network solution product catalogue 2020
TRANSCRIPT
NETWORK
SOLUTION
Product Catalogue
2020
Index
About Us ..................................................................................................................................... 5
Solution Overview ....................................................................................................................... 6
Product Overview ........................................................................................................................ 7
ComFlex Pro DAS Series .............................................................................................................. 26
Active Conditioning Unit SE Version ........................................................................... 26
Active Conditioning Unit SE-2 Version ........................................................................ 28
3.5GHz Active Conditioning Unit SE Version .............................................................. 30
3.5GHz Active Conditioning Unit SE -02 Version ........................................................ 32
ComFlex Pro High Power .............................................................................................. 34
ComFlex Pro Low Power DAS....................................................................................... 37
ComFlex Pro Low Power DAS (850+2300) ................................................................... 40
ComFlex Pro Low Power DAS (850+2100+2300) ......................................................... 42
ComFlex Pro Low Power DAS (700+900+1800+2600)................................................. 45
ComFlex Pro Low Power DAS (900+1800+2100+2600)............................................... 47
ComFlex Pro Low Power DAS (E900+1800+2100+2600) ............................................ 49
ComFlex Pro Low Power DAS (850+1900+EAWS+2600) ............................................ 51
ComFlex Pro Low Power DAS (1900+EAWS+EAWS) ................................................. 53
ComFlex Pro Low Power DAS (1900+EAWS+2600+2600) .......................................... 55
ComFlex Pro Low Power DAS (700+1800+2100+2600)............................................... 57
ComFlex Pro Low Power DAS (850+1800+2100+2600)............................................... 59
ComFlex Pro Low Power DAS (700+1900+EAWS+2600) ............................................ 61
5G ComFlex Pro Low Power DAS (3.5GHz 200MHz) .................................................. 63
5G ComFlex Pro Low Power DAS (3.5GHz-L 300MHz) ............................................... 65
5G ComFlex Pro Low Power DAS (3.5GHz-U 300MHz) ............................................... 67
ComFlex DAS Series.................................................................................................................... 70
ComFlex CM 20W ........................................................................................................... 70
ComFlex AM .................................................................................................................... 73
RX Series Digital Band Selective Repeater ...................................................................................... 78
RX-0739 ........................................................................................................................... 80
RX-8039 ........................................................................................................................... 81
RX-8132 ........................................................................................................................... 82
RX-9139 ........................................................................................................................... 83
RX-1839 ........................................................................................................................... 84
RX-1939 ........................................................................................................................... 85
RX-2139 ........................................................................................................................... 86
Multi-band Digital Band Selective Repeater..................................................................................... 88
RX-7137 ........................................................................................................................... 91
RX-7539 ........................................................................................................................... 93
RX-7639 ........................................................................................................................... 95
RX-7839 ........................................................................................................................... 97
RX-5239 ........................................................................................................................... 99
Digital Channel Selective Repeater-LTE ........................................................................................ 101
RX-0823 ......................................................................................................................... 103
RX-2623 ......................................................................................................................... 104
RX-9123 V5 .................................................................................................................... 106
RX-1823 III3 ................................................................................................................... 107
RX-2123 V5 .................................................................................................................... 108
mBDA Series Digital Band Selective Repeater ............................................................................... 109
mBDA-0733 .................................................................................................................... 111
mBDA-0833 .................................................................................................................... 112
mBDA-8133 .................................................................................................................... 113
mBDA-9133 .................................................................................................................... 114
mBDA-1833 .................................................................................................................... 115
mBDA-1933 .................................................................................................................... 116
mBDA-2033 .................................................................................................................... 117
mBDA-2133 .................................................................................................................... 118
mBDA-2633 .................................................................................................................... 119
Combiner for Dual Single Band mBDAs ....................................................................................... 120
mBDA Indoor Digital Band Selective Repeater .............................................................................. 122
mBDA-100 ..................................................................................................................... 122
mBDA-200S ................................................................................................................... 126
mBDA-300 ..................................................................................................................... 132
MP Series Digital Pico Repeater .................................................................................................. 138
MP-0832 ......................................................................................................................... 139
MP-9132 ......................................................................................................................... 140
MP-1832 ......................................................................................................................... 141
MP-2132 ......................................................................................................................... 142
Multi-band Digital Pico Repeater ................................................................................................. 143
MP-7S32 ......................................................................................................................... 144
MP-7U32 ........................................................................................................................ 146
MP-7V32 ......................................................................................................................... 147
MP-7532 ......................................................................................................................... 149
MP-7632 ......................................................................................................................... 151
MP-7832 ......................................................................................................................... 153
MP-5K32 ........................................................................................................................ 154
MP-5232 ......................................................................................................................... 155
MP-5632 ......................................................................................................................... 156
MP-5832 ......................................................................................................................... 157
CriticalPoint™ Public Safety Bi-Directional Amplifier ..................................................................... 159
RX-7W22 Class A PS 700/800MHz BDA ...................................................................... 159
RX-7W22 Class B PS 700/800MHz BDA ..................................................................... 162
RX-7W22 II2 5W Class A PS 700/800MHz BDA .......................................................... 165
RX-7W22 II2 5W Class B PS 700/800MHz BDA .......................................................... 167
RX-4122 PS UHF 400MHz BDA .................................................................................... 169
CriticalPoint™Public Safety Distributed Antenna System ............................................................... 171
RH-7W22 PS 700/800MHz DAS .................................................................................... 171
CriticalPoint™ Public Safety Backup Battery Unit .......................................................................... 174
PSU-9248 ....................................................................................................................... 174
Home Small Cell ........................................................................................................................ 176
HNB-35,A01 ................................................................................................................... 176
Enterprise Small Cell ................................................................................................................. 178
ENB-35 ........................................................................................................................... 178
Distributed Small Cell ................................................................................................................ 180
4G Distributed Small Cell ............................................................................................ 180
5G Distributed Small Cell ............................................................................................ 186
5G Indoor CPE .......................................................................................................................... 191
CP2600-IP, A30 .............................................................................................................. 191
Outdoor CPE ............................................................................................................................ 194
CP2600-OP, A10 ............................................................................................................ 194
CP2600-OP, A20 ............................................................................................................ 196
CP2600-OP, A21 ............................................................................................................ 198
5G Outdoor CPE .................................................................................................................. 200
CP2600-OP, A31 ............................................................................................................ 200
Coverage Management System ................................................................................................... 203
CMS V8.19.4 .................................................................................................................. 203
Contact Information ................................................................................................................... 206
About Us
Comba Telecom is a leading supplier of infrastructure and wireless enhancement solutions to mobile operators and enterprises to
enhance and extend their wireless communications networks. Established in 1997, and listed on the Hong Kong Stock Exchange
in 2003, it has grown to become a global supplier with its extensive distribution network and 80+ offices globally.
With seasoned team of research and development engineers and its state-of-the-art design tools and testing equipment, Comba
is able to provide its innovative patented designs and yet cost-effective products to the customers. After working with Operators /
Private enterprise networks seamless all over the word for more than 10 years, it is able to help the customers to roll out their full
scale range network quickly with the professional, customized, qualityguarantee product solutions.
Comba Network Solution Business Unit offers full range of wireless enhancement products, also Coverage Management System
(CMS) for wireless communication network systems, which include:
⚫ Active DAS
⚫ Wireless Repeater
⚫ Public Safety Repeater
⚫ Small Cells+ CPE
⚫ Coverage Management System
Comba is committed to quality consistency and environmental protection and is ISO9001 and ISO14001 certified. With its highly
efficiency production lines in China and strict process control system, Comba's manufacturing facility is able to deliver high volume
products with consistent quality.
Comba Manufacturing Facility in Guangzhou, China Comba R&D Centre in Guangzhou, China
Solution Overview
Solution Overview Comba’s wide range of indoor/outdoor repeater products provide total solutions for mobile network from covering blind sports to
implementing integrated coverage systems. The deployment of repeaters will effectively optimized network efficiency by
centralizing / redirecting traffic capacity and enhancing power budget.
⚫ Compliant to all major technologies including GSM, CDMA, WCDMA, LTE, Tetra and 5G NR.
⚫ Widely frequency range compliance e.g. 700MHz, 800MHz, 850MHz, 900MHz, 1800MHz, 1900MHz,AWS, 2100MHz,
2300MHz, 2600MHz and 3500MHz.
⚫ Support multi-modulations and multi-operators applications so that providing cost-effective solutions.
⚫ Support various output power from 0.01 W to 40 W.
⚫ Wide range of product line that can be used from high-rise building to underground railway for all kinds of applications.
© 2014 Comba Telecom. All Rights Reserved11
In-Building SolutionsStadium/Large VenuesScenic Areas
(Camouflaged Solutions)
Rural Area Solutions
Wireless Backhaul Solutions
Subways & Tunnels
Metro Area Solutions
Base Station Solutions
Applications
Product Overview
ComFlex Pro Solution
ComFlex Pro High Power Solution
Highlight
⚫ Independent gain control for each input.
⚫ DAU supports 8 DRU, and DRU can cascade up to 32.
⚫ Support 7 bands per system.
⚫ 20W Output power, 2x2 MIMO for each RFU.
⚫ Support 12.5Gb/s*2 data rate and maximum optical pathloss of 10dB.
ComFlex Pro Low Power Solution
Highlight
⚫ Independent gain control for each input.
⚫ Supports max.192 DPU with 1 DAU and 16DEUs
⚫ Support 4 bands 2*2 MIMO or 1 band 4*4 MIMO.
⚫ Integrated Omni antenna or external antennas. ⚫ Support 12.5Gb/s*2 data rate and maximum optical pathloss of 10dB.
ComFlex Pro Low Power Solution – 5G
ComFlex Pro Low Power Solution – 5G
• A digitalized system to combine multiple services support band 3500MHz
• Flexible distributed structure and expansion star connection and cascaded connection.
• Integrated delay adjustment feature.
• Built-in Cellular modem for remote controlling and monitoring.
• 4*4 MIMO Integrated Omni antennas.
ComFlex Solution
Comba DAS - ComFlex Series Overview
ComFlex AM
(ACU + Modular RU)
Highlight
⚫ Max. 100W input power from BTS.
⚫ -163dBc PIM.
⚫ WEB GUI, RF routing and diagnosis function.
⚫ Max. supports 32 RF input and 32 RUs connection.
⚫ Modular designed RU supports up to 8 bands, 20W per band without fan.
ComFlex CM
(Common MU + Modular RU)
Highlight
⚫ Max. supports 8 RF input and 16 RUs.
⚫ Modular design easy for upgrade and maintenance.
⚫ Supports multi-operator input and each adjustable gain.
⚫ Modular designed RU supports up to 8 bands, 20W per band without fan.
⚫ WEB GUI, automatic calibration and commissioning
Comba Wireless Repeater Series Overview
Band
Selective
Series
Channel Selective
Series
Wireless High Power RX Series
Indoor mBDA Series
Wireless Medium Power mBDA Series
Outdoor mBDA Series
Wireless Low Power Pico Series
Single band mPico Multi-Band mPico
Highlight:
Support indoor/outdoor.
4 Sub bands, 90 dB gain.
5/10/20W output power.
Support Dual/Tri Bands.
Highlight:
Support indoor / outdoor.
4 Carriers / 2 Sub bands
Support ICS, 95 / 105dB gain.
10/20W output power.
Highlight:
Support indoor.
4 Sub bands, 80 dB gain.
0.5/1/2W output power.
Support up to 6 Bands.
Highlight:
Support outdoor.
4 Sub bands, 80 dB gain.
0.5/1/2W output power.
Support Dual/Tri Bands.
Highlight:
Support indoor.
2 Sub bands, 75 dB gain.
20dBm output power.
Support Single Band.
Central Freq./ band width settable.
Highlight:
Support indoor.
2 Sub bands, 75 dB gain.
15/17dBm output power.
Support Dual/Tri Bands.
Central Freq./ band width settable.
Public Safety Series Overview
BDA DAS
Public Safety Series Overview
BBU
Highlight:
Support Class A and Class B
Support 32 channels for Class A
Support 0.5/2/5W output power
FCC/UL certificated
Highlight:
Support Class A and Class B
Support 32 channels for Class A
Support 2W output power
Support 32 remote units maximum
FCC/UL certificated
Highlight:
Support -48V 55AH or -48V 100AH
Support multi alarms
FCC/UL certificated
CMS Typical Network Management Diagram
Comba Base Station Series Overview
Indoor Base Station Solution
Comba Wireless Access Product
Highlight:
Support different scenarios application from hundreds to ten thousand square meters
Support different Single/Dual Band operation
Different output power level50mW/100mW/125mW and cascade networking
Comba User Equipment Overview
CPE
Highlight:
5G NR Sub-6G n41/n77/n78n/79
4 x 4 MIMO
Up to 2.5Gbps download speed
Wi-Fi 802.11 a/b/g/n/ac, 4 x 4 MIMO
Highlight:
5G NR Sub-6G n41/n77/n78/
4 x 4 MIMO
Up to 2.5Gbps download speed
Up to 580Mbps download speed
5G Indoor CPE
E
5G Outdoor CPE
ComFlex DAS Series Product Profile
DAS Series
Product Photo Name Power Bands System
ComFlex
DAS
ComFlex MU
1 W
(Max.
Input)
700/800E/850/900/1800
/1900/AWS/2100/2300/
2600
Max. 8
GSM/UMTS/
LTE/CDMA
ComFlex
Plus ACU
100 W
(Max.
Input)
700/800E/850/900/1800
1900/AWS/2100/2300/
2600
Max. 32
GSM/UMTS/
LTE/CDMA
Modular RU 10/20W
(Output)
700/800E/850/900/1800
/
1900/AWS/2100/2300/
2600
Max. 8
GSM/UMTS/
LTE/CDMA
ComFlex DAS Series Product Profile
DAS Series
Product Photo Name Power Bands System
ComFlex
Pro
ACU SE
46dBm
(Max.
Input)
700/800E/850/900/1800
/1900/EAWS/2100/2300
/2600/3500
GSM/UMTS/
LTE/CDMA
NR
ACU SE-2
46dBm
(Max.
Input)
700/800E/850/900/1800
/1900/EAWS/2100/2300
/2600/3500
GSM/UMTS/
LTE/CDMA
NR
DAU /
700/800E/850/900/1800
/1900/EAWS/2100/2300
/2600/3500
GSM/UMTS/
LTE/CDMA/
NR
Low Power
DEU /
700/800E/850/900/1800
/1900/EAWS/2100/2300
/2600/3500
GSM/UMTS/
LTE/CDMA/
NR
Low Power
DPU
17dBm
21dBm
23 dBm
(Max.
Output)
700/800E/850/900/1800
/1900/EAWS/2100/2300
/2600/3500
GSM/UMTS/
LTE/CDMA/
NR
High Power
DRU
43dBm
(Max.
Output)
700/800E/850/900/1800
/1900/EAWS/2100/2300
/2600
GSM/UMTS/
LTE/CDMA
Wireless Enhancement Product Profile
Wireless Repeater High Power RX Series
Product Photo Name Power Bands System
Band
Selective
RX Series
RX-xx39 5/10W/2
0W
800/850/900/1800/1900/
2100
GSM/
UMTS/
LTE
Channel
Selective
RX Series
RX-xx23 5/10W/2
0W E800/2600 LTE
Channel
Selective
RX Series RX-xx23 10
/20W 900/1800/2100
UMTS/
LTE
Wireless Enhancement Product Profile
Wireless Repeater Medium Power mBDA Series
Product Photo Name Power Bands System
mBDA
Outdoor
mBDA-xx33 0.5/1/
2 W
800E/850/900/1800/1900
AWS/2100/2600
GSM/
UMTS/
LTE/CDMA
mBDA
Indoor
mBDA-RF-
xx00
0.5/1/
2 W
800E/850/900/1800/1900
AWS/2100/2600
GSM/
UMTS/
LTE/CDMA
Wireless Repeater Low Power Pico Series
Product Photo Name Power Bands System
Single
Bandm
Pico
MP-xx32 15/17/20
dBm
800/850/900/1800/1900/
2100/2600
GSM/
UMTS/
LTE/CDMA
Multi
Band
mPico
MP-xx32 17/20
dBm 800/900/1800/2100
GSM/
UMTS/
LTE/CDMA
Public Safety Product Profile
Public Safety Series
Product Photo Name Power Bands System
BDA
RX-7W22
0.5/2W 700/800 P25
BDA
RX-7W22 5W 700/800 P25
BDA
RX-4122 2W UHF P25
DAS
RH-7W22 2W 700/800 P25
BBU
PSU-9248 / -48V/55AH
Or -48V/100AH /
Wireless Access Product Profile
Small Cell Series
Product Photo Name Power Bands System
Home
Small Cell
HNB-35,A01 50mw
x 2 1800/2100/2300 LTE
Enterprise Small
Cell
ENB-35L
125mw x 2
2100/1800/2300/
2600 LTE
Distributed Small
Cell
ENB-35
ENB-50
125mw x 2
+
250mw x4
FDD 1800, 2100
NR 2600, 3500 LTE/ 5G NR
Wireless Access Product Profile
Product Photo Name Network Features
5G Indoor CPE
CP2600-IP,
A30 4+5G
5G NR Sub-6G n41/n77/n78n/79
LTE low band:
B5 850/ B8 900/ B18 850/ B19 850/
B20 850/ B26 850/ B28 750
LTE middle band:
B1 2100/ B3 1800/ B7 2600/ B32
1450/ B34 2000/ B38 2600/ B39
1900/ B40 2350/ B41 2600
LTE high band: B42 3500
5G Outdoor CPE
CP2600-OP,
A31 4+5G
5G NR Sub-6G n41/n77/n78/
LTE low band:
B5 850/ B8 900/ B18 850/ B19 850/
B20 850/ B26 850/ B28 750
LTE middle band:
B1 2100/ B3 1800/ B7 2600/ B32
1450/ B34 2000/ B38 2600/ B39
1900/ B40 2350/ B41 2600
LTE high band: B42 3500
4 x 4 MIMO
4G Outdoor CPE
CP2600-OP,
A21 LTE
High Band: B42 3500/ B43 3700/ B48
3600
3GPP Release 12 Cat 15
Up to 80MHz Carrier Aggregation
4 x 4 MIMO
Up to 580Mbps download speed
4G Outdoor CPE
AP2600-OP,
A20 LTE
Middle Band: B2 1900/ B66 1900
High Band: B42 3500/ B43 3700/
B48 3600
Up to 80MHz Carrier Aggregation
Product Application Scenario Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 1: Mega (>10,000 m2)
Product Recommend:
DAS ComFlex Pro High/Low power
DASComFlex AM
Product Recommend:
DAS ComFlex Pro High/Low power
Small Cell - Distributed Small Cell
Product Recommend:
DAS ComFlex Pro High power
DASComFlex AM
Product Recommend:
DAS ComFlex Pro High power
DASComFlex CM
DASComFlex AM
Large Stadiums Shopping Mall
Air Port Railway / Metro
Product Application Scenario Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 2: Large (5,000 – 10,000 m2)
Product Recommend:
Wireless RepeaterRX Series
Base Station
Product Recommend:
DAS ComFlex Pro High/Low power
Wireless RepeaterRX Series
Small Cell - Distributed Small Cell
Product Recommend:
DAS ComFlex Pro High/Low power
Wireless RepeatermBDA Indoor Series
DASComFlex CM
Small Cell - Distributed Small Cell
Product Recommend:
DAS ComFlex Pro High/Low power
Small Cell- Enterprise Small Cell
Remote Village Campus
Enterprise & Manufacture Residential
Product Application Scenario
Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 3: Medium (1,000 – 5,000 m2)
Product Recommend:
• DAS ComFlex Pro High power
• Wireless RepeaterRX Series
Product Recommend:
• DAS ComFlex Pro High power
• Wireless RepeaterRX Series
Product Recommend:
• Wireless RepeaterRX Series
• Wireless RepeatermBDA Series
Product Recommend:
• DAS ComFlex Pro High/low power
• Small Cell - Distributed Small Cell
Parking & Underground Tunnel
Park Supermarket
Product Application Scenario
Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 4: small (< 1,000 m2)
Product Recommend:
• DAS ComFlex Pro low power
• Wireless Repeater mBDA Series
• Wireless RepeaterPico
• Small Cell – Enterprise Small Cell
Product Recommend:
• Wireless RepeatermBDA Series
• Wireless RepeaterPico
• Small Cell – Enterprise Small Cell
Product Recommend:
• DAS ComFlex Pro low power
• Wireless RepeatermBDA Series
• Wireless RepeaterPico
• Small Cell – Enterprise Small Cell
Product Recommend:
• Wireless RepeatermBDA Series
• Wireless RepeaterPico
• Small Cell – Home Small Cell
Retail Store Restaurant
Small Office Villa
Product Application Scenario
Comba solutions are effective point-to-point/point-to-multipoint distributed antenna system that provides
effective coverage enhancement. The Comba product offers service providers an optimal solution for
multiple applications from a single building to a campus, mega mall, or sports arena and beyond.
Product application Scenario 5: Special Scenario1
Product Recommend:
• Wireless Repeater Public Safety Series
• Small Cell – Enterprise Small Cell
Product Recommend:
• Wireless Repeater mBDA Series
• Wireless Repeater Pico Series
Product Recommend:
• Wireless RepeatermBDA Series
• Wireless Repeater Pico
Product Recommend:
• Wireless RepeatermBDA Series
• Wireless Repeater Pico
• Small Cell – Enterprise Small Cell
Bridge Coverage
Highway Coverage Sail Coverage
Public Safety
Page 25 of 210
ComFlex Pro DAS Series
Page 26 of 210
ComFlex Pro DAS Series
Active Conditioning Unit SE Version
Features
• Low PIM to BTS (≤-153dBc).
• Supports 16 ACU cascade.
• 4 inputs for the same frequency band in one Chassis.
• Duplex input from BTS and simplex output.
• Max. DL input power of 46dBm.
• Web based GUI.
• Active ATT, input power detection and ALC protection for each RF module.
Functional Block Diagram
Specifications
Supported Bands &Technologies
Bands Technologies Frequency Range (MHz)
Downlink (DL) Uplink (UL)
700MHz (APAC) LTE 758-803 703-748
800E MHz LTE 791-821 832-862
850MHz GSM/WCDMA/CDMA/LTE 869-894 824-849
900MHz GSM/WCDMA/HSPA/LTE 925-960 880-915
1800MHz GSM/WCDMA/HSPA/LTE 1805-1880 1710-1785
1900MHz LTE 1930-1995 1850-1915
EAWS LTE 2110-2200 1710-1780
2100MHz WCDMA/HSPA/LTE 2110-2170 1920-1980
2300MHz LTE 2300-2400 2300-2400
2600MHz LTE 2620-2690 2500-2570
Electrical
Max. Downlink Input Power dBm 46
Insert Loss Downlink
dB 43
Uplink 43
ATT Adjustable Range(1dB step) dB 0-25
PIM (43dBm x 2) dBc -153
Ripple dB 3
Return Loss dB TX/RX:≤ -20; TX, RX: ≤ -15
Page 27 of 210
Specifications
Mechanical
Dimensions, H x W x D mm 88 x 485x 400
Weight (approx.) kg 15
Power Supply VAC 100-240
Power Consumption (approx.) W 15
RF Connectors Input: 4.3-10, Output: QMA
Operating Temperature oC 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Page 28 of 210
Active Conditioning Unit SE-2 Version
Features
• Low PIM to BTS (≤-153dBc).
• Supports 16 ACU cascade.
• Support 2 groups of inputs for the same frequency band
in one Chassis.
