netclear. delivering reliability.ortronics new clarity maximum density patch panels offer 48 ports...

Take a lookat yournetwork’snewest device.

Why add security cameras to your network?

Reduced costs, increased reliability, easier installation and maintenance and

a better overall security system. That’s why you need NetClear® Electronic

Safety and Security (ESS) from Berk-Tek and Ortronics: proven copper and

fiber structured cabling systems, engineered to support any network device.

NetClear.DeliveringReliability.

It simply works better.

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 14

http://www.berktek.comhttp://www.ortronics.com

SECTION 2ORTRONICS & BERK-TEK/NETCLEAR

FEATURED PRODUCTS

2

Berk-Tek

LANmark™-10G2 Small Diameter Augmented Category 6

Berk-Tek offers their new LANmark-10G2 Augmented Category 6 cable, featuring the smallest round outside diameter of .300" nominal. The uniquegeometry and pair configuration in this cable creates a significantly reducedround cable diameter, while preserving the industry leading alien crosstalkperformance of the original LANmark-10G. This cable provides significantspace savings in horizontal and vertical pathways and simplifies installationover other 10G cables on the market. This cable is designed and guaranteedto meet the electrical component requirements of proposed TIA-568-B.2-10standard for Augmented Category 6 supporting IEEE 10GBASE-T out to 100 meters.

Improved LANmark™-1000 Enhanced Category 6

Berk-Tek announced performance improvements in their LANmark-1000enhanced Category 6 cable, due to a redesign and enhanced manufacturingtechniques. Through this redesign, the LANmark-1000 has increased allcrosstalk parameters by 4 dB over the old design, which was already exceeding component performance as specified by TIA/EIA-568-B.2-1Category 6. Included in a cross-the-board crosstalk performance is an 85%improvement in the PS-ACR, which means much more signal integrity andstrength, which greatly reduces vulnerability to noise interference.

Micro Data Center Plenum (MDP) Fiber Optic Cables

Designed specifically for data centers and storage area networks, Berk-Tekdelivers best-in-class micro-cabling technology with new and innovative MDP(patent pending) cable design, the perfect balance of performance and cablesize. The new MDP cable design incorporates Berk-Tek’s patented dry loose-tube technology in a smaller O.D. and is adapted specifically for theindoor-only DC/SAN and building backbone environment. The new patent-pending construction provides a 50% smaller cross sectional area thanequivalent fiber count indoor cables. In DC/SAN applications, the new MDPcables can help prevent cabinet and pathway congestion, considerablyenhancing airflow, and facilitating more efficient cooling. Available withplenum ratings up to 72 fibers, these cables are also offered with aluminumor steel interlocking armor, as well as pre-terminated cable assemblies withmulti-fiber MTP/MPO connectors or single-fiber type connectors such as SC,ST, or LC.

Ortronics®

Clarity® 10G Six-Port Module Patch Panel

Clarity 10G patch panels are now available in the traditional multi-portadapter format. Utilizing an innovative method of circuit isolation, the Clarity10G patch panels support the alien crosstalk requirements of IEEE 10G andTIA Augmented Category 6 cabling specifications without requiring the use ofindividual jacks for panel termination.The new product family will be available in flat or angled versions, with 24 or48 ports. Clarity 10G multi-port adapter panels support preferred panel termination practices with mechanical accommodations for easier lacing ofthe larger insulated conductors of 10 Gig cables, providing a labor-savingalternative to the individual jack panel.

Clarity Maximum Density Patch Panels

Ortronics new Clarity maximum density patch panels offer 48 ports of Clarity6 or 5E performance in 1 rack unit, offering an ideal solution for ultra highdensity applications. Like all Ortronics Clarity patch panels, the new maximum density patch panels are ETL tested and verified to TIA Category 6and 5e component specifications. They are precision tuned with Clarity patchcords using Ortronics center tuned technology for significantly improved cross talk and return loss performance that is field measurable in the link or channel.

Momentum 2

Ortronics next generation modular pre-terminatedfiber optic cabling solutionsMomentum 2 is the next generation of the popular Momentum modular, pre-terminatedfiber optic cabling system. Momentum 2 combines state-of-the-art optical ribboncabling, industry-leading MTP® termination,advanced LC polishing and innovative hardware to create a cost-effective solution that provides a simple, quick, and high performing cassette-based fiber optic structuredcabling system.

