NETGEAR SETUP WIZARD

To be able to accessthe Netgear wirelessrouter, you need toproperly check thesteps pertaining toIP addressconfiguration.

COMMON ISSUES RELATED TO NETGEARSETUP

If the router shows ‘limited access’,

then it means that there is a problem

with the configuration process.

There is a common problem that

people face in their Netgear wireless

router, i.e., limited access to the

network resources.

LET US TAKE A LOOK HOW YOU CAN GET RID OF THE ISSUE.

• This first thing that you

have to check is that,

the access point or

Netgear router is

properly configured

and turned on.

• You also need to check

if the network adapter

is enabled or not.

LET US TAKE A LOOK HOW YOU CAN GET RID OF THE ISSUE.

• The next step is pertaining to the

IP address. You have to release

and renew it on the N/W adapter.

• The problem must have been

solved by now, but if it doesn’t,

then you have to power cycle your

PC. To do so, you have to turn

your PC and router off for a few

seconds and then, turn them on.

YOU SHOULD TAKE THE HELP OF A TECHNICAL SUPPORT THAT PROVIDES ALL THE ASSISTANCE RELATED TO NETGEAR WI-FI EXTENDER SETUP.

www.netgearroutersetup.com or call toll free at +1-855-856-2653.