new microsoft word document (2)

LTE Frequently Asked Questions What is LTE?

What is goal of LTE?

What speed LTE offers?

What is LTE Advanced?

What is LTE architecture?

What is EUTRAN?

What are LTE Interfaces?

What are LTE Network elements?

What are LTE protocols & specifications?

What is VoLGA?

What is CS Fallback in LTE?

How does LTE Security works?

What is IP Multimedia Subsystem (IMS)?

How does measurements work in LTE?

What is Automatic Neighbour Relation?

How does Intra E-UTRAN Handover is performed?

How does policy control and charging works in LTE?

What is SON & how does it work in LTE?

How does Network Sharing works in LTE?

How does Timing Advance (TA) works in LTE?

How does LTE UE positioning works in E-UTRAN?

How many operators have committed for LTE?

What is Single Radio Voice Call Continuity (SRVCC)?

How does Location Service (LCS) work in LTE network?

How does Lawful Interception works in LTE Evolved Packet System?

What is carrier aggregation in LTE-Advanced?

What is Relay Node and how does Relaying works in LTE-Advanced?

What is LTE?

LTEi (Long Term Evolution) is initiated by 3GPPi to improve the mobile phone standard to cope with

future technology evolutions and needs.

Login or register to post comments

What is goal of LTE?

The goals for LTE include improving spectral efficiency, lowering costs, improving services, making

use of new spectrum and reformed spectrum opportunities, and better integration with other open

standards.


What speed LTE offers?

LTE provides downlink peak rates of at least 100Mbit/s, 50 Mbit/s in the uplink and RAN (Radio

Access Network) round-trip times of less than 10 ms.


What is LTE Advanced?

LTE standards are in matured state now with release 8 frozen. While LTE Advanced is still under

works. Often the LTE standard is seen as 4G standard which is not true. 3.9G is more acceptable for

LTE. So why it is not 4G? Answer is quite simple - LTE does not fulfill all requirements of ITU 4G

definition.

Brief History of LTE Advanced: The ITU has introduced the term IMT Advanced to identify mobile

systems whose capabilities go beyond those of IMT 2000. The IMT Advanced systems shall provide

best-in-class performance attributes such as peak and sustained data rates and corresponding

spectral efficiencies, capacity, latency, overall network complexity and quality-of-service

management. The new capabilities of these IMT-Advanced systems are envisaged to handle a wide

range of supported data rates with target peak data rates of up to approximately 100 Mbit/s for high

mobility and up to approximately 1 Gbit/s for low mobility.

See LTE Advanced: Evolution of LTE for more details.


What is LTE architecture?

The evolved architecture comprises E-UTRAN (Evolved UTRAN) on the access side and EPC

(Evolved Packet Core) on the core side.

The figure below shows the evolved system architecture


What is EUTRAN?

The E-UTRAN (Evolved UTRAN) consists of eNBs, providing the E-UTRA user plane

(PDCP/RLC/MAC/PHY) and control plane (RRC) protocol terminations towards the UE. The eNBs

are interconnected with each other by means of the X2 interface. The eNBs are also connected by

means of the S1 interface to the EPC (Evolved Packet Core), more specifically to the MME (Mobility

Management Entity) by means of the S1-MME and to the Serving Gateway (S-GW) by means of the

S1-U.


What are LTE Interfaces?

The following are LTE Interfaces : (Ref: TS 23.401 v 841)

S1-MME :- Reference point for the control plane protocol between E-UTRAN and MME.

S1-U:- Reference point between E-UTRAN and Serving GW for the per bearer user plane

tunnelling and inter eNodeB path switching during handover.

S3:- It enables user and bearer information exchange for inter 3GPP access network mobility

in idle and/or active state.

S4:- It provides related control and mobility support between GPRS Core and the 3GPP

Anchor function of Serving GW. In addition, if Direct Tunnel is not established, it provides the

user plane tunnelling.

S5:- It provides user plane tunnelling and tunnel management between Serving GW and

PDN GW. It is used for Serving GW relocation due to UE mobility and if the Serving GW

needs to connect to a non-collocated PDN GW for the required PDN connectivity.

S6a:- It enables transfer of subscription and authentication data for

authenticating/authorizing user access to the evolved system (AAA interface) between MME

and HSS.

Gx:- It provides transfer of (QoS) policy and charging rules from PCRF to Policy and

Charging Enforcement Function (PCEF) in the PDN GW.

S8:- Inter-PLMN reference point providing user and control plane between the Serving GW in

the VPLMN and the PDN GW in the HPLMN. S8 is the inter PLMN variant of S5.

