Everything an Ellis Boat should be – classic, sturdy, func-tional, beautiful, and built with pride. This amazing ves-

sel includes: A generator, heat & air, separate shower, freez-er with ice maker, fridge, 3-burner cooktop with oven, teak floors throughout, expansive seating and large-party dining setup with fold-out tables and Ellis Cantilevered Helm & Nav seating, Garmin electronics, shorepower, the Evolution Drive-shaft System, bowthruster, a powerful Yanmar diesel engine with a skeg-protected 5-blade prop and rudder. The Ellis Boat Company crew, including the designer Donald Ellis, are ex-tremely proud of this yacht. Call Ellis Boat Company directly to schedule an appointment to see this vessel in our show-room. (207) 244-9221 (x6) or Email: sales@ellisboat.com

ELLIS 36 EXPRESS CRUISER

Length overall 40’ 5”Length on deck 35’10”Length waterline 33’ 4”Maximum beam 13’ 2”Draft (keel) 3’ 10”Displacement 16,000-17,000 lbs.Diesel fuel 2 x 105 gallonsPotable water 2 x 50 gallons Wastewater 1 x 36 gallons

ENGINE: Yanmar 530hp Cruising speed 12-20 knotsMax speed 26 knots

New Ellis 36 Express CruiserAvailable direct from Ellis Boat Company, Inc.

ELLIS 36 HARDTOP EXPRESS CRUISER SPECIFICATIONS ELLIS 36 HULL No. 32

HULL: • Semi-displacement with integral fiberglass skeg protecting the shaft, prop & rudder • 1° deadrise at transom • ISO NPG gelcoat with blister-resistant vinylester resin • High-tech composite with stitched biaxial E-Glass construction for superior strength • Vacuum bagged ATC Core-Cell® structural foam core • Stitched biax-ial structural E-Glass reinforced stringer system • Gelcoat finished bilges for ease of maintenance • Fiberglass swim platform with solid teak surface • Undermount coated aluminum swim ladder • Linear Polyurethane boot stripe • Metal-free biocide antifouling bottom paint system • Teak Transom with Transom Door • Awlgrip Corinthian Blue, Red Boot, Black Bottom

DECK: • ISO NPG gelcoat with vinylester resin • High-tech composite with stitched biaxial E-Glass construction for superior strength • Vacuum bagged ATC Core-Cell® structural foam core • Gelcoat non-skid surface • Teak Guards, Rails, and Side-stripe

ENGINE SYSTEM: • 530-hp Yanmar diesel engine • Oil catch basin under engine • 2.5:1 ZF Model 280 transmis-sion • Sealed 2” stainless steel Evolution Quiet Drive shaft system • 26” 5-blade magnesium-bronze propeller • 80-amp, 12-volt alternator • Groco 2” raw water intake strainer • Engine air intake through aft cockpit grills • White gelcoat finished engine room • 2-inch Soundown™ sound insulation on main bulkhead, under all floor panels & hatches • All access hatches lined with acoustical gasketing • Engine compartment cooling through side-mounted, molded fiberglass, dorads • All thru-hulls isolated with solid glass to insure integrity of Core-Cell® core • Ball valve style silicon bronze seacocks with double hose clamps

FUEL SYSTEM: • (2) ABYC, NMMA & USCG approved 105-gallon baffled aluminum fuel tanks • 900 Series Racor 30-micron primary fuel filter/water separator • Yanmar 2-micron secondary fuel filter/water separator • (2) 2” 316 polished stainless steel diesel deck fills • USCG approved, fire-resistant fuel hoses with double hose clamps

STEERING SYSTEM: • Marine Hydraulics Hydro-Slave® power steering system • 316 stainless steel rudder (1½” diameter rudder post) • Sidepower® SP55 electric bow thruster with helm control

FORWARD CABIN: • 7-foot 6-inchV-berth with 6” covered cushions with memory foam & breathable top layer • Teak V-berth trim • Cypress sheathing surrounding V-berth • Drop-in storage compartments under V-berth cushions • Teak drawers and drop-down lockers under V-berth • Chain locker forward with teak louvered door • Large cedar lined hanging locker with 3 shelves, hanger pole & teak louvered door • Fiberglass floor with custom gelcoat non-skid surface • Leather grained headliner with teak trim • (2) Bomar hatches with self-contained Ocea-nAir® sun shades and screens • 3.8 cubic foot insulated floor locker with drain between V-berths • 5.25 cubic foot insulated floor locker with drain in center of cabin floor • Solid Teak Cabin Floor • V-berth filler

