1

����������������

������������

��������#�0�����#��������J����������������������������8�����������������������������������

���������,,,9,,�

85% �� �� ��

���(�&���7�0����9�� :� ��� ���

4����!&����!�.�

4��0���������������������������������#����������������������*�������#����������������������������������������#�

������������������+����������������#�����+�������������������������#�������������������������#�������������������+��������

������,����

��!$0"�'���$����� !�"����

6���������)��(�)�����B�����'������������������'��'�������(����*�������������������������'�����'��+�����������,�����������

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�%����������>�����������)��(���������������������������?��������������������������������������������

8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9,�

��!���"!&���� !��%��������������������0�����������������������������������

�",&"�'�!(079�� $���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

���0��� �$������9�2����������������)����������������������������85�������,,,9,�

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 79: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��

��������9���� ��8

����������A������������<������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ���#� �������� ���,��

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

��

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��������� ����!� "�'� �!����"�'�

5�������������������������������������������������������������'������ �� -�� ��/����������)������������������������������������������������������������������ �� -�� ��

���4������ ��������������������0� �

��

6���������+���#�7�������������������������������������������,,� �56��4'����������������������������������������������������,� �56��$�������������������������,� �56�� ���+���������#�)��(������������+,� �56�

���7��������#�)�����������#���1����������������

������������

��

�� �� ���

���(�&���7�0����9�� :� ��� ���

4����!&����!�.�

��������������������)���#��������������������������������������+�������������������������+�)����������������������

���������������������������'��)�������������������,�%���������������������������������������0����'���������8���������#�

�������#��������#���:������,,,9,�%��������+����������������������������������������������������������������������������������������

����1������������8�������������#�)������#������0�+#,,,9,�

��!$0"�'���$����� !�"����

��!$�"$!&�/��.�/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?���� ����;��

��������������

��(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��%����������>�����������)��(���������������������������?��������������������������������������������

8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9,�

��!���"!&���� !��%��������������������0����������������������������������,,�

��",&"�'�!(079�� $���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

���0��� �$������9�2����������������)����������������������������85�������,,,,9�,���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 80: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

���������9��8�

���

��

8���

���������������� ��������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)�

��+�������� ��������������������������*�������(��)�����������������������������

�����������������#���������������������+���������������������� �L�

�,�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����������� ����!� "�'� �!����"�'�

�/������������������������������������������)������������B����������,� �� -�� ��2���+���������'�����������������������������,� �� -�� �

/������������������������������������������+�����������������������������������������������������������������0��������������� -�

���4������ ��������������������0� �

C���(����������������������8�������#���������#�������������'����������������#�)������,,,9,,��

$�������������������8�����������������#�0��������#��������#���������������,,,9���2����0�+���������8)��������)�#���������#���������(���#�0������,,,9,���5���������������������������������������������������������������,�� ���������8������������#���������#����'���#,,9�

5�������������������������������������������+�������������������������������������������������

���������������0��������������,�

,�

��@56�����

�@56�

�7��������#�)�����������#���1�����������������������������

�� �� ���

���(�&���7�0����9�� :� ��� ���

4����!&����!�.�

%���������������0����������������+�������'��������������������>�(��)���������������(���������������������������������

����������������������������������������������>����������������������'��������,�

%���(��)��������*�����������0�������������+�������������������)���������������������������������������������������+��������

���������������������*���������������'��,�

���%���������������0��������!�

• 5���������������������������������#��

• C+��������������0�����������������������������#�• C+�����+�����������������,�

,� � � � � � ��!$0"�'���$����� !�"����

%����������������)���������)�����������������������������������'��������������������������������������������������

������������������������������������������B����������,�

���!$�"$!&�/��.�/"�0��D(���"#���!���"!&��!� �"�#�&#"�'��"�.����*�"�"�'����������������(��#"����#��7�?���� ����;�

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��%����������>�����������)��(���������������������������?��������������������������������������������

8�������������������������������'���������������1����������9�������?��������������������������������8����������������)������������������9�

��!���"!&���� !��2���������������������0������������������'�����������������#�����������������������0������������������������������������'����0��,,��",&"�'�!(079�� $���������������������0��(�#����������0��(�#���������������������#�������������������#���������������������#�

����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9�

��0��� �$������9�2����������������)����������������������������85�������,,,9,�

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005�

Page 81: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�������!���� � � � � � � � � 8��;��

���A������4������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

������)��+��������

�������

•� "��)���������������������������������2/�����,�

•� /��������������������������������������������������������������������������

•� "��)������������������2$�����,�•� $��������������������������

•� 6���������������������������������������������������������

•� "��)������������������������������������������������)���,�

•� %�����������������������������'�����$����������4�����������5��6�������/����������������������,�

•� %�����������������������������'�����$����������6��������������������������,�

������

&�'������(��)������

��������������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"����

��*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� �������%���"�'���� ����!� "�'��!����"�'�

6��'����������(��)��������������+�����������������������������*�����������������������������������������������������������������������!�������������������,� -�

6��������������������K���������#����������������#����������M��������������������������B����������������������������������������������,� -�

@���������������������������������'�����������������������������������������������������������0�����������������������������������������������������������������������������+,� -�

��)���������������������������������0�����������������������������������������������������������������

������+>�����������������'��+,,�� � � � � � � � � � � � � � ������-�

5���������������������������������������K�����#����������#�*�����+M������+���0+��0���������������*������������������������������������������������)��������������������������)��(��������������+�8������������#�

������������������������������������9,�����-������

���4������ ��������������������0� �

+�������������������� ���� ��������%��%��������� ��������� ���������������������������� �� ���� ��������"�

������������ ���������%�"����������,�������� �������%�������� ������ ������ ����������������������������

�����������������

�+������������������ ����������������������������� ��-��������������������������������������

����������� ������� �������������������������

���+��������'�����������)������������*������8�2$#�����1����������#�����������������#��������������,,,9�

�%����������������������)������������������������������������������������������������������,�

H�����������������'��������������8����������9�������������0+�������������������8��9�8�������#�

������������#�������������9,�

�6������������������8'�����������������������������������#������������=��������������������#�����

������������������������#�,,,9,�

4��������������������������������������������������������,�

�()*�������

�@56��

����

������

�7��������#�)�����������#���1����������������������������������

�� �� ��

���(�&���7�0����9��1%����0�����0� ��(!��3� �;@� �5�

4����!&����!�.��5�����������0������������������������������)�����������������������������������������)����������������������������������0�����'��)��(�0��)����������������������������������������,�

��!$0"�'���$����� !�"�����5���������������������������������������������������������+�������)�����������������������������������������������0�+�������������������������+������0��������������0��(,�

�(�$"%"$��� !&"�"��;�5������������2/=�2$�����)�����������������������#������������0�������������������������������������������������������������������������8��������#������������#�0�����#����(���9���������������������!�����������������#����(��1����+���#������������������������������+��,,,�

5������������2/������2$�����)�������������������������#������������0���������������������������������������������0��)������������)�������������������������������������������������2/�����)������������2$�����)��������'���1'����,,�

�!���"!&���� 9� ��2/=�2$�����)��������)������������������������������������������������������������������������������������������������+#�����)������������������������+�������������������#���0���+���������������������������������������0�����

,�

�",&"�'�!(079��$�����������������0��(#����������0��(�#��+�0����������������#���������������������#�����������:�������#�����������������:��������8��������5�������������%�����������#�&>@�����A��'����,,,9�

���0��� �$������9���%�/!��<�= �,��"���9�.�0����������������������������������������,�

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 82: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�MODULE: Metrology

Objectives. Holders of a DUT in Mechanical and Production Engineering can integrate a Control department or a Metrology laboratory. They thus know how to read various common measuring devices and know their limits. They can identify the stages of production where controls are necessary and can set up an adapted control workstation. They also know how to use sophisticated (MMT) measurement devices, and interpret and prepare a measurement report.

Teaching methods. The metrology course is reinforced by the use of measurement and control devices in production practicals.

Statistical control is taught in close collaboration with the lecturer/tutor in charge of that discipline.

Summary No.

METROLOGY Title of course summaries L T P

Measurements and control.

Interpretation of the specifications in the S1 F126

GPS context. Use of simple measurement and control equipment.

Metrology.

3 4 8

S2 F226 Measurement reports. Implementation of MMT machines. Statistical control.