• Each group support 2 BTS input, total 4 inputs in one ACU SE
• Duplex input from BTS and simplex output.
• Max. DL input power of 46dBm.
• Active ATT, input power detection and ALC protection for each RF module.
Functional Block Diagram
Specifications
Supported Bands &Technologies
Bands Technologies Frequency Range (MHz)
Downlink (DL) Uplink (UL)
700MHz (APAC) LTE 758-803 703-748
800E MHz LTE 791-821 832-862
850MHz GSM/WCDMA/CDMA/LTE 869-894 824-849
900MHz GSM/WCDMA/HSPA/LTE 925-960 880-915
1800MHz GSM/WCDMA/HSPA/LTE 1805-1880 1710-1785
1900MHz LTE 1930-1995 1850-1915
EAWS LTE 2110-2200 1710-1780
2100MHz WCDMA/HSPA/LTE 2110-2170 1920-1980
2300MHz LTE 2300-2400 2300-2400
2600MHz LTE 2620-2690 2500-2570
Page 29 of 210
Specifications
Electrical
Max. Downlink Input Power dBm 46
Insert Loss Downlink
dB 43
Uplink 43
ATT Adjustable Range(1dB step) dB 0-25
PIM (43dBm x 2) dBc -153
Ripple dB 3
Return Loss dB TX/RX:≤ -20; TX, RX: ≤ -15
Mechanical
Dimensions, H x W x D mm 88 x 485x 400
Weight (approx.) kg 15
Power Supply VAC 100-240
Power Consumption (approx.) W 15
RF Connectors Input: 4.3-10, Output: QMA
Operating Temperature oC 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Page 30 of 210
3.5GHz Active Conditioning Unit SE Version
Features
• 2*4 inputs for the same frequency band in one Chassis.
• One 3.5GHz ACU SE can support 2*2 MIMO
• Duplex input from BTS and simplex output.
• Max. DL input power of 46dBm.
• Web based GUI.
• Active ATT, input power detection and ALC protection for each RF module.
Functional Block Diagram
Specifications
Supported Bands &Technologies
Bands Technologies Frequency Range (MHz)
3500MHz 5G 3300-3700
PRELIMINARY
Page 31 of 210
Specifications
Electrical
Max. Downlink Input Power dBm 46
Insert Loss Downlink
dB 43
Uplink 43
ATT Adjustable Range(1dB step) dB 0-25
Ripple dB 3
Return Loss dB TX/RX:≤ -15; TX, RX: ≤ -15
Mechanical
Dimensions, H x W x D mm 88 x 485x 400
Weight (approx.) kg 15
Power Supply VAC 100-240
Power Consumption (approx.) W 25
RF Connectors Input: 4.3-10, Output: QMA
Operating Temperature oC 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Page 32 of 210
3.5GHz Active Conditioning Unit SE -02 Version Features
• One 3.5GHz ACU SE can support 4*4 MIMO
• Support 2 groups of inputs in one Chassis.
• Each group support 2 BTS input, total 4x2 inputs in one ACU SE
• Duplex input from BTS and simplex output.
• Max. DL input power of 46dBm.
• Web based GUI.
• Active ATT, input power detection and ALC protection for each RF module.
Functional Block Diagram
Specifications
Supported Bands &Technologies
Bands Technologies Frequency Range (MHz)
3500MHz 5G 3300-3700
PRELIMINARY
Page 33 of 210
Specifications
Electrical
Max. Downlink Input Power dBm 46
Insert Loss Downlink
dB 43
Uplink 43
ATT Adjustable Range(1dB step) dB 0-25
Ripple dB 3
Return Loss dB TX/RX:≤ -15; TX, RX: ≤ -15
Mechanical
Dimensions, H x W x D mm 88 x 485x 400
Weight (approx.) kg 15
Power Supply VAC 100-240
Power Consumption (approx.) W 25
RF Connectors Input: 4.3-10, Output: QMA
Operating Temperature oC 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Page 34 of 210
ComFlex Pro High Power
Features
• Modularized Remote Unit supports field upgrade and independent gain control.
• Small size with low power consumption and easy installation.
• Access Unit supports 8 Remote Unit directly, and Remote Unit can cascade up to 32.
• Support 7 bands per Optical Distributed Unit.
• 20W Output power for each band.
• Support 12.5 GB/s*2 data rate and maximum optical pathloss of 10dB.
• Full operation bandwidth system supports multi-operator application.
• Support all major technologies GSM, WCDMA and LTE and MIMO.
• Web based GUI for intelligent commissioning and configuration.
System Block Diagram
Page 35 of 210
Specifications
Optical
System 700MHz, 800E MHz, 850MHz, 900MHz, 1800MHz, 1900MHz,EAWS, 2100MHz, 2300MHz, 2600MHz
Optical Fiber Single Mode
Optical Wavelength nm 1270, 1330
Optical Output Power dBm -6 to -3
Data Rate Gb/s 12.5*2
Transmission Distance km 10 (Default) or 20
Optical By-pass Loss dB ≤ 0.5
Fiber Connectors LC/PC
Electrical
700MHz 800E MHz 850MHz 900MHz 1800MHz
SISO/MIMO MIMO MIMO MIMO MIMO MIMO
Frequency Range Uplink
MHz 703-748 832-862 824-849 880-915 1710-1785
Downlink 758-803 791-821 869-894 925-960 1805-1880
Operating Bandwidth MHz 45 30 25 35 75
Instantaneous Bandwidth MHz Full Band
Downlink Output Power dBm 37-43 37-43 37-43 37-43 37-43
Uplink Maximum Gain dB 50
Downlink Maximum Gain dB 50 @20W
ATT Adjustable Range (1dB step)
dB DAU: 0-30, DRU: 0-20
Pass Band Ripple (p-p) dB ≤ 4 ≤ 4 ≤ 4 ≤ 4 ≤ 4
Spurious Emission 3GPP TS 36.106
3GPP TS 36.106
3GPP TS 25.106
3GPP TS 25.106
3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at Maximum Gain
dB ≤ 5
System Delay sec ≤ 8
VSWR ≤ 1.5
Electrical
1900MHz EAWS 2100MHz 2300MHz 2600MHz
SISO/MIMO MIMO MIMO MIMO MIMO MIMO
Frequency Range Uplink
MHz 1850-1915 1710-1780 1920-1980
2300-2400 2500-2570
Downlink 1930-1995 2110-2180 2110-2170 2620-2690
Operating Bandwidth MHz 65 70 60 100 70
Instantaneous Bandwidth MHz 2300MHz: 80
Downlink Output Power dBm 37-43 37-43 37-43 37-43 37-43
Uplink Maximum Gain dB 50
Downlink Maximum Gain dB 50 @20W
ATT Adjustable Range (1dB step)
dB DAU: 0-30, DRU: 0-20
Pass Band Ripple (p-p) dB ≤ 4 ≤ 4 ≤ 4 ≤ 4 ≤ 4
Spurious Emission 3GPP TS 36.106
3GPP TS 36.106
3GPP TS 25.106
3GPP TS 36.106
3GPP TS 36.106
Uplink Noise Figure at Maximum Gain
dB ≤ 5
System Delay sec ≤ 8
VSWR ≤ 1.5
Page 36 of 210
Specifications
Mechanical---DAU
Dimensions, H x W x D mm 88 x 485 x 400
Weight (approx.) kg 13
Power Supply AC 100-240/50-60Hz
Power Consumption W 130
RF Connectors Cluster RF connector, simplex
Fiber Connectors LC/PC
Operating Temperature oC -10 to +45
Operating Humidity ≤ 85%
IP Level IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Mechanical---DRU
Dimensions, H x W x D
ODU mm
370 x 80 x 355
Per RFU 500 x 80 x 355
Weight (approx.) ODU
kg 12
Per RFU 18
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 220(per band)
RF Connectors 4.3-10, duplex per band
Fiber Connectors LC/PC
Operating Temperature oC -40 to +55
Operating Humidity ≤ 95%
IP Level IP65
Enclosure Cooling Convection
Installation Type Wall/ Pole
Page 37 of 210
ComFlex Pro Low Power DAS
Features
• A digitalized system to combine multiple services.
• Flexible distributed structure and expansion which supports maximum 192 Distributed Piont Units
(DPUs) with single DAU and 16 DEUs with combination of star and cascaded connection.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
• Integrated delay adjustment feature.
• Built-in LTE modem for remote controlling and monitoring.
• Meet3GPP standards.
• DPU can support 4 bands 2*2 MIMO or 1 band 4*4 MIMO and 2 bands 2*2 MIMO.
• Two types of DPU: DPU with integrated Omni antenna, DPU with individual single band ports for
external antennas.
Functional Block Diagram
Page 38 of 210
Specifications
System
System 700MHz, 800E MHz, 850MHz, 900MHz, 1800MHz, 1900MHz, EAWS, 2100MHz, 2300MHz,2600MHz
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Transmission Distance km DAU-DEU: 10km; DEU-DEU:2km; DEU-DPU:0.3km
Data Rate Gb/s 12.5
Electrical 700 800E 850 900 1800
Operating Frequency, Uplink MHz 703-748 832-862 824-849 880-915 1710-1785
Operating Frequency, Downlink MHz 758-803 791-821 869-894 925-960 1805-1880
Instantaneous Bandwidth MHz Max 45 Max 30 Max 25 Max 35 75
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 700/ 800/ 850/ 900: 17, 1800: 21
Maximum System Gain dB 700/ 800/ 850/ 900: 24, 1800: 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power
dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna / External Antenna (8 ports)
Impedance 50
Electrical 1900 EAWS 2100 2300 2600 FDD
Operating Frequency, Uplink MHz 1850-1915 1710-1780 1920-1980 2300-2400
2500-2570
Operating Frequency, Downlink MHz 1930-1995 2110-2180 2110-2170 2620-2690
Instantaneous Bandwidth MHz Max 65 Max 70 Max 60 Max 80 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 21
Maximum System Gain dB 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power
dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna or external antenna (8 ports)
Impedance 50
Page 39 of 210
Specifications
Power, Mechanical & Environmental
Dimensions, H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
Kg
13
DEU 18
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC Supplied by DEU/DC48V
Power Consumption (approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU SMA-Female (External antenna version)
Fiber Connectors
DAU LC/PC
DEU LC/PC
DPU LC/PC
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 40 of 210
ComFlex Pro Low Power DAS (850+2300)
Features
• A digitalized system to combine multiple services support band 850MHzand 2300MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (850/2300).
• Integrated Omni antenna.
Functional Block Diagram
Page 41 of 210
Specifications
System
System 850/2300 band 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 850
(CDMA2000) 850
(WCDMA) 2300
Operating Frequency, Uplink MHz 870-880 877.5-882.5 2300-2390
Operating Frequency, Downlink MHz
Operating Bandwidth Per Sub-band MHz Max. 10 Max. 5 Max. 80
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 850: 17, 2300: 21
Maximum System Gain dB 850: 24, 2300: 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 6
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 42 of 210
ComFlex Pro Low Power DAS (850+2100+2300)
Features
• A digitalized system to combine multiple services support band 850MHz, 2100MHz, and 2300MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (850/2100/2300).
• Two types of DPU: DPU with integrated Omni antenna, DPU with individual single band ports for
external antennas.
Functional Block Diagram
Page 43 of 210
Specifications
System
System 850/2100/2300 band 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 850 2100 2300
Operating Frequency, Uplink MHz 825-845 1920-1980 2302-2400
Operating Frequency, Downlink MHz 870-890 2110-2170 2302-2400
Operating Bandwidth Per Sub-band MHz Max 20 Max 60 Max 80
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 850: 17; 2100/2300: 21
Maximum System Gain dB 850: 24; 2100/2300: 28
Attenuation Adjustment Range(1dB step) dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna or external antenna(6 ports)
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU 6* SMA-Female (External antenna version)
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 44 of 210
Specifications
Mechanical---DAU
Dimensions, H x W x D mm 88 x 485 x 400
Weight (approx.) kg 13
Power Supply AC 100-240/50-60Hz
Power Consumption W 130
RF Connectors Cluster RF connector, simplex
Fiber Connectors LC/PC
Operating Temperature oC -10 to +45
Operating Humidity ≤ 85%
IP Level IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Mechanical---DRU
Dimensions, H x W x D
ODU mm
370 x 80 x 355
Per RFU 500 x 80 x 355
Weight (approx.) ODU
kg 12
Per RFU 15
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 220(per band)
RF Connectors 4.3-10, duplex per band
Fiber Connectors LC/PC
Operating Temperature oC -40 to +55
Operating Humidity ≤ 95%
IP Level IP65
Enclosure Cooling Convection
Installation Type Wall/ Pole
Page 45 of 210
ComFlex Pro Low Power DAS (700+900+1800+2600)
Features
• A digitalized system to combine multiple services support band 700MHz, 900MHz, 1800MHz, and
2600MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (700/900/1800/2600).
• Two types of DPU: DPU with integrated Omni antenna, DPU with individual single band ports for
external antennas.
Functional Block Diagram
Page 46 of 210
Specifications
System
System 700/900/1800/2600 band 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 700 900 1800 2600
Operating Frequency, Uplink MHz 703-748 890-915 1710-1785 2500-2570
Operating Frequency, Downlink MHz 758-803 935-960 1805-1880 2620-2690
Operating Bandwidth Per Sub-band MHz Max 45 Max 25 Max 75 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 700/900: 17; 1800/2600: 21
Maximum System Gain dB 700/900: 24; 1800/2600: 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna or external antenna(8 ports)
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU 8* SMA-Female (External antenna version)
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 47 of 210
ComFlex Pro Low Power DAS (900+1800+2100+2600)
Features
• A digitalized system to combine multiple services support band 900MHz, 1800MHz, 2100MHz and
2600MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (900/1800/2100/2600).
• Integrated Omni antenna.
Functional Block Diagram
Page 48 of 210
Specifications
System
System 900/1800/2100/2600 band 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 900 1800 2100 2600
Operating Frequency, UL MHz 885-915 1710-1785 1920-1980 2500-2570
Operating Frequency, DL MHz 930-960 1805-1880 2110-2170 2620-2690
Operating Bandwidth Per Sub-band MHz Max 30 Max 75 Max 60 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 900: 17, 1800/2100/2600: 21
Maximum System Gain, Downlink dB 900: 24, 1800/2100/2600: 28
Maximum System Gain, Uplink dB 40
Attenuation Adjustment Range(1dB step) dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Antenna Type Integrated Antenna
Antenna Gain dB 900: 2, 1800/2100/2600: 3
Impedance 50
ACU SE Return Loss dB TX/RX:≤ -20; TX, RX: ≤ -15
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 49 of 210
ComFlex Pro Low Power DAS (E900+1800+2100+2600)
Features
• A digitalized system to combine multiple services support band E900MHz, 1800MHz, 2100MHz and
2600MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (E900/1800/2100/2600).
• Integrated Omni antenna.
Functional Block Diagram
Page 50 of 210
Specifications
System
System E900/1800/2100/2600 band 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical E900 1800 2100 2600
Operating Frequency, UL MHz 880-915 1710-1785 1920-1980 2500-2570
Operating Frequency, DL MHz 925-960 1805-1880 2110-2170 2620-2690
Operating Bandwidth Per Sub-band MHz Max 35 Max 75 Max 60 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm E900: 17, 1800/2100/2600: 21
Maximum System Gain, Downlink dB E900: 24, 1800/2100/2600: 28
Maximum System Gain, Uplink dB 40
Attenuation Adjustment Range(1dB step) dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Antenna Type Integrated Antenna
Antenna Gain dB E900: 2, 1800/2100/2600: 3
Impedance 50
ACU SE Return Loss dB TX/RX:≤ -20; TX, RX: ≤ -15
Power, Mechanical & Environmental
Dimensions, H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption (approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 51 of 210
ComFlex Pro Low Power DAS (850+1900+EAWS+2600)
Features
• A digitalized system to combine multiple services support band 850MHz, 1900MHz, EAWS and
2600MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (850/1900/EAWS/2600).
• Two types of DPU: DPU with integrated Omni antenna, DPU with individual single band ports for external antennas.
Functional Block Diagram
Page 52 of 210
Specifications
System
System 850/1900/EAWS/2600 band 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 850 1900 EAWS 2600
Operating Frequency, Uplink MHz 824-849 1850-1910 1710-1780 2500-2570
Operating Frequency, Downlink
MHz 869-894 1930-1990 2110-2200 2620-2690
Operating Bandwidth Per Sub-band MHz Max 25 Max 60 Max 70 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 850/ 900: 17, 1900/EAWS/2600: 21
Maximum System Gain dB 850: 24, 1900/EAWS/2600: 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna or external antenna(8 ports)
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU 8* SMA-Female (External antenna version)
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 53 of 210
ComFlex Pro Low Power DAS (1900+EAWS+EAWS)
Features
• A digitalized system to combine multiple services support band 1900MHz and EAWS.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (1900), 4*4 MIMO (EAWS)
• Integrated Omni antenna.
Functional Block Diagram
Page 54 of 210
Specifications
System
System 1900 2T2R, EAWS 4T4R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 1900 EAWS
Operating Frequency, Uplink MHz 1850-1910 1710-1780
Operating Frequency, Downlink MHz 1930-1990 2110-2200
Instantaneous Bandwidth MHz Max 60 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 21
Maximum System Gain dB 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 55 of 210
ComFlex Pro Low Power DAS (1900+EAWS+2600+2600)
Features
• A digitalized system to combine multiple services support band 1900MHz, EAWS and 2600MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (1900/EAWS), 4*4 MIMO (2600)
• Integrated Omni antenna.
Functional Block Diagram
Page 56 of 210
Specifications
System
System 1900MHz, EAWS 2T2R, 2600MHz 4T4R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 1900 EAWS 2600
Operating Frequency, Uplink MHz 1850-1910 1710-1780 2500-2570
Operating Frequency, Downlink MHz 1930-1990 2110-2200 2620-2690
Instantaneous Bandwidth MHz Max 60 Max 45 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 21
Maximum System Gain dB 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 57 of 210
ComFlex Pro Low Power DAS (700+1800+2100+2600)
Features
• A digitalized system to combine multiple services support band 700MHz, 1800MHz, 2100MHz and
2600MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (700/1800/2100/2600).
• Integrated Omni antenna.
Functional Block Diagram
Page 58 of 210
Specifications
System
System 700MHz, 1800MHz, 2100MHz and 2600MHz 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 700 1800 2100 2600
Operating Frequency, Uplink MHz 703-748 1710-1785 1920-1980 2500-2570
Operating Frequency, Downlink MHz 758-803 1805-1880 2110-2170 2620-2690
Instantaneous Bandwidth MHz Max 45 Max 75 Max 60 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 700: 17, 1800/2100/2600: 21
Maximum System Gain dB 700: 24, 1800/2100/2600: 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 59 of 210
ComFlex Pro Low Power DAS (850+1800+2100+2600)
Features
• A digitalized system to combine multiple services support band 850MHz, 1800MHz, 2100MHz and
2600MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (850/1800/2100/2600).
• Integrated Omni antenna.
Functional Block Diagram
Page 60 of 210
Specifications
System
System 850MHz, 1800MHz, 2100MHz and 2600MHz 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 850 1800 2100 2600
Operating Frequency, Uplink MHz 824-849 1710-1785 1920-1980 2500-2570
Operating Frequency, Downlink MHz 869-894 1805-1880 2110-2170 2620-2690
Instantaneous Bandwidth MHz Max 25 Max 75 Max 60 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 850: 17, 1800/2100/2600: 21
Maximum System Gain dB 850: 24, 1800/2100/2600: 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 61 of 210
ComFlex Pro Low Power DAS (700+1900+EAWS+2600)
Features
• A digitalized system to combine multiple services support band 700MHz, 1900MHz, EAWS and
2600MHz.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported.(Optional)
• Integrated delay adjustment feature.
• Support Gigabit Ethernet.
• Built-in LTE modem for remote controlling and monitoring.
• Meet 3GPP standards.
• 2*2 MIMO (700/1900/EAWS/2600).
• Integrated Omni antenna.
Functional Block Diagram
Page 62 of 210
Specifications
System
System 700MHz, 1900MHz, EAWS and 2600MHz 2T2R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km;DEU-DEU:10km;DEU-DPU:0.3km
Data Rate Gb/s 12.5
Fiber Connectors LC/PC
Electrical 700 1900 EAWS 2600
Operating Frequency, Uplink MHz 703-748 1850-1910 1710-1780 2500-2570
Operating Frequency, Downlink MHz 758-803 1930-1990 2110-2200 2620-2690
Instantaneous Bandwidth MHz Max 45 Max 60 Max 70 Max 70
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 700: 17, 1900/EAWS/2600: 21
Maximum System Gain dB 700: 24, 1900/EAWS/2600: 28
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 10
System Group Delay sec 8
Spurious Emission dBm 3GPP TS 36.106
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x250x 250
Weight (approx.)
DAU
kg
13
DEU 8
DPU 3
Power Supply
DAU VAC
DC48 /AC100~240V
DEU AC100~240V
DPU VDC supplied by DEU/DC48V
Power Consumption
(approx.)
DAU
W
130
DEU 70
DPU 65
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 63 of 210
5G ComFlex Pro Low Power DAS (3.5GHz 200MHz)
Features
• A digitalized system to combine multiple services support band 3400MHz~3600MHz.
• Flexible distributed structure and expansion star connection and cascaded connection.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
• Integrated delay adjustment feature.
• Built-in Cellular modem for remote controlling and monitoring.
• Meet 3GPP NR standards.
• 4*4 MIMO integrated Omni antennas.
Functional Block Diagram
PRELIMINARY
Page 64 of 210
Specifications
System
System N78 band, 4T4R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km; DEU-DEU:10km; DEU-DPU:0.3km
Data Rate Gb/s 14.2
Fiber Connectors LC/PC
Electrical N78
Operating Frequency, Uplink MHz 3400-3600
Operating Frequency, Downlink MHz 3400-3600
Instantaneous Bandwidth MHz Max 200MHz for 4x4 MIMO
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 23dBm
Maximum System Gain dB 30
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 8
System Group Delay sec 3
Spurious Emission dBm 3GPP TS 38.104
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x 230 x 230 (approx.)
Weight (approx.)
DAU
kg
13
DEU 18
DPU 3.0
Power Supply
DAU VAC
DC 48 /AC 100~240V
DEU AC100~240V
DPU VDC Supplied by DEU/DC 48V
Power Consumption
(approx.)
DAU
W
130
DEU 65
DPU 60
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 65 of 210
5G ComFlex Pro Low Power DAS (3.5GHz-L 300MHz)
Features
• A digitalized system to combine multiple services support band 3300MHz~3600MHz.
• Flexible distributed structure and expansion star connection and cascaded connection.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
• Integrated delay adjustment feature.
• Built-in Cellular modem for remote controlling and monitoring.
• Meet 3GPP NR standards.
• 4*4 MIMO integrated Omni antennas.
Functional Block Diagram
PRELIMINARY
Page 66 of 210
Specifications
System
System N78 band, 4T4R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km; DEU-DEU:10km; DEU-DPU:0.3km
Data Rate Gb/s 14.2
Fiber Connectors LC/PC
Electrical N78
Operating Frequency, Uplink MHz 3300-3600
Operating Frequency, Downlink MHz 3300-3600
Instantaneous Bandwidth MHz Max 300MHz for 4x4 MIMO
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 23dBm
Maximum System Gain dB 30
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 8
System Group Delay sec 3
Spurious Emission dBm 3GPP TS 38.104
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x 230 x 230 (approx.)
Weight (approx.)
