nd2 na3 ohb usen - triumphassets1.triumphmotorcycles.com/files/content/en-us/... · motorcycle...

1

Foreword

FOREWORDThis handbook contains information on the Triumph Sprint ST and Sprint GT motorcycles.Always store this owner's handbook with the motorcycle and refer to it for informationwhenever necessary.

Warnings, Cautions and NotesThroughout this owner's handbookparticularly important information ispresented in the following form:

Note:

• This note symbol indicates pointsof particular interest for moreefficient and convenient operation.

WarningThis warning symbol identifies specialinstructions or procedures, which, if notcorrectly followed, could result in personalinjury, or loss of life.

CautionThis caution symbol identifies specialinstructions or procedures, which, if notstrictly observed, could result in damage to,or destruction of, equipment.

2

Foreword

Warning LabelsAt certain areas of themotorcycle, the symbol (left)can be seen. The symbolmeans 'CAUTION: REFER TOTHE HANDBOOK' and willbe followed by a pictorialrepresentation of the subject

concerned.

Never attempt to ride the motorcycle ormake any adjustments without reference tothe relevant instructions contained in thishandbook.

See pages 12 and 13 for the location of alllabels bearing this symbol. Where necessary,this symbol will also appear on the pagescontaining the relevant information.

MaintenanceTo ensure a long, safe and trouble free life foryour motorcycle, maintenance should only becarried out by an authorized Triumph dealer.

Only an authorized Triumph dealer will havethe necessary knowledge, equipment andskills to maintain your Triumph motorcyclecorrectly.

To locate your nearest Triumph dealer, visitthe Triumph web-site at www.triumph.co.ukor telephone Triumph Motorcycles AmericaLimited on (678) 854 2010.

Noise Control SystemTampering with the Noise Control System isprohibited.

Owners are warned that the law mayprohibit:

a) The removal or renderinginoperative by any person other thanfor purposes of maintenance, repairor replacement, of any device orelement of design incorporated intoany new vehicle for the purpose ofnoise control prior to its sale ordelivery to the ultimate purchaser orwhile it is in use and,

b) the use of the vehicle after suchdevice or element of design hasbeen removed or renderedinoperative by any person.

3

Foreword

Owner's HandbookThank you for choosing a Triumphmotorcycle. This motorcycle is the product ofTriumph's use of proven engineering,exhaustive testing, and continuous striving forsuperior reliability, safety and performance.

Please read this owner's handbook beforeriding in order to become thoroughly familiarwith the correct operation of yourmotorcycle's controls, its features, capabilitiesand limitations.

This handbook includes safe riding tips, butdoes not contain all the techniques and skillsnecessary to ride a motorcycle safely.

Triumph strongly recommends that all ridersundertake a safety course approved by theMotorcycle Safety Foundation to ensure safeoperation of this motorcycle. Informationabout the nearest Motorcycle SafetyFoundation course to you can be obtained bycalling the following nationwide toll freenumber: 800-447-4700, or by writing to theMotorcycle Safety Foundation at: 2, JennerStreet, Irvine, California 92718. To ensure along and trouble free life for your motorcycle,maintenance should be carried out asdescribed in this manual by an authorizedTriumph dealer.

This handbook is also available from yourlocal dealer in:

• Dutch;

• French;

• German;

• Italian;

• Japanese;

• Spanish;

• Swedish.

Talk to TriumphOur relationship with you does not end withthe purchase of your Triumph. Your feedbackon the buying and ownership experience isvery important in helping us develop ourproducts and services for you. Please help usby ensuring your dealership has your E-mailaddress and registers this with us. You willthen receive an online customer satisfactionsurvey invitation to your E-mail addresswhere you can give us this feedback.

Your Triumph Team.

WarningThis owner's handbook, and all otherinstructions that are supplied with yourmotorcycle, should be considered apermanent part of your motorcycle andshould remain with it even if yourmotorcycle is subsequently sold.

All riders must read this owner's handbookand all other instructions which aresupplied with your motorcycle, beforeriding, in order to become thoroughlyfamiliar with the correct operation of yourmotorcycle's controls, its features,capabilities and limitations. Do not lendyour motorcycle to others as riding whennot familiar with your motorcycle'scontrols, features, capabilities andlimitations can lead to an accident.

Foreword

4

InformationThe information contained in this publication is based on the latest information available at thetime of printing. Triumph reserves the right to make changes at any time without prior notice, orobligation.

Not to be reproduced wholly or in part without the written permission of Triumph MotorcyclesAmerica Limited.

© Copyright 04.2010 Triumph Motorcycles America Limited.

Publication part number 3856161 issue 1.

Table of ContentsThis handbook contains a number of different sections. The table of contents below will helpyou find the beginning of each section where, in the case of the major sections, a further tableof contents will help you find the specific subject required.

Foreword. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Warning Labels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Parts Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Serial Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

How to Ride the Motorcycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Accessories, Loading and Passengers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Maintenance and Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121

5

Foreword - Safety First

FOREWORD - SAFETY FIRST

The Motorcycle Fuel and Exhaust Fumes

WarningThis motorcycle is designed for on-roaduse only. It is not suitable for off-road use.

Off-road operation could lead to loss ofcontrol of the motorcycle resulting in anaccident causing injury or loss of life.

WarningThis motorcycle is not designed to tow atrailer or be fitted with a sidecar. Fitting asidecar and/or a trailer may result in loss ofcontrol and an accident.

WarningThis motorcycle is designed for use as atwo-wheeled vehicle capable of carrying arider on his/her own, or a rider and onepassenger (subject to a passenger seatbeing fitted).

The total weight of the rider, and anypassenger, accessories and luggage mustnot exceed the maximum load limit of:

Sprint ST - 473 lbs (215 kg);

Sprint GT - 473 lbs (215 kg).

WarningGASOLINE IS HIGHLY FLAMMABLE:Always turn off the engine when refuelling.

Do not refuel or open the fuel filler capwhile smoking or in the vicinity of anyopen (naked) flame.

Take care not to spill any gasoline on theengine, exhaust pipes or mufflers whenrefuelling.

If gasoline is swallowed, inhaled or allowedto get into the eyes, seek immediatemedical attention.

Spillage on the skin should be immediatelywashed off with soap and water andclothing contaminated with gasolineshould immediately be removed.

Burns and other serious skin conditionsmay result from contact with gasoline.

WarningNever start your engine or let it run for anylength of time in a closed area. Theexhaust fumes are poisonous and maycause loss of consciousness and deathwithin a short time. Always operate yourmotorcycle in the open-air or in an areawith adequate ventilation.

6


Riding

WarningNever ride the motorcycle when fatiguedor under the influence of alcohol or otherdrugs.

Riding when under the influence of alcoholor other drugs is illegal.

Riding when fatigued or under theinfluence of alcohol or other drugs reducesthe rider's ability to maintain control of themotorcycle and may lead to loss of controland an accident.

WarningAll riders must be licensed to operate themotorcycle. Operation of the motorcyclewithout a license is illegal and could lead toprosecution.

Operation of the motorcycle withoutformal training in the correct ridingtechniques that are necessary to becomelicensed is dangerous and may lead to lossof motorcycle control and an accident.

WarningAlways ride defensively and wear theprotective equipment mentionedelsewhere in this foreword. Remember, inan accident, a motorcycle does not give thesame impact protection as a car.

WarningThis Triumph motorcycle should beoperated within the legal speed limits forthe particular road travelled. Operating amotorcycle at high speeds can bepotentially dangerous since the timeavailable to react to given traffic situationsis greatly reduced as road speed increases.Always reduce speed in potentiallyhazardous driving conditions such as badweather or heavy traffic.

WarningContinually observe and react to changesin road surface, traffic and wind conditions.All two-wheeled vehicles are subject toexternal forces which may cause anaccident. These forces include but are notlimited to:

• Wind draft from passing vehicles;

• Potholes, uneven or damagedroad surfaces;

• Bad weather;

• Rider error.

Always operate the motorcycle atmoderate speed and away from heavytraffic until you have become thoroughlyfamiliar with its handling and operatingcharacteristics. Never exceed the legalspeed limit.

7


Note:

WOBBLE/WEAVEA weave is a relatively slow oscillation of therear of the motorcycle, while a wobble is arapid, possibly strong shaking of thehandlebar. These are related but distinctstability problems usually caused by excessiveweight in the wrong place, or by amechanical problem such as worn or loosebearings or under-inflated or unevenly worntires.

Your solution to both situations is the same.Keep a firm hold on the handlebars withoutlocking arms or fighting the steering.Smoothly ease off the throttle to slowgradually. Do not apply the brakes, and donot accelerate to try to stop the wobble orweave. In some cases, it helps to shift yourbody weight forward by leaning over thetank.

Copyright © 2005 Motorcycle SafetyFoundation. All rights reserved. Used withpermission.

WarningEnsure that you know and respect the rulesof the road. Read and observe publicationssuch as 'MOTORCYCLE SAFETY', 'YOUAND YOUR MOTORCYCLE, RIDINGTIPS' and also read and become familiarwith the contents of the MOTORCYCLEHANDBOOK for your state.

CautionThis Triumph motorcycle is not fitted withspark arresters. Operation in forests, brushor grass areas may violate state and locallaws and regulations.

8


Helmet and Clothing

When choosing a helmet, always look for aDOT (Department of Transport) stickerindicating that the helmet has DOT approval.Do not buy a helmet without DOT approval.

WarningWhen riding the motorcycle, both riderand passenger must always wear amotorcycle helmet, eye protection, gloves,boots, trousers (close fitting around theknee and ankle) and a brightly coloredjacket. Brightly colored clothing willconsiderably increase a rider's (orpassenger's) visibility to other operators ofroad vehicles. Although full protection isnot possible, wearing correct protectiveclothing can reduce the risk of injury whenriding.

WarningA helmet is one of the most importantpieces of riding gear as it offers protectionagainst head injuries. You and yourpassenger's helmet should be carefullychosen and should fit you or yourpassenger's head comfortably andsecurely. A brightly colored helmet willincrease a rider's (or passenger's) visibilityto other operators of road vehicles.

An open face helmet offers someprotection in an accident though a full facehelmet will offer more.

Always wear a visor or approved gogglesto help vision and to protect your eyes.

b

9


Handlebars and Footrests Parking

WarningThe rider must maintain control of thevehicle by keeping hands on thehandlebars at all times.

The handling and stability of a motorcyclewill be adversely affected if the riderremoves his hands from the handlebars,resulting in loss of motorcycle control andan accident.

WarningThe rider and passenger must always usethe footrests provided, during operation ofthe vehicle.

By using the footrests, both rider andpassenger will reduce the risk ofinadvertent contact with any motorcyclecomponents and will also reduce the risk ofinjury from entrapment of clothing.

WarningAlways turn off the engine and remove theignition key before leaving the motorcycleunattended. By removing the key, the riskof use of the motorcycle by unauthorizedor untrained persons is reduced.

When parking the motorcycle, alwaysremember the following:

Engage first gear to help prevent themotorcycle from rolling off the stand.

The engine and exhaust system will be hotafter riding. DO NOT park wherepedestrians, animals and/or children arelikely to touch the motorcycle.

Do not park on soft ground or on a steeplyinclined surface. Parking under theseconditions may cause the motorcycle to fallover.

For further details, please refer to the 'Howto Ride the Motorcycle' section of thisowner's handbook.

10


Parts and Accessories

Triumph does not accept any liabilitywhatsoever for defects caused by theinstallation of non-approved parts, accessoriesor conversions or the installation of anyapproved parts, accessories or conversions bynon-approved personnel.

Maintenance/Equipment

WarningOwners should be aware that the onlyapproved parts, accessories andconversions for any Triumph motorcycleare those which carry official Triumphapproval and are fitted to the motorcycleby an authorized dealer.

In particular, it is extremely hazardous to fitor replace parts or accessories whoseinstallation requires the dismantling of, oraddition to, either the electrical or fuelsystems and any such modification couldcause a safety hazard.

The installation of any non-approved parts,accessories or conversions may adverselyaffect the handling, stability or other aspectof the motorcycle operation that may resultin an accident causing injury or death.

WarningConsult your authorized Triumph dealerwhenever there is doubt as to the corrector safe operation of this Triumphmotorcycle.

Remember that continued operation of anincorrectly performing motorcycle mayaggravate a fault and may alsocompromise safety.

WarningUse of a motorcycle with bank angleindicators worn beyond the maximumlimit will allow the motorcycle to bebanked to an unsafe angle.

The maximum bank angle wear limits are:

• Sprint ST - 0.2 in (5 mm)remaining;

• Sprint GT - 0.6 in (15 mm)remaining.

Banking to an unsafe angle may causeinstability, loss of motorcycle control andan accident.

1. Bank angle indicatorccsm

1

11


WarningEnsure all equipment that is required bylaw is installed and functioning correctly.The removal or alteration of themotorcycle's lights, mufflers, emission ornoise control systems can violate the law.Incorrect or improper modification mayadversely affect the handling, stability orother aspect of the motorcycle operation,which may result in an accident causinginjury or death.

WarningIf the motorcycle is involved in an accident,collision or fall, it must be taken to anauthorized Triumph dealer for inspectionand repair. Any accident can causedamage to the motorcycle that, if notcorrectly repaired, may cause a secondaccident that may result in injury or death.

Warning Labels

12

WARNING LABELSThe labels detailed on this and the following pages draw your attention to important safetyinformation in this handbook. Before riding, ensure that all riders have understood andcomplied with all the information to which these labels relate.

Warning Label Locations

ccot65432N1

R.P.M.

Breaking-In(page 49)

Windshield(page 115)

Gear Position

(page 56) Chain(page 85)

Tires(page 99)

Warning Labels

13

WARNING LABELS

Warning Label Locations (continued)

ccou

Daily Safety Checks(page 50)

Unleaded Fuel(page 36)

Helmet(page 8)

Coolant(page 79)

Engine Oil(page 75)

Fairing Stowage(page 67)

14

Parts Identification

PARTS IDENTIFICATION

Sprint ST

1. Headlight2. Position lamp3. Front turn signal4. Coolant expansion tank5. Radiator/Coolant pressure cap6. Fuel filler cap7. Fuel tank8. Rear light

9. Front brake disc10.Front brake caliper11. Oil cooler12.Side stand13.Gear-shift pedal14.Drive chain15.Muffler16.Rear turn signal

ccmq

52 6

15

3 74 8

141312 169 10 11

1

15



Sprint ST

17. Rear brake fluid reservoir18.Battery19.Rear suspension unit20.Tool kit21. Front fork

22.Rear brake disc23.Rear brake caliper24.Rear brake pedal25.Oil filler cap/Dipstick26.Clutch cable

20

2422

19 21

262523

17

ccmp

18

16



Sprint GT

1. Headlight2. Position lamp3. Front turn signal4. Coolant expansion tank5. Radiator/Coolant pressure cap6. Fuel filler cap7. Fuel tank8. Brake/tail light

9. Front brake disc10.Front brake caliper11. Oil cooler12.Side stand13.Gear-shift pedal14.Drive chain15.Pannier16.Rear turn signal

cgdx

51 6

15

3 74 8

141312 169 10 11

2

17



Sprint GT

17. Rear brake fluid reservoir18.Battery19.Rear suspension unit20.Tool kit21. Front fork22.Muffler

23.Rear brake disc24.Rear brake caliper25.Rear brake pedal26.Oil filler cap/Dipstick27.Clutch cable

cgdw

20

2523

19 21

272624

17

ccmp

18

22

18


Parts Identification (continued) - Sprint ST and GT

1. Clutch lever2. Passing button3. Clutch lever adjuster4. Headlight dimmer switch5. Speedometer6. Tachometer7. Warning lights8. Trip computer

9. Front brake fluid reservoir10.Engine stop switch11. Brake lever adjuster12.Front brake lever13.Horn button14.Turn signal switch15.Ignition switch16.Starter button

53 42 6 7 8 9 10 1211

15 1613 14

1

19

Serial Numbers

SERIAL NUMBERS

Vehicle Identification Number (VIN)

The vehicle identification number is stampedinto the steering head area of the frame. Inaddition, it is displayed on a label which isalso adjacent to the steering head.

Record the vehicle identification number inthe space below.

Engine Serial Number

The engine serial number is stamped on theengine crankcase, immediately above theclutch cover.

Record the engine serial number in the spaceprovided below.

ccmy

Serial Numbers

20

This page intentionally left blank

General Information

21

GENERAL INFORMATION

Table of ContentsInstrument Panel Layout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Speedometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Odometer/Trip Meter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Clock/Trip Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Instantaneous Fuel Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Average Fuel Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Trip Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Trip Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Average Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Maximum Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Trip Computer Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Trip Computer Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Clock Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Coolant Temperature Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Fuel Gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Warning Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Turn Signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27High Beam. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Low Fuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Neutral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Low Oil Pressure Warning Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27High Coolant Temperature Warning Light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Engine Management System Malfunction Indicator Light . . . . . . . . . . . . . . . . . . . . . . . . 28Alarm Indicator Light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28ABS (Anti-Lock Brake System) Indicator Light - Sprint GT only . . . . . . . . . . . . . . . . . . . . 29

Ignition Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Ignition Switch/Steering Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Ignition Switch Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

General Information

22

Brake and Clutch Lever Adjusters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Right Handlebar Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Engine Stop Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Starter Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Left Handlebar Switches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Headlight Dimmer Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Turn Signal Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Horn Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Pass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Fuel Requirement/Refuelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Fuel Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34Fuel Tank Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36Filling the Fuel Tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Side Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Center Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38Lifting Handle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Tool Kit and Handbook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Seat - Sprint ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Seat - Sprint GT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Seat Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Helmet Hooks - Sprint GT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Triumph Accessory D-lock Storage - Sprint GT models only . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Pannier System - Sprint GT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Pannier Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Electrical Accessory Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Breaking-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Safe Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Daily Safety Checks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

23

General Information

Instrument Panel Layout

(Sprint ST shown, Sprint GT similar)

1. Tachometer2. Tachometer 'red zone'3. Speedometer4. Odometer/Trip meters5. Clock/Trip computer display6. Scroll/Set/Trip buttons7. Coolant temperature display8. Fuel gauge9. Low oil pressure warning light10.High coolant temperature warning

light

11. Engine management malfunction indicator light

12.ABS warning light (ABS models only)13.Low fuel level indicator light14.Neutral indicator light15.High beam indicator light16.Right turn signal light17. Left turn signal light18.Alarm status indicator light (alarm is

an accessory fit)

ccmk

km/h

17 15 1613 14 8 75

10 12 18111 2 46 9

3

24

General Information

SpeedometerThe speedometer indicates the road speed ofthe motorcycle.

