nautilus wet series brochure 2017 - midwest...
TRANSCRIPT
Flat Deburring, Edge Rounding & FinishingNAUTILUS SERIES WETNAUTILUS SERIES WET
NAUTILUS SERIES WET DEBURRING, EDGE ROUNDING & FINISHING MACHINESNautilus Wet Deburring and Finishing Machines are designed for economically deburring, finishing, and/or edge rounding a wide variety of component parts made from either sheet metal or steel plate.Scotch Brite™ brush(es) ensure exceptional part results where the finish is critical. Available in one to four head configurations, and in 37 and 52-inch wide models. The Nautilus is designed to provide years of dependable service in the most demanding industrial applications. Made in USA.
STANDARD FEATURES
• Allen-Bradley HMI/PLC controls with color monitor
• Electronic vertical head positioning systems
• Electronic variable speed belt/brush control
• Special conveyor belts
• Sacrifi cial stainless steel conveyor bed cover
• Vacuum bed
• Automatic lubricating system
ACCESSORIES
• Modular design with “docking ports” for a variety of cartridge-style abrasive heads
• Conveyor bed is manufactured with 0.375 inch thick steel plate and precision machined
and to +/- 0.001 tolerance to insure fl atness
• Conveyor bed adjustment with 4 precision jacks, covered gears, roller bearing guides and direct linkage
• Electronic thickness adjustment with HMI/PLC control, color monitor and up to 50 presets
• Automatic self-aligning conveyor belt tracking system
• Electronic variable feed speed control with AC drive
• Cartridge-style belt head assembly with automatic abrasive belt tracking system with ultrasonic sensor
• Cartridge-style barrel brush head assembly with standard oscillating speeds of 250 strokes per minute
• Cartridge-style top brush head assembly with 10-inch diameter brushes or Scotch-Brite pads
• Belt head and brush head assemblies are handwheel adjusted
• Pinch rollers are spring-loaded
• Infeed conveyor section includes 2 vinyl covered rollers
• Infeed safety bar with over thickness limit switch
• Stainless steel collection pan and exterior doors
• Automatic parts dryer with Air Sonic™ air knife and regenerative blower
• Automatic paper bed fi lter
• Central lubrication point
• Electrical control panel with 24 volt DC circuit
• Made In USA
Paper Bed Filter
Articulating Arm
Includes filter media, clean tank, sludge bin, and clean return pump
Note: Articulating Arm is not included on Nautilus 1 Single Head models
Close Up Shots & Accessories
Optional Allen-Bradley® HMI/PLC to control thickness, feed speed, belt/brush RPM & brush oscillation speed
Optional Allen Bradley® HMI/PLC
Automatic Lubricating System
Cartridge-Style Abrasive Heads
Automatic Conveyor Belt Tracking
Infeed Conveyor
Low maintenance AC drive with variable line speed from 5-40 fpm
Conveyor bed with automaticbelt tracking system
Infeed conveyor extension with two (2) vinyl covered rollers
Optional vacuum bed for short parts
Optional Vacuum Bed
Automatic Abrasive Belt Tracking
Self-aligning, abrasive belt tracking system
Automatic Parts Dryer
Automatic parts dryer with Air-Sonic™ air knife and regenerative blower
Top Brushes
Top brushes for deburring and edge rounding
FIXED BELT HEAD (FB) ADJUSTABLE BELT HEAD (AB) BARREL BRUSH HEAD (BB) TOP BRUSH HEAD (TB)
Performance Data & Specifi cations
DESCRIPTION 37 INCH 52 INCH
Maximum Panel Width 36 inches (914 mm) 51 inches (1295 mm)
Working Thickness- Minimum determined by material- Maximum
0.035 in (0.9 mm) 6 inches (152 mm)
0.035 in (0.9 mm)6 inches (152 mm)
Minimum Part Length- w/belt head assemblies- w/barrel brush assemblies- w/top brush assemblies
9.75 inches (247 mm)12 inches (305 mm)
12.5 inches (318 mm)
9.75 inches (247 mm)14 inches (355 mm)
12.5 inches (318 mm)
Belt Head Assembly (FB Fixed/AB Adjustable)- - Contact drum diameter
- Drum speed- Motor Size- Abrasive Belt Size
6 inches (152 mm)2750 SFPM
20 hp37 X 75 inches
8 inches (203 mm)3660 SFPM
25 hp52 X 75 inches
Barrel Brush Head Assembly (BB)- Minimum Brush Diameter- Maximum Brush DiameterBrush - Inside Diameter- Option 1- Option 2Brush SpeedMotor SizeOscillating Speed
6.75 inches (172 mm)10 inches (254 mm)
3 inches (76 mm)5.75 inches (146 mm)
3800 SFPM15 HP
250 SPM
7.5 inches (190 mm)12 inches (305 mm)
5.75 inches (146 mm)
3800 SFPM20 HP
250 SPM
Top Brush Head Assembly- Brush/Pad Diameter- Number of Brushes- Brush Speed- Motor Size (each)- Oscillating Speed
10 inches (254 mm)4 each
1200 SFPM2 HP
30 SPM
10 inches (254 mm)5 each
1200 SFPM2 HP
30 SPM
Pinch Roller Diameter 2.15 inches (55 mm) 2.75 inches (70 mm)
Feed Speed 6 - 40 FPM 6 - 40 FPM
Automatic Paper Bed FilterOne (1) Head Models- Flow Rate- Tank CapacityTwo (2) Head Models- Flow Rate- Tank CapacityThree (3) Head Models- Flow Rate- Tank CapacityFour (4) Head Models- Flow Rate- Tank Capacity
26 GPM80 GALLONS
39 GPM120 GALLONS
66 GPM185 GALLONS
66 GPM185 GALLONS
26 GPM80 GALLONS
66 GPM185 GALLONS
66 GPM185 GALLONS
80 GPM220 GALLONS
Automatic Parts DryerOne (1) Head Models Two (2) Head ModelsThree (3) & Four (4) Head Models
4 HP4 HP4 HP
7.5 HP7.5 HP7.5 HP
Compressed Air Requirements 80 PSI @ 5 CFM 80 PSI @ 5 CFM
Electrical Requirements TBD TBD
Typical Confi gurations
THREE HEAD (FB-TB-BB)
LEGENDFB Fixed Belt BB Barrel BrushAB Adjustable Belt TB Top Brush
THREE HEAD (AB-AB-BB) THREE HEAD (FB-BB-BB)
TWO HEAD (AB-AB)SINGLE HEAD (FB/AB)
FOUR HEAD (AB-AB-BB-BB)
YOUR REQUIREMENTS DRIVE OUR BUSINESS.Midwest Automation is a family owned U.S. manufacturing company located in Minneapolis Minnesota.
For companies who care where the products they buy are made, it will come as no surprise that buying American is not as easy as it used to be. If you look closely you will discover that many of the machines represented to be “American made” are in fact imported from foreign countries.
For over 60 years, Midwest Automation has manufactured industrial machinery for the woodworking, composite panel and metalworking industries using U.S. labor, and locally available components whenever possible.
Our extensive application knowledge, coupled with creative machine designs, allows us to provide unique and reliable solutions that improve your manufacturing processes, supported by local parts and service.
If you are looking for an industrial machinery manufacturer with real application expertise, contact Midwest Automation today.
Manufacturing results since 1959.
2645 26th Avenue South, Minneapolis, MN 55406phone 612-721-5347 www.midwestautomation.com
© 01.01.2017 Midwest Automation LLC