new generation charging 5 for smaller batteries year … · art technology and is perfect for...
TRANSCRIPT
CTEK XS 0.8
0.8A
5 YEAR
WARRANTY
5 YEAR
WARRANTY
5 YEAR
WARRANTY
5 YEAR
WARRANTY
NEW GENERATION CHARGING FOR SMALLER BATTERIESCTEK XS 0.8The XS 0.8 is CTEK’s smallest 12 V charger. It offers state of the art technology and is perfect for charging smaller 12 V batteries that can be found in motorcycles, jet skis, ATVs and lawnmowers. It is also suitable for maintenance charging “normal- sized” batteries such as car batteries. The unique display allows the user to follow the entire charging process. The XS 0.8 is a compact and fully automatic 6-step charger for 12 V batteries from 1.2–32 Ah and is suitable for maintenance charging up to 100 Ah. The XS 0.8 is IP65 classified (splash and dust proof), delivers 0.8 A and is designed to protect vehicle electronics. It is non-sparking, reverse polarity protected and short-circuit proof. The XS 0.8 is delivered with 5-year warranty.
TECHNICAL DATACHARGING VOLTAGE 14.4 V
CHARGING CURRENT Max 0.8 A
TYPE OF CHARGER 6 step, fully automatic charging cycle
TYPE OF BATTERY 12 V lead-acid batteries
BATTERY CAPACITY 1.2–32 Ah, up to 100 Ah for maintenance
INSULATION IP65 (splash and dust proof)
AUTO
Fully automatic for optimal charging
For all lead-acid batteries
FULLY CHARGED BATTERY
Maintenance charging
www.ctek.com
0.8A
CTEK XS 0.8CTEK COMFORT CONNECT–eyelet M6
CTEK COMFORT CONNECT–clamp
CTEK XS 0.8
2001
5645
B EN
• Fully automatic charging and maintenance in 6 steps maximizes battery life and performance
• Numerous accessories simplify using the same charger for multiple batteries
• Water-resistant so that the solution could be taken to the problem even if it rains or snows
• Patented maintenance charge for a unique combination of maxi-mized life and performance
• Patented desulphation that extends the battery life• No sparks, short-circuit proof and reverse-polarity protected for
untroubled usage
CONNECT AND FORGET
12V/0.8A
XS 0.8
11
2
3
1. Connect the charger to the battery.
2. Connect the charger to the wall socket. — Power-on lamp lights
3. … and ready.
1 STEP 1 DESULPHATIONPulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity.
2 STEP 2 BULKCharging with maximum current until approximately 80 % battery capacity.
3 STEP 3 ABSORPTION, READY TO USE Charging with declining current to maximize up to 100 % battery capacity.
4 STEP 4 ANALYSETests if the battery can hold charge. Batteries that cannot hold charge may need to be replaced.
5 STEP 5 FLOAT, FULLY CHARGEDMaintaining the battery voltage at maximum level by providing a constant voltage charge.
6 STEP 6 PULSE, MAINTENANCE CHARGING Maintaining the battery at 95–100 % capacity. The charger monitors the battery voltage and gives a pulse when necessary to keep the battery fully charged.
GUARANTEED QUALITY WITH CTEKCTEK offers a 5 year warranty on all professional chargers. CTEK cus-tomer support is available to answer any questions related to charging and CTEK chargers. Safety, simplicity and flexibility characterizes all prod-ucts and solutions developed and sold by CTEK. CTEK supply chargers to more than 60 countries throughout the world. CTEK is also a reliable OEM supplier to many of the world’s most prestigious car and motorcycle manufacturers. Contact customer support: [email protected]
CTEK’s UNIQUE 6 STEP CHARGING
Customer support: [email protected]