TachometerThe tachometer shows the engine speed inrevolutions per minute - rpm (r/min). On theright side of the tachometer face is the'red zone'. Engine rpm (r/min) in the redzone is above maximum recommendedengine speed and is also above the range forbest performance.

Odometer/Trip Meter

1. Odometer/Trip meter display2. Set button3. Trip button

The odometer shows the total distance thatthe motorcycle has travelled.

The odometer and two trip meters arelocated in the same LCD display as the clockand trip computer. Either trip meter showsthe distance that the motorcycle has travelledsince the meter on display was last reset tozero.

Use the 'trip' button to switch between theodometer and trip meter display modes.Press the 'trip' button repeatedly until thedesired display is visible. The display will scrollthrough in the order:

• Odometer

• Trip Meter 1

• Trip Meter 2

To reset either of the trip meters, select anddisplay the trip meter to be zeroed then pressthe 'trip' button for 2 seconds. After2 seconds, the trip meter on display will resetto zero.

WarningNever allow engine rpm to enter the'red zone' as severe engine damage mayresult.

km/h

12 3ccqu

WarningDo not attempt to switch betweenodometer and trip meter display modes orreset the trip meter with the motorcycle inmotion as this may lead to loss ofmotorcycle control and an accident.

25

General Information

Clock/Trip Computer

1. Clock/Trip computer display2. Scroll button

The clock and trip computer informationappear on the same display.

The trip computer provides an indication offuel consumption, fuel range to empty,speed, time and distance, recorded andcalculated since the last reset.

Each display provides the followinginformation:

Instantaneous Fuel ConsumptionAn indication of the fuel consumption at aninstant in time.

Average Fuel ConsumptionAn indication of the average fuelconsumption is calculated from when the tripcomputer was last reset. After a reset thedisplay will show dashes until 0.1 miles/kmhas been covered.

RangeThis is an indication of the probable distancethat can be travelled on the remaining fuel inthe tank.

Trip DistanceThe total distance travelled, since the lastreset.

Trip TimeThe total time elapsed, since the last reset.

Average SpeedThe average speed is calculated from whenthe trip computer was last reset. After a resetthe display will show dashes until 1 mile/kmhas been covered.

Maximum SpeedThe maximum speed achieved since the lastreset is displayed.

Trip Computer OperationWhen the ignition is switched on, the clockdisplay is shown. To access the trip computerinformation press the 'scroll' button.

Press the 'scroll' button repeatedly until thedesired display is visible. The trip computerwill scroll through in the order:

• Clock

• Instantaneous Fuel Consumption

• Average Fuel Consumption

• Range

• Trip Distance

• Trip Time

• Average Speed

• Maximum Speed

km/h

12ccnl

26

General Information

Trip Computer Reset

1. Trip computer display2. Scroll button3. Set button

The following displays on the trip computercan be reset:

• Average Fuel Consumption

• Trip Distance

• Trip Time

• Average Speed

• Maximum Speed

To reset the trip computer select the desireddisplay, press the 'scroll' and 'set' buttonssimultaneously for 2 seconds. After2 seconds, the selected display will reset.

Note:

• Trip distance, trip time andaverage speed are reset at thesame time.

Clock Adjustment

1. Clock display2. Hours read-out3. Minutes read-out4. Scroll button5. Set button

To reset the clock, select the clock display andpress both 'scroll' and 'set' buttons together.

WarningDo not attempt to switch between the tripcomputer display modes or reset the tripcomputer with the motorcycle in motion asthis may lead to loss of motorcycle controland an accident.

ccnk

km/h

132 WarningDo not attempt to adjust the clock with themotorcycle in motion as this may lead toloss of motorcycle control and an accident.

ccnh

km/h

2 3

5 14

27

General Information

After a short time, the clock's hour display willstart to flash.

To reset the hour display, ensure that thehour display is still flashing then depress the'scroll' button to change the setting. Eachindividual press will change the setting byone digit. If the button is held, the display willcontinuously scroll through in single digitincrements.

When the correct hour display is shown,press the 'set' button. The minutes display willbegin to flash. The minutes display isadjusted in the same way as for the hours.

Once both hours and minutes are correctlyset, press the 'set' button to confirm thesetting. The display will cease to flash.

Coolant Temperature Gauge

1. Coolant temperature gaugeThe coolant temperature gauge indicates thetemperature of the engine coolant.

When the ignition is switched on, all 10 barsof the display will be shown. When theengine is started from cold the display willshow 1 bar. As the temperature increases,more bars will be shown in the display.

The normal temperature range is between3 and 6 bars.

If the coolant temperature becomes too high,the display will show 9 bars and will start toflash. The high coolant temperature warninglight in the tachometer will also beilluminated.

If the coolant temperature increases further,all 10 bars of the display will flash. The highcoolant temperature warning light in thetachometer will remain illuminated.

ccnj

1

28

General Information

Fuel Gauge

1. Fuel gaugeThe fuel gauge indicates the amount of fuelin the tank.

With the ignition switched on, the number ofbars shown in the display indicates the levelof fuel in the tank.

When the fuel tank is full, all 10 bars aredisplayed and when empty, no bars aredisplayed. Other gauge markings indicateintermediate fuel levels between full andempty.

When 2 bars are displayed, the low fuelwarning light will illuminate. This indicatesthere are approximately 1.05 US gal(4.0 liters) of fuel remaining in the tank andyou should refuel at the earliest opportunity.

After refuelling, the fuel gauge and range toempty information will be updated only whileriding the motorcycle.

Depending on the riding style, this could takeapproximately 5 minutes.

CautionDo not continue to run the engine if eitherof the high temperature warnings aredisplayed as severe engine damage mayresult.

ccni

1

29

General Information

Warning Lights

Turn SignalsWhen the turn signal switch ispushed to the left or right, thecorresponding turn signal lightwill flash on and off at the same

speed as the turn signals.

High BeamWhen the ignition is switchedon and the headlight dimmerswitch is set to 'high beam', the

high beam warning light will illuminate.

Low FuelThe low fuel indicator willilluminate when there areapproximately 1.05 US gal (4.0liters) of fuel remaining in the

tank.

NeutralThe neutral warning lightindicates when the transmissionis in neutral (no gear selected).

The warning light will illuminate when thetransmission is in neutral with the ignitionswitch in the ON position.

Low Oil Pressure Warning LightWith the engine running, if theengine oil pressure becomesdangerously low, the low oil

pressure warning light in the tachometer willilluminate.

The low oil pressure warning light in thetachometer will illuminate if the ignition isswitched on without running the engine.

High Coolant Temperature Warning Light

With the engine running, if theengine coolant temperaturebecomes dangerously high, thehigh coolant temperature

warning light in the tachometer willilluminate.

The high coolant temperature warning lightin the tachometer will illuminate if the ignitionis switched on without running the engine.

CautionStop the engine immediately if the low oilpressure warning light illuminates. Do notrestart the engine until the fault has beenrectified.

Severe engine damage will result fromrunning the engine when the low oilpressure warning light is illuminated.

CautionStop the engine immediately if the highcoolant temperature warning lightilluminates. Do not restart the engine untilthe fault has been rectified.

Severe engine damage will result fromrunning the engine when the high coolanttemperature warning light is illuminated.

30

General Information

Engine Management System Malfunction Indicator Light

The malfunction indicator lightfor the engine managementsystem illuminates when the

ignition is switched on (to indicate that it isworking) but should not become illuminatedwhen the engine is running.

If the malfunction indicator light becomesilluminated when the engine is running, thisindicates that a fault has occurred in one ormore of the systems controlled by the enginemanagement system. In such circumstances,the engine management system will switch to'limp-home' mode so that the journey maybe completed, if the fault is not so severe thatthe engine will not run.

Note:

• If the malfunction indicator lightflashes when the ignition isswitched on, contact an authorizedTriumph dealer as soon as possibleto have the situation rectified. Inthese circumstances the enginewill not start.

Alarm Indicator LightThe alarm light will illuminatewhen the conditions describedin the accessory alarm

instructions are met.

The light does not function unless an alarm isfitted.

WarningReduce speed and do not continue to ridefor longer than is necessary with themalfunction indicator light illuminated. Thefault may adversely affect engineperformance, exhaust emissions and fuelconsumption. Reduced engineperformance could cause a dangerousriding condition, leading to loss of controland an accident. Contact an authorizedTriumph dealer as soon as possible to havethe fault checked and rectified.

31

General Information

ABS (Anti-Lock Brake System) Indicator Light - Sprint GT only

The ABS indicator lightilluminates to show that the ABSfunction is not available.

Illumination is normal after engine start-up,and until the motorcycle first reaches a speedexceeding 6 mph (10 km/h). Unless there is afault, it should not illuminate again until theengine is restarted.

If the indicator light becomes illuminated atany other time while riding it indicates thatthe ABS has a malfunction that requiresinvestigation.

See also Braking on page 57.

Ignition Key

1. Key number tag2. Key blade for alarm systemIn addition to operating the steeringlock/ignition switch, the ignition key isrequired to operate the seat lock and fueltank cap.

When the motorcycle is delivered from thefactory, two ignition keys are suppliedtogether with a small tag bearing the keynumber, and a spare key blade for use withTriumph accessory alarm. Make a note of thekey number and store the spare key, keyblade and key number tag in a safe placeaway from the motorcycle.

Your authorized Triumph dealer can supply areplacement key cut from details of the keynumber or can cut a new key using theoriginal as a master.

WarningIf the ABS is not functioning, the brakesystem will continue to function as anon-ABS braking system. Do not continueto ride for longer than is necessary with theindicator light illuminated. Contact anauthorized Triumph dealer as soon aspossible to have the fault checked andrectified. In this situation, braking too hardwill cause the wheels to lock resulting inloss of control and an accident.

ceom

1

2

32

General Information

Note:

• On Sprint ST models, three unusedlocks are supplied with themotorcycle. These are for use withthe optional accessory panniersand top box and will ensure that,when fitted, the same key willoperate all the locks on themotorcycle.

• On Sprint GT models, one unusedlock is supplied with themotorcycle. This is for use with theoptional accessory top box and willensure that, when fitted, the samekey will operate all the locks onthe motorcycle.

Ignition Switch/Steering Lock

1. Ignition switch/Steering lock2. LOCK position3. OFF position4. ON position5. PARK position

Ignition Switch PositionsThis is a four position, key operated switch.The key can be removed from the switchonly when it is in the OFF, LOCK or P (PARK)position.

TO LOCK: Turn the key to the OFF position,push and fully release the key, then rotate itto the LOCK position.

PARKING: Turn the key from the LOCKposition to the P position. The steering willremain locked.

CautionDo not store the spare key with themotorcycle as this will reduce all aspects ofsecurity.

VVVVV

VV

VV

VV

VV

V

VV V V V V V V V V

VV

VV

VV

VV

VV

VVVV

IG

NIT

ION

PUSH

OFF ON

P

23

4

5

1

33

General Information

Note:

• Do not leave the steering lock inthe P position for long periods oftime as this will cause the batteryto discharge.

Brake and Clutch Lever Adjusters

1. Adjuster wheel2. Triangular mark

An adjuster is fitted to both the front brakeand clutch levers. The adjusters allow thedistance from the handlebar to the levers tobe changed to one of four positions, to suitthe span of the operator's hands.

To adjust the levers, push each lever forwardand turn the adjuster wheel to align one ofthe numbered positions with the triangularmark on the lever holder.

The distance from the handlebar grip to thereleased lever is shortest when set to numberfour and longest when set to number one.

WarningFor reasons of security and safety, alwaysmove the ignition switch to the OFFposition and remove the key when leavingthe motorcycle unattended.

Any unauthorized use of the motorcyclemay cause injury to the rider, other roadusers and pedestrians and may also causedamage to the motorcycle.

WarningWith the key in the LOCK or P position thesteering will become locked.

Never turn the key to the LOCK or Ppositions while the motorcycle is moving asthis will cause the steering to lock. Lockedsteering will cause loss of motorcyclecontrol and an accident.

34

General Information

Right Handlebar Switches

1. Engine stop switch2. Starter button

Engine Stop SwitchIn addition to the ignition switch being turnedto the ON position, the engine stop switchmust be in the RUN position for themotorcycle to operate.

The engine stop switch is for emergency use.If an emergency arises which requires theengine to be stopped, move the engine stopswitch to the STOP position.

Note:

• Although the engine stop switchstops the engine, it does not turnoff all the electrical circuits andmay cause difficulty in restartingthe engine due to a dischargedbattery. Ordinarily, only theignition switch should be used tostop the engine.

WarningDo not attempt to adjust the levers with themotorcycle in motion as this may lead toloss of motorcycle control and an accident.

After adjusting the levers, operate themotorcycle in an area free from traffic togain familiarity with the new lever setting.Do not loan your motorcycle to anyone asthey may change the lever setting from theone you are familiar with causing loss ofcontrol or an accident.

ccmm

21

35

General Information

Starter ButtonThe starter button operates the electricstarter. For the starter to operate, the clutchlever must be pulled to the handlebar.

Note:

• Even if the clutch lever is pulled tothe handlebar, the starter will notoperate if the side stand is downand a gear is engaged.

Left Handlebar Switches

1. Headlight dimmer switch2. Turn signal switch3. Horn button4. Pass button

Headlight Dimmer SwitchHigh or low beam can be selected with theheadlight dimmer Switch. To select highbeam, push the switch forward. To select lowbeam, push the switch rearwards. When thehigh beam is turned on, the high beamindicator light will illuminate.

Note:

• A lighting on/off switch is notfitted to this model. The headlight,brake/tail Light and license platelight all function automaticallywhen the ignition is turned to theON position.

CautionDo not leave the ignition switch in the ONposition unless the engine is running asthis may cause damage to electricalcomponents and will discharge the battery.

ccml

4

3 2

1

36

General Information

Turn Signal SwitchWhen the turn signal switch is pushed to theleft or right and released, the correspondingturn signals will flash on and off. To turn offthe turn signals, push and release the switch.

Horn ButtonWhen the horn button is pushed, with theignition switch turned to the ON position, thehorn will sound.

Pass ButtonWhen the pass button is pressed, theheadlight main beam will be switched on. Itwill remain on as long as the button is held inand will turn off as soon as the button isreleased.

Fuel Requirement/Refuelling

Fuel Grade

This Triumph motorcycle is designed to runon unleaded gasoline with a CLC or AKIoctane rating (R+M)/2 of 89 or higher.Federal regulations require that pumpsdelivering unleaded gasoline are marked'UNLEADED' and that the Cost of LivingCouncil (CLC) or Anti-Knock Index (AKI)octane rating is also displayed. These ratingsare an average of the Research OctaneNumber (RON) and the Motor OctaneNumber (MON).

CautionThe exhaust system for this model is fittedwith a catalytic converter to help reduceexhaust emission levels. The catalyticconverter can be permanently damaged ifthe motorcycle is allowed to run out of fuelor if the fuel level is allowed to get verylow. Always ensure you have adequate fuelfor your journey.

CautionThe use of leaded fuel is illegal in mostcountries, states or territories. Use ofleaded fuel will damage the catalyticconverter.

Pb

cbny

37

General Information

Note:

• If 'knocking' or 'pinging' occurs at asteady engine speed under normalload, use a different brand ofgasoline or gasoline which has ahigher octane rating.

Oxygenated GasolineTo help in meeting clean air standards, someareas of the U.S. use oxygenated gasoline tohelp reduce harmful emissions. Thesegasolines are a blend of conventionalgasoline and another compound such asalcohol. This Triumph motorcycle will give itsbest performance when using unleadedgasoline. However, the following should beused as a guide if you use any oxygenatedfuels.

EthanolEthanol fuel is a mixture of 10% Ethanol and90% gasoline and is often described underthe names 'gasohol', 'Ethanol enhanced', or'contains Ethanol'. This fuel may be used inyour Triumph motorcycle.

MTBE (Methyl Tertiary Butyl Ether)The use of gasolines containing up to 15%MTBE (Methyl Tertiary Butyl Ether) ispermitted in this Triumph motorcycle.

Methanol

CautionFuels containing methanol should not beused as damage to components in the fuelsystem can be caused by contact withmethanol.

CautionBecause of the generally higher volatility ofoxygenated fuels, starting, engineresponse and fuel consumption may beadversely affected by their use. Should anyof these difficulties be experienced, run themotorcycle on normal unleaded gasoline.

WarningTo help reduce hazards associated withrefuelling, always observe the followingfuel safety instructions:

Gasoline (fuel) is highly flammable and canbe explosive under certain conditions.When refuelling, turn the ignition switch tothe 'OFF' position.

Do not smoke.

Do not use a mobile telephone.

Make sure the refuelling area is wellventilated and free from any source offlame or sparks. This includes anyappliance with a pilot light.

Never fill the tank until the fuel level risesinto the filler neck. Heat from sunlight orother sources may cause the fuel toexpand and overflow creating a firehazard.

After refuelling always check that the fuelfiller cap is correctly closed and locked.

Because gasoline (fuel) is highlyflammable, any fuel leak or spillage, or anyfailure to observe the safety advice givenabove will lead to a fire hazard, whichcould cause damage to property, injury topersons or death.

38

General Information

Fuel Tank Cap

1. Ignition switch key2. Fuel tank cap

To open the fuel tank cap, lift up the flapcovering the lock itself. Insert the key into thelock and turn the key clockwise.

To close and lock the cap, push the cap downinto place with the key inserted, until the lock'clicks' into place. Withdraw the key and closethe key cover.

Filling the Fuel TankAvoid filling the tank in rainy or dustyconditions where airborne material cancontaminate the fuel.

Fill the fuel tank slowly to help preventspillage. Do not fill the tank to a level abovethe bottom of the filler neck. This will ensurethere is enough air space to allow for fuelexpansion if the fuel inside the tank expandsthrough absorption of heat from the engineor from direct sunlight.

1. Maximum fuel level2. Fuel filler neck3. Air space

After refuelling always check that the fuelfiller cap is correctly closed and locked.

CautionClosing the cap without the key insertedwill damage the cap, tank and lockmechanism.

1

2

cbmm

CautionContaminated fuel may cause damage tofuel system components.

