new zealand - king hitterkinghitter.com/upload/operator-manuals/nz kinghitter brochure.pdf · new...

5
www.kinghitter.com New Zealand ‘Punches well above its weight’ Series II Expander with Super Pro Base (Optional Safety Guarding not shown)

Upload: doanngoc

Post on 31-Aug-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

www.kinghitter.com

New Zealand

‘Punches well above its weight’

Series II Expander with Super Pro Base

(Optional Safety Guarding not shown)

Testimonial“The postdriver that is easy and simple to operate but does a perfect job driving up to a 3.5m post.”

Bruce Watt Lifestyle Farmer, AUCKLAND, NZ

Kinghitter Rancher Series 1 - 3.8m Beam

• Standard 3 bank hydraulic valve• 3 Point Linkage - Rear Mounted• Single Flange Beam• Tailor-made for economical Fencing &

General Farm Work• Ideal for Farmers & Ranchers• Mounts to Tractors, Skid Steer

Loaders and Barges/Pontoons• Drives up to 200mm dia. Posts• Standard 205kg Weight• Freestanding in most conditions• Standard Post Cap

SERIES I - RANCHER

Specifications

RANCHER

3.8m Beam

Series I - Rotation Angles

Standard 3 bank hydraukic valve

phone: 0800 476 868 web: www.kinghitter.com

Floats Like a Butterfly, Stings Like a Bee

Series I Rear Mount (Safety Guarding Optional)

PRODUCT UPDATES

Multi-Shift Base20’’ Side Shift and 6’’ Back Shift - available on Series II only

• 500mm Side Shift • 150mmn Back Shift• Fastest placement of post on any

postdriver - ‘60 posts per hour’

Standard 900mm Side Shift

Open 900mm Side Shift Position

500mm Side Shift Feature - Closed Position500

150

900

500

Foot Print Series 2with 500 Side Shift& Terminator Base

Terminator BaseConverts Rear-mount to Side-mount

• 900mm Side Shift• All fencing tools fit on the Base• 500mm Back Shift with Series II

Side Shift• 5 cu.ft Tool Box• Level holder, Jenny holder,

Spade holder and Rammer holder• Towball Hitch standard

Series III BaseSeries III Side Mount base ‘Contractor Specific Base’

SERIES III BASE - Footprint of Strike Zone

TERMINATOR BASE - Footprint of Strike Zone

Open 900mm Side Shift Position >

MULTI-SHIFT BASE - Footprint of Strike Zone

• Standard Safety Bracket Main Pivot Pin• Standard Safety Hammer Lock

Series 1 Optional Extras

• Safety Guard• Hydraulic Top Link• Hydraulic Angle Adjustment• Side Mount Frame• Top Link Extension Bracket• T Post Holder and 7.3cm Oil Pipe Holder(No Rock Spike or Pilot Auger available for this model)

20° 10°20° 10°

20° 20°20° 20°

FAIRBROTHER INDUSTRIES LIMITED

• 900mm Side Shift• 600mm Back Shift• Back Shift Optional• Fits all Series III Beams

< Multi-Shift Open Position

SERIES IV BASE - Footprint of Strike Zone

200 600

Series IV BaseSeries IV Side Mount base ‘Contractor Specific Base’

• 600mm Side Shift• 200mm End Shift• Rear or side operation• Stable operation in any position• Most compact postdriver on the market• Whole operation fits inside tractor wheels• Base takes a Series II and Series II Expander• Gets into any awkward position• Transport width 2.15m Series IV Base caption to come

Testimonial“The Kinghitter is a true workhorse. The postdriver that can be relied upon in all conditions and situations.”

Dave Currie Fencing Contractor, FEILDING, NZ

Kinghitter™ Series II - 3.8m Beam

Kinghitter™ Series II - 4.25m BeamOptional Hinged Mast

Kinghitter™ Series II - 4.88m Beam Optional Hinged Mast

• 3 Point Linkage – Rear Mounted• The World’s Finest Post Driver

with Double Thickness Steel on the Main Beam / Proven World Over

• Suitable for Construction Sites• Ideal for Farmers, Ranchers, Vineyards,

Contractors, Freeway Construction• Mounts to Tractors, Skid Steer Loaders,

Excavators, Back Hoes, Barges, Pontoons

• Drives up to 300mm dia Posts• Standard 250kg Weight

Heavy Duty Beam

• Standard Safety Weight Stop• Freestanding in most conditions• Standard Heavy Duty Safety Post Cap• Standard Safety Hammer Lock