6 8 16

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 83: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ��:

�����������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+��������

�����

������� ��8E��������/����)����9,�

��!� 2���������� ������� 8E������� �/� ���)�����

���� ������������� ������������9,�%�� 0�� ������������

)��������������������������������+� ��,�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���!� �.��/)0�/�1(��%���"��!&"2!�"��3�

�����&�'������(��)��������*���������

��%���"�'����� ����!� "�'��!����"�'�

� �

5������+�����������������������������������������������'������������������������)���,� �� -�� ��. ������������������������������#��������������������������������,� �� -�� �

��������������������������0�����������������������*���,,� �� -�� ��

���4������ ��������������������0� �

��

1�5�������������������������������������������H6 ������B�,� :56��

1�@������������������������*�������#�����������������������#�)�������������������������������!!��

•� ������������������������'����!��������������#�����������#�O�

���7��������#�)�����������#���1����������������

�� ����������������������������������������#��

�� ���������������!������:���#�������������#�,,,�

�� $�����������������#�������1�+���������,�

856� ������������

��� �� ��

���(�&���7�0����9�� �� 8� ?�

4����!&����!�.�

�%��������������������������������������������������������������������������������������������+� ���������������'������+�

���������+�)��������������H6 �������������,�����

��!$0"�'���$����� !�"����

�������������������������������+�������#��������������������'����������������)�����������������+�����������

���������,�%��������������������������������������������������������������������,�

%������������������������B��������������������'��������'�������������������������������,��

��

�(�$"%"$��� !&"�"���

������!&� /��."�'� �"��9� � %��� �������>�� ��������� )��(���� ����� ��� ���������� ��� ��?� ��� ��������� ����� ��� ��������� ����

����������8�������������������������������'���������������1����������9�������?��������������������������������8����������������

)������������������9�

�!���"!&���� 9��2���������������������0��������������������������������������*����8�����0�'�9#�����������������������0��

����������������������������������'����0���

�",&"�'�!(079��$���������������������0��(�#����������0��(�#���������������������#�������������������#����������

�����������#�����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

����0��� �$������9�2����������������)����������������������������85�������,,,9,�

��������

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 84: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ��:

��������4A�

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� $�������������������������'�����+����������*��������

����

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������� ����!� "�'� �!����"�'�

�5������+����������������������������������������'������������������������)���,� ����-�����

�����������������������������������������1�����������������������������,� ����-�����

�. �������������������������,� ����-�����

�����������������������+����������������������������������������������������������*�����+�

�����'�������������,� -��

���4������ ������ ��������������0� ��

%��������+����%����1/�����������$���������$�������!����������������#��������+�

�����,,�

$�������������������������������������!�

•� $�����������������������������������������������������������#�

�� ������������������������������������������������������,�

�����������������������������������#������������)������������������������,�

���������������������������������������,�

�@5% �@6

7��������#�)�����������#���1�����������������������������

� ��

$���������������������������������,� �@% ����������I�����������������������'�����8�������+#����������#������0����+#��������0����+9,�E���������������������+������������������,,� �@%

������

�� �� ���

���(�&���7�0����9�� :� ?� �:�

4����!&����!�.�

%�����������������������������������������������+� ��J��������)�������������������������������������������������

���������������������������������������������������,�

%����������������(��)������������������$$%����������������������0���0��������������,�2������������������������#������������������0���0����������������I����������������'��������������I��������������������,�

���!$0"�'���$����� !�"����

�,�

�(�$"%"$��� !&"�"���

������!&� /��."�'� �"��9� � %��� �������>�� ��������� )��(���� ����� ��� ���������� ��� ��?� ��� ��������� ����� ��� ��������� ����

����������8�������������������������������'���������������1����������9�������?��������������������������������8����������������

)������������������9,�

��!���"!&���� !��%����1/�����������$���������$�������8A���������+1�����������������9������������������������������)���,�

E��������������,�

%��������������������0����������������������������������,�

�",&"�'�!(079��$���������������������0��(�#����������0��(�#���������������������#�������������������#����������

�����������#�����������:�������#�������������:��������8��������5�������������%�����������#��>@�����A��'����,,,9,�

��0��� �$������9�2����������������)����������������������������85�������,,,9,,��

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 85: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

���

MODULE: Electricity / Electronics / Automation General objectives.

Students with a DUT in Mechanical and Production Engineering are involved in designing, maintaining and using complete mechanical systems. For this reason, they must increasingly intervene on so-called “mechatronic’ systems, mainly in automated production systems consisting of an association of mechanical, electric, electronic and computerised components.

Power and control electronics components are seen as market sub-components: the student does not have to design them as such but he must be able to characterize them and identify the use that he can make of them. He is able to configure them, program them and integrate them into a system.

A graduate with a DUT in Mechanical and Production Engineering is able to adapt his mechanical engineering activity to the presence of electrotechnical/electronic components. In particular, he must:

•� Choose a motorization for a given problem: thermal, electric, hydraulic, pneumatic, •� Choose and integrate a standard control or instrumentation component and dialogue with

discipline specialists, •� Take account of environment constraints caused by the presence of electrical equipment

(degree of protection, electrical power, raceways, electromagnetic interferences...), •� Conduct a simulation of a sensor compatible with reliable operation, considering the chosen

technology, •� For the automation function, identify the needs, perform implementation in simple cases and

collaborate with specialists for more complex cases. He must be able to write “realistic” specifications,

•� For his research and/or methods department activity, be able to organise a production line; he must therefore be able to propose an automation solution to be implemented by integrating man/machine dialogue functions for use and maintenance.

General remark.

Insist on the economic consequences of the choices made.

Teaching recommendations.

Illustrate the various parts of the course with examples from mechatronic assemblies.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 86: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

����

ELECTRICITY / ELECTRONICS / AUTOMATION

����!�7��. Title of course summaries L T P

Basics of electricity: F127 Basics of electricity, with a selection of themes and

approaches adapted to mechanical engineering. S1 Basics of automation

F128 This is an introduction to the basics of automation (combinatory systems, sequential systems), introduction to sequential function charts and discovery of programmable controllers.

Electric motorization

This course provides the knowledge

3 6 6 3 6 6

F227

S2

F228

F326a

F326b

S3

essential for choosing a motor and a motor control to meet the motorization needs of a mechanical assembly

Automation of a workstation, safety rules

The aim of this course is to automate an independent workstation and therefore teach the standard automation techniques (combinatory and sequential systems, sequential function charts and programmable controllers) and to introduce machine safety rules. � Electronics for automation and instrumentation Introduces the basics of electronics that will be exploited in other subjects and are thus useful for a mechanical engineer.

Electronics for automation and instrumentation

Deals with the possibilities and limits of electronic modules and interconnection rules without analysing their structure in detail. Rem.: Motorization module to be studied before this electronics module.

6 12 12 5 13 12

3 6 6 3 6 6

Distributed automated systems

F327

S4 F425

Concerns the automation of installations consisting of cells that must cooperate, including man/machine dialogue elements. This is an introduction to modes of operation integrating machine safety .

Automation of a continuous digital system

Introduction to linear servocontrols and axis control.

4 10 16 2 4 9

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 87: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ��B

��������� �����������A�

���

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"��������)�

��+�������� @����#�������������������������������

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� �� ����!� "�'� �!����"�'�

E���������������������������������������������������������������������������������������������,� �� -�� ��5�������������������������������������'�����)�����������������������+������#�������������������������,� -��

���4������ ��������������������0� ��

��

C���������������������������8����#���������������#����������#��������+,,,9,� 5������������)���������������

������������,�

/��������������������������������������������������������������8���������������������#��������'��

������#�. ����������0�����#�����������������)�1�����������������#�"��������>����)�,,,9�

�56���

��

7��������#�)�����������#���1���������������

� 856� �����������

5�����������������������������������8�����������������B����������#�������B�����'���������

���������������,,,9,� 856��

�� �� ���

���(�&���7�0����9�� �� :� :�

4����!&����!�.�

%��������������+1�����������������������0�������������������+�����������)������������������������������������������������+��������

�����0��������������������������������������������������������������������������0�+,�

5������#��������������#��������������������������0�����(��)�����������)����0���B���������������K���������������I�����M�����

K����������������������������������������������M��������,��

��

��!$0"�'���$����� !�"����

�0"��$����������!�7� ��������"� "$!���!�$0����&�'7�%����0��$�����;�����������

��

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�������������������������B��������������������������������������������������!���"!&���� 9��C���������������+���������!�����������������������8���������#�������������#����������9#�'����������������8/������2�9#�������������'�����8'��������#��������#�)�����������

�",&"�'�!(079��H�����������������+�0��(������/@%�����C% �83������%����������/������9����������

���0��� �$������9���%�/!��<�= �,��"���9�'�������442�. �0�������

��

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 88: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��

��������9���� ��B

����������������E�����

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� @����#��������������������������+�������������,� ����C�������������������+��

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'���� ����!� "�'� �!����"�'�

�E���������������������������������������������,� �� -�� ������������������������������#����������������������������������������������,� �� -�� �

��������������)�����������������)�������������������B�������I�������8�����������������������������������������(�9,� -�

���4������ ��������������������0� ��

5�����������������������������������8��������������0+����������������������9#�2��P��>���������#�

������������������������B��������#���������������B#�&������>����)�����&��I>����),��5���������������

������������������������������������������8�+��������9,�

����������������!� ��������������������������8�����������#�����������#����1���������'���������,,,9,�

���������'����������������������������#������������������#��������������1����1�*�����'�����#�

�������������)��������������0������,�

%����1�������+������80�������#�����1��������������,,,,9��

6�)����8��������#�����'������������'�#�<�����������#���)���������9,�

�7������������������������������8������1���������������1��������+���������#�/�#��������#�

0��������,,,9��������������������������������������������,�

���������������������������������������������������������������������#����������+��

����6����

���6������6��

������7��������#�

)�����������#���1

����������������

������������

�����

�� �� ��

���(�&���7�0����9�� :� ��� ���

4����!&����!�.�

%�������������������'������������������������)�����������������������������������������������������������

8���������������������9���������'��������������,�@��������������������>�����*��1���������'��������������+��0:����'�,�

%����������������������������������������������������������������������������������������������,�

4������������������������������������������'������������������������������������������������������������������0�������������)������������������������+������,��

��!$0"�'���$����� !�"����

%���������������������������0���������������������+������+�������������������������)����������������������������

�������������������������������������������#�������������������������������������������������������������������'��������B�,�

%������*��=���������'��������������0���������������������������,�"��)�����������>���������������������)��������0�������������������>���0:����'���0����������0������������������������������������������

���������>��������,�

$����������������������������)����0�������������������#����������+�)�������������������������������������������������*�����+�

�����������0+������������������������

�(�$"%"$��� !&"�"���

��0"��(!����%��0��$������"��!�F������$�G�%�����$0!�"$!&���'"����"�'�!� �!����!�"��H�$��� "�!�"���/"�0��0����!$0"�'���!%%�%���

�0���� "�$"(&"����"���0���%����������"!&;;��������!&�/��."�'��"��9�������������������������B������������������������������������������������

�!���"!&���� !��E����������������#������������������������������'�����

�",&"�'�!(079��H�����������������+�0��(������/@%�����C% �83������%����������/������9���������#�'�������442�. �0��������

�����0��� �$������9�����)���#�. �0������� © Ministry of National Education, Higher Education and Research SEPTEMBER 2005�

Page 89: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������������9����

��

��:!�

����������� ������������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� @����#��������������������������+�������������,� ����C�������������������+��

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3�1(!����!�!� �,3�� ��%���"�'������ ����!� "�'� �!����"�'�

@����#������������������������������������������������������������������������ � � � � � � � �����������*�������#��������+����������������������������������������8�,�,!�'�������#�������9,� � � � � � � �

-�

C������0������(��)������������������������������������������8�������������������9,�

-�

���4������ ��������������������0� ��

C���������������!����������+������������������/�����#�������������������������������!�������+���#����������#�

Q����,� )������������������,�

7���������������������8����������#�������#����������#������)��,,,9,�

�7��������#�

)�����������#�

��1������������

����

������������

���������������������� ��

���(�&���7�0����9�� �� ��������������:� :�

4����!&����!�.�1�!����!�!� �,3�

%��������������������������������������������������������������*�������J���)�'��#������������)������/@%����$��������������

6����������4�����������������0���0����������������*��������������+�������������������������������������0����,�

�"��)�������������'��������������������������������'����������+������������������������������������+��0:����'�,�

�������������������������������������������������������0:����!�

•� %�����������������������0���'�������������������'�������������������0������������������������������������������������

�������#��������*�������������������������,,,,�

�� %��������������������������������������0����#������������������������������������C���������������'��������������

�����������������������'����������������,�����

��!$0"�'���$����� !�"����

%�����������)�����������������������������������������������������������������>�������,� ��������)�������+�0�����������������������������������)������������#�������������0+����������������������������������������)���

���������8�������������������0�����������������������������������'�������9,�

%�����������'��������������������������#��������������������������������������������������������������������������������������

�����������������������������������������+������,����������

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�������������������������B������������������������������������������������

�!���"!&���� 9��� ������)����0��������������������������#���������������'�������������������#����������������������#��������������

�",&"�'�!(079��4�����������0��(������/@%�����C% �83������%����������/������9���������#�'�������442�. �0�������

���0��� �$������9���%�/!��<�= �,��"������

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 90: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��

��������9���� ��:,

������������ ����������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� @����#��������������������������+�������������� ����C�������������������+��

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��9�(!������!� ��3� ��%���"�'�������� ����!� "�'� �!����"�'�

�@����#��������������������������������������������������������������������������������*�������#��������+����������������������������������������8�,�,!�'�������#�������9,� -�

C������0������(��)������������������������������������������8�������������������9,,� -�

���4������ ��������������������0� ��

����1�������+����#�%����������������������������,�

�����������'����������'���������#������������������#�C������������,�

�7��������#�)�����������#���1����������������������������

��

����������������������� ���

���(�&���7�0�����%����0���� �&�9� �� ����������������:� :�

4����!&����!�.��1(!����!�!� �,3�

%��������������������������������������������������������������*�������J���)�'��#������������)������/@%����$��������������

6����������4����������������0���0����������������*��������������+�������������������������������������0����,�

�"��)�������������'��������������������������������'����������+������������������������������������+��0:����'�,�

�������������������������������������������������������0:����!�

•� %�����������������������0���'�������������������'�������������������0�������������������������������������������������������#�

�������*�������������������������,,,,�

�� %��������������������������������������0����#������������������������������������C���������������'��������������������������

�����������'�������������������

���!$0"�'���$����� !�"����%����0���� �&�;�

%�����������)�����������������������������������������������������������������>�������,� ��������)�������+�0�����������������������������������)������������#�������������0+����������������������������������������)���

���������8�������������������0�����������������������������������'�������9,�%�����������'��������������������������#����������������������������������������������������������������������������������������������������������������������������������������+�������

���

��(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�������������������������B������������������������������������������������

�!���"!&���� 9�� � ������)����0��������������������������#���������������'�������������������#����������������������#��������������

�",&"�'�!(079��4�����������0��(������/@%�8@��'�����+�%��������+�/������9�����C% �83������%����������/������9���������,,�

���0��� �$������9���%�/!��<�= �,��"���9�'�������442�������

����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 91: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

��

��������9���� ��?

���������� ������������

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)��+��������

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

��&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������ ����!� "�'� �!����"�'�

. ���������������������������+��������������������C��������B�������������������������������������������,� -�

5������+�������������>�������������+����0+���������������*����������������������,,� �� -�� �

5������������������������������*���������������������������1)��������������������������8��������������������0��������������99,� -�

���4������ ��������������������0� ��

�5������������������������������������������!� �C�����������0��#�����������#���������������#�

���0������+�������*�������������,�

�������������������������������������+����#��������'�������R�������������,�

������#�������������������������������+��������������������!� ��+�������������������������������������������

�@6����@6�

���7��������#�

)�����������#���1

����������������

�����������

�5���������������������������������������*������������������#���*�����������������������,,� �56�

5�����������������������������������������������������0�������������#�����������������������

��������,� �56��

�� �� ���

���(�&���7�0����9�� �� :� :�

4����!&����!�.��

%��������������������������������������������������0���������������������!�

•� �������������C��������*������������������*������������������������B���������#��

•� "��)���������0���������������������������8����������:��(�#��������#�����+�#�������0������������������������9#�

•� 5�����������������*�����������������������#�

•� 5�������������������������������#�

�� 6���������������������������+���,�

��!$0"�'���$����� !�"����

@�������������������������������'�������������'��+����'������������������������������,�6��'�����������������'��������������

��������������������8���������#��������#�����������#�����)���9,�

5���������������������)�����B����������������������������������������������������������������������,��

����������

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�������������������������B������������������������������������������������

�!���"!&���� 9�� � �0����������������������������#������������+������������������������������0����������������������������������'��

����,,�

�",&"�'�!(079��H�����������������+�0��(������/@%�����C% �83������%����������/������9���������,��

���0��� �$������9���%�/!��<�= �,��"���9�'�������442���������

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 92: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��

��������9���� ��?

������������ ���= ��C������<��� ��A�

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)��+�������� �

� ��������������� ���������������,� ��#�C�������������������,,�

4���������+���������������������������#� ������� ���,��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'���� ����!� "�'� �!����"�'�

$��������������0������+�������*��������0����������������+����,� �� -�� ��

/����������������������������������������)��(�������#�����������������������������������������������������������,�4�������������������������������������������������������������������������)��(�������,�

5������+�������������+����0�����������0+���������������������,� �� -�� ��

����������������������������������������������������+������)��(�������,� �� -�� �

�� -�� ��

����

���4������ �����������������������������������0� ��

/�����������������������*������������������#� �*�����������������������#� +����������������������#�

�����������������)���������,�

����������������������������������������������0�������������#��������������

��?���

���������#����������������������0������+�������*�������������������,� ��?��

� �

����+�����������������������������,� �?��

�6��������������������������������������������������������0��������������,� ��?�

3��������I�����*�����������������������,� �?�

7��������#�)�����������#���1����������������������������

��

�� �� ���

���(�&���7�0����9�� @� ��� ���

4����!&����!�.�

%�����������������)�������������������������������������)��(�������!�����������'�������������������������������������������������8����������:��(���������������������#�'�������������������������,,,9���������0+���������������������+�0����������������������������0����������������������������0�����������������������,�

%���������������������������������������������������������������������������+���������0���0�����������������������������0�����������0������+�������*�����������������,�

��

��!$0"�'���$����� !�"����

6��'�����������������'����������������������������������8���������#��������#����������0��������������#�����)���9,��

5���������������������)�����B����������������������������������������������������������������������,�5�������0��#������B����������'�����������������������)����0��������������������������������������'������������������������������

������������������0���'������0���'������,�%�+������'�����������������0���'��������������+���,��

@�������������������������������'�������������'��+����'�����������������������������,��

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��������������������������B�������������������������������������������������

�!���"!&���� 9�������������+������������������������������0����������������������������������'�������)�������������0�����8����

��������������9,,�

�",&"�'�!(079��2����������������������/@%�����C% �83������%����������/������9����������

��0��� �$������9���%�/!��<�= �,��"���9�'�������442�����������

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 93: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

���� �������!���� � � � � � � � � ��B�

� � � � � � � � ��������������������A�������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� �����������������������������������

�������,�

���!�2���������������)��(��������

��#� �������� ���!�4���������+����������������������������"���������,�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� �����%���"�'��������� ����!� "�'� �!����"�'�

$��������������������I�������������0�����0����������������+����� �� -�� ��

6�����������������������������������������������)��(��������0+���������������������������������������������+������,� 4������������������������������������������������������������+�����

,�

@������������#��������������������������������������������������������������������������

���������������������������8������0������������)��(#���������������������������������������9

���-��� ��

����-��� ��

��������#���������������������������������0�������������������������,,� ���-��� ��

���4������ ��������������������0� ��

�$������������������������������������������������8H����9��������������I���������������,,� �56��

� ����0��#���������������������0�����������������)��(�,� �56�

�6��������������������������������������������������������0������������8��������������������0���

�����������#�����������������,,,9���*���������B������������,,� �@6�

E�0�����!���'���������������������)���#����������������������������,���

�7��������#�

)�����������#�

��1������������

����

�����������

�5������������������0���������������8���������#�������=�������#��������������9#�6������������������0��,�

����+������,�

5��������������������'�������������=��������������������������������������������I���

�56��

����������0���������������������������,,� �@6��

�� �� ����

���(�&���7�0����9�� 8� �5� �:�

4����!&����!�.�

%���������������0�������B������������������������������������������B������������+������������)�������������)��(��������#�

��������������)���������������������������������I��,��

3������0������������������������������������������������������������������������������*������������������������������

�������1���������������������,�%��������������������������������������)����������������������)��������������,�

��

��!$0"�'���$����� !�"����

6��'��������������������1��������������������������������������������������������������������������������������

8�,�,�0���������������#������������������#�K����������M������������������������������0��������������,,,9,�

/������������+��������������+������+���������������+����������������,�3���������������0�����������������������)������'��)���������+����)���������������������+����������,��5����������

�����������)�����B����������������������������������������������������������������������,�

@�������������������������������'�������������'��+����'���������������������������������

��

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�������������������������B������������������������������������������������

�!���"!&���� 9�� @�����������������������������)�������������0�������������8�9���������)��(�������0��8�9�)���������=��������

����������+����,,�

�",&"�'�!(079��2����������0��(������/@%�����C% �83������%����������/������9���������#�����5 7>��7 5����������,,��

���0��� �$������9���%�/!��<�= �,��"���9�'�������442������� © Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 94: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��������9��8� 8�@

������������ �������������4������A�����

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���!�4��������������������������

���)��+��������

���

���!�/�����0����������������+������ ������� ���!�4���������+���������������������������� ���!�4����������#�

��!�$������#�

��!�/+�������

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� �� ����!� "�'� �!����"�'�

@��������������������������������0��(������#��������������+����#������������������������������*����I��������������� -�

5������+��������������0�������=�������������������1��������������+����#���������������������������=����������,,� �� -�� ��

���4������ ��������������������0� ��

��'���������!����������������+�������+�����#����������������������������,�%�����������*����+�����������8C�����������9���������1����������������1�������+�����,�

�����������86#�65#�65/9!�����#��������#��������������0��(�����,�

����������������������B���8'������+���)�9#��B����+��������������8��������������'������9,� � �������������

��?�������?�

�7��������#�)�����������#���1���������������������������

,� �

�� �� ���

���(�&���7�0����9�� �� 8� >�

4����!&����!�.�

%�����������������)������������������������������������������+������������������������������,� �����������������'�1������������!������������������'����������������������������)����0�����(��)����������)�����������

���������������0���'��������������1��������������+�����������������+������������������������������,�

2�����������������������#��������0�����!�

•� 2��������������������I�����+����>��������������������������*����I����������������+�����#��

•� %�(�����������������������������������1��������������+��������������������������������#�

• 2����������������������������������0���������0�+����������0+���������1��������������+����,��

����

��!$0"�'���$����� !�"����

%�������������������������������������#�����'���������:��������*�����+�������������������*����I��������0���������������

���������������)���,�

4B�������������������������������������������������������������������'����������������������+�����0���'�����������,��

%�������������������������)������������������������������������0�����'�������)��������+�����+�����,�

%�����������������������B���)����0��������������������������������0���'��������������1��������������+���������

��������,�

��

������

�(�$"%"$��� !&"�"���

������!&�/��."�'��"��9�������������������������B������������������������������������������������

�!���"!&���� 9��������1��������������+�����#��������������0���������������B���

�",&"�'�!(079��2����������������������/@%�����C% �83������%����������/������9���������,��

��0��� �$������9���%�/!��<�= �,��"���9�'�������442�������© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 95: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�����������

CU 3: GENERAL AND MANAGERIAL EDUCATION

Semesters 1, 2, 3 and 4

- EXPRESSION AND COMMUNICATION

- FOREIGN LANGUAGE

- PERSONAL AND PROFESSIONAL PROJECT (PPP)

- MANAGEMENT

- ADAPTATION

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 96: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���������

��

MODULE: Expression and Communication Expression and communication is a course unit within the Mechanical and Production Engineering course programme that meets the integration needs of future technicians in professional, social, cultural and human environments. This course guarantees evolution towards senior managerial positions. It is a transversal module that provides methodologies necessary in all other subjects. It has, in particular, privileged relations with certain courses and certain activities (chronological, parallel, complementary work): Introduction to Social Sciences and Economics, languages, work placements and projects. However, this course is based on specific contents and trains students to be both critical receivers and active producers of sense and information.

General objectives. At the end of the second year, the student knows the fundamental elements of communication. He knows how to:

•� Research and use documentation, •� Make oral presentations with current materials, •� Produce professional and academic documents,

He is prepared for the challenge of finding a work placement and a job and is able to find his place in working life. He is trained in collaborative work and business communication. Teaching recommendations. The Expression and Communication course has been designed globally and is based on the various parts of the programme. Improving the student’s level of French is a constant concern. The lessons dealing with job search techniques and meeting coordination mainly take place in practicals. There are multiple assessment methods: in-class tests, practicals, tutorials, oral test, individual and/or collective assessment

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 97: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

EXPRESSION AND COMMUNICATION

Summary No.

Title of course summaries L T P

S1 F131

Fundamental elements of communication

Introduction to the fundamental elements of communication and the material and tools necessary for transmitting and researching information. Oral presentation with supporting materials. Development of language skills and general knowledge. University study methodology

Document production

15 15 15 15

S2 F231

Summary Methodology. Work on Argumentation. Reinforcement of language skills and general knowledge.

S3 F331

Professional integration

Professional integration (job and work placement search techniques, professional written and oral presentations. Academic written and oral presentations

15 15

Group business communication

5 10

S4 F431a Collaborative work in a company (meeting coordination, group

work). Analysis of the work placement: experience report.

Business communication

5 10

S4 F431b Internal and external business communication.

Professional documents/

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 98: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

���������9����

���

��

����

����������������� ���������������

��� !�"���� ������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

��������)�

��+�������� C��������D�������*��'������*�������������

����)��������������(����B����������(������

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)������

��*���������!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������ ����!� "�'� �!����"�'�

"��)���������������������������������������������,� ����-���� ��

E���������������������(����,� �� -�� ��

@�����'����������������������������������������,,� �� -�� ��

E����������������������������������#� �� -�� �

/�'����������������(��)�����,,� �� -�� ��

���4������ ��������������������0� �

$���������+!�����1��(���#��(��1�������#�����������+���������#��������

�������������������������������������������������������85�%%9� � � ������������� � ���56��

��������������8���������������!�����(��=�����'��,,,9,� �56��

E�������������,� �56�

7�����������������)������������������������,�

@�����������������������)����� � � � � � � � � � � �������������56

��

��������������,� �56�

����7��������#�)�����������#���1���������������������������

��

���

�� �� ���

���(�&���7�0����9�� �������������@� �@������������������������������!&�/��."�'��"��9����������

��������������������(�$"%"$��� !&"�"��;�

�!���"!&���� 9��2����'���������������8'����������'����������:�����#���������#�'�����������,,,9#����������#�����������

��������������

�",&"�'�!(079��6�����������������������,,,���1������������,,,�

��0��� �$������9�7����������)���#������������������)���#�'���������)���#�5�������O,��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 99: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

���������9����

���

���)��+��������

��

����

�����������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�

(��)��*�"�"����

������*��'��������'���

��

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"����

�&�'������(��)������

��*���������!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������ ����!� "�'� �!����"�'�

�6������������������� �� -�� �

�2����������� �� -�� �

/�'���������������+�����������+�������������,� �� -�� ��

/�'��������������'��+,� �� -�� ��

E���������������������(����,,� �� -�� ��/�'����������������(��)�����,� �� -�� �

���4������ ��������������������0� �

/������������������,,�

�7����������)������������������������������������,�

�56��

82�������������8)������=����9,� �56��

�����+�����������+,� �56��

��������������,� �56��

������'��+�8����������+�����(���������������������������#�0������������,,,9� �56�

�7��������#�

)�����������#�

��1������������

����

������������

��

�� �� ���

���(�&���7�0����9�� � ��������������@� �@��

��������������������������!&�/��."�'��"��9�����������

����������������

��(�$"%"$��� !&"�"��;�

�!���"!&���� 9��2����'���������������8'����������'����������:�����#���������#�'�����������,,,9#����������#�����������

��������������

�",&"�'�!(079��6�����������������������,,,���1������������,,,�

���0��� �$������9�7����������)���#������������������)���#�'���������)���#�5�������,,��

���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 100: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9����

� ����

��� ���������������

����

��

����)��+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

�#�� ���

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'�������� ����!� "�'� �!����"�'�

&��(����������:�0#���)��(����������� �� -�� ��.������������������������������������������� �� -�� �

6������������������������������������������������������� �� -�� ��

�������������������1'��0��������������������������,,� �� -�� ��

���4������ ��������������������0� �

�<�0�����)��(������������������������*����8�;#��������#������#������'��)�#��������������

������������������������9,�

6�����������������������������������8�������=������������,,,9#�����������'���������������������

856��

�������������)������������������������������,� �@6�

�6��������������������������������������������8�����������������������������������,,,9,� �56��

2��������������1'��0����������������,� �@6�

7��������#�

)�����������#�

��1������������

����������������

��

�� �� ���

���(�&���7�0����9�� � �������������@� �@��������������������������������������!&�/��."�'��"��9����������

�����������������������������(�$"%"$��� !&"�"��;�

�!���"!&���� 9���2����'���������������8'����������'����������:�����#���������#�'�����������,,,9#����������#�����������

�������������;�

�",&"�'�!(079��6�����������������������,,,���1������������,,,�

���0��� �$������9�7����������)���#������������������)���#�'���������)���#�5�������,��© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 101: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9��8�

� �8��!�

��������������������

���

��

����)��+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

�#� ��#� ���

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

&�'������(��)������

��*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'�������� ����!� "�'��!����"<�'�

6����������������������)��(,� -��

��������������������� �� -�� ��

��

���4������ ��������������������0� �

+�����������8)������=����9����������#��+�������������� 856��

������������������������#�������)��(,� 856�

. ��(���������������0��(,� �56� �7��������#�)�����������#���1���������������������������

���

�� �� ���

���(�&���7�0����9�� � ��������������@� �5����������������������������������������!&�/��."�'��"��9����������

������������������������������(�$"%"$��� !&"�"���

�!���"!&���� 9���2����'���������������8'����������'����������:�����#���������#�'�����������#����,9#����������#�����������

���������������

�",&"�'�!(079��6�����������������������,,,���1������������,,,��)�������O�

��0��� �$������9�7����������)���#������������������)���#�'���������)���#�5�������,��

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 102: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

���������9��8�

��

���)��+��������

��

�8��,�

���������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

�#� ��#� ��#� ����

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)������

��*���������!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����� ����!� "�'� �!����"�'�

�6������������/���������8�����������#�O9,� �� -�� �

�5�������������B�������0���������������������,� �� -�� �

��

���4������ ��������������������0� �

6������������/���������8�����������#�O9,� 856��

5�������������B�������0���������������������� :56��

��

�7��������#�)�����������#���1����������������������������

���

�� �� ���

���(�&���7�0����9�� � ��������������@� �5���������������������������������������!&�/��."�'��"��9����������

������������������������������(�$"%"$��� !&"�"���

�!���"!&���� 9���2����'���������������8'����������'����������:�����#���������#�'�����������,,,9#����������#�����������

��������������

�",&"�'�!(079��6�����������������������,,,���1������������,,,��)�������O�

��0��� �$������9�7����������)���#������������������)���#�'���������)���#�5���������

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 103: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

�MODULE: Foreign language

General objectives to be achieved. Foreign language teaching at the IUT aims to provide students with an instrument for professional and general communication whose use has become essential due to the internationalisation of relations and to promote awareness of the cultures of the respective countries. 1. General language.

Students with a DUT in Mechanical and Production Engineering are able to: - Communicate generally and within the context of interpersonal relations:

•� Introduce themselves (first contacts...), telling the way, have an initial contact conversation, •� Conduct a telephone conversation. .

- Communicate on a professional level:

•� Look for a job: write a CV and covering letter, attend a job interview (explain their academic career and their professional project, answer questions),

•� Present / explain... e.g. a project: interaction with an audience, •� Know how to write an email, a memorandum, a summary, a report.

The student should be able to take cultural differences into account in addition to pure linguistic aspects.

2. Foreign Language (Technical): Progression of the bases to achieve a level of English that can be used in professional relations.

Basic technical vocabulary:

Including: the alphabet, numbers, names of tools, measurements, curves and graphs, expression of the functions (of tools), technical verbs, shapes, descriptions of objects, materials...

Spatial description and localization.

With: appropriate verbs and prepositions of movement and position. Understanding and writing simple instructions.

With: Imperatives. Descriptions of forces, simple and complex mechanisms.

Vocabulary of forces and stresses, expression of simultaneity, causes and consequences, hypotheses, the passive form.

Understanding and writing technical texts, translations and accounts of technical texts. With mainly: compound words, logical connectors.

With logical coordination with expression and communication and transversality to be achieved with the other subjects.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 104: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

Recommendations: The course makes use of the most various tools and resources (language laboratory, multimedia laboratory, video, DVD,...) to develop the four language skills: written and spoken expression, written and spoken comprehension. Work in small groups during practicals must favour individual written and spoken expression. It allows role-playing, conversation simulations and, more generally, constructive interactivity. The students must adopt an active approach as the acquisition of knowledge involves speaking in public and producing documents. In this context, working in coordination with the other subjects allows students to apply, transpose and complete techniques, methods or knowledge common to several subjects. A very obvious partnership can thus be formed with the other subjects (course preparation in a foreign language, conferences or lectures given by foreign participants, summaries...)..

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 105: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

FOREIGN LANGUAGE

Summary No.

Title of course summaries L T P

S1 F132

Foreign Language (General and Professional): Basics.

Presentation and initial contact, interpersonal communication. Describing a given space and spatial localization. Understanding and writing simple instructions. Telephone, level 1: simple communication. Basic technical vocabulary.

Foreign Language (Technical): Data Research and Transmission.

15 15

15 15

S2 F232 Foreign language communication techniques. Professional

communication, level 1 (emails / fax / memorandums / document production). Searching for information (note-taking, Internet). Mechanism descriptions and operation modes. Operation of mechanisms (machines, motors...)..).

Foreign Language (Technical and Professional): Writing and Informing

Professional communication, level 2 (search for a job / work placement / continuation of studies: CV, letters...).

15 15

S3 F332

Writing texts (operating instructions, summaries...). Technical translations or accounts of technical articles. Telephone, level 2: problem management and solutions. Discovering international civilisation (cultures).

F432a

S4

Foreign Language: Professional and Intercultural

Integration Simulation of job interviews. Explaining a

“process”. Discovering international civilisation.

Human relations (socializing).

Foreign Language: Advanced

8 7 7 8

F432b Oral presentation of a project. Study of a technical field.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 106: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

��� �������!��� � � � � � ������������������ ����

����������� ����4���4��4��1��������<�4����������� �������39���������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+��������

C��������D�����'��,��

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"����

��&�'������(��)������

��*���������!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'��������� ����!� "�'��!����"�'�

�2�*��������������������������������0�����������������������'��+��+������������������������������������,� ����-�����

����4������ ������

��6�������������������������������#����������������������������,,� �56�

��/�����0��������'���������������������������I�����,� �56�

�@�����������������)��������������������������,� �56��

�%��������#���'���!�0������������������,� �56��

C���������������'���0����+,� �56�

������������

���0� ���

���7��������#�

)�����������#�

��1������

����������

�������������

��

�� �� ���

���(�&���7�0����9�� �@� �@����������������������

��(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��2����B,���������8���������������������������>����'������������(��)�����9�

�!���"!&���� 9��2�������0�=��������������0�=�;�E�=�/;/�=�5�������,� @�������������������������������������������������,� �

5�� #���'�������������������������������������������������+,�� �'���������'�������+,�

�",&"�'�!(079��

��0��� �$������9������������)���#������������������)���#�'���������)���#�5�������,,,���

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 107: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9����

���

� ����

����4���4��4��1��������39�

���������������������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)

��*�"�"�����

����

������

���)�

��+�������� �������������������������������������������������������������������������� �����

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3����������������������������������������������������%���"�'� ����� ����!� "�'��!����"�'�

�&������������������������������������������#����������������'��,,� ����-�����

����4������ ������

��������������0� ��

� ������������������������������������*���,,� �56���6�������������������������#���'����8�������=���B�=�������������=��������������������9,� �56�

&��(��������������������8����1��(���#�5�������9,� �56��

/�����������������������������������'�����������������,� �56��

7������������'������������������8��������#�������,,,9� �56�

���7��������#�

)�����������#�

��1������������

����

�������������

��

�� �� ���

���(�&���7�0����9�� �@� �@��

��������������������������������������!&�/��."�'��"��9��������,�

������������������������

��(�$"%"$��� !&"�"���

�!���"!&���� 9��2�������0�=��������������0�=�;�E�=�/;/�=�5�������,�@�������������������������������������������������,�

�'���������'�������+,�

�",&"�'�!(079��

��0��� �$������9������������)���#������������������)���#�'���������)���#�. �0������,,,��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 108: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9����

� ����

����4���4��4��1�������������� �������39�

= ����4���� ����4�

�������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� �������������������������������������������������������������������������� ��#� ������

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

��&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� �� ����!� "�'� �!����"�'�

�2�*������������������������������������������������������������:���#�������������������������������

���������1��������������B�,� ���

���4������ ��������������������0� �

6�������������������������#���'�����8�������������:�0�=�)��(�����������=������������������������!��;#��

�������,,,9,�� � � � � � � � � �� � � � � � �������56��

�. ���������B���8����������������������#����������,,,9,,� �56��

�%�������������������������������������������������������,� �56��

%��������#���'����!����0����������������������������� �56��

�/����'����������������������'����������8��������9,� �56�

���7��������#�

)�����������#�

��1������

������

����

�������������

��

�� �� ���

���(�&���7�0����9�� �@� �@��

�����������������������������������!&�/��."�'��"��9����������

��������������������������(�$"%"$��� !&"�"���

�!���"!&���� �2�������0�=�$������������0�=�;�E�=�/;/�=�5�������,�@����������������������������������������

���������,� �'���������'�������+,�

�",&"�'�!(079��

���0��� �$������9������������)���#������������������)���#�'���������)���#�. �0������,,,��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 109: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����

��������9��8��

���

��

8��!� ����4���4��4�9�

��� ��������������������������4�������

��� !�"����������������������������������������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ��#� ���#� �����

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

��&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'���� ����!� "�'��!����"�'�

5����������������(��)��������*������)������'��)�������������������������������������������������������� -�

���4������ ��������������������0� �

� �������������:�0������'��)�,� �56�

4B�����������K�������M,� 856�

�3���������������8�������I���9,,� �56�

�/����'���������������������������,,� �56�

�7��������#�

)�����������#�

��1������

������

����

�����������

��

��

�� �� ���

���(�&���7�0����9�� ?� B��

�������������������������������������!&�/��."�'��"��9����������

���������������������������

��(�$"%"$��� !&"�"���

�!���"!&���� 9��2�������0�=��������������0�=�;�E�=�/;/�=�5�������,�@�������������������������������������������������,�

�'���������'�������+,�

�",&"�'�!(079��

���0��� �$������9������������)���#������������������)���#�'���������)���#�. �0������,,���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 110: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

�� �������!���� � � � � ����������������������������� 8���,�

����4���4��4�9��������

��� !�"����������������������������������������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� ��#� ���#� ���#� �����

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

��&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3�������������������������������������������������������%���"�'� ����� ����!� "�'��!����"�'�

�5����������������(��)��������*������)������'��)�������������������������������������������������������� -�

���4������ ��������������������0� �

7�������������������������:���� 856��

� ���+���������������������,� :56�

7��������#�)�����������#���1���������������������������

��� �� ��

���(�&���7�0����9�� B� ?��

��������������������������������������!&�/��."�'��"��9����������

����������������������������

���(�$"%"$��� !&"�"���

�!���"!&���� 9��2�������0�=��������������0�=�;�E�=�/;/�=�5�������,�@�������������������������������������������������,�

�'���������'�������+,�

�",&"�'�!(079��

��0��� �$������9������������)���#������������������)���#�'���������)���#�5��������O��

����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 111: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�MODULE: Personal and Professional Project (PPP)

Objectives. Students registered with the Mechanical and Production Engineering departments must be able to identify the jobs they can access after: •� After obtaining the DUT in Mechanical and Production Engineering, •� Short post-DUT studies, •� Long post-DUT studies.

In each of these cases, they must be able to determine the moral, intellectual, social and economic characteristics of each considered job.

They must master the self-assessment tools and methods to allow them to analyse their personal characteristics and must be able to check their adequation with the characteristics of the considered job with the help of their tutor.

After this analysis, they must be able to choose their desired career path with the help of their tutor.

Teaching methods. Firstly, students will be encouraged to examine simple products and list the different steps leading to their manufacturing. Secondly, a corresponding job should be associated to each design, production distribution and maintenance stage. Thirdly, it is important to concretely show how the various tasks are performed through company visits, conferences, and meetings with various participants presenting their jobs.

A self-evaluation method is taught in parallel. Finally, the students must elaborate their personal project and present it clearly.

These arrangements are characterized by the implementation of two modules and complemented by the semester 1 project that will be directly oriented to the PPP in order to reinforce students’ independence and personal work..

Summary No.

S1 F134

S2 F234

PERSONAL AND PROFESSIONAL PROJECT Title of course summaries L T P

Techniques and professions associated with a product’s life cycle

9 9 12 Functional analysis tools. Analysis of a product. The associated professions. Personal and Professional Project

5 10 Method of self-assessment and construction of an individual project.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 112: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��������9���� ��8

�����������I��������������� �����������J�����

��� !�"��������������������������������������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)��+����������

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

!� �.��/)0�/�1(��%���"��!&"2!�"��3�

��

�&�'������(��)��������*���������

��%���"�'� ����� ����!� "�'� �!����"�'��

/���������������������������������������1���:���,,� -�

/����'������������'��������(��)�������������)��������)��(�����0�������� -�

/�������������������������������������>�������������������������������:���,,� -��

���4������ ��������������������0� �

�$���������+����������������,� �?�

�4B���������������������������������������������1���:���,,�

�5����������#�E�������#�/�������������8)��������������������0��(9,�

�2������������������������������������'��)�������������+,�85���'�����������������'�9�������+�

'�����9,�

4B�����������������������>�������������������������������:���!�

•� +�������!�)�������������#�

•� 6�����������������������������������������������)��������������������������������������������������,,,,,�

��?���

���?�

E������#�

�������#�������

�����

��������������

����������,��

��� �� ��

���(�&���7�0����9�� @� �5�

4����!&����!�.�

�����������9��%���������������'�����������������������������#������������������������#��������������������������������������0��(�

��������������������8�������������������������������������9,�

��!$0"�'���$����� !�"�����

�6����������������������������1���:���!�2�(������������� ��� ���(��0��������������������:���� ��������������������������0��*�����+�

������� ��,� 5�������� ���� �������>�� ������������� ������(�������� ������������ ������(���� �������� ������+���������� 8�����'����� ���

�����0��9�)�������������������������������'��������������'������*������������,�

%�������������+������������0��������0�������������������������������+���#������)���0+����1����������������������������������������

0�������0�������������������'�������,�

%���������������0������������������������)���������B�����������������������������,�����������������

�(�$"%"$��� !&"�"���

2������������������������������������������>������������������0�����������������������������������������������������������

��������������

���(�&���7�(�����!&�/��."�'��"��9�2�������������������������������������������������#�������������#�'�������������

������+#�,,,������������+�����������0����������������������������'�����������0���������������������������,�

�!���"!&���� 9��2��������������������������

�",&"�'�!(079��%�������������:����������������������#�

���0��� �$������9���%�/!��<�= �,��"���9�

���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 113: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9���� � ��8�������+��������� �����������������= ������������I���� ���A����

���

����)��+��������

��� ��� !�"���

�����������������������������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

E�����������������������������������������

&�'������(��)��������*��������

�����������������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� �

!� �.��/)0�/�1(��%���"��!&"2!�"��3��������������������������������������������������%���"�'������� ����!� "�'���!����"�'�

6��������������������0�������������������������������)�������������>��������+���������������������������

�������>�������������������������������:���,,� -�

"��)����������������������������+����������8)��������������������9,� -�

2���+���������������0��������������������������������������������������'��)�����,� �� -�� ��

���4������ ��������������������0� �

5�������������������������������������������������+�����������,�2�����������������������������������

���������� ������������������� 2 %��������#,� � � � � � ���������� � � �����?�

���+�������������'���������+������������������0������������������������������)�������������>��

������+���#�������������������������������������������������)������������������������������������

'�����������������#�������������#�*�����+�������������������������������*���,�

��7��������#�

)�����������#�

��1������������

��������������

%����������������������'���0����+���������,��

%�����*�������������������������������)�������������>��������+���!��������������������

��?� ��

��������������������������1��1����,� ��?�

���(�&���7�0����9�� ������������������ ��

>� ������������>� ���

4����!&����!�.�

%����������#������������)��������������������������+� ���#���������'����������������#��)����������+���������������������������

���������������������#�)����(��)������������������������������������)��������������������������,�

��!$0"�'���$����� !�"�����%��������)������������������������0�����������������������������������������������������������������������+�����������!�

•� E���������������������������� ���������� �������������!��������+�������������+���������)���1��������������#����)�������

����������������������#�����������I������������������I��������������������������������������,�

•� �������'�������� ��'���� ������������%��������� ��������,�

•� %������������������'�����!�� �������������������������������������'����+���������������������������������������������������������0�������

�������������������������������������������������������������,�� ����+�������������#������������������������������'�����+�����,�

%������������#���������������B���������������������������B�#������������0������������������������������

���

�(�$"%"$��� !&"�"��;�

�%���� ������� ��*������ ���� ��������������� ��� (�!$�"$!&� /��.� ��� �!�"(�&!�"�'� ��$0!�"���� !� � !�� "���� �$�"��� ���

��$0��&�'7�8.���������%��������/9!� ����������������������������F�!$�"&�&7G��� ����!� �����������������������������������#�

�0���'�����#�����+���������������0�+�����'�����,�

������!&�/��."�'��"��9���E��������0���'�������������������������������������������>������+���'���������8��������������������#���������*�������#����������,,,9,�6���������������������������������������8�����#���������#�����������

������������9#����������������������������������,�

�!���"!&���� 9� � � � ��������� )��(������������ ����� � �������#� �� ����� �������� )���� ����������� ���������!� � ��������������� ����

�����0�����)����0�����������������#���+�����������������������������������0���������������+#���������������������������������,,,,,�

�",&"�'�!(079�� �$�����������������0��(�#����������0��(#��+�0����������������#�������������:��������8��������5��������������%�����������#��>@�����A��'����,,,9#���������'������������,�

���0��� �$������9���%�/!��<�= �,��"���9��2/���������#�����1������������B�������#�5A 44��8 ���������������5������������4������������ �����������5����������9�. �0�����,,,���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 114: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��

�MODULE: Management

Objectives. Whatever the profession chosen, a graduate with a DUT in Mechanical and Production Engineering Engineering is likely to integrate (or even coordinate) a team managing one or more projects. The student must thus be able to know and implement project management tools. Furthermore, these organisational methods will be applied to an individual approach in order to teach the student a structured method for personal work.

The student must understand the need for the rigorous organisation of activities in a company and know the organisational tools. He must know the tools used in Quality and Maintenance procedures and understand the economic and technical consequences of these factors.

In general, the student must know the structure of the company and its socio-economic environment in order to situate the action for which he is responsible within a company. Teaching methods. These various courses are based on case studies and are related to the other disciplines (design, methods, production...).

Summary No.

MANAGEMENT

Title of course summaries L T P Project Coordination and Management

S2 F233

F333

S3

Tools for analysing and solving organisational problems. Analysis, planning, implementation and validation of a project. Resource management.