1 2 3

cbdf

39

General Information

Stands

Side Stand

1. Side standThe motorcycle is equipped with a side standon which the motorcycle can be parked.

Note:

• When using the side stand, alwaysturn the handlebars fully to the leftand leave the motorcycle in firstgear.

WarningOverfilling the tank can lead to fuelspillage.

If fuel is spilled, thoroughly clean up thespillage immediately and dispose of thematerials used safely.

Take care not to spill any fuel on theengine, exhaust pipes, tires or any otherpart of the motorcycle.

Because fuel is highly flammable, any fuelleak or spillage, or any failure to observethe safety advice given above may lead toa fire hazard, which could cause damage toproperty and injury or death to persons.

Fuel spilled near to, or onto the tires willreduce the tire’s ability to grip the road.This will result in a dangerous ridingcondition potentially causing loss ofmotorcycle control and an accident.

WarningThe motorcycle is fitted with an interlocksystem to prevent it from being riddenwith the side stand in the down position.

Never attempt to ride with the side standdown or interfere with the interlockmechanism as this will cause a dangerousriding condition leading to loss ofmotorcycle control and an accident.

1ccnn

40

General Information

Whenever the side stand is used beforeriding, always ensure that the stand is fully upafter first sitting on the motorcycle.

For instructions on safe parking, refer to the'How to Ride the Motorcycle' section.

Center Stand

1. Center stand2. Lifting handle (Sprint ST shown,

Sprint GT similar)

To set the motorcycle up on the center stand,step down firmly on the foot-finder part ofthe stand, then lift the motorcycle up and tothe rear using the lifting handle as ahandhold.

For instructions on safe parking, refer to the'How to Ride the Motorcycle' section.

Lifting HandleThe lifting handle is located on the left handside of the motorcycle, and is the upper edgeof the pillion footrest hanger.

Always use the lifting handle or grab rail topark the motorcycle on the center stand.

1

2

ccpo

WarningDo not use the side panel or seat as ahand-hold when placing the motorcycle onthe center stand as this will cause damage.

41

General Information

Tool Kit and Handbook

1. Tool kit/Handbook location (Sprint ST shown)

The tool kit and handbook are located in alockable stowage box on the right hand sideof the motorcycle.

To gain access, insert the ignition key into thelock and remove the cover.

Note:

• The stowage box is notwaterproof.

Seat - Sprint ST

1. Seat fastenersTwo seat fasteners are located under the rearedge of the seat. To remove the seat, pushback the rear edge of the seat and unscrewthe exposed fasteners. Remove the fastenersand collect the two flanged washers. Raise theseat and slide rearwards for completeremoval from the motorcycle.

To re-install the seat, engage the seat'stongues under the fuel tank and slide the seatforwards to engage.

Re-install the flanged washers and fasteners.

Tighten the seat fasteners to27 lbf in (3 Nm).

ccpm

1

WarningThe muffler heat shield is located directlybelow the seat and may be hot to thetouch. Do not touch the heat shield ascontact with the hot heat shield may causethe skin to become burned.

ccxg 1

42

General Information

Seat - Sprint GT

1. Seat lockThe seat lock is located on the left hand sideof the battery tray, in line with the footrestmounting rail. To remove the seat, insert theignition key into the seat lock and turn itanti-clockwise while pressing down on therear of the seat. This will release the seat fromits lock and allow it to be slid rearwards forcomplete removal from the motorcycle.

To re-install the seat, engage the seat's twofront hooks under the fuel tank, engage thecenter hooks under the rear subframe bridgeand slide the seat fully forwards. Press downat the rear to engage in the seat lock.

Seat CareTo prevent damage to the seat or seat cover,care must be taken not to drop or lean theseat against any surface which may damagethe seat or seat cover.

WarningTo prevent detachment of the seat duringriding, after installation always grasp theseat and pull firmly upwards. If the seat isnot correctly secured, it will detach fromthe lock. A loose or detached seat couldcause loss of motorcycle control and anaccident.

cgdi

1

CautionTo prevent damage to the seat or seatcover, care must be taken not to drop theseat. Do not lean the seat against themotorcycle or any surface which maydamage the seat or seat cover. Instead,place the seat, with the seat cover facingupwards, on a clean, flat surface which iscovered with a soft cloth.

Do not place any item on the seat whichmay cause damage or staining to the seatcover.

43

General Information

Helmet Hooks - Sprint GTTwo helmets can be secured to themotorcycle using the helmet hooks beneaththe seat.

1. Helmet hooks (right hand shown)To attach a helmet to the motorcycle, removethe seat and loop the helmet chin strap overthe hook. To secure the helmet, re-fit the seatand lock into position.

Triumph Accessory D-lock Storage - Sprint GT models onlySpace is provided under the seat to store aTriumph accessory D-lock (available fromyour Triumph dealer).

Secure the lock as follows:

Thread the strap through the rear fender locksupport from the rear, so that the bucklefaces towards the rear of the motorcycle.

Position the U-section of the lock to the rearfender support features, ensuring the openend faces towards the rear of the motorcycle.

Position the lock body to the support on therear fender.

Thread the strap over the lock and throughthe buckle, and pull tight, fastening the hookand loop part of the strap to secure.

1. Lock U-section2. Lock3. Hook and loop strap4. Rear fender lock support feature5. Buckle

WarningNever ride the motorcycle with helmet(s)secured to the helmet hooks. Riding themotorcycle with helmet(s) secured to thehelmet hooks may cause the motorcycle tobecome unstable leading to loss of controland an accident.

CautionDo not allow helmets to rest against a hotmuffler. The helmet may be damaged.

1

cgdr

cgef

5

31

4

2

44

General Information

Pannier System - Sprint GT

To install each pannier:

Note:

• The same procedure can befollowed to remove and mount theleft hand or the right handpanniers.

• The pannier is marked in threepositions around the lock barrel.To lock, open or release thepanniers, the key slot must alignwith the corresponding symbolsaround the barrel as shown.

1. Key slot (shown in the LOCK position)

2. Lock position symbol3. Unlock position symbol4. Release position symbol

Insert the key into the lock. Turn the key tothe RELEASE position and lift the carryinghandle to its fully raised position.

1. Lock2. Carrying handlePosition the pannier to the motorcycle andengage the fixed hooks of the pannier withthe pannier mounting points.

REL

EASE

••LOCK

•OPEN

2

34

1

1

cgds

2

45

General Information

Ensure that the lower mounting bracket fitsinto the locating cup moulded into the frontof the pannier.

1. Pannier fixed hooks2. Pannier mountings3. Locating bracket4. Locating cupLock the pannier to the rail by pressing thecarrying handle to the fully closed positionwhile turning the key to the LOCK position.Remove the key.

To remove each pannier:

Note:

• The same procedure can befollowed to remove and mount theleft hand or the right handpanniers.

1. Lock2. Carrying handleTo unlock and remove the pannier from thepannier mountings, turn the key to theRELEASE position and lift the carrying handleto its fully raised position. Lift the pannier freefrom the pannier mountings.

cgdu

2 1

34 1

cgds

2

46

General Information

Pannier Operation

1. Key slot (shown in the LOCK position)

2. Lock position symbol3. Unlock position symbol4. Release position symbolTo unlock and open the pannier, insert thekey and turn it to the UNLOCK position,then press down on the latch plate. The lidcan then be opened.

1. Lock2. Latch plate

Note:

• Due to the effective nature of thepannier lid seal, reasonable forcemay be required to close the lid tothe second latch position.

To close and lock the pannier, close the liduntil the second 'click' is heard. Turn the keyto the LOCK position and remove it.

2

34

1

1

cgds

2

CautionThe pannier lid has two latch positions; thefirst latch position acts as a safety catch.Always ensure the pannier lid is fully closedon to the second latch position, as thepannier will not fully seal on the first latchposition. Riding the motorcycle with thepannier lid in this position may allow wateror dust ingress into the pannier, causingdamage to the pannier contents.

WarningThe maximum safe load for each pannieris 16.5 lbs (7.5 kg). Never exceed thisloading limit as this may cause themotorcycle to become unstable leading toloss of control and an accident.

WarningThe two panniers fitted to this motorcycleare designed to be fitted as a pair. Neverride the motorcycle with only one pannierinstalled. Riding the motorcycle with onepannier installed may cause the motorcycleto become unstable leading to loss ofcontrol and an accident.

47

General Information

WarningThe two panniers fitted to this motorcycleare linked by a factory-adjusted link bar toenhance stability. This link bar allows asmall amount of sideways panniermovement, independently of themotorcycle. Do not remove or adjust the link bar asmotorcycle stability will be affected. Ridingthe motorcycle with the link bar removedor incorrectly adjusted may cause themotorcycle to become unstable leading toloss of control and an accident.

WarningIncorrect loading may result in an unsaferiding condition leading to an accident.

Always ensure any loads carried are evenlydistributed on both sides of the motorcycle.Ensure that the load is correctly securedsuch that it will not move around while themotorcycle is in motion.

Always check the load security regularly(though not while the motorcycle is inmotion) and ensure that the load does notextend beyond the rear of the motorcycle.Never exceed the maximum vehicleloading weight of:

• Sprint ST - 473 lbs (215 kg);

• Sprint GT - 473 lbs (215 kg).

This maximum loading weight is made upfrom the combined weight of the rider,passenger, any accessories fitted and anyload carried.

WarningAfter installing or removing the panniers,operate the motorcycle in a safe area freefrom traffic to gain familiarity with the newhandling characteristics. Operation whennot familiar with the new characteristics ofthe motorcycle may result in loss of controland an accident.

WarningNever ride an accessory equippedmotorcycle, or a motorcycle carrying apayload of any kind, at speeds above80 mph (130 km/h). In either/both ofthese conditions, speeds in excess of80 mph (130 km/h) should not beattempted even where the legal speedlimit permits this.

The presence of accessories and/orpayload will cause changes in the stabilityand handling of the motorcycle.

Failure to allow for changes in motorcyclestability may lead to loss of control or anaccident. Remember that the 80 mph(130 km/h) absolute limit will reduce bythe installation of non-approvedaccessories, incorrect loading, worn tires,overall motorcycle condition and poor roador weather conditions.

48

General Information

Electrical Accessory Socket

1. Electrical accessory socketAn electrical accessory socket is provided onthe left hand side of the motorcycle.

The socket will provide a 12 Volt electricalsupply. The socket is protected by a 10 Ampfuse therefore items with a current drawgreater than 10 amps must not be pluggedinto the socket.

A plug, suitable for use with the accessorysocket, is available from your authorizedTriumph dealer.

WarningThis motorcycle must not be operatedabove the legal road speed limit except inauthorized closed-course conditions.

WarningOnly operate this Triumph motorcycle athigh speed in closed-course on-roadcompetition or on closed-course racetracks.High-speed operation should only beattempted by riders who have beeninstructed in the techniques necessary forhigh-speed riding and are familiar with themotorcycle's characteristics in allconditions.

High-speed operation in any othercircumstances is dangerous and will lead toloss of motorcycle control and an accident.

cgdj

1

49

General Information

Breaking-In

Breaking-in is the name given to the processthat occurs during the first hours of a newvehicle's operation.

In particular, internal friction in the engine willbe higher when components are new. Lateron, when continued operation of the enginehas ensured that the components have'bedded in', this internal friction will begreatly reduced.

A period of careful breaking-in will ensurelower exhaust emissions, and will optimizeperformance, fuel economy and longevity ofthe engine and other motorcyclecomponents.

During the first 500 miles (800 kilometers):

• Do not use full throttle.

• Avoid high engine speeds at alltimes.

• Avoid riding at one constant enginespeed, whether fast or slow, for along period of time.

• Avoid aggressive starts, stops, andrapid accelerations, except in anemergency.

• Do not ride at speeds greater than3/4 of maximum engine speed.

From 500 to 1000 miles (800 to1500 kilometers):

• Engine speed can gradually beincreased to the rev limit for shortperiods.

Both during and after running-in has beencompleted:

• Do not over-rev the engine whencold.

• Do not lug the engine. Alwaysdownshift before the engine beginsto 'struggle'.

• Do not ride with engine speedsunnecessarily high. Shifting up agear helps reduce fuel consumption,reduces noise and helps to protectthe environment.

R.P.M.

50

General Information

Safe Operation

Daily Safety Checks

Check the following items each day beforeyou ride. The time required is minimal, andthese checks will help ensure a safe, reliableride.

If any irregularities are found during thesechecks, refer to the Maintenance andAdjustment section or see your authorizedTriumph dealer for the action required toreturn the motorcycle to a safe operatingcondition.

Check:

Fuel: Adequate supply in tank, no fuel leaks(page 36).

Engine Oil: Correct level on dipstick. Addcorrect specification oil as required. No leaksfrom the engine or oil cooler (page 75).

Drive Chain: Check drive chain for correctadjustment and lubrication (page 85).

Tires/Wheels: Correct inflation pressures(when cold). Tread depth/wear, tire/wheeldamage, punctures etc. (page 99).

Nuts, Bolts, Fasteners: Visually check thatsteering and suspension components, axles,and all controls are properly tightened orfastened. Inspect all areas for loose/damagedfasteners.

Steering Action: Smooth but not loose fromlock to lock. No binding of any of the controlcables (page 94).

Brakes: Pull the brake lever and push thebrake pedal to check for correct resistance.Investigate any lever/pedal where the travel isexcessive before meeting resistance, or ifeither control feels spongy in operation(page 88).

WarningFailure to perform these checks every daybefore you ride may result in seriousmotorcycle damage or an accident causingserious injury or death.

b b

51

General Information

On models equipped with ABS: Ensurethat the ABS warning light does not remainilluminated at speeds above 6 mph (10 km/h)when moving off (page 57).

Brake Pads: There should be more than0.06 in (1.5 mm) of friction materialremaining on all the pads (page 88).

Brake Fluid Levels: No brake fluid leakage.Brake fluid levels must be between the MAXand MIN marks on both reservoirs (page 91).

Front Forks: Smooth action. No leaks fromfork seals (page 95).

Throttle: Throttle grip free play0.08 - 0.12 in (2-3 mm. Ensure that thethrottle grip returns to the idle positionwithout sticking (page 82).

Clutch: Smooth operation and correct cablefree play (page 84).

Coolant: No coolant leakage. Check thecoolant level in the expansion tank (when theengine is cold) (page 79).

Electrical Equipment: All lights and hornfunction correctly (page 35).

Engine Stop: Stop switch turns the engineoff (page 54).

Stands: Return to the fully up position byspring tension. Return springs not weak ordamaged (page 39).

General Information

52


53

How to Ride the Motorcycle

HOW TO RIDE THE MOTORCYCLE

Table of ContentsTo Stop the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

To Start the Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Moving Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Shifting Gears . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Braking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

ABS (Anti-Lock Brake System) - Sprint GT only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Parking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Considerations for High-Speed Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Luggage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Fuel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Electrical Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

54


To Stop the Engine

1. Engine stop switch2. Starter button3. Neutral indicator light4. ON position5. Ignition switch

Close the throttle completely.

Select neutral.

Turn the ignition switch off.

Select first gear.

Support the motorcycle on a firm, levelsurface with the side or center stand.

Lock the steering.

To Start the EngineCheck that the engine stop switch is in theRUN position.

Ensure the transmission is in neutral.

Turn the ignition switch on.

Note:

• When the ignition is switched on,the tachometer and speedometerneedles will quickly sweep fromzero to maximum and then returnto zero. The instrument warninglights will illuminate and will thengo off (except those whichnormally remain on until theengine starts - see page 29). It isnot necessary to wait for theneedle to return to zero beforestarting the engine.

• In very cold conditions, part openthe throttle to aid cold starting.Return to the closed position oncethe engine has started.

TUV

213

45

ccpb

CautionThe engine should normally be stopped byturning the ignition switch to the OFFposition. The engine stop switch is foremergency use only. Do not leave theignition switched on with the enginestopped. Electrical damage may result.

55


Pull the clutch lever fully into the handlebar.

Leaving the throttle fully closed, push thestarter button until the engine starts.

• The motorcycle is equipped withstarter lockout switches. The switchesprevent the electric starter fromoperating when the transmission isnot in neutral with the side standdown.

• If the side stand is extended whilethe engine is running, and thetransmission is not in neutral thenthe engine will stop regardless ofclutch position.

Moving OffPull in the clutch lever and select first gear.Open the throttle a little and let out the clutchlever slowly. As the clutch starts to engage,open the throttle a little more, allowingenough engine speed to avoid stalling.

WarningNever start the engine or run the engine ina confined area. Exhaust fumes arepoisonous and can cause loss ofconsciousness and death within a shortperiod of time. Always operate yourmotorcycle in the open-air or in an areawith adequate ventilation.

CautionDo not operate the starter continuously formore than 5 seconds as the starter motorwill overheat and the battery will becomedischarged. Wait 15 seconds between eachoperation of the starter to allow for coolingand recovery of battery power.

Do not let the engine idle for long periodsas this may lead to overheating which willcause damage to the engine.

CautionThe low oil pressure warning light shouldgo out shortly after the engine starts.

If the low oil pressure warning light stayson after starting the engine, stop theengine immediately and investigate thecause. Running the engine with low oilpressure will cause severe engine damage.

56


Shifting Gears

1. Gear shift pedalClose the throttle while pulling in theclutch lever. Shift into the next higheror lower gear. Open the throttle partway, while releasing the clutch lever.Always use the clutch when shiftinggear.

Note:

• The gear shift mechanism is the'positive stop' type. This meansthat, for each movement of thegear shift pedal, you can onlyselect each gear, one after theother, in ascending or descendingorder.

WarningTake care to avoid opening the throttle toofar or too fast in any of the lower gears asthis can lead to the front wheel lifting fromthe ground (pulling a 'wheelie') and to therear tire breaking traction (wheel spin).

Always open the throttle cautiously,particularly if you are unfamiliar with themotorcycle, as a 'wheelie' or loss of tractionwill cause loss of motorcycle control and anaccident.

1

43

1

5

N2

6

WarningDo not shift to a lower gear at speeds thatwill cause excessive engine rpm (r/min).This can lock the rear wheel causing loss ofcontrol and an accident. Engine damagemay also be caused. Shifting down shouldbe done such that low engine speeds willbe ensured.

57


Braking

1. Front brake lever

1. Rear brake pedal

Triumph strongly recommends that all riderstake a course of instruction, which includesadvice on safe brake operation.