GALLEY: • Molded fiberglass counter with teak fiddle rail and trim • Hand-polished 304 stainless steel double sink with washerless Moen faucet • Teak drawers and storage lockers below counter • Teak trimmed sliding door stor-age cabinet • Top Loading Freezer with Ice Maker • 1.2 cubic foot stainless steel convection microwave • 3-burner electric range • (2) teak pot locker drawers • Hot and cold pressurized water • Nova Kool® 12-volt DC/120-volt AC refrigerator with freezer compartment • Custom Ellis designed teak plate and bowl storage rack • Custom Ellis designed teak mug and spice rack • Melamine dinnerware (choice of colors): (8) 12oz mugs, (8) 8” salad plates, (8) 10” dinner plates, (8) 16oz soup bowls • (8) 14oz Makrolon tumblers • (2) 3.3qt, (2) 1.5qt, (2) 0.6qt food canisters, and salt & pepper mills • Teak towel ring

HEAD: • Teak sliding door • Molded fiberglass counter with teak fiddle rail and trim • 13” hand-polished 304

stainless steel sink with washerless Moen faucet • Teak drawers and storage lockers below counter • Teak trimmed sliding door storage cabinet • Teak framed mirror above sink cabinet • Separate molded fiberglass shower with seat • Alsons shower head & mixing valve • Bi-folding ½” clear acrylic shower door • Hot and cold pressurized water • Separate shower sump • (2) stainless steel towel bars

SHELTER: • Express Cruiser hardtop with gelcoat non-skid surface and teak supports • Acoustical headliner with teak trim • (2) Bomar hatches with self-contained OceanAir® sun shades and screens • Stamoid side curtains & three-panel backdrop with eisenglass panels • Teak cap rail • Port and starboard Ellis Cantilevered Hydraulic Seats™ with covered cushions (convert to 2 settees or 2 twin bunks in conjunction with stern seats) • (2) Teak trimmed sliding door storage lockers • Teak companionway doors and cover • Removable teak companionway stairs • (2) 30” x 48” folding teak tables mounted on port and starboard cabin sides • (3) Large (26½” x 61”) engine room hatches w/gas struts, 4” diameter stainless compression latches/hinges (removable hatch irons create a single 86” x 61” opening) • (25” x 25”) shaft access and storage hatch with gas struts, 4” diameter stainless steel com-pression latch and hinges • (3) front powder coated aluminum opening windshields • (3) 2-speed, self-parking, pantograph windshield wipers with washers • (2) powder coated aluminum side windows • Fiberglass floor with gelcoat non-skid surface • Linear Polyurethane side stripe matching hull color • Solid Teak installed on all floors • Custom Seating with pull-out boarding steps

HELM STATION: • Enclosed cabinet with teak top and fiberglass instrument insert • Teak trimmed electrical, electronics and hydraulic access panel • Side arm cabinet for hydraulic seats and additional electronics • Ellis ad-justable teak and hand-polished stainless steel footrest • Single lever control • Engine control panel: o Start/Stop control o Tachometer w/hour meter o Engine temperature o Engine oil pressure o Voltmeter o Water temp and oil pressure alarm • Lighted Ritchie 4½” Binnacle compass • Windlass and air horn controls • Operators electrical control panel • Stazo 24” stainless steel destroyer wheel • Ellis designed “Pump Running Indicator Light System”

NAVIGATION STATION: • Enclosed cab-inet with top storage compartment with hinged teak cover • Teak trimmed electrical access panel • Side arm cabinet for hydraulic seats, additional electronics & air condition-ing grill • Ellis adjustable teak and hand-pol-ished stainless steel footrest

