news june 2019 - cmawacmawa.com.au/wp-content/uploads/2019/07/cmawa-newsletter-20… · hafele...
TRANSCRIPT
CMAWA Major Sponsors Jan—June 2019
e-News June 2019
Message from EO
In this edition, I thought it relevant to provide you with a snapshot of our current and loyal members whose on-going support is always greatly appreciated. As a member based Association, the CMAWA relies on the income it receives from membership subscriptions to maintain operations. Putting it quite simply and in our current situation, if our membership levels continue to fall, the future sustainability of the CMAWA would be indeed questionable.
Our membership levels for 2019 currently stand at 34 Suppliers and 124 Cabinet Makers. You will agree, this is well below the potential numbers we could and should have, considering we are a state wide Association. Whilst the Committee and Management are constantly spreading the word on the benefits for partnering with CMAWA, the take up of new members is slow. We do not have a dedicated ‘sales team’ behind the scenes and perhaps this could resolve this issue. However, any expenditure of our member funds needs careful deliberation by the Committee.
In the meantime, you might all be able to assist our cause. The referral incentive, brought in with our new Constitution makes it easy and rewarding for existing members to encourage a new member to join us. Just refer one new member and receive a 25% discount on your annual membership fee. Put forward four new members in any one year, your subsequent annual membership is completely free. It’s not expected to be a time consuming task for you, just refer them to me or our website and I’ll do the rest. Let me know though if you do refer someone for membership so I can make a note.
There are massive benefits if we can increase our membership levels but two important one are:
• Gives CMAWA a louder voice for Advocacy purposes and when negotiating with Government for better and fairly conditions for our Industry—Strength in Numbers
• Gives us a higher potential to secure community or Government funding for CMAWA projects or services. One that comes to mind is raising Consumer awareness and education on the benefits for selecting a CMAWA member.
• Your opinions matter greatly, so if anyone has any further suggestions or ideas on how we can increase our memberships to a more acceptable level, be great to hear from you. Regards Sheila Payne (EO)
Dates for your calendar with
• Apprentice & Traineeship Networking event Wed 19th June 4.30-7.30pm Suite
4, 7 Hector Street West, Osborne Park. Join us with Stan Liaros (CEO ATC) and his
team for an informative evening on all your group training and labour hire needs.
CMAWA member special rates offer.
• Laminex Networking event Thursday 1st August 4pm—6pm Osborne Park
Showrooms Scarborough Beach Road. Join Troy Hawkins Residential Sales
Manager, Jamie Clark Commercial Sales Manager and their teams to see the latest
Laminex ranges over a few drinks with light refreshments
• Annual Golf Day 2019—Friday 25th October Collier Park Golf Course
Registrations open now—come join us for a fun packed day and a great
networking event.
CMAWA Supplier /Associate Members 2019
Supplier Main Contact/s Website
Advanced Architectural Products Nigel Vandersteen aap.net.au
Apollo Risk Services Mark Taylor/Carl King apolloriskservices.com.au
Artia Peter Dobbyn artia.com.au
Benchmark Business Works Pru Cameron benchmarkbusinessworks.com.au
Biesse Australia Martin McCluskey biesse.com.au
Brewer Machinery Malcolm Brewer/Roy Deering brewermachinery.com.au
Cabmaster Software Peter Hutson cabmastersoftware.com.
DMS Spray Solutions Damian Pereira spraysolutions.com.au
eKitchens Adam Smith ekitchens.com.au
Flat Packs WA Brendan Menner flatpackswa.com.au
Gibson Benness Industries Keith Benness gbi.com.au
Gunnersen Pty Ltd Jon Battelley gunnersens.com.au
Hafele Australia Sean Vadala hafele.com.au
Hettich Australia Len Larking hetttich.com.au
Homag Australia Ross Campbell homag.com.au
JH Wilberforce Joe Vecchio jhwilberforce.com.au
Jobman Pty Ltd Aaron Crees jobman.com.au
Laminex Troy Hawkins/Jamie Clark laminex.com.au
Leitz Tooling Systems John Kerr leitz.com.au
Lincoln Sentry Andrew Loughton lincolnsentry.com.au
Matrix Insurance Group Nicholas MacDonald matrixinsurance.net.au
Nessco Simon Ness nessco.com.au
One Click Cabinets Paul Van Rjit occ.direct
Planit Leigh Swalling au.planit.com
Polytec Andrew Jardine polytec.com.au
Premium Surfaces/Premium Stone Mark Sheahan premsolid.com.au
