new cv series 2-position, 6-port valve€¦ · our new cv series 2-position, 6-port valve is...
TRANSCRIPT
2-position, 6-port valves have six ports on the stator and they are set in two positions. The valves dynamically alternates between two fluid paths without manually disconnecting plumbing. In Chromatography, these valves can be used for column switching, backflushing, sample enrichment, and other techniques.
Our new CV series 2-position, 6-port valve is available in stainless steel and PEEK versions. The rotor is supplied with a universal sealing material covering the full pH range (2-14). Compared to traditional valves, CV series valve features higher pressure,smaller footprint, and faster switching. You can get better performance, greater flexibility, and a more economical choice.
New CV Series 2-Position, 6-Port ValveFor UHPLC and IC system
Dimension comparison with other valve models
Model New CV Series TitanHP™ TitanHT™
Dimension 1.94 x 4.21 x 1.65 in.[49.28 x 106.81 x 41.96 mm]
1.95 x 4.87 x 2.40 in.[49.5 x 123.6 x 61.0 mm]
2.23 x 6.41 x 1.83 in.[56.6 x 162.8 x 46.6 mm]
PRESSURE
6,000-18,000 PSI
SMALLER
SIZE
FASTER
SWITCHING
Flow path of Two-Position, Six-Port Injection Valve
LOAD
6
54
3
21
Column
Pump
Waste
Sample
INJECT
6
54
3
21
Column
Pump
Waste
Sample
11
66
5544
33
22
Flow path of Two-Position, Six-Port Switching Valve
Position 1 Position 2
For ordering and technical support, please visit www.idex-hs.com or contact:
North America [email protected] | +1 800 426 0191 | +1 360 679 2528
Europe [email protected] | +49 1801 808 800 | +49 9377 9203-0
Asia [email protected] | North Asia +86 10 6566 9090 | +86 21 5241 5599
South Asia +91 22 66 43 55 50 | Southeast Asia & Oceania +65 6763 6633 | Japan +81 48 240 5750©2018 IDEX Health & Science LLC.
CV720-100 CV721-100 CV900-100
Liquid Contacts SPC-3, RPC-17 SPC-3, RPC-17 PEEK, RPC-10
Connections Accepts 10-32 male threaded fittings Accepts 10-32 male threaded fittings Accepts 10-32 male threaded fittings
Flow Passage Diameters
Stator: 0.20 mm (0.008”), Rotor Seal: 0.25 mm (0.010”) per groove
Stator: 0.20 mm (0.008”), Rotor Seal: 0.25 mm (0.010”) per groove
Stator: 0.28 mm (0.011”), Stator Face Seal: 0.23 mm (0.009”) per hole, Rotor Seal: 0.25 mm (0.01”) per groove)
Volume in Flow Passages
Stator: 0.08 µL per hole, Rotor Seal: 0.06 µL per groove
Stator: 0.08 µL per hole, Rotor Seal: 0.06 µL per groove Stator: 0.16 µL per hole, Rotor Seal: 0.06 µL per groove
Port to Port Volume 0.22 µL 0.22 µL, 0.23 µL (via MBB groove) 0.59 µL
Maximum Pressure 1240 bar (18,000 psi, 124 MPa ) 1240 bar (18,000 psi, 124 MPa ) 414 bar (6,000 psi, 41 MPa)
Specifications
Our valves are an integral part of advanced fluid-handling solutions for a wide range of analytical instrumentation and clinical diagnostic systems.
Other valve options
TitanHTTM TitanHPTM TitanEXTM TitanEZTM
Maximum Pressure 25,000 psi 6,000 psi 125 psi 75 psi
2-position, 6-port √ √ √ √
2-position, 10-port √ √ √
3-position, 7-port √ √
6-position, 7-port √ √ √ √
10-position, 11-port √ √ √
12-position, 13port √
8-position, 17-port √
Liquid ContactsUltraLife™, SupraLife™,
PEEK blended, SS, polyimide blended
DuraLife®, PEEK, SS, DuraLife® II（Ti, polyimide） RPC-7 UHMWPE, proprietary
coating, ceramic
Flow Passage Diameters 0.15-1.5 mm 0.10-0.30 mm 0.41-1.5 mm 1.5 mm
Connections 10-32, M4, 1/4-28 10-32, M4 TitanEX™fittingless connections 1/4-28