DAU
kg
13
DEU 18
DPU 3.0
Power Supply
DAU VAC
DC 48 /AC 100~240V
DEU AC100~240V
DPU VDC Supplied by DEU/DC 48V
Power Consumption
(approx.)
DAU
W
130
DEU 65
DPU 60
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 67 of 210
5G ComFlex Pro Low Power DAS (3.5GHz-U 300MHz)
Features
• A digitalized system to combine multiple services support band 3400MHz~3700MHz.
• Flexible distributed structure and expansion star connection and cascaded connection.
• Hybrid-fiber for DEU&DPU connection, remote power supply supported. (Optional)
• Integrated delay adjustment feature.
• Built-in Cellular modem for remote controlling and monitoring.
• Meet 3GPP NR standards.
• 4*4 MIMO integrated Omni antennas.
Functional Block Diagram
PRELIMINARY
Page 68 of 210
Specifications
System
System N78 band, 4T4R
Optical Fiber Single Mode
Optical Wavelength nm 1270/1330
Maximum Communication Distance km DAU-DEU: 10km; DEU-DEU:10km; DEU-DPU:0.3km
Data Rate Gb/s 14.2
Fiber Connectors LC/PC
Electrical N78
Operating Frequency, Uplink MHz 3400-3700
Operating Frequency, Downlink MHz 3400-3700
Instantaneous Bandwidth MHz Max 300MHz for 4x4 MIMO
Total Output Power, Uplink dBm -5
Total Output Power, Downlink dBm 23dBm
Maximum System Gain dB 30
Attenuation Adjustment Range (1dB step)
dB DAU: 0-30, DPU: 0-20
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 8
System Group Delay sec 3
Spurious Emission dBm 3GPP TS 38.104
Absolute Maximum RF Input Power dBm Uplink: -10dBm; Downlink: +10dBm;
Antenna Integrated Antenna
Impedance 50
Power, Mechanical & Environmental
Dimensions,
H x W x D (approx.)
DAU
mm
88 x 485 x 400
DEU 88 x 485 x 400
DPU 62 x 230 x 230 (approx.)
Weight (approx.)
DAU
kg
13
DEU 18
DPU 3.0
Power Supply
DAU VAC
DC 48 /AC 100~240V
DEU AC100~240V
DPU VDC Supplied by DEU/DC 48V
Power Consumption
(approx.)
DAU
W
130
DEU 65
DPU 60
RF Connectors
DAU Cluster RF connector, simplex
DEU /
DPU /
Operating Temperature
DAU
C
-10~+45
DEU -10~+45
DPU -10~+45
IP Level
DAU
IP30 DEU
DPU
Page 69 of 210
ComFlex DAS Series
Page 70 of 210
ComFlex DAS Series
ComFlex CM 20W
Features
• Modularized Master Unit and Remote Unit support field upgrade and independent gain control.
• RF module supports both simplex/duplex optional and adjusts gain for each module.
• Full operation bandwidth system supports multi-operator application.
• Supports all major technologies GSM, CDMA, WCDMA, and LTE.
• Comply with 3GPP and supports LTE MIMO.
• Optical link auto gain control.
• Web based GUI for intelligent commissioning and configuration.
• Supports FOU extension in Master Unit.
• RU supports PSU\PA\optical backup (conditional) and black optional.
Product Description
The ComFlex series Distributed Antenna System is an RF over fiber solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Master Unit (MU) and high power Remote Unit (RU). The MU includes the
Chassis, Power Supply Unit (PSU), Fibre Optical Unit (FOU) and RF Unit (RFU). With a modular design,
it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is designed with a
compact form factor for easy installation, and its modular design is easy for upgrading and maintenance,
which supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Functional Block Diagram
…
RU 1 RU 4BTS
MU
MIMO
…
RU 1 RU 8
BTS
SISO
MU
Page 71 of 210
Specifications
Optical
System 700MHz, 800MHz, 850MHz, 1800MHz, 1900MHz,
2100MHz,AWS,2600MHz
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Optical Output Power
Master Unit dBm
-4 to 2
Remote Unit 3.0to5.0
Optical Return Loss dB >50
Max. Optical Loss dB 6.5
Optical Automatic Gain Control dB 6.5
Fiber Connectors MU:SC/APC; RU:FC/APC
Maximum Remote Unit per Master Unit
8 (16 with FOU extension) in SISO; 4 (8 with FOU extension) in MIMO
Electrical
700 MHz
800 MHz*
850 MHz*
1800 MHz**
1900 MHz**
2100 MHz**
AWS** 2600 MHz
Uplink Frequency Range
MHz
703-748 806-824 824-849 1710-17
85
1850-19
10
1920-19
80
1710-175
5 2500-25
70
Downlink Frequency Range
758-803 851-869 869-894 1805-18
80
1930-19
90
2110-21
70
2110-215
5 2620-26
90
Operating Bandwidth
MHz 45 18 25 75 60 60 45 70
Uplink Output Power
dBm -30 -30 -30 -30 -30 -30 -30 -30
Downlink Output Power
dBm 43 43 43 43 43 43 43 43
Uplink Maximum gain
dB 30
Downlink Maximum gain
dB 35
ATT Adjustable Range(1dB step)
dB MU: 0-40, RU: 0-30
Pass Band Ripple (p-p)
dB ≤6 ≤5 ≤5 ≤6 ≤6 ≤6 ≤6 ≤6
Spurious emission
3GPP
TS
36.106
3GPP
TS
25.106
3GPP
TS
25.106
3GPP
TS
25.106
3GPP
TS
36.106
3GPP
TS
36.106
3GPP TS
25.106
3GPP TS 25.106
3GPP TS 36.106
3GPP TS
36.106
Uplink Noise Figure at Maximum Gain
dB ≤5
System Delay sec ≤2
VSWR ≤ 1.5
Max Downlink Input Power
dBm 30
* Note: When 800MHz and 850MHz used together the gain will be 3dB decrease in 800MHz DL and 850MHz UL, and 800MHz output power will be 40dBm and 850MHz NF will be 8dB.
** Note: 1800MHz, 1900MHz, 2100MHz and AWS band will not be used together due to frequency interference. Suggest 1800+2100 and 1900+AWS band.
Page 72 of 210
Specifications
Mechanical---MU
Dimensions, H x W x D
Chassis
mm
178 x 482 x 360
Fiber Optical Unit 37 x 185 x 299
Per RF Unit 103 x 46 x 259
Power Supply Unit 140 x 63 x 400
Weight (approx.)
Chassis
kg
12
Fiber Optical Unit 2
Per RF Unit 1
Power Supply Unit 2.5
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 85
RF Connectors N-Female
Fiber Connectors SC/APC
Operating Temperature °C 0 to +40
Operating Humidity ≤ 85%
Ingress protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Mechanical---RU
Dimensions, H x W x D
CMU
mm
528 x 298 x 251
Per RF Unit 528 x 290 x 152
Mounting Rack 602 x 820 x 80
Weight (approx.)
CMU
kg
25
Per RF Unit 15
Mounting Rack 8
Power Supply AC110/220V VAC 100-240/50-60Hz
Power Consumption (approx.) W 1200 (8 bands)
RF Connectors N-Female
Fiber Connectors FC/APC
Operating Temperature °C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Convection
Installation Type Wall
Page 73 of 210
ComFlex Series Distributed Antenna System
ComFlex AM
Features
• Low PIM to BTS (≤ -160dBc).
• ACU Cascade supported to share the monitoring.
• Max. DL input power of 100W per RFU of ACU.
• Modularized ACU and Remote Unit support field upgrade and
• independent gain control.
• ACU supports 8 operators duplex input.
• Full operation bandwidth system supports multi-operator application.
• Supports all major technologies GSM, CDMA, WCDMA and LTE.
• Web based GUI for intelligent commissioning and configuration.
• Supports OCU extension
• Remote Unit supports PSU/PA/optical backup (conditional) and black optional.
Product Description
The ComFlex series Distributed Antenna System is an RF over fibre solution that enhances a wireless
network’s coverage by extending cellular services from existing cell sites to an indoor environment. The
system consists of the Active Conditioning Unit (ACU), Optical control Unit (OCU), Combiner and
Remote Unit (RU). The ACU includes the Chassis, Power Supply Unit (PSU) and RF Unit (RFU). With a
modular design, it can support up to 8 independent RF inputs and 8 Remote Units. The Remote Unit is
designed with a compact form factor for easy installation, and its modular design is easy for upgrading
and maintenance, supports up to 8 bands including MIMO frequency.
This solution is an effective point-to-multipoint distributed antenna system that provides effective
coverage enhancement. The Comba DAS offers service providers an optimal solution for multiple
applications from a single building to a campus, mega mall, or sports arena and beyond.
Functional Block Diagram
…
RU1 RU4
BTSACU
OCU
Combiner
MIMO
…
RU 1 RU 8
BTS
ACU
OCU
Combiner
SISO
Page 74 of 210
Specifications
Optical
System 700MHz, 800MHz, 850MHz, 900MHz, 1800MHz, EAWS, 1900MHz,
2100MHz, 2600MHz and MIMO (max. 8 bands)
Optical Fiber Single Mode
Optical Wavelength nm 1310, 1550 + WDM
Optical Output Power
OCU dBm
-4 to -2
Remote Unit 3.0 to5.0
Optical Return Loss dB > 50
Max. Optical Loss dB 6.5
Optical Automatic Gain Control dB 6.5
Fiber Connectors OCU:SC/APC,RU:FC/APC
Maximum Remote Unit to OCU 8 (16 with FOU extension) in SISO, 4 (8 with FOU extension) in MIMO
Electrical
700MHz 700APAC 800MHz 850MHz 900MHz 1800MHz
Uplink Frequency Range
MHz
698-716/ 776-787
703-748 806-824 824-849 880-915 1710-1785
Downlink Frequency Range
728-746/ 746-757
758-803 851-869 869-894 925-960 1805-1880
Operating Bandwidth MHz 18/11 45 18 25 35 75
Downlink Output Power dBm 43 43 43 43 43 43
Uplink Maximum gain dB -3 -3 -3 -3 -3 -3
Downlink Maximum gain (@ 46dBm input)
dB -3 -3 -3 -3 -3 -3
ATT Adjustable Range (1dB step)
dB ACU: 0-70, RU: 0-30
Pass Band Ripple (p-p) dB ≤ 5 ≤ 6 ≤ 5 ≤ 5 ≤ 5 ≤ 6
Spurious emission 3GPP TS 36.106
3GPP TS 36.106
3GPP TS 36.106
3GPP TS 25.106
3GPP TS 36.106
3GPP TS 25.106
3GPP TS 36.106
Uplink Noise Figure at Maximum Gain
dB ≤ 5 ≤ 5 ≤ 5 ≤ 5 ≤ 5 ≤ 5
System Delay sec ≤ 2
VSWR ≤ 1.5
Max. Downlink Input Power per RFU of ACU
dBm 50
Electrical
EAWS 1900MHz 2100MHz 2600MHz
Uplink Frequency Range MHz
1710-1780 1850-1915 1920-1980 2500-257
Downlink Frequency Range 2110-2180 1930-1995 2110-2170 2620-2690
Operating Bandwidth MHz 70 65 60 70
Downlink Output Power dBm 43 43 43 43
Uplink Maximum gain dB -3 -3 -3 -3
Downlink Maximum gain (@ 46dBm input)
dB -3 -3 -3 -3
ATT Adjustable Range (1dB step)
dB ACU: 0-70, RU: 0-30
Pass Band Ripple (p-p) dB ≤ 6 ≤ 6 ≤ 6 ≤ 6
Spurious emission 3GPP TS 25.106 3GPP TS 25.106 3GPP TS 36.106
3GPP TS 25.106 3GPP TS 36.106
Uplink Noise Figure at Maximum Gain
dB ≤ 5 ≤ 5 ≤ 5 ≤ 5
System Delay sec ≤ 2
VSWR ≤ 1.5
Max. Downlink Input Power
per RFU of ACU dBm 50
Page 75 of 210
Specifications
Mechanical---ACU
Dimensions, H x W x D mm 220 x 482.5 x 450
Weight (approx.)
Rack
kg
15.5
Per RFU 4.5 (max. support 8 RF units)
PSU 2
MCU 1.5
Power Supply VAC 100-240/50-60Hz
VDC -48/47-63Hz
Power Consumption (approx.) W 180 (with 8 RFUs)
RF Connectors Input: Din, duplex; Output:QMA, simplex
Operating Temperature °C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Fan
Installation Type 19” Rack
Mechanical---Combiner
Dimensions, H x W x D mm 44 x 485x 450
Weight (approx.) kg 6.5
RF Connectors QMA-Female, simplex
Operating Temperature °C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Page 76 of 210
Specifications
Mechanical---OCU
Dimensions, H x W x D mm 44 x 485x 450
Weight (approx.) Rack
kg 5
Per FOU 2 (max. support 2FOUs)
Power Supply DC +28V (from ACU) @ 0.7A
Power Consumption (approx.) W 30
RF Connectors QMA-Female, simplex
Fiber Connectors SC/APC
Operating Temperature °C 0 to +45
Operating Humidity ≤ 85%
Ingress Protection IP30
Enclosure Cooling Convection
Installation Type 19” Rack
Mechanical---RU
Dimensions, H x W x D
CMU
mm
528 x 251 x 298
Per RF Unit 528 x 152 x 290(max. support 4 RF units)
Mounting Rack 602 x 820 x 30
Weight (approx.)
CMU
kg
30
Per RF Unit 20 (max. support 4 RF units)
Mounting Rack 8
Power Supply VAC 100-240/50-60Hz
Power Consumption (approx.) W 150 Per band (max. 1200)
RF Connectors N-Female, duplex
Fiber Connectors FC/APC
Operating Temperature °C -40 to +55
Operating Humidity ≤ 95%
Ingress protection IP65
Enclosure Cooling Convection
Installation Type Wall
Page 77 of 210
RX Series Digital Band Selective Repeater
Page 78 of 210
RX Series Digital Band Selective Repeater Features
• Up to 4 pass band segments with independent ON/OFF for maximum flexibility.
• 5W/10W total output power.
• Integrated wireless modem for remote configuration, monitoring and control.
• Offline isolation detection for easy commissioning.
• Internal backup battery keeps the alarm unit running for up to two hours after
power failure.
• Compatible to Comba generic OMT and CMS platform.
• Designed for all weather outdoor installation – waterproof, damp-proof and
omni-sealed (IP65).
• Can be configured as Master Unit (MU) or Slave Unit (SU) in a
centralizedmonitoring system.
FunctionalBlock Diagram
MobileAntDonor
Ant
Mobile
PowerSupply
AlarmIndicator Main Control Unit
ExternalPowerOMT
Li-ionBATT
Modem
DT MT
OMTComputer with
Data card
WirelessModem
OMC
BTS
Main Control UnitMain Control Unit
Integrated Frequency selective module
LNA1
PA2 LNA2
PA1
Operation andMaintenance
• Using a direct connection to a PC by RJ45, installation and commissioning of the system is
accomplished by the OMT. Using the integrated wireless modem, the equipment parameters can be
monitored and controlled remotely.
• Controlled equipment parameters include: RF Switch, Carrier Switch, Isolation Detection Switch,
Channel No. Range, ATT, Over-Temp Threshold, DL Input Power Threshold, DL Output Power
Threshold and Alarm Report Enable.
• Monitored equipment parameters include: Alarms (LNA, PA, PLL unlock, Power Down, PSU Fault,
Door Open, DL Input power Overload, DL Output Power Low, Over Temp, VSWR), DL Output Power
and DL Input Power.
• The system has been developed to take advantage of advanced network operation, where the CMS
(optional) provides an effective solution for central monitoring of a group of Comba products.
Page 79 of 210
Outline Drawing
MODEM
ALM
RUN
AC 100V-240V
50/60Hz AC OUT
RS-485 EXT_ALM MODEM ANT
MTDT
300
43
0
164
Page 80 of 210
LTE700Digital Band Selective Repeater
RX-0739
Specifications
Electrical 5W 10W
Frequency Range, Uplink MHz 703-733 or 718-748
FrequencyRange, Downlink MHz 758-788 or 773-803
Operating Bandwidth Per Sub-band MHz 3-20
Number of Sub-bands 4
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40
Maximum System Gain dB 90
GainAdjustmentRange (1dB step) dB 0-30
Pass Band Ripple, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out of Band Gain
Compliance with3GPP 36.106
ACRR
EVM
Out of Band Spectrum Emissions
Input Intermodulation
Output Intermodulation
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 160 170
Power Up Waiting Time(approx.) sec 180
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hrs ≥ 50,000
Note: Typical specifications at room temperature
Page 81 of 210
800MHz Tetra Band Selective Repeater
RX-8039
Specifications
Electrical 2W 5W 10W
Frequency Range, Uplink MHz 806-824
FrequencyRange, Downlink MHz 851-869
Operating Bandwidth Per Sub-band MHz 0.2-18
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 33 37 40
Maximum System Gain dB 90
GainAdjustmentRange (1dB step) dB 0-30
Pass Band Ripple, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Inter modulation dBc ≥40
Out-of-Band Suppression ±600kHz dBc ≥45
±1MHz dBc ≥ 60
Spurious 9KHz to 1GHz dBm -36
1GHz to 12.75GHz dBm -30
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 120 140 160
Power Up Waiting Time(approx.) sec 180
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Note: Typical specifications at room temperature
Page 82 of 210
850MHz Digital Band Selective Repeater
RX-8132
Specifications
Electrical 5W 10W
Operating Frequency, Uplink MHz 824-849
Operation Frequency, Downlink MHz 869-894
Operating Bandwidth Per Sub-band MHz 0.2-24.8
Number of Sub-bands 2
Total Output Power, Uplink dBm 33
Total Output Power, Downlink dBm 37 40
Maximum System Gain dB 90
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple, p-p dB ≤ 5
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6.5
Out-of-Band Rejection Offset ≥ 600KHz
dBc ≥ 45
Offset ≥ 1MHz ≥ 60
Intermodulation @ GSM dBc ≥ 40
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm/in 430x300x164/16.9x11.8x6.5
Weight (approx.) kg/lb 18/39.7
Power Supply VAC 100-240/47-63Hz
Power Consume W 140 160
Power Up Waiting Time (approx.) sec 180
MCU Battery Backup Time (approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +50
Operating Humidity 95%
Environmental Class IP65
MTBF hrs > 50,000
Note: Typical specification at room temperature .
Page 83 of 210
900MHz Digital Band Selective Repeater
RX-9139
Specifications
Electrical 5W 10W
Operating Frequency, Uplink MHz 880-910 or 885-915
Operation Frequency, Downlink MHz 925-950 or 930-960
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 37 40
Maximum System Gain dB 90
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple, p-p dB ≤ 5
Uplink Noise Figure dB 5
Out-of-Band Gain
Compliance with 3GPP TS 25.106
Intermodulation
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
System Group Delay sec ≤ 6.5
Out-of-Band Rejection Offset ≥ 600KHz
dBc ≥ 45
Offset ≥ 1MHz ≥ 60
Intermodulation @ GSM dBc ≥ 40
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight (approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consume W 140 160
Power Up Waiting Time (approx.) sec 180
MCU Battery Backup Time (approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +50
Operating Humidity 95%
Environmental Class IP65
MTBF hrs > 50,000
Note: Typical specification at room temperature .
Page 84 of 210
1800MHz Digital Band Selective Repeater
RX-1839
Specifications
Electrical 5W 10W
Frequency Range, Uplink MHz 1710-1785
FrequencyRange, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Instantaneous Bandwidth MHz 60
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain dB 90
GainAdjustmentRange (1dB step) dB 0-30
Pass Band Ripple, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out of Band Gain
Compliance withETSI EN 301 908-15*
ACRR
EVM
Out of Band Spectrum Emissions
Input Inter modulation
Output Inter modulation
Out-of-Band Rejection@ GSM ±600kHz
dBc ≥45
±1MHz ≥ 60
Inter modulation @ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 160 170
Power Up Waiting Time(approx.) sec 180
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hrs ≥ 50,000
Note: Typical specifications at room temperature *: Compliant to LTE standard @ UL 23dBm.
Page 85 of 210
1900MHz Digital Band Selective Repeater
RX-1939
Specifications
Electrical 5W 10W
Frequency Range, Uplink MHz 1850-1910
FrequencyRange, Downlink MHz 1930-1990
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain dB 90
GainAdjustmentRange (1dB step) dB 0-30
Pass Band Ripple, p-p dB 6
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out-of-Band Rejection ±600kHz dBc ≥ 45
±1MHz dBc ≥ 60
Spurious 9kHz-1GHz dBm -36
1GHz-12.75GHz dBm -30
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm/
in 430 x 300 x 164/16.9 x 11.8 x 6.5
Weight(approx.) kg/lb 18/39.7
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 150 160
Power Up Waiting Time(approx.) sec 180
MCU Battery Backup Time(approx.) hrs 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hrs ≥ 50,000
Note: Typical specifications at room temperature
Page 86 of 210
2100MHz Digital Band Selective Repeater
RX-2139
Specifications
Electrical 5W 10W 20W
Frequency Range, Uplink MHz 1920-1980
Frequency Range, Downlink MHz 2110-2170
Operating Bandwidth Per Sub-band MHz 3-20
Number of Sub-bands 4
Instantaneous Bandwidth MHz 30
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40 43
Maximum System Gain 90
Gain Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at 3.84MHz dB ≤ 2
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out-of-Band Gain
Compliance with 3GPP TS 25 106 Compliance with 3GPP TS 36 106
Inter modulation
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
Power Supply 100-240/47-63Hz
Power Consumption(approx.) W 150 160 180
Power Up Waiting Time(approx.) sec 180
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Note: Typical specifications at room temperature
Page 87 of 210
mBDA Series Digital Band Selective
Repeater
Page 88 of 210
Multi-band Digital Band Selective Repeater
Features
• 2 or 3 bands configuration in one system.
• Each band has up to 4 pass band segments with independent ON/OFF
for maximum flexibility.
• 5W/10W total output power for each band.
• Integrated wireless modem for remote configuration, monitoring and control.
• Offline isolation detection for easy commissioning.
• Internal backup battery keeps the alarm unit running for up to two hours after
power failure.
• Compatible to Comba generic OMT and CMS platform.
• Designed for all weather outdoor installation – waterproof, damp-proof and
omni-sealed (IP65).
FunctionalBlock Diagram
Donor Ant
Modem
OMT Computer with Data card
BTS
WirelessModem
OMC
PowerSupply
AlarmIndicator
Li-ionBATT
DL PA
UL PA UL LNA
DL LNA
Main Control Unit
OMT
DT MT
Mobile
PowerSupply
AlarmIndicator
Li-ionBATT
MobileAnt
DL PA
UL PA UL LNA
DL LNA
Main Control Unit
RS485
Digital Frequency
Selective Module
Digital Frequency
Selective Module
Page 89 of 210
Operation andMaintenance
• Using a direct connection to a PC by RJ45, installation and commissioning of the system is
accomplished by the OMT. Using the integrated wireless modem, the equipment parameters can be
monitored and controlled remotely.
• Controlled equipment parameters include: RF Switch, Carrier Switch, Isolation Detection Switch,
Channel No. Range, ATT, Over-Temp Threshold, DL Input Power Threshold, DLOutput Power
Threshold and Alarm Report Enable.
• Monitored equipment parameters include:Alarms (LNA, PA, PLL unlock, Power Down, PSU Fault,
Door Open, DL Input power Overload, DL Output Power Low, Over Temp, VSWR), DL Output Power
and DL Input Power.