Proform Products Mark Anderson proform.com.au
Tommotek WA Drina Thompson tommotek.com
The Apprentice & Traineeship Co. Chris Liaros/Chris Gray gtsw.com.au
West Coast Panel & Veneer Gary Walton westcoastpv.com.au
Wilson & Bradley Mark Webb wilbrad.com.au
The Kitchen Door Company Adam Smith thekitchendoorcompany.com.au
Woodwest Services Derek De Vos M: 0419 878 100
World Wide Timber Traders Phil Crawley wwtt.com.au
CMAWA South West and Regional Cabinet Maker /Affiliate Members
Albany: Dean Shekell Kitchens Dean Shekell
Busselton:
Busselton Furniture Products Aaron Tucker
Busselton Cabinet Makers David Watts
Geo Cabinets Daniel Bosveld
Esperance:
Esperance Cabinets Ramon Dellaca
Norms Cabinets Julie Wright
Geraldton:
Eddie Thompson & Co Eddie Thompson
Geraldton Building Services & Cabinets Peter Fleay
Jurien Bay: J&R Carters Fine Furniture Jeremy Carter
Kalgoorlie:
JR Turner Cabinets Jeff Turner
Holman Cabinets Ryan Holman
Karratha: Karratha Cabinets Mark Yaksich
Pinjarra: Artra Custom Kitchens & Commercial Tim Drag
Merredin: M&W Kitchens and Cabinets Brad Manning
Narrogin: South East Cabinetmakers Darren Davies
Nungarin: Total Concept Cabinetmaking Nick Malaspina
Webberton: UI Home Improvements Paul Johnson
CMAWA Cabinet Makers Members 2019 Perth Metro and surrounds
Wangara /Landsdale Osborne Park
Academy Custom Interiors Carlino Cabinet Works
Cabinet Impressions Ikal Kitchens
Carpentech Cabinetry Modular Kitchens
Clohessy Cabinets Shepherd Craft Furniture
Commodore Cabinets Statewide Cabinets
Cooleys Cabinets West Coast Cabinets
Custom Style Kitchens
Designtec Commercial Malaga
DCC Group Additional Cabinets
Euro Trend Airport Cabinets
Ital Cabinets Cabinets by Dario
Kitchen Kreations Centurion Cabinets
Master Cabinets Challenge Cabinets
MC Cabinets Imperial Interiors
Perez kitchen Designs Kitchens on Tap
Petgia Cabinets Mor Cabinets
Refined Cabinets Optima Interiors
Samuel Cabinetry Style Side Cabinets
Silverline Cabinets Top Shelf Cabinets
Trufix Cabinets Veeyays Renovations
Wangara Classic Cabinets Westar Cabinets
Gnangara Bayswater
Anthony Johns Cabinets Baywater Cabinets
Benchmark Cabinets
Balcatta Delta Cabinets
Cabinet Network K&C Aubrey
Crown Cabinets & Design Luchs Cabinets
Furniture Design Studio Ned’s Cabinets
Bibra Lake Canning Vale
Arena Interiors Salt Kitchens & Bathrooms
Diverse Interiors Ultimate Design Furnishings
Gerovich Cabinets Willetton Cabinets
Kitchen Solutions Wood & Form Cabinets
South Fremantle Cabinets
Southern Kitchens Armadale
Character Cabinets
Maddington Dema Ktichens
Infinity Cabinetmaking Nathans Cabinets
Wood Workings Australia Western Kitchens
Willetton Forrestdale
Essential Cabinet Works Kanters Cabinets
Infinity Cabinetmaking Master Class Cabinets WA
LC Kitchen & Stone Gingin: Gingin Cabinet Works
O’Connor Neerabup
Ferguson Corporation Blueprint Interiors
G&A Nankiville Creative Cabinets
Professional Innovators Klyde Kitchens & Cabinets
Raw Edge Furniture Northam: Ashman Fine Cabinets
Beaconsfield: Handwerk Belmont: Cabinet Creations
Bullsbrook: JFG Hogan Cabinetmaking Hendersen: Brown Brothers Furniture
Joondalup: Kitchen Craftsmen Jandakot: Newton Cabinets
Kewdale: Stylewoods Commercial Kelmscott: STD Kitchens
Kenwick: Kenwick Cabinet Works Morley: QN Designs
Melville: Absolute Carpentry & Cabinetry Mundaring: Andrew Wall Cabinets
Port Kennedy: Appearance Cabinets Seville Grove: Westgate Kitchens
Subiaco: Subiaco Furniture Factory South Fremantle: Eco Cabinets
Welshpool: Belliss Custom Creations Yanchep: Yanchep Cabinets
Welshpool: LA Cabinets
Rockingham: Mandurah:
Absolute Kitchens Estuary Cabinets
Giltedge Kitchens Merlin Cabinets
Paramount Cabinets The Cabinet Factory
Major Sponsors January to June
Dekton | Silestone Premium Stone currently has a range of seven Dekton colours in
stock and ready to go. We also have Silestone Eternal Calacatta Gold
in stock and on special while stocks last.
Come in to view the full slabs now.
Mark Sheehan
58b Tulloch Way, Canning Vale WA 6155
9456 4055 or mobile 0422 333 934
[email protected] http://premstone.com.au
+++++++++++++++++++++++++++++++++++++
Worldwide Timber Traders supply a huge range of timber products and custom
fabricating services. We work closely with industry professionals throughout the lifecy-
cle of their projects, providing them with quality timber products such as Cladding, Tim-
ber Decking, Composite Decking, Veneers, Plywood, Structural Timber & Trusses,
Laminated panels and so much more!