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 1

http://www.ortronics.comhttp://www.berktek.com

2-2

SOLUTIONNetClear® GT UTP Copper

www.ortronics.comwww.berktek.com

www.accu-tech.com

2

Ortronics Clarity5e® Category 5e Components

TRACJACK® MODULAR JACKSPART No. DESCRIPTIONOR-TJ5E00 Clarity5e TracJack®, 180° Exit OR-TJ5E45 Clarity5e TracJack, 45° Exit

Standard color is fog white. TracJacks are available in these colors: -00 = black, -13 = electrical ivory, -22 = lt. red, -23 = lt. orange, -24 = lt. yellow, -25 = lt. green, -26 = lt. blue, -27 = lt. purple, -36 = dark blue, -42 = red, -43 = orange, -44 = yellow, -45 = green, -68 = Wiremold lt. grey, -78 = Wiremold grey, -88 = cloud white, -99 = Wiremold ivory. TJ5E45 and TJ645 are not available in colors 22-27.

SERIES II® MODULAR JACKSPART No. DESCRIPTIONOR-S215E00 Clarity5e Series II®, 180° Exit, 1 PortOR-S225E00 Clarity5e Series II, 180° Exit, 2 Ports

PATCH CORDS4 Pair Clarity5e, Blue

PART No. LENGTHOR-MC5E03-06 3 ftOR-MC5E05-06 5 ftOR-MC5E07-06 7 ftOR-M5E609-06 9 ftOR-MC5E15-06 15 ftOR-MC5E20-06 20 ftOR-MC5E25-06 25 ft

To order other patch cord colors: -03 = red, -04 = yellow, -05 = green, -08 = grey, -09 = white

PATCH PANELSPART No. DESCRIPTIONOR-PSD5E6U12 12 Port, Clarity5e Standard Density Panel,

T568A/B, 1.75" x 19" (1RU) OR-PHA5EU24 24 Port Angled Clarity5e Panel, T568A/B,

1.75" x 19" (1RU)OR-PHA5EU48 48 Port Angled Clarity5e Panel, T568A/B,

3.5" x 19" (2RU)OR-PHD5E6U24 24 Port Clarity5e Panel (Flat), T568A/B,



7.0" x19" (4RU)

CLARITY® 110 BLOCKSPART No. DESCRIPTIONOR-110ABC5E100 100 Pair Footprint, (24 4 Pair Clips) Clarity6

110 Blocks With LegsOR-110ABC5E300 300 Pair Footprint, (72 4 Pair Clips) Clarity6

110 Blocks With Legs

BERK-TEK LANMARK-350™, 4 PAIR, ENHANCED CATEGORY 5E UTP CABLECMP PART No. CMR PART No. DESCRIPTION10032065 10032426 Blue10032060 10032419 Yellow10032072 10032434 White10032079 10032447 Grey

The NetClear GT horizontal cabling system gives you a Category 5e solution that provides a comfortable margin of additional performance. All components are exceptionally well matched to worktogether—surpassing all Category 5e requirements. You get full channel performance, without compromise. The NetClear GT Enhanced Category 5e solution provides a total usable bandwidth of

155 MHz. The NetClear GT horizontal channel solution is engineered to surpass Category 5e application requirements. NetClear GT guarantees installed static channel performance 6 dB better than allCategory 5e crosstalk requirements for standards compliant designs/installations with field verification by NetClear approved handheld channel testers.

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 2

http://www.ortronics.comhttp://www.berktek.comhttp://www.accu-tech.com

Ortronics Clarity5E FTP Category 5e ComponentsPATCH PANEL KITPART No. DESCRIPTIONOR-PHDTJS24 24 Port Panel for Shielded TracJacksOR-TJS5E00 TracJack®, Shielded, Category 5e, 180° Exit,

T568/B

PATCH CORDS4 Pair Clarity®, FTP, Light Grey

PART No. LENGTHOR-MCS5E03-08 3 ftOR-MCS5E05-08 5 ftOR-MCS5E07-08 7 ftOR-MCS5E09-08 9 ftOR-MCS5E15-08 15 ft

BERK-TEK LANMARK™-5E FTP, 4 PAIR SHIELDED CATEGORY 5E CABLE CMP PART No. CMR PART No. DESCRIPTION10032121 10043494 Grey10047419 10047420 White10034841 10051227 Blue10053566 10063684 Red10061862 10068822 Black

Ortronics WorkstationTRACJACK® FACEPLATES, SINGLE GANG PLASTICORTRONICS PART No. DESCRIPTIONOR-40300549 Holds One TracJackOR-40300548 Holds Two TracJacksOR-40300547 Holds Three TracJacksOR-40300546 Holds Four TracJacksOR-40300545 Holds Six TracJacks

TRACJACK FACEPLATES, DUAL GANG PLASTICORTRONICS PART No. DESCRIPTIONOR-40300555 Holds Six TracJacksOR-40300554 Holds Eight TracJacksOR-40300620 Holds Twelve TracJacks

