RFTJ Yellow

C=20 M=33 Y=100 K=3 C=11 M=24 Y=97 K=0 C=0 M=11 Y=97 K=0 C=0 M=3 Y=37 K=0

New Products 2015

Markal.com • Tempil.com

PRO-LINE® XT Liquid paint marker for rough surfaces and extreme durability• Engineered for continuous and highly-visible marking on

rough, rusty, and dirty surfaces• Enamel paint for extreme durability and enhanced wear-,

weather-, and chemical-resistance• Available in 14 bold, fast-drying colors for immediate han-

dling and reduced downtime

97250 z White*97251 z Yellow*97252 z Red*97253 z Black*97254 z Blue*97255 z Green*97256 z Orange*97257 z Silver*97258 z Light Green*97259 z Light Blue*97260 z Gold97261 z Pink*97262 z Purple97263 z Brown*

PRO-LINE® HT Liquid paint marker for high temperature resistance• Engineered with PrismaLock™ technology for long-lasting

colors up to 1,800°F (982°C)• Marking range: -50°F to 150°F (-46°C to 66°C)• Maximum mark readability (no color) - White - 2,100°F (1,148°C) - Yellow - 2,100°F (1,148°C) - Black - 2,200 °F (1,204°C) - Blue - 2,000°F (1,093°C)

97301 z White*97302 z Yellow*97303 z Black*97305 z Blue*

*Indicates that this marker is low in chlorides, halogens, and sulfurs for low corrosion requirements

DURA-INK® 5 Permanent ink marker with extended micro tip• Extended nose is ideal for marking through holes and hard to

reach areas• Industrial-strength ink is smear- and water-resistant for

longer lasting marks• Mark size: 1/32” (1 mm)

96520 z Black

DURA-INK® 20 Retractable permanent ink marker with fine bullet tip • One-handed, push button operation eliminates lost caps and

prevents ink dryout• Fast-drying, wear and water-resistant formula for long-

lasting marks• Industrial-grade fine bullet tip will not spread or mush• Mark size: 1/16” (1.5 mm)

96575 z Black96576 z Red

DURA-INK® WashAway™ Wash removable ink marker for temporary marking• Fast-drying ink formula completely washes off all

non-porous surfaces• High-visibility marks are water and detergent removable

without ghosting or residue• Compact design for improved comfort and control• Mark size: 1/8” (3 mm) or 5/16” (8 mm)

96301 z Pink96302 z Blue96303 z Green

LP99R00211 1/2015

Quik Stik® Mini Fast-drying solid paint in twist-up holder • Fast-drying, vibrant paint marks dry in 5 to 7 minutes• Marks on virtually any surface; wet, smooth, rough, or hot• Solid paint marker advances and retracts by turning

twist-up knob• Marking range: 0°F to 392°F (-18°C to 200°C)

61126 z White61127 z Yellow61128 z Red61129 z Black

Carpenter’s Chalk For temporary line marking• Advanced color and opacity for improved mark visibility• Finer in texture for cleaner, more durable marks• Saves time and money compared to refillable reels

80530 z White80531 z Blue

Chalk Polishing Block For roller grinding and extrusion• Specially formulated for use in rubber roller maintenance and

assisting in faster and easier extrusion processes • Finer in texture and richer in color• Offered in two sizes: Large 2.5” x 4.5” x 9” (6.4 cm x 11.4 cm

x 22.9 cm) and small 1.5” x 2” x 9” (3.8 cm x 5 cm x 22.9 cm)

80540 z White – Large80541 z Red – Large80542 z Blue – Large80543 z White – Small

Fluorescent Scanning Chalk For lumber grade marking • High performance formula, suitable either in the woods or in

the mills where electronic mark readers are used• Long-lasting marks on wet or frozen timber/lumber• Finer in texture and richer in color• Better lay-down capability

80560 z Fluorescent Magenta80561 z Fluorescent Orange80562 z Fluorescent Yellow Green80564 z Fluorescent Green80565 z Fluorescent Purple

Estik™ Electronic surface thermometer• Micro-thermocouple technology for instant display of

the surface temperature• Accurate to +/-2% of surface temperature• Ergonomic rubberized grip and single-button operation

for ease of use• °C or °F selectable temperature readout• Temperature range: 32° to 999°F (0° to 537°C)

24290 Estik 24251 Estik – NIST Certified 24252 Estik Thermocouple Band Replacement

Bloxide® Weldable primer • Aluminum-based formula allows for ability to strike arc

during welding without removal of primer• Versatile, weldable primer to protect metals

during extended periods of storage. • Unique primer will not contaminate weld

for X-ray quality results• Heat resistant up to 800°F (427°C)

24100 1 Gallon24101 55 Gallon Drum 24102 15 Gallon Pail24104 12 oz Aerosol Can

LA-CO Industries creates specialized products that are RIGHT FOR THE JOB™, and will help professional users get the job done right. From general marking tools to markers made especially for the unique needs of your job, and from temperature indicators to industrial coatings and chemicals, you’ll find the products that will always perform to your profes-sional standards.

MARKALNo other marker manufacturer has the quality, the precision, and the range of products for profession-als and general industry as Markal. Made in the USA, and manufactured to deliver outstanding results, Markal is the industry’s marking standard.

TEMPILFrom Tempilstik® to Bloxide, Tempil is known world-wide as the performance leader in temperature indicating, monitoring, and coatings. Professionals depend on Tempil’s precision and technical

capabilities, making each Tempil product exactly RIGHT FOR THE JOB™.

Markal.com • Tempil.com