S9:- It provides transfer of (QoS) policy and charging control information between the Home

PCRF and the Visited PCRF in order to support local breakout function.

S10:- Reference point between MMEs for MME relocation and MME to MME information

transfer.

S11:- Reference point between MME and Serving GW.

S12:- Reference point between UTRAN and Serving GW for user plane tunnelling when

Direct Tunnel is established. It is based on the Iu-u/Gn-u reference point using the GTP-U

protocol as defined between SGSN and UTRAN or respectively between SGSN and GGSN.

Usage of S12 is an operator configuration option.

S13:- It enables UE identity check procedure between MME and EIR.

SGi:- It is the reference point between the PDN GW and the packet data network. Packet

data network may be an operator external public or private packet data network or an intra

operator packet data network, e.g. for provision of IMS services. This reference point

corresponds to Gi for 3GPP accesses.

Rx:- The Rx reference point resides between the AF and the PCRF in the TS 23.203.

SBc:- Reference point between CBC and MME for warning message delivery and control

functions.


What are LTE Network elements?

eNB

eNB interfaces with the UE and hosts the PHYsical (PHY), Medium Access

Control (MAC), Radio Link Control (RLC), and Packet Data Control

Protocol (PDCP) layers. It also hosts Radio Resource Control (RRC)

functionality corresponding to the control plane. It performs many

functions including radio resource management, admission control,

scheduling, enforcement of negotiated UL QoS, cell information

broadcast, ciphering/deciphering of user and control plane data, and

compression/decompression of DL/UL user plane packet headers.

Mobility Management Entity

manages and stores UE context (for idle state: UE/user identities, UE mobility state, user security

parameters). It generates temporary identities and allocates them to UEs. It checks the authorization

whether the UE may camp on the TA or on the PLMN. It also authenticates the user.

Serving Gateway

The SGW routes and forwards user data packets, while also acting as the mobility anchor for the

user plane during inter-eNB handovers and as the anchor for mobility between LTE and other 3GPP

technologies (terminating S4 interface and relaying the traffic between 2G/3G systems and PDN

GW).

Packet Data Network Gateway

The PDN GW provides connectivity to the UE to external packet data networks by being the point of

exit and entry of traffic for the UE. A UE may have simultaneous connectivity with more than one

PDN GW for accessing multiple PDNs. The PDN GW performs policy enforcement, packet filtering

for each user, charging support, lawful Interception

and packet screening.


What are LTE protocols & specifications?

In LTE architecture, core network includes Mobility Management Entity (MME), Serving Gateway

(SGW), Packet Data Network Gateway (PDN GW) where as E-UTRAN has E-UTRAN NodeB (eNB).

See LTE protocols & specifications for specification mappings.

Protocol links are as below

Air Interface Physical Layer

GPRS Tunnelling Protocol User Plane (GTP-U)

GTP-U Transport

Medium Access Control (MAC)

Non-Access-Stratum (NAS) Protocol

Packet Data Convergence Protocol (PDCP)

Radio Link Control (RLC)

Radio Resource Control (RRC)

S1 Application Protocol (S1AP)

S1 layer 1

S1 Signalling Transport

X2 Application Protocol (X2AP)

X2 layer 1

X2 Signalling Transport


What is VoLGA?

VoLGA stands for "Voice over LTE via Generic Access". The VoLGA service resembles the 3GPP

Generic Access Network (GAN). GAN provides a controller node - the GAN controller (GANC) -

inserted between the IP access network (i.e., the EPS) and the 3GPP core network.

The GAN provides an overlay access between the terminal and the CS core without requiring

specific enhancements or support in the network it traverses. This provides a terminal with a 'virtual'

connection to the core network already deployed by an operator. The terminal and network thus

reuse most of the existing mechanisms, deployment and operational aspects.

see VoLGA - Voice over LTE via Generic Access for more details.


What is CS Fallback in LTE?

LTE technology supports packet based services only, however 3GPP does specifies fallback for

circuit switched services as well. To achieve this LTE architecture and network nodes require

additional functionality, this blog is an attempt to provide overview for same.

In LTE architecture, the circuit switched (CS) fallback in EPS enables the provisioning of voice and

traditional CS-domain services (e.g. CS UDI video/ SMS/ LCS/ USSD). To provide these services

LTE reuses CS infrastructure when the UE is served by E UTRAN.

See Understanding CS Fallback in LTE for more details.


How does LTE Security works?

The following are some of the principles of 3GPP E-UTRAN security based on 3GPP Release 8

specifications:

The keys used for NAS and AS protection shall be dependent on the algorithm with which

they are used.

