national fire protection association nfpa available designs · storage tank features an inner and...

Photo above: 12k Envirosafe Fireguard Tank for generator applicaon at VA Hospital Tampa, FL FIREGUARD® Features: • Insulates product in tank from ambient temperature variaons, reducing emissions to the environment. • Primary and secondary tank can be ghtness tested on-site with standard tesng procedures, unlike other designs. • Steel outer wall provides a low cost maintenance and protecon from weathering • Primary storage tank and secondary containment compable with a wide variety of fuels and chemicals, including biodiesel and ethanol. • Support designs available for all seismic requirements • Intersal space can be monitored for leak detecon • Meets temperature requirements when the furnace test was extended to 4 hours. Addional Features: • Steel construcon allows for recycling • Low cost compartments and customizaon • Built to naonally recognized STI standards with strict third-party quality control inspecon program • Supports designs with engineered hurricane e-downs FIREGUARD® Standards: • UL 2085 Listed “Protected” tank • Balliscs and Impact protecon per UL 2085 • Both inner and outer steel tanks are built to UL standards • Naonal Fire Protecon Associaon (NFPA) 30 & 30A • Internaonal Fire Code (IFC) • California Air Resources Board (CARB) Standing Loss Control tesng requirements for air emissions • Steel Tank Instute (STI) Standard F941 for Protected Above Ground Storage Tanks • Unique Thermal Insulang Material is 75% Lighter than Concrete Available Designs: • Horizontal • Vercal • Rectangular FIREGUARD® double wall ﬁre protected above ground storage tank features an inner and outer steel tank with a unique lightweight thermal insulaon material that exceeds the UL 2-hour ﬁre test. Being 75% lighter than concrete reduces shipping, installaon and relocaon costs. Steel outer tank, secondary containment 3” to 6” of lightweight thermal insulaon Steel inner primary tank MEMCO, Inc. Toll-Free: (800) 555-4754 Email: [email protected] Web: www.abovegroundfuelstoragetanks.com

Upload: others

Post on 05-May-2020

4 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: National Fire Protection Association NFPA Available Designs · storage tank features an inner and outer steel tank with a unique lightweight thermal insulation material that exceeds

Photo above: 12k Envirosafe Fireguard Tank for generator application at VA Hospital Tampa, FL

FIREGUARD® Features:

• Insulates product in tank from ambient temperature variations, reducing emissions to the environment.

• Primary and secondary tank can be tightness tested on-site with standard testing procedures, unlike other designs.

• Steel outer wall provides a low cost maintenance and protection from weathering

• Primary storage tank and secondary containment compatible with a wide variety of fuels and chemicals, including biodiesel and ethanol.

• Support designs available for all seismic requirements

• Interstitial space can be monitored for leak detection

• Meets temperature requirements when the furnace test was extended to 4 hours.

Additional Features:

• Steel construction allows for recycling

• Low cost compartments and customization

• Built to nationally recognized STI standards with strict third-party quality control inspection program

• Supports designs with engineered hurricane tie-downs

FIREGUARD® Standards:

• UL 2085 Listed “Protected” tank

• Ballistics and Impact protection per UL 2085

• Both inner and outer steel tanks are built to UL standards

• National Fire Protection Association (NFPA) 30 & 30A

• International Fire Code (IFC)

• California Air Resources Board (CARB) Standing Loss Control testing requirements for air emissions

• Steel Tank Institute (STI) Standard F941 for Protected Above Ground Storage Tanks

• Unique Thermal Insulating Material is 75% Lighter than Concrete

Available Designs:

• Horizontal

• Vertical

• Rectangular

FIREGUARD® double wall fire protected above ground storage tank features an inner and outer steel tank with a unique lightweight thermal insulation material that exceeds the UL 2-hour fire test. Being 75% lighter than concrete reduces shipping, installation and relocation costs.

Steel outer tank,

secondary

containment

3” to 6” of

lightweight thermal

insulation

Steel inner primary

tank

MEMCO, Inc. Toll-Free: (800) 555-4754 Email: [email protected] Web: www.abovegroundfuelstoragetanks.com