• The RX-system has been developed to take advantage of advanced network operation, where the
CMS (optional) provides an effective solution for central monitoring of a group of Comba products.
Outline Drawing
40
8
440 355
Dual band
433
645
Page 90 of 210
Tri-band
Page 91 of 210
850MHz + 1900MHzDigital Band Selective Repeater
RX-7137
Specifications-850MHz
Specifications-1900MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 824-849
FrequencyRange, Downlink MHz 869-894
Operating Bandwidth Per Sub-band MHz 0.2-24.8
Number of Sub-bands 2
Total Output Power, Uplink dBm 33
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out-of-Band Rejection@ GSM
±600kHz dB ≥ 45
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature
Electrical 5W 10W
Frequency Range, Uplink MHz 1850-1910
FrequencyRange, Downlink MHz 1930-1990
Operating Bandwidth Per Sub-band 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Pass Band Ripple, p-p dB 6
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out-of-Band Rejection@ GSM
±600kHz dB ≥ 45
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature
Page 92 of 210
Specifications
Mechanical 5W 10W
Dimensions, H x W x D mm/In 440x408x355/17.3x16x14
Weight (approx.) kg/lb 45/99.2
Power Supply 100-240/47-63Hz
Power Consumption (approx.) W 290 320
Power Up Waiting Time (approx.) sec 180
MCU Battery Backup Time (approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Page 93 of 210
900MHz + 1800MHzDigital Band Selective Repeater
RX-7539
Specifications-900MHz
Specifications-1800MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 880-910 or 885-915
FrequencyRange, Downlink MHz 925-955 or 930-960
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out-of-Band Rejection@ GSM
±600kHz dB ≥ 45
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature
Electrical 5W 10W
Frequency Range, Uplink MHz 1710-1785
Frequency Range, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Instantaneous Bandwidth MHz 60
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
Compliance with ETSI EN 301 908-15* EVM
Out of Band Gain
Out-of-Band Rejection@ GSM
±600kHz dB ≥ 45
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature, *: Compliant to LTE standard @ UL 23dBm.
Page 94 of 210
Specifications
Mechanical 5W 10W
Dimensions, H x W x D mm 440×408×355
Weight (approx.) kg 45
Power Supply 100-240/47-63Hz
Power Consumption (approx.) W 300 330
Power Up Waiting Time (approx.) sec 180
MCU Battery Backup Time (approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Page 95 of 210
900MHz + 2100MHzDigital Band Selective Repeater
RX-7639
Specifications-900MHz
Specifications-2100MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1920-1980
FrequencyRange, Downlink MHz 2110-2170
Operating Bandwidth Per Sub-band 3-20*
Number of Sub-bands 4
Instantaneous Bandwidth MHz 30
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
Compliance with 3GPP TS 25 106 Compliance with 3GPP TS 36 106
EVM
Out-of-Band Gain
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature *: UMTS max bandwidth is 15MHz, LTE max bandwidth is 20MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 880-910 or 885-915
FrequencyRange, Downlink MHz 925-950 or 930-960
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out-of-Band Rejection@ GSM
±600kHz dB ≥ 45
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature
Page 96 of 210
Specifications
Mechanical 5W 10W
Dimensions, H x W x D mm 440×408×355
Weight (approx.) kg 45
Power Supply 100-240/47-63Hz
Power Consumption (approx.) W 290 320
Power Up Waiting Time (approx.) sec 180
MCU Battery Backup Time (approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Page 97 of 210
1800MHz + 2100MHzDigital Band Selective Repeater
RX-7839
Specifications-1800MHz
Specifications-2100MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1920-1980
FrequencyRange, Downlink MHz 2110-2170
Operating Bandwidth Per Sub-band 3-20*
Number of Sub-bands 4
Instantaneous Bandwidth MHz 30
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
Compliance with 3GPP TS 25 106 Compliance with 3GPP TS 36 106
EVM
Out-of-Band Gain
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature *: UMTS max bandwidth is 15MHz, LTE max bandwidth is 20MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1710-1785
Frequency Range, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Instantaneous Bandwidth MHz 60
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
Compliance with ETSI EN 301 908-15* EVM
Out of Band Gain
Out-of-Band Rejection@ GSM
±600kHz dB ≥ 45
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature, *: Compliant to LTE standard @ UL 23dBm.
Page 98 of 210
Specifications
Mechanical 5W 10W
Dimensions, H x W x D mm 440×408×355
Weight (approx.) kg 45
Power Supply 100-240/47-63Hz
Power Consumption (approx.) W 310 330
MCU Battery Backup Time (approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Page 99 of 210
Tri-Band Digital Band Selective Repeater
RX-5239
Specifications-900MHz
Specifications-1800MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 880-910 or 885-915
FrequencyRange, Downlink MHz 925-955 or 930-960
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Out-of-Band Rejection@ GSM
±600kHz dB ≥ 45
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature
Electrical 5W 10W
Frequency Range, Uplink MHz 1710-1785
Frequency Range, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25
Number of Sub-bands 4
Instantaneous Bandwidth MHz 60
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB 5
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
Compliance with ETSI EN 301 908-15* EVM
Out of Band Gain
Out-of-Band Rejection@ GSM
±600kHz dB ≥ 45
±1MHz dB ≥ 60
Intermodulation@ GSM dBc ≥ 40
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature, *: Compliant to LTE standard @ UL 23dBm.
Page 100 of 210
Specifications-2100MHz
Electrical 5W 10W
Frequency Range, Uplink MHz 1920-1980
FrequencyRange, Downlink MHz 2110-2170
Operating Bandwidth Per Sub-band 3-20*
Number of Sub-bands 4
Instantaneous Bandwidth MHz 30
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40
Maximum System Gain 90
Gain AdjustmentRange (1dB step) dB 0-30
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spurious Emission Mask
Compliance with 3GPP TS 25 106 Compliance with 3GPP TS 36 106
EVM
Out-of-Band Gain
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
Impedance 50
Note: Typical specifications at room temperature *: UMTS max bandwidth is 15MHz, LTE max bandwidth is 20MHz
Specifications
Mechanical 5W 10W
Dimensions, H x W x D mm 440×408×355
Weight (approx.) kg 45
Power Supply 100-240/47-63Hz
Power Consumption (approx.) W 420 480
Power Up Waiting Time (approx.) sec 180
MCU Battery Backup Time (approx.) hr 2
Enclosure Cooling Convection
RF Connectors Equipment N-Female
Combiner (Optional) Din-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Page 101 of 210
Digital Channel Selective Repeater-LTE
Features
• Support 5/10/15/20MHz different bandwidth LTE carrier
• Power Output software adjustable, up to20W Downlink Power Output.
• Automatic Digital gain control and Antenna Feedback Cancellation (AFC)
feature that can reduce the isolation requirement up to 30dB.
• Integrated WCDMA wireless modem for remote configuration, monitoring and
control.
• Isolation detection for easy commissioning.
• Compatible to Comba generic OMT and CMS platform.
• Designed for all weather outdoor installation – waterproof, damp-proof and
omni-sealed (IP65).
Functional Block Diagram
MobileAntDonor
Ant
Mobile
PowerSupply
AlarmIndicator Main Control Unit
ExternalPowerOMT
Li-ionBATT
Modem
DT MT
OMTComputer with
Data card
WirelessModem
OMC
BTS
Main Control UnitMain Control Unit
Integrated Frequency selective module
LNA1
PA2 LNA2
PA1
Operation andMaintenance
• Using a direct connection to a PC by RJ45, installation and commissioning of the system is
accomplished by the OMT. Using the integrated wireless modem, the equipment parameters can be
monitored and controlled remotely.
• Controlled equipment parameters include: RF Switch, Carrier Switch, Isolation Detection Switch,
Channel No. Range, ATT, Over-Temp Threshold, DL Input Power Threshold, DL Output Power
Threshold and Alarm Report Enable.
• Monitored equipment parameters include: Alarms (LNA, PA, PLL unlock, Power Down, PSU Fault,
Door Open, DL Input power Overload, DL Output Power Low, Over Temp, VSWR), DL Output Power
and DL Input Power.
• The system has been developed to take advantage of advanced network operation, where the CMS
(optional) provides an effective solution for central monitoring of a group of Comba products.
Page 102 of 210
Outline Drawing
MODEM
ALM
RUN
AC 100V-240V
50/60Hz AC OUT
RS-485 EXT_ALM MODEM ANT
MTDT
300
43
0
164
Page 103 of 210
800MHz Digital Channel Selective Repeater
RX-0823
Specifications
Electrical 5W 10W 20W
Frequency Range, Uplink MHz 832-862
Frequency Range, Downlink MHz 791-821
Operating Bandwidth MHz 5/10/15/20 (5MHz Step)
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40 43
Maximum System Gain dB 100
Gain Adjustment Range (1dB step) dB 0-30
Antenna Feedback Cancellation dB 30
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spectrum Emission Mask
Compliance with 3GPP TS 36.106
ACRR
EVM
PCDE
Inter modulation
Absolute Maximum RF Input Power
dBm -10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 130 140 150
Power Up Waiting Time(approx.) sec 180
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥ 50,000
Note: Typical specification at room temperature
Page 104 of 210
2600MHz Digital Channel Selective Repeater
RX-2623
Specifications
Electrical 5W 10W 20W
Frequency Range, Uplink MHz 2500-2570
Frequency Range, Downlink MHz 2620-2690
Operating Bandwidth MHz 5/10/15/20
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 37 40 43
Maximum System Gain dB 100
Gain Adjustment Range (1dB step) dB 0-30
Antenna Feedback Cancellation dB Gain -10
Uplink Noise Figure dB 5
System Group Delay sec 6.5
Spectrum Emission Mask
Compliance with 3GPP TS 36.106
ACRR
EVM
PCDE
Inter modulation
Absolute Maximum RF Input Power dBm -10
Input VSWR 1.5
LTE Modem
GSM/GPRS/EDGE: 900/1800 MHz;
WCDMA: 900/1800/2100 MHz; FDD LTE: 800/900/1800/2100/2600 MHz;
Impedance 50
Mechanical
Dimensions, H x W x D mm 430 x 300 x 164
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 140 150 160
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF* hr ≥50,000
Note: Typical specification at room temperature
Page 105 of 210
Digital Channel Selective Repeater-WCDMA/LTE
Features
• Support 5/10/15/20MHz different bandwidth WCDMA/LTE carrier
• Utilizing the latest Pre-distortion MCPA technologies, up to 20W Downlink Power
Output.
• Automatic Digital gain control and Antenna Feedback Cancellation (AFC)
feature
• Integrated Wireless modem for remote configuration, monitoring and control.
• Real time Isolation detection for easy commissioning.
• Compatible to Comba generic OMT and CMS platform.
• Designed for all weather outdoor installation – waterproof, damp-proof and
omni-sealed (IP65).
Functional Block Diagram
MobileAntDonor
Ant
Mobile
PowerSupply
AlarmIndicator Main Control Unit
ExternalPowerOMT
Li-ionBATT
Modem
DT MT
OMTComputer with
Data card
WirelessModem
OMC
BTS
Main Control UnitMain Control Unit
Integrated Frequency selective module
LNA1
PA2 LNA2
PA1
Page 106 of 210
900MHz Digital Channel Selective Repeater
RX-9123 V5
Specifications
Electrical
Frequency Range, Uplink MHz 880-915
Frequency Range, Downlink MHz 925-960
Operating Bandwidth MHz 5/10/15/20
Number of Sub-bands 2
Instantaneous bandwidth MHz 35
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 43
Maximum System Gain dB 95
Gain Adjustment Range (1dB step) dB 0-30, support AGC
Antenna Feedback Cancellation dB Gain - 5
Uplink Noise Figure dB 5
System Group Delay sec 10
Spectrum Emission Mask
Compliance with 3GPP TS 36.106
ACRR
EVM
PCDE
Intermodulation
Absolute Maximum RF Input Power dBm +10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 500 x 356 x 140
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 130
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors 4.3-10
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥50,000
Note: Typical specification at room temperature
Page 107 of 210
1800MHz Digital Channel Selective Repeater
RX-1823 III3
Specifications
Electrical
Frequency Range, Uplink MHz 1710-1785
Frequency Range, Downlink MHz 1805-1880
Operating Bandwidth MHz 5/10/15/20
Number of Sub-bands 2
Instantaneous bandwidth MHz 40
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 43
Maximum System Gain dB 95
Gain Adjustment Range (1dB step) dB 0-30
Antenna Feedback Cancellation dB Gain - 5
Uplink Noise Figure dB 5
System Group Delay sec 10
Spectrum Emission Mask
Compliance with 3GPP TS 36.106
ACRR
EVM
PCDE
Intermodulation
Absolute Maximum RF Input Power dBm +10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 500 x 356 x 140
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 130
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors 4.3-10
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥50,000
Note: Typical specification at room temperature
Page 108 of 210
2100MHz Digital Channel Selective Repeater
RX-2123 V5
Specifications
Electrical
Frequency Range, Uplink MHz 1920-1980
Frequency Range, Downlink MHz 2110-2170
Operating Bandwidth MHz 5/10/15/20
Number of Sub-bands 2
Instantaneous bandwidth MHz 40
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 43
Maximum System Gain dB 95
Gain Adjustment Range (1dB step) dB 0-30, support AGC
Antenna Feedback Cancellation dB Gain - 5
Uplink Noise Figure dB 5
System Group Delay sec 10
Spectrum Emission Mask
Compliance with 3GPP TS 36.106
ACRR
EVM
PCDE
Intermodulation
Absolute Maximum RF Input Power dBm +10
Input VSWR 1.5
Impedance 50
Mechanical
Dimensions, H x W x D mm 500 x 356 x 140
Weight(approx.) kg 18
Power Supply VAC 100-240/47-63Hz
Power Consumption(approx.) W 130
MCU Battery Backup Time(approx.) hr 2
Enclosure Cooling Convection
RF Connectors 4.3-10
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr ≥50,000
Note: Typical specification at room temperature
Page 109 of 210
mBDA Series Digital Band Selective
Repeater
Page 110 of 210
mBDA Series Digital Band Selective Repeater
Features
• Up to 3 or 4 pass band segments with independent ON/OFF for maximum
flexibility.
• Supports Cellular Communication and NB-IoT(Stand Alone, Guard Band or
In-band)
• Max. 2W total output power.
• Offline isolation detection for easy commissioning.
• Friendly and easy OMT interface via RJ45 connection
• Integrated wireless modem for remote monitoring and control.
• Compatible to Comba generic OMT and CMS platform.
• Waterproof, damp-proof and omni-sealed (IP65).
Functional Block Diagram
MobileAntDonor
Ant
Mobile
PowerSupply
AlarmIndicator Main Control Unit
ExternalPowerOMT
Li-ionBATT
Modem
DT MT
WirelessModem
OMC
BTS
Main Control UnitMain Control Unit
Integrated Frequency selective module
LNA1
PA2 LNA2
PA1
Page 111 of 210
700MHz Digital Band Selective Repeater
mBDA-0733
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 703-733
Operation Frequency, Downlink MHz 758-788
Operating Bandwidth Per Sub-band MHz 3-20
Number of Sub-bands 3
Total Output Power, Uplink dBm 17
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB ≤ 4
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6
Out-of-Band Gain
Compliance with 3GPP TS 36.106
Input Inter modulation
Spurious Emission
EVM
ACRR
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm 350 x 220 x 100
Weight (approx.) kg 7
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr >50,000
Note: Typical specification at room temperature.
Page 112 of 210
800MHz Digital Band Selective Repeater
mBDA-0833
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 832-862
Operation Frequency, Downlink MHz 791-821
Operating Bandwidth Per Sub-band MHz 0.2-20
Number of Sub-bands 4
Total Output Power, Uplink dBm 17
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB ≤ 4
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6
Out-of-Band Gain
Compliance with 3GPP TS 36.106
Intermodulation
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm/in 361x222x93 / 14.2x8.7x3.7
Weight (approx.) kg/lb 7 / 15.4
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hrs >50,000
Note: Typical specification at room temperature;
Page 113 of 210
850MHz Digital Band Selective Repeater
mBDA-8133
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 824-849
Operation Frequency, Downlink MHz 869-894
Operating Bandwidth Per Sub-band MHz 0.2-25*
Number of Sub-bands 3
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB ≤ 4
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6
Out-of-Band Gain
Compliance with 3GPP TS 25.106 @ WCDMA Compliance with 3GPP TS 36.106 @ LTE
Intermodulation
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
Out-of-Band Rejection@ GSM
Offset ≥ 600KHz dBc
≥ 45
Offset ≥ 1MHz ≥ 60
Intermodulation @ GSM dBm ≤ -13
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm/in 361x222x93 / 14.2x8.7x3.7
Weight (approx.) kg/lb 7 / 15.4
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hrs >50,000
Note: Typical specification at room temperature; *:GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Page 114 of 210
900MHz Digital Band Selective Repeater
mBDA-9133
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 880-915
Operation Frequency, Downlink MHz 925-960
Operating Bandwidth Per Sub-band MHz 0.2-25*
Number of Sub-bands 4
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB ≤ 4
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6.5
Out-of-Band Gain
Compliance with 3GPP TS 25.106 @ WCDMA Compliance with 3GPP TS 36.106 @ LTE
Intermodulation
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
Out-of-Band Rejection@ GSM
Offset ≥ 600KHz dBc
≥ 45
Offset ≥ 1MHz ≥ 60
Inter modulation @ GSM dBm ≤ -13
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm/in 361x222x 93/14.2x8.7x3.7
Weight (approx.) kg/lb 7/15.4
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr >50,000
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz.
Page 115 of 210
1800MHz Digital Band Selective Repeater
mBDA-1833
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 1710-1785
Operation Frequency, Downlink MHz 1805-1880
Operating Bandwidth Per Sub-band MHz 0.2-25*
Number of Sub-bands 4
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB ≤ 4
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6
Out-of-Band Gain
Compliance with 3GPP TS 36.106
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
Intermodulation
Out-of-Band Rejection@ GSM
Offset ≥ 600KHz dBc
≥ 45
Offset ≥ 1MHz ≥ 60
Inter modulation @ GSM dBm ≤ -13
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm/in 361x222x93/14.2x8.7x3.7
Weight (approx.) kg/lb 7/15.4
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr >50,000
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, LTE Max. Bandwidth 20MHz.
Page 116 of 210
1900MHz Digital Band Selective Repeater
mBDA-1933
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 1850-1915
Operation Frequency, Downlink MHz 1930-1995
Operating Bandwidth Per Sub-band MHz 0.2-25*
Number of Sub-bands 3
Total Output Power, Uplink dBm 23
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB ≤ 4
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6
Out-of-Band Gain
Compliance with 3GPP TS 25.106 @ WCDMA Compliance with 3GPP TS 36.106 @ LTE
Intermodulation
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
Out-of-Band Rejection@ GSM
Offset ≥ 600KHz dBc
≥ 45
Offset ≥ 1MHz ≥ 60
Inter modulation @ GSM dBm ≤ -13
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm/in 361 x 222 x 93/14.2 x 8.7 x 3.7
Weight (approx.) kg/lb 7/15.4
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr >50,000
Note: Typical specification at room temperature; *: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Page 117 of 210
AWS Digital Band Selective Repeater
mBDA-2033
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 1710-1755
Operation Frequency, Downlink MHz 2110-2155
Operating Bandwidth Per Sub-band MHz 3-20*
Number of Sub-bands 3
Total Output Power, Uplink dBm 17
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at 3.84MHz dB ≤ 2
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6
Out-of-Band Gain
Compliance with 3GPP TS 25.106 @ WCDMA Compliance with 3GPP TS 36.106 @ LTE
Inter modulation
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm/in 361 x 222 x 93/14.2 x 8.7 x 3.7
Weight (approx.) kg/lb 7/15.4
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr >50,000
Note: Typical specification at room temperature; *: WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Page 118 of 210
2100MHzDigital Band Selective Repeater
mBDA-2133
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 1920-1980
Operation Frequency, Downlink MHz 2110-2170
Operating Bandwidth Per Sub-band MHz 0.2-20*
Number of Sub-bands 4
Total Output Power, Uplink dBm 17
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at 3.84MHz dB ≤ 2
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6
Out-of-Band Gain
Compliance with 3GPP TS 25.106 @ WCDMA Compliance with 3GPP TS 36.106 @ LTE
Inter modulation
Spurious Emission
EVM
ACRR
PCDE
Spurious Emission Mask
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm/in 361 x 222 x 93/14.2 x 8.7 x 3.7
Weight (approx.) kg/lb 7/15.4
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr >50,000
Note: Typical specification at room temperature; *: WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
Page 119 of 210
2600MHzDigital Band Selective Repeater
mBDA-2633
Specifications
Electrical 0.5W 1W 2W
Operating Frequency, Uplink MHz 2500-2570
Operation Frequency, Downlink MHz 2620-2690
Operating Bandwidth Per Sub-band MHz 3-20
Number of Sub-bands 4
Total Output Power, Uplink dBm 17
Total Output Power, Downlink dBm 27 30 33
Maximum System Gain dB 80
Attenuation Adjustment Range (1dB step) dB 0-30
Pass Band Ripple at FBW, p-p dB ≤ 4
Uplink Noise Figure dB 5
System Group Delay sec ≤ 6
Out-of-Band Gain
Compliance with 3GPP TS 36.106
Input Inter modulation
Spurious Emission
EVM
ACRR
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 1.6
Impedance 50
Mechanical
Dimensions, W x H x D mm/in 361 x 222 x 93/14.2 x 8.7 x 3.7
Weight (approx.) kg/lb 7/15.4
Power Supply VAC 100-240/47-63Hz
Power Consumption (approx.) W 60
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature C -33 to +55
Operating Humidity 95%
Environmental Class IP65
MTBF hr >50,000
Note: Typical specification at room temperature.
Page 120 of 210
Combiner for Dual Single Band mBDAs
Features
• Combiner is used for mBDA single band enclosure
• Single in and single out
• Uniform for the whole system
• Easy installation
Specifications-model 1
Electrical Band1 Band2
Operating Frequency (MHz) 806-960 1710-2170
Insert Loss (dB) ≤ 0.8 ≤ 1
VSWR ≤ 1.5 ≤ 1.5
Note: Typical specification at room temperature;
Specifications-model 2
Electrical Band1 Band2
Operating Frequency (MHz) 1710-1880 1920-2170
Insert Loss (dB) ≤ 1.1 ≤ 1.1
VSWR ≤ 1.5 ≤ 1.5
Note: Typical specification at room temperature;
Mechanical
Dimensions, H x W x D (mm) 210 x 338 x 71
Weight (approx.) (kg) 4.6
RF Connectors N-Female
Operating Temperature (C) -33 to +55
Operating Humidity 95%
Environmental Class IP65
Outline Drawing
21
0
33871
102
Combiner
Page 121 of 210
Wall
Master Unit
Slave Unit
Combiner
Final Show-After Combination
Note: mBDA equipments are not included, need order separately.
Page 122 of 210
mBDA Indoor Digital Band Selective Repeater
mBDA-100
Features
• Max. 5 bands of 700/800/900/1800/2100/2600MHz.
• Supports GSM, WCDMA, and LTE operating.
• Supports multi operator configurations and up to 3 or 4 sub bands per band.
• Operation via OMT software.
• Friendly and easy OMT interface via RJ45 connection
• Integrated wireless modem or Ethernet for remote monitoring and control.
