new siemens hvac products

The HVAC industry is constantly changing. Siemens is continuously expanding its commercial HVAC componentproduct portfolio to give you the most competitive advantage in the marketplace. This document contains newproducts not originally included in the Siemens HVAC Components and Controls Catalog Edition 8.0. Pleasereach out to your local Authorized Distribution Partner to hear more information on the newest Siemens products.To locate an authorized distributor, contact a Siemens Building Technologies representative at: 1.888.593.7876

VALVE PORTFOLIO UPDATES

Threaded ½” to 2” Normally Open & NormallyClosed Pressure Independent Control ValvesThree Function, One Streamlined Device

Siemens Pressure IndependentControl Valves integrates acontrol valve, adjustable flowlimiter, and automatic pressureregulator. The ½” to 1¼” valveshave a 2.5, 5, or 5.5 mm strokeand work with the SSD serieselectric actuators. The 1½” to 2”normally open valves have a 15mm stroke & work with the SAYseries electronic actuators. SAYactuators for 1½” to 2” normallyopen valves can also be set fornormally closed operation(reverse acting). The SSD andSAY Actuators require a 24 Voltpower supply to provide floatingor 0-10 Vdc control.

Flanged 2.5” to 6” Spring Return & Non-SpringReturn Pressure Independent Control Valves (PICV)Optimize Large Hydronic Systems

Siemens Pressure IndependentControl Valves integrates acontrol valve, adjustable flowlimiter, and automatic pressureregulator. The 2.5” and 3” valveshave a 20 mm stroke, and workwith the SAX series non-springreturn and SQV spring returnseries electric valve actuators.The 4”, 5” and 6” valves have a40 mm stroke and use the SAVnon-spring return electronicvalve actuators and the SQVspring return electronic valveactuators. The actuators requirea 24 Vac/dc operating voltageand accept floating, 0 to 10 Vdc,or 4 to 20 mA control signals.

Low Profile ½” & ¾” Two-Way Ball ValveAssembliesLess is More!

The same Siemens ball valveyou came to know and lovereceived a makeover. The ½” &¾” 2-way valve profile is now 3”shorter and 1” narrower makingthis compact solution morepracticable for tighterapplications. The best thing ispart number don’t change!

Weather Shield For 599 Series Ball ValveAssembliesProtection Against The Elements

Siemens 599-10080 Ball ValveWeather Shield providesprotection from the elements inoutdoor installations. Whenused with the weather shield,ball valve assemblies are ULlisted to meet the NEMA Type3R rating against rain, sleet, anddamage from external iceformation.

Distributed By: M&M Control Service, Inc. www.mmcontrol.com/siemens.php 800-876-0036 847-356-0566

VALVE PORTFOLIO UPDATES

Six-Way ½” & 1” Ball Valve AssembliesTwo for One

The Siemens 6-way control ballvalve is suited for use in heated/ chilled ceiling applications.This special design replacesfour conventional valves andrespective actuators in a 4-pipeheated/chilled ceiling. Sincethere is only actuator, itoccupies only one data point.Less effort for installation,commissioning and cabling aswell as decreased spacerequirements reduce thecomplexity of the plant andresult in lower costs.

SAS Actuators For 599 Powermite MT Series ValvesOut With The Old, In With the New

Siemens SAS Series Actuator isa direct replacement for theretired SQS series actuator. TheSAS series actuator require a 24Vac supply and can receive a 0-10 Vdc or 0-1000 Ohm controlsignal to proportionally control avalve, or receive a floatingcontrol signal to provide floatingcontrol. This actuator isdesigned to work withPowermite MT Series Valveswith a 7/32” (5.5 mm) stroke.These valves can be used inliquid and low pressure steamservice applications.

Refrigeration ValvesFor Safety Refrigerants

The MVL661 series refrigerantvalves are hermetically sealed,2-port valves used formodulating control of chillersand heat pumps in conjunctionwith PolyCool for superheatcontrol or Climatix for chillercontrol. The M2FP03GXmodulating pilot valve is used tocontrol a chiller’s main valves, orfor direct control of low kvsvalues. The M3FB..LX.. seriesmodulating control valve is usedfor hot-gas applications forcapacity control of refrigerationunits and heat recoverysystems.