The eNB keys are cryptographically separated from the EPC keys used for NAS protection

(making it impossible to use the eNB key to figure out an EPC key).

The AS (RRC and UP) and NAS keys are derived in the EPC/UE from key material that was

generated by a NAS (EPC/UE) level AKA procedure (KASME) and identified with a key

identifier (KSIASME).

The eNB key (KeNB) is sent from the EPC to the eNB when the UE is entering ECM-

CONNECTED state (i.e. during RRC connection or S1 context setup).

See LTE Security Principles for more details.


What is IP Multimedia Subsystem (IMS)?

The 3GPP IP Multimedia Subsystem (IMS) technology provides an architectural framework for

delivering IP based multimedia services. IMS enables telecom service providers to offer a new

generation of rich multimedia services across both circuit switched and packet switched networks.

IMS offers access to IP based services independent of the access network e.g. wireless access

(GPRS, 3GPP’s UMTS, LTE, 3GPP2’s CDMA2000) and fixed networks (TISPAN’s NGN)

IMS defines a architecture of logical elements using SIP for call signaling between network elements

and Provides a layered approach with defined service, control, and transport planes. Some of IMS

high level requirements are noted below:

The application plane provides an infrastructure for the provision and management of services,

subscriber configuration and identity management and defines standard interfaces to common

functionality.

The IMS control plane handles the call related signaling and controls transport plane. Major element

of control plane is the Call Session Control Function (CSCF) , which comprises Proxy-CSCF (P-

CSCF), Interrogating-CSCF (I-CSCF) and Serving-CSCF (S-CSCF). The CSCF (Call/Session

Control Function) is essentially a SIP server.

The IMS transport plane provides a core IP network with access from subscriber device over

wireless or wireline networks.


How does measurements work in LTE?

In LTE E-UTRAN measurements to be performed by a UE for mobility are classified as below

Intra-frequency E-UTRAN measurements

Inter-frequency E-UTRAN measurements

Inter-RAT measurements for UTRAN and GERAN

Inter-RAT measurements of CDMA2000 HRPD or 1xRTT frequencies

See Measurements in LTE E-UTRAN for details.


What is Automatic Neighbour Relation?

According to 3GPP specifications, the purpose of the Automatic Neighbour Relation (ANR)

functionality is to relieve the operator from the burden of manually managing Neighbor Relations

(NRs). This feature would operators effort to provision.

Read Automatic Neighbour Relation in LTE for more details.


How does Intra E-UTRAN Handover is performed?

Intra E-UTRAN Handover is used to hand over a UE from a source eNodeB to a target eNodeB

using X2 when the MME is unchanged. In the scenario described here Serving GW is also

unchanged. The presence of IP connectivity between the Serving GW and the source eNodeB, as

well as between the Serving GW and the target eNodeB is assumed.

The intra E-UTRAN HO in RRC_CONNECTED state is UE assisted NW controlled HO, with HO

preparation signalling in E-UTRAN.

Read LTE Handovers - Intra E-UTRAN Handover for more details.


How does policy control and charging works in LTE?

A important component in LTE network is the policy and charging control (PCC) function that brings

together and enhances capabilities from earlier 3GPP releases to deliver dynamic control of policy

and charging on a per subscriber and per IP flow basis.

LTE Evolved Packet Core (EPC) EPC includes a PCC architecture that provides support for fine-

grained QoS and enables application servers to dynamically control the QoS and charging

requirements of the services they deliver. It also provides improved support for roaming. Dynamic

control over QoS and

charging will help operators monetize their LTE investment by providing customers with a variety of

QoS and charging options when choosing a service.

The LTE PCC functions include:

PCRF (policy and charging rules function) provides policy control and flow based charging

control decisions.

PCEF (policy and charging enforcement function) implemented in the serving gateway, this

enforces gating and QoS for individual IP flows on the behalf of

the PCRF. It also provides usage measurement to support charging

OCS (online charging system) provides credit management and grants credit to the PCEF

based on time, traffic volume or chargeable events.

OFCS (off-line charging system) receives events from the PCEF and generates charging

data records (CDRs) for the billing system.

Refer following whitepapers for more details.

Introduction to Evolved Packet Core

Policy control and charging for LTE networks

Quality of Service (QoS) and Policy Management in Mobile Data Networks


What is SON & how does it work in LTE?