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC or wireless modem to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz LTE 703-733 758-788
800MHz LTE 791-821 832-862
900MHz GSM/WCDMA 930-960 885-915
1800MHz GSM/LTE 1805-1880 1710-1785
2100MHz WCDMA 2110-2170 1920-1980
2600MHz LTE 2620-2690 2500-2570
WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
RF Parameter
LTE 700 MHz
RF Parameter DL UL
Frequency Range (MHz) 703-733 758-788
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
Page 123 of 210
LTE 700 MHz
RF Parameter DL UL
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
LTE 800 MHz
RF Parameter DL UL
Frequency Range (MHz) 791-821 832-862
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
GSM/WCDMA*/LTE** 900 MHz
RF Parameter DL UL
Frequency Range (MHz) 930-960 885-915
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 23
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 0.2-24.8 0.2-24.8
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation1 3GPP 3GPP
Page 124 of 210
GSM/LTE** 1800 MHz
RF Parameter DL UL
Frequency Range (MHz) 1805-1880 1710-1785
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 23
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 0.2-25 0.2-25
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation2 3GPP 3GPP
*WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask. **LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12)
1Intermodulation: WCDMA@3GPP; GSM @Less than-13dBm. 2Intermodulation: LTE@3GPP; GSM @Less than-13dBm.
WCDMA/LTE 2100 MHz
RF Parameter DL UL
Frequency Range (MHz) 2110-2170 1920-1980
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 4 4
Operating Bandwidth (MHz) 5,10,15 5,10,15
Maximum System Gain (dB) 80 80
Pass Band Ripple at 3.84MHz 2 2
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
LTE 2600 MHz
RF Parameter DL UL
Frequency Range (MHz) 2620-2690 2500-2570
Max Output Power Per Antenna Port 1(Composite)
27, 30, 33
17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 4 4
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
Page 125 of 210
LTE 2600 MHz
RF Parameter DL UL
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
Combiner Specifications
Electrical Band1 Band2 Band3 Band4
Operating Frequency (MHz) 791-960 1710-1880 1920-2170 2500-2690
Insert Loss (dB) ≤ 0.8 ≤ 0.9 ≤ 0.9 ≤ 0.8
VSWR ≤ 1.5 ≤ 1.5 ≤ 1.5 ≤ 1.5
Mechanical Specifications
Dimensions, H x W x D, mm (in)
System Rack (4 bands) 267 x 482 x 485, (10.5 x 19 x 19.1)
Power and Monitor Unit 220 x 80 x 440, (8.7 x 3.1 x 17.3)
Combiner Unit 220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit 220 x 60 x 350, (8.7 x 2.4 x 13.8)
Weight, kg (lb) (approx.)
System Rack (4 bands) 13.2, (29.1)
Power & Monitoring Unit 4, (8.8)
Combiner Unit 4, (8.8)
RF Card 3.8, (8.4)
Power Consumption, W (approx.) Power & Monitoring Unit 15
RF Unit 50
Power Supply 100-240VAC/47-63Hz
Power Up Waiting Time (sec) (approx.) 180
Enclosure Cooling Convection or Fan
RF Connectors N Female
Operating Temperature (°C ) -20 to +40
Operating Humidity 10% to 85%
Environmental Class IP30
MTBF ( hr) ≥ 50,000
Mounting 19” Rack
Page 126 of 210
BDA Indoor Digital Band Selective Repeater
mBDA-200S
Features
• Max. 6 bands of
700UpperC/700LowerABC/800/850/1900/AWS/EAWS/2600MHz.
• Supports GSM, CDMA, WCDMA, and LTE operating.
• Supports multi operator configurations and up to 3 sub bands per band.
• Operation via WEB based OMT software.
• Friendly and easy OMT interface via RJ45 connection.
• Support Ethernet for remote monitoring and control.
Product Description
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz Upper C LTE 746-757 776-787
700MHz Lower ABC LTE 728-746 698-716
800MHz (ESMR) CDMA/LTE 862-869 817-824
850MHz GSM/CDMA/WCDMA/LTE 869-894 824-849
1900MHz GSMCDMA/WCDMA/LTE 1930-1995 1850-1915
EAWS WCDMA/LTE 2110-2180 1710-1780
2600MHz LTE 2620-2690 2500-2570
RF Parameters
LTE700MHz Upper C
RF Parameter DL UL
Frequency Range (MHz) 746-757 776-787
Max Output Power Per Antenna Port
1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 1 1
Operating Bandwidth (MHz) 5-11 5-11
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
Page 127 of 210
LTE700MHz Upper C
RF Parameter DL UL
System Noise Figure (dB) / 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation1 3GPP 3GPP
LTE700MHz Lower ABC
RF Parameter DL UL
Frequency Range (MHz) 728-746 698-716
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 5-18 5-18
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation2 3GPP 3GPP
CDMA/LTE 800 MHz (ESMR)
RF Parameter DL UL
Frequency Range (MHz) 862-869 817-824
Max Output Power Per Antenna Port
1(Composite) 27,30,33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 0.2-10 0.2-10
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) 8 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation1 3GPP 3GPP
Page 128 of 210
GSM/CDMA/WCDMA/LTE 850 MHz
RF Parameter DL UL
Frequency Range (MHz) 869-894 824-849
Max Output Power Per Antenna Port
1(Composite) 27, 30, 33 23
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 0.2-24.8 0.2-24.8
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation1 3GPP 3GPP
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
*WCDMA is based on 3GPP TS 25.106 V9.0.0 (2009-12).
**LTE service is based on 3GPP TS 36.106 V9.0.0 (2009-12) 1Intermodulation: WCDMA@3GPP; GSM/CDMA@Less than-13dBm.
2Intermodulation: LTE@3GPP; GSM @Less than-13dBm.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
RF Parameters
GSM/CDMA/WCDMA/LTE 1900 MHz
RF Parameter DL UL
Frequency Range (MHz) 1930-1995 1850-1915
Max Output Power Per Antenna Port
1(Composite) 27, 30, 33 23
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 0.2-25 0.2-25
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation1 3GPP 3GPP
Page 129 of 210
WCDMA/LTE EAWS
RF Parameter DL UL
Frequency Range (MHz) 2110-2180 1710-1780
Max Output Power Per Antenna Port
1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 5-20 5-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
LTE 2600 MHz
RF Parameter DL UL
Frequency Range (MHz) 2620-2690 2500-2570
Max Output Power Per Antenna Port
1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 5-20 5-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (usec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
Note:
Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.0dB.
Page 130 of 210
MechanicalSpecifications
Dimensions, H x W x D, mm (in)
System Rack (4 bands) 267 x 482 x 485, (10.5 x 19 x 19.1)
Power Unit 220 x 80 x 440, (8.7 x 3.1 x 17.3)
Combiner Unit 220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit 220 x 60 x 350, (8.7 x 2.4 x 13.8)
Weight, kg (lb) (approx.)
System Rack (4 bands) 13.2, (29.1)
Power and Monitor Unit 4, (8.8)
Combiner Unit 4, (8.8)
RF Card 3.8, (8.4)
Power Consumption, W (approx.) Power and Monitor Unit 15
RF Unit 50
Power Supply 100-240VAC/47-63Hz
Power Up Waiting Time (sec) (approx.) 180
Enclosure Cooling Convection or Fan
RF Connectors 700UpperC/700LowerABC/800/850/1900/EAWS (4.3-10)
2600MHz (N-Female)
Operating Temperature (°C ) -20 to +40
Operating Humidity 10% to 85%
Environmental Class IP30
MTBF ( hr) ≥ 50,000
Mounting 19” Rack
Appendix I: Combiner Specifications
Electrical Band1 Band2 Band3 Band4
Operating Frequency (MHz) 698-788 824-894 1850-1995 1710-1755&2110-215
5
Insert Loss (dB) ≤ 0.7 ≤ 0.7 ≤ 0.8 ≤ 1
VSWR ≤ 1.6 ≤ 1.6 ≤ 1.6 ≤ 1.6
Mechanical
Dimensions HxWxD, mm (in)
226.5 x 58.6 x 251, (8.9 x 2.4 x 9.9)
Weight (approx.), kg (lb) 4, (8.8)
RF Connectors 4.3-10Female
Operating Temperature , C
(F) -20 to +40 (68 to 104)
Operating Humidity 85%
Environmental Class IP30
Note: Typical specification at room temperature;
Page 131 of 210
Appendix II: Ordering Information
Module Name P/N
RACK mBDA RACK Unit mBDA-RACK-E01
PMU mBDA Power and Monitor Unit mBDA-PMU-A92W300
COMBINER UNIT
mBDA DT Combiner mBDA-CB-ABPK4ID1
mBDA MT Combiner mBDA-CB-ABPK4ID2
RF UNIT
700MHz LowerABC mBDA RF Unit, 0.5W mBDA-RF-7LP27Q
700MHz LowerABC mBDA RF Unit, 2W mBDA-RF-7LP33Q
700MHz UpperC mBDA RF Unit, 0.5W mBDA-RF-7UP27Q
700MHz UpperC mBDA RF Unit, 2W mBDA-RF-7UP33Q
800MHz mBDA RF Unit, 0.5W mBDA-RF-80P27Q
800MHz mBDA RF Unit, 2W mBDA-RF-80P33Q
850MHz mBDA RF Unit, 0.5W mBDA-RF-85P27Q
850MHz mBDA RF Unit, 2W mBDA-RF-85P33Q
1900MHz mBDA RF Unit, 0.5W mBDA-RF-19P27Q
1900MHz mBDA RF Unit, 2W mBDA-RF-19P33Q
EAWS mBDA RF Unit, 0.5W mBDA-RF-EAWSP27Q
EAWS mBDA RF Unit, 2W mBDA-RF-EAWSP33Q
2600MHz mBDA RF Unit, 0.5W mBDA-RF-26P27
2600MHz mBDA RF Unit, 2W mBDA-RF-26P33
Page 132 of 210
mBDA Indoor Digital Band Selective Repeater
mBDA-300
Features
• Max. 5 bands of 700(APT) 850/1800 (or 1900)/2100 (or AWS)/2600MHz.
• Supports GSM, CDMA, WCDMA, and LTE operating.
• Supports multi operator configurations and up to 3 or 4 sub bands per band.
• Operation via OMT software.
• Friendly and easy OMT interface via RJ45 connection.
• Integrated wireless modem or Ethernet for remote monitoring and control.
ProductDescription
mBDA is a wireless enhanced solution where high-quality voice or high-speed data service is not
available between a mobile and a base station. mBDA is ideal for the first phase of the network rollout
and for any subsequent phase where cost, coverage, and quality need to be optimized.
mBDA offers a modular, robust design that is easy to install, manage and upgrade. It supports three
individually adjustable sub-bands for flexibility and high RF performance, supports multi-carrier and
multi-band operation.
Remote configuration and surveillance is possible through Comba’s remote control and monitoring
system via PC or wireless modem to the OMT/OMC.
Support Technologies
Frequency Range (MHz)
Band Technologies Downlink (DL) Uplink (UL)
700MHz* LTE 758-788 703-733
850MHz GSM/CDMA/WCDMA** 869-894 824-849
1800MHz GSM/LTE 1805-1880 1710-1785
1900MHz GSMCDMA/WCDMA** 1930-1995 1850-1915
AWS WCDMA/LTE 2110-2155 1710-1755
2100MHz WCDMA/LTE** 2110-2170 1920-1980
2600MHz LTE 2620-2690 2500-2570
*700MHz is APT band, 2 options as 703-733/758-788 and 718-748/773-803. **WCDMA complies with 3GPP TS 25.106 V9.0.0 (2009-12) table 9.2, 9.3, 9.4 spectrum emission mask.
Page 133 of 210
RF Parameters
LTE 700A
RF Parameter DL UL
Frequency Range (MHz) 758-788 703-733
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
GSM/CDMA/WCDMA 850 MHz
RF Parameter DL UL
Frequency Range (MHz) 869-894 824-849
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 23
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 0.2-24.8 0.2-24.8
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation1 3GPP 3GPP
GSM/LTE 1800 MHz
RF Parameter DL UL
Frequency Range (MHz) 1805-1880 1710-1785
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 23
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 4 4
Operating Bandwidth (MHz) 0.2-25 0.2-25
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
Page 134 of 210
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation2 3GPP 3GPP
Note: Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz; WCDMA Max. Bandwidth 15MHz; LTE Max. Bandwidth 20MHz.
1Intermodulation: WCDMA @ 3GPP; GSM/CDMA @ Less than-13dBm. 2Intermodulation: LTE @ 3GPP; GSM @ Less than-13dBm.
RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.5dB.
GSM/CDMA/WCDMA 1900 MHz
RF Parameter DL UL
Frequency Range (MHz) 1930-1995 1850-1915
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 23
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 0.2-25 0.2-25
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation1 3GPP 3GPP
WCDMA/LTE 2100 MHz
RF Parameter DL UL
Frequency Range (MHz) 2110-2170 1920-1980
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 4 4
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
Page 135 of 210
RF Parameters
WCDMA/LTE AWS
RF Parameter DL UL
Frequency Range (MHz) 2110-2155 1710-1755
Max Output Power Per Antenna Port1(Composite) 27, 30, 33 17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 3 3
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
LTE 2600 MHz
RF Parameter DL UL
Frequency Range (MHz) 2620-2690 2500-2570
Max Output Power Per Antenna Port 1(Composite)
27, 30, 33
17
2 Carriers -3 /
4 Carriers -6 /
8 Carriers -9 /
Sub-bands 4 4
Operating Bandwidth (MHz) 3-20 3-20
Maximum System Gain (dB) 80 80
Pass Band Ripple at FBW, p-p (dB) 4 4
System Noise Figure (dB) / 5
System Group Delay (sec) 6 6
Gain Adjustable Range 0-30 0-30
Emission Mask 3GPP 3GPP
Intermodulation 3GPP 3GPP
Note: Operating Bandwidth: GSM/CDMA Max. Bandwidth 25MHz, WCDMA Max. Bandwidth 15MHz, LTE Max. Bandwidth 20MHz.
1Intermodulation: WCDMA @ 3GPP; GSM/CDMA @ Less than-13dBm RF specification is without Combiner Unit, Comber Unit insert loss is less than 1.5dB.
Page 136 of 210
MechanicalSpecifications
Dimensions, Hx Wx D, mm (in)
System Rack (4 bands) 267 x482 x 485, (10.5 x 19 x19.1)
Power Unit 220 x 80 x 440, (8.7 x 3.1 x 17.3)
Combiner Unit 220 x 60 x 230, (8.7 x 2.4 x 9.1)
RF Unit 220 x 60 x 350, (8.7 x 2.4 x 13.8)
Weight, kg (lb) (approx.)
System Rack (4 bands) 13.2, (29.1)
Power and Monitor Unit 4, (8.8)
Combiner Unit 4, (8.8)
RF Card 3.8, (8.4)
Power Consumption, W (approx.) Power and Monitor Unit 15
RF Unit 50
Power Supply 100-240VAC/47-63Hz
Power Up Waiting Time (sec) (approx.)
180
Enclosure Cooling Convection or Fan
RF Connectors N Female
Operating Temperature (°C ) -20 to +40
Operating Humidity 10% to 85%
Environmental Class IP30
MTBF ( hr) ≥ 50,000
Mounting 19” Rack
Page 137 of 210
MP Series Digital Pico Repeater
Page 138 of 210
MP Series Digital Pico Repeater Features
• Bandwidth adjustable for both downlink and uplink.
• Max.2 pass band segments with independent ON/OFF for maximum flexibility.
• Max. 20dBm total output power.
• Offline isolation detection for easy commissioning.
• Low noise amplifier improves system noise figure for better voice quality and
reduced drop call.
• Highly integrated design with miniaturized enclosure, small size, light weight and
easy to install.
• Includes Modem for remote monitoring (option).
• Compatible to Comba generic OMT and CMS platform.
Block Diagram
MobileAntDonor
Ant
Mobile
PowerSupply
AlarmIndicator Main Control Unit
ExternalPowerOMT
Modem
DT MT
WirelessModem
OMC
BTS
Main Control UnitMain Control Unit
Integrated Frequency selective module
LNA1
PA2 LNA2
PA1
Page 139 of 210
800MHz Digital Pico Repeater
MP-0832
Specifications
Electrical 17dBm 20dBm
Operating Frequency, Uplink MHz 832-862
Operation Frequency, Downlink MHz 791-821
Instantaneous Bandwidth MHz 30
Operating Bandwidth Per Sub-band MHz 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 17 17
Total Output Power, Downlink dBm 17 20
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB ≤ 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 36.106 Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Weight (approx.) kg 0.5
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 14
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature
Page 140 of 210
900MHz Digital Pico Repeater
MP-9132
Specifications
Electrical 17dBm 20dBm
Operating Frequency, Uplink MHz 880-915
Operation Frequency, Downlink MHz 925-960
Instantaneous Bandwidth MHz 35
Operating Bandwidth Per Sub-band* MHz 0.2-25
Number of Sub-bands 2
Total Output Power, Uplink dBm 17 17
Total Output Power, Downlink dBm 17 20
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB ≤ 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 25.106 Compliance with 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Weight (approx.) kg 0.5
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 14
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 141 of 210
1800MHz Digital Pico Repeater
MP-1832
Specifications
Electrical 17dBm 20dBm
Operating Frequency, Uplink MHz 1710-1785
Operation Frequency, Downlink MHz 1805-1880
Instantaneous Bandwidth MHz 50
Operating Bandwidth Per Sub-band* MHz 0.2-25
Number of Sub-bands 2
Total Output Power, Uplink dBm 17 17
Total Output Power, Downlink dBm 17 20
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB ≤ 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 36.106 Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Weight (approx.) kg 0.5
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 14
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature *: GSM Max. Bandwidth 25MHz, LTE Max. Bandwidth 20MHz
Page 142 of 210
2100MHz Digital Pico Repeater
MP-2132
Specifications
Electrical 17dBm 20dBm
Operating Frequency, Uplink MHz 1920-1980
Operation Frequency, Downlink MHz 2110-2170
Instantaneous Bandwidth MHz 50
Operating Bandwidth Per Sub-band MHz 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 17 17
Total Output Power, Downlink dBm 17 20
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB ≤ 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 25.106 Compliance with 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 198 x 78 x 43
Weight (approx.) kg 0.5
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 14
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature
Page 143 of 210
Multi-band Digital Pico Repeater Features
• 2 or 3 bands configuration in one system
• Bandwidth adjustable for both downlink and uplink.
• Max.2 pass band segments with independent ON/OFF for maximum flexibility.
• 17 or 20dBm total output power.
• Offline isolation detection for easy commissioning.
• Low noise amplifier improves system noise figure for better voice quality and
reduced drop call.
• Highly integrated design with miniaturized enclosure, small size, light weight and
easy to install.
• Includes Modem for remote monitoring (option).
• Compatible to Comba generic OMT and CMS platform.
Functional Block Diagram
LTE DT
LNA PA
PA LNADuplexer
LNA PA
PA LNADuplexer
Band selective module
Band selective module
LTE MT
Band selective module
Band selective module
WCDMA DTWCDMA MT
Duplexer
Duplexer
Page 144 of 210
Dual-band Digital Pico Repeater
MP-7S32
Specifications-17dBm
Electrical 800MHz 1800MHz
Operating Frequency, Uplink MHz 832-862 1710-1785
Operation Frequency, Downlink MHz 791-821 1805-1880
Instantaneous Bandwidth MHz 30 50
Operating Bandwidth Per Sub-band* MHz 3-20 0.2-25
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14
Total Output Power, Downlink dBm 17 17
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance with 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 26
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 145 of 210
Specifications-20dBm
Electrical 800MHz 1800MHz
Operating Frequency, Uplink MHz 832-862 1710-1785
Operation Frequency, Downlink MHz 791-821 1805-1880
Instantaneous Bandwidth MHz 30 50
Operating Bandwidth Per Sub-band* MHz 3-20 0.2-25
Number of Sub-bands 2
Total Output Power, Uplink dBm 17 17
Total Output Power, Downlink dBm 20 20
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance with 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 26
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 146 of 210
Dual-band Digital Pico Repeater
MP-7U32
Specifications-17dBm
Electrical 800MHz 900MHz
Operating Frequency, Uplink MHz 832-862 880-915
Operation Frequency, Downlink MHz 791-821 925-960
Instantaneous Bandwidth MHz 30 35
Operating Bandwidth Per Sub-band* MHz 3-20 0.2-25
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14
Total Output Power, Downlink dBm 17 17
Maximum System Gain dB 70
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance with 3GPP
TS 36.106
Compliance with 3GPP TS 25.106
3GPP TS 36.106 Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.8
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 26
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz; WCDMA, LTE Max. Bandwidth 20MHz.
Page 147 of 210
Dual-band Digital Pico Repeater
MP-7V32
Specifications-17dBm
Electrical 800MHz 2100MHz
Operating Frequency, Uplink MHz 832-862 1920-1980
Operation Frequency, Downlink MHz 791-821 2110-2170
Instantaneous Bandwidth MHz 30 50
Operating Bandwidth Per Sub-band MHz 3-20 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14
Total Output Power, Downlink dBm 17 17
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 36.106
Compliance with 3GPP TS 25.106 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 26
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; .
Page 148 of 210
Specifications-20dBm
Electrical 800MHz 2100MHz
Operating Frequency, Uplink MHz 832-862 1920-1980
Operation Frequency, Downlink MHz 791-821 2110-2170
Instantaneous Bandwidth MHz 30 50
Operating Bandwidth Per Sub-band MHz 3-20 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 17 17
Total Output Power, Downlink dBm 20 20
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 36.106
Compliance with 3GPP TS 25.106 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 30
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; .