Production Management The company’s functional structure. The production management concepts and production management models..

Quality and Maintenance

10 15 20 4 10 16

F334a

The Quality concept. The Quality issues. The certification procedure and operation of the Quality department.

5 4 6

F334b

Quality and Maintenance

The Maintenance issues. Maintenance tools. Preventive, corrective and conditional maintenance

Introduction to Economics and Social Studies

5 4 6

S4 F433

The company’s general organisation. The company’s legal structure and its contractual relations. General accounting principles. Concepts of budget and management analysis.

10 20

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 115: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9���� ���

�����J�������������������4�����

�����

���

���)��+��������

�����

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

�!�$���������������������������,� ��!�6�������������!�����+���������������������*���,�

���

��!�5����������������!�����������������������������,��

����&�'������(��)������

������������������������������,-�$�"#���"���������%�&�#�&�����$��(����$"��� ��*���������!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��� ����!� "�'� �!����"�'�

� ����������+�����+��������������������������������������������,� �� -�� �

�6�������#������������������'���������������:���,� �� -�� �

�"��)������������+�����������0���1���'���������,,� �� -�� �

� �����������������(����������:���,� �� -�� �

���4������ ��������������������0� �

��

6��:�������������������������+�������������,����6��:��������������������!�64E%#�H2A%%#����:������'��)�#�����������O���2���'��+#�����������������������������J��������������)��������)�����������)���������������

� �����������������������������;���������+���,�

�856����:56��

�7��������#�

)�����������#���1

����������������

������������

��

�� �� ���

���(�&���7�0����9�� �5� �@� �5�

4����!&����!�.�

%�������������������������������������������������,�

5����������'����������������)��������(��)��������!�

•� 2���+������������������>������������)������'��)����)���������������������#�

•� 2���+�����������'�����������������������������B�����������������������������#��

•� 2���+���#�������������������������������������:���#�

������H��������������������6��:����$����������

��!$0"�'���$����� !�"����

%����������������0��������������������������������������#�������+�������������#�������������������������'�������������0:���������)����

���������������)����������'��������������������������������+����,����������

��(�$"%"$��� !&"�"���

������!&�/��."�'��"��9��70���'�������������������������������������������>������+���'���������8��������������������#��������

�*�������#����������,,,9������������������������,�

�!���"!&���� 9��E������������)������������������������!�������������������������0�����)����0�����������������#���+���������

��������������������������0���������������+,�

;�����2���+��������)����0����������������������'�������'���������������������+�����

�",&"�'�!(079��$�����������������0��(#����������0��(�#��+�0����������������#���������������������#�����������:�������#�������������

:��������8��������5�������������%�����������#��>@�����A��'����,,,9�

��0��� �$������9�����)���#�. �0������!��2/���������#�����1������������B�������#��������������������������������8�����#��/����. �0�

����9�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 116: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��������9���� ���

��������������4������

��� !�"����

���#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"����

���)�

��+�������� �������������������������������������������#��������������������������������

��

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������� ����!� "�'� �!����"�'�

�"��)����������+�����������#�� �� -�� ��@��������������������������������������������������,� �� -�� ��@����������������������������������������������������������,� �� -�� ��

���4������ ��������������������0� �

��

�%������������������9����������������������������������,� �56��%���'����������)�������������������+����,� �56�

�6����������$���������������������������������0+����������+��������������������,��

���

�7��������#�)�����������#���1���������������������������

� ����$E6��������� ����+�������8$E6�#�<2%#�4E6#,,,9,���. ��(����������������8����������#�"��0��#�76%#�������,,,9,�

?56��

��

�� �� ���

���(�&���7�0����9�� 8� �5� �:�

4����!&����!�.��

���!$0"�'���$����� !�"����

����������������������!&�/��."�'��"��9��

��������������(�$"%"$��� !&"�"���

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9�����

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 117: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��������9���� ��8!

�+�����A������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)�

��+�������� 6��:��������������������������������8 ���9,��������������������������������������������#���������

����������������������,�

,��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��������� ����!� "�'� �!����"�'�

�"��)���������������������������������������*�����+�������� �� -�� ��@�������������������������������������������������*�����+������,,� �� -�� ��������

���4������ ��������������������0� �

��

�G�����+���������#�5 7���������������������,���G�����+�������������������������,���G�����+���������������������,�

%����������������������������'�������0����,�%�����*�����+������#��������������#������

��

�7��������#�)�����������#���1���������������������������

���

��������������������� ������(�&���7�0����9�� @� ����������������8� :�

4����!&����!�.��3�����������������������0��)����*�����+����������������#�����������#������������������������0�����������������,�

��!$0"�'���$����� !�"������������������������!&�/��."�'��"��9��

�������������(�$"%"$��� !&"�"���

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9������

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 118: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��������9���� ��8,

�+�����A������������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)��+�������� 6��:��������������������������������8 ���9,��������������������������������������������#���������

����������������������,�

,��

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��������� ����!� "�'� �!����"�'�

�"��)���������0:����'�������������������������������������������������������,� �� -�� �

@�����������������������������%�����6�������'��$�����������8%6$9���������+��������6�����#�64E%�����H2A%%������,,� -�

6�������������������2$/4������+�����������������������#����'����'��������������'���������������������,� -�

���4������ ��������������������0� �

�/����������#��0:����'��#��+�����������������,�,���%��������0���'�����������+����!�������������#��������������������,,���%�������������'��������������8%6$9,���2�������������������������������!�6�����#�2$/4�#�64E%#�H2A%%,��

��������'�������������!�������������������

�6��'����'�������������!�������+������������������������������������������8������������������#,,,9�

��

������������������������!�'�0�����+�����+���,�

���

�7��������#�)�����������#���1����������������������������

�����

��� ����������������� ��

����(�&���7�0����9�� @����������������8� :�

4����!&����!�.��3�����������������������0��)����*�����+����������������#�����������#������������������������0������������������

��!$0"�'���$����� !�"�����������������������!&�/��."�'��"��9��

�������������(�$"%"$��� !&"�"���

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9��

���

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 119: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9��8�

8���

����������������������������������������������������

���

��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

�����)��+�������� ���!��6����������$������������� ���!��G�����+�����$�����������

������������������������������������������������������������������������������������

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��� ����!� "�'� �!����"�'�

"��)������������+>�������������'����������������������������������,� �� -�� ��

"��)������)�����������������������0������������,� �� -�� ��

"��)��������������+>����������'��������,� �� -�� ��

���4������ ��������������������0� �

�%���������+>����������������������#������������������������������������O� @6��

�3E$���������#���������'�����������������)��(����������,,,,,,� �@6��

&���������������!� 2#� 2E&�8���'���������������������9#,,,�&�������'���������8��������#��������������,,,9� �@6��

�%���������+��������4��������@����,,� @6��

� �����������������������������������������+����������������,�

�7��������#�)�����������#���1����������������������������

$��������������+���!�0�����#���������������+������������#���������),,,��

:56�

��� �� ��

���(�&���7�0�����%����0���� �&�;� �5� �5�

4����!&����!�.�%���������������������+�������,�7�����������������+�����������������������������+�0�������'��������������������������������������������������������+� ��������������������������������������+� ������������������������������

��!$0"�'���$����� !�"����

�2�������������������������������������������0�����'������,��

������������������������!���"!&���� 9��

�",&"�'�!(079���

��0��� �$������9�� ���)���#�. �0������,�

����������������������(�$"%"$��� !&"�"��;��

��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 120: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���������

MODULE: Adaptation Objectives. Baccalauréat holders entering Mechanical and Production Engineering departments come from various origins. It has seemed necessary to provide scientific Baccalauréat holders (from science, life science and engineering science specialisations) with basic technical and technological knowledge and teach them the appropriate technical vocabulary. Likewise, it has seemed necessary to provide industrial technology Baccalauréat holders with a refresher course in the scientific disciplines..

Teaching methods. The teaching methods will be adapted to the audience.

Summary

No.

ADAPTATION Title of course summaries L T P

Adaptation 15 15

S1 F135

Introducing scientific Baccalauréat holders to technological approaches and technical language. Allowing technological Baccalauréat holders to reinforce their scientific knowledge and master simple numerical calculations..

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 121: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

���

��������9���� ��@

����������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

����)��+���������

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

���&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'���� ����!� "�'� �!����"�'�

�5����������������������C��������D���������������������������������������������������������� � � ������������������-�����0���������������������������,�5�������������������������,� �

2���)������������������C��������D������������������������������(��)��������������������,� �� -�� ��

2���)����������������������������������������������������O� �� -�� ��

���4������1��''���"�������,��! !(�� �&�$!&&73� ��������������������0� �

��

E��������/������/�������,�"��)�����������������������������������������������������������,�

E��������������0+�������������������������������,��

� ���������������:�������������������������

�/��������'��(��)������������������������������������������������5@%,�%�������������

��������������������)�������������������0������������,�4B�������������������������������������

�$����������!������������������#�������������������������8������������������9#�

��

�A���������������������#������������*�������,,,��

�����

�7��������#�)�����������#���1�������������

����

��� �� ��

���(�&���7�0����9�� �@� �@�

4����!&����!�.�

�0"��"���� �$�"���/"&&�,��! !(�� �����0�����,����%�!��"#"�'��!$$!&!��K!��0�& ����!� ��0�"��

(�"���.��/&� '�;��

���$��& �,���%%��� �!���0��,�'"��"�'��%��0��$����������0���'0�����0����������;��

�0��"�����!,�#��!���(���",&����("$��!� �!�������&"�"�!�"#�;��

�����

��!$0"�'���$����� !�"���� ���� �&�;�

�,�

�����������������!&�/��."�'��"��9��

�����������(�$"%"$��� !&"�"���

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9���© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 122: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

���������

CU 4: SYNTHESIS ACTIVITIES AND WORK PLACEMENT

Semesters 1, 2, 3 and 4

- TUTORED PROJECTS

- WORK PLACEMENT.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 123: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

������MODULE: Tutored Projects

The objectives of this module are: •� Developing personal (scientific and technical) knowledge acquisition skills and independence

guaranteeing the further development of Mechanical and Production Engineering technicians, •� Allowing the integration of various (managerial, scientific and technical) courses in technical topics

related to Mechanical and Production Engineering speciality, in association with group work learning,

•� Developing a sense of working time organisation and applying knowledge acquisition methods to personal work.