Series II Optional Extras

• Hammer Weights: 205kg, 227kg, 250kg, 272kg• Safety Guarding & Interlocked Operating Controls• Pilot Auger Kit• Rock Spike Extractor • Rock Spike Extractor Post Cap• Rock Spike Combo Auger Unit• 500mm Side Shift Multi-Shift Base. (This also can

be purchased with a 150mm Back Shift as well)• Terminator Base 900mm Side Shift. This makes a

Series II Side Mounted.• Series IV Base• Super Side Shift – 500mm Side Shift Ram• Top Link Extension Bracket

SERIES II - HD BEAM

Specifications

3.8m Beam4.25m Beam4.88m Beam

Series II Rear Mount - Rotation Angles

Series II Mounted on Terminator Base

King Country Multi-Shift Base with Series II Post Driver - 500mm side shift / 150mm end shift

20° 10°20° 10°

20° 20°20° 20°Packs the Professional Punch

FAIRBROTHER INDUSTRIES LIMITED

Series II Rear Mount

Including Optional Safety Guards

phone: 0800 476 868 web: www.kinghitter.com

Testimonial“The expander is great to get in and out of places and the rock spike a must. Now I can go anywhere and drive a post into anything.”

Kinghitter™ Series II Expander 3.1m to 5.1m Expanding Mast

• Telescopic Mast• Closed Position 3.1m -

Open Position 5.1m• 3 Point Linkage Mounted• Mounts to Tractor, Skid Steer, Loader,

Excavator, Barge & Pontoon• Safety Hammer Lock• Orkot Slides on Hammer & Postcap• Storage and Transport Height - 3.1m• Hammer Weight: 340kg

SERIES II - EXPANDER

Specifications

Expander

3.1m to 5.1m Mast

Skid Steer Mounted - Closed Position

Series II Expander in Post Driving Position

Series II Expander with Optional Safety Guarding & Auger

For its height, punches well above its weight

Kinghitter™ Series II Expander - Optional Extras

• Safety Guarding & Interlocked Operating Controls• Pilot Auger Kit• Rock Spike Extractor • Rock Spike Extractor Post Cap• Rock Spike Combo Auger Unit• 500mm Side Shift Multi-Shift Base. (This also can

be purchased with a 150mm Back Shift as well)• Terminator Base 900mm Side Shift. This makes a

Series II Side Mounted.• Series IV Base• Super Side Shift – 500mm Side Shift Ram• Top Link Extension Bracket

Series II Expander Rear Mounted with Guarding & Auger

Shown with Optional Safety GuardsShown with Optional Safety Guards

SERIES III - HD BEAM

SERIES III - EXPANDER

Heavy Duty Beam

EXPANDER

3.1m to 5.1m Mast

SpecificationsKinghitter™ Series III 3.8m, 4.25m, 4.88m Beam Optional Hinged Mast (all models)

• 3 Point Linkage – Side Mounted• The World’s Finest Post Driver with

Double Thickness Steel on Main Beam• Ideal for Farmers, Ranchers, Vineyards,

Contractors, Freeway Construction• Mounts to Tractors, Skid Steers,

Back Hoes• Standard 450mm Hydraulic Side Shift• Drives up to 300mm dia Posts• Standard 250kg Weight• Standard Safety Weight Stop• Standard Heavy Duty Safety Post Cap• Standard Safety Hammer Lock

Series III Optional Extras• Safety Guarding & Interlocked Controls• Hydraulic Pilot Auger• Hydraulic Rock spike• Combo Spike – Auger Unit• Orchard Base 1.755m width

SpecificationsKinghitter™ Series III Expander 3.1 to 5.1m Expanding Mast

• Telescopic Mast• Closed Position 3.1m -

Open Position 5.1m• 3 Point Linkage Mounted• Mounts to Tractor, Skid Steer, Loader,

Excavator, Barge & Pontoon• Standard 450mm Hydraulic Side Shift• Safety Hammer Lock• Orkot Slides on Hammer & Postcap• Storage and Transport Height - 3.1m

Kinghitter™ Series III Expander - Optional Extras

• Safety Guarding & Interlocked Controls• Hydraulic Pilot Auger• Hydraulic Rock spike• Combo Spike – Auger Unit

Series III Side Mount - 450mm side movement

Series III Expander (Compulsory Safety Guards)

