new we866c3-p linux companion rf test user guide · 2019. 12. 17. · we866c3-p linux companion rf...

[01.2

01

7]

Mod. 0805 2017-01 Rev.6

WE866C3-P Linux Companion RF Test User Guide

1VV0301640 Rev. 0 –2019-12-09


1VV0301640 Rev. 0 of 28 2019-12-09

SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE

NOTICE

While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein. The information in this document has been carefully checked and is believed to be reliable. However, no responsibility is assumed for inaccuracies or omissions. Telit reserves the right to make changes to any products described herein and reserves the right to revise this document and to make changes from time to time in content hereof with no obligation to notify any person of revisions or changes. Telit does not assume any liability arising out of the application or use of any product, software, or circuit described herein; neither does it convey license under its patent rights or the rights of others.

It is possible that this publication may contain references to, or information about Telit products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that Telit intends to announce such Telit products, programming, or services in your country.

COPYRIGHTS

This instruction manual and the Telit products described in this instruction manual may be, include or describe copyrighted Telit material, such as computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Telit and its licensors contained herein or in the Telit products described in this instruction manual may not be copied, reproduced, distributed, merged or modified in any manner without the express written permission of Telit. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit, as arises by operation of law in the sale of a product.

COMPUTER SOFTWARE COPYRIGHTS

The Telit and 3rd Party supplied Software (SW) products described in this instruction manual may include copyrighted Telit and other 3rd Party supplied computer programs stored in semiconductor memories or other media. Laws in the Italy and other countries preserve for Telit and other 3rd Party supplied SW certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any copyrighted Telit or other 3rd Party supplied SW computer programs contained in the Telit products described in this instruction manual may not be copied (reverse engineered) or reproduced in any manner without the express written permission of Telit or the 3rd Party SW supplier. Furthermore, the purchase of Telit products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent applications of Telit or other 3rd Party supplied SW, except for the normal non-exclusive, royalty free license to use that arises by operation of law in the sale of a product.


1VV0301640 Rev. 0 of 28 2019-12-09

USAGE AND DISCLOSURE RESTRICTIONS

I. License Agreements

The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.

II. Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without prior written permission of Telit

III. High Risk Materials

Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life Support, or Weapons Systems (High Risk Activities"). Telit and its supplier(s) specifically disclaim any expressed or implied warranty of fitness for such High Risk Activities.

IV. Trademarks

TELIT and the Stylized T Logo are registered in Trademark Office. All other product or service names are the property of their respective owners.

V. Third Party Rights

The software may include Third Party Right software. In this case you agree to comply with all terms and conditions imposed on you in respect of such separate software. In addition to Third Party Terms, the disclaimer of warranty and limitation of liability provisions in this License shall apply to the Third Party Right software.

TELIT HEREBY DISCLAIMS ANY AND ALL WARRANTIES EXPRESS OR IMPLIED FROM ANY THIRD PARTIES REGARDING ANY SEPARATE FILES, ANY THIRD PARTY MATERIALS INCLUDED IN THE SOFTWARE, ANY THIRD PARTY MATERIALS FROM WHICH THE SOFTWARE IS DERIVED (COLLECTIVELY “OTHER CODE”), AND THE USE OF ANY OR ALL THE OTHER CODE IN CONNECTION WITH THE SOFTWARE, INCLUDING (WITHOUT LIMITATION) ANY WARRANTIES OF SATISFACTORY QUALITY OR FITNESS FOR A PARTICULAR PURPOSE.

NO THIRD PARTY LICENSORS OF OTHER CODE SHALL HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND WHETHER MADE UNDER CONTRACT, TORT OR OTHER LEGAL THEORY, ARISING IN ANY WAY OUT OF THE USE OR DISTRIBUTION OF THE OTHER CODE OR THE EXERCISE OF ANY RIGHTS GRANTED UNDER EITHER OR BOTH THIS LICENSE AND THE LEGAL TERMS APPLICABLE TO ANY SEPARATE FILES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.


1VV0301640 Rev. 0 of 28 2019-12-09

APPLICABILITY TABLE

PRODUCTS

WE866C3-P


1VV0301640 Rev. 0 of 28 2019-12-09

CONTENTS

NOTICE….. ..................................................................................................... 2

COPYRIGHTS ................................................................................................ 2

COMPUTER SOFTWARE COPYRIGHTS ...................................................... 2

USAGE AND DISCLOSURE RESTRICTIONS ............................................... 3

APPLICABILITY TABLE ................................................................................ 4

CONTENTS .................................................................................................... 5

FIGURE LIST ................................................................................................. 7

1. INTRODUCTION .......................................................................... 8

Scope ........................................................................................... 8