Page 149 of 210
Dual-band Digi tal Pico Repeater
MP-7532
Specifications-17dBm
Electrical 900MHz 1800MHz
Operating Frequency, Uplink MHz 880-915 1710-1785
Operation Frequency, Downlink MHz 925-960 1805-1880
Instantaneous Bandwidth MHz 35 50
Operating Bandwidth Per Sub-band* MHz 0.2-25 0.2-25
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14
Total Output Power, Downlink dBm 17 17
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB ≤ 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance with
3GPP TS 25.106 and 3GPP TS 36.106
Compliance with 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 26
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 150 of 210
Specifications-20dBm
Electrical 900MHz 1800MHz
Operating Frequency, Uplink MHz 880-915 1710-1785
Operation Frequency, Downlink MHz 925-960 1805-1880
Instantaneous Bandwidth MHz 35 50
Operating Bandwidth Per Sub-band* MHz 0.2-25 0.2-25
Number of Sub-bands 2
Total Output Power, Uplink dBm 17 17
Total Output Power, Downlink dBm 20 20
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB ≤ 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance with 3GPP TS 25.106 3GPP TS 36.106
Compliance with 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 30
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 151 of 210
Dual-band Digital Pico Repeater
MP-7632
Specifications-17dBm
Electrical 900MHz 2100MHz
Operating Frequency, Uplink MHz 880-915 1920-1980
Operation Frequency, Downlink MHz 925-960 2110-2170
Instantaneous Bandwidth MHz 35 50
Operating Bandwidth Per Sub-band* MHz 0.2-25 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14
Total Output Power, Downlink dBm 17 17
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 25.106
Compliance with 3GPP TS 25.106 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 26
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 152 of 210
Specifications-20dBm
Electrical 900MHz 2100MHz
Operating Frequency, Uplink MHz 880-915 1920-1980
Operation Frequency, Downlink MHz 925-960 2110-2170
Instantaneous Bandwidth MHz 35 50
Operating Bandwidth Per Sub-band* MHz 0.2-25 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 17 17
Total Output Power, Downlink dBm 20 20
Maximum System Gain dB 75
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 25.106
Compliance with 3GPP TS 25.106 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.0
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 26
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 153 of 210
Dual-band Digital Pico Repeater
MP-7832
Specifications-17dBm
Electrical 1800MHz 2100MHz
Operating Frequency, Uplink MHz 1710-1785 1920-1980
Operation Frequency, Downlink MHz 1805-1880 2110-2170
Instantaneous Bandwidth MHz 50 50
Operating Bandwidth Per Sub-band* MHz 0.2-25 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14
Total Output Power, Downlink dBm 17 17
Maximum System Gain dB 70
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask
Compliance with 3GPP TS 36.106
Compliance with 3GPP TS 25.106 3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.8
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 30
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 154 of 210
Tri-band Digital Pico Repeater
MP-5K32
Specifications
Electrical 800MHz 900MHz 2100MHz
Operating Frequency, Uplink MHz 832-862 880-915 1920-1980
Operation Frequency, Downlink MHz 791-821 925-960 2110-2170
Instantaneous Bandwidth MHz 30 35 50
Operating Bandwidth Per Sub-band* MHz 3-20 0.2-25 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14 14
Total Output Power, Downlink dBm 17 17 17
Maximum System Gain dB 70
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance
with 3GPP TS 36.106
Compliance with 3GPP TS
25.106 3GPP TS
36.106
Compliance with 3GPP TS
25.106 3GPP TS
36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.8
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 38
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 155 of 210
Tri-band Digital Pico Repeater
MP-5232
Specifications-17dBm
Electrical 900MHz 1800MHz 2100MHz
Operating Frequency, Uplink MHz 880-915 1710-1785 1920-1980
Operation Frequency, Downlink MHz 925-960 1805-1880 2110-2170
Instantaneous Bandwidth MHz 35 50 50
Operating Bandwidth Per Sub-band* MHz 0.2-25 0.2-25 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14 14
Total Output Power, Downlink dBm 17 17 17
Maximum System Gain dB 70
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance with 3GPP TS 25.1063GPP TS 36.106
Compliance with 3GPP TS
36.106
Compliance with 3GPP TS
25.106 3GPP TS
36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.8
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 38
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 156 of 210
Tri-band Digital Pico Repeater
MP-5632
Specifications
Electrical 800MHz 900MHz 1800MHz
Operating Frequency, Uplink MHz 832-862 880-915 1710-1785
Operation Frequency, Downlink MHz 791-821 925-960 1805-1880
Instantaneous Bandwidth MHz 30 35 50
Operating Bandwidth Per Sub-band* MHz 3-20 0.2-25 0.2-25
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14 14
Total Output Power, Downlink dBm 17 17 17
Maximum System Gain dB 70
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB 4 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance
with 3GPP TS 36.106
Compliance with 3GPP TS
25.106 3GPP TS
36.106
Compliance with
3GPP TS 36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.8
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x 55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 38
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -10 to +40
Operating Humidity 85%
Environmental Class IP30
MTBF hr 50,000
Remote Monitoring (option) Built in WCDMA Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz; WCDMA, LTE Max. Bandwidth 20MHz.
Page 157 of 210
Tri-band Digital Pico Repeater
MP-5832
Specifications
Electrical 800MHz 1800MHz 2100MHz
Operating Frequency, Uplink MHz 832-862 1710-1785 1920-1980
Operation Frequency, Downlink MHz 791-821 1805-1880 2110-2170
Operating Bandwidth Per Sub-band* MHz 3-20 0.2-25 3-20
Number of Sub-bands 2
Total Output Power, Uplink dBm 14 14 14
Total Output Power, Downlink dBm 17 17 17
Maximum System Gain dB 70
Attenuation Adjustment Range (1dB step) dB 0-30
ALC Range dB ≥ 15
Pass Band Ripple at FBW, p-p dB ≤ 4 4 4
System Group Delay sec ≤ 6
Spurious Emission Mask Compliance
with 3GPP TS 36.106
Compliance with 3GPP TS
36.106
Compliance with 3GPP TS
25.106 3GPP TS
36.106
Intermodulation
EVM
Absolute Maximum RF input power dBm -10
Input VSWR ≤ 2.8
Impedance 50
Mechanical
Dimensions, W x H x D mm 316 x 224 x55
Weight (approx.) kg 3
External Power Supply Unit Input VAC 100-240/50-60Hz
Output VDC 12
Power Consumption W 38
Enclosure Cooling Convection
Connectors SMA-Female (SMA-Male to N-Female jumper included)
Operating Temperature °C -20 to +45
Operating Humidity 85%
Environmental Class IP40
MTBF hr 50,000
Remote Monitoring (option) Built in Wireless Modem
Note: Typical specification at room temperature; *: GSM Max. Bandwidth 25MHz, WCDMA, LTE Max. Bandwidth 20MHz.
Page 158 of 210
Public Safety
Page 159 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-7W22 Class A PS 700/800MHz BDA
Features
• Digital/programmable utilizing FPGA
• Supports public safety 700/800MHz in single band or dual band version
• Supports P25 P1/P2 digital and conventional analogcommunications
simultaneously
• Supports FirstNetTM LTE band 14
• Single band versions include license to switch from original band to alternate
band
• Single band can be upgradedto dual band via license key
• Each band supports up to 32 channels
• 0.5/2W output power for each band
• Channelized Auto Gain Control (AGC) / Channelized uplink squelch
• Built-in mandatory isolation test to prevent BDA oscillation
• Auto shutdown with alarm upon oscillation detection
• Web based GUI for intelligent configuration, SNMP supported
• NFPA compliant dry contact alarms, NEMA 4X enclosure
• FCC: PX8RX-7W22, IC: 11919A-RX7W22
Specifications
Electrical 700MHz 800MHz
Frequency Range, Uplink MHz US: 788-805, CA:
798-806 806-824
Frequency Range, Downlink MHz US: 758-775, CA:
768-776 851-869
Channel Bandwidth KHz 12.5/25/75+10MHz (LTE,
US) 12.5/25/75
Number of Channels US: 32+1 (LTE), CA: 32 32
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 27/33 27/33
Maximum System Gain dB 90 90
Gain Adjustment Range (1dB step) dB 0-30 0-30
Pass Band Ripple, p-p dB 5 5
Uplink Noise Figure dB 5 5
System Group Delay
Bandwidth: 12.5KHz
sec
35 35
Bandwidth: 25KHz 27 27
Bandwidth: 75KHz 15 15
Bandwidth: 10MHz (LTE)
6.5 6.5
Out-of-Band Suppression
Bandwidth: 12.5KHz
dBc
≥ 80 @ filter center + 75KHz
≥ 80 @ filter center + 75KHz
Bandwidth: 25KHz ≥ 80 @ filter center +
75KHz ≥ 80 @ filter center +
75KHz
Bandwidth: 75KHz ≥ 80 @ filter center +
200KHz ≥ 80 @ filter center +
200KHz
Bandwidth: 10MHz (LTE)
≥ 45 @ filter edge + 0.6MHz
≥ 60 @ filter edge + 1MHz
≥ 45 @ filter edge + 0.6MHz
≥ 60 @ filter edge + 1MHz
Intermodulation dBm -13 -13
Spurious 9kHz to 1GHz dBm FCC Compliance FCC Compliance
Page 160 of 210
Electrical 700MHz 800MHz
1GHz to 12.75GHz dBm
Absolute Maximum RF Input Power dBm 10 10
Input VSWR 1.5 1.5
Impedance 50 50
Specifications
Mechanical
Dimensions, H x W x D in(mm
) 20.9 x 15.4 x 8.3 (530 x 390 x 210)
Weight(without bracket) lb(kg) 50.7 (23)
Power Supply VAC 100-240/47-63Hz
VDC -40 to -58
Power Consumption Single band W 80
Dual band W 100
Enclosure Cooling Convection
RF Connectors N-Female
Test Port SMA, -22dB
Maximum Input for Dry Contact Port 24VDC, 1A / 110VAC, 0.5A
Operating Temperature oF(°C) -27 to +140 (-33 to +60)
Operating Humidity 95%
Environmental Class NEMA 4X
MTBF hr ≥100,000 @ 77oF
Note: Typical specifications at room temperature,
OutlineDrawing
DT MT
AC 100V-240V
50Hz/60Hz
AUX
PWR
ALM
RUN
ALM1
MT_TEST
DT_TEST
LAN
OMT
ALM2
Page 161 of 210
Part Numbers
Product Type P/N
AC Version DC Version
UL Certificate SGSNA_17_GZ_00139 SGSNA_17_GZ_00138
Class A (US)
Single band 700MHz RX7W22-07AA33AC RX7W22-07AA3348
Single band 800MHz RX7W22-08AA33AC RX7W22-08AA3348
Dual band 700/800MHz RX7W22-78AA33AC RX7W22-78AA3348
Class A (Canada)
Single band 700MHz RX7W22-C7AA33AC RX7W22-C7AA3348
Single band 800MHz RX7W22-C8AA33AC RX7W22-C8AA3348
Dual band 700/800MHz RX7W22-CFAA33AC RX7W22-CFAA3348
License
Dual Band (700/800MHz) License RX7W22-L783233
Page 162 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-7W22 Class B PS 700/800MHz BDA
Features
• Digital/programmable utilizing FPGA
• Supports public safety 700/800MHz in single band or dual band version
• Supports P25 P1/P2 digital and conventional analogcommunications
simultaneously
• Supports FirstNetTM LTE band 14
• Single band versions include license to switch from original band to alternate
band
• Single band can be upgraded to dual band via license key
• Each band supports up to 3 sub bands
• 0.5/2W output power for each band
• Built-in mandatory isolation test to prevent BDA oscillation
• Auto shutdown with alarm upon oscillation detection
• Web based GUI for intelligent configuration, SNMP supported
• NFPA compliant dry contact alarms, NEMA 4X enclosure
• FCC: PX8RX7W22-B, IC: 11919A-RX7W22
Specifications
Electrical 700MHz 800MHz
Frequency Range, Uplink MHz US: 788-805, CA:
798-806 US:806-817, CA:806-824
Frequency Range, Downlink MHz US: 758-775, CA:
768-776 US:851-862, CA:806-824
Operating Bandwidth MHz 0.2-10 0.2-10
Number of Sub Bands 3 3
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 27/33 27/33
Maximum System Gain dB 90 90
Gain Adjustment Range (1dB step) dB 0-30 0-30
Pass Band Ripple, p-p dB 5 5
Uplink Noise Figure dB 5 5
System Group Delay sec 6.5 6.5
Out-of-Band Suppression dBc ≥ 45 @ filter edge +
0.6MHz ≥ 60 @ filter edge + 1MHz
≥ 45 @ filter edge + 0.6MHz
≥ 60 @ filter edge + 1MHz
Intermodulation dBm -13 -13
Spurious 9kHz to 1GHz dBm
FCC Compliance FCC Compliance 1GHz to 12.75GHz dBm
Absolute Maximum RF Input Power dBm 10 10
Input VSWR 1.5 1.5
Impedance 50 50
Page 163 of 210
Specifications
Mechanical
Dimensions, H x W x D in(mm) 20.9 x 15.4 x 8.3 (530 x 390 x 210)
Weight(without bracket) lb(kg) 50.7 (23)
Power Supply VAC 100-240/47-63Hz
VDC -40 to -58
Power Consumption Single band W 80
Dual band W 100
Enclosure Cooling Convection
RF Connectors N-Female
Test Port SMA, -22dB
Maximum Input for Dry Contact Port 24VDC, 1A / 110VAC, 0.5A
Operating Temperature oF(°C) -27 to +140 (-33 to +60)
Operating Humidity 95%
Environmental Class NEMA 4X
MTBF hr ≥ 100,000 @ 77oF
Note: Typical specifications at room temperature,
Outline Drawing
DT MT
AC 100V-240V
50Hz/60Hz
AUX
PWR
ALM
RUN
ALM1
MT_TEST
DT_TEST
LAN
OMT
ALM2
Page 164 of 210
Part Numbers
Product Type P/N
AC Version DC Version
UL Certificate SGSNA_17_GZ_00139 SGSNA_17_GZ_00138
Class B(US)
Single band 700MHz RX7W22-07B333AC RX7W22-07B33348
Single band 800MHz RX7W22-08B333AC RX7W22-08B33348
Dual band 700/800MHz RX7W22-78B333AC RX7W22-78B33348
Class B (Canada)
Single band 700MHz RX7W22-C7B333AC RX7W22-C7B33348
Single band 800MHz RX7W22-C8B333AC RX7W22-C8B33348
Dual band 700/800MHz RX7W22-CFB333AC RX7W22-CFB33348
License
Dual Band (700/800MHz) License RX7W22-L78B333
Page 165 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-7W22 II2 5W Class A PS 700/800MHz BDA
Features
• Digital/programmable utilizing FPGA
• Supports public safety 700/800MHz in single band or dual band version
• Supports P25 P1/P2 digital and conventional analog communications simultaneously
• Single band versions include license to switch from original band to alternate band
• Single band can be upgraded to dual band via license key
• Each band supports up to 32 channels
• 5W output power for each band
• Channelized Auto Gain Control (AGC) / Channelized uplink squelch
• Built-in mandatory isolation test to prevent BDA oscillation
• Auto shutdown with alarm upon oscillation detection
• Web based GUI for intelligent configuration, SNMP supported
• NFPA compliant dry contact alarms, NEMA 4X enclosure
Specifications
Electrical 700MHz 800MHz
Frequency Range, Uplink MHz 799-805 806-824
Frequency Range, Downlink MHz 769-775 851-869
Channel Bandwidth KHz 12.5/25/100 12.5/25/100
Number of Channels 32 32
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 37
Maximum System Gain dB 100 100
Gain Adjustment Range (1dB step) dB 0-30 0-30
Pass Band Ripple, p-p dB 5 5
Uplink Noise Figure dB 5 5
System Group Delay
Bandwidth: 12.5KHz
sec
35 35
Bandwidth: 25KHz 25 35
Bandwidth: 100KHz 15 15
Out-of-Band Suppression
Bandwidth: 12.5KHz
dBc
≥ 60 @ filter center + 75KHz
≥ 60 @ filter center + 75KHz
Bandwidth: 25KHz ≥ 60 @ filter center +
75KHz ≥ 60 @ filter center +
75KHz
Bandwidth: 100KHz ≥ 60 @ filter center +
200KHz ≥ 60 @ filter center +
200KHz
Intermodulation dBm -13 -13
Spurious 9kHz to 1GHz dBm
FCC Compliance FCC Compliance 1GHz to 12.75GHz dBm
Maximum RF Input Power without Damage dBm -10 -10
Maximum RF Input Power without Overdrive dBm -20 -20
Input VSWR 1.5 1.5
Impedance 50 50
Mechanical
Page 166 of 210
Dimensions, H x W x D in(mm) 22.4 x 15.4 x 9.0 (570 x 390 x 228)
Weight(without bracket) lb(kg) 66.2 (30)
Power Supply VAC 100-240/47-63Hz
VDC -40 ~ -58
Power Consumption
Single band W 120
Dual band W 200
Enclosure Cooling Convection
RF Connectors N-Female
Test Port SMA, -27dB
Maximum Input for Dry Contact Port 24VDC, 1A / 110VAC, 0.5A
Operating Temperature oF( oC) -27 to +140 (-33 to +60)
Operating Humidity 95%
Environmental Class NEMA 4X
MTBF hr ≥ 100,000 @ 77 oF
Note: Typical specifications at room temperature,
Outline Drawing
Page 167 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-7W22 II2 5W Class B PS 700/800MHz BDA
Features
• Digital/programmable utilizing FPGA
• Supports public safety 700/800MHz in single band or dual band version
• Supports P25 P1/P2 digital and conventional analog communications simultaneously
• Supports FirstNetTM LTE band 14
• Single band versions include license to switch from original band to alternate band
• Single band can be upgraded to dual band via license key
• Each band supports up to 3 sub bands
• 5W output power for each band
• Built-in mandatory isolation test to prevent BDA oscillation
• Auto shutdown with alarm upon oscillation detection
• Web based GUI for intelligent configuration, SNMP supported
• NFPA compliant dry contact alarms, NEMA 4X enclosure
Specifications
Electrical 700MHz 800MHz
Frequency Range, Uplink MHz 788-805 806-824
Frequency Range, Downlink MHz 758-775 851-869
Operating Bandwidth MHz 0.2-10 0.2-10
Number of Sub Bands 3 3
Total Output Power, Uplink dBm 30
Total Output Power, Downlink dBm 37 37
Maximum System Gain dB 100 100
Gain Adjustment Range (1dB step) dB 0-30 0-30
Pass Band Ripple, p-p dB 5 5
Uplink Noise Figure dB 5 5
System Group Delay sec 6.5 6.5
Out-of-Band Suppression dBc
≥ 45 @ filter edge + 0.6MHz
≥ 60 @ filter edge + 1MHz
≥ 45 @ filter edge + 0.6MHz
≥ 60 @ filter edge + 1MHz
Intermodulation dBm -13 -13
Spurious 9kHz to 1GHz dBm
FCC Compliance FCC Compliance 1GHz to 12.75GHz dBm
Maximum RF Input Power without Damage dBm -10 -10
Maximum RF Input Power without Overdrive dBm -20 -20
Input VSWR 1.5 1.5
Impedance 50 50
Page 168 of 210
Mechanical
Dimensions, H x W x D in(mm) 22.4 x 15.4 x 9.0 (570 x 390 x 228)
Weight(without bracket) lb(kg) 66.2 (30)
Power Supply VAC 100-240/47-63Hz
VDC -40 ~ -58
Power Consumption
Single band W 120
Dual band W 200
Enclosure Cooling Convection
RF Connectors N-Female
Test Port SMA, -27dB
Maximum Input for Dry Contact Port 24VDC, 1A / 110VAC, 0.5A
Operating Temperature oF( oC) -27 to +140 (-33 to +60)
Operating Humidity 95%
Environmental Class NEMA 4X
MTBF hr ≥ 100,000 @ 77 oF
Note: Typical specifications at room temperature,
Page 169 of 210
CriticalPoint™ Public Safety Bi-Directional Amplifier
RX-4122 PS UHF 400MHz BDA
Features
• Supports P25 P1/P2 digital and conventional analog communications simultaneously
• Simplex and internal Duplexing supported
• Internal dual window filter supported
• Up to 32 narrow band filters (Class A)
• Up to 4 wide band filters (Class B)
• Channelized Auto Level Control (ALC) supported (Class A)
• Channelized uplink squelch supported (Class A)
• Uplink PA shutdown bring the minimum noise for Base Station
• Built-in mandatory isolation test to prevent BDA oscillation
• Auto shutdown with alarm upon oscillation detection
• Web based GUI for intelligent configuration, SNMP supported
• NFPA 1221 / IFC compliant dry contact alarms
• NFPA 1221 / IFC compliant NEMA 4 enclosure
• FCC Class A: PX8-RX4122-A, Class B: PX8-RX4122-B
• UL AC: SGSNA/18/GZ/00076, DC: SGSNA/18/GZ/00075
Specifications
Electrical
Frequency Range MHz 450 - 512
Total Output Power, Uplink dBm 27
Total Output Power, Downlink dBm 36 (TX/RX separate without Filter)
RF Windows (internal)
Single Window 2MHz @450-470MHz Single Window 1MHz @470-512MHz
Dual Window 2MHz + 2MHz @450-470MHz Dual Window 1MHz + 1MHz @470-512MHz Dual Window 2MHz@450-470MHz + 1MHz
@470-512MHz *Note
Maximum System Gain dB 95
Gain Adjustment Range (1dB step) dB 0-30
Pass Band Ripple, p-p dB 3
Uplink Noise Figure dB 7
Intermodulation dBm -13
Spurious dBm FCC Compliance
Maximum RF Input Level without Damage dBm 0
Maximum RF Input Level without Overdrive -10
Input VSWR 1.5
Impedance 50
*Note: Consult for passband and window configurations other than listed above
Page 170 of 210
Class A
Number of Filters 32
Filter Options / Out-of-Band Suppression / System Group Delay
Bandwidth: 6.25KHz
≥ 60dBc @ filter center + 60KHz, 35us
Bandwidth: 12.5KHz ≥ 60dBc @ filter center + 65KHz, 35us
Bandwidth: 25KHz ≥ 50dBc @ filter center + 75KHz, 27us
Bandwidth: 75KHz ≥ 60dBc @ filter center + 200KHz, 15us
Class B
Number of Filters 4
Filter Options 200KHz – 5MHz
System Group Delay sec 6.5
Out-of-Band Suppression ≥ 45dBc @ filter edge + 0.6MHz ≥ 60dBc @ filter edge + 1MHz
Mechanical
Dimensions, H x W x D in(mm
) 31.5x15.4x12.4 (800×390×315)
Weight(without bracket) lb(kg) 77 (35)
Power Supply VDC -40 to -58
VAC 120
Power Consumption W 85
Enclosure Cooling Convection
RF Connectors N-Female
Operating Temperature o F(oC) -27 to +140 (-33 to +60)
Operating Humidity 95%
Environmental Class NEMA 4
Note: Typical specifications at room temperature
Part Numbers
RX4122-XXYYZZFF
XX YY ZZ FF
Unit Class and Filter Numbers: 32 – Class A 32 filters B4 – Class B 4 filters
Power Level (TX/RX separate): 36 – 36dBm
Power Supply: AC – AC powered DC – DC Powered
Filter Options: Various due to different filter model
Outline Drawing
390
315
270
80
0
Page 171 of 210
CriticalPoint™Public Safety Distributed Antenna System
RH-7W22 PS 700/800MHz DAS
Features
• Dual-band configuration supports 700MHz and 800MHz public safety bands
• Supports P25 P1/P2 digital and conventional analog communications simultaneously
• Supports FirstNetTM LTE Band 14 (Class B)
• Up to 32channels (Class A) / 3 sub bands (Class B)
• 2W output power per band
• Channelized Auto Level Control (ALC) supported (Class A)
• Channelized uplink squelch supported (Class A)
• Web based GUI for intelligent configuration, SNMP supported
• Built-in mandatory isolation test to prevent oscillation
• NFPA 1221 compliant dry contact alarms on MU/RUs
• NFPA 1221 compliant NEMA4X enclosure for MU/RUs
• FCC/UL approvals pending
Functional Block Diagram
…
…
Remote Unit
Remote Unit
Master Unit Up to 8
Master Unit Remote Unit
Master Unit
Remote Unit
Page 172 of 210
Specifications
Optical
System 700MHz,800MHz
Optical Fiber Single Mode
Optical Wavelength nm 1550, 1310 + WDM
Optical Output Power MU dBm -4 to -2
RU dBm 3 to 5
Maximum Optical Loss dB 6.5
Fiber Connectors MU: SC/APC, RU: SC/APC
Electrical (Class A)
700MHz 800MHz
Frequency Range Uplink
MHz 799-805 806-824
Downlink 769-775 851-869
Channel Bandwidth 12.5/25/75KHz 12.5/25/75KHz
Number of Filters 32 32
Total Output Power, Uplink dBm 27
Total Output Power, Downlink 33 33
Maximum System gain dB 95
Gain Adjustment Range (1dB step) dB MU: 0-30, RU: 0-30
Pass Band Ripple (p-p) dB ≤ 3 ≤ 3
Spurious emission FCC Compliance FCC Compliance
Inter modulation dBm -13 -13
Uplink Noise Figure at Maximum Gain dB ≤ 5
System Delay sec 17-37
Max UL Input w/o Overdrive dBm -30
Max UL Input w/o Damage dBm -10
Input VSWR 1.5
Impedance 50
Electrical (Class B)
700MHz 800MHz
Frequency Range Uplink
MHz 788-805 806-817
Downlink 758-775 851-862
Channel Bandwidth 200KHz - 10MHz 200KHz - 10MHz
Number of Filters 3 3
Total Output Power, Uplink dBm 27
Total Output Power, Downlink 33 33
Maximum System gain dB 95
Gain Adjustment Range (1dB step) dB MU: 0-30, RU: 0-30
Pass Band Ripple (p-p) dB ≤ 3 ≤ 3
Spurious emission FCC Compliance FCC Compliance
Inter modulation dBm -13 -13
Uplink Noise Figure at Maximum Gain dB ≤ 5
System Delay sec 8.5
Max UL Input w/o Overdrive dBm -30
Max UL Input w/o Damage dBm -10
Input VSWR 1.5
Impedance 50
Page 173 of 210
Specifications
Mechanical –MU
Dimensions, H x W x D in(mm) 22.4 x 15.4 x 8.5 (570 x 390 x 215)
Weight without Bracket lb(kg) 66 (30)
Power Supply VDC -40 to -58
Power Consumption (approx.) W 100
RF Connectors N-Female, duplex
Fiber Connectors SC/APC
Operating Temperature °C -40 to +55
Operating Humidity ≤ 95%
Ingress protection NEMA 4X
Enclosure Cooling Convection
MTBF 100,000 @ 77 oF
Mechanical –RU
Dimensions, H x W x D in(mm) 22.4 x 15.4 x 8.5 (570 x 390 x 215)
Weight without Bracket lb(kg) 66 (30)
Power Supply VDC -40 to -58
Power Consumption (approx.) W 100
RF Connectors N-Female, duplex
Fiber Connectors SC/APC
Operating Temperature °C -40 to +55
Operating Humidity ≤ 95%
Ingress protection NEMA 4X
Enclosure Cooling Convection
MTBF 100,000 @ 77 oF
Note: Typical specifications at room temperature
Part Numbers
Product Type Part Number
Class A
MU Dual Band 700/800MHz, 1 to 4 x RUs, DC-48V RH7W22-D7848E4
MU Dual Band 700/800MHz, 1 to 8 x RUs, DC-48V RH7W22-D7848E8
RU Single Band 700MHz, DC-48V RH7W22-R073348
RU Single Band 800MHz, DC-48V RH7W22-R083348
RU Dual Band 700/800MHz, DC-48V RH7W22-R783348
Class B
MU Dual Band 700/800MHz, 1 to 4 x RUs, DC-48V RH7W22-D78B48E4
MU Dual Band 700/800MHz, 1 to 8 x RUs, DC-48V RH7W22-D78B48E8
RU Single Band 700MHz, DC-48V RH7W22-R07B3348
RU Single Band 800MHz, DC-48V RH7W22-R08B3348
RU Dual Band 700/800MHz, DC-48V RH7W22-R78B3348
License (For Class A and Class B)
Dual Band (700/800MHz) License RH7W22-L7833
Page 174 of 210
CriticalPoint™ Public Safety Backup Battery Unit
PSU-9248
Features
• Provides the uninterruptible power supply (-48V) to Public Safety BDA or DAS.
