Operating Status Setup Wizard Operating ModeAP: Access Point modeRouter: Wireless router modeRepeater: Repeater modeBridge: Bridge modeClient: Client mode Network ParametersLAN LAN SettingPage set up the basic network parameters LAN port. MAC Address: 14-CF-92-CA-CE-04 IP Address: 192.168.1.253Subnet Mask: 255.255.255.0Save() Help() Wireless Setting Basic SettingAP modeSSID No.: TP-LINK_CACE04Channel: (Auto)Mode: 11bgn mixedFrequency bandwidth: (Auto)Turn on the radioTurn SSID broadcastOpen WDSSave() Help() Wireless Security SettingMAC Wireless MAC Address FilteringThis page set MAC address filtering to control computer access to this wireless network.MAC address filtering: Closed/Turned OnFiltering rulesBan MAC address list in force access to the wireless networkAllow MAC address list in force access to the wireless network Wireless Advanced Setting Host StateDHCP DHCP ServerDHCP DHCP ServiceThe router built-in DHCP server to automatically configure each computer LAN TCP/IP protocol.DHCP server: Disable Enable AutoAddress pool starting address: 192.168.1.100Address pool end address: 192.168.1.199Address lease: 120 Minutes (1 to 2880 minutes, the default is 120 minutes)Gateway: 0.0.0.0 (Optional)Default Domain Name: (Optional)Primary DNS server: 0.0.0.0 (Optional)Alternate DNS server: 0.0.0.0 (Optional)Save() Help()! Client List"#$ Static Address Assignment%& System Tools'& Diagnostic Tool() Software UpgradeBy upgrading the router's software, you will get new features.File name: wr710nv1-cn-up.binTFTP Server IP: 192.168.1.2The current software version: 4.19.105 Build 130415 Rel.45928nCurrent hardware version: W R710N 1.0 00000000Note: Please use a wired LAN connection port for software upgrades. Choose consistent with the current hardware version of the software upgrade. The upgrade process can not power off the router, otherwise it will cause damage to the router and can not be used. The upgrade process for about 40 seconds, when the upgrade is complete, the router will automatically restart.Upgrade()) Help()*+, Restore Factory Settings-./$ Backup SettingYou can save your settings here. We recommend that you back up your configuration file before modifying the configuration and upgrade the software.Path: No file chosen /$0((Load configuration file)Note: 1. After you import the configuration file, any original equipment user configuration will be lost. If you load the configuration file is incorrect, could cause the device can not be managed.2. The process of loading configuration file can not be closed router power, otherwise it will cause damage to the router and can not be used. Loading process for about 20 seconds, after the end of the load, the router will automatically restart.1234 Restart The Router5678 Change PasswordThis page modify the system administrator password, password length can not exceed 14 bytes.The original password: adminThe new password: ssssssConfirm New Password: ssssss%9: System Log;+7 Logout