WarningWHEN BRAKING, OBSERVE THE

FOLLOWING:Close the throttle completely, leaving theclutch engaged to allow the engine to helpslow down the motorcycle.

Shift down one gear at a time such that thetransmission is in first gear when themotorcycle comes to a complete stop.

When stopping, always apply both brakesat the same time. Normally the front brakeshould be applied a little more than therear.

Shift down or fully disengage the clutch asnecessary to keep the engine from stalling.

Never lock the brakes, as this may causeloss of control of the motorcycle and anaccident.

2

1

3

4

1

jaim

WarningFor emergency braking, disregarddownshifting, and concentrate on applyingthe front and rear brakes as hard aspossible without skidding. Riders shouldpractice emergency braking in a traffic-freearea. (See ABS warnings below/over.)

Incorrect brake technique could result inloss of control and an accident.

1

ceyr

58


WarningFor your safety, always exercise extremecaution when braking, (whether or notABS is fitted), accelerating or turning asany improper action can cause loss ofcontrol and an accident. Independent useof the front or rear brakes reduces overallbraking performance. Extreme brakingmay cause either wheel to lock, reducingcontrol of the motorcycle and causing anaccident (see ABS warnings below).

When possible, reduce speed or brakebefore entering a turn as closing thethrottle or braking in mid-turn may causewheel slip leading to loss of control and anaccident.

When riding in wet or rainy conditions, oron loose surfaces, the ability to maneuverand stop will be reduced. All of youractions should be smooth under theseconditions. Sudden acceleration, braking orturning may cause loss of control and anaccident.

WarningWhen descending a long, steep gradient,use engine braking by down shifting anduse the brakes intermittently. Continuousbrake application can overheat the brakesand reduce their effectiveness.

Riding with your foot on the brake pedalor your hands on the brake lever mayactuate the brake light, giving a falseindication to other road users. It may alsooverheat the brake, reducing brakingeffectiveness.

Do not coast with the engine switched off,and do not tow the motorcycle. Thetransmission is pressure-lubricated onlywhen the engine is running. Inadequatelubrication may cause damage or seizureof the transmission, which can lead tosudden loss of motorcycle control and anaccident.

59


ABS (Anti-Lock Brake System) - Sprint GT only

ABS Warning LightThe ABS indicator lightilluminates to show that the ABSfunction is not available.

Illumination is normal after engine start-up,and until the motorcycle first reaches a speedexceeding 6 mph (10 km/h). Unless there is afault, it should not illuminate again until theengine is restarted.

If the indicator light becomes illuminated atany other time while riding, it indicates thatthe ABS has a malfunction that requiresinvestigation.

Note:

• Normally, the rider will perceiveABS operation as a harder feel or apulsation of the brake lever andpedal. As the ABS is not anintegrated braking system and itdoes not control both the frontand rear brake at the same time,this pulsation may be felt in thelever, the pedal or both.

• The ABS may be activated bysudden upward or downwardchanges in the road surface.

WarningWhere fitted, ABS prevents the wheelsfrom locking, therefore maximizing theeffectiveness of the braking system inemergencies and when riding on slipperysurfaces. The potentially shorter brakingdistances ABS allows under certainconditions are not a substitute for goodriding practice.

Always ride within the legal speed limit.

Never ride without due care and attentionand always reduce speed in considerationof weather, road and traffic conditions.

Take care when cornering. If the brakes areapplied in a corner, ABS will not be able tocounteract the weight and momentum ofthe motorcycle. This can result in loss ofcontrol and an accident.

Under some circumstances it is possiblethat a motorcycle equipped with ABS mayrequire a longer stopping distance than anequivalent motorcycle without ABS.

WarningIf the ABS is not functioning, the brakesystem will continue to function as anon-ABS braking system. Do not continueto ride for longer than is necessary with theindicator light illuminated. Contact anauthorized Triumph dealer as soon aspossible to have the fault checked andrectified. In this situation, braking too hardwill cause the wheels to lock resulting inloss of control and an accident.

60


Parking

Select neutral and turn the ignition switch tothe OFF position.

Lock the steering to help prevent theft.

Always park on a firm, level surface toprevent the motorcycle from falling.

When parking on a hill, always park facinguphill to prevent the motorcycle from rollingoff the stand. Engage first gear to prevent themotorcycle from moving.

On a lateral (sideways) incline, always parksuch that the incline naturally pushes themotorcycle towards the side stand.

Do not park on a lateral (sideways) incline ofgreater than 6° and never park facingdownhill.

WarningThe ABS warning light will illuminate whenthe rear wheel is driven at high speed formore than 30 seconds when themotorcycle is on a stand. This reaction isnormal.

When the ignition is switched off and themotorcycle is re-started, the warning lightwill illuminate until the motorcycle reachesa speed exceeding 19 mph (30 km/h).

WarningThe ABS computer operates by comparingthe relative speed of the front and rearwheels. Use of non-recommended tirescan affect wheel speed and cause the ABSfunction not to operate, potentially leadingto loss of control and an accident inconditions where the ABS would normallyfunction.

ccmt

61


Note:

• When parking near traffic at night,or when parking in a locationwhere parking lights are requiredby law, leave the tail, license plateand position lights on by turningthe ignition switch to P (Park).

Do not leave the switch in the P position forlong periods of time as this will discharge thebattery.

Ensure that the side stand is fully retractedbefore riding off.

WarningDo not park on a soft or on a steeplyinclined surface. Parking under theseconditions may cause the motorcycle to fallover causing damage to property andpersonal injury.

WarningGasoline is extremely flammable and canbe explosive under certain conditions. Ifparking inside a garage or other structure,be sure it is well ventilated and themotorcycle is not close to any source offlame or sparks. This includes anyappliance with a pilot light.

Failure to follow the above advice maycause a fire resulting in damage toproperty or personal injury.

WarningThe engine and exhaust system will be hotafter riding. DO NOT park wherepedestrians and children are likely to touchthe motorcycle.

Touching any part of the engine or exhaustsystem when hot may cause unprotectedskin to become burnt.

62


Considerations for High-Speed Operation

GeneralEnsure the motorcycle has been maintainedaccording to the scheduled maintenancechart.

SteeringCheck that the handlebar turns smoothlywithout excessive free play or tight spots.Ensure that the control cables do not restrictthe steering in any way.

LuggageMake certain that any luggage containers areclosed, locked and securely fitted to themotorcycle. Ensure panniers are evenly loaded.Ensure the motorcycle is not overloaded.

WarningThis Triumph motorcycle should beoperated within the legal speed limits forthe particular road travelled. Operating amotorcycle at high speeds can bepotentially dangerous since the timeavailable to react to given traffic situationsis greatly reduced as road speed increases.Always reduce speed in consideration ofweather and traffic conditions.

WarningOnly operate this Triumph motorcycle athigh speed in closed-course on-roadcompetition or on closed-course racetracks.High-speed operation should only then beattempted by riders who have beeninstructed in the techniques necessary forhigh-speed riding and are familiar with themotorcycle's characteristics in allconditions.


WarningThe handling characteristics of amotorcycle at high speed may vary fromthose you are familiar with at legal roadspeeds. Do not attempt high-speedoperation unless you have receivedsufficient training and have the requiredskills as a serious accident may result fromincorrect operation.

WarningThe items listed are extremely importantand must never be neglected. A problem,which may not be noticed at normaloperating speeds, may be greatlyexaggerated at high speeds.

63


BrakesCheck that the front and rear brakes arefunctioning properly.

On models equipped with ABS, check thatthe system is functioning by ensuring that theABS indicator light does not remainilluminated at speeds above 6 mph(10 km/h).

TiresHigh-speed operation is hard on tires, andtires that are in good condition are crucial toriding safely. Examine their overall condition,inflate to the correct pressure (when the tiresare cold), and check the wheel balance.Securely fit the valve caps after checking tirepressures. Observe the information given inthe Maintenance and Specification sectionson tire checking and tire safety.

FuelHave sufficient fuel for the increased fuelconsumption that will result from high-speedoperation.

Engine OilMake certain that the engine oil level iscorrect. Ensure that the correct grade andtype of oil is used when topping off.

CoolantCheck that the coolant level is at the upperlevel line in the expansion tank. (Alwayscheck the level with the engine cold.)

Electrical EquipmentMake certain that the headlight, rear/brakelight, turn signals, horn, etc. all work properly.

MiscellaneousVisually check that all fasteners are tight.

CautionIn all countries except Australia,Hong Kong, New Zealand andSouth Africa, the exhaust system for thismodel is fitted with a catalytic converter tohelp reduce exhaust emission levels. Thecatalytic converter can be permanentlydamaged if the motorcycle is allowed torun out of fuel or if the fuel level is allowedto get very low. Always ensure you haveadequate fuel for your journey.

64



65

Accessories and Loading

ACCESSORIES AND LOADINGThe addition of accessories and carrying of additional weight can affect the motorcycle'shandling characteristics causing changes in stability and necessitating a reduction in speed. Thefollowing information has been prepared as a guide to the potential hazards of addingaccessories to a motorcycle and carrying passengers and additional loads.

WarningIncorrect loading may result in an unsaferiding condition leading to an accident.

Always ensure any loads carried are evenlydistributed on both sides of the motorcycle.Ensure that the load is correctly securedsuch that it will not move around while themotorcycle is in motion.

Always check the load security regularly(though not while the motorcycle is inmotion) and ensure that the load does notextend beyond the rear of the motorcycle.

Never exceed the maximum vehicleloading weight of:

• Sprint ST - 473 lbs (215 kg);

• Sprint GT - 473 lbs (215 kg).

This maximum loading weight is made upfrom the combined weight of the rider,passenger, any accessories fitted and anyload carried.

WarningDo not install accessories or carry luggagethat impairs the control of the motorcycle.Make sure that you have not adverselyaffected the visibility of any lightingcomponent, road clearance, bankingcapability (i.e. lean angle), controloperation, wheel travel, ABS where fitted,front fork movement, visibility in anydirection, or any other aspect of themotorcycle's operation.

66


WarningNever ride an accessory equippedmotorcycle, or a motorcycle carrying apayload of any kind, at speeds above80 mph (130 km/h). In either/both ofthese conditions, speeds in excess of80 mph (130 km/h) should not beattempted even where the legal speedlimit permits this.

The presence of accessories and/orpayload will cause changes in the stabilityand handling of the motorcycle.

Failure to allow for changes in motorcyclestability may lead to loss of control or anaccident. Remember that the 80 mph(130 km/h) absolute limit will reduce bythe installation of non-approvedaccessories, incorrect loading, worn tires,overall motorcycle condition and poor roador weather conditions.


WarningOnly operate this Triumph motorcycle athigh speed in closed-course on-roadcompetition or on closed-course racetracks.High-speed operation should only then beattempted by riders who have beeninstructed in the techniques necessary forhigh-speed riding and are familiar with themotorcycle's characteristics in allconditions.


WarningYour passenger should be instructed thathe or she can cause loss of motorcyclecontrol by making sudden movements orby adopting an incorrect seated position.

The rider should instruct the passenger asfollows:

• It is important that the passengersits still while the motorcycle is inmotion and does not interferewith the operation of themotorcycle.

• To keep his or her feet on thepassenger footrests and to firmlyhold onto the seat strap or therider's waist or hips.

• Advise the passenger to lean withthe rider when travelling aroundcorners and not to lean unless therider does so.

67


WarningDo not carry animals on your motorcycle.

An animal could make sudden andunpredictable movements that could leadto loss of motorcycle control and anaccident.

WarningThe handling and braking capabilities of amotorcycle will be affected by the presenceof a passenger. The rider must makeallowances for these changes whenoperating the motorcycle with a passengerand should not attempt such operationunless trained to do so and withoutbecoming familiar and comfortable withthe changes in motorcycle operatingcharacteristics that this brings about.

Motorcycle operation without makingallowances for the presence of a passengercould lead to loss of motorcycle controland an accident.

WarningNever attempt to store any items betweenthe frame and the fuel tank. This canrestrict the steering and will cause loss ofcontrol leading to an accident.

Weight attached to the handlebar or frontfork will increase the mass of the steeringassembly and can result in loss of steeringcontrol leading to an accident.

WarningDo not carry a passenger unless he or sheis tall enough to reach the footrestsprovided.

A passenger who is not tall enough toreach the footrests will be unable to sitsecurely on the motorcycle and may causeinstability leading to loss of control and anaccident.

68


WarningIf the passenger seat or rack (rack onSprint GT models) are used to carry smallobjects, they must not exceed a totalmaximum of 11 lb (5 kg) in weight(combined on the seat and rack on SprintGT models), must not impair control of themotorcycle, must be securely attached andmust not extend beyond the rear or sidesof the motorcycle.

Carrying of objects in excess of 11 lb (5 kg)in weight, that are insecure, impair controlor extend beyond the rear or sides of themotorcycle may lead to loss of motorcyclecontrol and an accident.

Even if small objects are correctly loadedonto the rear seat or rack (on Sprint GTmodels), the maximum speed of themotorcycle must be reduced to 80 mph(130 km/h).

CautionSprint ST only: Do not allow luggage torest on or against the upper portion of therear bodywork.

Allowing luggage to rest on or against theupper portion of the rear bodywork couldclose the air gap between the bodyworkand the exhaust potentially causing thebodywork to become damaged byoverheating.

69

Maintenance and Adjustment

MAINTENANCE AND ADJUSTMENT

Table of ContentsScheduled Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Oil Level Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71Oil and Oil Filter Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73Oil Specification and Grade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Disposal of Used Engine Oil and Oil Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Cooling System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Corrosion Inhibitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75Coolant Level Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Coolant Level Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Coolant Change . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77Radiator and Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Throttle Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Drive Chain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Chain Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81Chain Free-Movement Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Chain Free-Movement Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Chain and Sprocket Wear Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Brake Wear Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84Breaking-in New Brake Pads and Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Brake Pad Wear Compensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85Disc Brake Fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86Brake Fluid Level Inspection and Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87Brake Light Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

70


Steering/Wheel Bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Steering Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90Inspecting the Steering (Steering head) Bearings for Free Play. . . . . . . . . . . . . . . . . . . . . 90Wheel Bearings Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Front Suspension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Front Fork Inspection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Suspension Setting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Front Suspension Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92Spring Pre-Load Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Rear Suspension Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Rebound Damping Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93Spring Pre-Load Adjustment - Sprint ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Tires. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Tire Inflation Pressures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95Tire Wear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Minimum Recommended Tread Depth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96Tire Replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Battery Removal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Battery Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Battery Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Battery Discharge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100Battery Discharge During Storage and Infrequent Use of the Motorcycle . . . . . . . . . . . .101Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101Battery Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Fuse Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Fuse Identification - Sprint ST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103Fuse Identification - Sprint GT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Headlights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Headlight Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Main Beam Horizontal Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Main Beam Vertical Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106Dipped Headlight Vertical Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Dipped Headlight Horizontal Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Dipped Headlight Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

71


Main Beam Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108Position Lamp Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Brake/tail Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Turn Signal Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Front Turn Signal Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110Rear Turn Signal Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

License Plate Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Bulb Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Windshield Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Preparation for Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112Where to be Careful . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113After Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113Seat Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113Unpainted Aluminum Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Cleaning of the Exhaust System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Protecting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

72


Scheduled MaintenanceTo maintain the motorcycle in a safe andreliable condition, the maintenance andadjustments outlined in this section must becarried out as specified in the schedule ofdaily checks, and also in line with thescheduled maintenance chart. Theinformation that follows describes theprocedures to follow when carrying out thedaily checks and some simple maintenanceand adjustment items.

Triumph Motorcycles cannot accept anyresponsibility for damage or injury resultingfrom incorrect maintenance or improperadjustment carried out by the owner.

WarningSpecial tools, knowledge and training arerequired in order to correctly carry out themaintenance items listed in the scheduledmaintenance chart. Only an authorizedTriumph dealer will have this knowledgeand equipment.

Since incorrect or neglected maintenancecan lead to a dangerous riding condition,always have an authorized Triumph dealercarry out the scheduled maintenance ofthis motorcycle.

WarningAll maintenance is vitally important andmust not be neglected. Incorrectmaintenance or adjustment may cause oneor more parts of the motorcycle tomalfunction. A malfunctioning motorcyclemay lead to loss of control and an accident.

Weather, terrain and geographical locationaffects maintenance. The maintenanceschedule should be adjusted to match theparticular environment in which the vehicleis used and the demands of the individualowner.

Since incorrect or neglected maintenancecan lead to a dangerous riding condition,always have an authorized Triumph dealercarry out the scheduled maintenance ofthis motorcycle.

73


Operation Description Odometer Reading in Miles (Kms) or Time Period, whichever comes first

First Service

A Service B Service C Service D Service

Every 500(800)

1 month

6,000(10,000)1 year

12,000(20,000)2 years

18,000(30,000)3 years

24,000(40,000)4 years

Engine and oil cooler - check for leaks Day • • • • •

Engine oil - change - • • • • •

Engine oil filter - change - • • • • •

Valve clearances - check/adjust - • •

Air cleaner - change - • •

Autoscan - carry out a full Autoscan using the Triumph diagnostic tool

- • • •

Engine ECM - check for stored DTCs • •

ABS ECM - check for stored DTCs • • • • •

Spark plugs - check - • •

Spark plugs - change - • •

Throttle bodies - balance - • • • •

Throttle cables - check/adjust Day • • • • •

Cooling system - check for leaks, chafing etc. Day • • • • •

Coolant level - check/adjust Day • • •

Coolant - change - • •

Fuel system - check for leaks, chafing etc. Day • • • • •

Lights, instruments and electrical systems - check Day • • • • •

Steering - check for free operation Day • • • • •

Steering head bearings - check/adjust - • • • • •

Steering head bearings - lubricate - • •

Forks - check for leaks/smooth operation Day • • • • •

Fork oil - change - •

74


Brake fluid levels - check Day • • • • •

Brake fluid - change Every 2 years

Brake pads - check wear levels Day • • • • •

Brake calipers - check for fluid leaks and seized pistons • • • • •

Brake master cylinders - check for fluid leaks • • • • •

Drive chain - lubricate Every 200 miles (300 kms)

Drive chain - wear check Every 500 miles (800 kms)

Drive chain slack - check/adjust Day • • • • •

Drive rubbing strip - check - • • • •

Wheel bearings - check for wear/smooth operation • • • •

Rear wheel bearing - lubricate - • •

Wheels - inspect for damage Day • • • • •

Tire wear/tire damage - check Day • • • • •

Tire pressures - check/adjust Day • • • • •

Clutch cable - check/adjust Day • • • • •

Stand - check operation Day • • • • •

Secondary air injection system - check/clean - • •

Secondary exhaust to header clamp bolt - check/adjust - • • • • •

Fasteners - inspect visually for security Day • • • • •

Accessory rack sliding carriage - check for correct operation • • • • •

Fuel and evaporative loss* hoses - change - •

*Evaporative system fitted to California models only.