COCKPIT: • (2) teak folding stern seats with cushions (convert to twin bunks in con-junction with Ellis Cantilevered Hydraulic Seats™) • (3) Large (25½” x 32½”) lazaret hatches with gas struts, 4” diameter stainless steel compression latches and hinges (remov-

able hatch irons create a single 84” x 25½” opening) • (2) teak trimmed sliding door storage lockers • Fiberglass floor with gelcoat non-skid surface • SHURflo PRO Blaster™ 3.5 GPM high-pressure pump supplies salt water to bow and cockpit faucets • Additional salt and fresh water faucets in cockpit • Cockpit shower with recessed mixing valve • Solid Teak installed on all floors • Transom Door • Custom Seating with pull-out boarding steps

HARDWARE: • 1-inch diameter type 316 stainless steel bow rail • (2) 1-inch diameter type 316 stainless steel hand rails on cabin top • (2) 1-inch diameter type 316 stainless steel hand rails on shelter top • (2) 1-inch diameter type 316 stainless steel hand rails on front corners of shelter • (4) 10” 316 polished stainless steel cleats (2 amidships, 2 aft) • (1) 7” 316 polished stainless steel bow bitt • (2) 6” 316 polished stainless steel skene bow chocks • (2) 316 polished stainless steel fender eyes amidships • Polished stainless steel flagpole holder, ferruled teak flag staff and 3’x5’ U.S. flag • Fiberglass bow pulpit with 316 hand-polished stainless steel anchor roller & windlass • Polished

Electronics Package Ellis 36 Hull # 32

Stainless anchor with 150’ of 5/16” chain and 150’ of 5/8” nylon • (6) polished 316 stainless steel opening port lights with angled spigots and screens • High impact Teak guards and rails with solid polished stainless steel half oval • Added numerous teak and stainless handrails

WASTE DISPOSAL: • 36-gallon holding tank with overboard discharge macerator pump • 1½” Scandvik polished stainless steel deck pump out plate • 12-volt DC marine head w/12-volt vacuum generator • All gray water drain-age through 2 isolated thru hulls

FRESH WATER SYSTEM: • (2) 50-gallon water tanks • 12-gallon hot water tank • FDA approved color-coded (blue cold/red hot) Whale semi-rigid pipe system • 3.8 GPM 12-volt DC SHURflo water pump • 1½” polished stainless steel deck fill plate

120-VOLT AC ELECTRICAL SYSTEM: • (2) 30-amp 120-volt AC shore power outlets • (2) 50’, 30-amp, shore power cords • Battery charger (20-amp, charges 3 battery banks simultaneously) • Illuminated AC circuit breaker panel with flush breakers and digital monitor • 120-volt GFCI protected outlets (2) in galley, (1) in head and (2) in shelter • 8-kw Fischer Panda Generator • 16kBtu Cruisair Reverse Cycle Air Conditioning

12-VOLT DC ELECTRICAL SYSTEM: • (1) 4D dedicated engine starting battery • (2) 8D deep cycle house bat-teries • USCG & ABYC approved polyethylene battery boxes • Heavy-duty battery switch with parallel capabilities for emergency starting • Illuminated DC circuit breaker panel with flush breakers and digital monitor • DC sub panel on sidearm at helm • 12-volt DC outlets at helm and navigation stations • 12-volt DC dual trumpet air horn • USCG approved running lights on pulpit • USCG approved 360° masthead light • (3) 750 GPH bilge pumps; (1) located forward of the main bulkhead, (1) in engine compartment just aft of engine, (1) auxiliary pump located just forward of engine. • AGM Batteries

LIGHTING: • 5½” stainless steel dome lights (2) over V-berth, (2) in galley, (1) in head, (1) in shower, (2) in shel-ter, (1) above companionway (includes red lens to preserve night vision) • Vanity light on mirror in head • (4) engine room lights • (4) cockpit lights • Spotlight with helm control

WOOD FINISH: • All interior and exterior teak finished with Epifanes® Satin (in cabin) or Gloss Varnish.

OTHER: • (4) 5/8”, three strand nylon dock lines • (4) 8” x 20” inflatable fenders with Polartec® covers • (1) boat hook • (6) adult life jackets, (1) flotation cushion • (2) 5lb class A, B and C fire extinguishers, (1) in cabin, (1) in shelter • (1) first aid kit • (1) flare kit • (1) signaling device