Optional Rock Spike Accessory

Testimonial“A Post Driver that is built for a fencing contractor. It can be used anywhere, and has an excellent range of usable accessories, especially the Rock Spike Extractor.”Andrew Fleury Fencing Contractor, TAIHAPE, NZ

The Heavyweight Not for the Light-Hearted

3.8m Beam4.25m Beam4.88m Beam

phone: 0800 476 868 web: www.kinghitter.comFAIRBROTHER INDUSTRIES LIMITED

1 Weight stop - included for safety operator

2 Hydraulic Hoses - have a safety factor above 4:1

3 Retaining Plate - on main swivel pin

4 Wire Rope - has swaged end on lifting the hammer

5 Rubber Sleeve - protects rope, bolt and collar

6 Safety Signs - positioned on both sides warning operator of serious safety risks

7 Information - on the total (mass) weight of the post driver on mast

8 Operating Instructions and practical hints with postdriver - supplied in water proof receptacle

9 Up and Down Lever - orientated differenly from other levers

10 Valve Bank Handle Guard

19NEW SAFETy FEATURES

have 19 NEW Safety Features added to Kinghitter Series II, II Expander, III and III Expander to ensure maximum protection for the operator. In addition to these please read the ‘Committed to safety first’ on the back of this brochure. Pictured: Series III with Terminator Base Side Shift & Optional Safety Guards

ACCESSORIES

11 Main Guard travels up and down with Post Cap - keeping hands out above and below strike zone

12 Guards - to prevent hands contacting with nip points on wire rope

13 Guard - to protect body from broken posts while ramming

14 All Controls - are clearly identified

15 All Control Levers - return to neutral when released

16 Extra Hydraulic Control Lever - keeps both hands out of strike zone while operating

17 Interlock Lever - hydraulic control lever to control the drop speed of weight in operation

18 Free Standing Leg - on hard surface

19 Safety Bolt - in bottom link arms. Prevents post driver falling on operator if top link fails.

Rock Spike Extractor

Inset: Rock Spike Safety Cap

Drives 65mm - 90mm - 130mm

High Tensile Steel Spike. Punches through Rocks, concrete, frozen ground prior to posting.

Rock Spike Extractor Working Position

8.13 Tonne Extraction Lift to remove driven spike for ground, leaving Pilot Hole.

Rock Spike Extractor Working Position

8.13 Tonne Extraction Lift to remove driven spike for ground, leaving Pilot Hole.

Rock Spike Combination Unit

Assists with downward pressure when drilling through Limestone, Sandstone, Ironsand and solid heavy clay. 50mm - 250mm holes.

Rock Spike Combo. Unit Working Position

6 Tonne Down Pressure

Tungsten tip 50mm - 250mm Augers.

Hinged Mast

Eliminates time wastage when confronted with height restrictions & assists with storage. Optional on 4.25MTR & 4.88MTR Beams. Standard on Australian 4.25MTR & 4.88MTR. Series 2 & Series 3 Models.

Safety Post Cap

The unique holding system that makes hands free post driving super safe.

Pilot Auger

205kg - 250kg Down Pressure

50mm - 250mm Auger Capacity

T-Post, Oil Pipe, Warratah & Road Marker Post Holder

Prevents light posts from buckling under impact.

Safety Guard

Inset: Folded Back

Supplied as an optional extra to comply with local bylaws.

*Standard on all Australian Models.

SPECIFICATIONS

Kinghitter™ – The Right Tool for the Right JobSeries II - Construction, Farming, Ranches, Game Fencing, Hire Company, Skid Steer Loaders, Retaining WallsSeries III - Orchards, Fencing Contractors, Freeway Guard Rails, Vineyards, Game Fencing, Farming RanchesExpander SII & SIII - Great for transporting on trucks, Contractors, Councils, Construction Sites, Under TreesRock Spike - Stony Rocky Conditions, Pilot hole stops posts being damaged, leaving tighter constructionCombo Auger - 500kg Down Pressure, Limestone, Sandstone, Iron Sand, Heavy ClaysPilot Auger - 250kg Down Pressure, Limestone, Sandstone, Heavy ClaysRock Spike Postcap - Shelf rock and hard conditions. Required when using Rock SpikeOrchard Base - Series 3 fits down 2m rows. Also can be used on Skid Steer Loaders, Guard Rail Construction

Kinghitter™ Post Drivers - Committed to Safety 1st

DISTRIBUTED By

away

laug

hing

0908

018

9 Bay Park Place, Beachhaven, 0626 Auckland, New Zealand

Phone:+64 9 482 0866, Fax: +64 9 482 0877 Email: [email protected] Web: www.kinghitter.com

INDUSTRIES LIMITED.