Operation Description Odometer Reading in Miles (Kms) or Time Period, whichever comes first

First Service

A Service B Service C Service D Service

Every 500(800)

1 month

6,000(10,000)1 year

12,000(20,000)2 years

18,000(30,000)3 years

24,000(40,000)4 years

75


Engine Oil

In order for the engine, transmission, andclutch to function correctly, maintain theengine oil at the correct level, and change theoil and oil filter in accordance with scheduledmaintenance requirements.

Oil Level Inspection

1. Filler2. Filler plug/Dipstick3. Upper marking

Note:

• An accurate indication of the levelof oil in the engine is only shownwhen the engine oil is at normaloperating temperature, themotorcycle is upright (not on theside stand) and the fillerplug/dipstick has been fullyscrewed home.

WarningMotorcycle operation with insufficient,deteriorated, or contaminated engine oilwill cause accelerated engine wear andmay result in engine or transmissionseizure. Seizure of the engine ortransmission may lead to sudden loss ofcontrol and an accident.

cbnz

ccpu

3

2

1

76


Start the engine and run at idle forapproximately five minutes.

Stop the engine and wait for three minutes toallow the oil to settle.

With the motorcycle upright, remove the fillerplug/dipstick, wipe the blade clean and screwit fully home.

Remove the filler plug/dipstick.

The oil level is indicated by lines on the fillerplug/dipstick. When full, the indicated oillevel must be level with the upper markingon the dipstick.

If the oil level is below the lower marking,add oil a little at a time until the correct levelis reached. Once the correct level is reached,re-install the filler plug/dipstick.

WarningNever start the engine or run the engine ina confined area. Exhaust fumes arepoisonous and can cause loss ofconsciousness and death within a shortperiod of time. Always operate yourmotorcycle in the open-air or in an areawith adequate ventilation.

CautionRunning the engine with insufficient oil willcause engine damage. If the low oilpressure indicator remains on, stop theengine immediately and investigate thecause.

77


Oil and Oil Filter Change

1. Oil drain plug2. Oil filter

The engine oil and filter must be replaced inaccordance with scheduled maintenancerequirements.

Warm up the engine thoroughly, and thenstop the engine and secure the motorcycle inan upright position on level ground.

Place an oil drain pan beneath the engine.

Remove the oil drain plug.

Unscrew and remove the oil filter usingTriumph service tool T3880313. Dispose ofthe old filter in an environmentally friendlyway.

After the oil has completely drained out,install a new sealing washer to the drain plug.Install and tighten the drain plug to18 lbf ft (25 Nm).Apply a thin smear of clean engine oil to thesealing ring of the new oil filter. Install the oilfilter and tighten to 7 lbf ft (10 Nm).Fill the engine to the maximum mark with a10 W/40 or 15 W/50 semi or fully syntheticmotorcycle engine oil that meets specificationAPI SH (or higher) AND JASO MA.

Start the engine and allow it to idle for aminimum of 30 seconds.

WarningProlonged or repeated contact with engineoil can lead to skin dryness, irritation anddermatitis. In addition, used engine oilcontains harmful contamination that canlead to skin cancer. Always wear suitableprotective clothing and avoid skin contactwith used oil.

ccog

1

2

WarningThe oil may be hot to the touch. Avoidcontact with the hot oil by wearing suitableprotective clothing, gloves, eye protection,etc. Contact with hot oil may cause the skinto be scalded or burned.

CautionRaising the engine speed above idle beforethe oil reaches all parts of the engine cancause engine damage or seizure. Onlyraise engine speed after running theengine for 30 seconds to allow the oil tocirculate fully.

78


Ensure that the low oil pressure warning lightextinguishes shortly after starting.

Turn off the ignition, check the oil level usingthe method previously described, and top offto between the minimum and maximumlevel lines on the dipstick.

Oil Specification and GradeTriumph high performance fuel injectedengines are designed to use 10 W/40 or15 W/50 semi or fully synthetic motorcycleengine oil that meets specification API SH (orhigher) AND JASO MA.

Do not add any chemical additives to theengine oil. The engine oil also lubricates theclutch and any additives could cause theclutch to slip.

Do not use mineral, vegetable, non-detergentoil, castor based oils or any oil notconforming to the required specification. Theuse of these oils may cause instant, severeengine damage.

Disposal of Used Engine Oil and Oil FiltersTo protect the environment, do not pour oilon the ground, down sewers or drains, orinto groundwater sources. Do not place usedoil filters in with general waste. If in doubt,contact your local authority.

CautionIf the engine oil pressure is too low, the lowoil pressure warning light will illuminate. Ifthis light stays on when the engine isrunning, stop the engine immediately andinvestigate the cause. Running the enginewith low oil pressure will cause enginedamage.

79


Cooling System

To ensure efficient engine cooling, check thecoolant level each day before riding themotorcycle, and top off the coolant if the levelis low.

Note:

• A year-round, Hybrid Organic AcidTechnology (known as Hybrid OATor HOAT) coolant is installed in thecooling system when themotorcycle leaves the factory. It iscolored green, contains a 50%solution of ethylene glycol basedantifreeze, and has a freezingpoint of -31°F (-35°C).

Corrosion InhibitorsTo protect the cooling system from corrosion,the use of corrosion inhibitor chemicals in thecoolant is essential.

If coolant containing a corrosion inhibitor isnot used, the cooling system will accumulaterust and scale in the water jacket and radiator.This will block the coolant passages, andconsiderably reduce the efficiency of thecooling system.

Note:

• HD4X Hybrid OAT coolant, assupplied by Triumph, is pre-mixedand does not need to be dilutedprior to filling or topping off thecooling system.

WarningHD4X Hybrid OAT coolant containscorrosion inhibitors and anti-freeze suitablefor aluminum engines and radiators.Always use the coolant in accordance withthe instructions of the manufacturer.

Coolant that contains anti-freeze andcorrosion inhibitors contains toxicchemicals that are harmful to the humanbody. Never swallow anti-freeze or any ofthe motorcycle coolant.

80


Coolant Level Inspection

1. Expansion tank2. MAX mark3. MIN mark

Position the motorcycle on level ground andin an upright position. The expansion tank islocated beneath removable panels on the lefthand side of the front fairing.

The coolant level in the expansion tank canbe checked by looking up and through thecenter opening of the front fairing. The levelcan also be checked from above by lookingdown to the left.

Check the coolant level in the expansiontank. The coolant level must be between theMAX and MIN marks. If the coolant is belowthe minimum level, the coolant level must beadjusted.

Coolant Level Adjustment

1. Upper infill panel2. Lower infill panel3. Expansion tank4. Tank cap

Allow the engine to cool.

Remove the two fasteners, release the upperinfill panel bayonet from the grommet andcarefully remove the infill panel.

Remove the fastener and carefully removethe lower (fairing) infill panel to expose theexpansion tank.

ccno

21

3

WarningDo not remove the expansion tank orradiator pressure cap when the engine ishot. When the engine is hot, the coolantinside the radiator will be hot and alsounder pressure. Contact with this hot,pressurized coolant will cause scalds andskin damage.

ccob

1

2

4

3

81


Remove the cap from the expansion tankand add coolant mixture through the filleropening until the level reaches the MAXmark. Re-install the cap.

Note:

• If the coolant level is beingchecked because the coolant hasoverheated, also check the level inthe radiator and top off ifnecessary.

• In an emergency, distilled watercan be added to the coolingsystem. However, the coolantmust then be drained andreplenished with HD4XHybrid OAT coolant as soon aspossible.

Carefully re-install the infill panels, ensuringthe upper infill panel bayonet fastener issecured to the lower infill panel grommet.Tighten the fasteners to 44 lb in (5 Nm).

Coolant ChangeHave the coolant changed by an authorizedTriumph dealer in accordance with scheduledmaintenance requirements.

Radiator and HosesCheck the radiator hoses for cracks ordeterioration, and hose clips for tightness inaccordance with scheduled maintenancerequirements. Have your authorized Triumphdealer replace any defective items.

Check the radiator grille and fins forobstructions by insects, leaves or mud. Cleanoff any obstructions with a stream oflow-pressure water.

CautionIf hard water is used in the cooling system,it will cause scale accumulation in theengine and radiator and considerablyreduce the efficiency of the cooling system.Reduced cooling system efficiency maycause the engine to overheat and suffersevere damage.

WarningThe fan operates automatically when theengine is running. Always keep hands andclothing away from the fan as contact withthe rotating fan can cause injury.

CautionUsing high-pressure water sprays, such asfrom a car wash facility or householdpressure washer, can damage the radiatorfins, cause leaks and impair the radiator'sefficiency.

Do not obstruct or deflect airflow throughthe radiator by installing unauthorizedaccessories, either in front of the radiator orbehind the cooling fan. Interference withthe radiator airflow can cause overheating,potentially resulting in engine damage.

82


Throttle Control

1. Throttle grip2. 0.08 - 0.12 in (2 - 3 mm)

Inspection

Check that the throttle opens smoothly,without undue force and that it closes withoutsticking. Have your authorized Triumphdealer check the throttle system if a problemis detected or any doubt exists.

Check that there is 0.08 - 0.12 in (2 - 3 mm)of throttle grip free play when lightly turningthe throttle grip back and forth.

WarningThe throttle grip controls the throttle valvesin the throttle bodies. If the throttle cablesare incorrectly adjusted, either too tight ortoo loose, the throttle may be difficult tocontrol and performance will be adverselyaffected.

Check the throttle grip free play inaccordance with scheduled maintenancerequirements and make adjustments asnecessary.

ccpf

12

WarningAlways be alert for changes in the 'feel' ofthe throttle and have the throttle systemchecked by an authorized Triumph dealerif any changes are detected. Changes canbe due to wear in the mechanism, whichcould lead to a sticking throttle.

An incorrectly adjusted, sticking or stuckthrottle will lead to loss of motorcyclecontrol and an accident.

WarningUse of the motorcycle with incorrectlyadjusted, incorrectly routed, sticking ordamaged throttle cables will interfere withthe throttle function resulting in loss ofmotorcycle control and an accident.

To avoid incorrect adjustment, incorrectrouting, or continued use of a sticking ordamaged throttle, always have yourthrottle checked and adjusted by yourauthorized Triumph dealer.

83


If there is an incorrect amount of free play,Triumph recommends that you haveadjustments made by your authorizedTriumph dealer. However, in an emergency,throttle adjustment may be made as follows:

1. Opening cable adjuster2. Closing cable adjuster3. Closing cable – free play

measurement point4. Opening cable – free play

measurement point

AdjustmentRemove the seat.

Disconnect the battery, negative (black) leadfirst.

Remove the fuel tank and airbox.

Release the locknut on the 'opening' cableadjuster.

Rotate the 'opening' cable adjuster at thetwist grip end such that it has an equalamount of adjustment in each direction.

Rotate the 'opening' cable adjuster at thethrottle body end of the cable to give0.08 - 0.12 in (2 - 3 mm) of play at the twistgrip. Tighten the locknut.

Make any minor adjustments as necessary togive 0.08 - 0.12 in (2 - 3 mm) of play usingthe adjuster near the twist grip end of thecable. Tighten the locknut.

With the throttle fully closed, ensure thatthere is 0.08 - 0.12 in (2 - 3 mm) of free playin the 'closing' cable at the throttle camattached to the throttle bodies. If necessary,adjust in the same way as the 'opening' cableuntil 0.08 - 0.12 in (2 - 3 mm) of play ispresent.

Re-install the fuel tank and airbox.

Reconnect the battery, positive (red) lead first.

Re-install the seats.

Check that the throttle opens smoothly,without undue force and that it closes withoutsticking.

Ride carefully to your nearest authorizedTriumph dealer and have them check thethrottle system thoroughly before ridingagain.

ccqv

423

1Warning

Ensure that all the adjuster locknuts of allcables are tightened, as a loose locknutcould result in a sticking throttle.

An incorrectly adjusted, sticking or stuckthrottle can lead to loss of motorcyclecontrol and an accident.

84


Clutch

1. Clutch lever2. 0.08 - 0.12 in (2 - 3 mm)

The motorcycle is equipped with acable-operated clutch.

If the clutch lever has excessive free play, theclutch may not disengage fully. This will causedifficulty in shifting gear and selectingneutral. This may cause the engine to stalland make the motorcycle difficult to control.Conversely, if the clutch lever has insufficientfree play the clutch may not engage fully,causing the clutch to slip, which will reduceperformance and cause premature clutchwear.

Clutch lever free play must be checked inaccordance with scheduled maintenancerequirements.

InspectionCheck that there is 0.08 - 0.12 in (2 - 3 mm)clutch lever free play at the lever.

If there is an incorrect amount of free play,adjustments must be made.

AdjustmentLoosen the knurled locknut at the lever endof the clutch cable and turn the adjustersleeve until the correct amount of clutch leverfree play is achieved.

Tighten the knurled locknut against theclutch lever assembly.

If correct adjustment cannot be made usingthe lever adjuster, use the cable adjuster atthe lower end of the cable.

Loosen the adjuster locknut.

Turn the outer cable adjuster to give 0.08 -0.12 in (2 - 3 mm) of free play at the clutchlever.

Tighten the locknut.

ccpe

2

1

85


Drive Chain

For safety and to prevent excessive wear, thedrive chain must be checked, adjusted andlubricated in accordance with scheduledmaintenance requirements. Checking,adjustment and lubrication must be carriedout more frequently for extreme conditionssuch as salty or heavily gritted roads.

If the chain is badly worn or incorrectlyadjusted (either too loose or too tight) thechain could jump off the sprockets or break.Therefore, always replace worn or damagedchains using genuine Triumph parts suppliedby an authorized Triumph dealer.

Chain LubricationLubrication is necessary every 200 miles(300 km) and also after riding in wet weather,on wet roads, or any time that the chainappears dry.

Use the special chain lubricant asrecommended in the Specification section.

Apply lubricant to the sides of the rollers thenallow the motorcycle to stand unused for atleast 8 hours (overnight is ideal). This willallow the oil to penetrate to the chain O-ringsetc.

Before riding, wipe off any excess oil.

If the chain is especially dirty, clean first andthen apply oil as mentioned above.

WarningA loose or worn chain, or a chain thatbreaks or jumps off the sprockets couldcatch on the engine sprocket or lock therear wheel.

A chain that catches on the enginesprocket will injure the rider and lead toloss of motorcycle control and an accident.

Similarly, locking the rear wheel will lead toloss of motorcycle control and an accident.

CautionDo not use a pressure wash to clean thechain as this may cause damage to thechain components.

86


Chain Free-Movement Inspection

1. Maximum movement position

Place the motorcycle on a level surface andhold it in an upright position with no weighton it.

Rotate the rear wheel by pushing themotorcycle to find the position where thechain is tightest, and measure the verticalmovement of the chain midway between thesprockets.

The vertical movement of the drive chainmust be in the range:

Chain Free-Movement Adjustment

1. Adjuster clamp bolt 2. C-spanner3. Eccentric adjuster

Loosen the adjuster clamp bolt.

Using the C-spanner supplied in the tool kit,turn the rear hub/eccentric adjuster(clockwise to loosen, counter-clockwise totighten) until the drive chain is correctlyadjusted.

Tighten the clamp bolt to 40 lbf ft (55 Nm).Repeat the chain adjustment check. Re-adjustif necessary.

Check the rear brake effectiveness.

WarningBefore starting work, ensure themotorcycle is stabilized and adequatelysupported. This will help prevent injury tothe operator or damage to the motorcycle.

Model Specification

Sprint ST 1.00 - 1.38 in (25 - 35 mm)

Sprint GT 1.02 - 1.50 in (26 - 38 mm)

1

ccmv

WarningOperation of the motorcycle with aninsecure rear hub/eccentric adjuster clampbolt may result in impaired stability andhandling of the motorcycle. This impairedstability and handling may lead to loss ofcontrol or an accident.

87


Chain and Sprocket Wear Inspection

1. Measure across 20 links2. Weight

Remove the chain guards.

Stretch the chain taut by hanging a20 - 40 lb (10 - 20 kg) weight on the chain.

Measure the length of 20 links on thestraight part of the chain from pin center ofthe 1st pin to the pin center of the 21st pin.Since the chain may wear unevenly, takemeasurements in several places.

If the length exceeds the maximum servicelimit of 12.63 in (321 mm), the chain must bereplaced.

Rotate the rear wheel and inspect the drivechain for damaged rollers, and loose pins andlinks.

Also inspect the sprockets for unevenly orexcessively worn or damaged teeth.

If there is any irregularity, have the drivechain and/or the sprockets replaced by anauthorized Triumph dealer.

Re-install the chain guards.

WarningIt is dangerous to operate the motorcyclewith defective brakes; you must have yourauthorized Triumph dealer take remedialaction before you attempt to ride themotorcycle again. Failure to take remedialaction may reduce braking efficiencyleading to loss of control or an accident.

ccmw

2

WarningThe use of non-approved chains may resultin a broken chain or may cause the chainto jump off the sprockets.

Use a genuine Triumph supplied chain asspecified in the Triumph parts catalogue.

Never neglect chain maintenance andalways have chains installed by anauthorized Triumph dealer.

88


Brakes

Brake Wear Inspection

1. Brake pads2. Minimum thickness line

Brake pads must be inspected in accordancewith scheduled requirements and replaced ifworn to, or beyond the minimum servicethickness.

If the lining thickness of any pad (front or rearbrakes) is less than 0.06 in (1.5 mm), that is, ifthe pad has worn down to the bottom of thegrooves, replace all the pads on the wheel.

CautionIf the sprockets are found to be worn,always replace the sprockets and drivechain together.

Replacing worn sprockets without alsoreplacing the chain will lead to prematurewear of the new sprockets.

cbmz

1

2

89


Breaking-in New Brake Pads and DiscsAfter replacement brake discs and/or padshave been installed to the motorcycle, werecommend a period of careful breaking-inthat will optimize the performance andlongevity of the discs and pads. Therecommended distance for breaking-in newpads and discs is 200 miles (300 km).