ACTUATORS PORTFOLIO UPDATES

LA546 Laboratory Electronic Actuators___________Ideal Critical Environment Air Valve And Damper Actuation

Siemens Laboratory ElectronicActuator is designed to work inairflow applications where rapidmovement of a damper actuatoris required to control thepressurization of a space.Typical applications includefume hood damper actuationand room pressurization control.

NEMA Type 4X Weather Shield Kit For OpenAir™Damper ActuatorsProtection Against The Elements

Siemens ASK75.7U NEMAType 4X rated weather shield kitprovides protection against theelements for damper actuatorsinstalled in outdoor locations.The weather shield is easy toinstall and contains allnecessary hardware forinstallation and mounting with awide range of control damperactuators.


VARIABLE FREQUENCY DRIVE PORTFOLIO UPDATES

BT300 NEMA Type 3RExpanding The BT300 Family

Siemens NEMA Type 3R BT300and BT300 with bypass arerecent additions to the BT300Variable Frequency Drives(VFDs) family. Manufactured foroutdoor locations, the standard3R rating cabinet providesprotection from rain to theenclosed VFD and electricalcontrol components. NEMA 3RBT300s are available in 208–240V up to 60HP and 380–480Vup to 125HP.

BT300 Emergency InventorySame Day Shipping Available For Your Convenience

Siemens factory now stocksselect BT300 VFDs intended foremergency shipments, next dayair. NEMA Type 1 drive only areavailable in 208–240V from 1 to10 HP and 380–480V from 3 to50 HP. Similarly, NEMA Type 1drives with electronic bypass areavailable in 208–240V from 1 to10 HP and 380–480V from 3 to50 HP.

BTE-SW-KIT Electronic Bypass Override Switch KitConventional Override Capability In A Critical Failure Situation

Siemens override switch kitcontains the parts needed toinstall an Electronic BypassOverride Switch on an existingBT300 BTE Bypass unit. Thisoverride switch gives thecapability to override the BT300when necessary andmechanically switch the drivebetween standard/defaultoperation mode and overridemode. This is used as a finalsolution to run a motor if thedrive is unable to functionproperly or a critical failureoccurs in both the drive andelectric bypass.

Line & Load ReactorsProtect Your VFD And Extend Your Motor Life

Siemens Line reactors areinstalled when a drive is locatedclose to a building's incomingpower source where incomingspikes and other transients maydamage the drive due to lowimpedance. Installing a linereactor at the input of each drivehelps to counteract line spikingand nuisance faults causing thedrive to shut down. SiemensLoad reactors are installed onthe drive output and will dampenovershoot peak voltage, reducemotor heating & audible noise. Aload reactor helps to extend thelife of the motor & increase themotor to drive distance.

THERMOSTAT PORTFOLIO UPDATES

RDG Series Commercial Fan Coil RoomThermostats ___________Digital Thermostats For The Light Commercial Markets

RDG110U RDG160TU

RDG110U

Siemens new digital RDGthermostat supports a widerange of applications, & featureadditional inputs and outputs tocustomize applications. TheRDG110U supportsconventional, heat pump, fancoil & chilled ceiling applicationswhile the RDG160TU addsflexible scheduling support andECM fan output. The RDG400features single duct VAVapplications with aux heat,floating/modulating damperactuator, and valve control. TheRDG series replace the RAA,RAB, RCC, RCU, RDU, RDF, &RDX legacy thermostat families.

RDY2000 & RDY2000BN Commercial Heat Pump &Conventional Room ThermostatA Room Thermostat Designed for the American HVAC System

RDY2000

RDY2000BN

The Siemens RDY2000 standalone model & the RDY2000BNcommunicating model arecommercial room thermostatsdesigned for use with room topunits and split HVAC systemsthat require ON/OFF control of24Vac circuits. It includes allnecessary timers, delays andlockouts to protect themechanical equipment andprevent inefficient operation.The RDY2000 can interface withremote sensors and devices tocompletely manage all aspectsof room comfort includingtemperature, humidity, and airquality.