•� Developing expression and communication techniques. Teaching methods. Within the course framework, the tutored projects of a 300-hour duration lead to an organised assessment in view of obtaining the DUT.

They allow students to develop their know-how and interpersonal skills, together with the work placement.

The industrial nature of a project is not an objective in itself, but rather a means related to an active and inductive pedagogy guaranteeing the acquisition of methodological approaches, behaviour and attitudes essential for both personal and professional studies.

Great attention should be paid to the scope of projects proposed to students as, paradoxically, a too ambitious project placing the student in a subordinate position in an approach entirely constructed and guided by the tutor, can run counter to the intended purpose.

The projects and work placements are used as soon as possible in the course as additional study themes, technological and scientific enrichment, and knowledge of local industrial activities...

The synthesis activities are structured around 4 course summaries: F141, F241, F 3 4 1 , F441.

The first course, F141, allows the student to develop his Personal and Professional Project, in association with the courses F113 and F114. He will be involved in studying and presenting a profession from the manufacturing sector.

The second course, F241, allows the student to appropriate the knowledge acquired during the first two semesters through the study of an existing system. It allows him to define the diversity of the stages necessary for developing a system (from the idea to the end-of-life).

The third and fourth course summaries, F341 and 441, concern the study of a system to be developed, improved or industrialised. It includes the specifications definition, research and solution definition phases as well as a validation phase.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 124: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9����

�8��

�A��������������A9�C�= ��4��� ���� �������

����

��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)��+�������� 5�����������)������������������������������������������

���������� ��#� ����86669��������������+� ��

8�B��������������������������9,�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ��� ����!� "�'� �!����"�'�

� ���+�������������������������������������������������������������,,� ����-���� �

���5�����������)����������� �#�

���4�������������������������������������������������������������������������������������������0� �

C�����������������#��������������:����8������������������'������+9������������

•� ���������������������������������������������������������������������������,�

•� /�����0������������'����������������B�����������������������)��������������+#�

•� /�����0�����������������0���>���������������������������,,O�

E����������

7����

��������������

��� �� ��

���(�&���7�0����9�� :5�0������%�(�����!&�/��.�

4����!&����!�.�

�%�����������������+������������'��+������0��0������������B����������������������������0+���������+��������������������

�����������,�@���(��������� �#����������������'�������������������������������,�5�������������������0�����������������

�������>��666,�

��!$0"�'���$����� !�"�����

��������������������������������!&�/��."�'��"��9��:5�0�����

�������������������������(�$"%"$��� !&"�"���

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9��

�����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 125: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

��������9����

� �8��

���A��������������A9����������������A����

����

��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���)��+�������� 5������������������666��������8 ��#� ���9#����������

�B��������� ���� �������������� 8 �#� ��9� ����

���������8 ��#� ���9��������,�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������ ����!� "�'� �!����"�'�

�2���+��������+�����������������+,� -�

��������������+���������������+�����������������������������������,,� ����-������

���4������ ��������������������0� �

2���+���������B��������+�����0+�����+���!�

L�5������0�����������#�L�5�����������������#�

1�%���������������������������������#�

1�%����������������#��������������#��

2���+���������B��������+�����0+����(�������!�L� �����������������#�L�7����������������������������#�������������������������������������������������������>��

����������8��������������)����9,�

�E����������

7����

�������������

,��

�E����������

7����

�������������

��� �� ��

���(�&���7�0����9����:5�0������%�"� �(�� ����/��.�

4����!&����!�.����

�6�����������8�9������������������0+������������S!�

•� ������������������������#�

•� 2�(�������������+���#�

•� 2������������+���#�

��

���!$0"�'���$����� !�"�����

����

•� 2������+����������������������������������#�

•� 2������+��������������������������������!����������#����������#������0�+O�

�. ������!�������#�������#��������,,,�

��7���!�5�����������)�����B���������8���������������������������������������������������������������85�%%99#��

��&��������!��0������#������������������,�

��%������������������)�����������������������������������������0����'������,�%�����������������)�����������+��'��+������

�0�������+�����0���������������'�������������������������'������+���,������

�������!&�/��."�'��"��9��

����

��(�$"%"$��� !&"�"���

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9��

�© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 126: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

�����������������9����

���

�8��

�A��������������A9�

������������� �����������������4�������������

����)

��+��������

��

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

��

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'����� ����!� "�'� �!����"�'�

�����������������:����0+���'�����������������)����������!�

•� /���������#�

•� E�������������������������������#� �� -�� ���

�/�'��������������������(����,� �� -�� �

����4������ ������

��������������0� ��

��

7�������������������6��:����������8�����#���������0�������#���������,,,9�

�/��������������������>�����������������������������������������������������������������������

�E����������

7����

������������

,�

��

�� �� ���

����(�&���7�0����9�� >5�0������%�(�����!&�/��.�

4����!&����!�.�

%��� ������� �����������)����0�����������������������������0�������)����0��0�������������������������,��

��!$0"�'���$����� !�"����

. ������!�������#�������#��������,,,�7���!�5�����������)�����B���������8���������������������������������������������������������������85�%%99#�

&��������!��0������#������������������,,O��

���������

Specific modalities ������!&�/��."�'��"��9��

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9��

����

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 127: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����������������9��8�

���

88��

���A��������������A9�

����������4��������������������������

����)��+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

���

�,-�$�"#���"���������%�&�#�&�����$��(����$"���

��

�&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'������ ����!� "�'� �!����"�'�

�����������������:����0+����������������������)����������!�/�������������������������������������������������������������8�����,,,9#�'����������0+������#���������������������������,

��

��� -�� ��

��

���4������1 �(�� "�'�����0��$0������0���3� ��������������������0� �

/��������������������������8�������������������9�

%��������=���'����������������������������

/����������������������������������������������������

5�������������#��������������+�86�������������=���6�����+��9

�E����������

�����

������������

�� � � ��

�. �����������������������������������,�8���������������������������#�������������$������$�"#��$�"�"$!&�!�!&7�"�9�

��

��� �� ��

���(�&���7�0����9�� >5�0������%�(�����!&�/��.�

4����!&����!�.�

�%��� ������� �����������)����0�����������������������������0�������0��0�������������������������,���

��.������!�������#�������#��������,,�

����!$0"�'���$����� !�"����

7���!�5�����������)�����B���������8���������������������������������������������������������������85�%%99#�

&��������!��0������#������������������,,,��������������������!&�/��."�'��"��9��

������������(�$"%"$��� !&"�"����

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9��

� © Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 128: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

������������MODULE: Industrial Work Placement

Course summary F442 describes the in-company work placement of a minimum duration of 10 weeks. The student is involved in:

•� Knowing the company in its social, technical, economic and organisational aspects, •� Applying and enhancing the knowledge acquired during face-to-face teaching.

A follow-up is conducted by one of the department’s lecturers or tutors via regular contacts with the host company and (at least) one on-site visit wherever possible.

Assessment is based on the work undertaken, the student trainee’s ability to integrate the company, his written report and his oral presentation.

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005

Page 129: National Educational Programme: DUT (University Technology ... · IV. DIPLOMA. The DUT (University Technology Diploma) in Mechanical and Production Engineering is a national diploma

����

���������9��8�

��

88��

���������= ��C�������������

����)��+��������

��� !�"�������#"����$����������!�"���%�&%"&&"�'�(��)��*�"�"�����

�2&&�

��,-�$�"#���"���������%�&�#�&�����$��(����$"���

��&�'������(��)��������*���������

!� �.��/)0�/�1(��%���"��!&"2!�"��3� ��%���"�'� ���� ����!� "�'��!����"�'�

"��)��������������+��������������#����������#������������������������������������,� ����-���� ��

�2���+����������������������(��)��������*�����������������1��1�������������,� ����-���� �

��

���4�������������������������������������������������������������������������������������������0� �

� � � � � � � � � � � � ��������������������������������������������������������������������E���������)��(�

�. ��(���������������=��������������������������+#�������������)��������������,� � � ��������������� �������������������������

7����

�������������

���)��(�

����������

������+�

�'����������

�� �� ���

���(�&���7�0����9�� �"�"�����%��5�/��.��

4����!&����!�.���

���!$0"�'���$����� !�"����

%���)��(����������������������������������������>����������'����������������������������������������4B�������������������������������&����������������,�

%�������������������)����0��'���������������������0+���������)����'��������0��,,�

��������!�"����%��0����� ������!"���I��/��.�"���0��%�����%9�. �������������#����������������������!��0������#������������������,,,�

������������������!&�/��."�'��"��9��

����������(�$"%"$��� !&"�"���

��!���"!&���� !��

��",&"�'�!(079��

���0��� �$������9��

© Ministry of National Education, Higher Education and Research SEPTEMBER 2005