TRACJACK SURFACE MOUNT INTERFACE BOXESORTRONICS PART No. DESCRIPTIONOR-40400054 Holds Two TracJacks, 2.42" x 2.18" x 1.16"OR-40400055 Holds Four TracJacks, 4.78" x 3.6" x 1.14"OR-40400056 Holds Six TracJacks, 6.96" x 3.6" x 1.14"

SERIES II® FACEPLATES, SINGLE GANG ORTRONICS PART No. DESCRIPTIONOR-40300158 Low Profile, Fog White, 2.75" x 4.5" x .5"OR-40300011 Standard Profile, Fog White, 2.75" x 4.5" x .75"

SERIES II FACEPLATES, DUAL GANG ORTRONICS PART No. DESCRIPTIONOR-40300159 Standard Profile, Fog White, 4.5" x 4.5" x .75"OR-40300175 High Profile, Fog White, 4.5" x 4.5" x 1.65"

SERIES II SURFACE MOUNT INTERFACE BOXESORTRONICS PART No. DESCRIPTIONOR-40400050 Holds One 1-unit Module, Fog WhiteOR-40400049 Holds Two 1-unit Modules, Fog WhiteOR-40400040 Holds Three 1-unit Modules. Internal Fiber

Storage Ring, Fog WhiteOR-40400031 Holds Four 1-unit Modules, Fog White

2-3


www.accu-tech.com

2

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 3


2-4


www.accu-tech.com

2 SOLUTIONNetClear® GT2 UTP Copper

Ortronics Clarity6® Category 6 Components

TRACJACK® MODULAR JACKSPART No. DESCRIPTIONOR-TJ600 Clarity6 TracJack®, 180° Exit OR-TJ645 Clarity6 TracJack, 45° Exit


SERIES II® MODULAR JACKSPART No. DESCRIPTIONOR-S21600 Clarity6 Series II®, 180° Exit, 1 PortOR-S22600 Clarity6 Series II, 180° Exit, 2 Ports

PATCH CORDS4 Pair Clarity6®, Blue

PART No. LENGTHOR-MC603-06 3 ftOR-MC605-06 5 ftOR-MC607-06 7 ftOR-MC609-06 9 ftOR-MC615-06 15 ftOR-MC620-06 20 ftOR-MC625-06 25 ft


PATCH PANELSPART No. DESCRIPTIONOR-PSD66U12 12 Port, Clarity6 Standard Density Panel, T568A/B,

1.75" x 19" (1RU) OR-PHA66U24 24 Port Angled Clarity6 Panel, T568A/B,

1.75" x 19" (1RU)OR-PHA66U48 48 Port Angled Clarity6 Panel, T568A/B,

3.5" x 19" (2RU)OR-PHD66U24 24 Port Clarity6 Panel (Flat), T568A/B,



7.0" x 19" (4RU)

CLARITY® 110 BLOCKSPART No. DESCRIPTIONOR-110ABC6050 50 Pair Footprint, (12 4 Pair Clips) Clarity6

110 Blocks With LegsOR-110ABC6100 100 Pair Footprint, (24 4 Pair Clips) Clarity6



BERK-TEK LANMARK™-1000, 4 PAIR, ENHANCED CATEGORY 6 UTP CABLECMP PART No. CMR PART No. DESCRIPTION10032094 10032455 Blue10032090 10032461 Yellow10032092 10032459 White10032026 10032452 Grey

The NetClear GT2 horizontal cabling system gives you a cabling solution that provides a comfortable margin of additional performance over Category 6 requirements. All components are exceptionallymatched to work optimally together—surpassing all Category 6 channel requirements. You get full channel performance, without compromise. The NetClear GT2 Enhanced Category 6 solution provides atotal usable bandwidth of 250 MHz. The NetClear GT2 horizontal channel solution is engineered to surpass all requirements of Category 6 applications. NetClear GT2 is guaranteed to deliver lab verified

channel performance of 5 dB better than all Category 6 crosstalk and return loss requirements for standards compliant installations.

2-4


www.accu-tech.com

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 4


2-5


www.accu-tech.com

2

Ortronics® Clarity6® Category 6 Components

TRACJACK® MODULAR JACKSPART No. DESCRIPTIONOR-TJ600 Clarity6 TracJack®, 180° Exit OR-TJ645 Clarity6 TracJack, 45° Exit


SERIES II® MODULAR JACKSPART No. DESCRIPTIONOR-S21600 Clarity6 Series II®, 180° Exit, 1 PortOR-S22600 Clarity6 Series II, 180° Exit, 2 Ports

PATCH CORDS4 Pair Clarity6, Blue

PART No. LENGTHOR-MC603-06 3 ft OR-MC605-06 5 ftOR-MC607-06 7 ftOR-MC609-06 9 ftOR-MC615-06 15 ftOR-MC620-06 20 ftOR-MC625-06 25 ft