SENSOR PORTFOLIO UPDATES

MD-BMS & MD-BMED Power Meter KitsPerfect For Tenant Submetering And Data Center Monitoring

Siemens MD submeteringdevice is designed to providereal time, accurate electricitymetering to enable greatercontrol over energy costs. Themeter captures kWh/kW energyand demand data with up to 75relevant energy parameters fordiagnostics and monitoring onthree-phase or single-phasecircuit installations. Its flexibility,size, and ease-of-use make it anideal tool for gathering detailedconsumption information incommercial, industrial,governmental, and retailenvironments. The MD-BMSand MD-BMED Power Metersdirectly replace the MD-BMPower Meters.

QAA/QFA/QPA Series 2200/3200 Room SensorsRoom Sensors For BACnet Terminal Equipment Controllers

Siemens Series 2200/3200singular or combination roomsensors provide accuratemeasurement of temperature,humidity, and/or CO2, which canserve as input for HVAC control,monitoring, and energymanagement functions. Theroom sensors are now availableto all distribution channelsincluding all variants (includingwireless) of the followingfamilies: QAA22xx TemperatureSensors, QFA32xx Humidity +Temperature Sensors, andQPA22xx 3-in-1 Sensors(Temp/RH/CO2). The series2200/3200 room sensorsdirectly replace the series2300/3300 room sensors andseries 1000 room sensors.

QXA2602 Condensation Monitor With RemoteSensorAvoid Damage Due To Condensation In Tight Places

Siemens QXA2602 is a newaddition to the QXA2600Condensation Monitors Seriesfor use in chilled beam / chilledceiling applications. TheQXA2600 Series CondensationMonitors are used to avoiddamage due to condensation onchilled ceilings in HVACinstallations. The QXA2602 is avariant of the existing QXA2601,but includes a remote sensingelement for easier installation intight spaces. The QXA2602includes a remote sensingelement with mounting screwsand a 60” cable for attachmentto main housing.

Room Pressure Monitors, Room ConditionMonitors, Multi-Room Monitor StationMaintain The Proper Pressurization In Critical Environments

Siemens Room PressureMonitor (RPM) and SiemensRoom Condition Monitor(SRCM) are designed for criticallow differential pressureapplications that requirestringent pressure monitoringand alarming. The units can beconfigured to monitor positive ornegative pressure in protectedenvironments and hospitalisolation rooms per CDCguidelines. Siemens Multi-RoomMonitoring Station (MRMS),installed in a central location,provide remote viewing andalarm monitoring for up to 8rooms or critical spacesequipped with a RPMs orSRCM.


BUILDING AUTOMATION FIELD LEVEL CONTROLS

MS/TP Point Pickup Module___________Affordably Incorporate Peripheral Devices Into a BAS

Siemens Point Pickup Modules(PPM) are expansion I/Odevices that communicate on aBACnet network allowing theBuilding Automation Station topick up a cluster of remotepoints over MS/TP. The PPMfamily leverages the MS/TPnetwork to extend the reach ofany BTL-listed BACnet BuildingControllers application program.Each Universal Input can beconfigured for analog or digitalinput. Input/Output type isconfigured by writing to BACnetobject properties.

Standalone POL220 Series Economizer ControllerA Simple Solution for Your Ventilation & Energy Saving Needs

The POL220 EconomizerController is used with rooftopunits and air handling uniteconomizer dampers to bring infresh air without the need formechanical cooling allowingunconditioned outside air to coola building. The result is “Free”cooling and energy savings. Thefree cooling air determination isbased on customer temperatureand humidity selections as wellas optional Demand ControlVentilation (DCV) strategies withCO2 level selection. Thisstandalone economizer systemis perfect for new and retrofitinstallations that do not have abuilding automation system.


new siemens hvac products

Documents