Audience....................................................................................... 8

Contact Information, Support ........................................................ 8

Text Conventions .......................................................................... 9

Related Documents .................................................................... 10

2. HARDWARE TEST SETUP ........................................................ 11

Prerequisites ............................................................................... 11

3. SOFTWARE INSTALLATION .................................................... 12

Software Requirements .............................................................. 12

3.1.1. QDART Installation ..................................................................... 12

4. WLAN TEST PROCEDURE ....................................................... 16

Setup QRCT for WLAN ............................................................... 16

QRCT WLAN Tx Test Procedure ................................................ 19

4.2.1. WLAN Tx Settings for 2.4GHz Band, CH. 6, 802.11b rates ......... 20

4.2.2. WLAN Tx Settings for 5GHz Band, CH. 46, 802.11ac, MCS0, 40MHz 20

WLAN Tx Test Observations on CMW500 .................................. 21

4.3.1. WLAN Tx Test in 2.4GHz band, CH. 6, 802.11b rates ................ 21

4.3.2. WLAN Tx Test in 5GHz Band, CH. 46, 802.11ac, MCS0, 40MHz 22

QRCT WLAN Rx Test Procedure ................................................ 23

4.4.1. WLAN Rx Settings for 2.4GHz Band, CH.6, 802.11b rates ......... 24

4.4.2. WLAN Rx Settings for 5GHz Band, CH.46, 802.11ac, MCS9, VHT-40MHz 24

WLAN Rx Test Observations on CMW500 .................................. 25

4.5.1. WLAN Rx Test in 5GHz Band, CH.46, 802.11ac, MCS9, VHT-40MHz 25


1VV0301640 Rev. 0 of 28 2019-12-09

5. ACRONYMS ............................................................................... 26

6. DOCUMENT HISTORY .............................................................. 27


1VV0301640 Rev. 0 of 28 2019-12-09

FIGURE LIST

Figure 2-1 RF Test Setup ..................................................................................................11

Figure 4-1 WE866C3 EVB Jumper Settings ......................................................................16

Figure 4-2 QRCT Configuration Settings ...........................................................................18

Figure 4-3 QRCT Connection Message ............................................................................18

Figure 4-4 Qcmr Connection Message ..............................................................................18

Figure 4-5 WLAN Tx Settings for 2.4GHz Band CH. 6, 802.11b Rates .............................20

Figure 4-6 WLAN Tx Settings for 5GHz Band, CH. 46, 802.11ac, MCS0, 40MHz .............20

Figure 4-7 WLAN Reciever Settings for 2.4GHz Band, CH.6, 802.11b rates .....................24

Figure 4-8 WLAN Reciever Settings for 5GHz, 802.11ac MCS9, VHT-40MHz, CH.46 ......24

TABLE LIST

Table 4-1 Tx Settings Description .....................................................................................19

Table 4-2 Rx Settings .......................................................................................................23


1VV0301640 Rev. 0 of 28 2019-12-09

1. INTRODUCTION

Scope

This document provides an overview about the WE866C3 RF test procedure on a Linux Machine.

Audience

This document is intended only for Telit customers who want to set up their application using

WE866C3 Linux module.

Contact Information, Support

For general contact, technical support services, technical questions and report documentation errors contact Telit Technical Support at:

• [email protected]




Alternatively, use:

https://www.telit.com/contact-us

For detailed information about where you can buy the Telit modules or for recommendations on accessories and components visit:

http://www.telit.com

Our aim is to make this guide as helpful as possible. Keep us informed of your comments and suggestions for improvements.

Telit appreciates feedback from the users of our information.

mailto:[email protected]



https://www.telit.com/contact-us

http://www.telit.com/


1VV0301640 Rev. 0 of 28 2019-12-09

Text Conventions

Danger – This information MUST be followed, or catastrophic equipment failure or bodily injury may occur.

Caution or Warning – Alerts the user to important points about integrating the module, if these points are not followed, the module and end user equipment may fail or malfunction.

Tip or Information – Provides advice and suggestions that may be useful when integrating the module.

All dates are in ISO 8601 format, i.e. YYYY-MM-DD.


1VV0301640 Rev. 0 of 28 2019-12-09

Related Documents

• Qualcomm_80-wl400-24_e_qdart_connectivity_User_Guide

• Qualcomm_80-wl431-24_a_qca9377-3_qdart_User_Guide

• Qualcomm _80-yc321-3_a_qca6174a_qca9377_qca9379.lea_myftm_User_Guide


1VV0301640 Rev. 0 of 28 2019-12-09

2. HARDWARE TEST SETUP

This section describes the hardware test setup required to perform RF testing in QRCT/Factory Test mode.