• Supports multi alarm LEDs:
AC fail alarm
Battery alarm
Power controller failure alarm
4 External alarms
• Provides 4 External ports to connect Dry Contact Port of Public Safety BDA or DAS
• Provides 7 Dry connectors to the monitor centre.
• Supports local monitoring and control by WIFI or RJ45 port.
Specifications
Mechanical
Dimensions, H x W x D in(mm) 29.4 x 23.8 x 12.0 (747 x
605 x 305)
Weight(without bracket) lb(kg) 44.1(20) (not include the
batteries)
Power Supply (Input) VAC 100-240/47-63Hz
Power Supply (Output) VDC -48V
Power Capacity Type 1 100W12H
Type 2 100W24H or 200W12H
Enclosure Cooling Convection
Maximum Input for Dry Contact Port 24VDC, 3A
Operating Humidity 95%
Environmental Class NEMA 4X
Note: Typical specifications at room temperature,
Outline Drawing
CriticalPoint
AC Fail Operating
On Battery
Battery Low Charger Fail EXT_ALM1
(Booster)
EXT_ALM2
(Donor Antenna)
EXT_ALM3
(System Component)
EXT_ALM 4AC Input Normal
Page 175 of 210
Wireless Access Product
Page 176 of 210
Home Small Cell
HNB-35,A01
• 8 Active Users 24 RRC connected user
• Home Small Cell
• Smart Integrated MIMO Antenna
Comba Home Small Cell Solution
LTE Home Small Cell provides cellular indoor coverage via broadband IP backhaul. It is suitable for small hotspot indoor scenarios like home, small enterprise, office, business hall, Internet café, solving cellular network issues including weak coverage, low data rate and site acquisition. It increases capacity for data service and offloads macro network by absorbing traffic from indoor hotspots. The Comba LTE Small Cell solution includes Home Small Cell, Gateway and NMS (Network Management System). The architecture is shown in figure1.
Application Scenarios
• In-building coverage
• In-building data offload
• Home, Small Enterprise wireless broadband
• Small public hotspots
• Emergency coverage
Product Features
• Extends LTE mobile coverage to small, hard-to-reach areas
• Supports up to 8 active users and 24 RRC connected users, ideal for small home/office, and small
public hotspots
• Backhaul through fixed broadband; avoid CAPEX acquiring and building new sites, reduce OPEX
on backhaul transmission, power and operations
• Support CSFB\VOLTE
• Remote control and management through Network Management System (NMS), including software
upgrades and service activation
Page 177 of 210
Technical Specification
Electrical Specifications
Operating Frequency(MHz)
Band TDD/FDD Uplink(MHz) Downlink(MHz)
1 FDD 1920-1980 2110-2170
3 FDD 1710-1785 1805-1880
40 TDD 2320-2370
RF Specifications
Bandwidth/Carrier 10/20 MHz
Max. Total Output Power 100mW 2x2 MIMO
Max Capacity DL=149Mbps, UL=50Mbps;
8 active users, 24 RRC users
Sensitivity -93.5 dBm
Listening band Band1, band3 and band7
Synchronization Air interface
IEEE 1588 ACR
Emission Mask
Compliant to 3GPPTS 36 104 Spurious Emission
Inter-modulation
Power, Mechanical and Environmental Specifications
Dimension 200mm ×152mm×58mm
Weight < 1.0kg
Power Supply +12V DC Input(Power Adaptor)
Power Consumption <15W
Mounting Method Desk top
Operating Temperature -5Cto +40C
Cooling Method Natural
Operating Humidity 10% to 90%
Storage Temperature -40Cto 65C
IP Rating IP30
Product Interface
Interface Function
WAN ( Electrical Port)
RJ45 100/1000M Ethernet for backhaul
LAN RJ45
10/100M for Fast Ethernet and Local Commissioning
POWER Power Supply interface
+12V DC input
ON/OFF Power on/off switch
RESET Reset to manufacture setting
Page 178 of 210
Enterprise Small Cell
ENB-35
• 64 Active Users
• Standalone Small Cell
• Smart Integrated MIMO Antenna
Enterprise Small Cell Solution
Enterprise Small Cell can provide cellular indoor coverage via broadband IP backhaul. It is suitable for small hotspot indoor scenarios like enterprise, office, business hall, Internet café, solving cellular network issues including weak coverage, low data rate and site acquisition. It increases capacity for data service and offloads macro network by absorbing traffic from indoor hotspots. The Comba Enterprise Small Cell solution includes Small Cell, Gateway and NMS (Network Management System). The architecture is shown in figure1.
Application Scenarios
• In-building coverage
• In-building data offload
• Small Enterprise wireless broadband
• Public hotspots
• Emergency coverage
Product Features
• Extends LTE mobile coverage to small, hard-to-reach areas
• Supports up to 64 active users, ideal for small home/office, and small public hotspots
• Backhaul through fixed broadband; avoid CAPEX acquiring and building new sites, reduce OPEX
on backhaul transmission, power and operations
• Standard open interface enables easy integration with other vendors’ network elements
• Support CSFB\VOLTE
• Remote control and management through Network Management System (NMS), including software
upgrades and service activation
Page 179 of 210
Technical Specification
Electrical Specifications
Operating Frequency(MHz)
Band TDD/FDD Uplink(MHz) Downlink(MHz)
1 FDD 1920-1980 2110-2170
3 FDD 1710-1785 1805-1880
40 TDD 2320-2370
RF Specifications
Bandwidth/Carrier 5/10/15/20 MHz
Max. Total Output Power 24dBm
Sensitivity -93.5 dBm
Emission Mask
Compliant to 3GPP TS 36 104 Spurious Emission
Inter-modulation
Power, Mechanical and Environmental Specifications
Dimension < 2L
Interface RJ45
(WAN & Power Supply)
Weight < 1kg
Power Supply PoE+ or
+12V DC Input(Power Adaptor)
Power Consumption < 14W
Mounting Method Ceiling mounting or Wall mounting
Operating Temperature -5Cto +40C
Cooling Method Natural
Operating Humidity 15% to 85%
Storage Temperature -40Cto 65C
IP Rating IP20
Product Interface
Interface Function
WAN(Optical Port) SFP, Optical Port for backhaul
WAN(Electrical Port) RJ45, Gigabit-Ethernet interface, backhaul & POE+ Power Supply
LAN RJ45, 100Mbps Fast Ethernet, Local Commissioning port
SIM SIM Card Interface, for Equipment authorization
POWER Power Supply interface, +12V DC input
GPS SMA, GPS Frequency and Time Synchronization input
Reserved Port RJ45, Reserved
Page 180 of 210
Distributed Small Cell
4G Distributed Small Cell
Description
Distributed Small Cell is composed of CP (Center Point) and DP (Distributed Point) and AU (Access Unit), providing cellular indoor coverage via broadband IP backhaul. It is suitable for small-to-medium indoor scenarios like enterprise, office, business hall, Internet café, solving cellular network issues including weak coverage, low data rate and site acquisition. It increases capacity for data service and offloads macro network by absorbing traffic from indoor hotspots or buildings. AU is the Access Unit of Distributed Small Cell for centralized signal processing and control. It connects to EPC for S1 signalling processing. CP is the center point of Distributed Small Cell system for distributed signal processing, routing and broadcasting. To upper level, it connects to AU. To lower level, it connects to sub level CP via optical cable (Daisy Chain connection) or/and connects to DP via Ethernet cable. DP is the distributed point for cellular signal broadcasting. DP is directly connecting to CP with PoE+ (Power over Ethernet) rolling.
Main Features • Support 5MHz/10MHz/15MHz/20MHz bandwidth
• Flexible solution for small-to-medium scenarios
• IP-based backhaul, easy site acquisition
• Plug and play, PoE+ power supply and IT Network-like deployment
• Self-configuration and self-optimization
• End-to-End control and management through Network Management System (NMS)
• Software/hardware failure detection and recover
• Intelligent power Saving
Application Scenarios
• Small-to-Medium in-building coverage
• In-building data offload
• Enterprise wireless broadband
• Emergency Telecommunications Service
Page 181 of 210
General Specification
DP(Distributed Point)
• Mini Distributed Point with internal antenna for LTE MIMO (2T2R)
• Active Component: RF power software controllable, PoE+
• Supporting FDD-LTE, TDD-LTE or UMTS
• Supporting Band 1/2/3/4/7/40 (other bands can be customized)
• Signaling control and processing
• Remote control and monitoring
CP (Center Point)
• Eight RJ45 for DP connection
• Four SFP ports for daisy chain connecting
• Software defined Switch & Converge & Processing
• PSU(Power Supply Unit) for PoE+ supply
AU(Access Unit)
• Cloud RAN Design for Cell signal provision
• GPS/1588V2 Synchronization
• Electrical/Optical backhaul interface
• Flexible capacity upgrade: Carrier Aggregation(CA)/Cell Splitting
Ubiquitous Coverage
Page 182 of 210
DP (Distributed Point)
Product Description
Through Cat5E or above cable, DP (Distributed Point) connects to CP (Center Point) and serves as active cellular signal provision. Different DPs servers as an ideal solution for small-to-medium scenario coverage.
Product Features
• Extend LTE coverage to hard-to-reach areas
• LTE 5MHz/10MHz/15MHz/20MHz
• LTE MIMO 2 x 2 with interated Antenna
• Support 2 UMTS Carriers(Optional)
• Remote control and management through Network Management System (NMS), including software
upgrade, power configuration, alarm etc.
• Plug and play, PoE+ power supply and IT Network-like deployment.
• The distance between CP and DP can up to 100m by Cat5E or above cable
Technical Specification
Electrical Specifications
Operating Frequency(MHz)
Band TDD/FDD/UMT
S Uplink(MHz) Downlink(MHz)
1 FDD/UMTS 1920-1980 2110-2170
3 FDD 1710-1785 1805-1880
40 TDD 2300-2370
RF Specifications
RF Module LTE UMTS
Support Bandwidth(MHz)
5/10/15/20 5 x 2(Carriers)
Max. Total Output Power
24dBm(2x2 MIMO) 23dBm(SISO, 2Carriers)
Sensitivity -93.5 dBm @20MHz N/A
Output Power Accuracy
±2dB ±2dB
Output Power Range 20dB N/A
Emission Mask Compliant to 3GPP TS 36 104
3GPP TS 25.106 FCC
Spurious Emission
Inter modulation
Page 183 of 210
Technical Specification
Power, Mechanical and Environmental Specifications
Dimension (L x W x H)
6.7” x 6.7” x 1.8” (Single Mode) (170mm x 170m x 46 mm)
8.3” x 8.3” x 1.8” (Dual Mode) (210mm x 210m x 46 mm)
Interface RJ45 * 2
Weight < 0.5kg(Single Mode) < 0.8kg(Dual Mode)
Power Supply PoE+
Power Consumption < 10W(Single Mode) < 18W(Dual Mode)
Mounting Method Ceiling mounting or Wall mounting
Operating Temperature -5C to +45C
Cooling Method Natural
Operating Humidity 15% to 85%
Storage Temperature -40C to 65C
IP Rating IP20
Page 184 of 210
CP (Center Point)
Product Description
CP (Center Point) is the center processing part of Distributed Small Cell. It can greatly increase the Small Cell coverage by daisy chain connection. Meanwhile, it can switch, converge and compress the data for better Ethernet transition.
Product Features
• 8 extension ports (RJ45) for DP direct connection
• 4 level daisy chain connecting, extend the transmission distance up to 5km
• PoE+ power supply
• Signal switch, convergence and compress
• NMS/EMS for remote management, including software downloading, upgrade, alarm, KPI report etc
• 1U size, easy installation on rack or wall mount
Technical Specification
Interfaces of CP
LAN1 LMT(Local Management Terminal 1, RJ45)
SFP1 Optical port to signal source 1
SFP2 Optical port to signal source 2
SFP3 Optical port for CP daisy chain
SFP4 Reserved
ETH1~ETH8 DP Connection Port, 8 x1000Mbps RJ45, software configurable
Power Socket AC:100V - 240V (47Hz - 63Hz)
ON/OFF Switch Power supply ON/OFF switch
Power, Mechanical, and Environmental Specifications
Total Dimension (L x W x H) 300mm x 240mm x 44mm
Weight < 3kg
Power Supply AC: 110/220V (47Hz - 63Hz)
Mounting Method Rack mounting or Wall mounting
Operating Temperature -5C to 40C
Cooling Method Natural
Storage Temperature -40C to 65C
Operating Humidity 15% to 85% (no condensation)
IP Rating IP30
Page 185 of 210
AU (Access Unit)
Product Description
AU is a part of Distributed Small Cell which connects to core network through IP interface and provides cellular signal for users. It is mainly used in small-to-medium sized scenarios. It actualizes ubiquitous coverage, improves its capability for data service, and offloads macro network by absorbing traffic of hotspots.
Product Features
• LTE 5MHz/10MHz/20MHz bandwidths
• Wireless resource management, including congestion control, UE access control, power control,
ICIC etc
• Various synchronization: air sniffer,1588V2 and GPS clock synchronization
• Flexible IP backhaul such as Ethernet, PON or PTN etc
• Support NMS management function, including remote software downloading upgrade, alarm, KPI
report etc.
• 1U size, easy installation on rack or wall mount
Technical Specification
System Specifications
Supported Users(LTE) 200 active users Or 400 RRC users
UMTS AU Feature Input Signal range: -12±5 dBm
Downlink Gain: 35dB Uplink Gain : 35dB
Interface
1 x RJ45 Port to WAN 1 x RJ45 Port to LAN
1 x RJ45 Port for Debug 1 x RJ45 Port to GPS
2 x SFP Port to CP 1 x SFP Port to WAN
1 x SFP Reserved
Power Switch
Mobility Handover and reselection with Macro Cell and other Small Cell
Synchronization Support 1588v2/GPS/A-GPS
Power, Mechanical, and Environmental Specifications
Dimension(H x W x D) 440mm x 370mm x 44mm(LTE)
482mm x 360mm x 44mm(UMTS)
Weight < 6.5kg
Power Supply External AC/DC adaptor 110/240-VAC
Power Consumption 45W
Mounting method Free standing, wall mounting
LAN Interface 100Mbps Ethernet port
LED Indicators POWER/RUN/LTE(UMTS) Traffic /GPS STATUS
Operating Temperature -5C to +40C
Operating Humidity 15% to 85%
IP Rating IP30
Page 186 of 210
5G Distributed Small Cell
Description
Comba 5G open-platform small cell is a small, low-power, distributed base station system, which
adopts digital technology and fiber infrastructure, providing 5G indoor coverage signal. Mainly used in
office buildings, shopping malls, university campuses, hospitals, hotels, parking and other indoor scenes,
to achieve accurate and deep coverage of indoor 5G signal and capacity.
The 5G open-platform small cell system consists of 5G Access Unit (AU), Switch Unit (SW) and
Distribution Point (DP). The AU and the SW are connected by optical fibers, and the SW and the DP are
connected by a hybrid power fiber cable, as shown in Figure 1.
Fig. 1 5G open-platform Small Cell System Architecture
Overall System Features
1) Support 5G data and voice service;
2) Support 5G NR wireless resource management and mobility management;
3) The Switch Unit supports 2 level of cascade;
4) Each Switch Unit can connect to 8 Distribution Points through hybrid power fibers cable
providing power and data to the Distribution Point;
5) Flexible cell splitting and combining without infrastructure change;
6) Support GPS, BDS (BeiDou Navigation Satellite System), 1588v2 clock synchronization;
7) Support equipment software remote upgrade, remote monitoring, topology rendering, alarm and
KPI reporting and other network management functions.
AU
SW1
DP1
SW2
DP8
4
3
2
1
Page 187 of 210
5G AU (Access Unit)
Technical specifications
5G Access Unit Appearance
Main Features
1) Support NSA and SA 5G deployment options;
2) Support 5G data and voice service;
3) Maximum 100MHz Channel Bandwidths;
4) Support access control, congestion control, power control and other wireless resource
management functions;
5) Support the connection of Switch Unit and Distribution Point to achieve the extension of
coverage;
6) Support mobile management functions such as switching and reselection between systems in
support system;
7) Support abnormal indication of equipment and control of access unit;
8) Support the configuration, query and upgrade of Switch Unit and Distribution Point;
9) Software remote download upgrade, alarm and KPI reporting and other network management
operation functions.
Page 188 of 210
Key Technical Specifications
Key technical specifications
Category Performance and specifications
Networking Capability
4 Switch Units are supported for star connection. Support for connecting 64 Distribution Points through 8 Switch Units.
3GPP Support 3GPP F40 and subsequent protocol upgrades;
User capacity Each cell supports 400 active users and 1200 RRC connected users
Maximum data throughput
Single cell downlink peak rate: 1.5Gbps @256QAM, 4 layers Single cell uplink peak rate: 285Mbps @64QAM, 2 layers
Cell Capacity 4 cells / 2T2R; 2 cells / 4T4R
Channel Bandwidth 50/60/80/100MHz
MIMO 2T2R, 4T4R
Synchronization Support GPS, BDS (BeiDou Navigation Satellite System), 1588v2 clock synchronization
Size Adopts 19 "standard frame, 1 U in height and 410 mm in depth.
Power supply DC-48 VDC (-40V~-57V) or AC 220V power supply
Environmental protection
Protection Level: IP20
Installation method Rack or wall mounted
Cooling Passive
Operation temperature
-5℃~+45℃
Operation relative humidity
15%-85% (no condensation)
Page 189 of 210
5G SW (Switch Unit)
Figure 3. Switch Unit appearance
Main Features
⚫ Support maximum 8 Distribution Points;
⚫ Power supply to Distribution Point by hybrid power fibers cable;
⚫ Supports second level cascade;
⚫ The combination of the upstream signal and the broadcasting of the downstream signal to each
Distribution Point.
⚫ Software remote download and upgrade, remote monitoring and other network management
operation functions;
⚫ LEDs status indication.
Technical Specifications
Key Technical specifications
Category Performance and specifications
System Processing Capability
Supporting access to 8 DP stations for each SW, system supporting 2 level of SW cascading.
Upstream signal aggregation
Supports the combination of the upstream IQ data of the connected DPs and the IQ data of the cascaded lower SW.
Downlink signal broadcasting
Broadcasting the downlink signal to the connected DPs and the cascaded lower SW
Remote power supply
Supporting remote power supply to DP via hybrid power fibers.
Cooling Passive
Installation method Rack or wall mounted
Volume < 12L
Weight < 10kg
Power supply AC 220V power supply input; supports - 48V DC power supply to Distribution Point
Environmental Protection
Protection Level IP30
Operation temperature
-5℃~+45℃
Operation relative humidity
15%-85%(no condensation)
Page 190 of 210
5G DP (Distribution Point):
5G Distribution Point appearance
Main Features
⚫ Supporting NR N41 and N78 bands
⚫ Support NR 50/60/80/100MHz channel bandwidth;
⚫ Support 2T2R, 4T4R;
⚫ LEDs indicating the status of equipment.
⚫ Network management operation functions such as remote download and upgrade of soft
ware, parameter setting, alarm and KPI reporting.
⚫ Plug and Play, supporting the remote power supply by hybrid power fibers and self-confi
guration function, fast commissioning and simple maintenance.
⚫ Support external Bluetooth module.
Technical Specifications
Key Technical specifications
Category Performance and Specifications
Operation Frequency
N41 N78
2515MHz~2675MHz 3400MHz~3600MHz
Channel bandwidth N41 N78
60MHz/80MHz/100MHz 50MHz/100MHz
MIMO N41 N78
2x2 4x4 / 2x2
Maximum transmit power
N41 N78
2*250mW 4*250mW / 2*250mW
Size < 2.5L
weight < 2.5kg
Power supply -48V DC Power Supply by Hybrid power fibers
Environmental Protection
Protection Level IP31
Installation method Ceiling or wall mount
Cooling Passive
Operation temperature
-5℃~+55℃
Operation relative humidity
15%~85% (no condensation)
Page 191 of 210
5G Indoor CPE
CP2600-IP, A30
5G NR Sub-6G n41/n77/n78n/79 LTE low band 5/8/18/19/20/26/28 LTE middle band 1/3/7/32/34/38/39/40/41 LTE high band 42 4 x 4 MIMO Up to 2.5Gbps download speed Wi-Fi 802.11 a/b/g/n/ac, 4 x 4 MIMO
Product Description CP2600-IP, A30 is a high-performance indoor customer-premises equipment(CPE)supporting 5G NR Sub-6G and 4G LTE radio interface. It works on 5G NR frequency bands from 700MHz to 5000MHz and LTE frequency bands from 700 MHz to 3600 MHz, delivering Gigabit peak downlink user throughput.
