nexa series - dosya.ertek.comdosya.ertek.com/pdf/kataloglar/seko/seko nexa... · nexa series...
TRANSCRIPT
innovation > technology > future
Hydraulic double diaphragm
metering pumps
Nexa Series
A line hydraulic double diaphragm meteringpumps designed according to the API 675
Standards.
Their possibility of construction with variousmaterials allows these metering pumps to satisfyevery liquid dosing and mixing application.
Furthermore, their complete compliance withthe ATEX Standards even allows for thesepumps to be installed in hazardous areas.
Hydraulic double diaphragm
metering pumps
Nexa Series
MechanismsMechanical return type available in various sizes.
Main characteristics:n Internal worm gearbox, oil bath lubricated with low noise emissions
n Rotating parts on bearings to minimise power consumption
n Each mechanism comes complete with an internal gearbox; pumps with differentspeeds (strokes/min) can therefore be joined, allowing for greater flexibility in selectingthe pumps themselves
n High precision stroke adjustment, both manual and by means of an electric orpneumatic actuator or frequency converter.
n Accuracy within ± 1%
YN, TN, HN: Hydraulic double diaphragm heads
The ideal solution for applications requiring high levels of operational
safety and reliability
n Zero leakage; watertight construction for dosing toxic, corrosive and other hazardousliquids, for which the absence of leaks is fundamental
n Protection against external pollutants which could contaminate the liquid being pumped ifusing plunger pumps
n Double diaphragm, double protection; if one of the two diaphragms is damaged, theprotection system immediately signals the anomaly; the pump is nevertheless permitted tocontinue to operate, thereby preventing immediate downtime
n Flexibility of use; the PTFE diaphragms are compatible with a vast assortment of liquids
n Flow rate modularity; the rated flow rate can be changed by simply replacing the plungerand the relevant seal cartridge
n Solid suspensions; the diaphragm’s proper positioning is ensured by a mechanical systemwhich does not require the use of perforated shields on the process side, thereby allowingfor liquids containing solid suspensions to be pumped.
n Construction materials; the parts in the standard configuration that make contact with theliquid are made from AISI 316L stainless steel, PP and PVDF. Other materials available uponrequest.
for zone 1and zone 2
Standards
Mechanical refilling system
Maintains a constant level of the hydraulicfluid, thereby guaranteeing maximumprecision and repeatability. Keeping alsounder control the deformation of diaphragmthereby increasing its duration.
Double diaphragm with rupture
detector
In the event of a rupture of one of the twodiaphragms, the detector activates either alocal visual alarm or a pressure switch. Thesecond diaphragms ensure the continuedoperation of thepump. This allowsfor scheduledmaintenance.
seko > water & industry > hydraulic double diaphragm metering pumps
innovation > technology > future 3
Accessoriesn Flow rate calibration pots
n Pulsation dampers
n Safety valves
n Back pressure valves
Optionsn Flanged connections
n Heated or cooled heads
n Transmission of the diaphragmrupture signal
n Municipalitiesn Wastewatern Chemicaln Food & Beveragesn Detergentsn Power Generationn Environmentn Petrochemicaln Pharmaceuticaln Papern Textile
ApplicationsWater treatment and
Industrial sectors
TechnicalFeatures
Pressuren up to 200 barg
Flow Raten fup to 2600 l/h
Temperaturen Ambient: from -5 °C to 40 °C
n Fluid: from -5 °C to 50 °C
Contact materialsn AISI 316L; PP; PVDF; PVC
The electrical actuators AKTUAwere designed to replace the manualadjusting device of the flow, on thepump, with an automatic system,remotely controllable, which acts onthe length of the stroke of the pump,directly in the field.
n Internal display 4-digit, 7-segment display.
n Calibration can also be executedwith system running.
n Available in standard version forinstallation in areas not classified,or ATEX compliant for installationin hazardous areas.
Pressure relief valveProtects the pump against unexpectedoverpressure.
Cartridge valvesIn order to ensure maximum dosingprecision, even for small flow rates, doubleand triple ball configurations are availablewith high precision seats. The metal gasketsfor the AISI 316L stainless steel heads, andthe FPM gaskets for those in plastic,guarantee maximum compatibility.
Flow Rate adjustmentn Easy to handle knob with high visibility
nonius for the best flow adjustment.
n Optionally automatic variation by electricalactuators AKTUA.
Venting systemAside from guaranteeingautomatic venting duringoperation, the venting system alsofacilitates the pump priming byfavouring the air purge by meansof a manual action.
For more information
seko is an International Group, developing, manufacturing and delivering its products in more than 50 countries,through its subsidiaries and an extended network of distributors, agents and authorized dealers.
seko is a leading manufacturer of dosing pumps and dosing systems with more than 40 years experience. This longactivity allowed seko to acquire a vast experience in diversified applications and to confirm its international successin many industrial fields through the supply of reliable solutions for the dosing, injection and transfer of liquids.
A Worldwide Group at your service
Ertek Yapı ve Makina Endüstri Ekipmanları San. ve Tic. Ltd. Ști.
Halkapınar Mah. Pamuk Plaza İș Merkezi 1082 Sokak No: 3 M 35170 Yenișehir Konak / İZMİR Tel: (0232) 469 43 53 Faks: (0232) 457 46 51
www.ertek.com • [email protected]
www.ertek.com