After installing new brake discs and/or padsavoid extreme braking, ride with caution andallow for greater braking distances during thebreaking-in period.

Brake Pad Wear CompensationDisc and brake pad wear is automaticallycompensated for and has no effect on thebrake lever or pedal action. There are noparts that require adjustment on the frontand rear brakes.

WarningBrake pads must always be replaced as awheel set. At the front, where two calipersare installed on the same wheel, replace allthe brake pads in both calipers.

Replacing individual pads will reducebraking efficiency and may cause anaccident.

After replacement brake pads have beeninstalled, ride with extreme caution untilthe new pads have 'broken in'.

WarningIf the brake lever or pedal feels soft when itis applied, or if the lever/pedal travelbecomes excessive, there may be air in thebrake lines and hoses or the brakes maybe defective.

It is dangerous to operate the motorcycleunder such conditions and your authorizedTriumph dealer must rectify the faultbefore riding.

Riding with defective brakes may lead toloss of motorcycle control and an accident.

90


Disc Brake FluidInspect the level of brake fluid in bothreservoirs and change the brake fluid inaccordance with scheduled maintenancerequirements. Use only DOT 4 fluid asrecommended in the Specification section.The brake fluid must also be changed if itbecomes, or is suspected of having becomecontaminated with moisture or any othercontaminants.

Note:

• On models equipped with ABS, aspecial tool is required to bleedthe braking system. Contact yourauthorized Triumph dealer whenthe brake fluid needs changing orthe hydraulic system requiresmaintenance.

WarningBrake fluid is hygroscopic which means itwill absorb moisture from the air.

Any absorbed moisture will greatly reducethe boiling point of the brake fluid causinga reduction in braking efficiency.

Because of this, always replace brake fluidin accordance with scheduled maintenancerequirements.

Always use new brake fluid from a sealedcontainer and never use fluid from anunsealed container or from one which hasbeen previously opened.

Do not mix different brands or grades ofbrake fluid.

Check for fluid leakage around brakefittings, seals and joints and also check thebrake hoses for splits, deterioration anddamage.

Always rectify any faults before riding.

Failure to observe and act upon any ofthese items may cause a dangerous ridingcondition leading to loss of control and anaccident.

WarningIf the ABS is not functioning, the brakesystem will continue to function as astandard non-ABS braking system. In thissituation, braking too hard will cause thewheels to lock resulting in loss of controland an accident.

Reduce speed and do not continue to ridefor longer than is necessary with theindicator light illuminated. Contact anauthorized Triumph dealer as soon aspossible to have the fault checked andrectified.

WarningFailure to observe and act upon any ofthese items may cause a dangerous ridingcondition leading to loss of control and anaccident.

91


Brake Fluid Level Inspection and AdjustmentThe brake fluid level in both reservoirs mustbe kept between the upper and lower levellines (reservoir held horizontal).

Front Brake

1. Front brake fluid reservoir, upper level line

2. Lower level line3. Safety clip

Remove the safety clip.

Remove the reservoir cover.

Fill the reservoir to the upper level line usingnew DOT 4 fluid from a sealed container.

Re-install the reservoir cover ensuring thatthe diaphragm seal is correctly installed.

Re-install the safety clip.

jajc

31

2

WarningIf there has been an appreciable drop inthe level of the fluid in either fluidreservoir, consult your authorized Triumphdealer for advice before riding. Riding withdepleted brake fluid levels, or with a brakefluid leak is dangerous and will causereduced brake performance potentiallyleading to loss of motorcycle control andan accident.

92


Rear Brake - Sprint ST

1. Upper level line2. Lower level line3. Starter solenoid/Main fuse assembly4. Rear brake fluid reservoir

Level InspectionThe rear brake fluid level can be inspectedwithout removing the seat. The reservoir isvisible from the right hand side of themotorcycle, forward of the exhaustintermediate pipe, below the seat.

Level AdjustmentRemove the seat.


The starter solenoid and main fuse areattached to a rubber mounting. Thismounting fits over the rear brake fluidreservoir filler cap.

To gain access to the filler cap, gently pull offthe starter solenoid/main fuse assembly withthe rubber mounting.

Remove the reservoir cap. Fill the reservoir tothe upper level line using new DOT 4 fluidfrom a sealed container.

Re-install the reservoir cap ensuring that thediaphragm seal is correctly installed.

Re-install the starter solenoid/main fuseassembly.


Re-install the seat.

ccns

1

2

4

3

93


Rear Brake - Sprint GT

1. Rear brake fluid reservoir2. Upper level line3. Lower level line

Level Inspection and AdjustmentRemove the seat.

Remove the reservoir cap. Fill the reservoir tothe upper level line using new DOT 4 fluidfrom a sealed container.

Re-install the reservoir cap ensuring that thediaphragm seal is correctly installed.


Brake Light SwitchesThe brake light is activated independently byeither the front or rear brake. If, with theignition in the ON position, the brake lightdoes not work when the front brake lever ispulled or the rear brake pedal is pressed,have your authorized Triumph dealerinvestigate and rectify the fault.

cgbx

1

2

3

WarningRiding the motorcycle with defective brakelights is illegal and dangerous.

An accident causing injury to the rider andother road users may result from use of amotorcycle with defective brake lights.

94


Steering/Wheel Bearings

Steering InspectionLubricate and inspect the condition of thesteering head (steering) bearings inaccordance with scheduled maintenancerequirements.

Note:

• Always inspect the wheel bearingsat the same time as the steeringbearings.

Inspecting the Steering (Steering head) Bearings for Free PlayPosition the motorcycle on level ground, in anupright position.

Raise the front wheel above the ground andsupport the motorcycle.

Standing at the front of the motorcycle, holdthe lower end of the front forks and try tomove them forward and backward.

If any free play can be detected in thesteering (steering head) bearings, ask yourauthorized Triumph dealer to inspect andrectify any faults before riding.

Remove the support and place themotorcycle on the side stand.

WarningTo prevent risk of injury from themotorcycle falling during the inspection,ensure that the motorcycle is stabilized andsecured on a suitable support. Do notexert extreme force against each wheel orrock each wheel vigorously as this maycause the motorcycle to become unstableand cause injury by falling from its support.

Ensure that the position of the supportblock will not cause damage to the sump.

WarningRiding the motorcycle with incorrectlyadjusted or defective steering (steeringhead) bearings is dangerous and maycause loss of motorcycle control and anaccident.

95


Wheel Bearings InspectionIf the wheel bearings in the front or rearwheel allow play in the wheel hub, are noisy,or if the wheel does not turn smoothly, haveyour authorized Triumph dealer inspect thewheel bearings.

The wheel bearings must be inspected at theintervals specified in the scheduledmaintenance chart.

Position the motorcycle on level ground, in anupright position.

Raise the front wheel above the ground andsupport the motorcycle.

Standing at the side of the motorcycle, gentlyrock the top of the front wheel from side toside.

If any free play can be detected, ask yourauthorized Triumph dealer to inspect andrectify any faults before riding.

Reposition the lifting device and repeat theprocedure for the rear wheel.

Remove the support and place themotorcycle on the side stand.

Front Suspension

Front Fork InspectionExamine each fork for any sign of damage,scratching of the slider surface, or for oilleaks.

If any damage or leakage is found, consult anauthorized Triumph dealer.

To check that the forks operate smoothly:

• Position the motorcycle on levelground.

• While holding the handlebars andapplying the front brake, pump theforks up and down several times.

• If roughness or excessive stiffness isdetected, consult your authorizedTriumph dealer.

• The suspension movement will beaffected by adjustment settings.

WarningOperation with worn or damaged front orrear wheel bearings is dangerous and maycause impaired handling and instabilityleading to an accident. If in doubt, have themotorcycle inspected by an authorizedTriumph dealer before riding.

WarningRiding the motorcycle with defective ordamaged suspension is dangerous andmay lead to loss of control and an accident.

WarningNever attempt to dismantle any part of thesuspension units, as all units containpressurized oil. Skin and eye damage canresult from contact with the pressurized oil.

96


Suspension Setting Chart

Note:

• These charts are only a guide.Setting requirements may vary forrider weight and personalpreferences. See the followingpages for instructions on how toadjust your suspension.

Sprint ST

Sprint GT

Front Suspension SettingsThe standard suspension settings provide acomfortable ride and good handlingcharacteristics for general, solo riding. Thechart shows suggested settings for the frontand rear suspension.

The front suspension is adjustable forpre-load only. The spring pre-load adjustersare located at the top of each fork.

Note:

• The setting figures for the frontsuspension are measured as thenumber of adjuster rings visibleabove the fork top cap.

LOADING FRONT REAR

Spring Pre-Load †

Rebound Damping*

Spring Pre-Load ‡

Solo Riding 3 1.5 20

Rider and Passenger or Rider and Luggage

3 1.0 10

Rider, Passenger and Luggage

3 0.5 0

† Adjuster rings visible above fork cap.* Number of adjuster turns in from the fully screwed out (hard) position.‡ Number of clicks out from the fully screwed in position.

LOADING FRONT REAR

Spring Pre-Load †

Rebound Damping*

Spring Pre-Load ‡

Solo Riding 3 1.0 30

Rider and Passenger or Rider and Luggage

3 0.25 20

Rider, Passenger and Luggage

3 0.25 0

† Adjuster rings visible above fork cap.* Number of adjuster turns in from the fully screwed out (hard) position.‡ Number of clicks out from the fully screwed in position.

WarningEnsure that the correct balance betweenfront and rear suspension is maintained.Suspension imbalance could significantlychange handling characteristics leading toloss of control and an accident. Refer to thechart on the previous page for furtherinformation or consult your dealer.

WarningEnsure that the adjusters are set to thesame setting on both forks. Settings whichvary from left to right could significantlychange handling characteristics leading toloss of control and an accident.

97


Spring Pre-Load Adjustment

1. Spring pre-load adjusterTo change the spring pre-load, rotate theadjuster clockwise to increase pre-load, orcounter-clockwise to decrease pre-load.Always set the pre-load adjusters such thatthere are an equal number of graduationlines visible on both forks.

Note:

• The motorcycle is delivered fromthe factory with the springpre-load set to three adjuster ringsvisible above the fork top cap.

Rear Suspension AdjustmentThe rear suspension unit is adjustable forrebound damping and spring pre-load.

Rebound Damping Adjustment

1. Rebound damping adjusterThe rebound damping adjuster is located atthe bottom of the rear suspension unit on theleft hand side of the motorcycle.

To adjust the rebound damping setting,rotate the adjuster clockwise to increaserebound damping and counter-clockwise todecrease.

Note:

• The setting is measured as thenumber of adjuster turns in fromthe fully screwed out (hard)position.

• The motorcycle is delivered fromthe factory with the reboundadjuster set to 1.5 turns in fromthe fully screwed out (hard)position.

ccpd

1

1

ceyq

98


Spring Pre-Load Adjustment - Sprint ST

1. Spring pre-load adjusterThe spring pre-load adjuster is situated onthe left hand side of the motorcycle, at thetop of the rear suspension unit.

To adjust the spring pre-load setting rotatethe slotted adjuster clockwise to increase, orcounter-clockwise to decrease.

Note:

• The setting is measured as thenumber of adjuster 'clicks' outfrom the fully screwed in position.

• The motorcycle is delivered fromthe factory with the springpre-load set to 20 'clicks' out fromthe fully screwed in position.

Spring Pre-Load Adjustment - Sprint GT

1. Spring pre-load adjusterThe spring pre-load adjuster is situated onthe right hand side of the motorcycle, abovethe swinging arm.

To adjust the spring pre-load setting rotatethe slotted adjuster clockwise to increase, orcounter-clockwise to decrease.

Note:

• The setting is measured as thenumber of adjuster turns out fromthe fully screwed in position.

• The motorcycle is delivered fromthe factory with the springpre-load set to 30 'clicks' out fromthe fully screwed in position.

ccnt

1

cgdq

1

99


Tires

Typical Tire Marking

This motorcycle is equipped with tubelesstires, valves and wheel rims. Use only tiresmarked 'TUBELESS' and tubeless valves onrims marked 'SUITABLE FOR TUBELESSTIRES'.

Tire Inflation PressuresCorrect inflation pressure will providemaximum stability, rider comfort and tire life.Always check tire pressures before ridingwhen the tires are cold. Check tire pressuresdaily and adjust if necessary. See theSpecification section for details of the correctinflation pressures.

Wheel Marking

cboa

ccom_1

WarningIncorrect tire inflation will cause abnormaltread wear and instability problems thatmay lead to loss of control and an accident.

Under-inflation may result in the tireslipping on, or coming off the rim.Over-inflation will cause instability andaccelerated tread wear.

Both conditions are dangerous as they maycause loss of control leading to an accident.

SUITABLE FORTUBELESS

TYRES

100


Tire WearAs the tire tread wears down, the tirebecomes more susceptible to punctures andfailure. It is estimated that 90% of all tireproblems occur during the last 10% of treadlife (90% worn). It is therefore notrecommended to use tires until they are wornto their minimum.

Minimum Recommended Tread DepthIn accordance with the periodic maintenancechart, measure the depth of the tread with adepth gauge, and replace any tire that hasworn to, or beyond the minimum allowabletread depth specified in the table below:

Under 130 km/h (80 mph)

0.08 in (2 mm)

Over 130 km/h (80 mph)

Rear 0.12 in (3 mm)Front 0.08 in (2 mm)


WarningOnly operate this Triumph motorcycle athigh speed in closed-course on-roadcompetition or on closed-course racetracks.High-speed operation should only then beattempted by riders who have beeninstructed in the techniques necessary forhigh-speed riding and are familiar with themotorcycle's characteristics in allconditions. High-speed operation in anyother circumstances is dangerous and willlead to loss of motorcycle control and anaccident.

WarningOperation with excessively worn tires ishazardous and will adversely affecttraction, stability and handling which maylead to loss of control and an accident.

When tubeless tires become punctured,leakage is often very slow. Always inspecttires very closely for punctures. Check thetires for cuts, embedded nails or othersharp objects. Operation with punctured ordamaged tires will adversely affectmotorcycle stability and handling whichmay lead to loss of control or an accident.

Check the rims for dents or deformation.Operation with damaged or defectivewheels or tires is dangerous and loss ofmotorcycle control or an accident couldresult.

Always consult your authorized Triumphdealer for tire replacement, or for a safetyinspection of the tires.

101


Tire ReplacementAll Triumph motorcycles are carefully andextensively tested in a range of ridingconditions to ensure that the most effectivetire combinations are approved for use oneach model. It is essential that approved tires,mounted in approved combinations, are usedwhen purchasing replacement tires. The useof non-approved tires, or approved tires innon-approved combinations, may lead tomotorcycle instability and an accident. Onmodels equipped with ABS, different wheelspeeds, caused by mounting non-approvedtires can affect the function of the ABScomputer.

See the Specification section for details ofapproved tire combinations. Always have tiresmounted and balanced by your authorizedTriumph dealer who has the necessarytraining and skills to ensure safe, effectivemounting.

WarningOn models equipped with ABS, the ABScomputer operates by comparing therelative speed of the front and rear wheels.Use of non-recommended tires can affectwheel speed and cause the ABS functionnot to operate, potentially leading to loss ofcontrol and an accident in conditionswhere the ABS would normally function.

WarningIf a tire sustains a puncture, the tire mustbe replaced. Failure to replace a puncturedtire, or operation with a repaired tire canlead to instability, loss of control or anaccident.

WarningDo not install tube-type tires on tubelessrims. The bead will not seat and the tirescould slip on the rims, causing rapid tiredeflation that may result in a loss of vehiclecontrol and an accident. Never install aninner tube inside a tubeless tire. This willcause friction inside the tire and theresulting heat build-up may cause the tubeto burst resulting in rapid tire deflation, lossof vehicle control and an accident.

WarningIf tire damage is suspected, such as afterstriking the curb, ask your authorizedTriumph dealer to inspect the tire bothinternally and externally. Remember, tiredamage may not always be visible fromthe outside. Operation of the motorcyclewith damaged tires could lead to loss ofcontrol and an accident.

102


WarningWhen replacement tires are required,consult your authorized Triumph dealerwho will arrange for the tires to beselected, in a correct combination, from theapproved list and mounted according tothe tire manufacturer's instructions.

When tires are replaced, allow time for thetires to seat to the rim (approximately24 hours). During this seating period, ridecautiously as an incorrectly seated tirecould cause loss of control or an accident.

Initially, the new tires will not produce thesame handling characteristics as the worntires and the rider must allow adequateriding distance (approximately 100 miles)to become accustomed to the newhandling characteristics.

24 hours after mounting, the tire pressuresmust be checked and adjusted, and thetires examined for correct seating.Rectification must be carried out asnecessary.

The same checks and adjustments mustalso be carried out when 100 miles havebeen travelled after mounting.

WarningUse of a motorcycle with incorrectly seatedtires, incorrectly adjusted tire pressures, orwhen not accustomed to its handlingcharacteristics may lead to loss of controland an accident.

WarningTires that have been used on a rolling roaddynamometer may become damaged. Insome cases, the damage may not be visibleon the external surface of the tire. Tiresmust be replaced after such use ascontinued use of a damaged tire may leadto instability, loss of control and anaccident.

WarningAccurate wheel balance is necessary forsafe, stable handling of the motorcycle. Donot remove or change any wheel balanceweights. Incorrect wheel balance maycause instability leading to loss of controland an accident.

When wheel balancing is required, such asafter tire replacement, see your authorizedTriumph dealer.

Only use self-adhesive weights. Clip-onweights may damage the wheel and tireresulting in tire deflation, loss of controland an accident.

103


Battery Battery Removal

Sprint ST

1. Battery2. Battery Strap3. Negative (black) terminal4. Positive (red) terminal

Sprint GT

1. Battery2. Battery strap3. Negative (black) terminal4. Positive (red) terminal

WarningUnder some circumstances, the battery cangive off explosive gases; keep sparks,flames and cigarettes away. Provideadequate ventilation when charging orusing the battery in an enclosed space.

The battery contains sulfuric acid (batteryacid). Contact with skin or eyes may causesevere burns. Wear protective clothing anda face shield.

If battery acid gets on your skin, flush withwater immediately.