PATCH PANELSPART No. DESCRIPTIONOR-PSD66U12 12 Port, Clarity6 Standard Density Panel, T568A/B,

1.75" x 19" (1RU) OR-PHA66U24 24 Port Angled Clarity6 Panel, T568A/B,

1.75" x 19" (1RU)OR-PHA66U48 48 Port Angled Clarity6 Panel, T568A/B,




7.0" x 19" (4RU)

CLARITY® 110 BLOCKSPART No. DESCRIPTIONOR-110ABC6050 50 Pair Footprint, (12 4 Pair Clips) Clarity6




BERK-TEK LANMARK™-2000, 4 PAIR, PREMIUM UTP CATEGORY 6 CABLECMP PART No. CMR PART No. DESCRIPTION10064547 10065418 Blue10064549 10065421 Yellow10064548 10065419 White10065417 10065420 Grey

The NetClear GT3 horizontal cabling system gives you a cabling solution that provides an unsurpassed margin of additional performance over Category 6 requirements. All components are exceptionallyengineered—exceeding all Category 6 channel requirements. You get premium performance, without compromise. The NetClear GT3 Premium Category 6 solution provides a total usable

bandwidth beyond 400 MHz. The NetClear GT3 horizontal channel solution is engineered to significantly surpass all requirements of Category 6 applications and provide maximum headroom over Category 6 performance.

SOLUTIONNetClear® GT3 UTP Copper

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 5


2-6


www.accu-tech.com

2

Ortronics® Clarity® 10G UTP Components

MODULAR JACKSTracJacks®, Clarity 10G, 180° Exit

PART No. COLOROR-TJ610 Fog WhiteOR-TJ610-00 BlackOR-TJ610-36 BlueOR-TJ610-42 RedOR-TJ610-43 OrangeOR-TJ610-44 YellowOR-TJ610-45 GreenOR-TJ610-68 Wiremold® GreyOR-TJ610-99 Wiremold® Ivory

PATCH CORDS4 Pair Clarity, 10G, White

PART No. LENGTHOR-MC61003-09 3 ftOR-MC61005-09 5 ftOR-MC61007-09 7 ftOR-MC61009-09 9 ftOR-MC61015-09 15 ftOR-MC61020-09 20 ftOR-MC61025-09 25 ft

PATCH PANELSPART No. DESCRIPTIONOR-PHA610U24 24 Port Angled Clarity 10G Panel, T568A/B,

1.75" x 19" (1RU)OR-PHA610U48 48 Port Angled Clarity 10G Panel, T568A/B,

3.5" x 19" (2RU)OR-PHD610U24 24 Port Clarity 10G Panel (Flat), T568A/B,

1.75" x 19" (1RU)OR-PHD610U48 48 Port Clarity 10G Panel (Flat), T568A/B,

3.5" x 19" (2RU)OR-PHDTJA24 24 Port TracJack Patch Panel, 19", 1U, With

Isolation For 10G (Unloaded)

BERK-TEK LANMARK-10G2, 4 PAIR, AUGMENTED CATEGORY 6 UTP CABLECMP PART No. CMR PART No. DESCRIPTION10130484 10137703 White10137384 10137700 Blue10137385 10137706 Yellow10137183 10137701 Grey

SOLUTIONNetClear® GTX 10G UTP Copper

Achieving full channel performance at 10 Gb/s over UTP is no simple matter. It calls for the right cable paired with the right connectors and patch cords. Or else the resultant system may be full ofcaveats and apologies instead of the blazing performance 10GBASE-T is clearly intended to deliver. With Berk-Tek’s small diameter 10G2 co-engineered with Ortronics’ 10G connectivity and supportcomponents, we simply got 10 Gb/s performance right. We meet IEEE and TIA standards, including specifications for alien crosstalk, with room to spare. As a result, NetClear GTX delivers real-world

performance from end-to-end without compromises. Full channel performance at 10 Gb/s over UTP can be simple. Just specify NetClear GTX.