Prerequisites

• Two laptops: o One with Windows7/10 OS o One with Linux OS (x86 or i.MX Platform with Ethernet port)

• WE866C3 EVB for Linux host

• Rohde & Schwarz CMW500 RF Tester

• RF cable to connect the WE866C3 module to RF tester

• Three ethernet cables to connect the AP ( or Ethernet switch) to two laptops and RF tester

Figure 2-1, illustrates the hardware test setup.

Figure 2-1 RF Test Setup


1VV0301640 Rev. 0 of 28 2019-12-09

3. SOFTWARE INSTALLATION

Software Requirements

Following are the software requirements to perform RF testing using QRCT in Factory Test Mode.

• QDART SW Package (includes Qualcomm Radio Control Toolkit (QRCT) tool)

• QCMBR Source code package

3.1.1. QDART Installation

This section provide the step-by-step procedure to install the QDART SW package required to perform RF testing using QRCT.

To download and install the latest QDART software package, perform the following steps:

1. Open https://createpoint.qti.qualcomm.com/ and login with your registered Qualcomm Email ID and Password. First time users, click Register.

The homepage is displayed.

2. On the homepage, under Product Kits > All Product Types> Bluetooth/Wi-Fi, select DEV. This enables access to the tools.

3. Under Tools tab, search for QDART. a. Select Subscribe and click QDART_CONN.WIN.1.0 Installer or QDART.WIN.4.8

Installer to download.

Note: QDART_CONN.WIN.1.0 is a subset of QDART.WIN.4.8, hence the file size is smaller.

https://createpoint.qti.qualcomm.com/


1VV0301640 Rev. 0 of 28 2019-12-09

A pop-up window appears “The download will initiate in your browser shortly. Please do not close this window until your download has initiated.”

4. To install QDART, run the QDART executable installer in Administrator mode.


1VV0301640 Rev. 0 of 28 2019-12-09


1VV0301640 Rev. 0 of 28 2019-12-09

5. The QDART installer installs multiple tools. This document describes the procedure for doing manual RF tests using QRCT.

Note: Supported instruments: Litepoint IQxel80/IQxel160, R&S CMW500, Anritsu 8870A, and NI PXI 5644/5645/5646.


1VV0301640 Rev. 0 of 28 2019-12-09

4. WLAN TEST PROCEDURE

The QRCT is a Windows toolkit that provides a GUI interface for FTM operation. The user can manually check for RF performance in nonsignaling testing.

Setup QRCT for WLAN

Step 1: Connect the device under test as shown in Figure 2-1.

Step 2: Configure the Access Point (or Ethernet switch) to get IP address of the below devices:

• CMW500

• Windows Laptop (QRCT tool)

• Linux Laptop (QCMBR tool)

Step 3: Configure the CMW500 settings.

Step 4: Install the QCMBR tool in Linux laptop.

1. Open a command prompt and execute the following command

$sudo -s

Enter the password as "password"

2. Retrieve IP address of the Ethernet Interface in Linux Laptop by entering the following command

#ifconfig

3. Navigate to the Qcmr tool directory, build and execute the following commands

# cd ~/FOR_KOREA_TEAM/RT_TEST/Qcmbr

# ./Qcmbr

Step 5: Setup WE866C3 module in Factory Test Mode

1. Connect the WE866C3 EVB to the SDIO slot in the Linux Laptop. 2. Make sure the Jumper Settings on the EVB are as shown below.

Figure 4-1 WE866C3 EVB Jumper Settings

3. Next, connect an RF cable to WE866C3 EVB and CMW500 RF Communication Tester.

4. Once the connection is established, execute the following commands:

sudo -s

Enter the password : password


1VV0301640 Rev. 0 of 28 2019-12-09

#rmmod wlan.ko (Ignore if any error response and proceed to next command)

#modprobe cfg80211

#insmod ~/FOR_KOREA_TEAM/WE866C3/rootfs-

we866c3.build/lib/modules/wlan.ko

con_mode=5

#rfkill unblock all

#ifconfig wlan0 up

Step 6: Configure QRCT tool in Windows Laptop

1. Run the Qcmbr tool in your Linux laptop 2. Launch the QRCT tool in your windows laptop and select the configuration as

shown below. a. Select Target type AP_STATION_or_PCIe from the drop-down list. b. Select DUT: IP address (obtained from target platform; i.e, x86 laptop or

i.MX ) c. Click Connect d. Select Category > WLAN e. Select Chipset > QCA6174 f. Click Connect

g. Next, under MANUAL SELECT CHIP, click Chip Selection h. In Chip Selection window, select Chip > QC6174 i. Select RFCal Data Source > File j. Select WLAN Instance >Inst0 k. Click Select BDF to browse bdwlan.bin Telit provided. For example:

C:\WE866C3 bin files\bdwlan Default\bdwlan.bin

l. Click Establish Connection


1VV0301640 Rev. 0 of 28 2019-12-09

Figure 4-2 QRCT Configuration Settings

Upon the successful connection, the following message appears in the QRCT console.