If battery acid gets in your eyes, flush withwater for at least 15 minutes and SEEKMEDICAL ATTENTION IMMEDIATELY.

If battery acid is swallowed, drink largequantities of water and SEEK MEDICALATTENTION IMMEDIATELY.

KEEP BATTERY ACID OUT OF THEREACH OF CHILDREN.

WarningThe battery contains harmful materials.Always keep children away from thebattery whether or not it is installed in themotorcycle.

Do not attach jump leads to the battery,touch the battery cables together orreverse the polarity of the cables as any ofthese actions may cause a spark whichwould ignite battery gases causing a risk ofpersonal injury.

ccnq

1

342

41

2

cgdr

3

104


Remove the seat.

Remove the battery strap.

Disconnect the battery leads, negative (black)lead first.

Take the battery out of the case.

Battery DisposalShould the battery ever require replacement,the original battery must be handed to arecycling agent who will ensure that thedangerous substances from which the batteryis manufactured do not pollute theenvironment.

Battery MaintenanceClean the battery using a clean, dry cloth. Besure that the cable connections are clean.

The battery is a sealed type and does notrequire any maintenance other than checkingthe Voltage and routine recharging whenrequired, such as during storage.

It is not possible to adjust the battery acidlevel in the battery; the sealing strip must notbe removed.

Battery Discharge

WarningEnsure that the battery terminals do nottouch the motorcycle frame as this maycause a short circuit or spark, which wouldignite battery gases causing a risk ofpersonal injury.

WarningThe battery acid is corrosive and poisonousand will cause damage to unprotectedskin. Never swallow battery acid or allow itto come into contact with the skin. Toprevent injury, always wear eye and skinprotection when handling the battery.

CautionThe charge level in the battery must bemaintained to maximize battery life.

Failure to maintain the battery charge levelcould cause serious internal damage to thebattery.

105


Under normal conditions, the motorcyclecharging system will keep the battery fullycharged. However, if the motorcycle isunused, the battery will gradually dischargedue to a normal process called self discharge;the clock, engine control module (ECM)memory, high ambient temperatures, or theaddition of electrical security systems or otherelectrical accessories will all increase this rateof battery discharge. Disconnecting thebattery from the motorcycle during storagewill reduce the rate of discharge.

Battery Discharge During Storage and Infrequent Use of the MotorcycleDuring storage or infrequent use of themotorcycle, inspect the battery Voltageweekly using a digital multimeter. Follow themanufacturer's instructions supplied with themeter.

Should the battery Voltage fall below12.7 Volts, the battery should be charged(see page 105).

Allowing a battery to discharge or leaving itdischarged for even a short period of timecauses sulphation of the lead plates.Sulphation is a normal part of the chemicalreaction inside the battery, however over timethe sulfate can crystallize on the platesmaking recovery difficult or impossible. Thispermanent damage is not covered by themotorcycle warranty, as it is not due to amanufacturing defect.

Keeping the battery fully charged reduces thelikelihood of it freezing in cold conditions.Allowing a battery to freeze will cause seriousinternal damage to the battery.

Battery ChargingFor help with selecting a battery charger,checking the battery Voltage or batterycharging, contact your local authorizedTriumph dealer.

Should the battery Voltage fall below12.7 Volts, the battery should be chargedusing a Triumph approved battery charger.Always remove the battery from themotorcycle and follow the instructionssupplied with the battery charger.

WarningThe battery gives off explosive gases; keepsparks, flames and cigarettes away. Provideadequate ventilation when charging orusing the battery in an enclosed space.

The battery contains sulfuric acid (batteryacid). Contact with skin or eyes may causesevere burns. Wear protective clothing anda face shield.

If battery acid gets on your skin, flush withwater immediately.

If battery acid gets in your eyes, flush withwater for at least 15 minutes and SEEKMEDICAL ATTENTION IMMEDIATELY.

If battery acid is swallowed, drink largequantities of water and SEEK MEDICALATTENTION IMMEDIATELY.

KEEP BATTERY ACID OUT OF THEREACH OF CHILDREN.

CautionDo not use an automotive quick charger asit may overcharge and damage the battery.

106


For extended periods of storage (beyond twoweeks) the battery should be removed fromthe motorcycle and kept charged using aTriumph approved maintenance charger.

Similarly, should the battery charge fall to alevel where it will not start the motorcycle,remove the battery from the motorcyclebefore charging.

Battery Installation

Place the battery in the battery case.


Apply a light coat of grease to the terminalsto prevent corrosion.

Cover the positive terminal with theprotective cap.

Re-install the battery strap.


Fuse Box

Sprint ST

1. Fuse boxThe fuse box is located beneath a removablepanel on the right hand side of the frontfairing.

To allow access to the fuse box, insert theignition key and remove the panel.

WarningEnsure that the battery terminals do nottouch the motorcycle frame as this maycause a short circuit or spark, which wouldignite battery gases causing a risk ofpersonal injury.

ccnp

1

107


Sprint GT

1. Left fuse box2. Right fuse boxThe fuse boxes are located beneath the seat.Remove the seat to access the fuse boxes.

Fuse Identification - Sprint STThe fuses can be identified by a numbermoulded into the fusebox housing, adjacentto each fuse, as shown below. These numberscorrespond to the numbers given in the tablebelow. Fuses without an identificationnumber are spare, and should be replaced ifused.

A blown fuse is indicated when all of thesystems protected by that fuse becomeinoperative. When checking for a blown fuse,use the table below to establish which fusehas blown.

WarningAlways replace blown fuses with new onesof the correct rating (as specified on thefuse box cover) and never use a fuse ofhigher rating. Use of an incorrect fusecould lead to an electrical problem,resulting in motorcycle damage, loss ofmotorcycle control and an accident.

1

cgdr

2

Circuit Protected Position Rating (Amps)

Starter solenoid, dip and main beam headlights

1 20

Ignition switch main feed, tail lights, number plate light, side lights, fuel pump

2 10

Turn signals, brake light, horn

3 10

Not used 4

Not used 5

Accessory socket, heated grips

6 10

Cooling fan 7 15

Engine management system

8 10

Alarm, diagnostic connector, instruments

9 10

GPS 10 2

108


Fuse Identification

Note:

• The starter solenoid has anadditional 30 Amp fuse, attacheddirectly to the solenoid, beneaththe rider's seat.

Fuse Identification - Sprint GTThe fuse identification numbers listed in thetables correspond with those printed on thefuse box cover, as shown. Spare fuses arelocated at right angles to the main fuses andshould be replaced if used.

A blown fuse is indicated when all of thesystems protected by that fuse becomeinoperative. When checking for a blown fuse,use the table below to establish which fusehas blown.

22020

10102010 102015

1 2 3 4 5

6 7 8 9 10 11

1020

101 2

20

Fusebox Number 1


Dip and main beam headlights, starter relay

1 20

Engine management 2 20

Cooling fan 3 15

Fuel pump 4 10

Alarm, instruments, ECM 5 10

Not used 6

Fusebox Number 2


ABS only 1 20

ABS only 2 20

Heated grips, accessory socket, top box

3

Horn, turn signals, alarm 4 10

Alarm, diagnostic connector, instruments

5 10

Turn signals, brake light, horn

6 20

109


1. Fuse box number 1 (left hand)2. Fuse box cover3. Fuse box number 2 (right hand)4. Fuse box cover5. Spare fuses

Note:

• The starter solenoid has anadditional 30 Amp fuse, attacheddirectly to the solenoid, beneaththe rider's seat.

Headlights

20

10

10

15

1010

20

20

EMPTY6

OPEN

15A5

10A4

15A3

20A2

20A1

1 2

5

20

20

10

10

1010

20

20

20A6

OPEN

10A5

10A4

2A3

20A2

20A1

3 4

5

cebw

ABSABSGPS

WarningAdjust road speed to suit the visibility andweather conditions in which the motorcycleis being operated.

Ensure that the beams are adjusted toilluminate the road surface sufficiently farahead without blinding oncoming traffic.An incorrectly adjusted headlight mayimpair visibility causing an accident.

WarningNever attempt to adjust a headlight beamwhen the motorcycle is in motion.

Any attempt to adjust a headlight beamwhen the motorcycle is in motion mayresult in loss of control and an accident.

CautionIf the motorcycle is to be used underclosed-course conditions, you may beasked to tape the visible outer surface ofthe headlight.

When taped, the headlight will overheatand distort the outer surface. Therefore, toavoid headlight distortion, alwaysdisconnect the headlights when they aretaped for use under closed-courseconditions.

110


Headlight AdjustmentEach headlight can be adjusted by means ofvertical and horizontal adjustment screwslocated on the top and rear of each headlight.

1. Horizontal adjustment screw (LH dipped headlight)

2. Vertical adjustment screw (LH dipped headlight)

3. Horizontal adjustment screw (main beam)

4. Vertical adjustment screw (main beam)

5. Vertical adjustment screw (RH dipped headlight)

6. Horizontal adjustment screw (RH dipped headlight)

Note:

• The illustration shows a view ofthe rear of the lighting assembly.

• When turning the adjustmentscrews, clockwise andcounter-clockwise directions are asviewed from the rear of thelighting assembly.

Main Beam Horizontal AdjustmentThe main beam horizontal adjustment screwis accessible without removing any panels. Itcan be reached from below the lights.

Switch the main beam on.

Turn the adjustment screw clockwise to movethe beam to the left or counter-clockwise tomove the beam to the right.

Switch the headlights off when the beamsetting is satisfactory.

Main Beam Vertical Adjustment

1. Windshield2. Cover panel3. Adjustment screw access

Remove the screws securing the windshieldto the cockpit. Slide the windshield upwardsand to the rear to remove it.

Remove the screws securing the cover paneland remove the panel.

The adjustment screw is now accessible.

Switch the main beam on.

U

U

U

L

L

R

R

D

D

D

L

R

ccoy

1

2

3

4 5

6

ccpj

1

3

2

111


Turn the vertical adjustment screw clockwiseto raise the beam or counter-clockwise tolower the beam.

Switch the headlights off when the beamsetting is satisfactory.

Re-install the cover panel and windshield.

Dimmed Headlight Vertical AdjustmentThe dimmed headlight vertical adjustmentscrews are accessible without removing anypanels. They can be reached from below thelights on the left or right hand side. Turn thehandlebars for ease of access.

Switch the headlight beam on.

Turn the vertical adjustment screwscounter-clockwise to raise the beams orclockwise to lower the beams.

Switch the headlights off when the beamsettings are satisfactory.

Dimmed Headlight Horizontal Adjustment

1. Left hand filler panel2. Coolant expansion tank cover3. Left hand headlight adjustment screw

Remove the left and right hand filler panels.

Remove the coolant expansion tank andstowage/fuse box cover panels. It is notnecessary to remove the stowage box liner orthe fuse box.

Switch the headlight dipped beam on.

The adjustment screws are now accessible.

On the right hand headlight, turn thehorizontal adjustment screw clockwise tomove the beam to the right, orcounter-clockwise to move the beam to theleft.

On the left hand headlight, turn thehorizontal adjustment screwcounter-clockwise to move the beam to theright, or clockwise to move the beam to theleft.

Switch the headlights off when the beamsettings are satisfactory.

ccpi

1

2

3

112


Re-install the cover and filler panels.

Dipped Headlight Bulb ReplacementIt is not necessary to remove the dippedheadlight when bulb replacement becomesnecessary. The left and right filler panels,coolant expansion tank and stowage/fusebox cover panels do have to be removed.

1. Headlight2. Rubber cover3. Multi-pin electrical connection4. Bulb retainer

To replace a dipped headlight bulb:

Remove the seat.


Remove the relevant filler and cover panels.

Remove the rubber cover and disconnect themulti-pin electrical connector from the bulbto be replaced.

Detach the wire bulb retainer from the clip. Itis not necessary to undo the screw.

Remove the bulb from the headlight unit.

Installation is the reverse of the removalprocedure.

Main Beam Bulb ReplacementIt is necessary to remove the cockpit and thecomplete headlight unit when bulbreplacement becomes necessary.

1. Headlight unit2. Side fastener3. Center fastener

To replace a main beam bulb:

Remove the seat.


Remove the cockpit.

Unscrew the nuts securing the headlight unitto the support bracket and release the unit.

Remove the rubber cover and disconnect themulti-pin electrical connector from the bulbto be replaced.

Detach the wire bulb retainer from the clip. Itis not necessary to undo the screw.

Remove the bulb from the headlight unit.

cgdv

2

1

4 3

ccpn

1

2

3

113



Position Lamp Bulb ReplacementThe position lamps are installed within theheadlight aperture.

Carefully remove the rubber bulb holderfrom the back of the position lamp anddetach the bulb.


Brake/tail LightThe brake/tail light unit is a sealed,maintenance free LED unit.

WarningThe bulbs become hot during use. Alwaysallow sufficient time for the bulbs to coolbefore handling. Avoid touching the glasspart of the bulb. If the glass is touched orgets dirty, clean with alcohol before re-use.

CautionEnsure that the bulb holder is correctlyinstalled to prevent water ingress.

WarningWhen reconnecting the battery, connectthe positive (red) lead first.

WarningDo not reconnect the battery until theassembly process has been completed.Premature battery reconnection couldresult in ignition of the battery gasescausing risk of injury.

WarningRiding the motorcycle with defective brakelights is illegal and dangerous. In the eventof failure of the LED unit, consult yourauthorized Triumph dealer.

An accident causing injury to the rider andother road users may result from use of amotorcycle with defective brake lights.

114


Turn Signal Lights

Front Turn Signal Bulb Replacement

1. Mirror glass2. Securing screws3. Bulb holder

Release the screws on the underside of themirror shell and remove the mirror glass togain access to the bulb holder.

Carefully remove the rubber bulb holder anddetach the bulb.


Rear Turn Signal Bulb Replacement

1. Turn signal lens2. Lens screw

The lens on each turn signal light is held inplace by a screw located in the body of thelight.

Release the screws and remove the lens togain access to the bulb for replacement.


CautionSupport the mirror glass in case it falls outwhen releasing the screws.

ccnz

12

3

ccoa

1

2

115


License Plate Light

Bulb ReplacementCarefully remove the rubber bulb holderfrom the back of the license plate light unitand remove the bulb.


Windshield Cleaning

Clean the windshield with a solution of mildsoap or detergent and lukewarm water. Aftercleaning, rinse well and then dry with a soft,lint free cloth.

If the transparency of the windshield isreduced by scratches or oxidation whichcannot be removed, the windshield must bereplaced.

CautionTo avoid cable damage, do not pull thebulb holder using the cables.

CautionEnsure that the bulb holder is correctlyinstalled to prevent water ingress.

CautionProducts such as window cleaning fluids,insect remover, rain repellent, scouringcompounds, gasoline or strong solventssuch as alcohol, acetone, carbontetrachloride, etc. will damage thewindshield. Never allow these products tocontact the windshield.

116


CleaningFrequent, regular cleaning is an essential partof the maintenance of your motorcycle. Ifregularly cleaned, the appearance will bepreserved for many years. Cleaning with coldwater containing an automotive cleaner isessential at all times but particularly so afterexposure to sea breezes, sea water, dusty ormuddy roads and in winter when roads aretreated for ice and snow. Do not usehousehold detergent, as the use of suchproducts will lead to premature corrosion.Although, under the terms of yourmotorcycle warranty, cover is providedagainst the corrosion of certain items, theowner is expected to observe this reasonableadvice which will safeguard against corrosionand enhance the appearance of themotorcycle.

Preparation for WashingBefore washing, precautions must be takento keep water off the following places:Rear opening of the exhausts: Cover with aplastic bag secured with rubber bands.Clutch and brake levers, switch housings onthe handlebar: Cover with plastic bags.Ignition switch and steering lock: Cover thekeyhole with tape.Remove any items of jewelry such as rings,watches, zips or belt buckles, which mayscratch or otherwise damage painted orpolished surfaces.Use separate cleaning sponges or cleaningcloths for washing painted/polished surfacesand chassis areas. Chassis areas (such aswheels and under fenders) will be exposed tomore abrasive road grime and dust, whichmay then scratch painted or polishedsurfaces, if the same sponge or cleaningcloths are used.

WarningNever attempt to clean the windshieldwhile the motorcycle is in motion asreleasing the handlebars may cause loss ofvehicle control and an accident.

Operation of the motorcycle with adamaged or scratched windshield willreduce the rider's forward vision. Any suchreduction in forward vision is dangerousand may lead to an accident causing injuryor death.

CautionCorrosive chemicals such as battery acidwill damage the windshield. Never allowcorrosive chemicals to contact thewindshield.

117


Where to be CarefulAvoid spraying water with any great forcenear the following places:

• Instruments;

• Brake cylinders and brake calipers;

• Under the fuel tank;

• Drive chain;

• Steering head bearings;

• Wheel bearings and suspensionlinkage bearings.

Note:

• Use of soaps that contain highlevels of alkaline will leave aresidue on painted surfaces, andmay also cause water spotting.Always use a low alkaline soap toaid the cleaning process.

After WashingRemove the plastic bags and tape, and clearthe air intakes.

Lubricate the pivots, bolts and nuts.

Test the brakes before motorcycle operation.

Start the engine and run it for 5 minutes.Ensure adequate ventilation for the exhaustfumes.

Use a dry cloth to absorb water residue. Donot allow water to stand on the machine asthis will lead to corrosion.

Seat Care

To help maintain its appearance, clean theseat using a sponge or cleaning cloth withsoap and water.

CautionDo not spray any water at all under thecockpit area. The engine’s air intake ductsare located in this area, and any watersprayed in this area could enter the airboxand engine, causing damage to both items.

CautionUse of high-pressure spray washers is notrecommended. When using pressurewashers, water may be forced intobearings and other components causingpremature wear from corrosion and loss oflubrication.

WarningNever wax or lubricate the brake discs.Loss of braking power and an accidentcould result. Clean the disc with aproprietary brand of oil-free brake disccleaner.

CautionUse of chemicals or high-pressure spraywashers is not recommended for cleaningthe seat. When using chemicals or pressurewashers the seat cover may get damaged.

118


Unpainted Aluminum ItemsItems such as brake and clutch levers mustbe correctly cleaned to preserve theirappearance.

Use a proprietary brand of aluminum cleanerwhich does not contain abrasive or causticelements.