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 6


2-7


www.accu-tech.com

2

Ortronics® Clarity6® FTP Category 6 Components

PATCH PANEL KITPART No. DESCRIPTIONOR-PHDTJS24 24 Port Panel for Shielded TracJacksOR-TJS600 TracJack®, Shielded, 180° Exit, T568/B

PATCH CORDS4 Pair Clarity, FTP, Light Grey

PART No. LENGTHOR-MCS603-08 3 ftOR-MCS605-08 5 ftOR-MCS607-08 7 ftOR-MCS609-08 9 ftOR-MCS615-08 15 ft

BERK-TEK LANMARK™-6 FTP, 4 PAIR, CATEGORY 6 SHIELDED CABLE CMP PART No. CMR PART No. DESCRIPTION10057903 10070439 Grey10063671 10074211 Red10063672 10074212 Black10062608 10090687 Yellow

SOLUTIONNetClear® GTS 10G FTP Copper

With NetClear structured cabling, going to 10 Gb/s doesn’t mean compromise. The NetClear GTS system was the first system to offer full IEEE standards compliance and guaranteed 10-Gb/s support. It’s the first system to comply fully with the IEEE 802.3an standard's signal-to-noise ratio for 10GBASE-T. NetClear GTS is high performance without limits and alien crosstalk specifications, for 10GBASE-T.

NetClear GTS is high performance without limits.

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 7


2-8

SOLUTIONNetClear® MM1 Optical Fiber


www.accu-tech.com

2

NetClear MM1 fiber-optic solutions feature GIGAlite™ multimode fiber, guaranteed to support Gigabit Ethernet to industry-leading distances, and Ortronics connectivity for industry leading insertion-lossperformance. They are engineered for high speed performance in data centers/storage area networks (DC/SAN), horizontal, backbone, and campus fiber optic structured cabling systems.

Ortronics OptiMo® Optical Fiber Products

FC SERIES RACK-MOUNT PATCH CABINETS, BLACKADAPTER PANEL

PART No. CAPACITY HEIGHT TRAY OPERATIONOR-FC01U-P 3 1U Front/Rear SlidingOR-FC02U-P 6 2U Front/Rear SlidingOR-FC03U-P 9 3U Front/Rear SlidingOR-FC04U-P 12 4U Front/Rear Sliding

SURFACE-MOUNT CABINETS, BEIGEPART No. ADAPTER PANEL CASSETTE CAPACITYOR-615SMFC-12P 2OR-615SMFC-24P 4OR-615SMFC-48P 8

ADAPTER PANELS, BEIGE, PHOSPHOR BRONZE SLEEVEPART No. FIBER COUNT STYLEOR-OFP-SCD06MB 6 SC, DuplexOR-OFP-SCD12MB 12 SC, DuplexOR-OFP-LCD12MB 12 LC, DuplexOR-OFP-STS06NB 6 ST, Simplex

FIB-OR-COP II WORKSTATION OUTLETSPART No. DESCRIPTIONOR-62100041 TracJack Fib-Or-Cop IIOR-62100040 Series II Fib-Or-Cop II

PATCH CORDS, DUPLEX, 1 METER LENGTHPART No. DESCRIPTION FIBEROR-61150D62001M99C SC to SC 62.5/125OR-61150D62001M77C LC to LC 62.5/125OR-61150D62001M33C ST to ST 62.5/125OR-61150D50001M99C SC to SC 50/125OR-61150D50001M77C LC to LC 50/125OR-61150D50001M33C ST to ST 50/125

ORTRONICS® FIELD-INSTALLABLE CONNECTORSNo epoxy/no polish zirconia ferrule, for tight buffered cable (25 per pack)

PART No. DESCRIPTION FIBER205KAS9FB-50T SC 50/125205KAS9GB-50T LC 50/125OR-854A00000-1 Field Installation Kit Pre-polished

ANAEROBIC TERMINATION, ZIRCONIA FERRULE IDEAL FOR ADVENTUM CABLE(25 PER PACK)PART No. DESCRIPTION FIBER205KAN9FB-MM SC, Multimode Multimode205KAN9GB-MM LC, Multimode MultimodeOR-85400010 Field Installation Kit AnaerobicOR-61500858 OptiMo 12 Fiber Breakout Kit


2-9


www.accu-tech.com

2

BERK-TEK GIGALITE FIBER OPTIC CABLESPART No. CABLE TYPE FIBER TYPE FIBERS BANDWIDTH–EMBICP002-LB3010/75 Horizontal Interconnect (Tight Buffer) Plenum 50/125 2 750/500ICP004-GB3510/25 Horizontal Interconnect (Tight Buffer) Plenum 62.5/125 4 350/500PDR006-LB3010/75 Premise Distribution (Tight Buffer) Riser 50/125 6 750/500PDR012-GB3510/25 Premise Distribution (Tight Buffer) Riser 62.5/125 12 350/500LTR0X024-LB3010/75 Adventum Indoor/Outdoor (Loose Tube-dry) Riser 50/125 24 750/500LTR12B048-GB3510/25 Adventum Indoor/Outdoor (Loose Tube-dry) Riser 62.5/125 48 350/500