Specifications Series I Series II Series III II EXPANDER III EXPANDER

MOUNTING Category II Category II Category II Category II Category IIMAST LENGTHS 3.8m 3.8m, 4.25m, 4.88m 3.8m, 4.25m, 4.88m 3.1m to 5.1m 3.1m to 5.1mHINGED MAST N/A Optional on 4.25-4.88m Optional on 4.25-4.88m N/A N/AHAMMERS 205kg 205kg to 272kg 205kg to 272kg 340kg 340kgIMPACT AT FULL STROKE 3.8m 80,000 PSI 3.8m 80,000 PSI 3.8m 80,000 PSI 3.1m-5.1m 100,000 PSI 3.1m-5.1m 100,000 PSITILT FRONT / BACK 10° / 20° 10° / 20° 30° / 30° 10° / 30° 30° / 30°TILT SIDE / SIDE 20° / 20° 20° / 20° 25° / 45° 20° / 28° 28° / 40°LEGS Fixed Adjustable Adjustable Adjustable AdjustableTOP LINK N/A Hydraulic Hydraulic Hydraulic HydraulicANGLE ADJUSTMENT Manual Hydraulic Hydraulic Hydraulic HydraulicSIDE SHIFT N/A Yes/Optional 450mm Yes/Optional 450mm Standard Hydraulic Standard HydraulicSAFETY POST CAP Standard Standard Standard Standard StandardSAFETY GUARD Optional Optional Optional Optional OptionalSAFETY HAMMER LOCK Standard Standard Standard Standard StandardMAX. POST HEIGHT 3.1m post 3.1m post 3.1m post 4.25m post 4.25m post MIN, HYDRAULIC PSI 1800 PS 1800 PSI 1800 PSI 2200 PSI 2200 PSIVOLUME OIL / MIN. AV 6 GPM 8 GPM 8 GPM 10 GPM 10 GPMSTORAGE HEIGHT 3.8m 3.8m 3.1m 3.1mSHIPPING WEIGHT (Guide only) 440kg 637kg 1,035kg 925kg 1,302kg SHIPPING VOLUME From 18 cu.ft From 21 cu.ft From 46 cu.ft From 66 cu.ft From 85 cu.ftPILOT AUGER KIT N/A Yes/Optional Yes/Optional Yes/Optional Yes/OptionalROCK SPIKE EXTRACTOR N/A Yes/Optional Yes/Optional Yes/Optional Yes/OptionalROCK SPIKE COMBO N/A Yes/Optional Yes/Optional Yes/Optional Yes/Optional AUGER UNITTERMINATOR BASE N/A Yes/Optional No Yes/Optional No 900mm SIDE SHIFTMULTI SHIFT BASE N/A Yes/Optional No Yes/Optional No 150mm BACK SHIFT 500mm SIDE SHIFTSERIES IV BASE N/A Yes/Optional No Yes/Optional No

• OptionalSafetyGuardingwithInterlockingOperatingControls

• StudytheOperatorsManual,WatchtheAssembly&SafetyVideo,andfollowtheinstructionsontheSafetyDecal

• Offsetcontrolsletstheoperatorstandsafelytothesideofthedriver

• PostCapguidesthepost

correctly&protectstheoperatorfromimpact

• Neverstandinfrontofthedriver,alwaysstandtoonesideofthepostbeingdriven

• UsethecorrectPostCaporTPostholdertoholdthepost.

• Changethevalvetosuitopenorclosedcentrehydraulics

• Alwayscheckforundergroundandoverheadobstacles(wires,

pipesetc...)• Makesurealllegsare

positionedfirmlyontheground• Neverusethemaximumforce

ofthedriveruntilyouaresurethepostisbeingdrivenstraight

• Keephandsawayfromthetopofthepostatalltimes.

• Usetherighthorsepowertractorunittosuitthedriver.

• Donotoperatethepostdriver

forotheruses.• Usecautionwhendrivingsmall

diameterwoodandsteelposts.• WearappropriateSafety

equipment(EarMuffs,SafetyGlasses,andHard-Hat).

• Considertheoperatingenvironment(steepslopescancauserollovers).