Supporting both 5G NR NSA and SA architecture, the CP2600-IP, A30 CPE enables mobile operators to rollout 5G network and deliver “fiber-like” Fixed Wireless Access (FWA) service rapidly. It is fully 3GPP compliant and supports advanced 5G and 4G NR radio features such as 4x4 MIMO, CA (Carrier Aggregation), and DL 256QAM. CP2600-IP, A30 CPE has built-in Wi-Fi router compliant with latest 802.11 standards, it also supports VoLTE services. Comba 5G NR CPE series supports remote configuration and management through Comba NMS (Network Management System) or operator’s ACS (Automatic Configuration Server).
Product Features
Support NSA and SA network
Integrated 4G and 5G NR antenna
Support TDD-LTE & FDD-LTE
Support DSS (Dynamic Spectrum Sharing) and optional LAA (Licensed Assisted Access)
Support TR-069 remote management protocol
Auto Band Selection
Support IPv4/6
Support IEEE802.11 a/b/g/n/ac
Provided VoLTE Interface
User-friendly operation indicator on top of device
Plug and play, zero touch commission through web user interface
Application
Page 192 of 210
Product Specification Radio Interface
Frequency Band
5G NR Sub 6G:
n41 (UL/DL: 2469 – 2690MHz)
n77 (UL/DL: 3300 – 4200MHz)
n78 (UL/DL: 3300 – 3800MHz)
n79 (UL/DL: 4400 – 5000MHz)
LTE-FDD Band1 (UL: 1920MHz – 1980MHz / DL: 2110MHz – 2170MHz) LTE-FDD Band3 (UL: 1710MHz – 1785MHz / DL: 1805MHz – 1880MHz) LTE-FDD Band5 (UL: 824MHz – 849MHz / DL: 869MHz – 894MHz) LTE-FDD Band7 (UL: 2500MHz – 2570MHz / DL: 2620MHz – 2690MHz) LTE-FDD Band8 (UL: 880MHz - 915MHz / DL: 925MHz - 960MHz) LTE-FDD Band18 (UL: 815MHz - 830MHz / DL: 860MHz - 875MHz) LTE-FDD Band19 (UL: 830MHz - 845MHz / DL: 875MHz - 890MHz) LTE-FDD Band20 (UL: 832MHz – 862MHz / DL: 791MHz – 821MHz) LTE-FDD Band26 (UL: 814MHz – 849MHz / DL: 859MHz – 894MHz) LTE-FDD Band28 (UL: 703MHz – 748MHz / DL: 758MHz – 803MHz) LTE-FDD Band32 (DL: 1452MHz – 1496MHz) LTE-TDD Band34 (UL/DL: 2010MHz – 2025MHz) LTE-TDD Band38 (UL/DL: 2570MHz – 2620MHz) LTE-TDD Band39 (UL/DL: 1880MHz – 1920MHz) LTE-TDD Band40 (UL/DL: 2300MHz – 2400MHz) LTE-TDD Band41 (UL/DL: 2496MHz – 2690MHz) LTE-TDD Band42 (UL/DL: 3400MHz – 3600MHz)
TRX 5G: 2T4R (n41), others 5G band: 1T4R 4G: 1T4R
Tx Power 5G: 26dBm LTE: 23dBm
MIMO 5G NR: DL: 4x4 MIMO; UL: 2x2 MIMO LTE: DL: 4x4 MIMO; UL: SISO
Modulation DL: 256QAM, UL: 64QAM
Power, Mechanical, and Environmental
Product Size (H x W x D) 200mm x 110mm x 110mm
Package Size (H x W x D) 290mm x 200mm x 190mm
Weight <2 kg
CPE Power Consumption <25W
Operating Temperature 0~45°C
Operating Humidity 0~95%
IP Rating IP 31
WI-FI
Standard IEEE 802.11 a/b/g/n/ac
Frequency Band 2.4GHz +5.8GHz
Tx/Rx Path 4T4R
Channel Bandwidth 20MHz & 40MHz & 80MHz
Built-in Antenna Specification
Item Operating Frequency Average Gain
Low Band 700 MHz ~ 960 MHz 1 dBi
Middle Band 1700 MHz ~ 2690 MHz 4 dBi
High Band 3300 MHz ~ 3800 MHz 4 dBi
Page 193 of 210
Software Feature
Language Settings: English
Router Mode
GUI based Web Configuration
DHCP Server
NAT
IPV4/IPV6 Dual Stack
TR-069
Firewall
VoLTE
Software Upgrade
Device Interface and Indicator
Interface Summary
1000/100/10Mbps ETH RJ45 LAN Port x 2 10000/1000/100/10Mbps ETH RJ45 LAN/WAN Port x 1 RJ11 Voice Interface x 1 2FF Standard SIM Card Slot x 1 Power DC Port x 1 External Antenna Port x 1 USB 3.0 Port x 1
Built-in Antenna Integrated Omni antennas
LED Power Indication 4G & 5G Signal Strength Wi-Fi Indication LED
Button WPS Button Reset Button
Power Supply (Adaptor)
Input range: 100~240V AC Output: 12V/3A DC
Page 194 of 210
Outdoor CPE
CP2600-OP, A10
TDD-LTE & FDD-LTE
Outdoor Pole/Wall Mounting
PoE Power Supply
Product Description
CP2600-OP, A10 is one of Comba LTE-CPE Series Product. It combines a robust IP-65 compliant enclosure with an LTE core supported Release 11 Category 6 along with an integrated high-gain dual polarization directional antenna. Easy implement LTE coverage extension. It can supply stable, fast, and easy network access for you.
Product Features
• Integrated High Gain Antenna
• Support PoE Power Supply
• Support Band Locking
• IP65 Structural Design
• Web-based User Interface & TR069 Protocol for remote management
Product Specification
LTE Standard
Mode TDD-LTE & FDD-LTE
Protocol Release11 Category6 & IPv4/v6 & DHCP
Date Rate (DL:UL=3:1, 20MHz)
Downlink Rate 200Mbps/Uplink Rate 10Mbps
Radio
Operating Frequency
LTE-FDD Band 2: (UL: 1850MHz-1910MHz DL: 1930MHz-1990MHz)
LTE-FDD Band 3: (UL: 1710MHz-1785MHz DL: 1805MHz-1880MHz)
LTE-FDD Band7: (UL: 2500MHz-2570MHz DL: 2620MHz-2690MHz)
LTE-FDD Band 28B: (UL: 718MHz-748MHz DL: 773MHz- 803MHz)
LTE-TDD Band42: (UL/DL: 3400MHz-3600MHz)
Antenna 1T2R, Dual-polarization (Vertical/ Horizontal)
Output Power 23dBm ± 2dBm
Carrier Aggregation Ability 35MHz FDD-LTE 2CC CA 40MHz TDD-LTE 2CC CA
Tx/Rx Path 1 Tx 2 Rx
Channel Bandwidth 5/10/15/20 MHz
Tx Power 23dBm +/- 2dBm
Rx Sensitivity -94dBm (20MHz@QPSK)
Page 195 of 210
Product Specification
Physical Specification
Total Dimension (L x W x H, approx) 260mm x 149mm x 72mm
Weight 0.7kg
Power Adapter Input 100 VAC - 240VAC, 50Hz - 60Hz Output 24V, 500mA
(PoE)
CPE Power Consumption < 7W
Operating Temperature -40°C to 55°C
Operating Humidity 0% to 95%
IP Rating IP65
Software Specification
Language Settings: English, Spanish and Portuguese
Language Settings: English, Spanish and Portuguese
Support NAT/Router mode Support NAT/Router mode
Support the http or https web server Support the http or https web server
PIN Management, SIM card Authentication
PIN Management, SIM card Authentication
Support multi-APN Support multi-APN
Support VPN Support VPN
Ipv6/Ipv4 dual stack Ipv6/Ipv4 dual stack
Support preferred band and frequency Support preferred band and frequency
Support NTP Synchronization Support NTP Synchronization
Device Interface
USIM USIM card slot
LAN1/POE Use for LAN connecting and power supplying
RST Restore factory setting
Page 196 of 210
CP2600-OP, A20
Middle Band 2/66 High Band 42/43/48 3GPP Release 12 Cat 15 Up to 80MHz Carrier Aggregation 4 x 4 MIMO Up to 800Mbps download speed
Product Description
CPE (Customer Premise Equipment) is the integrated wireless broadband access equipment. It combines a robust IP-65 compliant enclosure along with an integrated high-gain dual polarization directional antenna. Comba CP2600-OP, A20 CPE can provide high date rates with up to 80MHz carrier aggregation. It supports smart antennas with MIMO technology, combining advantaged RF design, and highly integrated software features and friendly web-based interface.
Product Features
• Support TDD-LTE & FDD-LTE
• Easy deployment for wall/pole mount
• Auto Band Selection
• Support IPv4/6
• Plug and play, zero touch commission
• Web-based friendly Interface
• Lightning protection
• TR069 NMS management
• High throughput for data access
Application Scenario
• Non-ideal for copper/fiber cable deployment due to ROI or roll-out difficulty • FWA Service • For rural coverage, high performance terminal is needed to improve network coverage and capacity
LTE Specification
CPE
PoE Injector
IDU(RJ45/RJ11/WiFi)
Internet
Core network
Page 197 of 210
Product Specification
Power, Mechanical, and Environmental Specifications
Product Dimension (W x H x D) 149mm x 260mm x 72mm
Package Size (W x H x D) 907mm x 350mm x 360mm
Weight <1Kg
Power Adapter Input 100 VAC~240VAC, 50Hz~60Hz
Output 24V, 500mA (PoE)
CPE Power Consumption Max. 12W
Operating Temperature -30~55°C
Operating Humidity 0~95%
IP Rating IP65
Software Specification
Language Settings: English
Support Bridge Mode/Router Mode
Support VPN in router mode
PIN Management
Support multi-APN +VLAN on bridge mode
IPV6/IPV4 dual stack at WAN
lock Cell, lock band and lock PLMN
Support NTP Synchronization
Mac and IP filter
Device Management Specification
Local Configuration Web based Configuration
Software Upgrade Full/Partial image upgrade
Local/Remote Upgrade
Diagnostics Support the ping and signaling trace
NMS Interface TR-069
Antenna Gain Specifications
Item Operating Frequency Average Gain(dBi)
Middle Band 1710MHz ~2700MHz 7
High Band 3400MHz ~3800MHz 7
*Horizontal plane half power beam-width: 60°Vertical plane half power beam-width: 60°
Standard 3GPP Release 12, Category 15
Frequency Band
TDD: Band42 (UL/DL: 3400MHz – 3600MHz)
TDD: Band43 (UL/DL: 3600MHz – 3800MHz)
TDD: Band48 (UL/DL: 3550MHz – 3700MHz)
FDD: B2 (UL:1850MHz – 1910MHz; DL:1930MHz – 1990MHz)
FDD: B66 (UL:1710MHz – 1780MHz; DL:2110MHz – 2200MHz)
Carrier Aggregation Ability Rx CA 20+20+20+20 MHz (DL 2x2 MIMO) Rx CA 20+20 MHz (DL 4x4 MIMO) Tx CA 20+20MHz (SISO)
TRX 2T4R
MIMO DL 4x4 MIMO UL 2x2 MIMO
Modulation DL 256QAM UL 64QAM
Channel Bandwidth 5/10/15/20 MHz
Tx Power per path 23dBm
Sensitivity -95dBm (10MHz@QPSK)
Max. Throughput 800Mbps
Page 198 of 210
CP2600-OP, A21
High Band 42/43/48 3GPP Release 12 Cat 15 Up to 80MHz Carrier Aggregation 4 x 4 MIMO Up to 580Mbps download speed
Product Description
CPE (Customer Premise Equipment) is the integrated wireless broadband access equipment. It combines a robust IP-65 compliant enclosure along with an integrated high-gain dual polarization directional antenna. Comba CP2600-OP, A21 CPE can provide high date rates with up to 80MHz carrier aggregation. It supports smart antennas with MIMO technology, combining advantaged RF design, and highly integrated software features and friendly web-based interface.
Product Features
• Support TDD-LTE
• Easy deployment for wall/pole mount
• Auto Band Selection
• Support IPv4/6
• Plug and play, zero touch commission
• Web-based friendly Interface
• Lightning protection
• High gain embedded antenna
• TR069 NMS management
• High throughput for data access
Application Scenario
• Non-ideal for copper/fiber cable deployment due to ROI or roll-out difficulty
• FWA Service
• For rural coverage, high performance terminal is needed to improve network coverage and capacity
CPE
PoE Injector
IDU(RJ45/RJ11/WiFi)
Internet
Core network
Page 199 of 210
Product Specification
LTE Specification
Standard 3GPP Release 12, Category 15
Frequency Band
LTE-TDD Band42 (UL/DL: 3400MHz – 3600MHz)
LTE-TDD Band43 (UL/DL: 3600MHz – 3800MHz)
LTE-TDD Band48 (UL/DL: 3550MHz – 3700MHz)
Carrier Aggregation Ability Rx CA 20+20+20+20 MHz (DL 2x2 MIMO) Rx CA 20+20 MHz (DL 4x4 MIMO) Tx CA 20+20MHz (SISO)
TRX 2T4R
MIMO DL 4x4 MIMO UL 2x2 MIMO
Modulation DL 256QAM UL 64QAM
Channel Bandwidth 5/10/15/20 MHz
Tx Power per path 23dBm
Sensitivity -96dBm (10MHz@QPSK)
Max. Throughput 580Mbps
Power, Mechanical, and Environmental Specifications
Product Dimension (W x H x D) 300mm x 300mm x103mm
Package Size(W x H x D) 390mm x 390mm x 180mm
Weight <2Kg
Power Adapter Input 100 VAC~240VAC, 50Hz~60Hz
Output 24V, 500mA (PoE)
CPE Power Consumption Max. 10W
Operating Temperature -30~55°C
Operating Humidity 0~95%
IP Rating IP65
Software Specification
Language Settings: English
Support Bridge Mode/Router Mode
Support VPN in router mode
PIN Management
Support multi-APN +VLAN on bridge mode
IPV6/IPV4 dual stack at WAN
lock Cell, lock band and lock PLMN
Support NTP Synchronization
Mac and IP filter
Device Management Specification
Local Configuration Web based Configuration
Software Upgrade Full/Partial image upgrade
Local/Remote Upgrade
Diagnostics Support the ping and signaling trace
NMS Interface TR-069
Antenna Gain Specifications
Item Operating Frequency Average Gain(dBi)
High Band 3400MHz ~3800MHz 13
*Horizontal plane half power beam-width: 60°Vertical plane half power beam-width: 20°
Page 200 of 210
5G Outdoor CPE CP2600-OP, A31 5G NR Sub-6G n41/n77/n78/ LTE low band 5/8/18/19/20/26/28 LTE middle band 1/3/7/32/34/38/39/40/41 LTE High band 42 4 x 4 MIMO Up to 2.5Gbps download speed
Product Description
CP2600-OP, A31 is a high-performance outdoor Customer-Premises Equipment(CPE)supporting 5G NR Sub-6G and 4G LTE modulation capacity. The device houses high-gain dual polarization directional antenna across 4x4 MIMO array. It works on 5G NR Sub-6G frequency bands from 700MHz to 3800MHz and LTE frequency bands from 700 MHz to 3600 MHz, delivering Gigabit peak downlink user throughput. Supporting both 5G NR NSA and SA architecture, the CP2600-OP, A31 CPE enables mobile operators to rollout 5G network and deliver “fiber-like” Fixed Wireless Access (FWA) service rapidly. It is fully 3GPP compliant and supports advanced 5G and 4G NR radio features such as 4x4 MIMO, CA (Carrier Aggregation) and DL 256QAM. Comba 5G NR CPE series supports remote configuration and management through Comba NMS (Network Management System) or operator’s ACS (Automatic Configuration Server).
Product Features
• Support NSA and SA network
• Integrated 4G and 5G NR antenna
• Support TDD-LTE & FDD-LTE
• Support DSS (Dynamic Spectrum Sharing) and optional LAA (Licensed Assisted Access)
• Support GPS Positioning for CPE location
• Support TR-069 remote management protocol
• Easy deployment for wall/pole mount
• Auto Band Selection
• Support IPv4/6
• Robust outdoor IP65 design with built-in lightning protection
• Plug and play, zero touch commission through web user interface
Application
• FWA for rural, suburban and urban household and SMEs where fixed broadband is
economically not feasible
• Meet high service requirements and best for rural coverage due to better link budget than indoor
CPE
Page 201 of 210
Product Specification
Radio Interface
Frequency Band
5G NR Sub 6G: n41 (UL/DL: 2469 – 2690MHz) n77 (UL/DL: 3300 – 4200MHz) n78 (UL/DL: 3300 – 3800MHz)
LTE-FDD Band1 (UL: 1920MHz – 1980MHz / DL: 2110MHz – 2170MHz) LTE-FDD Band3 (UL: 1710MHz – 1785MHz / DL: 1805MHz – 1880MHz) LTE-FDD Band5 (UL: 824MHz – 849MHz / DL: 869MHz – 894MHz) LTE-FDD Band7 (UL: 2500MHz – 2570MHz / DL: 2620MHz – 2690MHz) LTE-FDD Band8 (UL: 880MHz - 915MHz / DL: 925MHz - 960MHz) LTE-FDD Band18 (UL: 815MHz - 830MHz / DL: 860MHz - 875MHz) LTE-FDD Band19 (UL: 830MHz - 845MHz / DL: 875MHz - 890MHz) LTE-FDD Band20 (UL: 832MHz – 862MHz / DL: 791MHz – 821MHz) LTE-FDD Band26 (UL: 814MHz – 849MHz / DL: 859MHz – 894MHz) LTE-FDD Band28 (UL: 703MHz – 748MHz / DL: 758MHz – 803MHz) LTE-FDD Band32 (DL: 1452MHz – 1496MHz) LTE-TDD Band34 (UL/DL: 2010MHz – 2025MHz) LTE-TDD Band38 (UL/DL: 2570MHz – 2620MHz) LTE-TDD Band39 (UL/DL: 1880MHz – 1920MHz) LTE-TDD Band40 (UL/DL: 2300MHz – 2400MHz) LTE-TDD Band41 (UL/DL: 2496MHz – 2690MHz) LTE-TDD Band42 (UL/DL: 3400MHz – 3600MHz)
TRX 5G: 2T4R 4G: 1T4R (onlyB1/3/7/38/41) Others 4Gband: 1T2R
Tx Power 5G: 26dBm LTE: 23dBm
MIMO 5G: DL 4x4 MIMO; UL: 2x2 MIMO LTE: DL 4x4 MIMO (onlyB1/3/7/38/41), others 4G band: 2 x 2 MIMO ; UL: SISO
Modulation DL: 256QAM, UL: 64QAM
Power, Mechanical and Environmental
Product Size (H x W x D) 300mm x 300mm x 103mm
Package Size (H x W x D) 390mm x 390mm x 180mm
Weight <2kg
CPE Power Consumption <25W
Working Temperature -40~55°C
Operating Humidity 0~95%
IP Rating IP65
Software Feature
Language Settings: English
Bridge mode & Router mode
GUI based Web Configuration
DHCP Server
NAT
IPV4/IPV6 Dual Stack
TR-069
Firewall
Software Upgrade
Page 202 of 210
Built-in Antenna Specification
Item Operating Frequency Average Gain
Low Band 700 MHz ~ 960 MHz 3 dBi
Middle Band 1700 MHz ~ 2690 MHz 8 dBi
High Band 3300 MHz ~ 3800 MHz 10 dBi
* Remark: Tolerance is ± 1dBi.
Device Interface and Indicator
Interface Summary
1000/100/10 Mbps ETH RJ45 LAN Port x 1
Or 10000/1000/100/10 Mbps ETH RJ45 LAN Port x 1 (Optional)
2FF Standard SIM Card Slot x 1
Antenna Internal Antenna
LED
Power Indication
4G & 5G Signal Strength
SIM Indication
4G & 5G Link status LED
Button Reset button
Power Supply PoE DC 48V/0.6A
* Remark: 10000/1000/100/10 Mbps ETH RJ45 LAN port is for optional only and GA product is not support.
Page 203 of 210
Coverage Management System
CMS V8.19.4
Features
• Complete Management Platform forwireless enhancement
products (NE, Network Elements) including repeaters, DAS and
etc.
• Real time alarm collection with Alarm history log.
• Real-time or scheduled query for parameters configuration and
status update.
• Scheduled batch processing of commands.
• North Bound Interface (NBI) for integration with other EMS or NMS with SNMP (v2c, v3).
• Support SMS or IP-based communication mode. Optional interface to SMS Center (SMPPv3.3 or
3.4). Support alarm forwarding to cellular device handset via SMS or email.
• Optional Electronic Map Interface (need local eMap geographical data, SHP format).
• Support Browser – Server configuration over TCP/IP
• Running on standard Server platform. Utilizing proven Microsoft SQL database to achieve scalable,
reliable and secure architecture.
Functional Block Diagram
CMS consists of web server, application server, communication server and northbound interface which are software modules installed in one physical server hardware.
Terminal Terminal Terminal
Web Server
Application Server
Communication Server
Northbound Interface ( via SNMP trap)
Off-air Repeater
DAS ComFlex Microwave
Equipment RET
Antenna ...
Terminal
Firewall
Carrier Central NMS
Page 204 of 210
Specifications
CMS specifications may be varied depending on several factors such as hardware and software configuration levels and performance variance, NE Qty, communication mode, data transmission link performance, even running time and etc. Below specifications are typical values based on Comba operational experiences. These specifications may have some variance during actual operations.
CMS Capacity
NE Qty 10000, under recommended HW & SW configuration
NE data in database One year data
Concurrent login user Qty Maximum 50, recommended 15 for a better performance
CMS Performance
Data Packet Decoding Speed 10 per second
System Response Period 2s (normal operation), 5s (mass data processing)
Polling Speed 10000 NEs per hour, under SMSC communication mode 30000 NEs per hour, under PSD communication mode
Communication mode between CMS and monitored NEs
• SMS. With SMS mode, devices must be equipped with inside modems to send/receive SMS to/from
CMS; and CMS also must be equipped with a modem or directly connecting with SMS
Center/gateway to send/receive SMS to/from devices.
• Packet Switched Data (PSD), such as GPRS, CDMA 1x, HSDPA, etc. With PSD mode, devices
must be equipped with inside modems, and inserted with a PSD enabled SIM/UIM/USIM.
• Ethernet. With this mode, devices must be equipped with inside Network Interface Card (NIC).
• Circuit Switched Data (CSD) isn’t supported.
North-Bound Interface
Currently CMS supports below NBI to transfer CMS information to other EMS/NMS.
• SNMP Trap, Email, SMS for alarm forwarding.
• Timely Performance/Inventory file for performance/inventory management.
System Requirements
CMS Server Recommended Hardware Requirements
Processor Intel Xeon E7-2870
Memory 16GByte
Hard disk 500GByte
Network 2 x 100/1000M NIC
Serial Ports At least one available Serial Port
CMS Server Software Requirements
Operating System Windows Server 2016 64bit
Supported DatabaseApplications Microsoft SQL Server 2016
CMS Installation Requirements
For the installation of CMS, the CMS server should be open for remote access.
Page 205 of 210
CMSGUI
Page 206 of 210
Contact Information
Website: www.comba.com.cn Address: Shenzhou Road 10th, Guangzhou, China.