Self-configuring, self-optimizing wireless networks is not a new concept but as the mobile networks

are evolving towards 4G LTE networks, introduction of self configuring and self optimizing

mechanisms is needed to minimize operational efforts. A self optimizing function would increase

network performance and quality reacting to dynamic processes in the network.

This would minimize the life cycle cost of running a network by eliminating manual configuration of

equipment at the time of deployment, right through to dynamically optimizing radio network

performance during operation. Ultimately it will reduce the unit cost and retail price of wireless data

services.

See Self-configuring and self-optimizing Networks in LTE for details.


How does Network Sharing works in LTE?

3GPP network sharing architecture allows different core network operators to connect to a shared

radio access network. The operators do not only share the radio network elements, but may also

share the radio resources themselves.

Read Network Sharing in LTE for more.


How does Timing Advance (TA) works in LTE?

In LTE, when UE wish to establish RRC connection with eNB, it transmits a Random Access

Preamble, eNB estimates the transmission timing of the terminal based on this. Now eNB transmits

a Random Access Response which consists of timing advance command, based on that UE adjusts

the terminal transmit timing.

The timing advance is initiated from E-UTRAN with MAC message that implies and adjustment of

the timing advance.

See Timing Advance (TA) in LTE for further details.


How does LTE UE positioning works in E-UTRAN?

UE Positioning function is required to provide the mechanisms to support or assist the calculation of

the geographical position of a UE. UE position knowledge can be used, for example, in support of

Radio Resource Management functions, as well as location-based services for operators,

subscribers, and third-party service providers.

See LTE UE positioning in E-UTRAN for more details.


How many operators have committed for LTE?

List of operators committed for LTE has been compiled by 3GAmericas from Informa Telecoms &

Media and public announcements. It includes a variety of commitment levels including intentions to

trial, deploy, migrate, etc.

For latest info visit http://ltemaps.org/


What is Single Radio Voice Call Continuity (SRVCC)?

Along with LTE introduction, 3GPP also standardized Single Radio Voice Call Continuity (SRVCC) in

Release 8 specifications to provide seamless continuity when an UE handovers from LTE coverage

(E-UTRAN) to UMTS/GSM coverage (UTRAN/GERAN). With SRVCC, calls are anchored in IMS

network while UE is capable of transmitting/receiving on only one of those access networks at a

given time.

See Evolution of Single Radio Voice Call Continuity (SRVCC) for more details.


How does Location Service (LCS) work in LTE network?

In the LCS architecture, an Evolved SMLC is directly attached to the MME. The objectives of this

evolution is to support location of an IMS emergency call, avoid impacts to a location session due to

an inter-eNodeB handover, make use of an Evolved and support Mobile originated location request

(MO-LR) and mobile terminated location request MT-LR services.

Release 9 LCS solution introduces new interfaces in the EPC:

SLg between the GMLC and the MME

SLs between the E-SMLC and the MME

Diameter-based SLh between the HSS and the HGMLC

For details read LCS Architecture for LTE EPS and LTE UE positioning in E-UTRAN


How does Lawful Interception works in LTE Evolved Packet System?

3GPP Evolved Packet System (EPS) provides IP based services. Hence, EPS is responsible only

for IP layer interception of Content of Communication (CC) data. In addition to CC data, the Lawful

Interception (LI) solution for EPS offers generation of Intercept Related Information (IRI) records

from respective control plane (signalling) messages as well.

See Lawful Interception Architecture for LTE Evolved Packet System for more details.


What is carrier aggregation in LTE-Advanced?

To meet LTE-Advanced requirements, support of wider transmission bandwidths is required than the

20 MHz bandwidth specified in 3GPP Release 8/9. The preferred solution to this is carrier

aggregation.

It is of the most distinct features of 4G LTE-Advanced. Carrier aggregation allows expansion of

effective bandwidth delivered to a user terminal through concurrent utilization of radio resources

across multiple carriers. Multiple component carriers are aggregated to form a larger overall

transmission bandwidth.

See Carrier Aggregation for LTE-Advanced for more details.


What is Relay Node and how does Relaying works in LTE-Advanced?

For efficient heterogeneous network planning, 3GPP LTE-Advanced has introduced concept of

Relay Nodes (RNs). The Relay Nodes are low power eNodeBs that provide enhanced coverage and

capacity at cell edges. One of the main benefits of relaying is to provide extended LTE coverage in

targeted areas at low cost.

The Relay Node is connected to the Donor eNB (DeNB) via radio interface, Un, a modified version of

E-UTRAN air interface Uu. Donor eNB also srves its own UE as usual, in addition to sharing its radio

resources for Relay Nodes.

new microsoft word document (2)

Documents