BERK-TEK PRE-TERMINATED TRUNK CABLESPART No. DESCRIPTIONBLKP72L77SSPxxx* Adventum Indoor/Outdoor With ArmorTek, Plenum, 72 Fiber, 50/125 µm (700/500 MHz-km), GIGAlite, Multimode,

Orange Jacket, MTP To MTP, Female With 39" Break-out Each End, Standard Pulling Eye On Pulling End Only, xxx = Length In Feet

BPDP48C44SSPxxx* Premises Distribution, Plenum, 48 Fiber, 62.5/125 µm (200/500 MHz-km), Multimode, Orange Jacket, LC/PC WithDuplex Clip To LC/PC With Duplex Clip, 39" Break-out Each End, Standard Pulling Eye On Pulling End Only, xxx = Length In Feet

BERK-TEK PRE-TERMINATED MTP-MTP CABLE ASSEMBLIESPART No. DESCRIPTIONBMDP12E77SSPxxx* 12 Fiber, Pre-terminated Micro Data Center Plenum Cable, MTP To MTP, 50/125 LOMF, EMB: 2000/500 (MHz-km)

@850/1300 nm, Aqua, Plenum, One Pulling EyeBMDP24E77SSPxxx* 24 Fiber, Pre-terminated Micro Data Center Plenum Cable, MTP To MTP, 50/125 LOMF, EMB: 2000/500 (MHz-km)

@850/1300 nm, Aqua, Plenum, One Pulling EyeBMDP48E77SSPxxx* 48 Fiber, Pre-terminated Micro Data Center Plenum Cable, MTP To MTP, 50/125 LOMF, EMB: 2000/500 (MHz-km)

@850/1300 nm, Aqua, Plenum,One Pulling EyeBMDP72E77SSPxxx* 72 Fiber, Pre-terminated Micro Data Center Plenum Cable, MTP To MTP, 50/125 LOMF, EMB: 2000/500 (MHz-km)

@850/1300 nm, Aqua, Plenum, One Pulling EyeNote: xxx = length in feet

BERK-TEK PRE-TERMINATED TRUNK CABLESPART No. DESCRIPTIONBLKP72E74SSP100 72 Fiber Adventum Trunk Cables With ArmorTek With GIGAlite-10, MTP Female With 39" Break-out To LC/PC With

Duplex Clip, 100', 50/125 µm, 2000/500 EMBBPDP48X44SSD500 48 Fiber Premises Distribution, Trunk Cables, Plenum, With GIGAlite-10XB, LC/PC With Duplex Clip And 39" Break-out

To LC/PC, 500', 50/125 µm, 4900/500 EMB

BERK-TEK OPTICAL FIBER PRODUCTSPART No. CABLE TYPE FIBER TYPE FIBERS BANDWIDTH–EMBICP002-EB3010/25 Horizontal Interconnect (Tight Buffer) Plenum 50/125 2 2000/500ICP004-XB3510/X5 Horizontal Interconnect (Tight Buffer) Plenum 50/125 4 4900/500MDP024-EB3010/75 Micro Data Center Plenum (Loose Tube) 50/125 24 2000/500MDP024-XB3010/75 Micro Data Center Plenum (Loose Tube) 50/125 24 4900/500PDR012-XB3510/X5 Premise Distribution (Tight Buffer) Riser 50/125 12 4900/500LTR0X024-EB3010/25 Adventum Indoor/Outdoor (Loose Tube-dry) Riser 50/125 24 2000/500LTR12B048-XB3510/X5 Adventum Indoor/Outdoor (Loose Tube-dry) Riser 50/125 48 4900/500

Note 1: Contact Berk-Tek Customer Service at 1-800-BERK-TEK for complete listings of product offerings.

Note 2: Effective Modal Bandwidth (EMB) per EIA/TIA-455-220. Visit www.berktek.com for GIGAlite optical fiber specifications.

Note 3: GIGAlite-10 (EB) optical fiber enables 10G Ethernet transmission across a 300 meter length; XB supports 10G Ethernet across 600 meters.

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 9


2-10

SOLUTIONNetClear® MM10 Optical Fiber


www.accu-tech.com

2

NetClear MM10 fiber optic solutions feature GIGAlite™-10 and GIGAlite-10XB multimode fiber, guaranteed to support 10 Gigabit Ethernet to industry leading distances, and Ortronics connectivity forindustry-leading insertion-loss performance. They are engineered for high-speed performance in data centers/storage area networks (DC/SAN), the horizontal, backbone, and campus fiber optic

structured cabling system.


