NEW QUANTEC FUNCTIONS AND ENHANCEMENTSAvailable July 2010

Allows infrared transmitters and neck pendants to be programmed with a unique User ID (1 to 255) and a 16 character custom name

User ID information shown on all relevant displays (Attack > Nurse Smith). Alternatively, the system can be set up so User ID is logged in Surveyor only

USER ID

Can be used to highlight staff training issues (i.e. too many attacks on one person may indicate an aggressive member of staff)

Initial programming requires a QT423 configurator (authorised users can update names at a Quantec controller)

Allows a number of other new Quantec functions to be implemented…..

Allows Quantec to ‘track’ the course of an Attack generated via an infrared staff attack transmitter with User ID

Quantec analyses the transmitter’s ID and only shows the last activated receiving device (i.e. the current location of the attack) on Displays

A full record of the attack, showing all activated receivers and the order in which they were triggered, is logged in Surveyor (can be used as evidence in courts, etc).

ATTACK TRACK FUNCTION

Allows nursing/security staff entering rooms to log their Attendance via IR call points/ceiling receivers

Call points momentarily flash to indicate a registered call (Attendance calls will NOT show on displays but will be logged in Surveyor)

If programmed with a User ID, managers can monitor which staff are performing their duties (helps prevent staff sleeping on the job, etc)

STAFF ATTENDANCE PENDANT

Typical transmitting range = 10m line-of-sight (IR) and 60m (RF)

Replaceable 12V 8LR50 battery provides 6-12 months operation (battery low indication provided in Surveyor if User ID is used)

Can be reconfigured to generate a Standard, Presence/Reset toggle, Help Required or Reset call using a QT423 configurator.

Allows patients to remotely trigger Standard calls via IR call points/ceiling receivers and radio receivers

Ideal for individual bedrooms and/or communal areas such as lounges and gardens

Can be programmed with a User ID and custom name so staff can see which patient is calling

PATIENT NECK PENDANT

Typical transmitting range = 10m line-of-sight (IR) and 60m (RF)

Includes an anti-ligature lanyard and confidence LED for call confirmation and battery low indication (battery low indication also provided in Surveyor if User ID is used)

Can be reconfigured to generate a Presence/Reset toggle, Help Required or Reset call using a QT423 configurator.

Allows slave devices such as ceiling pulls in bathrooms or shower rooms to generate a distinct ‘Ensuite’ call level

Ensuite calls are flagged at the same call level as Help Required calls

Ensuite devices must be connected to an appropriately programmed slave connector on a new-style Quantec call point…

ENSUITE CALL LEVEL

Now have programmable ‘CALL’ buttons, ‘RESET’ buttons, remote sockets (if fitted) and two programmable slave inputs

CALL buttons, remote sockets and slave inputs can be programmed via a QT432 configurator to generate specific call levels (standard, ensuite, help required, emergency or attack)

PROGRAMMABLE CALL POINTS

For example, a call point’s ‘CALL’ button can be set to make an Emergency call on its initial activation, a slave ceiling pull can make an Ensuite call, a slave panic button can make an Attack call and a tail call lead can make a Help Required call, or any other combination

RESET buttons can also now be programmed so they bypass the Presence call level.

CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK

QUANTEC NETWORK

INITIAL PRESS =CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK

OPTIONALREMOVALOF PRESENCE

CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK

x3

CALL, HELP REQUIRED EMERGENCY, ATTACK, PRESENCE, RESET OR ATTENDANCE(VIA TRANSMITTER)

x3

CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK

x3

QUANTEC NETWORK

CALL, HELP REQUIRED EMERGENCY, ATTACK, PRESENCE, RESET OR ATTENDANCE(VIA TRANSMITTER)

x3

QuickTime™ and aTIFF (Uncompressed) decompressor

are needed to see this picture.

CALL, ENSUITEHELP REQUIRED EMERGENCYOR ATTACK

x3

Allows engineers (or authorised users) to assign a custom site name of up to 16 characters to Quantec displays

Names can be programmed into the system via the QT707 programming software or at a Quantec Controller

CUSTOM-SITE NAME

Quantec’s call messages can now be routed depending on:-

• Area of origin (26 options/cap codes)

• Type of call (6 options/cap codes, including Presence and Reset)

• Day/night (2 options/cap codes).

MORE ADVANCED PAGING

Paging displays will show the location of the call, the level of the call and (if relevant) the User’s ID

An optional re-paging function is also available

Cap code set up is via the QT707 Programming tools

QuickTime™ and aTIFF (Uncompressed) decompressor

are needed to see this picture.

A new feature allowing call messages to be directed to third-party DECT telephone systems

Compatible with MEP (Multitone) or ESPA protocols

Output options are as per Quantec’s updated paging functions.

DECT capability can be added to existing Quantec systems by updating the Quantec Controller

Programming is via the QT707 Programming tools

Multitone can advise on compatibility/interfacing issues

DECT CAPABILITY

QuickTime™ and aTIFF (Uncompressed) decompressor

are needed to see this picture.

Can now be interfaced and take data from up to four Quantec controllers via 4 serial ports. (All controllers must be located within 30m of each other).

Now logs user ID data, Attendance calls and transmitters/pendants with low batteries.

IMPROVED SURVEYOR SOFTWARE

Corridor Displays now include a slightly louder buzzer (plus a link allowing the buzzer to be disabled).

Call points with call follower sounders can now be programmed so their beepers operate in day mode/locally and night mode/globally.

Master IR Receivers now have a programmable slave input (for the optional connection of slave panic buttons, etc)

OTHER ENHANCEMENTS

PRODUCT

MODIFICATIONS

CONTROLLERModified to support• User ID• DECT/Pager enhancements• Custom site name• Ensuite calls• Attendance

CALL POINTSModified to support• Programmable functions• Additional slave input• IR User ID• IR Low battery• IR Attendance• IR Presence toggle

MASTER IRModified to support• IR User ID• IR Low battery• IR Attendance• IR Presence toggle• Additional slave input

DISPLAYModified to support• Custom site name • User ID• Beeper disable• Ensuite Call level

BIG DISPLAY INTERFACEModified to support• Custom site name• User ID• Ensuite Call level

ATTACK TRANSMITTERModified to support• User ID• Attendance

QuickTime™ and aTIFF (LZW) decompressor

are needed to see this picture.

RADIO RECEIVERModified to support• User ID• Attendance• Low battery

PROGRAMMING TOOLSModified to support• Custom site name• User ID• Ensuite Call level• DECT/Pager support• Buzzer disable• Presence in night mode

CONFIGURATOR TOOLSModified to support• User ID• Attendance

SURVEYORModified to support• User ID• Attendance• Low battery• Data from up to four controllers