Besides offering a huge range of cash and carry timber products, Worldwide Timber
Traders also works closely with industry professionals throughout the lifecycle of their
custom projects. At Worldwide Timber Traders, we pride ourselves on our great
customer service. Whether you come to visit us at our Bibra Lake shop or make use of
our trucks that are always ready to get your delivery across the state, rest assured, our
professional transport team deliver quality service with a smile!
Phil Crawley - National Sales and Import Manager - 0433 416 002 or 9418 3222
www.wwtt.com.au
179 Barrington Street, Bibra Lake WA 6163
Major Sponsors January to June
DMS Spray Solutions is a family owned and operated business based
in Perth Western Australia. We have a dedicated team of experienced
French Polishers and Cabinet Makers who understand the industry and
requirements of its customers. We are recognized for our strong work
ethics, and strive in supplying the right solution of French Polishing needs
to a large range of clients, including large entities as well as the general
public; and can cater for any size job.
We also supply a variety of panel profiles, custom made according to your
measurements for any new installations, providing you with the
convenience of a complete service.
We are proud to introduce a new product which we have been testing for
over a year now, called Paintable Laser Edging. The Paintable Laser Edging is bonded to the edges of flat panels and is designed to be painted onto directly, without priming first, saving time and also reducing the cost of the job. This process is ideal for projects such as Units or Apartments where larger quantities are typically involved, and we can pass on lower rates to our clients.
For our commercial clients...
We offer commercial 2-pac coating application services for Builders, Office
and Retail Shop fit-outs, general office and amenities, for projects of both
a major and minor scale. We can also supply and paint a variety of panel
profiles to give you a complete end to end service.
Our small team of experts will strive to deliver the desired results within
your given time frames with integrity and without compromising on quality.
We are always happy to provide free Quotes and discounts apply for large
quantities of work.
Free pick-up & Delivery is included in the Perth metro area
Director/Owner Damian Pereira M: 0430 148 322
E: [email protected] www.spraysolutions.com.au
24 Boulder Road Malaga WA 6090
Awards and information you should know
The Fair Work Commission has increased the national Minimum Wage by 3% effective
from 1 July 2019.The minimum wage increase will have an administrative and financial
impact on the bottom line as it does each year. However this shouldn't be a time to
consider reducing staff numbers or increase product cost.
Being creative with cost savings and identifying new efficiencies can help your business
manage these type of increases. For instance, you may consider to reduce overtime
rates payable by ensuring your employees ordinary hours are within the ordinary span
of hours or rostering provisions outlined in the relevant modern awards. Also, by
ensuring employees receive their meal breaks or required breaks between shifts, the
potential costs of additional loading being payable to staff will be reduced.
The Minimum wage is the absolute lowest that an employee can be paid. The current
minimum in Australia is $740.80 per week which equates to a minimum hourly rate of
$19.49.as set on May 30th 2019.. Under a Modern Award, the wages for each
classification are the lowest possible wage rate. If an employer would like to pay above
this minimum rate, both the employee and employer need to be aware of any increases
to the Award rates when the Fair Work Commission release adjustments.
This is important because as long as the employee is being paid above the award rate,
the employer does not need to increase the employees wats on 1st July because the
base requirement is already being met.
Overtime is usually any work in excess of 38 hours per week and is often paid at a
higher wage. Instead of being paid an overtime rate, an employee may be able to take
time off instead. This is called time in lieu (TOIL)
For more information contact Fair Work Australia, Employsure or CMAWA Executive
Officer on [email protected]
***************************************************************************************************
The Apprentice and Traineeship Company and ATC Employment
Solutions (ATC) is a “not-for-profit” group training and labour hire company providing
services State wide in Western Australia. ATC delivers high quality staffing solutions
across a diverse range of industries, and regardless of your size, we have a reliable
and skilled workforce ready for hire.
With over 30 years’ experience in employment and recruitment we understand workflow
needs. We can provide you with group training and labour hire solutions to suit your
requirements. We employ the apprentices, trainees and labour hire workers and place
them with you. We handle all the paperwork for wages, allowances, workers’
compensation, superannuation, etc.
We are there throughout the period of placement to make sure everything runs
smoothly. We are the extra layer of support for you. We free you up, so you can run
your business! When you take a placement through us, we will:
advertise the position;
interview, reference check and, in relation to apprentices and trainees, aptitude
test;
make recommendations of best candidates;
arrange pre-employment medicals, if required;
ensure the placements have required PPE;
provide inductions;
provide ongoing performance assessments for apprentices and trainees;
be there regularly as a mentor, resolve issues and provide pastoral care to the
apprentices and trainees to ensure they are focused on your business; and
liaise with the relevant registered training organisation regarding their off-the-job
training.
ATC offer a great service at a competitive price
CMAWA Member Discounts apply
Chris Gray, Field Officer [email protected]
Mobile: 0419 930 657 or 08 9204 4566
Suite 4, 7 Hector Street West, Osborne Park WA
7 Hector Street West Osborne Park WA 6017 wwww.gtsw.com.au