FC SERIES RACK-MOUNT PATCH CABINETS, BLACKADAPTER PANEL

PART No. CAPACITY HEIGHT TRAY OPERATIONOR-FC01U-P 3 1U Front/Rear SlidingOR-FC02U-P 6 2U Front/Rear SlidingOR-FC03U-P 9 3U Front/Rear SlidingOR-FC04U-P 12 4U Front/Rear Sliding


ADAPTER PANELS, AQUA, CERAMIC SLEEVEPART No. FIBER COUNT STYLEOR-OFP-SCD06LC 6 SC, DuplexOR-OFP-SCD12LC 12 SC, DuplexOR-OFP-LCD12LC 12 LC, DuplexOR-OFP-LCQ24LC 24 LC, Quad

FIB-OR-COP II WORKSTATION OUTLETSPART No. DESCRIPTIONOR-62100041 TracJack® Fib-Or-Cop IIOR-62100040 Series II® Fib-Or-Cop II

PATCH CORDS, DUPLEX, 50/125 LASER OPTIMIZED MULTIMEDIA FIBERPART No. DESCRIPTIONOR626DF2LR-FFxxxM SC to SCOR626DF2LR-GGxxxM LC to LC

Note: xxx = length in meters

ORTRONICS FIELD-INSTALLABLE CONNECTORSNo epoxy/no polish zirconia ferrule, for tight buffered cable (25 per pack)

PART No. DESCRIPTION FIBER205KAS9FB-50T SC 50/125205KAS9GB-50T LC 50/125OR-854A00000-1 Field Installation Kit Pre-polished

ANAEROBIC TERMINATION, ZIRCONIA FERRULE IDEAL FOR ADVENTUM CABLE(25 PER PACK)PART No. DESCRIPTION FIBER205KAN9FB-MM SC, Multimode Multimode205KAN9GB-MM LC, Multimode MultimodeOR-85400010 Field Installation Kit AnaerobicOR-61500858 OptiMo 12 Fiber Breakout Kit

ORTRONICS MOMENTUM® 2 CASSETTES (4900/500 MHz-KM)PART No. DESCRIPTION HEIGHTOR-M2LCQ24-50E 10G, 50LC Quad, 1U

24 Fiber, 2 MTP With PinsOR-M2SCD12-50E 10G, 50LC Quad, 1U

24 Fiber, 2 MTP With Pins


Ortronics Mighty Mo Components

PART No. NETCLEAR MIGHTY MO 6 COMPONENTS DESCRIPTIONOR-MM6710 Cable Management Rack MM6 Rack With 10.5" Channel Depth, 7 Foot, 45 Rack UnitsOR-MM6716 Cable Management Rack MM6 Rack With 16.25" Channel Depth, 7 Foot, 45 Rack UnitsOR-MM67SVR Cable Management Rack MM6 Rack With Four-post Server Frame, 7 Foot, 45 Rack UnitsOR-MM6VMD710 Vertical Cable Management MM6 Vertical Manager With Fingers And Door, 10" x 13" x 7 Foot OR-MM6VMD706 Vertical Cable Management MM6 Vertical Manager With Fingers And Door, 6" x 8" x 7 FootOR-MM6VMR710 Rear Vertical Cable Management Cage MM6 Vertical Manager With Latches For Routing Cable To Rear Of FC Series CabinetsOR-MM6HMF2RU Horizontal Cable Management Panel MM6 Cable Management Panel With Fingers, Cover, 2 Rack Units, 3.5" x 19"

2-11


www.accu-tech.com

2

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 11


2-12

SOLUTIONNetClear® SM Optical Fiber


www.accu-tech.com

2


FC Series rack-mount patch cabinets, black

ADAPTER PANEL PART No. APPLICATION CAPACITY HEIGHT OPERATIONOR-FC01U-P Patching 3 1U Front/Rear SlidingOR-FC02U-P Patching 6 2U Front/Rear SlidingOR-FC03U-P Patching 9 3U Front/Rear SlidingOR-FC04U-P Patching 12 4U Front/Rear SlidingOR-FC02U-C Patch/Splice 6 2U Front/Rear SlidingOR-FC03U-C Patch/Splice 9 3U Front/Rear SlidingOR-FC04U-C Patch/Splice 12 4U Front/Rear Sliding


ADAPTER PANELS, BLUE, CERAMIC SLEEVEPART No. FIBER COUNT STYLEOR-OFP-SCD12AC 12 SC, DuplexOR-OFP-LCD12AC 12 LC, DuplexOR-OFP-LCQ24AC 24 LC, Quad

FUSION SPLICE ACCESSORIESPART No. DESCRIPTIONOR-FST-F012 12" Fusion Splice TrayOR-20500043 40 mm Heat Shrink, Fusion Splice Protection Cover

PATCH CORDS, UPC, 1 METER LENGTHPART No. DESCRIPTIONOR-626DC2IR-RR001M SC to SC, DuplexOR-626DC2IR-SS001M LC to LC, Duplex