Clean aluminum items regularly, in particularafter use in inclement weather, where thecomponents must be hand washed and driedeach time the machine is used.

Warranty claims due to inadequatemaintenance will not be allowed.

Cleaning of the Exhaust SystemAll parts of the exhaust system of yourmotorcycle must be cleaned regularly toavoid a deterioration of its appearance. Theseinstructions can be applied to chrome,brushed stainless steel and carbon fibercomponents alike.

Note:

• The exhaust system must be coolbefore washing to prevent waterspotting.

WashingPrepare a mixture of cold water and mildautomotive cleaner. Do not use a highlyalkaline soap as commonly found atcommercial car washes because it leaves aresidue.

Wash the exhaust system with a soft cloth. Donot use an abrasive scouring pad or steelwool. They will damage the finish.

Rinse the exhaust system thoroughly.

Ensure no soap or water enters the exhausts.

DryingDry the exhaust system as far as possible witha soft cloth. Do not run the engine to dry thesystem or spotting will occur.

ProtectingWhen the exhaust system is dry, rub'Motorex 645 Clean and Protect' into thesurface.

It is recommended that regular protection beapplied to the system as this will both protectand enhance the system's appearance.

CautionThe use of products containing silicone willcause discolouration of the chrome andmust not be used. Similarly, the use ofabrasive cleaners and polishes will damagethe system and must not be used.

119

Storage

STORAGE

Preparation for StorageClean the entire vehicle thoroughly.

Fill the fuel tank with the correct grade ofunleaded fuel and add a fuel stabilizer (ifavailable), following the fuel stabilizermanufacturer's instructions.

Remove the spark plug from each cylinderand put several drops (0.16 fl oz (5 ml)) ofengine oil into each cylinder. Cover the sparkplug holes with a piece of cloth or rag. Withthe engine stop switch in the RUN position,push the starter button for a few seconds tocoat the cylinder walls with oil. Install thespark plugs, tightening to 9 lbf ft (12 Nm).Change the engine oil and filter (seepage 77).

Check and if necessary correct the tirepressures (see page 124).

Set the motorcycle on a box or stand so thatboth wheels are raised off the ground. (If thiscannot be done, put boards under the frontand rear wheels to keep dampness awayfrom the tires.)

Spray rust inhibiting oil (there are a host ofproducts on the market and your dealer willbe able to offer you local advice) on allunpainted metal surfaces to prevent rusting.Prevent oil from getting on rubber parts,brake discs or in the brake calipers.

Lubricate and if necessary adjust the drivechain (see page 85).

Make sure the cooling system is filled with a50% mixture of anti-freeze and distilledwater solution (see page 122).

Remove the battery, and store it where it willnot be exposed to direct sunlight, moisture,or freezing temperatures. During storage itshould be given a slow charge (one ampereor less) about once every two weeks(see page 104).

Store the motorcycle in a cool, dry area, awayfrom sunlight, and with a minimum dailytemperature variation.

Put a suitable porous cover over themotorcycle to keep dust and dirt fromcollecting on it. Avoid using plastic or similarnon-breathable, coated materials that restrictair flow and allow heat and moisture toaccumulate.

WarningGasoline is extremely flammable and canbe explosive under certain conditions. Turnthe ignition switch off. Do not smoke.Make sure the area is well ventilated andfree from any source of flame or sparks;this includes any appliance with a pilotlight.

120

Storage

Preparation after StorageInstall the battery (if removed) (seepage 106).

If the motorcycle has been stored for morethan four months, change the engine oil (seepage 77).

Check all the points listed in the Daily SafetyChecks section.

Before starting the engine, remove the sparkplugs from each cylinder.

Put the side stand down.

Crank the engine on the starter motor severaltimes until the oil pressure light goes out.

Replace the spark plugs, tightening to9 lbf ft (12 Nm), and start the engine.

Check and if necessary correct the tirepressures (see page 124).

Check the brakes for correct operation.

Test ride the motorcycle at low speeds.

Specifications

121

SPECIFICATIONS

Sprint ST Sprint GT

Dimensions

Overall Length 83.2 in (2,114 mm) 88.9 in (2,260 mm)

Overall Width 29.3 in (745 mm) 37 in (940 mm)

Overall Height: 47.8 in (1,215 mm) 47.6 in (1,210 mm)

Wheelbase 57.4 in (1,457 mm) 61.6 (1,565 mm)

Seat Height 32.3 in (820 mm) 32.1 in (815 mm)

Weights

Wet Weight 531 lbs (241 kg) 590 lbs (268 kg)

Maximum Payload 473 lbs (215 kg) 473 lbs (215 kg)

Engine

Type In-line 3 cyl. In-line 3 cyl.

Displacement 64 cu in (1050 cc) 64 cu in (1050 cc)

Bore x Stroke 3.11 - 2.81 in (79 x 71.4 mm)

3.11 -2.81 in (79 x 71.4 mm)

Compression Ratio 12.0:1 12.0:1

Cylinder Numbering Left to Right Left to Right

Cylinder Sequence Number 1 at left 1 at left

Firing Order 1-2-3 1-2-3

Starting System Electric Starter Electric Starter

Specifications

122

* DIN 70020

Sprint ST Sprint GT

Performance

Maximum Power* 123 bhp (125 PS ) at 9,100 rpm

128.2 bhp (129.9 PS) at 9,200 rpm

Maximum Torque 76 ft.lbf (103 Nm) at 7,500 rpm

80 ft.lbf (108 Nm) at 6,300 rpm

Lubrication

Type Forced Lubrication (Wet sump)

Forced Lubrication (Wet sump)

Cooling

Coolant Type Triumph HD4X Hybrid OAT coolant

Triumph HD4X Hybrid OAT coolant

Water/Anti-freeze ratio 50/50 (pre-mixed as supplied by Triumph)

50/50 (pre-mixed as supplied by Triumph)

Coolant Capacity 0.60 US gal (2.3 liters) 0.60 US gal (2.3 liters)

Thermostat Opens (nominal) 185 - 188°F (85 - 88°C) 185 - 188°F (85 - 88°C)

Fuel System

Type Electronic Fuel Injection Electronic Fuel Injection

Injectors Twin Jet Solenoid Operated Plate Valve

Twin Jet Solenoid Operated Plate Valve

Fuel Pump Submerged Electric Submerged Electric

Fuel Pressure 43.5 psi (3.0 bar) nominal 43.5 psi (3.0 bar) nominal

Fuel

Type 89 (R+M)/2 89 (R+M)/2

Steel Fuel Tank Capacity 5.28 US gal (20 liters) 5.28 US gal (20 liters)

Specifications

123

Sprint ST Sprint GT

Ignition

Ignition System Digital Inductive Digital Inductive

Electronic Rev Limiter (r/min) 9,500 (r/min) 9,500 (r/min)

Spark Plug NGK CR9EK NGK CR9EK

Spark Plug Gap 0.027 in (0.7 mm) 0.027 in (0.7 mm)

Gap Tolerance +0.001/-0.003 min (+0.05/-0.1 mm)

+0.001/-0.003 min (+0.05/-0.1 mm)

Transmission

Transmission Type 6 Speed, Constant Mesh 6 Speed, Constant Mesh

Clutch Type Wet, Multi-Plate Wet, Multi-Plate

Final Drive Chain DID X-Ring Endless, 106 Link

DID X-Ring Endless, 116 Link

Primary Drive Ratio 1.750 (105/60) 1.750 (105/60)

Gear Ratios:

Final Drive Ratio 2.211 (19/42) 2.211 (19/42)

1st 2.733 (15/41) 2.733 (15/41)

2nd 1.947 (19/37) 1.947 (19/37)

3rd 1.545 (22/34) 1.545 (22/34)

4th 1.292 (24/31) 1.292 (24/31)

5th 1.154 (26/30) 1.154 (26/30)

6th 1.074 (27/29) 1:1 (28/28)

Specifications

124

Sprint ST Sprint GT

Tires

Tire Pressures (Cold):

Front 36 psi (2.5 bar) 36 psi (2.5 bar)

Rear 42 psi (2.9 bar) 42 psi (2.9 bar)

Approved tires/sizes:

Option 1

Front Bridgestone BT021 (FBZ) 120/70ZR17

Bridgestone BT021 (FBZ) 120/70ZR17

Rear Bridgestone BT021180/55ZR17

Bridgestone BT021180/55ZR17

Option 2

Front Pirelli Angel ST 120/70ZR17 (A Specification)

Pirelli Angel ST 120/70ZR17 (A Specification)

Rear Pirelli Angel ST180/55ZR17 (E Specification)

Pirelli Angel ST180/55ZR17 (E Specification)

Option 3

Front Dunlop Sportmax Roadsmart 120/70ZR17

Dunlop Sportmax Roadsmart 120/70ZR17

Rear Dunlop Sportmax Roadsmart 180/55ZR17

Dunlop Sportmax Roadsmart 180/55ZR17

Option 4

Front Bridgestone BT020120/70ZR17

Michelin Pilot Road II120/70ZR17 (D Specification)

Rear Bridgestone BT020 U180/55ZR17

Michelin Pilot Road II180/55ZR17 (B Specification)

Specifications

125

WarningUse the recommended tires ONLY in the combinations given. Do not mix tires from differentmanufacturers or mix different specification tires from the same manufacturer as this mayresult in loss of motorcycle control and an accident.

Specifications

126

Sprint ST Sprint GT

Electrical Equipment

Battery 12 Volt, 10 Ah 12 Volt, 12 Ah

Alternator 12 Volt, 35 Amp 12 Volt, 35 Amp

Headlight 3 x 12 Volt, 55 watt H7 halogen

3 x 12 Volt, 55 watt H7 halogen

Tail/Brake Light LED LED

Turn Signal Lights 12 Volt, 10 watt 12 Volt, 10 watt

Frame

Rake 24° 23.5°

Trail 3.54 in (90 mm) 3.30 in (84 mm)

Tightening Torques

Oil Filter 7 lbf ft (10 Nm) 7 lbf ft (10 Nm)

Oil Drain Plug 18 lbf ft (25 Nm) 18 lbf ft (25 Nm)

Spark Plug 9 lbf ft (12 Nm) 9 lbf ft (12 Nm)

Rear Wheel Eccentric Clamp Bolt 40.5 lbf ft (55 Nm) 40.5 lbf ft (55 Nm)

Specifications

127

Sprint ST Sprint GT

Fluids and Lubricants

Engine Oil Semi or fully synthetic 10 W/40 or 15 W/50 motorcycle engine oil which meets specification API SH (or higher) and JASO MA

Semi or fully synthetic 10 W/40 or 15 W/50 motorcycle engine oil which meets specification API SH (or higher) and JASO MA

Brake and Clutch Fluid Mobil Universal Brake and Clutch FluidDOT 4

Mobil Universal Brake and Clutch FluidDOT 4

Coolant Triumph HD4X Hybrid OAT coolant (pre-mixed)

Triumph HD4X Hybrid OAT coolant (pre-mixed)

Bearings and Pivots Mobil Grease HP 222 Mobil Grease HP 222

Drive Chain Mobil Chain Spray or Mobilube HD 80

Mobil Chain Spray or Mobilube HD 80

Specifications

128


129

Index

INDEX

BBattery . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Charging . . . . . . . . . . . . . . . . . . . . . 105Disposal . . . . . . . . . . . . . . . . . . . . . . 104Installation . . . . . . . . . . . . . . . . . . . . 106Maintenance . . . . . . . . . . . . . . . . . . 104Removal . . . . . . . . . . . . . . . . . . . . . . 103

Brakes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88Brake and Clutch Lever Adjusters . . 33Brake Pad Wear Compensation . . . . 89Brake Wear Inspection . . . . . . . . . . . 88Disc Brake Fluid . . . . . . . . . . . . . . . . . 90Fluid Level . . . . . . . . . . . . . . . . . . . . . . 91Light Switches . . . . . . . . . . . . . . . . . . 93

CCleaning . . . . . . . . . . . . . . . . . . . . . . . . . . 116

After Washing . . . . . . . . . . . . . . . . . . 117Drying . . . . . . . . . . . . . . . . . . . . . . . . 118Exhaust System . . . . . . . . . . . . . . . . . 118Preparation. . . . . . . . . . . . . . . . . . . . . 116Protecting. . . . . . . . . . . . . . . . . . . . . . 118Unpainted Aluminum Items . . . . . . . 118Washing. . . . . . . . . . . . . . . . . . . . . . . 118Where to be Careful . . . . . . . . . . . . . 117

Clock/Trip Computer . . . . . . . . . . . . . . . . 25Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Adjustment . . . . . . . . . . . . . . . . . . . . 84Inspection. . . . . . . . . . . . . . . . . . . . . . 84

Cooling System. . . . . . . . . . . . . . . . . 79, 122Coolant Change . . . . . . . . . . . . . . . . . 81Coolant Level Inspection . . . . . . . . . . 80Corrosion Inhibitors . . . . . . . . . . . . . . 79Level Adjustment. . . . . . . . . . . . . . . . 80Radiator Hoses. . . . . . . . . . . . . . . . . . . 81Temperature Gauge . . . . . . . . . . . . . 27

DDimensions . . . . . . . . . . . . . . . . . . . . . . . 121Drive Chain . . . . . . . . . . . . . . . . . . . . . . . . 85

Chain Lubrication. . . . . . . . . . . . . . . . 85Movement Adjustment . . . . . . . . . . . 86Movement Inspection . . . . . . . . . . . . 86Wear Inspection . . . . . . . . . . . . . . . . . 87

EElectrical Equipment . . . . . . . . . . . . . . . . 126Engine

Serial Number . . . . . . . . . . . . . . . . . . 19Specifications . . . . . . . . . . . . . . . . . . 121To Start the Engine . . . . . . . . . . . . . . 54To Stop the Engine . . . . . . . . . . . . . . 54

Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . 75Disposal of Used Oil and Filters . . . . 78Oil Level Inspection . . . . . . . . . . . . . . 75Specification and Grade. . . . . . . . . . . 78

FFluids and Lubricants . . . . . . . . . . . . . . . 127Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . 126Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Fuel Gauge . . . . . . . . . . . . . . . . . . . . . . . . 28Fuel Requirement . . . . . . . . . . . . . . . . . . . 36

Filling the Fuel Tank. . . . . . . . . . . . . . 38Fuel Grade . . . . . . . . . . . . . . . . . . . . . 36Fuel Tank Cap . . . . . . . . . . . . . . . . . . 38

Fuel System . . . . . . . . . . . . . . . . . . . . . . . 122Fuse Box . . . . . . . . . . . . . . . . . . . . . . . . . 106

Fuse Identification - Sprint GT . . . . . 108Fuse Identification - Sprint ST . . . . . 107

GGears

Shifting Gears. . . . . . . . . . . . . . . . . . . 56

130

Index

HHeadlights . . . . . . . . . . . . . . . . . . . . . . . . 109

Adjustment . . . . . . . . . . . . . . . . . . . . 110Dimmed Headlight Adjustment . . . . 111Dimmed Headlight Bulb Replacement . . . . . . . . . . . . . . . . . . . 112Main Beam Headlight Adjustment . . 110Main Beam Headlight Bulb Replacement . . . . . . . . . . . . . . . . . . . 112Position Lamp Bulb Replacement . . . 113

IIgnition . . . . . . . . . . . . . . . . . . . . . . . . . . 123

Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Switch/Steering Lock . . . . . . . . . . . . . 32

Instrument Panel Layout . . . . . . . . . . . . . 23

LLeft Handlebar Switches

Horn Button. . . . . . . . . . . . . . . . . . . . 36Pass Button . . . . . . . . . . . . . . . . . . . . 36Turn Signal Switch. . . . . . . . . . . . . . . 36

Licence Plate Light . . . . . . . . . . . . . . . . . . 115Lubrication . . . . . . . . . . . . . . . . . . . . . . . 122

OOdometer/Trip Meter . . . . . . . . . . . . . . . 24

PPannier System - Sprint GT . . . . . . . . . . . 44Parts Identification

Sprint GT . . . . . . . . . . . . . . . . . . . . . . . 16Sprint ST . . . . . . . . . . . . . . . . . . . . . . . 14

Performance . . . . . . . . . . . . . . . . . . . . . . 122

RRear Light . . . . . . . . . . . . . . . . . . . . . . . . . 113Right Handlebar Switches . . . . . . . . . . . . 34

Engine Stop Switch . . . . . . . . . . . . . . 34Starter Button. . . . . . . . . . . . . . . . . . . 35

SSafety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Fuel and Exhaust Fumes . . . . . . . . . . . 5Handlebars and Footrests . . . . . . . . . . 9Helmet and Clothing . . . . . . . . . . . . . . 8Maintenance/Equipment . . . . . . . . . . 10Motorcycle . . . . . . . . . . . . . . . . . . . . . . 5Parking . . . . . . . . . . . . . . . . . . . . . . . . . 9Parts and Accessories . . . . . . . . . . . . . 10Riding . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Seat Care . . . . . . . . . . . . . . . . . . . . . . . . . 117Speedometer. . . . . . . . . . . . . . . . . . . . . . . 24Storage . . . . . . . . . . . . . . . . . . . . . . . . . . 119

Preparation after Storage . . . . . . . . . 120Preparation for Storage . . . . . . . . . . 119

TTachometer . . . . . . . . . . . . . . . . . . . . . . . . 24Tightening Torques. . . . . . . . . . . . . . . . . 126Tires . . . . . . . . . . . . . . . . . . . . . . . . . . 99, 124

Minimum Recommended Tread Depth . . . . . . . . . . . . . . . . . . . 100Tire Inflation Pressures. . . . . . . . . . . . 99Tire Replacement . . . . . . . . . . . . . . . 101Tire Wear . . . . . . . . . . . . . . . . . . . . . 100

Transmission . . . . . . . . . . . . . . . . . . . . . . 123

VVehicle Identification Number . . . . . . . . . 19

WWarnings

Warning Label Locations . . . . . . . . . . 12Warning Labels . . . . . . . . . . . . . . . . . . 2Warning Lights. . . . . . . . . . . . . . . . . . 29Warnings, Cautions and Notes . . . . . . 1

Weights . . . . . . . . . . . . . . . . . . . . . . . . . . 121Windshield Cleaning. . . . . . . . . . . . . . . . 115

nd2 na3 ohb usen - triumphassets1.triumphmotorcycles.com/files/content/en-us/... · motorcycle...

Documents