• QRCT Console Log:

Figure 4-3 QRCT Connection Message

• Qcmbr Tool Log:

Figure 4-4 Qcmr Connection Message


1VV0301640 Rev. 0 of 28 2019-12-09

QRCT WLAN Tx Test Procedure

Table 4-1, lists the Tx settings description.

Table 4-1 Tx Settings Description

To put the device in initial WLAN connect, perform the following steps:

1. Click TX 2. Under TX SETUP, edit the WLAN Transmit settings as required.

Note: The selected settings can be saved in the form of .xml file for later use.

3. Click SET TX ON. 4. Once the test run is successful, the following message appears.


1VV0301640 Rev. 0 of 28 2019-12-09

4.2.1. WLAN Tx Settings for 2.4GHz Band, CH. 6, 802.11b rates

Figure 4-5, displays the WLAN Transmit settings for 2.4GHz band CH. 6, 802.11b rates

Figure 4-5 WLAN Tx Settings for 2.4GHz Band CH. 6, 802.11b Rates

4.2.2. WLAN Tx Settings for 5GHz Band, CH. 46, 802.11ac, MCS0, 40MHz

Figure 4-6Error! Reference source not found., displays the WLAN Transmit settings for 5GHz band, CH. 46, 802.11ac, MCS0, 40MHz

Figure 4-6 WLAN Tx Settings for 5GHz Band, CH. 46, 802.11ac, MCS0, 40MHz


1VV0301640 Rev. 0 of 28 2019-12-09

WLAN Tx Test Observations on CMW500

4.3.1. WLAN Tx Test in 2.4GHz Band, CH. 6, 802.11b rates


1VV0301640 Rev. 0 of 28 2019-12-09

4.3.2. WLAN Tx Test in 5GHz Band, CH. 46, 802.11ac, MCS0, 40MHz


1VV0301640 Rev. 0 of 28 2019-12-09

QRCT WLAN Rx Test Procedure

Table 4-2, lists the Rx settings description.

Table 4-2 Rx Settings

To run the WLAN Rx Test procedure, perform the following steps:

1. Click RX 2. Under RX SETUP, set the desired RX Setup in QRCT 3. Click SET CONT.RX 4. Load the appropriate ABS waveform on VSG:

WLAN_11b_SHORT_RATE11_LEN1024.wv

5. Enter the Cable loss, Frequency, and Power level. 6. GPRF Generator ON 7. Click SET CONTINUOUS RX and send a statistically significant number of packets

through VSG 8. Click GET RECEIVER REPORT in the QRCT 9. Continue incrementing the jammer power level until PER at a given power level

reaches the limits defined in the standards. 10. Inspect receiver report and calculate PER.


1VV0301640 Rev. 0 of 28 2019-12-09

4.4.1. WLAN Rx Settings for 2.4GHz Band, CH.6, 802.11b rates

Figure 4-7, displays the WLAN Reciever settings for 2.4GHz Band, CH.6, 802.11b rates

Figure 4-7 WLAN Reciever Settings for 2.4GHz Band, CH.6, 802.11b rates

4.4.2. WLAN Rx Settings for 5GHz Band, CH.46, 802.11ac, MCS9, VHT-40MHz

Figure 4-8, displays the WLAN Reciever settings for 5GHz Band, CH.46, 802.11ac, MCS9, VHT-40MHz

ABS waveform on VSG: WLAN_11ac_VHT_BW40_MCS9_LEN4096.wv

Figure 4-8 WLAN Reciever Settings for 5GHz, 802.11ac MCS9, VHT-40MHz, CH.46


1VV0301640 Rev. 0 of 28 2019-12-09

WLAN Rx Test Observations on CMW500

4.5.1. WLAN Rx Test in 5GHz Band, CH.46, 802.11ac, MCS9, VHT-40MHz


1VV0301640 Rev. 0 of 28 2019-12-09

5. ACRONYMS

DUT Device Under Test

FTM Factory Test Mode

QDART Qualcomm Development Acceleration Resource Toolkit

QRCT Qualcomm Radio Control Toolkit

RF Radio Frequency

Rx Receive

Tx Transmit

WLAN Wireless Local Area Network


1VV0301640 Rev. 0 of 28 2019-12-09

6. DOCUMENT HISTORY

Revision Date Changes

0 2019-12-09 First issue

[01.2

01

7]

Mod. 0805 2017-01 Rev.6