ORTRONICS® FIELD-INSTALLABLE CONNECTORSNo epoxy/no polish zirconia ferrule, for tight buffered cable (25 per pack)

PART No. DESCRIPTION FIBER205KAS9FB-09 SC Single-mode205KAS9GB-09 LC Single-modeOR-854A00000-1 Field Installation Kit Pre-polished

ANAEROBIC TERMINATION, ZIRCONIA FERRULE IDEAL FOR ADVENTUM CABLE (25 PER PACK)PART No. DESCRIPTION FIBER205KAN9FB-SM SC, Single-mode Single-mode205KAN9GB-SM LC, Single-mode Single-modeOR-85400010 Field Installation Kit AnaerobicOR-61500858 OptiMo 12 Fiber Breakout Kit

ORTRONICS MOMENTUM® 2 CASSETTES PART No. DESCRIPTION HEIGHTOR-M2LCQ24-09 LC Quad, 24 Fiber, Single-mode 1UOR-M2LCD12-09 LC Duplex, 12 Fiber, Single-mode 1U

NetClear SM single-mode fiber solutions are guaranteed to support Gigabit Ethernet and 10 Gigabit Ethernet in mission critical environments such as Data Centers, SANs and LANs.

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 12


BERK-TEK PRE-TERMINATED MTP-MTP CABLE ASSEMBLIESPART No. DESCRIPTIONBMDP48AEESSPxxx* 48 Fiber, Pre-terminated Micro Data Center

Plenum Cable, MTP To MTP, Single-mode,Yellow, Plenum

BMDP72AEESSPxxx* 72 Fiber, Pre-terminated Micro Data CenterPlenum Cable, MTP To MTP, Single-mode,Yellow, Plenum

Note: xxx = length in feet

PIGTAILS, UPC 2 METER LENGTHPART No. STYLE FIBEROR-626PC9FR-RZ002M SC 1OR-626PC9FR-SZ002M LC 1OR-626PC9FR-QZ002M ST 1OR-626SC4ZR-RZ002M SC 6OR-626SC4ZR-SZ002M LC 6OR-626SC4ZR-QZ002M ST 6OR-626TC4ZR-RZ002M SC 12OR-626TC4ZR-SZ002M LC 12OR-626TC4ZR-QZ002M ST 12

BERK-TEK GIGALITE FIBER OPTIC CABLESSingle-mode

PART No. CABLE TYPE FIBERS ICP002-AB0707 Horizontal Interconnect 2

(Tight Buffer) PlenumICP004-AB0707 Horizontal Interconnect 4

(Tight Buffer) PlenumPDR006-AB0707 Premise Distribution 6

(Tight Buffer) RiserPDR012-AB0707 Premise Distribution 12

(Tight Buffer) RiserLTR0X024-AB00403 Adventum Indoor/Outdoor 24

(Loose Tube-dry) RiserLTP12B048-AB0403 Adventum Indoor/Outdoor 48

(Loose Tube-dry) PlenumOPDD12B072-AB0403 Outside Plant (Loose Tube, 72

Gel Buffer Tube)OPDD12B144-AB0403 Outside Plant (Loose Tube, 144

Gel Buffer Tube)MDP072-AB0403 Micro Data Center Plenum 72

(Loose Tube)

2-13


www.accu-tech.com

2

Wiremold®4000® Designer Series Steel RacewayThe DS4000® raceway is a 10 Gig Ready™ system that features high capacity and unique crossover fittings that provide greater space within the race-way to accommodate the larger diameter 10G cable. The DS4000 raceway is also Fiber Ready™ to maintain the proper 2" bend radius for both copperand fiber cables.

WIREMOLD COMPONENTSPART No. DESCRIPTIONDS4000B Raceway Base. Galvanized Steel. Packed Four 10' Lengths Per cartonDS4000C* Raceway Cover. Galvanized Steel. Packed Eight 5' Lengths Per CartonDS4001 Adjust-to-Fit Coupling. For Joining Lengths Of DS4000B Together. Sold In PairsDS4006* Seam Clip. For Covering Seams Where Two Sections Of DS4000C Come TogetherDS4010A* Entrance End Fitting. Full-capacity End Fitting Includes Four 3/4" And 1 1/4" Concentric Trade Size Kos

And Four 2 1/8" Large Capacity KosContact your local Accu-Tech rep for a complete list of available fittings.

Add suffix to indicate color. “-DV” = Designer Ivory, “-DG” = Designer Gray, “-BK” = Matte Black, “-BZ” = Metallic Bronze.

7C0002X0_s02.qxd 4/8/08 11:04 AM Page 13


netclear. delivering reliability.ortronics new clarity maximum density patch panels offer 48 ports...

Documents